Related
I tried connecting the tab to my 720p TV and all I get is the android mascot saying 720p? The sound however plays if I play some video. Does anyone else have this problem?
gIVE MORE INFO IT SHOULD JUST WORK
first ..
is your tablet Stock . some custom roms have issues with hdmi..
have you tested the cable with another device.. the micro hdmi cable seems to have a very high defective rate.
With the above known issues ..
if you are stock and you have your tv on the correct input device setting.
try connecting the cable set the tv correctly.. as in hdmi 3 in the tvs menue and the cable connected to port 3..
turn off both ..
turn on tv set it hdmi 3.
turn off your tablet. plug in the cable to iconia.. turn on tablet.. see if this works..
others have said this helps.. my hdmi port would not work correctly when i got my tablet had to hold the hdmi cable just right. this was only temporary for some reason.. g
GOOD LUCK..
Is the picture your seeing with the android figure on your Iconia or your tv?? Or both??? You should see a mirror image of your iconia on the tv. If your getting the message on the tv and the iconia is displaying its normal desktop image than your tv may not support 720p input or your iconia couldn't negotiate the resolution with your tv. Try a different hdmi port or a different tv and see what happens.
its stock with the latest os. The message only shows up on the TV. TV definitely supports 720p as that's what I am outputting my TV stb and my streaming box to. Hopefully this is just a case of a defective microusb cable. I could try it another TV, but it wouldn't tell me if the ddevice is defective or the cable. I guess I will have to buy another microusb cable aand hope it works.
If your seeing an image on your tv than I don't think its the cable. The Iconia just may not be able to talk to your tv properly. I would try it on another tv if able just to confirm. Also, turn your tv off, fully power down your tablet, plug together, first turn on tv, after tv is up and running then turn on your iconia. It seems to me that something is going on with the hdmi handshake and this should get your devices to talk to each other in the correct order.
cruise350 said:
If your seeing an image on your tv than I don't think its the cable. The Iconia just may not be able to talk to your tv properly. I would try it on another tv if able just to confirm. Also, turn your tv off, fully power down your tablet, plug together, first turn on tv, after tv is up and running then turn on your iconia. It seems to me that something is going on with the hdmi handshake and this should get your devices to talk to each other in the correct order.
Click to expand...
Click to collapse
My Iconia works fine, but I had this same issue on an older Toshiba laptop, and these procedures worked every time.
So I tried the above instructions turning both devices on, connecting, turning tv on first and then the iconia but still the same result. The green android mascot with the 720p? speech bubble. I guess I will have to try another tv somewhere.
Same issue for me, I bought this cable today for 19,99 €.
I read in an another thread (not in xda), that the problem is solved with a high quality cable (hdmi 1.3 or more, 39,99 €).
Or directly in the acer store : here.
Jut07 said:
Same issue for me, I bought this cable today for 19,99 €.
I read in an another thread (not in xda), that the problem is solved with a high quality cable (hdmi 1.3 or more, 39,99 €).
Or directly in the acer store : here.
Click to expand...
Click to collapse
Are you on a stock rom near stock.. Some of the Well cooked roms could have a issue with this function.. If you are on a custom rom.. Go to the rom developers thread and ask this Question . If you are on stock 3.2.1 the most current . I would try if you can to test your cable. If the cable is not bad Call ACER (GOOD LUCK WITH THAT). I know mine I put the cable in back of tv on HDMI 4 . SET THE TV Input to hdmi 4 and plug it in..
anyway good luck also people have said they needed to wiggly around there cable use caution doing so..
im using a 6€ cable from some cheap market and everything works fine with thors kernel 3.9r4..
i had many troubles with hdmi and other kernels.. tv and tablet have to be on and then plug in the cable.. thats the only way to get it working for me
Hi,
I have an appleTV and an Amazon Fire Stick, and the Nexus Player. All 3 are routed through my Yamaha RX-v3900 amp and then to the TV.
The AppleTV and the Amazon Fire stick both display netflix without issue. The Nexus displays all menus, but when you start playing content, the screen goes blank and you only get audio.
If I connect the Nexus directly to the TV, it plays fine.
