hi
i opening a thread here just incase someone have other solution ( already posted in Zenfone thread)
well
my phone not exactly brick. it still can be use. but i cant flash updates because i cannot enter recovery.
bootloader mode , yes i can enter ( the usb logo) but i still cannot flash any thing. the asus flashtool can discover the device but when trying to flash, it says cannot find the device. tried all method to enter the mode but still unsucessful. i belive the recovery image is accidentally deleted.
hopefully someone have other solution that i can adopt for my Z6
TIA
Related
Hello,
I own a Huawei P8 L09, bootloader unlocked, rooted and with TWRP recovery.
I tried this morning to flash a new rom using TWRP recovery.
Problem is that I do believe I wiped to many partitions and I ended up with a bootloop.
I could at first access 3 times the emui erecovery (btw, Wifi recovery failed) but not anymore (is it related to the battery level ? I don't know how much I still have)
Following a lot of threads here and on some other forums (I've been searching now for approx. 7 hours...) :
I downloaded a update stock ROM (B170 something), I extracted Boot, System, Recovery and Cust
I entered bootloader mode (it's the only mode I can go to; recovery No, Download mode neither)
and on my computer I typed in the cmd "fastboot flash recovery recovery.img" same with system, cust and boot.
All of them said "Okay" but the bootloop is still there and I can't acess any other mode or shut the device off.
Also, my bootloader indicate that i'm "unlocked" but when I try to do something as :
"fastboot erase cache" it says "remote: not allowed" or something like that.
I tried the SD card flash method but I can't even acess the 3-button mode (doesn't work - bootloop again).
Finally, I've got 2 questions :
1) Is there a solution ? Is there/was there anybody in the same situation ?
2) Does the battery level influence wether I may or not enter any mode ? like b.e. under 30% I can't access recovery or something like that ?
Thanks in advance for your help and sorry for my bad english.
Greetings from Belgium !
Jules
Hi!
I have the same situation as you do, All i know is that you can access the eRecovery only if you're plugged in.
But it's completely useless. Have you found any solutions yet?
Edit:
i struggled and i'm still struggling but i figured out that I need the recovery and boot img of the version i was on previously. In my case that is B350.
The main mirror is down but i managed to find another one: https://mega.nz/#!NAcgQY7Y!I4eRfkaq62J31csv_wZ8_nTzmUbWPX71JUicDysjus8
after flashing them i was able to partially flash (using vol+-&pwr) B170 (it only went up to 90% with my USB attached, fails without USB)
At my surprise it booted B170 even if it didn't complete, however right now it keeps rebooting every minute. I'll update if i manage to fix this
I have the same problem as you both. To flash boot.img and other files by fastboot we need to unlock bootloader. To unlock bootloader we need to have Imei, Product Id and SN, but I can't read it because phone won't turn on.
Anyone know how to get this info?
you can read these info from the packaging box!
I managed to fix my issues (i believe) by continuously flashing and flashing versions. I never really managed to fully OTA update to 100% due to some "CUST error" but from B350 i managed to "update" to B170, then to B200, then to B321a.
Now i just installed TWRP and rooted it and on the process of installing xposed (if possible).
I wasted a good 6-7 hours on everything already
Well now I actually sent my phone in repair, given that it still was under warranty.
If they return it unrepeared, i will try it your way, Nikooo777. Thanks.
TukAliveFra said:
Well now I actually sent my phone in repair, given that it still was under warranty.
If they return it unrepeared, i will try it your way, Nikooo777. Thanks.
Click to expand...
Click to collapse
you gonna pay for the repair..
Hello,
Ok, here is the situation
I have a Zuk Z1 with last COS update 12.1 with locked bootloader, no root etc ... (I didn't touch anything).
Yesterday, it reboot by itself but I got bootloop (starting apps then again lenovo boot image ...)
I try to factory reset by using the recovery metohd, it's start normally (optimizing apps ...) but then reboot and again bootloop ...
So I try to sideload the official COS ROM from Cyanogen Support (cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip), but the sideload stuck at 47% and saying total xfer: 1.00x and the phone go back to recovery but still have boot loop ...
I try to boot in fastboot and use the All In One tool to flash official ROM but didn't work (Its say that the bootloader is lock)
I find without knowing this menu a debugging hardware tool test, and then I run the test, its say SD : Fail and in another I got SD : Fail and no sd fuse in dir
I saw many thread here and on google, and some say that we have to use qfil/qpst method, and find this which seems complete : http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
But as I don't know if its hardware issue or soft brick ...
Could someone help me to recover my phone to COS or CM by using the right method ?
Thank you !
wackou said:
Hello,
Ok, here is the situation
I have a Zuk Z1 with last COS update 12.1 with locked bootloader, no root etc ... (I didn't touch anything).
Yesterday, it reboot by itself but I got bootloop (starting apps then again lenovo boot image ...)
I try to factory reset by using the recovery metohd, it's start normally (optimizing apps ...) but then reboot and again bootloop ...
