First Update released By Cyanogen Mod for Yureka (Fix for Proximity, Dual SIm etc) - YU Yureka Q&A, Help & Troubleshooting

The update contains proximity fixes and dual sim fixes.
Update is about :73 MB
Thanks If I helped!!

First Update Works !
:fingers-crossed: Proximity Sensor & Dual SIM functionality Update OTA Released. (Official)
Go to Settings-about phone -check update-if its not showing any update info then Google webtricks update yureka and update my following the description on that website manually i updated myself and its working 100%.

No OTA yet? Update Manually!

yu update fixes
what are changes/fixes made in this upgrade to yu yureka.....
i want to know it before upgrading because iam not having any issues wit m yu yureka now

Couldn't install this update as my phone is rooted....can anybody plz tell how to flash stock recovery??

kmatta said:
Couldn't install this update as my phone is rooted....can anybody plz tell how to flash stock recovery??
Click to expand...
Click to collapse
Just flash it on rooted phone. Mine was rooted as well with twrp recovery. I just downloaded the ota update file and flashed it from recovery.
Flashed super su over it.
Wiped cache and dalvik
That's it. No problem.
It will take some time to reboot so don't worry.

Degradation of AnTuTu Scores after Update
My AnTuTu score before applying Update was about 31000 and after Update it is about 21000.
Anybody else noticed it?

http://builds.cyngn.com/fota/incremental/tomato/cm-tomato-efbb5514a1-to-9828f8e9cc-signed.zip
Get the file from here and flash

But I am getting error
Kapiljhajhria said:
Just flash it on rooted phone. Mine was rooted as well with twrp recovery. I just downloaded the ota update file and flashed it from recovery.
Flashed super su over it.
Wiped cache and dalvik
That's it. No problem.
It will take some time to reboot so don't worry.
Click to expand...
Click to collapse
But I am getting error while trying to update from twrp recovery..
Can you pls list the steps for installing the Update?
Do we need to unroot before installing?

maddydilip said:
But I am getting error while trying to update from twrp recovery..
Can you pls list the steps for installing the Update?
Do we need to unroot before installing?
Click to expand...
Click to collapse
My Yureka was rooted & TWRP recovery installed.
I got the OTA update & applied without a problem. :victory:
But Stock Recoery restored & phone is unrooted once update is applied.

maddydilip said:
But I am getting error while trying to update from twrp recovery..
Can you pls list the steps for installing the Update?
Do we need to unroot before installing?
Click to expand...
Click to collapse
what error are you getting?

