Related
I'm installing the new firmware but i had an issue with odin...
I flashed again 4.4.2 but in download mode, the last line you can see " UDC START" in colour red... Is this normal? I think the phone works good, but i don't know why put on this...
Anyone have this new line??
I have the same problem with a N9005 I guess it was Hong Kong version for the kanjis in the back, but is stuck in odin mode with the UDC START line
UDC Start info.
Ok gent's little more knowledge about "udc start" I am guessing that the problem became clear as you installed 4.4.2 KK.
So did I and came across UDC Start the second time I booted into download mode.
As I played around i became aware that the "UDC Start" mode locks the download loader to certain criteria. This would be 4.4.2 KK,
so anything under 4.4.2 will get a MASSIVE RED FAIL. That including the CWR/TWRP recoveries and ROOT files.
So just to specify, yes phone is now locked/bricked to 4.4.2 KK software only.
Therefore I would please like some help to get the udc start away!? If anyone can help.
If I shared some light to the darkness please say thanks.:good:
Try this out:
Worked for me on a Hong Kong 16GB N9005 which was stuck on the 'Samsung Galaxy Note 3' screen after getting a 'Invalid: ext4 image' or 'Repartioning failed' errors while installing 4.4.2 OFFICIAL (Single File ROM) via Odin.
Binary: Custom
Knox: 0x1
Method:
In Odin mode
1. Flash the latest cf-autoroot (Kitkat support) [http://download.chainfire.eu/352/CF-...x-smn9005.zip]
2. Flash the Chenglu's latest CWM - 6.0.4.6 (the one that supports KitKat) http://forum.xda-developers.com/show....php?t=2454079
Download Sweet Rom and place it in ExtSDcard (http://forum.xda-developers.com/show....php?t=2487425)
I tried external sd-card with various format and could not install the ROM. After format my SD Card to FAT32, the ROM can be installed.
On Device
1. Boot in to Recovery mode by Volume up + Home + Power
2. Wipe Factory reset / Dalvik Cache
3. Format /System (under "mount and storage" menu) [IMPORTANT STEP]
4. Install Rom from SD Card
5. Say your prayer. You'll need it. (The installation could take sometimes. If the device screen shows Samsung boot animation, you're half way there)
How is that going to take away the udc start?
I have UDC Start in Odin/Download mode... It hasn't affected my flashing of custom ROMs nor Stock, everyone on KK has it.
Ok, but why if i try to install a previous version of TW rom 4.3 i get a massive fail?
But all the rest works?
Thanx in regards.
FdeKlerk said:
Ok, but why if i try to install a previous version of TW rom 4.3 i get a massive fail?
But all the rest works?
Thanx in regards.
Click to expand...
Click to collapse
Because you are locked into the new Bootloader (NA6) and it's unable to downgrade
So I am guessing there is no way to downgrade the boot-loader without unlocking it?
FdeKlerk said:
So I am guessing there is no way to downgrade the boot-loader without unlocking it?
Click to expand...
Click to collapse
There's no way full stop. Samsung have blocked downgrades within the bootloader itself.
Wow now that's some sort of a problem.
My 4.4.2 works but i love xposed modules to make everything transparent and as of yet kitkat does not support that.
And now i a stuck on 4.4.2..
But thanx for the assist.:good:
Same Problem with E330s
ManuH8 said:
I'm installing the new firmware but i had an issue with odin...
I flashed again 4.4.2 but in download mode, the last line you can see " UDC START" in colour red... Is this normal? I think the phone works good, but i don't know why put on this...
Anyone have this new line??
Click to expand...
Click to collapse
Hi. I have a unrooted SHV-E330 (I9506 to some) I was running the unrooted firmware and updating with Kies up until yesterday when the update to came up. I ran it as with every other update however on self rebooting the phone now goes to ODIN MODE (in red) and UDC Start (in red) i'm a root virgin and was happy with the phone running as it was AnTU TU score 36118 with the Korean bloatware running in the background. From what I have picked up after 4.3 firmware update to 4.4.2 there is no going back. I tired to root with earlier versions of firmware but get fail every time. I Picked up a zip SKT-E330SKSUCNA7 wich goes as far as checking the MD5 file successfully in Odin 3 v3.09. everywhere I look on the web it states the com box should be yellow however mine is blue.
