Database Users

My way of getting a almost perfect Cyanogen Mod 6 on X10

Ok here it goes. What im trying to do here is share my experience and how i managed to get a almost fully working Cyanogen Mod rom on my x10, due to the fact that there was some mis understandings between the devs and development has some how decreased. It goes to show that working together could bring wonders to the X10. This setup is rock solid! Not one reboot in 3 days test, sd card works(sometimes you have to unmount in settings to install say angrybirds and others then mount again) but it works, camera works, video camera works(with illusion app on market), wifi fixed with blade wifi fix, smooth as butter, maps work, gps works etc!
Heres what i did!
First with recovery flash Zs beta 3, factory reset,cache wipe, boot. After it is settled flash Zs beta 3 hot fix 1 with recovery,reboot, flash Zs gapps zip 19xx., reeboot. When it boots set up everything, contacts, facebook, twitter, everything! All your accounts! When done boot into recovery and do a backup of the rom. Then with recovery flash Trips Cyanogen Rom V1, wipe data, cache and davlik cache, and reboot. When cyanogen is settled in, go to recovery and flash Zs gapps zip V1, reboot. Go to recovery again and flash Zs beta 3 hotfix 1 on Cyanogen, reboot. Go to recovery and on back up and restore,advanced and restore only data from Zs rom you made a backup of before, reboot. You may have to flash gapps zip again if market is missing, so do it, if not go to next step. Go into market and download illusion video cam app, and blade wifi fix. You should now have video recording with illusion app and wifi should be fixed! Hope this help some people to get an excellent rom on their device as this my daily driver with no issues so far and everything that should work does. I just hope the devs can come together as i know theyre capable of making wonders for our devices! Thanks to T, Z, J and all others in xda for making my device awesome! Thanks!
Sent from my MB502 using XDA App

Thanks for the info man!
Why don't you share a backup of that rom?
Thanks!

hm, ok, but mixing the 2 roms is way easier from the first method mentioned, and takes a lot less time, but i like the innovative thinking

I made my cyanogen rom too, and my works too. But i merged trip cyanogen 1.2 with zdzihu freex10 beta 4 and it worked like a charm. Even sdcard so no need for unmounting for installing angry birds. If someone need the zip tell me how i can share it. But u need the latest baseband .54 to use it.
Sorry for my English
And sorry that i used your thread.
Greetings neo
Sent from my xperia using XDA App

Hello.
Please, can you upload your BACKUP???
THX

I never shared files so some hints how would be nice and it's no backup it's a clean setup.
Greetings
Sent from my xperia using XDA App

sherman said:
Thanks for the info man!
Why don't you share a backup of that rom?
Thanks!
Click to expand...
Click to collapse
It would be great!

i will open a own thread for sharing the files when i finished the upload on mediafire.
greetings neo

The devs seem to be using mediafire so upload it there it should be fairly simple since you were able to find a roundabout way of merging them. Then link the dl site here. Might wanna check if its ok with the people you got it from though. Just respect ya know?
Sent from my X10i using XDA App

If i made a backup wouldnt all my info be on there?
Sent from my X10i-TripNRaVeR using XDA App

Someone correct if im wrong but couldnt you just share it less the data file? Or a fresh install then back up without all the data put in?
Sent from my X10i using XDA App

thread opened. don´t know how i can link it here but it´s called Stable freex10-beta4-Cyanogen ROM
greetings neo
ps: and yes your info will be in so don´t do it

With the development of the video camera, have you tried any of the QR scanners?
For example I use Barcode Scanner pretty often, is it the software of Barcode Scanner using the android drivers making it not work, or is there a way to get the barcode scanner running similarly to the 3rd party video camera app.
Thanks

[Q] CM7

Just installed "CyanogenMod-7 for ZTE Blade (Orange San Francisco) :: V7.0.0-RC4 (30/03/2011)"
Firstly, many thanks for making this great rom. Instructions very easy to follow, even I could do it (my first smart phone, only had it 5 days so yes, it’s all very new to me).
Anyway, can someone please help me? On my old Orange rom, when sending a text (which is what I do a lot of) my “send to many logo” is missing from the CM7 rom (see pics). How can I get this back? It's driving me nut!

Try Another SMS App Like GOSMS or Handcent SMS

Rebooting and Battery usage
My zte with CM7 seems to use alot more battery than the original ROM i had. anyone else?
It will also reboot when the battery is lower than 30%. anybody know why?