Related

[Q] OTA fail to 4.010.38

i just update to 4.010.30 via OTA n recieved a new update to 38. but when try to install always fail..already unroot...is that any other way to install plase help
shin9999 said:
i just update to 4.010.30 via OTA n recieved a new update to 38. but when try to install always fail..already unroot...is that any other way to install plase help
Click to expand...
Click to collapse
Restore your recovery partition back to stock.
some how my problem same to shin9999, already unroot and also restore to stock.. but the installation keep fail.... dont know why..... could someone help?
We can't help you if you don't tell us more information...
Have you installed ANY patches of ANY kind into your current ROM? AdHoc fix? NFTS fix? Have you removed any stock apps, or frozen them at all?
ANY change at all to the stock ROM will cause the differential update to fail, as the file checksums will no longer match.
FloatingFatMan said:
We can't help you if you don't tell us more information...
Have you installed ANY patches of ANY kind into your current ROM? AdHoc fix? NFTS fix? Have you removed any stock apps, or frozen them at all?
ANY change at all to the stock ROM will cause the differential update to fail, as the file checksums will no longer match.
Click to expand...
Click to collapse
i just install custom rom before never change anything~~but i can get OTA 4.010.22 to 30,but fail to 38~~
shin9999 said:
i just install custom rom before never change anything~~but i can get OTA 4.010.22 to 30,but fail to 38~~
Click to expand...
Click to collapse
because 4.010.22 is a stock rom and it wiped your CWM recovery ( technically you're back to stock recovery... therefore the update to .30 went smooth )
did you guys re-rooted/CWM after you went to 4.010.30 ?? then un-rooted to updated to 4.010.38 ?
when you'd un-rooted... did you restored stock recovery ??
did you properly shutdown the device and transferred the zip file to root of SD Card and properly invoked the stock recovery ??
try the info outlined here
http://forum.xda-developers.com/showthread.php?p=15680953#post15680953
~~~~~

[Q] Can't update OTA 4.4.3 w/rooted stock GPE

Hi folks! I have a Galaxy S4 GPE, rooted and unlocked, but stock otherwise. When I try to run the OTA update for 4.4.3, the phone reboots into TeamWin recovery and appears to start installing. The install errors out though. Can I not install the OTA update because I'm rooted? If so, would reverting the rooting allow me to install? Thanks in advance for any help you can provide!
Install Stock recovery and then try again
Aamirx12 said:
Install Stock recovery and then try again
Click to expand...
Click to collapse
Is there a thread on how to do that? I seem to remember when I installed this recovery tool to root the phone, it wiped everything. Is it going to do that again? Because I don't want to have to keep wiping my phone every time a new Android update comes out just to be rooted.
1337squirrel said:
Is there a thread on how to do that? I seem to remember when I installed this recovery tool to root the phone, it wiped everything. Is it going to do that again? Because I don't want to have to keep wiping my phone every time a new Android update comes out just to be rooted.
Click to expand...
Click to collapse
Flash it via Odin or simply restore recovery from Nandroid backup..
http://forum.xda-developers.com/showthread.php?t=2265477
this may help you..
1337squirrel said:
Hi folks! I have a Galaxy S4 GPE, rooted and unlocked, but stock otherwise. When I try to run the OTA update for 4.4.3, the phone reboots into TeamWin recovery and appears to start installing. The install errors out though. Can I not install the OTA update because I'm rooted? If so, would reverting the rooting allow me to install? Thanks in advance for any help you can provide!
Click to expand...
Click to collapse
Follow this GUIDE (Method 1: Update Via Custom Recovery).
Joku1981 said:
Follow this GUIDE (Method 1: Update Via Custom Recovery).
Click to expand...
Click to collapse
I went through that method, and it's essentially the same thing, except that I'm downloading the actual update file myself and not letting Android handle it. Needless to say it didn't work. I also updated my TWRP to 2.7.1.0 and tried; no luck. I also uninstalled SuperSU to see if removing root would help. It didn't.
1337squirrel said:
I went through that method, and it's essentially the same thing, except that I'm downloading the actual update file myself and not letting Android handle it. Needless to say it didn't work. I also updated my TWRP to 2.7.1.0 and tried; no luck. I also uninstalled SuperSU to see if removing root would help. It didn't.
Click to expand...
Click to collapse
It's the problem of no read for be vague. It worked perfectly on the GPE of my sister. The update that appears in the website is ready for install it through custom recovery. Read all the guide:

Issues installing OTA update 2.1

Good morning, I am having issues installing the new OTA update for Oxygen OS. I have tried re-flashing the full 2.0.2 zip to get rid of root and then flashing the OTA but I get an error about unexpected contents (see attached screenshot). Any ideas please?
Swatto86 said:
Good morning, I am having issues installing the new OTA update for Oxygen OS. I have tried re-flashing the full 2.0.2 zip to get rid of root and then flashing the OTA but I get an error about unexpected contents (see attached screenshot). Any ideas please?
Click to expand...
Click to collapse
Not sure. I know I had to fully recover with the ROM from this thread. I flashed it in TWRP.
After flashing, I allowed the device to reboot, did minimal setup, and connect to WiFi. Immediately, I got an update to 2.0.2. After update finished, I put the 2.1 OTA zip on my internal storage, rebooted in NOW STOCK recovery, and attempted to install the 2.1 OTA. It said "failed," but when I rebooted it automatically seemed to apply the update and I booted up into 2.1. I don't know if that is helpful, but it's what worked for me. BE AWARE: After doing all this, my bootloader became locked again. I had to boot into system, enable unlock, and re-fastboot oem unlock.
EDIT: for awareness
unremarked said:
Not sure. I know I had to fully recover with the ROM from this thread. I flashed it in TWRP.
After flashing, I allowed the device to reboot, did minimal setup, and connect to WiFi. Immediately, I got an update to 2.0.2. After update finished, I put the 2.1 OTA zip on my internal storage, rebooted in NOW STOCK recovery, and attempted to install the 2.1 OTA. It said "failed," but when I rebooted it automatically seemed to apply the update and I booted up into 2.1. I don't know if that is helpful, but it's what worked for me. BE AWARE: After doing all this, my bootloader became locked again. I had to boot into system, enable unlock, and re-fastboot oem unlock.