After MD5 successful I get leave CS. I click start I get 'Get PIT for mapping. There id no PIT partion followed by a red box and the'FAIL!' box with 'all threads completed Failed 1.
I have never rooted a phone and a buff mentioned that I will not regret it. I figure thart i'm doing something wrong as there was no PIT file with the firmware.
On first trying a firmware recovery in Kies because the phone is stuck In ODIN MODE it will not recognise the phone even though the USB drivers are installed.
If their is a person out there that could talk me through rooting trough the stuck ODIN MODE I would appreciate contact.
I gather that I have no choice but to try ODIN MODE on phone as that's where the phone is stuck. Removing battery etc has been tried to death.
summan971 said:
Hi. I have a unrooted SHV-E330 (I9506 to some) I was running the unrooted firmware and updating with Kies up until yesterday when the update to came up. I ran it as with every other update however on self rebooting the phone now goes to ODIN MODE (in red) and UDC Start (in red) i'm a root virgin and was happy with the phone running as it was AnTU TU score 36118 with the Korean bloatware running in the background. From what I have picked up after 4.3 firmware update to 4.4.2 there is no going back. I tired to root with earlier versions of firmware but get fail every time. I Picked up a zip SKT-E330SKSUCNA7 wich goes as far as checking the MD5 file successfully in Odin 3 v3.09. everywhere I look on the web it states the com box should be yellow however mine is blue.
After MD5 successful I get leave CS. I click start I get 'Get PIT for mapping. There id no PIT partion followed by a red box and the'FAIL!' box with 'all threads completed Failed 1.
I have never rooted a phone and a buff mentioned that I will not regret it. I figure thart i'm doing something wrong as there was no PIT file with the firmware.
On first trying a firmware recovery in Kies because the phone is stuck In ODIN MODE it will not recognise the phone even though the USB drivers are installed.
If their is a person out there that could talk me through rooting trough the stuck ODIN MODE I would appreciate contact.
I gather that I have no choice but to try ODIN MODE on phone as that's where the phone is stuck. Removing battery etc has been tried to death.
Click to expand...
Click to collapse
Your phone does not have a pit file on it. Odin downloads the pit file from the phone to make sure that all the partitions are correctly flashed.
Try ticking the 'Re-partition' box in odin while flashing. Though I don't really think it will help, because your single file ROM most probably does not contain the pit.
Your best bet is to find somebody else with the same model as you, and get a pit from them.
PS- You are in the wrong forums.
[COLOR=[/COLOR]
feralfire said:
your phone does not have a pit file on it. Odin downloads the pit file from the phone to make sure that all the partitions are correctly flashed.
Try ticking the 're-partition' box in odin while flashing. Though i don't really think it will help, because your single file rom most probably does not contain the pit.
Your best bet is to find somebody else with the same model as you, and get a pit from them.
Ps- you are in the wrong forums.
Click to expand...
Click to collapse
do not tick re-partition without having a pit file, you will get a brick.
Feralfire, you just broke the first law of flashing with ODIN... If you don't know what to do then don't say anything...
Thanks for caring XDA developers - i fixed it
FeralFire said:
Your phone does not have a pit file on it. Odin downloads the pit file from the phone to make sure that all the partitions are correctly flashed.
Try ticking the 'Re-partition' box in odin while flashing. Though I don't really think it will help, because your single file ROM most probably does not contain the pit.
Your best bet is to find somebody else with the same model as you, and get a pit from them.
PS- You are in the wrong forums.
Click to expand...
Click to collapse
Hey thanks for the response the same day I managed to fix the problem a hour ago after 24 hours of banging my head on a wall.
I uninstalled all software including Odin remembering that ODIN MODE was the only option. most of the Boot Operating system was in Korean.
I followed a you tube guide from another root and noticed that although ODIN MODE and UDC start are new (according to other forums) that the other information insinuated that the screen I was looking at was also the download mode.
