Database Users

[Q] : Install 4.4.4 MIUI 6 On Yureka After Updating To Lollipop

Hey Guys , I ' m New To Android And New On Xda . I Updated My Yureka To Lollipop Yesterday And I Couldn ' t Tolerate The Lags And Issues So I Decided To Flash MIUI 6 From http://forum.xda-developers.com/yureka/development/rom-miui-v5-2-27-yureka-t3043035 . When I Flashed It According To 2nd Video Instruction By Dj408 , I Had Random Reboot Issue . I Really Dont Want To Go Back To Cm12 Unless The 'Issues Are Solved , Also Wanna Try MIUI . So Please Let Me Know If It ' s Possible To Install The MIUI 6 On My Yureka .
If It Helps :
- I Followed Mounting And Formatting Instructions Exactly As Mentioned In 2nd Video Using CWM , No Mistakes
- I Installed The Rom From SdCard1 Because I Had Not Copied It In Phone Memory
- Also , Before Random Reboot , During MIUI Setup , Wifi Networks Were Not Showing While They Worked On My CM12
- I Did Not Get The Message That Stock Recovery Would Be Installed After Clicking On Reboot System Now
Any Help Would Be Greatly Appreciated . Thanks In Advance

techfreak.rawmess said:
Hey Guys , I ' m New To Android And New On Xda . I Updated My Yureka To Lollipop Yesterday And I Couldn ' t Tolerate The Lags And Issues So I Decided To Flash MIUI 6 From http://forum.xda-developers.com/yureka/development/rom-miui-v5-2-27-yureka-t3043035 . When I Flashed It According To 2nd Video Instruction By Dj408 , I Had Random Reboot Issue . I Really Dont Want To Go Back To Cm12 Unless The 'Issues Are Solved , Also Wanna Try MIUI . So Please Let Me Know If It ' s Possible To Install The MIUI 6 On My Yureka .
If It Helps :
- I Followed Mounting And Formatting Instructions Exactly As Mentioned In 2nd Video Using CWM , No Mistakes
- I Installed The Rom From SdCard1 Because I Had Not Copied It In Phone Memory
- Also , Before Random Reboot , During MIUI Setup , Wifi Networks Were Not Showing While They Worked On My CM12
- I Did Not Get The Message That Stock Recovery Would Be Installed After Clicking On Reboot System Now
Any Help Would Be Greatly Appreciated . Thanks In Advance
Click to expand...
Click to collapse
Right now your on CM12 right..... Well sadly I have to say if your on CM12 then you can't downgrade your os now cox cm12 for yureka is based on 64bit and its already instructed before releasing the update and highly mentioned... Do not try to flash CM11 if your flash CM12 other wise your phone will be hard bricked.....

thanks for the reply . i really hate lollipop on yureka , m facing lots of issues like heating on normal usage and slow charging . i hope we get a MIUI port for lollipop soon . will be using unofficial cm12.1 for now

??? I wonder how your handset is still alive after flashing MIUI over cm12s and how you were able to flash unofficial CM12 (32bit) over it again?

[email protected] said:
??? I wonder how your handset is still alive after flashing MIUI over cm12s and how you were able to flash unofficial CM12 (32bit) over it again?
Click to expand...
Click to collapse
yeah , i updated to cm12 lollipop but it had many bugs so tried to flash MIUIv6 ( had no idea downgrade is not supported and might hard brick ) . i had frequent reboot issue on MIUI ROM even after following every instruction correctly . then i switched back to the buggy cm12 . found cm12.1 unofficial on xda and flashed it and the bugs and lags are gone , at least for now . . .