The current CM7 rom is faulty, don't flash it....i'm also waiting for a more stable one. This rom is not so reactive to accelerometer so if you play games such as doodlejump, it won't work so don't flash the rom, instead you can flash this froyo, it's quite fast as well ! FLB froyo R11

Gen2
Hi All
Just flashed my Blade to Gen 2 yesterday and installed CM7 Gen2 .
On previous CM7 Final Gen 1, I had reboots and freezing on boot screen but
have had no issues since the new installation. Plays games very well.
Stransky
(Douglas)
Edit: Just upgraded CM7 to 7.0.2 and on reboot phone was stuck on boot screen and had no arrow
to swipe nor would menu button work other than to put phone in standby. Had to uses stock recovery to get cm7 to load and now
cannot get beyond the the Droid screen when trying to restore/backup. Will not enter clockwork recovery no matter what I try.
Can load CM7 basic but no google apps and unable to load gapps because I cannot enter clockwork recovery. Can any suggest a way out.

Use rom manager to install the latest clockwork mod
Sent from my Blade using XDA Premium App

So what's best for now: staying Gen 1 with CM7 v7.0.0 or turning into Gen2 and get v7.0.2 ?

HCDR.Jacob said:
Use rom manager to install the latest clockwork mod
Sent from my Blade using XDA Premium App
Click to expand...
Click to collapse
HI
Thanks for the reply but I have tried to download the latest ClockworkMod via Rom Manager and the same thing happens it tries to update and then freezes
on the droid screen. I can't get to the market as I cannot load gapps because
of the lack of ClockworkMod recovery. Catch 22 time. Any other suggestions greatly received.
Stransky
(Douglas)

HCDR.Jacob said:
Use rom manager to install the latest clockwork mod
Sent from my Blade using XDA Premium App
Click to expand...
Click to collapse
Hi HCDR.Jacob
Me again. Have just found out why I cannot load ClockworkMod Recovery or any other recovery. Ran Androot 1.6 andgot reply, when I tried to unroot - Not Rooted.
So I ran Androot and got the following "Rooted - No - Fu - Goo". Yet Balde is running CM7 . Question is now how do I root the blooming thing or is that a no go?
Please advise.
Stransky
(Douglas)
Edit: Have found possible fault is corrupt firmware. I s there any way to flash the firmware on the Blade to original state and if so how?

Google for no fu goo m8, it's a very common response and can sometimes be solved.

Troute said:
Google for no fu goo m8, it's a very common response and can sometimes be solved.
Click to expand...
Click to collapse
Hi
Thanks for that but info garnered no where near to solving prob. Managed to find z4Root and ran that and it informs me I am still rooted. Problem is that I cannot access ClockworkMod Recovery and rom manager is stuck on 3.0.2.0 and will not upgrade to 4.2.0.0 which is the latest as far as I can ascertain. Do you know of any way to get ClockworkMod back onto my Blade so that I cam upgrade CM to 7.0.2 and get google apps back.
Stransky
(Douglas)

I just upgraded my ZTE Blade to 7.0.2 using the latest Rom Manager (from 7 RC3) ... now my Blade just keeps booting only showing the Droid Logo for about 4 secs and that loops forever. I wasn't aware of any Gen1 vs. Gen2 thing. And am still not sure what this exactly is.
Is there anyway to fix this, or is the device bricked?
Any ideas? Any help is VERY MUCH appreciated!
Thx.

max42 said:
I just upgraded my ZTE Blade to 7.0.2 using the latest Rom Manager (from 7 RC3) ... now my Blade just keeps booting only showing the Droid Logo for about 4 secs and that loops forever. I wasn't aware of any Gen1 vs. Gen2 thing. And am still not sure what this exactly is.
Is there anyway to fix this, or is the device bricked?
Any ideas? Any help is VERY MUCH appreciated!
Thx.
Click to expand...
Click to collapse
Just gave you a possible tweak on your thread but please don't just splash your problem onto the other threads, as this is most likely to create confusion. If somebody can help you, he will answer you in the right thread: the one you opened.
Also a first look at similar topic or a quick search would have avoided this kind of situation. Even the first guide for flashing a custom ROM on the OSF clearly states a warning on the Gen1/Gen2 thing...
http://www.orangesanfrancisco.co.uk...cratch-on-the-orange-san-francisco-zte-blade/