I reinstalled Kies and rather than asking me for the emergency recovery code it reset and was asking for the Model and serial number. After which it stated it could not recover the device only reinstall the stock firmware. I selected OK. the phone came back to life and reinstalled all data from cloud.
now on 4.4.2 and still thinking about rooting
however I must warn anyone that comes across the unlocker website that states its mod allows for E330S root. that clockwork mod does not cater for E330S.
ultramag69 said:
[COLOR=[/COLOR]
do not tick re-partition without having a pit file, you will get a brick.
Feralfire, you just broke the first law of flashing with ODIN... If you don't know what to do then don't say anything...
Click to expand...
Click to collapse
Au contraire, I have done a lot of research on pit file and played around a lot. Check out my threads.
If you tick re-partition without having a pit, it just gives you an error. Maybe in the olden days, it might have been an issue (I haven't always been a Samsung guy), but definitely not now.
FeralFire said:
Au contraire, I have done a lot of research on pit file and played around a lot. Check out my threads.
If you tick re-partition without having a pit, it just gives you an error. Maybe in the olden days, it might have been an issue (I haven't always been a Samsung guy), but definitely not now.
Click to expand...
Click to collapse
If so, then make sure they know which version of ODIN to use as this is the fastest way to kill a phone I know...
Right from the very first this was a cardinal sin but then you didn't have a phone anymore or much sympathy either... But to tell a noob to do this was in effect saying "put your phone in front of a steamroller, it'll be ok after its gone over it a couple of times"...
ultramag69 said:
If so, then make sure they know which version of ODIN to use as this is the fastest way to kill a phone I know...
Right from the very first this was a cardinal sin but then you didn't have a phone anymore or much sympathy either... But to tell a noob to do this was in effect saying "put your phone in front of a steamroller, it'll be ok after its gone over it a couple of times"...
Click to expand...
Click to collapse
He was using 3.09. Don't overcomplicate things.
But anyway, I apologize for making people put their phones in front of 20 ton vehicles.
re Pit File
FeralFire said:
Your phone does not have a pit file on it. Odin downloads the pit file from the phone to make sure that all the partitions are correctly flashed.
Try ticking the 'Re-partition' box in odin while flashing. Though I don't really think it will help, because your single file ROM most probably does not contain the pit.
Your best bet is to find somebody else with the same model as you, and get a pit from them.
PS- You are in the wrong forums.
Click to expand...
Click to collapse
I found this KS01LTE_KOR_SKT_32G.pit and ran it in Odin running download mode and it worked. It appears there are several Korean versions of the right ROM and unless the right rom is used flash in odin does not work.
I'm starting to sound like i know what i'm talking about!
summan971 said:
I found this KS01LTE_KOR_SKT_32G.pit and ran it in Odin running download mode and it worked. It appears there are several Korean versions of the right ROM and unless the right rom is used flash in odin does not work.
I'm starting to sound like i know what i'm talking about!
Click to expand...
Click to collapse
The different ROMs must have different pits. That would explain why only some specific ones work.
Anyway, congratulations.
Hi,
Currently there is not much on the phone, at least nothing to start up. I had CM, but had to go back so I tried the guide posted on this forum. With little success. So now im not sure where I stand as the phone is in a state without a ROM. When I try to start up normally i get "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Anyone can help me with installing fresh stock Samsung ROM?
Thanks in advance!
Sincerely,
Tho_kva2
Which was your last stock rom bevor you installed cm?
And which stock rom did you try to flash after cm?
Did they had the same product key?
Was the flashing process successful or did odin say "fail"?
And how is your current knox status? 0x1?
Send from my Galaxy S4 using Tapatalk
Not sure, but my phone was up to date with the latest update from Samsung.
I first tried to use "Norway (telenor)" first as, and when that failed I tried "Norway 4.4.2" Both found in the second post of the Guide.
Product key?
Odin said Fail. I tried multiple times with different odin versions and with PIT file.
Is it the "Knox warranty void" is so 0x1
And the latest original firmware running on your phone was it a Norway (telenor) firmware?
With product key i meant the csc.
The old firmware and the one you want to flash now have to have the same csc, i guess.
You can also flash a custom recovery and try to wipe and then flash again.
Send from my Galaxy S4 using Tapatalk
I'm not sure what the original firmware was, but it was the stock firmware i got with the phone when i bought it + updates.