I suspect this is an hdcp issue. I've called Google's support line. They suggested unplugging the Nexus, unplugging the amp, unplugging the TV. None of these steps worked. Although, unplugging the nexus caused Netflix not to be able to connect to it's servers, and the app had to be uninstalled and re-installed to get back the menu level.
Anybody else seeing this? Any thoughts on how to proceed?
Thanks,
Jim
jbresee said:
Hi,
I have an appleTV and an Amazon Fire Stick, and the Nexus Player. All 3 are routed through my Yamaha RX-v3900 amp and then to the TV.
The AppleTV and the Amazon Fire stick both display netflix without issue. The Nexus displays all menus, but when you start playing content, the screen goes blank and you only get audio.
If I connect the Nexus directly to the TV, it plays fine.
I suspect this is an hdcp issue. I've called Google's support line. They suggested unplugging the Nexus, unplugging the amp, unplugging the TV. None of these steps worked. Although, unplugging the nexus caused Netflix not to be able to connect to it's servers, and the app had to be uninstalled and re-installed to get back the menu level.
Anybody else seeing this? Any thoughts on how to proceed?
Thanks,
Jim
Click to expand...
Click to collapse
Not that this is all that practical but maybe swap out the amp for an hdcp compliant one? (I think that is a thing since it's passing through hdcp signals)
the netflix app for the player has HORRID HDCP compliance.. i returned mine because of this.. the app is just screwed if you dont have a very simplistic setup.. anything at all between the tv and the player will cause it to not function correctly.
HDCP
Xenosis said:
Not that this is all that practical but maybe swap out the amp for an hdcp compliant one? (I think that is a thing since it's passing through hdcp signals)
Click to expand...
Click to collapse
This amp is HDCP compliant. There is a bug in the Way nexus player handles HDCP with certain amps.
Yeah, the Amazon firestick and AppleTV both play through the Yamaha 3900 without HDCP issues, so the problem is with the Nexus player, or at least the Netflix implementation on the Nexus player. I'm also back to having resolution issues. Compared to both the fireTV and the AppleTV, the Nexus Player looks like crap.
I have no problem using the NP with my pioneer amp... Have you tried different inputs on the amp or different cables?
Sent from my SM-N900W8 using XDA Free mobile app
jbresee said:
Hi,
I have an appleTV and an Amazon Fire Stick, and the Nexus Player. All 3 are routed through my Yamaha RX-v3900 amp and then to the TV.
The AppleTV and the Amazon Fire stick both display netflix without issue. The Nexus displays all menus, but when you start playing content, the screen goes blank and you only get audio.
If I connect the Nexus directly to the TV, it plays fine.
I suspect this is an hdcp issue. I've called Google's support line. They suggested unplugging the Nexus, unplugging the amp, unplugging the TV. None of these steps worked. Although, unplugging the nexus caused Netflix not to be able to connect to it's servers, and the app had to be uninstalled and re-installed to get back the menu level.
Anybody else seeing this? Any thoughts on how to proceed?
Thanks,
Jim
Click to expand...
Click to collapse
I've had the exact same issue, it's the length of the HDMI cables. I use a 5 to 1 switch. Once I removed the Nexus Player and plugged it directly into the TV (3ft HDMI cable), it worked perfectly. My Logitech Revue had no issues, my raspberry pi and Chromecast also don't have any challenges. Seems the opamps for the NP might be a little weak (speculating).
d
Same exact issue here.
Receiver: Yamaha RX-V675
-Firmware 1.6 (up to date)
Netflix plays audio but no picture, youtube plays but is choppy.
TV shows resolution as 576p.
Alternate thread describing issue.
http://forum.xda-developers.com/nexus-player/help/low-resolution-receiver-t2940767
None of these issues are apparent when the player is connected directly to the tv.
Unfortunately this isn't a very good work around for me as my tv's digital audio out doesn't seems to perform well with my receiver. (cheap tv, seiki)
The issue seems isolated to the Nexus player as Chromecast and roku work perfectly through receiver. (Guess i won't be replacing them both with this device as soon as i hoped)
Sounds like hdcp, hopefully google pushes an update or a patch is discovered soon.
killerb7854 said:
Same exact issue here.