gloc33 said:
Just gave you a possible tweak on your thread but please don't just splash your problem onto the other threads, as this is most likely to create confusion. If somebody can help you, he will answer you in the right thread: the one you opened.
Click to expand...
Click to collapse
I wouldn't have cross-posted if the topic wasn't CM7. Maybe it stops someone to make the same mistake -> see below.
gloc33 said:
Also a first look at similar topic or a quick search would have avoided this kind of situation. Even the first guide for flashing a custom ROM on the OSF clearly states a warning on the Gen1/Gen2 thing...
Click to expand...
Click to collapse
Didn't know about the site and wasn't aware of the Gen1/Gen2 issue.
I wanted to show a friend (iPhone owner) how easy it is to update the firmware using ROM Manager over a beer and simple downloaded CM7.0.2 using ROM Manager, not being aware of any Gen1/Gen2 issues...
well EPIC FAIL!
So, thx for the url and won't be crossposting again.
Regards,
-Max

Can't imagine your friend's face facing your endlessly rebooting phone. Indeed pretty epic

I tried cm7 had gps reboots and then when clicked settings got black screen

I've installed this ROM (CM7.02Nightly57 + CWM 3.0.2.7) yesterday, but having some troubles:
- the battery is duying very fast
- the pulldown menu can not be pulled up easy in normal mode. When in landcape it works nice, but when in portrait, it is stuck in the bottom, and you can pull it up after several times, or have to press back button
anyone has issues like this?

Nesovic said:
I've installed this ROM (CM7.02Nightly57 + CWM 3.0.2.7) yesterday, but having some troubles:
- the battery is duying very fast
- the pulldown menu can not be pulled up easy in normal mode. When in landcape it works nice, but when in portrait, it is stuck in the bottom, and you can pull it up after several times, or have to press back button
anyone has issues like this?
Click to expand...
Click to collapse
Autonomy issues have already been widely reported for 7.0.2, most people I have read from went back on CM7.0 stable because of that.
For the menu, this might be a new issue. Perhaps check on CM7 forum to see if it has been reported yet and whether a fix has been found yet.

Latest/ best current Ginger Mod for A953?

Hi,
I've successfully modded my MS2 yesterday using (walter's?) "ms2ginger-rc2". It's been quite easy - I expected it to be much more difficult.
Unfortunately it's impossible to add accounts (app crashs). Therefore I plan to roll back to the sysbackup Imade before with Clockworkmod and to re-mod it with a newer/ better/ more stable variant.
Can you suggest one that you are happy with? I am fine with Blur - it can be included.
Anything to keep in mind for the rollback? Just revert to the backup via the bootloader?
CU,
Meszi.
Sent from my MotoA953 using XDA App

i have tried CM7 and was before using it on BackFlip, but on Milestone 2 i am really loving MIUI its great ROM.
The problem is as i saw no one who is maintaining these CM7 or MIUI rom is not Dev, so i kinda think Milestone 2 can perform better with some optimalisation for it. The reason is as far as Stock Froyo was slow, CM7 and MIUI did not show kinda speed progress or increase i guess it is performing same as stock ROM or maybe little but only little better, on BackFlip there was really dramatic speed change on CM7 but the dev around BF was more active then on Milestone and i am happy with what we have already.

As far as I know, the MIUI is the latest one. But that's just because endles7's ( the guy who is porting CM7 to M2) phone is bricked at the moment.
Both, CM7 and MIUI are great ROMs, but, at least for now, if you're looking for the newest one, then MIUI is the one for.
I believe that CM7 will be supported again soon, there is a movement on the forum to buy endles7 a new one if his is really bricked forever.
I'm using MIUI because o like the interface better.
Hope it helped =)

Upgraded to "ms2ginger 1.1" but still problems with accounts management
Hi,
I reverted to Froyo, reloaded the backup I had done with Clockworkmod, made an app backup using Titanium and re-modded the device to "ms2ginger 1.1". But still there is the same issue with accounts ("Konten" in German): When trying to add an account the app crashes.
I am fine with the rest ... it works far faster than with Froyo.
Is there a way to get accounts/"Konten" work again? Probably by finding it in the Titanium backup and taking the old app or by (re)installing some working .apk?
At the moment I am still very new to this topic ... until last week I still believed in the myth having bought an "unmoddable" device.
I'd try CM7, too ... but if it's possible to have it done with "ms2ginger" I'd at first prefer trying it that way.
Any suggestions?
CU,
Mészi.

after trying cm7, i really prefer MIUI Rom on A953 !
but Cyanogen team will soon release a 2.3.7 Rom ... so we'll see !