EDIT: for awareness
Click to expand...
Click to collapse
Thanks very much for your reply - I will give this a go tonight when I finish work. Is there a specific ROM you flashed out of the two in the above links? :good:
Best do the newest, but the full 2.1.0 ROM has already been posted here:
http://forum.xda-developers.com/showpost.php?p=62942838&postcount=68
Just tried the above method but unfortunately it failed for me, couldn't get passed 2.0.2 - downloading full zip now.
I have 2.0.1, do i have to update to 2.0.2 first and then to 2.1?
Has anyone had some success?
You can try the above method but it did not work for me, just dirty flash the full 2.1 zip that is now available.
i am stuck on installing at TWRP. its saying this is for oneplus 2. this is oneplus 2. Error executing binary updater in zip.
Need help. what to do?
Sent from my ONE A2001 using Tapatalk
mehedi57 said:
i am stuck on installing at TWRP. its saying this is for oneplus 2. this is oneplus 2. Error executing binary updater in zip.
Need help. what to do?
Sent from my ONE A2001 using Tapatalk
Click to expand...
Click to collapse
Perhaps cause this is the OnePlus 2 forum and you have a One?
EddyOS said:
Perhaps cause this is the OnePlus 2 forum and you have a One?
Click to expand...
Click to collapse
No it is an issue with the current official version of TWRP. The device name was set to oneplus 2 instead of OnePlus 2. When installing the ota it is case sensitive. A new version is currently being worked on 2.8.7.1 which should resolve the issue.
For now it is best to just flash the full rom, It will install.
Thanks
Tried to download a full rom 2.1 and install via TWRP, but get the same message. Any tips where to download a full rom whos working, thanks.
Beta of TWRP 2.8.1 anywhere?

new update... for Asia version

I'm using clean slate rom.. but i got OTA update... I have attached the screenshot... can i install it?.. will it brick? or do I have to wait for new build cleanslate..
no don't update i did mistake updated 2 days ago now surfing with WiFi not connected most of time hide all connection some time connect bad update
Update :
After Reset Factory Setting my Wifi Now Ok So if anyone face this problem Make Factory Reset After OTA Update
Backup Before Doing This Ur User Data
thanks
It is a version for the firmware 1.89
you will work better if you have s-off.
so every room. s call-off.
hmmmm okay guys.. thanks for the info... when we will be getting atleast android 5.1!!
Doesn't look like we're going to get 5.1, the update schedule has us going straight to Marshmallow in early 2016
I am on 1.88.707.1 and have rooted my M9+ and have TWRP 2.8.7.0 recovery installed with S-ON (I installed Sunshine and it passed the tests and S-off can be done but I haven't.)
I also got this update notification, and downloaded it. But now, after the first reboot, it boots into TWRP and I have no clue how to apply this update.
Is there a way I can flash (only) stock recovery? How do I go about it? Can someone please help?
IndianHacker said:
I am on 1.88.707.1 and have rooted my M9+ and have TWRP 2.8.7.0 recovery installed with S-ON (I installed Sunshine and it passed the tests and S-off can be done but I haven't.)
I also got this update notification, and downloaded it. But now, after the first reboot, it boots into TWRP and I have no clue how to apply this update.
Is there a way I can flash (only) stock recovery? How do I go about it? Can someone please help?
Click to expand...
Click to collapse
you cant apply this update since you are rooted
karlanal said:
you cant apply this update since you are rooted
Click to expand...
Click to collapse
You can't do an OTA update with a custom recovery. Root is irrelevant.
str8upx said:
You can't do an OTA update with a custom recovery. Root is irrelevant.
Click to expand...
Click to collapse
So if i root my phone without the custom recovery im stil able to get OTA-s

Not geting any update after 7.10.14

hello guys
i am not getting any update after 7.10.14
can any one also facing it
i am rooted with magisk and also twrp is installed
i have also done no. of tweaks on my device
is there any solution to solve it
Red_Man 898 said:
hello guys
i am not getting any update after 7.10.14
can any one also facing it
i am rooted with magisk and also twrp is installed
i have also done no. of tweaks on my device
is there any solution to solve it
Click to expand...
Click to collapse
Same this side. I can see there is an update from the notifications. When I am clicking it.. its not opening.
Sent from my ONEPLUS A3003 using Tapatalk
When you install twrp, forget about updates. You need to flash full stock image using miflash application on Windows. I had the same problem, flashed stock images using miflash and update worked! I did not even lose my phone data.
Edit: Just boot into twrp to flash magisk. Don't flash twrp or system update will fill after downloading.
I was in the same situation (even if i've never flashed twrp).
Solved by flashing 17.10.30 Rom (after that I got the update)
Cheers.
tonycapuozzo said:
I was in the same situation (even if i've never flashed twrp).
Solved by flashing 17.10.30 Rom (after that I got the update)
Cheers.
Click to expand...
Click to collapse
How do I flash this version now ? I am already on 17.10.30
ProudRed said:
How do I flash this version now ? I am already on 17.10.30
Click to expand...
Click to collapse
Well...try re-flashing the same image or wait for the full November Rom.
Cheers
tonycapuozzo said:
Well...try re-flashing the same image or wait for the full November Rom.
Cheers
Click to expand...
Click to collapse
Just the boot image ? Where do I get the extracted boot image ?
If you have done multiple tweaks, I suppose that those were done to system directly. In such case you'll need to flash system partition as well. Both are included in full ROM, just extract them from archive http://en.miui.com/download-333.html.
https://www.youtube.com/watch?v=5Ozdhl-JdvU
give it a try.
If not getting updates (like: Your phone is already update) try to clean Google Service Framework app data from Settings - App - 3 dots on corner - Show system apps
If your device is rooted, then make clean installation of os. There will be ota update.
I am stock not rooted nor unlocked. Ad still stuck no more updates for me

Categories

Resources