Receiver: Yamaha RX-V675
-Firmware 1.6 (up to date)
Netflix plays audio but no picture, youtube plays but is choppy.
TV shows resolution as 576p.
Alternate thread describing issue.
http://forum.xda-developers.com/nexus-player/help/low-resolution-receiver-t2940767
None of these issues are apparent when the player is connected directly to the tv.
Unfortunately this isn't a very good work around for me as my tv's digital audio out doesn't seems to perform well with my receiver. (cheap tv, seiki)
The issue seems isolated to the Nexus player as Chromecast and roku work perfectly through receiver. (Guess i won't be replacing them both with this device as soon as i hoped)
Sounds like hdcp, hopefully google pushes an update or a patch is discovered soon.
Click to expand...
Click to collapse
Excellent summary, BUT we can also add Google Movies & TV to the list. I get the exact same symptoms using a hdmi switch as I do with Netflix. Again, only direct connect works, all other devices (Chromecast, Raspberry Pi, Google TV, PS3) I run work just fine (even with Netflix & G Movie&TV.
Happy New Year!!
d
I assume you all are still experiencing this issue? I just purchased a NP and have the same issues with both Netflix and Google Play Movies. However, YouTube and Hulu play just fine. I have short high speed HDMI cables (very good quality ones) . I use a Denon 2000 receiver. Chromecast and ATV works well. I can't connect directly to the TV as a work around (that's another story)
unix4linux said:
I assume you all are still experiencing this issue? I just purchased a NP and have the same issues with both Netflix and Google Play Movies. However, YouTube and Hulu play just fine. I have short high speed HDMI cables (very good quality ones) . I use a Denon 2000 receiver. Chromecast and ATV works well. I can't connect directly to the TV as a work around (that's another story)
Click to expand...
Click to collapse
I figured out my issue. It was my directv box causing the issue. For some reason, it triggered the hdcp security on it for copy protected channels like hbo and showtime. It wouldn't let me play anything on those channels. The directv box was connected to the same receiver as the Nexus player. So, I reset the directv box and I was able to see my hbo and showtime TV again. When I tried to view videos on the NP via Google Play Movies and Netflix, it was working fine again ☺
Sent from my LG-D850 using Tapatalk
unix4linux said:
I figured out my issue. It was my directv box causing the issue. For some reason, it triggered the hdcp security on it for copy protected channels like hbo and showtime. It wouldn't let me play anything on those channels. The directv box was connected to the same receiver as the Nexus player. So, I reset the directv box and I was able to see my hbo and showtime TV again. When I tried to view videos on the NP via Google Play Movies and Netflix, it was working fine again
Sent from my LG-D850 using Tapatalk
Click to expand...
Click to collapse
bummer... I pulled power on everything. Then left the directv box off and powered everything up. Still can't get netflix to show a picture on the nexus player.
jbresee said:
bummer... I pulled power on everything. Then left the directv box off and powered everything up. Still can't get netflix to show a picture on the nexus player.
Click to expand...
Click to collapse
That didn't work for me either. I had to actually hit the reset button on the directv box (the red reset button). Try that
Sent from my LG-D850 using Tapatalk
Ok - did the reset button on the Directv, replaced all cables with shorter cables. Nada.
I finally routed the Nexus Player directly to the TV (works), then put a toslink opitcal out from the TV to the amp. Seems to be working, but it makes setting up to watch Android TV a PITA.
I wish they would fix the Nexus Player, but this is a decent work around.
Working now!
Looks like a recent update fixed this for me! Decided to try it today after noticing there was a new plex (not plex pass) app and realized that I hadn't tried through my receiver in a while. Connected it back up to my yamaha receiver and to my surprise, everything is working great! Netflix, google movies and the plex app connected through my receiver, audio AND video coming through as expected. Even the GUI Menu is showing the proper 1080p resolution.
Looks like I may finally be able to replace my roku/chromecast with the nexus.
Your mileage may vary but check your nexus to make sure it's up to date and give it another go!
Note: I am fairly confident an update was the fix as it was the only change to my setup. Simply plugged it in with the same cables/connections as my previous testing.
