hey guys m unable to flash gionnee firmware using gnqc
it giving an error " Open COM port fails, please check if other programs are using the COM port [Diagnostics]! ! ! "
what to do now???????? plzz help
See my tutorial, work good!
hackvier1 said:
See my tutorial, work good!
Click to expand...
Click to collapse
But i didn't find any link about your tutorial. Please give me the link or anything which can be help.
Shakil Hossain said:
hey guys m unable to flash gionnee firmware using gnqc
it giving an error " Open COM port fails, please check if other programs are using the COM port [Diagnostics]! ! ! "
what to do now???????? plzz help
Click to expand...
Click to collapse
same error for gionee e7
pls advice
smartyn13r said:
same error for gionee e7
pls advice
Click to expand...
Click to collapse
reverted to stock using http://androidxda.com/download-gionee-stock-rom-models
smartyn13r said:
reverted to stock using
I have tried with this method but still showing "Open COM port fails, please check if other programs are using the COM port [Diagnostics]! ! !" when i'm trying to download the firmware.
Click to expand...
Click to collapse
The message means the com port is in use by some other device, in my case it was arduino i suggest you uninstall all com ports then try again.there can be other issues as well
If not a clean windows 7 32 bit will definitely work.
try to use the remove drivers
Shakil Hossain said:
smartyn13r said:
reverted to stock using
I have tried with this method but still showing "Open COM port fails, please check if other programs are using the COM port [Diagnostics]! ! !" when i'm trying to download the firmware.
Click to expand...
Click to collapse
try to use the remove drivers exe file
disconnect phone
restart PC
connect phone and Check for any installed drivers if found uninstall by checking the option delete drivers through device manager
make sure your PC has only one version of drivers for the phone
restart PC and install drivers
and follow the given link
Click to expand...
Click to collapse
Related
Hi,
I have Windows 7 Home Premium.
I have installed stock SE Updater app. Then I have been able to upgrade my X8. It has succeed but I couldn't use adb. "adb devices" sad: no devices found
Ok.
I have this driver: http://developer.sonyericsson.com/wportal/devworld/downloads/download/dw-x8drivers?cc=gb&lc=en
I have installed it. Now adb works but SE Updater does not. What the hell?
I tried to remove drivers and plug in the cable and look for the driver manually without success.
SEMC USB FLASH device doesn't work for me. Win7 sometimes see it as SEMC HSUSB FLASH device. I don't know what's wrong.
Anybody knows a way to purge my evil drivers and install correct ones?
Without Win7 reinstall of course. Anyway my Win7 works perfectly but this driver issue.
Thx guys
Driver on dev.se site is for ADB. You have to download this driver.
blagus said:
Driver on dev.se site is for ADB. You have to download this driver.
Click to expand...
Click to collapse
I had previous version of gorgon gate's driver package. I have installed the new one. And I have cleaned the registry with CCleaner. It seems the cable driver works now.
Thx.
Blagus said:
Driver on dev.se site is for ADB. You have to download this driver.
Click to expand...
Click to collapse
Please reupload download link
Reupload link pls .
Reupload link pls .
WinXP driver h**p://dl-developer.sonymobile.com/drivers/X8_drivers.zip
EASY NAND V2 *UPDATED*
A very easy to use tool to flash your HTC HD MINI and install Cyanogenmod 7(NAND)
I updated my tool for newbies with new schlund's rom here.
Just run "Easynand.bat" and follow instructions.
Hope you like it.
(included google windows usb drivers)
Link : http://ge.tt/8sGLFqC?c
IMPORTANT ! use that fix
Credits :
schlund - for his photonic CM 7.2
cotulla - for his initial 2.6.29 kernel port
Alexander Tarasikov - for his initial lkbootloader
the whole xda-photon people for the common project
erickeir said:
Hello my name is Eric and i'm french ! I'm new here
So i created a small .bat script for windows to flash your Htc HD mini phone... it's for newbies, it's very easy to use ! also modified some little things into the image
I tested everything at least 10 times !
What is working for now ?
WORKING :
GSM Phone
WIFI (tested 100000 times and working !)
3D
Bluetoth
Battery indicator
Suspend (sleep mode)
Charging
Sensors
Image capture
NOT WORKING :
FM radio
Video
Mobile data
fast battery drain....
Enjoy !
Thanks to all xda community specialy sp3dev, schlund and derefas !
megaupload(dot)com/?d=EG2SFSU8
Click to expand...
Click to collapse
Amazing!!! Now CynogenMod 7.1 works for me no bootloop!!! Yhea! A Thanks for you
thanbk u very much, but when i run haret and try to get in to fastboot it wirtes:"[irq]: no handler for irq=0"
and nothing happens can u help me?
edit: i tried it with 2 other sd cards and it didnt work,if its even related..
that's not a problem, just connect ur phone to ur pc using the usb cable and press any key on the script to continue flashing !
liorderei said:
thanbk u very much, but when i run haret and try to get in to fastboot it wirtes:"[irq]: no handler for irq=0"
and nothing happens can u help me?
edit: i tried it with 2 other sd cards and it didnt work,if its even related..
Click to expand...
