Hello.
There is a problem with call log. When connection is established instead of a name of subscriber it is specified ID unsent. So sometimes it works correctly with subscriber name, sometimes not even if i call the same subscriber.
confused
what is this pertaining too? I can help you get this fixed if you give me more information
What do u mean? Like this
Related
Hi!
I am using a feature of my telephone company which is called "parallel call". There i can have a call that is ringing on my home phone, ring on another number i can specify at the same time. Whoever picks up first, gets the call.
I know that my old Siemens S55 could at least show me, thet the call reaching my cell was a redirected one.
How can i get my Neo to show me, that a call is redirected or even better show me the phone number it originally intended to reach.
Any help is appreciated.
Thanks
Falk
My provider, Fido, offers a service where the name of the caller and telephone number show up. It's called name display. Unfortunately, on the hermes, the name does not show up. I only get the telephone number.
I have used another phone with this service and the service works.
I have been through several roms and they all give the same result. Any clues to what could be going on?
bump bump77
I never knew there was this funtionality from the provider......
Always thought there was a conversion on the phone when there comes a call in. Number recognition is we'll known, name send with the provider I have never heard off.....
Hope someone has an answer for you!
http://www.fido.ca/portal/en/support/namedisplay.shtml#q01
"What is Name Display?
It's a unique service exclusively offered by Fido and Rogers that lets you see on your handset display a caller's NAME and phone number from Fido, Rogers Wireless and landline callers across the nation, even if it isn't entered in your phone book. So you'll always know who's calling you. "
dying to find a solution
I have Hermes from Rogers. I have name display and of course stop working after upgrading to WM6.
just to prevent duplication, please read what I've done so far at the following link:
http://forum.xda-developers.com/showpost.php?p=3078617&postcount=9
I don't have enought info or experience. Can anybody help? Work together or direction whatever...
This cannot be impossible. I don't think HTC developed a driver only for Rogers.
Hey guys,
Just wondering if this could be X1 related or service provider issue. When any of my contacts call me even if I have their number stored and they have caller ID active, my X1 says "unknown" incoming call instead of their name/number.
I don’t have a spare phone to try my sim in it to eliminate whether it could be provider related. I have also installed the HTC touch dialler and still says unknown caller.
Any advice appreciated
Thanks guys!
No such problem at all. Might well be you do not have the Caller ID service on this line?
joej said:
No such problem at all. Might well be you do not have the Caller ID service on this line?
Click to expand...
Click to collapse
Yep, i just spoke with my provider and the service was not active. All it took was 30 mins on hold
Thanks
My SX66 is running WM6.1 ROM from sun_dream.
Every are smooth except one problem:
When I set the Caller ID service to "no one", I can not make any call.
I do not know why. I test my SIM with another phone, calling works normally. So I guess the problem is on the ROM.
I did search the forum but did not find a clue.
Any suggestion/solution are really appreciated.
Thanks,
it is possible that the network setting for caller id varys from country to country but for germany for instance the code is 31.
for getting the status dial *#31#
for temporary sending of your callerid dial *31#
to disable callerif dial #31#
and to get the status of incoming id dial *#30#
either that works for you or you look up the codes for your country and/or carrier and try them, that way, you can tell whether really the setting is broken in the rom or just not compatible to your network and adjust it.
Thank you for quick reply.
My network uses code #31#, and I tried it but could not make the call. The same with setting "No one"
I guest that the problem is with the ROM.
have you tried upgrading your radio rom? the newest one is 1.15.00 and maybe that will do the trick. or you sim unlock your device, or you try another sim card in your device. you know, the possibilities for what went wrong are pretty limitted, but i actually would blame the rom last, since that really hardly affects the calling.
Hi there,
I have a problem. 2 days ago i put android on my HD2 and it worked perfectly but now i can't recieve calls or make any calls. If i want to make a call he put auto. 011 in the phone number and than it says 'services is not available' but i can text the person but not call them. When i boot my windows mobile os i can make calls and recieve so thats strange. My radio version is 2.0.12 and i put the newest android os on my phone.
Slagers said:
Hi there,
I have a problem. 2 days ago i put android on my HD2 and it worked perfectly but now i can't recieve calls or make any calls. If i want to make a call he put auto. 011 in the phone number and than it says 'services is not available' but i can text the person but not call them. When i boot my windows mobile os i can make calls and recieve so thats strange. My radio version is 2.0.12 and i put the newest android os on my phone.
Click to expand...
Click to collapse
when you try to call someone , the device automatically adds 011 to the # ?
It's a setting you can enable/disable in the settings. I'm sorry I cant advise you ATM as
I'm not running android,I'm using WinMo, But i remember that it was " Add Country code or prefix to Numbers " or something like this, just disable it .
But others should be able to call you normally, as their phones doesn't add prefix.
Hope others can help you
Hi kawazaki,
Thanks for the response, but if other people call me they here the dailing note. But my phone isnt responding on that so i can't see that some1 is calling me. And if i boot in WinMo i can recieve calls and make calls (strange)?
Some1 help me
*Maybe i found something but i can;t change it (AAAH) Maybe you guys can help. I found some call settings named:
Call barring settings Then i see All outgoing (Disabled) All incoming (Disabled) than i want to change it in enable but i requires a password :S
Please help im desperate
samething just happened to both me and my friend's hd2s on android,,he told me all he did was take out the battery and as soon as the phone boots,,make a call,,i tried it in mine nd chi ching,,works!