Hi,
I've been do many flash last 24 hours on my Galaxy S4(Model SGH-I337M, Telus). Initialy, i've the factory stock rom, rooted. So, yesterday, i've decided to install Cyanogen mods nightly on my phone. Not the first time i've been used it on my phone. No problem before. So, this night, after a friend show me the release canditate release seem to be more stable, i've been try to put it on my phone. So, accidentaly wipe all the data on my phone. When i'm back home, i've put again the samsung original rom from my operator(4.2.2), found here, on the website, whit odin. All completed succefully, but i've noticed that the wifi won't turn on after the flash, and no sound from the speaker. So, i've put Cyanogen nigthlies again to test if it rom relative, but same issues here, no sound, but the wifi was working. The phone was very instable, so. Then, finaly, put the original rom again, without any rooting. Stuck on samsung logo, that i've finaly got fixed by clear the data and cache. But, no sound, and no wifi. Instable too.
Precision about phone: Unlocked whit the service mode(work), and enabled AWS whit a software and file(tutorial found here)
My question is: Anything else i can do to make my phone work fine again, and does it's possible to make the phone totaly stock? When i boot up, i've noticed that the phone, whit all rom i've try, said on samsung logo: Kernel is not sendroid enfonced, warranty status: kernel, so i can't go to return my phone on warranty whit that. How i can erase that line, and make my phone seem to be no modified?
Just to specify, it's not the first time i flash a phone. Do many flash, whit galaxy s2, s3 and s4, and sure, mine. Got try Cyanogen, stock, know how Odin work and all, try many rom, and before today, never has any problem to do turn back, but now, it's seem to be impossible.
Thank you very much for your help, very appreciated!
I would flash the stock firmware with odin again. After flashing do a factory reset in the stock recovery.
jd1639 said:
I would flash the stock firmware with odin again. After flashing do a factory reset in the stock recovery.
Click to expand...
Click to collapse
I've just try this. Flash the stock rom whit odin, and factory reset on original recovery after. Same, no wifi, no any sound.
Just see yesterday, when i'm flashing, i'm flashing on the bootloader in odin(whit the tar for the stock rom). Today, correct this by flash on the pda section, still not work. Found here on the forum the stock bootloader, rom, csc, and modem, but when i do this whit odin, odin said fail.
Thank very much, i think my phone is dead, and nothing to do to exchange it on warranty.
I think Kies has an emergency firmware recovery mode.... maybe that'll work.
Found a nice guide here: http://forum.xda-developers.com/showthread.php?t=2261153
saj222 said:
I think Kies has an emergency firmware recovery mode.... maybe that'll work.
Found a nice guide here: http://forum.xda-developers.com/showthread.php?t=2261153
Click to expand...
Click to collapse
Just try this. Kies is the worst software i've ever see. The software completely freeze random. When i go to the emergency menu, never, kies recognize my phone here. I've tried to plug my phone, no recognized. Tried without plug it, no recognized. When i plug it, kies said connection in progress, and can stay here 30 min.
I'm a idea of what is my problem. Before do install of cyanogen, i've been applied the samsung official 4.3 update, whit knox. And, according to what i read on many forum, knox is not ereasable, So, it's completely freeze my phone, and nothing to do.
Anyone have the factory telus bootloader and other factory stock items because i want to put it stock.
Thank.
Finally get problems fixed by take the TELUS stock 4.3 ROM and flash it whit Odin. After, can flash cyanogen nightlies again and the phone work well again.
Whit the stock ROM, didn't see any line on the Samsung boot logo that i've rooted. After root this appear again. Knox regardless of ROM installed said 0x1.
If anyone have a fix to put it again 0x0 very appreciated otherwise the phone work fine and thank you very much for your help.
dardares said:
Just try this. Kies is the worst software i've ever see. The software completely freeze random. When i go to the emergency menu, never, kies recognize my phone here. I've tried to plug my phone, no recognized. Tried without plug it, no recognized. When i plug it, kies said connection in progress, and can stay here 30 min.
I'm a idea of what is my problem. Before do install of cyanogen, i've been applied the samsung official 4.3 update, whit knox. And, according to what i read on many forum, knox is not ereasable, So, it's completely freeze my phone, and nothing to do.
Anyone have the factory telus bootloader and other factory stock items because i want to put it stock.
Thank.
Click to expand...
Click to collapse
I've seen worse software, it's no better or worse than iTunes.
Sent from my SGH-I337M using Tapatalk
dardares said:
Finally get problems fixed by take the TELUS stock 4.3 ROM and flash it whit Odin. After, can flash cyanogen nightlies again and the phone work well again.
Whit the stock ROM, didn't see any line on the Samsung boot logo that i've rooted. After root this appear again. Knox regardless of ROM installed said 0x1.
If anyone have a fix to put it again 0x0 very appreciated otherwise the phone work fine and thank you very much for your help.
Click to expand...