Switching from MS2Ginger to CM7 Nightly
Sorry, if it appears to be a dumb question. But at the moment I am still very new to this topic and want to avoid bricking the device by forgetting a thing when switching from "MS2Ginger 1.1" to some CM7 ROM...
When reading the installation steps of the nightly build (http://forum.xda-developers.com/showthread.php?t=1239778)...
*START copy&paste*
[How to Install]:
1. Download all in one update.zip
2. Make sure you have CWM3.x/4.x working. Or download from here.
3. select all in one.zip then apply update.
4. double wipe(if you are coming from previous CM7 version,just wipe cache/dalvik)
5. For CWM4.x, reboot and done.
For CWM3.x, download fixed-sbf and flash it. Then done.
*END copy&paste*
...it's not plain to me if I needed to switch back to the official Froyo or if "updating" with the all in one.zip and wiping the data would be sufficient to get rid of the previous "MS2Ginger". :-/
Any recommendations?
CU,
Mészi.

Do you try with "RSD Lite" software to put the stock Rom ?
and then you do the update to the custom rom ... no brick with this method i think ! but i'm not expert sorry !

buggsbeny said:
Do you try with "RSD Lite" software to put the stock Rom ?
and then you do the update to the custom rom ... no brick with this method i think ! but i'm not expert sorry !
Click to expand...
Click to collapse
That's the question.
If it's not necessary I'd directly load the CM7 ROM using CWM.
But, anyway: As long as I can access the boot loader (PowerOn + Cam + VolDown) I could still revert to the official Froyo if updating to CM7 directly would not work.
I think I just give it a try...
CU,
Mészi.

exactly ... i was afraid last friday while updating my stock rom for MIUI ... my battery goes out !
all day i was thinking that my lovely Milestone was bricked ... but with "rsd lite" i re-install my original froyo ... and then i could re-root it and put the miui version !
last version is perfect ! just the problem of keyboard layout but there is a script who put it back to azerty ...
have a good luck for your update !
++

So you would recommend downgrading to the official Froyo at first? *somewhat confused* :-/
Sent from my MB953 using XDA App

... i don't really know ... just said that for me that was the only way to rescue my bootlooping m2 !
normaly you can update from any rom, just don't forget to clear cache, "dalvik cache" too (don't remeber the name) ...
the best is to do a factory reset before rebooting too ... but it's not always necessary ... from miui 1.09.23 to miui 1.10.8 i don't have to do it ...
they don't talk about it in the related post of your rom ?

Ok, thx. I am gonna just try it wiping the cache and overwriting the ROM. ROM switching is not relly described in the MS2Ginger HowTos. *g*
Will post my results here...
Sent from my A953 using XDA App

Good luck !
Sent from my A953 using XDA App

Worked w/o any problems
Hi there,
I just "updated" my MS2 from "ms2ginger 1.1" to "EndlessCM7_20111001_Nightly_BPSW_v1_0" without any problems.
I can only recommend to check the thread: http://forum.xda-developers.com/showthread.php?t=1239778
Thanks for your replies so far.
CU,
Mészi.

happy to see that it worked !

Problems with CM/ Nightly
Hi there,
I am half-way about to throw it away again.
I installed EndlessCM7_20111001_Nightly_BPSW_v1_0.zip and then EndlessCM7_update_from_111001_to_111004_v1_5.zip and it appeared to work fine.
But I had to recognize an instable Market app, WiFi cannot connect to my access point and the camera app crashes reliably after starting it.
I will post this in http://forum.xda-developers.com/showthread.php?t=1239778 too hoping that these are known issues with known solutions on it.
If anyone of you knows I'd be glad if you threw some suggestions at me.
CU,
Mészi.

O well....
For me, MIUI is workind perfectlly, without any problems.
And, my battery life increased alot with the latest build of it
So i would recommend it.

meszi1977 said:
Hi there,
I am half-way about to throw it away again.
I installed EndlessCM7_20111001_Nightly_BPSW_v1_0.zip and then EndlessCM7_update_from_111001_to_111004_v1_5.zip and it appeared to work fine.
But I had to recognize an instable Market app, WiFi cannot connect to my access point and the camera app crashes reliably after starting it.
I will post this in http://forum.xda-developers.com/showthread.php?t=1239778 too hoping that these are known issues with known solutions on it.
If anyone of you knows I'd be glad if you threw some suggestions at me.
CU,
Mészi.
Click to expand...
Click to collapse
Update: I reverted to the stock ROM and installed the most recent version of EndlessCM7. Now it's working fine.
Details here: http://forum.xda-developers.com/showpost.php?p=18352563&postcount=1382
Thanks for all suggestions. Hopefully this thread will be useful though too for other noobs avoiding the mistakes I did.
CU,
Mészi.

