Friends, Pls help me my YU Yureka is not registering Bluetooth headset connection. It connected but disconnecting automatically immediate after TEN seconds. I tried with my two Bluetooth headset (Platronics ML10 & Nokia 210). Both are in good condition and using with my htc win phone and spice tablet wit out any defects but YU has the issue. Both are paired, can hear connected beep in headset but connection loss with TEN seconds.
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
For more questions or to have full access please register an account on XDA forum.
Stand by
Good luck
Still waiting
R_a_z_v_a_n said:
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
For more questions or to have full access please register an account on XDA forum.
Stand by
Good luck
Click to expand...
Click to collapse
http://cdn4.xda-developers.com/images/icons/icon6.gif
I am using Plantronics ML2 headset. Its connecting perfectly
My ML10 is not registerimg. connected.
Chenrichy Shankar said:
I am using Plantronics ML2 headset. Its connecting perfectly
Click to expand...
Click to collapse
Dear Mr. Shankar. My Platronics ML-10 and Nokia 210. Both are connecting but before register it disconnected @10th seconds. Did all the ways. Your YU version ? Mine is last updated 11.0- XNPH05Q. Your BT ver.2 ?
Am also facing the same problem as OP, while connecting my nokia BH 104 bluetooth, please someone come out with a solution
Yu YUreka Bluetooth and Earphone Jack Problem
Friends ,
I am facing the problem with Yureka Bluetooth connectivity and earphone jack. my Yureka is not registering Bluetooth headset connection. It connected but disconnecting automatically immediate after few seconds. i have tried registering with couple of blue tooth headset which are already working in my Samsung Grand and Micromax A92.
for the earphone jack / cable , it doesnt work after it is unplugged once. it will only work after phone has been restarted.
3rd and last , the phone has a big heating issue if it is used for longer conference calls etc.. (more than 20 mins etc..)
YU Yureka disconnects Bluetooth headset. No resolution even after two months
YU Yureka disconnects Bluetooth headset. It connected but disconnecting automatically immediate after TEN seconds. YU has the issue. Both are paired, can hear all the sound after connected but disconnects with TEN seconds.
Other are not able to listen my voice via Samsung Bluetooth headphone
Hi,
I am using Samsung Bluetooth mh1000 headphone. It is connecting fine even I can listen music very well with my YU yureka. When I am on the call I can listen other's voice but others can not listen my voice.
Seems something is wrong with my YU yureka. Because at the same time my Samsung Bluetooth headphone mh1000 is working fine with other Samsung phones.
That means either yureka doesn't supporting headphone or headphone doesn't supporting other handsets.
Any help will be appreciated...
Thanks in advance..
Pranav
Can't connect Bluetooth is their any solution plz reply
Related
I am not having much luck with my new headset.
First time I bond the headset it works fine, but once bluetooth tools shuts down the bluetooth after a call, the headset it never gets it back correct.
The headset will still link and the call button will take the call, but I can't communicate.
After you have taken a call on the headset, is there a way of getting the call back onto the xda?
I even tried leaving the bluetooth on all the time but that wasn't that successful either.
Anyone else using the logitech can they please advise me how they manage it's use.
Thanks.
I have been using logitech BT headphones love the unit. I dont have any problems except for the delay for it to connect to the phones. I have to wait for about 2 seconds before its connected to the phones when receiving calls. BTW I have been using it for the past 6 months. 8)
Do you use Bluetooth tools or just the stock standard bluetooth support?
Thanks.
Hi guys,
can somebody please help me with the following problem?
Out of nothing my T-Mobile MDA Vario stopped giving sound with out the headset connected. without any reason and the out of nothing it stops giving sound without the headset connected. this all happends after i installed tornado (a2dp) to get sound to my bluetooth headset. anyone knows whats gone wrong, i search the forums here but couldnt get no clear answers
I had a similar problem. No sound from the speakers at all, but through the headset it was fine. As if the speaker itself was dead. But it wasn't caused by any Bluetooth fault.
Effectively, the phone hadn't realised that the headset had been unplugged. To solve it I was told to rapidly pummel the headset jack with the headset plug. Somehow, after some time, the phone is jogged back into a working state.
then whats the point havina bluetooth headset if u have to carry ur handsfree to get ur fone ringing again normally aint there any better solutions to this
hi all,
is there a programme that would keep the BT link alive?
the problem is that my BT headset connection drops after a while and i have to repair the set. the headset is virtually unusable due to this....especially during driving.
i have checked the headset elsewhere and it works perfectly. tested it with Nokia 6600, Htc prophet, samsung mobiles.
thanx
And i thought I was the only one with this issue
When i have my phone linked to my BT carkit after a call ended a) i cannot receive any other calls or b)
the BT connection is interrupted...
really annoying
I did start with an application that will disconnect the BT after a call has ended and re-initilize it
would this work for you?