Click to collapse
can u plz give me link for the flash file u just flash
i have same problem here after i flash with 4.2.2 no sound and phone freez all time
i like to flash 4.3 so i can fix my phone
thanks
mps5566 said:
can u plz give me link for the flash file u just flash
i have same problem here after i flash with 4.2.2 no sound and phone freez all time
i like to flash 4.3 so i can fix my phone
thanks
Click to expand...
Click to collapse
This is the link i've found whit all the factory stock operator ROM. This is what rescue me.
http://forum.xda-developers.com/showthread.php?t=2269304
@Spacemonkie4207 never my itune was freeze, and i can do basic operation like transfer music or create playlist without any problem. My kies stay on connection in progress, and turn, turn, turn, but never connect. And when it connect, only one operation, and kies completely freeze, stop responding, need to close it, and open it again. Tried many cable, usb cable, reinstalling software, two other computer, but nothing to do.
I recovered back to stock from custom to 4.3 however if you do so, depending on carrier you could lose root and the ability to install custom recovery.
I would revert back to 4.2.2 (as it's knox free) go to samsungupdates (google it) and pull the 4.2.2 for your region and carrier. flash with odin 3.9
you'll lose root, but you can always perform again as long as not on 4.3 (with 4.3 u can still root if you remove all the knox stuff, u just lose warranty).
Az
Hi everyone, I´m really pissed about that issue; I´d really appreciate any help and thanks in advance to you all.
Story: I was using Sva´s rom for kitkat, everything normal, then I´ve seen Sasikas´s for lollipop and decided to try it out. I flashed the original firmware and then the custom, both via odin, used them normal as usual. For some reason, I decide to compare the new sva´s, also for lollipop and when I tried to flash, THE ISSUE BEGAN!
Issue: after doing the normal odin process, when the message “complete” shows up and the phone reboots, the bar of updating progress stop about 25% and the phone reboot to the normal mode, but only with a black screen. This is the screen I´m talking about: 3w generacionandroid.com/wp-content/uploads/2014/09/Android_updating.jpg
What I already tried and it didn´t work:
1 – factory reset after the “boot”; I think the problem is that the “system isn´t being write” so …
2 – different roms, both custom and stock; something interesting about this is that the point of the bar that resets the phone varies according to the rom I use, just as follow:
Rom lollipop: at 25% of the bar the system restarts;
Rom kitkat: the bar jumps from 25% to the end and boots the system until Samsung logo. I noticed that the carrier logo sound is cutted in the end.
I can freely install any recovery and enter dl mode.
By the way, the bootloader file must be flashed at pda or bl in odin?
Flash the bootloader file in the BL slot.
about the bootloader...
I´ve installed a bootloader to try the new lollipop in sva´s rom, maybe because of this I can´t flash anymore? I´ve found this info about bootloaders, could someone tell me if I´m thinkg right about it?
"In literal terms, bootloader is code that is executed before any Operating System starts to run. "
This way what I need is a bootloader for kitkat or previous? Where can i find it?
cry for help
almost givin up...
so, happy new year to everyone, I´ll wait until January to check any replies, otherwise selling for parts. ='[.
Shortening: I can enter recovery and dl mode BUT not getting to install roms;
I know I fixed selinux permissions once and installed a bootloader said to be to install a version of lollipop, that´s all new stuff I did.
Hello
My phone suddenly faced a bootloop, i was on cyanogen 13. just looping the Lenovo logo. Not able to get into recocery.. But QFIL detecting phone, and i even flashed the kitkat version of stock.. The process shows success but still im stuck at bootloop, even tried various method.. Your valuable help appreciated here
any help ?
mjtirur said:
any help ?
Click to expand...
Click to collapse
I think it's some hardware problem. The phone when first came to market has one of the best specifications. Other players had significantly higher prices of their phones providing same hardware. So, I think that Lenovo compromised on the hardware components to provide the SD410 and 2gigs of RAM for this price. I many times had problems with proximity and light sensor. Also the battery sometimes awkwardly dies giving very bad backup and only when you decide to replace it, it automatically starts working fine, for some time atleast. Then same thing happens again.
So, I think its problem with some hardware component. Otherwise, flashing from QFIL successfully, would have unbricked the phone.
Im facing the exact same problem as of now...
Managed to boot into recovery somehow and flashed a ROM but then again it went back to bootloop while unlocking the lockscreen
i have solution.
First off all remove battery then insert it again , after this press vol. Up + vol. Down + power on button by doing this your device completely boot recovery which one is now installed with software.
You said previously that your device is on only showning logo , its mean you have 60℅ chance to get your device in working condition.
Bro if you flashed stock kikat firmware then without flashing any software again just simply flash kitkat twrp recovery through adb . After this flash any kitkat rom ( recommended cm 11 by ed300 ) , huree you get your device live.