Good to hear! I was hoping for more stability with Netflix on the NP before I pull the trigger.
How about Dolby Digital/5.1 surround from Netflix? I read previously it only outputs in 2.0 stereo.
Thanks!
killerb7854 said:
Looks like a recent update fixed this for me! Decided to try it today after noticing there was a new plex (not plex pass) app and realized that I hadn't tried through my receiver in a while. Connected it back up to my yamaha receiver and to my surprise, everything is working great! Netflix, google movies and the plex app connected through my receiver, audio AND video coming through as expected. Even the GUI Menu is showing the proper 1080p resolution.
Looks like I may finally be able to replace my roku/chromecast with the nexus.
Your mileage may vary but check your nexus to make sure it's up to date and give it another go!
Note: I am fairly confident an update was the fix as it was the only change to my setup. Simply plugged it in with the same cables/connections as my previous testing.
Click to expand...
Click to collapse
latest update fixed my netflix issue as well....
I now can watch netflix going through my Yamaha amp. Yeah!
I'm using a NP 5.1.1 connected with a not recent Sony TV: KDL-40P550.
Time to time the screen goes black and return back in a few seconds.
During black screen the audio stream continues without any interruption.
The TV doesn't show any messages that could make me think about a connection loss: no messages on the display and, as told before, the audio stream continues.
The same TV with the same cable in the same hdmi port got correct signal from Chromecast, a PC with nVidia card, a MacMini 2010.
Any suggestion?
Anyone with same experience?
dariofinardi said:
I'm using a NP 5.1.1 connected with a not recent Sony TV: KDL-40P550.
Time to time the screen goes black and return back in a few seconds.
During black screen the audio stream continues without any interruption.
The TV doesn't show any messages that could make me think about a connection loss: no messages on the display and, as told before, the audio stream continues.
The same TV with the same cable in the same hdmi port got correct signal from Chromecast, a PC with nVidia card, a MacMini 2010.
Any suggestion?
Anyone with same experience?
Click to expand...
Click to collapse
I'm having the same issue now, we're you able to solve this?
Running into an odd issue where my Nexus Player (latest stable 5.1.1 release IIRC) will instantly lose the HDMI connection when I try playing a movie through Google Play Movies & TV. The weird thing is, the moment I press the back button to go back to the app's menu, it reconnects.
I'm using this HDMI switch (name printed here since I can't link to outside links): Kinivo 501BN Premium 5 port High speed HDMI switch with IR wireless remote and AC Power adapter - supports 3D, 1080p
Not sure if because I'm using this HDMI switch that it's causing the issue. I can watch YouTube and other stuff fine, and my Apple TV and Amazon Fire TV both play movies without an issue.
Having the Same Problem
I am having the same problem. Have you tried to bypass the switch?
It sounds to me like it's some sort of DRM which takes effect when the movie playback begins and is triggered because of the HDMI switch in between your Nexus Player and TV. A direct HDMI cable test is the only way to know for sure.
When I first got my switch and connected to my dvr I could not fast forward without the screen going black.
I plugged my nexus player straight into an hdmi port and the movies worked.
GabbyWC said:
It sounds to me like it's some sort of DRM which takes effect when the movie playback begins and is triggered because of the HDMI switch in between your Nexus Player and TV. A direct HDMI cable test is the only way to know for sure.
Click to expand...
Click to collapse
Yeah, that was my thought.
Sadly, though, I don't really have the space to give one of my three spots just to the Nexus when my other streaming devices work as intended, so I'll just have to ignore using that app until there's a fix down the road, if there's one.
I just switched to using a new TV over the weekend that's (finally!) 4k.
If it matters, the TV is the bleeding new Vizio P65-C1 also a good write up on the TV can be found here.
When I plug the Shield TV directly into the TV via HDMI and go to the Shield's settings then HDMI, it detects and shows (Recommended) next to 4K 60hz, which is what I set it to.