Click to collapse
if your host pc is windows, you have to install a proper driver for the hd mini
if it's linux, no driver is needed.
Grab the driver here>> http://dl.dropbox.com/u/18807579/Photon_NAND_Tools/driver2.rar
I tested with Windows 7 x64, it works fine.
EDIT: Link updated, the driver is now fetched from the newest Android SDK. It should work well
Thank yout peter08po but i'm on windows and i had the same "error" and i didn't install any driver and every thing work fine for me..
erickeir said:
NOT WORKING :
FM radio
Video
Mobile data
fast battery drain.... (Battery very good version of sd????)no wi-fi
Enjoy !
Thanks to all xda community specialy sp3dev, schlund and derefas !
megaupload(dot)com/?d=EG2SFSU8
Click to expand...
Click to collapse
can not a video guide?
you can go back to wm? how?
Hello Eric will give this to work in the future with derefas, schlund, sp3dev releases?
baggino said:
you can go back to wm? how?
Click to expand...
Click to collapse
I'd like to know also
peter08po said:
if your host pc is windows, you have to install a proper driver for the hd mini
if it's linux, no driver is needed.
Grab the driver here>> http://dl.dropbox.com/u/18807579/Photon_NAND_Tools/driver.zip
I tested with Windows 7 x64, it works fine.
Click to expand...
Click to collapse
thank you so much!! ill try it right away
EDIT: it worked but now im facing another problem...when it starts copying files my computer restart itself right away..
My wifi is not working cryyyin ! :/
#edit: and if i want to connect with my pc cable, on my hd mini only the usb debugging starts.. i hope i can help you?
liorderei said:
thank you so much!! ill try it right away
EDIT: it worked but now im facing another problem...when it starts copying files my computer restart itself right away..
Click to expand...
Click to collapse
That's weird... maybe a problem with the driver... do u have a x84 windows ? Maybe the driver works only for x64... i don't know this driver..
The wifi should work ! maybe a duplicated mac adress... try this :
1. turn on wifi
2. lunch terminal and type : su
3. type: busybox ifconfig eth0 hw eth "0E:00:A0:03:1E:FF"
4. try to reconnect
You can go back to wm with RUU from HTC website : htc(dot)com/europe/help/htc-hd-mini/#download
1. turn off ur device
2 turn it on by pressing power button and vol- together, u should have a multicolor screen, connect ur device to your pc.
3. run the file u downloaded and follow the steps at the screen.
To disable debug mode :
when u connect your phone to your pc u will have a notification just touch it and deactivate usb debug.
I have win xp i think its x32
Sent from my HTC Liberty using XDA App
mmm... peter08po updated the drivers link... try the new driver...
erickeir said:
The wifi should work ! maybe a duplicated mac adress... try this :
1. turn on wifi
2. lunch terminal and type : su
3. type: busybox ifconfig eth0 hw eth "0E:00:A0:03:1E:FF"
4. try to reconnect
Click to expand...
Click to collapse
Hey, if i type "busybox ifconfig eth0 hw eth "0E:00:A0:03:1E:FF""
terminal say "ipconfig: applet not found"
and wifi still doesnt work
Am i the only person ?
Vogelhaus7 said:
Hey, if i type "busybox ifconfig eth0 hw eth "0E:00:A0:03:1E:FF""
terminal say "ipconfig: applet not found"
and wifi still doesnt work
Am i the only person ?
Click to expand...
Click to collapse
be careful it's ifconfig and not ipconfig !
now "ifconfig: SIOCSIFHWADDR: No such device" ? hmm
How do I get back to windows mobile? ... If you can write instructions in Italian ... thanks!
I really dont know what to do..i tried two computers,diffrent drivers and sd cards but it doesnt matter what i do,i get the same result..when i try to flash it the computer restart itself.pls help me
Sent from my HTC Liberty using XDA App
erickeir said:
You can go back to wm with RUU from HTC website : htc(dot)com/europe/help/htc-hd-mini/#download
1. turn off ur device
2 turn it on by pressing power button and vol- together, u should have a multicolor screen, connect ur device to your pc.
3. run the file u downloaded and follow the steps at the screen.
Click to expand...
Click to collapse
Doesnt work, i get these error message :/ i hope u doesnt destroyed my phone :/
http://imageshack.us/f/864/htchdmini.png/
@Vogelhaus7,
I had the same error when i tried to go back on wm.
In fact, you can't take any roms.. the rom must be for YOUR country.
Example:
I'm french then i tried a rom with "FRA" or "Europe" in title, but same error: "bad vendor id"
I forget that one day i tried to put my serial number on HTC website, and my phone was DEUTSCH.
Then i take a Deutsch ROM with "DE" in title.
reboot with tricolor screen, put cable....
It works !
Make sure you have the right rom
Hi guys i have problem in bootloader after installing windows 7.. i want to flash mag then recovery and flash android rom again..but it stays in serial after connecting usb cable.... no usb! i have formated the sd card with nokia and i cant move on!!!!im stuck here 1 month!!!!
(qualcomm cdma technologies msm) see the pc..
wrong place to post but he is in trouble, if we can help, then do it.