OR
If you recently flashed stock lolipop then without flashing any software again just simply flash lolipop twrp recovery through adb . After this flash any lolipop based or marshmallow based or naughat based rom , after that any rom from these android version will work , hurreee you got your phone alive but remember dont again directly flash kitkat rom over any lollipop , marshmallow, naughat rom otherwise you will again got bootloop . But you can directly only flash stock kitkat over stock lolipop or stock lolipop over stock kitkat only . I hope you understand what to do :good:
If you have any problem you can simply tell me via my WhatsApp no. - +91 9205097520 (indian no.) Or simply reply me on xda or simply mail me - [email protected] . I have other tricky solution steps ,which were really used and tested by me. Bye friends.......... And Don't forget to tell me about your device problem .
sasukay said:
I think it's some hardware problem. The phone when first came to market has one of the best specifications. Other players had significantly higher prices of their phones providing same hardware. So, I think that Lenovo compromised on the hardware components to provide the SD410 and 2gigs of RAM for this price. I many times had problems with proximity and light sensor. Also the battery sometimes awkwardly dies giving very bad backup and only when you decide to replace it, it automatically starts working fine, for some time atleast. Then same thing happens again.
So, I think its problem with some hardware component. Otherwise, flashing from QFIL successfully, would have unbricked the phone.
Click to expand...
Click to collapse
Okey Bro
nk41319 said:
First off all remove battery then insert it again , after this press vol. Up + vol. Down + power on button by doing this your device completely boot recovery which one is now installed with software.
You said previously that your device is on only showning logo , its mean you have 60℅ chance to get your device in working condition.
Bro if you flashed stock kikat firmware then without flashing any software again just simply flash kitkat twrp recovery through adb . After this flash any kitkat rom ( recommended cm 11 by ed300 ) , huree you get your device live.
OR
If you recently flashed stock lolipop then without flashing any software again just simply flash lolipop twrp recovery through adb . After this flash any lolipop based or marshmallow based or naughat based rom , after that any rom from these android version will work , hurreee you got your phone alive but remember dont again directly flash kitkat rom over any lollipop , marshmallow, naughat rom otherwise you will again got bootloop . But you can directly only flash stock kitkat over stock lolipop or stock lolipop over stock kitkat only . I hope you understand what to do :good:
Click to expand...
Click to collapse
Thanks bro... i will try this and let you know !!!
AmythD said:
Im facing the exact same problem as of now...
Managed to boot into recovery somehow and flashed a ROM but then again it went back to bootloop while unlocking the lockscreen
Click to expand...
Click to collapse
yes man gonna try the above solution.. lets c
Hello,I had this rom installed(https://forum.xda-developers.com/galaxy-s4/i9505-develop/rom-super-wizcyan-29-nov-15-t3259562) and since I'm kind of noob I tried to downgrade to this one ( https://forum.xda-developers.com/showthread.php?t=2454205). I flashed it in TWRP recovery and when the phone finished and restarted i got into a bootloop( i think that's how it's called) - the samsung logo with the light from behind but that's it. I cannot open the TWRP recovery anymore,I cannot restore the stock firmware with KIES, I tried to restore 5.0.1 lollipop stock firmware through ODIN with and without PIT file and also 4.4.2 stock ( i did not find one for my country - Romania, I found one for Germany). Please help me with this issue..I will install any software and just leave it if it works..I just need my phone .. yep,desperate ..)
I'm sorry if I broken any rule by opening a new thread I'm just desperate to solve this issue..been working at it for almost 4 hours..
L.E. Odin says there is no partition when trying to flash the stock roms so i used this PIT file ( CSB_signed_Fusion3_EUR_0325_V2.pit)
Have you tried Smart Switch?
Pwnycorn said:
Have you tried Smart Switch?
Click to expand...
Click to collapse
I don't really know what that is or how should I do it )
Problem fixed. I flashed from a different pc a complete stock rom(bootloader,pit file,csc and all of the other stuff) and it worked perfectly.
I'm trying to flash roms on my N9005 but I'm not able to succeed.
I tried first flashing the Fougat rom, I got stuck at Galaxy note 3 bootloop
I tried the Lineage 15 rom. It required TWRP v3.2.1, tried flashing it, but it didn't load
Tried flashing MagMa NXTeam's rom, same with fougat.
Im sure %100 I followed devs steps to flash but nothing is working for me!
Help devs, please!!
Did you confirm the model # in download mode?
Did you try flashing other ROMs that work with an older version of TWRP?
The phone is running the latest bootloader and modem?
1 Its not a N9005 or a fake .
2 User flashing stuff not for a N9005 .
3 Possible damage to a partition .
Judged by previous multiple users posts its likely partition damage .
https://forum.xda-developers.com/search.php?searchid=446754566
same for me since i change complete screen LCD+tactil.
Original rom work great but no custom rom. I bought complete screen on china ebay store.
Is screen version is really same that mine ? how to verify ?
I've read through a couple of your posts you've made on several ROMs and even TWRP, it sounds like you are flashing the wrong version for your phone. In several instances you've asked whether to install hlte, in the TWRP thread it seems like you're just letting the phone reboot (which re-installs stock recovery). You might either want to research more into what you are doing before you brick/damage your phone or leave your phone on stock.