I can play YouTube 4K videos, I can watch anything I want without issue on Plex or Kodi, I can play all of my usual Shield exclusive games like Doom 3 or Portal without issue but for whatever reason, Netflix will just not play anything. Not just 4K/UHD content, just any content. I can move around through the Netflix menus and browse for what I want to watch without issue but when I try to actually play something it has no audio and freezes and might jump forward in broken increments or will be 100% frozen on the screen. I can stop it without issue and the app is otherwise responsive and not frozen.
I can Cast Netflix content to my Shield TV and it works without issue also. Correction, I cannot cast Netflix to the Shield TV. Same issues as trying to play locally. I was accidentally casting to my TV directly, which does work without issue. Both my TV and y Shield TV are hard wired to my router directly via ethernet.
It's only when I try using the Netflix app that is built-in.
The thing I noticed when I Cast vs the native app is it shows a loading progress screen and can take a few seconds depending on the contents quality to hit 100% then start playing. It seems like the native Netflix app is not trying to cache the content and seems like it's trying to direct stream it, which it cannot keep up with for some reason.
The same happens with cartoons, older shows that at best are available in 1080P like X-files or of course UHD/4K content. There is no different in the behavior between the different source videos in the native app.
I have already created a support request directly with Nvidia but wanted to see if others have encountered this as well and have any suggestions on what I can try to fix it?
Correction, I cannot cast Netflix to the Shield TV. Same issues as trying to play locally. I was accidentally casting to my TV directly, which does work without issue. Both my TV and y Shield TV are hard wired to my router directly via ethernet.
Hey man... Finally got some sun in Atlanta?? What a nice day....
Anyways...see the link below I answered for somebody else, see it applies to you. They key is HDCP2.2 compatible equipment all along your video signal, Shield (which is), receiver, TV input. If any isn't, it won't work.
http://forum.xda-developers.com/shield-tv/help/netflix-4k-issue-t3291720
MrBungle67 said:
Hey man... Finally got some sun in Atlanta?? What a nice day....
Anyways...see the link below I answered for somebody else, see it applies to you. They key is HDCP2.2 compatible equipment all along your video signal, Shield (which is), receiver, TV input. If any isn't, it won't work.
http://forum.xda-developers.com/shield-tv/help/netflix-4k-issue-t3291720
Click to expand...
Click to collapse
It was a beautiful pollen coated day today
I checked and sure enough the TV does support HDCP2.2. Though it also notes that while it's HDMI 2.0, it's not enabled yet and will be coming soon in a firmware upgrade. Makes me wonder if that'll fix this once it's available.
I'm still going back and forth with Nvidia as well but so far nothing other than answering some questions and sending them some logs.
From your TV user manual:
When connecting a HDMI 2.0 device, HDMI Color Subsampling needs to be enabled to support 4K resolution at 60hz.
reTARDIS said:
Though it also notes that while it's HDMI 2.0, it's not enabled yet and will be coming soon in a firmware upgrade.
Click to expand...
Click to collapse
Statement not correct... It support HDMI 2.0 out of the box. It's the HDMI 2.0a support that will be coming via a firmware upgrade.
the.teejster said:
From your TV user manual:
When connecting a HDMI 2.0 device, HDMI Color Subsampling needs to be enabled to support 4K resolution at 60hz.
Statement not correct... It support HDMI 2.0 out of the box. It's the HDMI 2.0a support that will be coming via a firmware upgrade.
Click to expand...
Click to collapse
Ah, good catch. I'm not as up to date on the HDMI specs/standards these days.
I'm guessing then that HDCP2.2 should work out of the box though but will contact Vizio support to confirm.
Just curious...have you tried different HDMI inputs?
"The new P-Series models will include: four HDMI 2.0a/HDCP 2,2 inputs, plus one additional HDMI that handles 4k/60p at 4:2:0, although it is listed as HDMI 1.4, Vizio told us. The HDMI 2.0a inputs will allow the Vizio displays to connect to new Ultra HD Blu-ray players to stream 4K with HDR10 metadata, something earlier Vizio 4K UHDTVs have lacked"
Are you connected to that "one" input?
MrBungle67 said:
Just curious...have you tried different HDMI inputs?