Mr_Gee said:
I did start with an application that will disconnect the BT after a call has ended and re-initilize it
would this work for you?
Click to expand...
Click to collapse
if it works for you, it would probably work for me
pls point me to it
thanx
hc4 inbox
junooni said:
hi all,
is there a programme that would keep the BT link alive?
the problem is that my BT headset connection drops after a while and i have to repair the set. the headset is virtually unusable due to this....especially during driving.
i have checked the headset elsewhere and it works perfectly. tested it with Nokia 6600, Htc prophet, samsung mobiles.
thanx
Click to expand...
Click to collapse
Yes it can be done via this small application that I've attached to my reply, basically what it does is it lets configure which folder to receive all files received via bluetooth on you storage card or phone memory as you please and it gives extra infoon bluetooth transfers like ETA and transfer rate and "IT KEEPS BLUETOOTH ALIVE at all times" so you can receive bluetooth files even when your device is not active.
You can find the original post here: http://forum.xda-developers.com/showthread.php?t=407291&highlight=hc4_inbox
Hey, is anyone using the bluetooth headset Jabra BT8040, When I first bought the headset, I had no problems using it. But I've noticed a few months ago, that whenever I use the device, the person I'm calling wont be able to hear me but I can hear them. Anyone have any ideas to solve this problem?
Similar problems
I've got the same earpiece and I've had some problems with it, including: unable to pair (or saying it's paired when it really isn't), unable to connect the BT on a call, and sometimes the earpiece will just disconnect from the phone (but the call will still remain active).
That last one is the closest I've come to your issue. I usually have to put the phone in discovery mode (and the earpiece) and try repairing them from scratch.
I've heard from others with this earpiece that they haven't had problems, but I don't know anyone who has this earpiece and the Raphael. Also, I've got the Motorola S9 bt headphones and I haven't had any problems with them. So, I'm not 100% it's the earpiece but then again it could be.
i have this jabra for about 6 months and had no problem at all with Raphael!
Changed ROM
I've just changed the ROM on my phone (as in signature line) so that may change things for me with the Jabra BT.
BPB21 said:
I've just changed the ROM...
Click to expand...
Click to collapse
Please post your results with your new ROM...David.
Updated ROM & BT
Black C5 said:
Please post your results with your new ROM...David.
Click to expand...
Click to collapse
I'm using the updated ROM and radio in my signature line with the Jabra BT8060 (wasn't it? whatever the one we were talking about in this post is) as well as a Motorola S9 and I pair it with my laptop for internet access that way. So far I have not had the same troubles with the Jabra BT as I used to. It could be due to updated drivers for the BT or the fact that I'm not using TF3D (just the new WM6.5 interface).
Either way, I'm having good results so far.
I spoke too soon on BT...
I've spoken too soon on BT. I was trying to get my Motorola S9 working so I could listen to music from my phone. No luck at all - it shows the S9 connected for both the calls and the the music, but it only works on calls and the music plays on the device with the speaker. And it was working just fine this morning. Bluetooth in general is so frustrating to me that I would literally remove it from every costom ROM I use EXCEPT for "Internet Sharing" (on an Acer laptop and netbook) over bluetooth and activesync with a PC. Not just with this phone, but seriously, with BT 2.0 it should work A LOT BETTER than it does.
I have similar issues with several different Moto H700's. I can hear them but they can not hear me. Possibly the BT drivers from HTC need a fix????
Hello everyone ant thanks for showing interest.
I have a i9505 Samsung Galaxy S4 (jfltexx) using Lineage OS 14.1 installed with twrp.
The problem is, when I make or answer a call from my Bluetooth headset (or in the car, it's the same thing) the sound drops and I cant hear anything, and the people I'm talking to cant hear me.
After I disconnect the headset, the problem persists and I need to reboot to hear the call.
The problem is persisting on every custom ROM I installed today. The only way to make it work is to flash the original firmware but I don't want it.
Hope you understand as English is not my native language.
Thanks for reading!
Anyone?
Same problem here. Phone calls wo blutooth work perfectly, but after connecting the bluetooth audio ppl cant hear me. After disconnecting the bluetooth device the mic still doesnt work. Reboot fixes this until i would connect bluetooth audio again.
"hands free" in bluetooth
Hello everyone.
I am having the same problem with the "hands free" in bluetooth. Does not work. Just noise.
Thank you. Great work