techfreak.rawmess said:
Hey Guys , I ' m New To Android And New On Xda . I Updated My Yureka To Lollipop Yesterday And I Couldn ' t Tolerate The Lags And Issues So I Decided To Flash MIUI 6 From http://forum.xda-developers.com/yureka/development/rom-miui-v5-2-27-yureka-t3043035 . When I Flashed It According To 2nd Video Instruction By Dj408 , I Had Random Reboot Issue . I Really Dont Want To Go Back To Cm12 Unless The 'Issues Are Solved , Also Wanna Try MIUI . So Please Let Me Know If It ' s Possible To Install The MIUI 6 On My Yureka .
If It Helps :
- I Followed Mounting And Formatting Instructions Exactly As Mentioned In 2nd Video Using CWM , No Mistakes
- I Installed The Rom From SdCard1 Because I Had Not Copied It In Phone Memory
- Also , Before Random Reboot , During MIUI Setup , Wifi Networks Were Not Showing While They Worked On My CM12
- I Did Not Get The Message That Stock Recovery Would Be Installed After Clicking On Reboot System Now
Any Help Would Be Greatly Appreciated . Thanks In Advance
Click to expand...
Click to collapse
i am facing problem i have installed tge miui 6 on my yureka its does not contains gapps n when i am steaming audio it trips sometimes plz help me out :'( thanks in advance ......

If Anyone Need Help I Help Here

You Can Ask Help Here
Send From My SM-G900F Using XDA-Developers Mobile App

Recently updated my old Nexus 10/Manta to OmniROM 6.0.1 and I couldn't be happier. I had a fair bit of messing around on the first try until I got the sequence right...full wipe, flash ROM, flash Gapps pico and everything works REALLY well.
However, installing nightly updates is the same for me as the initial flash...I have to do a full wipe or I get the Google Services loop.
Am i doing something wrong is that how nightlies work currently?
Thanks.

Omnirom 5.1.1 on Nexus7, i can't use any of custom kernel. The installation work fine but after reboot the kernel is not install.
Thanks
Sent from my Nexus 7 using XDA-Developers mobile app

Hi,
i'm rather new with rooting, flashing and all the stuff that comes with it.
Now i have an Oppo Find7 and i managed to install the following:
-TWRP recovery
-OmniRom 5.1 nightly
-Gapps 5.1
I'm pleased everything worked but now i saw OmniRom 6.0, when i tried to flash it with gapps i encountered the first problem:
-The install of OmniRom went well but when i try to install Gapps 6.0 stock, it is saying i dont have enough storage? Can i somehow increase or free up this storage to it can fit?
Second question: If the above is possible, is there a way to flash OmniRom 6.0 and Gapps 6.0 without the loss of data? or do i still have to backup and restore with titanium backup?
Thanks in advance

Hi ...I'm using SM-N900 with lollipop 5.0 ...
I need to update my framrware by installing new rom (marshmallows ). However most what I found is that they have problem with the camera ...
IS THERE ANY STABLE ROM SO I CAN USE IT ?
Regards
Sent from my SM-N900 using XDA-Developers mobile app

Request Icon Resize inbuilt utility for omni rom 6.0.1
Dear Concern,
I am using omni rom 6.0.1 rom on my oppo find 7a the room is very smooth with all working function.
but the apps icon size are very big please add some functionality to resize the icon ASAP.
or please confirm if i am missing this option in ROM
Thanks & Regards.
Balvinder Singh
[email protected]

Hi there,
I have a Nexus 7 2013 wifi. Latest omni marshmallow but I have one issue. Battery drain.
It seems as it does not suspend. Maybe someone could point me in the right direction to help squash this pesky bug.
What I can add is that I have a Nexus 5 with same apps and settings without the issue .
Thank you

wich to download for Find 7a
Hi I'm glad to see omni back, as I was a user on samsung galaxy s2 !!!
I left the rom when i moved to find 7a, but now i absolutely want to try it !
So simple question as I didn't found it anywhere:
For my Find 7a, should I download rom from folder :
1) Find7
2) Find7op
Thanks to all

St Exupery said:
Hi I'm glad to see omni back, as I was a user on samsung galaxy s2 !!!
I left the rom when i moved to find 7a, but now i absolutely want to try it !
So simple question as I didn't found it anywhere:
For my Find 7a, should I download rom from folder :
1) Find7
2) Find7op
Thanks to all
Click to expand...
Click to collapse
Find 7. Find7op is the One Plus One.