CSC is TEN (Norway)
I do not know how to do a custom recovery, im a total noob on this subject of flashing and modding phones. Got any kind of guide or directrions to point me in? Sorry for not knowing squat, but hope you or someone else here can help me!
Hi,
okay, before you flash a recovery, you can try to flash another firmware but it have to be android 4.4.2 norway TEN
Did you also follow this note here?
"Odin troubleshooting:*If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer."
When odin will continue failing then try this.
http://www.usp-forum.de/downloads.php?do=file&id=1531
This is a 4 part open Europe firmware. Try to flash it...First time without pit,when odin failed try with pit...
If nothing helped, then you can install a custom recovery.
You once installed a recovery, before you flashed CM, remember?
But I will look for a guide and the right files.
Send from my Galaxy S4 using Tapatalk
It worked with the European version! Cheers mate Oh, it was without the pit.
Atleast android is installed hehe. but keyboard keeps crashing so cant type anything, and I cant turn on wifi; I get "Security notice, your device's security has blocked an action that is not permitted. No further action is required" -Knox Notification Manager.?
Oh and I got no SIM card to try at the phone atm. will get it later
So waht should be the next step?
Did you rooted this firmware already?
Try to fullwipe again. I thought this message only pops up, when the devise is rooted and Knox still not deleted... mysterious
Send from my Galaxy S4 using Tapatalk
I did not root it. I will try to wipe
Edit:
****ed up. Tried flashing the same again, and it failed lol.. so now im back to where I was before the phone "worked" again.
So I think I should get a recovery. Any thought?
Lol that's crazy. Also tried 4 part with pit?
And when you flash a Norway firmware again? Maybe it will work now, i don't know what's going on there
http://forum.xda-developers.com/showthread.php?t=2397108
This is CWM recovery for i9505, you have to flash the .tar file with odin in PDA or AP. It's your choice, whether you install the touch or non touch version.
Edit: anything new?
Send from my Galaxy S4 using Tapatalk
Hi
Flashed CM12 and all was good, but i didnt get 4G+ with it and couldnt get the gear s to connect. So i downloaded a file from sammobile to get it to 5.0.1. Started up odin3 v1.85 and it says failed everytime. on the cell it says "odin : invalid ext4 image" Anyone that could point me in the right direction? Trying to download an older version now 4.4.4 and that didnt work either... Someone please help me?
jiframnes said:
Hi
Flashed CM12 and all was good, but i didnt get 4G+ with it and couldnt get the gear s to connect. So i downloaded a file from sammobile to get it to 5.0.1. Started up odin3 v1.85 and it says failed everytime. on the cell it says "odin : invalid ext4 image" Anyone that could point me in the right direction? Trying to download an older version now 4.4.4 and that didnt work either... Someone please help me?
Click to expand...
Click to collapse
Have you tried hooking it up to your PC and using Kies recovery? Thats got me out of a couple of jams on Sumsung phones over the years.
Yeah, and it sits forever without connecting. . This sucks, i have to use my s6 edge and it sucks...
jiframnes said:
Yeah, and it sits forever without connecting. . This sucks, i have to use my s6 edge and it sucks...
Click to expand...
Click to collapse
Lol I wish I had an s6 as a "backup phone". Anyway, try a different version of Odin. 1.85 is way old. 3.07 & 3.09 work pretty well. Also try downloading the firmware again, perhaps some part of it got corrupted. If nothing else there is a flashable version of lollipop, you could flash it (or restore a TouchWiz backup if you have one) to get it back on TouchWiz and then Odin it. (Sometimes I've had trouble with Odin coming back from cm/aosp roms so I flashed a TW rom & Odin worked fine)
jiframnes said:
Hi
Flashed CM12 and all was good, but i didnt get 4G+ with it and couldnt get the gear s to connect. So i downloaded a file from sammobile to get it to 5.0.1. Started up odin3 v1.85 and it says failed everytime. on the cell it says "odin : invalid ext4 image" Anyone that could point me in the right direction? Trying to download an older version now 4.4.4 and that didnt work either... Someone please help me?
Click to expand...