"The new P-Series models will include: four HDMI 2.0a/HDCP 2,2 inputs, plus one additional HDMI that handles 4k/60p at 4:2:0, although it is listed as HDMI 1.4, Vizio told us. The HDMI 2.0a inputs will allow the Vizio displays to connect to new Ultra HD Blu-ray players to stream 4K with HDR10 metadata, something earlier Vizio 4K UHDTVs have lacked"
Are you connected to that "one" input?
Click to expand...
Click to collapse
According to Vizio's support "The tv supports HDCP 2.2 on all HDMI ports" so I'm not sure. The manual does not detail specific ports at all for HDCP.
@reTARDIS I just bought the same TV and am seeing the same issue. I noticed that if I change the Audio setting for the show I'm watching from "English 5.1" to "English" the show streams correctly. I'm not sure why this is happening either.
oracleicom said:
@reTARDIS I just bought the same TV and am seeing the same issue. I noticed that if I change the Audio setting for the show I'm watching from "English 5.1" to "English" the show streams correctly. I'm not sure why this is happening either.
Click to expand...
Click to collapse
Interesting find. I'll test that on mine this evening.
@oracleicom I just tried this and confirmed it works for me as well. I send an update to Nvidia with this info to see what they have to say. Thanks for the workaround. It's not perfect but will do for the short term.
I would make sure you have a HDMI 2.0 cable (18Gb/sec), that's the only one that supports 4K @ 60fps with 4:4:4 chroma (color).
Use a port on the tv that supports HDMI 2.0.
I am having the same issue with Nvidia Shield and and the same TV. I was so excited when I got it today. I can also make it go with changing it english from 5.1. I had the Shield hooked up to a previous Vizio 4k TV and there was no issue. I am talking to Vizio support now and they want to blame the Shield even though it works fine with their previous 4K TV.
I also tested with my Nexus Player and it has the same issue.
@reTARDIS Did you ever get a reply from anyone at Vizio or Nvidia? On mine, everything but Netflix works fine, so maybe it is something that Netflix can fix in their Android TV app.
Correction, both Google Play Movies & TV and Netflix have the issue. Nvidia is saying it is Vizio's issue and Vizio is saying it is Nvidia's issue. I pointed out the Nexus Player has the same issue with the new Vizio and they have not replied.
reverik said:
@reTARDIS Did you ever get a reply from anyone at Vizio or Nvidia? On mine, everything but Netflix works fine, so maybe it is something that Netflix can fix in their Android TV app.
Click to expand...
Click to collapse
They've really not given any indication that they have a clear understanding on what is happening and every time I ask for an update, if they reply at all, it's just to say that they're still researching the issue.
They recently suggested that I test the following.
SHIELD TV HDMI out -> Vizio P65-C1 -> Vizio P65-C1 HDMI ARC to Pioneer SC-1522K
Initially, I didn't think this would work as I had thought TV's did not output anything via HDMI and could only input but after doing some further reading today into HDMI and ARC, I think it might work to output just audio from my TV via HDMI to the receiver using one of the HDMI ports that supports ARC but I have not yet tried this.
As a backup solution, I just ordered this USB to Optical audio adapter last night that others have said works with the Shield TV to output audio via USB to TOSLINK. The device includes a TOSLINK to SPDIF adapter. I plan on just using this to output SPDIF directly to my receiver to bypass the Vizio TV to see if this resolves the issue or not. I will update later once I've tested it out.
I'll report back my findings with both test.
Update: The same issue exist with the USB to SPDIF/Optical adapter straight into the SPDIF/Optical input on my receiver (bypassing the TV for audio).
I'm at a loss for what to try next and the issue has not gone away.
Update: I figured out how to make ARC via HDMI work from my TV to my receiver over the weekend and am now only using audio out for all devices connect to my TV via HDMI then out via the ARC HDMI port on my TV (HDMI 1) and into the ARC input on my Pioneer receiver. While audio works without issue for any connected device and the Shield TV in general, the same issue exist as before with 5.1 audio playback from Netflix on the Shield TV.
I also did a factory reset on my Shield TV this past weekend but sadly it didn't change/fix the issue which still persist.
I just cast to my TV now for Netflix and avoid using the Netflix app on the Shield TV.