Clear, Precise, Thanks you !
Installing this we

Recently updated my old Nexus 10/Manta to OmniROM 6.0.1 and I couldn't be happier. I had a fair bit of messing around on the first try until I got the sequence right...full wipe, flash ROM, flash Gapps pico and everything works REALLY well.
However, installing nightly updates is the same for me as the initial flash...I have to do a full wipe or I get the Google Services loop.
Am i doing something wrong is that how nightlies work currently?
Thanks.

"I have version SuperSU-v2.65-20151226141550 and this I flashing automatically after each OTA.
Just copy SuperSU zip to "/sdcard/OpenDelta/FlashAfterUpdate" and disable Secure mode in settings of system update."
I got this step from oppo forum, and it work perfectly and now my question is :
can i do samething like that but this is for font ?
because everytime after update omni nightly, i need too flash my font again
thx u

Really Need Help..... I have a mediatek 6572 device called Innjoo i1k .....
And stock rom which is flash able through sp flash tool.... guide me that how i port mt6572 rom into my device actually it need some replacement of file that have in the stock rom... but i have stock rom in sp flash tool firmware format not in zip format... waiting for your reply .... will be very thank full to u..... thanks.....

Recently updated my old Nexus 10/Manta to OmniROM 6.0.1 and I couldn't be happier. I had a fair bit of messing around on the first try until I got the sequence right...full wipe, flash ROM, flash Gapps pico and everything works REALLY well.
However, installing nightly updates is the same for me as the initial flash...I have to do a full wipe or I get the Google Services loop.
Am i doing something wrong is that how nightlies work currently?
Thanks.

Help with Galaxy Express 3
ModeFX01 said:
You Can Ask Help Here
Send From My SM-G900F Using XDA-Developers Mobile App
Click to expand...
Click to collapse
I just upgraded from ZTE Maven running Android 5.1, to a Galaxy Express 3 running Android 6.0.1. love the phone, but for one thing. I playing a game called Walking War Robots. It played good on the 5.0, but really lags bad on the 6.0.1.. I thought the better phone would be better but it's worse. I've also noticed that the graphics are better for the 6.0.1, including shadows for robots, etc. I believe it adds to the problem. What I'd like to know, is there a way to improve the performance of my phone to get rid of the lag, or is there a way to disable enhanced graphics and make the game think I'm running 5.0 to get rid of the shadows and enhanced graphics. I can do without robot shadows for the sake of smooth gameplay. Any help will be greatly appreciated... YodaXIII

password reset?
I decided to try the official Nougat for my 6P. Before going there, I made a TWRP backup, which I used "adb pull" to get to my computer. After trying Nougat and deciding I didn't like it, I went back to Omnirom from the TWRP backup. At boot it asks for the decryption password, which works fine, and omnirom starts up correctly. It then prompts me for password after restart, and it insists that I enter the wrong one. What options do I have to get past this, other than a clean install and then recover my apps/data from backups?
[edit: solved it] I entered the file manager of TWRP and removed /data/system/locksettings* After this, the next reboot required decryption password, as expected, but did not require a lockscreen password, so all was fine and I could again set a new lockscreen protection.

I have a micromax unite 4 pro (Q465) but on google there is no recovery img for any recovery I request u to help me how can I install a custom recovery to flash a zip filee please help me

Need custom Rom for honor 6 h60-l04
Hi i'm using huawei honor 6 h60-l04...There is no custom rom available for this phone. Its a nice mobile with 3gb ram ..but no custom rom available.so anyone please build any custom rom ???:crying:

How can i upgrade HTC DESIRE 820
Hi,
i have htc desire 820s ,i want to upgrade my mobile 4.4.4 to 5.1 or other update version ,
any one guide me about that ,i have already my device rooted ,so please tell me how can i do
thanks

[ROM] [WIP] [P600] [TW 5.0.2] [help needed] Iron ROM port for Galaxy Note 10.1 2014