So I try to sideload the official COS ROM from Cyanogen Support (cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip), but the sideload stuck at 47% and saying total xfer: 1.00x and the phone go back to recovery but still have boot loop ...
I try to boot in fastboot and use the All In One tool to flash official ROM but didn't work (Its say that the bootloader is lock)
I find without knowing this menu a debugging hardware tool test, and then I run the test, its say SD : Fail and in another I got SD : Fail and no sd fuse in dir
I saw many thread here and on google, and some say that we have to use qfil/qpst method, and find this which seems complete : http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
But as I don't know if its hardware issue or soft brick ...
Could someone help me to recover my phone to COS or CM by using the right method ?
Thank you !
Click to expand...
Click to collapse
Go with qpst/qfil method to recover your phone
And did you tried changing the USB port or cable while side loading cos ROM .. Cause most of issues are solved by the changing USB port or cable.. So try this.. Or else qfil is the option
shubhambhise said:
Go with qpst/qfil method to recover your phone
And did you tried changing the USB port or cable while side loading cos ROM .. Cause most of issues are solved by the changing USB port or cable.. So try this.. Or else qfil is the option
Click to expand...
Click to collapse
Hello,
I got help on the telegram group, we try many thing, the result is that I can only get ZUI working, if flashing COS via QFIL, I get the same result, if I flash ZUI, unlock bootloader, flash TWRP, wipe everything, then sideload CM13, TWRP say that no os is installed and I get a bootloop at the bootloader ...
ZUI is good, but I get some error regarding notification.
If you have any other idea ?
wackou said:
Hello,
Ok, here is the situation
I have a Zuk Z1 with last COS update 12.1 with locked bootloader, no root etc ... (I didn't touch anything).
Yesterday, it reboot by itself but I got bootloop (starting apps then again lenovo boot image ...)
I try to factory reset by using the recovery metohd, it's start normally (optimizing apps ...) but then reboot and again bootloop ...
So I try to sideload the official COS ROM from Cyanogen Support (cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip), but the sideload stuck at 47% and saying total xfer: 1.00x and the phone go back to recovery but still have boot loop ...
I try to boot in fastboot and use the All In One tool to flash official ROM but didn't work (Its say that the bootloader is lock)
I find without knowing this menu a debugging hardware tool test, and then I run the test, its say SD : Fail and in another I got SD : Fail and no sd fuse in dir
I saw many thread here and on google, and some say that we have to use qfil/qpst method, and find this which seems complete : http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
But as I don't know if its hardware issue or soft brick ...
Could someone help me to recover my phone to COS or CM by using the right method ?
Thank you !
Click to expand...
Click to collapse
Hope this will help you
Check this out
http://forum.xda-developers.com/zuk-z1/help/helpppp-t3505990
http://forum.xda-developers.com/zuk-z1/general/guide-how-to-unlock-root-install-twrp-t3394037
This will help you
Hi all.
I was having fun with my new BLU Vivo 5R and did a mistake flashing the wrong recovery. After booting the phone got stuck in bootloop. This is normal, happened with almost every phone. But the trick here is: I cant get to recovery or bootloader!!
The Power + plus/minus Volume keys doesnt work!! (or recovery and bootloader are both broken).
I have read more than 1000 of threads and couldnt find somebody with the same issue fixed.
Basically the phone boots and it shows the "BLU Bold like us" whit screen and boots again...
Any help or link to anything that can make my almost new phone boot to fastboot or something else? I'm willing to open the phone also, but I dont think its gonna help ...
Thanks in advance.
Hi there,
I will move your thread in the correct forum dedicated to Blu Vivo 5R Q&A for more relevant answers.
Good luck
hernol said:
Hi all.
I was having fun with my new BLU Vivo 5R and did a mistake flashing the wrong recovery. After booting the phone got stuck in bootloop. This is normal, happened with almost every phone. But the trick here is: I cant get to recovery or bootloader!!
The Power + plus/minus Volume keys doesnt work!! (or recovery and bootloader are both broken).
I have read more than 1000 of threads and couldnt find somebody with the same issue fixed.
Basically the phone boots and it shows the "BLU Bold like us" whit screen and boots again...
Any help or link to anything that can make my almost new phone boot to fastboot or something else? I'm willing to open the phone also, but I dont think its gonna help ...
Thanks in advance.
Click to expand...
Click to collapse
Hi,
you need to download stock Rom from here https://forum.xda-developers.com/vivo-5r/how-to/blu-vivo-5r-stock-roms-bluv0090eev11-t3492756
Unzip the folder and flash only recovery and bootloader to your phone using SP flash tool (learn how to use SPflash tool before flashing). If it won't help flash full stock rom, but this step will wipe all your data.