Here is my suggestion: Check your USB driver for the PPC or install ActiveSync. I think the issue is only your PC doesn't recognize the windows 6.5 handheld device.
huhjun said:
wrong place to post but he is in trouble, if we can help, then do it.
Here is my suggestion: Check your USB driver for the PPC or install ActiveSync. I think the issue is only your PC doesn't recognize the windows 6.5 handheld device.
Click to expand...
Click to collapse
.........how?? its easy????
I fix it i found it.......you where right both of you.....hehe.....now im happy..... thank guys......sorry for the violention of rules...
110718 said:
.........how?? its easy????
Click to expand...
Click to collapse
not sure what the problem was...u need activesync?? http://www.microsoft.com/download/en/details.aspx?id=15
walidhazem said:
not sure what the problem was...u need activesync?? http://www.microsoft.com/download/en/details.aspx?id=15
Click to expand...
Click to collapse
Yes...thank you...
Moved. Please use the report button or send me a PM. Thanks
1, change an other usb cable...
2, u need a correct usb drivers..
Hi,
I have bought a Nexus 4, and im trying to settings it for my android developpement ..
So i have tried to install the ADB driver manually, and it give me this message : Paramètre Incorrecte
I have tried differents tutos with no success :/
In my registry i have 4 folders :
VID_18D1&PID_4EE2
VID_18D1&PID_4EE2&MI_00
VID_18D1&PID_4EE2&MI_01
VID_18D1&PID_4EE6
I have the 4.2.2 version , and the lasted Android SDK,ADB. And im in Win Vista
And the MTP is correctly installed ( i can access to my folder in the phone)
What i'm doing wrong ?
And thanks in advance,
Any help
Dchar said:
Any help
Click to expand...
Click to collapse
Try using wugfresh toolkit,it will install the drivers and test if they work
Use the Universal Naked Driver
http://forum.xda-developers.com/showthread.php?t=1998650
Hi guys , my android is not shown when i connect with the usb cable because i dont have any drivers , but when i try to install this drivers virsion 1.5.29.0 i get error
"The mobile phone is in use. to installl normally, you need to remove the device and restard the computer. Please run the samsung usb driver for more mobile phones installer again after restarting" thats the error i get when i try to install the drivers and the phone is not even connected.
AndroidFanuser said:
Hi guys , my android is not shown when i connect with the usb cable because i dont have any drivers , but when i try to install this drivers virsion 1.5.29.0 i get error
"The mobile phone is in use. to installl normally, you need to remove the device and restard the computer. Please run the samsung usb driver for more mobile phones installer again after restarting" thats the error i get when i try to install the drivers and the phone is not even connected.
Click to expand...
Click to collapse
1. go to programs, uninstall anything with samsung, kies including.
2. restart pc
3 install samsung drives
4. ask someone to move the thread to Q&A section.
5 99883354
spamtrash said:
1. go to programs, uninstall anything with samsung, kies including.
2. restart pc
3 install samsung drives
4. ask someone to move the thread to Q&A section.
Click to expand...
Click to collapse
Still same error while trying to install the drivers
AndroidFanuser said:
Still same error while trying to install the drivers
Click to expand...
Click to collapse
one more: go to control panel -> device manager. If you see anything like samsung, android phone etc (check the usb tree there) - delete it (uninstall drivers) and reset PC.
spamtrash said:
one more: go to control panel -> device manager. If you see anything like samsung, android phone etc (check the usb tree there) - delete it (uninstall drivers) and reset PC.
Click to expand...
Click to collapse
I see samsung just when i connect my phone , i deleted it still the same... Cant install new drivers it says that mobile in use
AndroidFanuser said:
I see samsung just when i connect my phone , i deleted it still the same... Cant install new drivers it says that mobile in use
Click to expand...
Click to collapse
If you uninstalled Kies/3 and you deleted/uninstalled the drivers too:
1. Go to Menu Start of Windows or press Windows Key + R.
2. Write there %appdata% and press ENTER
3. Delete there the SAMSUNG folder
4. Follow this guide: HERE
5. Enjoy :highfive:
Joku1981 said:
If you uninstalled Kies/3 and you deleted/uninstalled the drivers too:
1. Go to Menu Start of Windows or press Windows Key + R.
2. Write there %appdata% and press ENTER
3. Delete there the SAMSUNG folder
4. Follow this guide: HERE
5. Enjoy :highfive:
Click to expand...
Click to collapse
i dont know what to do man still same error , but when i launch it now i see that the samsung usb driver for mobile phone are installed and it says if i want to keep the install anyways? but i unistalled it i cant find any memory of samsung drivers in my pc
AndroidFanuser said:
i dont know what to do man still same error , but when i launch it now i see that the samsung usb driver for mobile phone are installed and it says if i want to keep the install anyways? but i unistalled it i cant find any memory of samsung drivers in my pc
Click to expand...
Click to collapse
Press ctrl+alt+supr and see if you have runing any Samsung/Kies process and close it.
Joku1981 said:
Press ctrl+alt+supr and see if you have runing any Samsung/Kies process and close it.
Click to expand...
Click to collapse
nope nothing i see there usb 3.0 monitor nothing belong to samsung there