Click to collapse
You never said u put the phone in Download mode...did you??? Cheers:fingers-crossed:
If not...remember power off...then...power+home+volume down all together...the open odin...3.09...
Take a look at my posts on page 3 of this thread.
http://forum.xda-developers.com/note-4/general/sm-n910f-official-roms-mega-links-t3091605/page3
It seems like your problem is the same as mine. Does Odin fail on the hidden.img.ext4 with an error about incorrect image size?
If it does, try flashing a ROM with your original CSC.
If that produces the same error, flash one with a smaller hidden.img.ext4 file. The BTU ROM seems to have a quite small one.
By the way, what's your original CSC?
Can i kiss you???
way forward
Can i flash 5.0.1 now or does it come OTA??
Hey guys. As title says I'm new to this but my dad bought a used rooted S6 Edge + (G928F) and now it's bricked for whatever reason.
It started off by saying "dm-verity verification failed" and that it's locked in "FRP lock".
I tried using Odin3 v3.10 to reinstall the firmware by downloading it from sammobile and did so successfully.
Here's where the problem part is coming. According from what I've heard and read, it's supposed to be working now. However, it's not, and a new message has appeared saying "Need to check DRK first."
Now, I've tried looking around for how to fix DRK but I haven't found anything that worked.
I'd like to remind you that I'm new to this so newbie-friendly words and patience would be greatly appreciated.
hi alexaziz....its not ur fault u didn't brick the phone...the guy who rooted this phone, he made the phone to show this error....unfortunately only fix is to use some professional tools like z3x box.....but don't b sad u can try 2 things.... just to hide it and bypass it.....
1....install stock firmware....wipe cache ..............download kernel file like 928-FKLSI-ODIN or arter97-g928fcig-.....and try 1 of them with odin (use AP in odin)...it should boot normally if not then try 2nd option..
2......Download official firmware for your device from sammobile. Extract your firmware files from the TAR..... delete cache.img & repack your firmware. now flash the repackaged firmware via ODIN.....thnx
wish u good luck :good:
papu_yaar2004 said:
hi alexaziz....its not ur fault u didn't brick the phone...the guy who rooted this phone, he made the phone to show this error....unfortunately only fix is to use some professional tools like z3x box.....but don't b sad u can try 2 things.... just to hide it and bypass it.....
1....install stock firmware....wipe cache ..............download kernel file like 928-FKLSI-ODIN or arter97-g928fcig-.....and try 1 of them with odin (use AP in odin)...it should boot normally if not then try 2nd option..
2......Download official firmware for your device from sammobile. Extract your firmware files from the TAR..... delete cache.img & repack your firmware. now flash the repackaged firmware via ODIN.....thnx
wish u good luck :good:
Click to expand...
Click to collapse
Hey, thanks for your answer! However, when I try to install the root it just says Blocked by FRP lock. What do i do now?
1-Try to use Smart Switch Emergency Recovery.
if not then download full 4 files firmware and install that with odin...(i hope u know what i m talking about}
I've tried to flash combination file to my galaxy a40 with odin but it's giving me error ''re-partition operation failed''. I've tried with A405FNXXU3ATB1 and A405FNXXU3ATA1 files.
My firmware model number is A405FNXXU3BTG2. If someone could help me I would be so glad.
Vaddex said:
I've tried to flash combination file to my galaxy a40 with odin but it's giving me error ''re-partition operation failed''. I've tried with A405FNXXU3ATB1 and A405FNXXU3ATA1 files.
My firmware model number is A405FNXXU3BTG2. If someone could help me I would be so glad.
Click to expand...
Click to collapse
I just got into this recently and what I understood was that the combination file and the firmware should be identical. It is so hard to get matching files. Came here to ask if anyone could provide me. Don't no if it was any help.
Yeah I think that's true but I wasn't able to find any combination file that matches with that firmware. Maybe I just dump that phone because the time and effort it needs to get unlocked is way too much when mentioning what it's worth Just bought it from random romans and I didn't know about frp lock lol.
flashing combination ROM all newer Samsung devices will run into error "Please get the approval to use factory binary". you need to buy Etoken via Halabtech or bypass with similar service