After that if you want to flash custom recovery or root your phone follow step by step this tutorial https://forum.xda-developers.com/vivo-5r/how-to/how-to-root-blu-vivo-5r-t3492718
Good luck:good:
use SP flash
Use SP flash. Download ROM from needrom.com. use download only . Mtk Roms are hard to brick. With SP flash Everytime ROM peer cycles SP flash with start download. U can fix problem with SP flash.
hi everybody, unfortunately my meizu m2 note is probably dead, and i dont know why i was try to install cm, i unlocked the bootloader successfully, and the i proceed to install the twrp. and here come the problem. i was using flash tool, i select recovery, but then an error (if i remember well it was this "brom error s_dl_get_dram_setting_fail") and then nothing else worked, phone doesnt boot up, but i think pc still recognize it, because it make a sound when i connect it. What can i do to revive it? pls help :crying::crying:
you failed to unlock bootloader
you should visit this thread you will find how to unbrick it UNBRICK A PAPERWEIGHT
HERE
same problem. any solution? my computer can detect the phone but the sp flash tools cannot.
Hi
Please i need help
I want to unlock bootloader and flash TWRP & Magisk on my realme 2 pro 4/64, after i flash all items, my phone was bootlop
Then i tried to relock bootloader, after that, my phone cannot boot and only showed this message.
"the current image(boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it"
how can i fix it?
note : i attached images of the problem, thats not my pictures, i save from the pther person who have the same problem. but i can find the best solution
thank you very much
flash stock recovery through fastboot. Then again install twrp custom recovery through fastboot. Then install stock zip rom by flashing through twrp. You can get stock recovery and stock rom from the following link.
https://forum.xda-developers.com/realme-3-pro/how-to/guide-to-stock-rom-stock-recovery-t3940604
fix
kisutbener said:
Hi
Please i need help
I want to unlock bootloader and flash TWRP & Magisk on my realme 2 pro 4/64, after i flash all items, my phone was bootlop
Then i tried to relock bootloader, after that, my phone cannot boot and only showed this message.
"the current image(boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it"
how can i fix it?
note : i attached images of the problem, thats not my pictures, i save from the pther person who have the same problem. but i can find the best solution
thank you very much
Click to expand...
Click to collapse
have you fixed?how
Bootloop please help asap!!
I was trying to install custom rom but I didn't took back up and wiped every thing on internal memory and also flashed stock recovery of realme 2 pro LOCKED the bootloader also I was hoping that I would be able to install stock rom by realme . But now am stuck at bootloop only realme logo appers
Basically I only have stock recovery on my phone and nothing else in the internal no OS installed bootloader is also locked so am not able to install twrp recovery to please help me install any rom .I am stucked due to lockdown no Service center is open. Please help asap??? I can't leave without my phone in this lockdown
davsagar4 said:
I was trying to install custom rom but I didn't took back up and wiped every thing on internal memory and also flashed stock recovery of realme 2 pro LOCKED the bootloader also I was hoping that I would be able to install stock rom by realme . But now am stuck at bootloop only realme logo appers
Basically I only have stock recovery on my phone and nothing else in the internal no OS installed bootloader is also locked so am not able to install twrp recovery to please help me install any rom .I am stucked due to lockdown no Service center is open. Please help asap I can't leave without my phone in this lockdown
Click to expand...
Click to collapse
Possible 100% solution, but it's paid.(800 inr)
In my case I'm fully locked (by vol down and power,vol up and power,both up down and power) i only see error..(no fastboot windows)
So to overcome this you need to pay someone some money (i paid 800,for oppo special I'd and password for 1 time),and download a compatible firmware (rom) and msm download tool in pc make sure you also have team viewer, as damn oppo won't allow you to flash firmware for free ad there is no crack for msmtool...hope this helps.. i also did this process during lockdown and learned a moral:-never relock bootloader
Qfil and other processes doesn't worked for me?
Don't wast time in crackes etc there is no official crack of realme 2 pro firmware bcoz there is always a different tool for each rom???..
I waited to fix this for 27 days.
davsagar4 said:
I was trying to install custom rom but I didn't took back up and wiped every thing on internal memory and also flashed stock recovery of realme 2 pro LOCKED the bootloader also I was hoping that I would be able to install stock rom by realme . But now am stuck at bootloop only realme logo appers
Basically I only have stock recovery on my phone and nothing else in the internal no OS installed bootloader is also locked so am not able to install twrp recovery to please help me install any rom .I am stucked due to lockdown no Service center is open. Please help asap
Click to expand...
Click to collapse
He_man_r35 said:
Possible 100% solution, but it's paid.(800 inr)
In my case I'm fully locked (by vol down and power,vol up and power,both up down and power) i only see error..(no fastboot windows)
So to overcome this you need to pay someone some money (i paid 800,for oppo special I'd and password for 1 time),and download a compatible firmware (rom) and msm download tool in pc make sure you also have team viewer, as damn oppo won't allow you to flash firmware for free ad there is no crack for msmtool...hope this helps.. i also did this process during lockdown and learned a moral:-never relock bootloader
Qfil and other processes doesn't worked for me?
Don't wast time in crackes etc there is no official crack of realme 2 pro firmware bcoz there is always a different tool for each rom???..
I waited to fix this for 27 days.
Click to expand...
Click to collapse
hey can you provide me that person's contact info?