In this Thread I will port the Iron Rom from the Tab S to our Note 2014
Thanks to Tkkg1994 for making the awsome Iron Rom and xluco for the Kernel
Just to be clear: I didn't developed the Iron Rom (http://forum.xda-developers.com/galaxy-tab-s/development/prerooted-stock-touchwiz-rom-t2973107) nor the xluco Kernel (http://forum.xda-developers.com/showthread.php?t=2725193. I just put them together.
Ok, first how you install the Iron Rom: Download the Iron Rom for the T800 and the xluco Kernel for SM-P600 first and put them on external SD Card. After that go into Recovery and wipe EVERYTHING exept external storage. Maby you can also wipe system only but i highly recommend yout to wipe everything. Install now the Iron Rom and DO NOT CHECK REBOOT AFTER THE IRON ROM INSTALLATION, when it has finished, install the xluco kernel. Than do a Reboot. for me, the Rom took some time to boot, and often did some random reboots. when you see the assistant, you have to be very fast, dont configure anything, as I already said before, it will very likely crash after some time.
So, now why I opned this Thread: I'm not a developer, so I cannot do this by myself. Hope I will get some help, I know everybody is waiting for a Lollipop Custom Rom

good point mate ... Maybe I'm going to give other CRs of that a Try ... have you tried that with other Custom ROMs like AOSP ones or others ?

Yes, I did. In the past I could get a KitKat Rom from our big brother P900 running on my device using the same method as I used here.

wulkanat said:
In this Thread I will port the Iron Rom from the Tab S to our Note 2014
Thanks to Tkkg1994 for making the awsome Iron Rom and xluco for the Kernel
Just to be clear: I didn't developed the Iron Rom (http://forum.xda-developers.com/galaxy-tab-s/development/prerooted-stock-touchwiz-rom-t2973107) nor the xluco Kernel (http://forum.xda-developers.com/showthread.php?t=2725193. I just put them together.
Ok, first how you install the Iron Rom: Download the Iron Rom for the T800 and the xluco Kernel for SM-P600 first and put them on external SD Card. After that go into Recovery and wipe EVERYTHING exept external storage. Maby you can also wipe system only but i highly recommend yout to wipe everything. Install now the Iron Rom and DO NOT CHECK REBOOT AFTER THE IRON ROM INSTALLATION, when it has finished, install the xluco kernel. Than do a Reboot. for me, the Rom took some time to boot, and often did some random reboots. when you see the assistant, you have to be very fast, dont configure anything, as I already said before, it will very likely crash after some time.
So, now why I opned this Thread: I'm not a developer, so I cannot do this by myself. Hope I will get some help, I know everybody is waiting for a Lollipop Custom Rom
Click to expand...
Click to collapse
@wulkanat @hitman1376 were either of you able to get this ROM running on your device? If so, which build did you use? I've tried at least a dozen different configurations via Aroma Installer on both the 2.4.5 and 2.5 builds, but the SystemUI crashes on me within seconds of booting up every time.

raneym305 said:
@wulkanat @hitman1376 were either of you able to get this ROM running on your device? If so, which build did you use? I've tried at least a dozen different configurations via Aroma Installer on both the 2.4.5 and 2.5 builds, but the SystemUI crashes on me within seconds of booting up every time.
Click to expand...
Click to collapse
To be honest , I didn't try it out ... but , as the devices have so many things in common , it wasn't so odd ... but , does it happen the same on the MM ROM ?
With Best Wishes
Hitman1376​

hitman1376 said:
To be honest , I didn't try it out ... but , as the devices have so many things in common , it wasn't so odd ... but , does it happen the same on the MM ROM ?
With Best Wishes
Hitman1376​
Click to expand...
Click to collapse
You would think so. A couple years ago, it seemed like most apps/features were interchangeable between the Note 2014, Note Pro, Tab Pro, and Tab S on Kitkat. I distinctly remember my go-to ROM was originally designed for the Note Pro.
As far as IronROM V3.0 (MM) goes, the Aroma installer detected my device right away and put the kibosh on that experiment... not that it would have worked anyway seeing as how we don't have a 6.0.1 kernel... I was just hoping to get enough of the ROM installed so I could use TWRP's file manage to extract the files I want while still in recovery.
Anyway, now that my Note7 will be stuck with a non-rootable, unsupported, firmware for eternity; I figured it'd be fun to grab my old SM-P600 and see what havoc I can wreak on it.