Hi, Michael:
I'd like to have my MS2's battery improved like you said and enjoy Exchange server support as well . Do you know if MIUI rom supports it?

MIUI has Exchange server support and works fine.

[q&a] the best rom for your s4 i9500 kk4.4.2 thunder universe v6.0

Q&A for THE BEST ROM FOR YOUR S4 I9500 KK4.4.2 THUNDER UNIVERSE V6.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

can u guys update the rom
can u guys update the the rom to android 4.4.4 kitkat or update it to look like galaxys 5

zaifulkhan said:
can u guys update the the rom to android 4.4.4 kitkat or update it to look like galaxys 5
Click to expand...
Click to collapse
Mate 4.4.4 is not out yet!!! but I'll update it as soon it releases that!!

So how things are coming?
Sent from my GT-I9500 using Tapatalk

nice downloading
thanx
downloading now

Rom wonderful.

Download link not working!
KIndly share a new download link as the current one is not working.

Youtube and Playstore
My youtube app and playstore app is not working suddenly ...youtube app say no internet connect ..... HELP Please ?!?!?!???

battery
is it normal to only get 2-3 hours of screen on time on my i9500?
the battery is not swollen.

coupries said:
battery
is it normal to only get 2-3 hours of screen on time on my i9500?
the battery is not swollen.
Click to expand...
Click to collapse
yes

Lennyz1988 said:
yes
Click to expand...
Click to collapse
why i see some people can get until 6 hours? i only use wifi n vey light ussage. no gaming at all.

coupries said:
why i see some people can get until 6 hours? i only use wifi n vey light ussage. no gaming at all.
Click to expand...
Click to collapse
They are lying.

Cannot backup data
for the past week i've been trying to backup my rom using TWRP 2.7.0.0 it say failed then i update the TWRP to the latest one i think it was 2.8.0... And try to backup again and it say successful ...then it when i try to restore it and there was no data !!!!! PLS HELP..

Device - i9500
Modem - DDUFN1
I have been experiencing certain cellular data disconnections. Sometimes I dont receive whatsapp messages the moment they are sent. I receive them when i open whatsapp.
This doesnt happen all the time. and everything works perfectly fine when i am connected to WIFI.
What could be the cause? I experienced same problem with Thunder universe ROM i was using previously.
Do i need to try another modem?
Sent from my GT-I9500 using XDA Free mobile app

Modem issues
Device - i9500
Modem - DDUFN1
I have been experiencing certain cellular data disconnections. Sometimes I dont receive whatsapp messages the moment they are sent. I receive them when i open whatsapp.
This doesnt happen all the time. and everything works perfectly fine when i am connected to WIFI.
What could be the cause?
Do i need to try another modem?

Download links..
Can anyone give me a download links to v5.5, I cannot open the links provided.....please...

[Q&A] [ROM] CyanogenMod OFFICIAL NIGHTLIES - 5.0.2 - CM12 - D802

Q&A for [ROM] CyanogenMod OFFICIAL NIGHTLIES - 5.0.2 - CM12 - D802
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] CyanogenMod OFFICIAL NIGHTLIES - 5.0.2 - CM12 - D802. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Which is the best gapps package to use with this ROM?

sorry bad thread

Hey guys,
is it possible to restore apps via Titanium Backup?
I tried it with root access for "apps only" and "apps and ADB"
After that i flashed superSU via TWRP.
So that i could restore some apps. But e.g. not the xda App.
Sent from my LG-D802 using XDA Free mobile app

sph3re90 said:
Hey guys,
is it possible to restore apps via Titanium Backup?
I tried it with root access for "apps only" and "apps and ADB"
After that i flashed superSU via TWRP.
So that i could restore some apps. But e.g. not the xda App.
Sent from my LG-D802 using XDA Free mobile app
Click to expand...
Click to collapse
I think this depends on the app as there may be changes due to the different runtimes (dalvik on kk and art on lp)
Sent from my GT-N8010 using XDA Free mobile app

Krenol said:
I think this depends on the app as there may be changes due to the different runtimes (dalvik on kk and art on lp)
Sent from my GT-N8010 using XDA Free mobile app
Click to expand...
Click to collapse
I thought about it already but i had ART with Android 4.4(CM11)
Sent from my LG-D802 using XDA Free mobile app

Setup Wizard has stopped
Installed this and went to cyanogen boot animation after reboot for a couple of minutes. I was thinking that i got boot loop but then the animation stopped and showed "Unfortunately, Setup Wizard has stopped." . Any idea on how to fix this ?