raneym305 said:
You would think so. A couple years ago, it seemed like most apps/features were interchangeable between the Note 2014, Note Pro, Tab Pro, and Tab S on Kitkat. I distinctly remember my go-to ROM was originally designed for the Note Pro.
As far as IronROM V3.0 (MM) goes, the Aroma installer detected my device right away and put the kibosh on that experiment... not that it would have worked anyway seeing as how we don't have a 6.0.1 kernel... I was just hoping to get enough of the ROM installed so I could use TWRP's file manage to extract the files I want while still in recovery.
Anyway, now that my Note7 will be stuck with a non-rootable, unsupported, firmware for eternity; I figured it'd be fun to grab my old SM-P600 and see what havoc I can wreak on it.
Click to expand...
Click to collapse
Well , if you just want to play around , you can try out the stock Lollipop with my Prime Kernel and get better Performance and Battery or even CM13 / CM14 ... about the aroma , you can disable the device verification ... also I guess you can force the TW MM boot with Lollipop Kernel like it boots CM13 and CM14 ( I don't mean booting without any problems and also don't forget T-805's MM Kernels !! ) the Biggest problem is that we don't have a MM Bootloader which is the biggest problem ... anyway , this device is still so powerful to play newest games and OSs ... It's not fair to abandon it :laugh: ... You know ? I had a very busy day and I have been awake since around 6 AM when I woke for salat till now which is 12:41 AM :crying: !! so , My brain doesn't have any more juice and I need to get some sleep ... I hope you like my kernel ( esp. In case you'd like to test it out :laugh: ) ... I Updated it just some minutes ago
With Best Wishes
Hitman1376​

Lagging issue ???

My phone lagging too much in each and every ROM even stock in stock ROM. I have installed nearly all roms. But I can't find any suitable ROM for my device. Earlierly all ROMs works smooth & giving me good experience.
What should I do to make my device like earlier . I tried cleaning internal storage.
In your opinion which ROM is best .. Please help meeeeee..... .
And if is there any Whatsapp group for our device plzzz add me -7750905353
Device- Lenovo a6000 plus .

Badal meherr said:
My phone lagging too much in each and every ROM even stock in stock ROM. I have installed nearly all roms. But I can't find any suitable ROM for my device. Earlierly all ROMs works smooth & giving me good experience.
What should I do to make my device like earlier . I tried cleaning internal storage.
In your opinion which ROM is best .. Please help meeeeee..... .
And if is there any Whatsapp group for our device plzzz add me -7750905353
Device- Lenovo a6000 plus .
Click to expand...
Click to collapse
well, u should try dev harsh's latest official lineage.
keep using the stock kernel and do a clean flash
i.e format data , dalvik,cache and system.
also flash latest Gapps.
after flashing the rom give approx 30 mins for kernel to settlle down : it will b much smoother
i also suggest u to greenify some of the apps..
hope it helps

Help me for note 3 problem in games

Hello guys
I have a problem in game ashpalt 9 when i open it and start to play and racing the game stopped i dont know why thats is happen plz help me guys at this problem but i tried it on offical firmware worked fine tested it on others roms have sams bug but on offical firmware work good but i dont need to offical firmware so plz guys help me and thx
Sent from not3 rom AryaModV_V6.5_S7Edge

Hi, all ported roms have memory leak problem. You can not solve it. Specially android 6.0.1 roms are really bad for gaming. I advice you to use stock based roms like. Audax rom. Or use android 7 aosp roms like Linage rom. I advice this:
https://forum.xda-developers.com/ga...-resurrection-remix-n-v5-8-3-vanilla-t3615227
Dont use 6.0.1 roms and for now android 8 oreo roms

Thx for help and replay fast iwill try this rom and will reply on you

use lineage os 15.1, it's really awesome for gaming, i tried dead trigger 1 and 2 they working very silky smooth and very stable.

Thx for your replay
I alrdy use it now but there are some issue
Galaxy app and game launcher give me massage has been stopped idk why if u can help me
To be know i tried the rom u rocmended it for me but its not good a lot of apps say has stopped

I'm not sure... I have no issues with lineage 15.1. I don't have any "apps have stopped" error messages.

So pro can u gimme link what u use plz
If its work with u ok