Rookie here, had a few problems installing Cloudy G3 on my D802 with the system wipe ridding the ROM's and Gapps. Can't even remember how I got around that.
Could someone please enlighten me as to the correct way to flash CM without the above problem happening?
Please and thank you

calvin22580 said:
Rookie here, had a few problems installing Cloudy G3 on my D802 with the system wipe ridding the ROM's and Gapps. Can't even remember how I got around that.
Could someone please enlighten me as to the correct way to flash CM without the above problem happening?
Please and thank you
Click to expand...
Click to collapse
Are you trying to install CloudyG3 or CM12 ?

Rizqibe said:
Are you trying to install CloudyG3 or CM12 ?
Click to expand...
Click to collapse
CM12 But without a micro SD card, I have to put the ROM on the phones memory and doing a system wipe before install rids the ROM image.

modem
Hello my name is Francesco, the modem is kitkat? Thank you!

I tried zoiper cpsimple and both doesn't work.
Voice is mute o bad.
have you same problem?
About profiles
I set profiles when disconnet from my WiFi to change vibrate ring but noto changes?confirm?
Inviato dal mio LG-D802 con Tapatalk 4

Rizqibe said:
Installed this and went to cyanogen boot animation after reboot for a couple of minutes. I was thinking that i got boot loop but then the animation stopped and showed "Unfortunately, Setup Wizard has stopped." . Any idea on how to fix this ?
Click to expand...
Click to collapse
Factory reset and reboot... Should be fixed
che78 said:
Hello my name is Francesco, the modem is kitkat? Thank you!
Click to expand...
Click to collapse
Yes stock kitkat

maydayind said:
Factory reset and reboot... Should be fixed
Yes stock kitkat
Click to expand...
Click to collapse
Thank you, i've tried it 5 times and worked properly.

Some questions
Hello, I'd like to know if everything is working, like NFC and infrared, and if is possible to use third party apps to do the LG apps job (like QuickRemote).
Another thing, the camera quality is very decreased or it doesn't make that difference, cause I know that almost everytime we lose camera quality when changing to ROMs that aren't stock.
And a personal question: what do you miss the most that cm12 doesn't have and LG has, and what do you like most that cm12 has and LG doesn't.
Thanks (and sorry for any mistakes with english).

gmfylyk said:
Hello, I'd like to know if everything is working, like NFC and infrared, and if is possible to use third party apps to do the LG apps job (like QuickRemote).
Click to expand...
Click to collapse
Didn't try that on CM12, but on CM11 infrared was working and you can find the quickremote apk in the forum.
gmfylyk said:
The camera quality is very decreased or it doesn't make that difference, cause I know that almost everytime we lose camera quality when changing to ROMs that aren't stock.
Click to expand...
Click to collapse
The quality seems okay for me, like on CM11 or stock.
gmfylyk said:
What do you miss the most that cm12 doesn't have and LG has, and what do you like most that cm12 has and LG doesn't.
Click to expand...
Click to collapse
What LG has:
The remote controll in the status bar.
The immediate screenshot editor
What CM12 has:
Long press Vol up/down to skip track (on stock I had to use another app for double tap)
No LG Apps I don't need
it's faster
Normal design

Thank you, it already helped me. Indeed the design of LG's lollipop is the main reason that I wanted to change to cm12. They simply turn lollipop into a stylized KitKat, and I didn't liked.

Hey Calvin,
Try a USB OTG (Double-ended USB stick with micro USB at one end, or just a USB to micro USB adapter cable). You can store the files to flash on it (CM12, Gapps...), and use it from recovery. If you don't already have one, there are plenty of cheap options online.
Dave

Is there a way to force mobile data to only 3g instead of 2g/3g? I remember switching from 3g preferred to 3g only from *#*#4636#*#* at cm11. Is there something similar for cm12?
Edit: oops its still there, silly me.

Is viper4android working in this ROM?