hello
today i bricked my phone and i don't know what to do
first i was in cloudy g3 and i wipe the internal storage
then i want to back to the stock firmware with lg flash tool but i stuck in fastboot with lg logo
then i try this thread : http://forum.xda-developers.com/showthread.php?t=2582142
and i use D802 files for my vs980 :crying::crying:
then the phone power off but when i plugged in my pc, the phone detected as qhsusb_bulk in device manager
but without logo, no download mode,... anything
and i don't know what to do please help me :crying::crying::crying:
any help would be appreciated
I request someone to please provide me with a link to the CM12 stock recovery of yu yureka as i soft bricked my phone yesterday and i cannot download the whole CM12 firmware restore files at the moment. thank you!
kane111 said:
I request someone to please provide me with a link to the CM12 stock recovery of yu yureka as i soft bricked my phone yesterday and i cannot download the whole CM12 firmware restore files at the moment. thank you!
Click to expand...
Click to collapse
you mean you are able to go into recovery ?
or only able to see boot logo ?
if you soft brick your mobile i have solution for it.
Dont be panic. this will work for you.
i also had broke my yureka.
first of all you need to download tools and fast boot image.
Download Fastboot image
Download Flash tool
dont worry above tool has name for kitkat but this works for lollipop also.
now extract both zip file in one folder this is necessary.
now connect you mobile in fastboot mode.
now Run flash-all.bat.
CMD will open and it will do all the stuff for you.
dont disconnect you mobile
at the last CMD will close by itself now disconnect cable and start you phone :fingers-crossed: :highfive:
kane111 said:
I request someone to please provide me with a link to the CM12 stock recovery of yu yureka as i soft bricked my phone yesterday and i cannot download the whole CM12 firmware restore files at the moment. thank you!
Click to expand...
Click to collapse
http://d-h.st/oYvV
Unbrick lenovo a6000 plus (also lenovo a6000 ) :laugh:
most of the people facing the problem : (Bricked lenovo a6000/plus )
Device not showing in adb i'm i right ?
if yes follow the following things smile emoticon
1) install minimal adb and fastboot
2) install lenovo driver
3)install lenovo smart assistent
Now connect your phone to pc/laptop and pen minimal adb (py_cmd ) as administrator smile emoticon
now enter the following command :
adb shell
(now your device will not be listed )
Now enter the following command :
fastboot boot recovery.img
now you get thing like <waiting for device >
NOw remove battery and keep and now go to fastboot mode smile emoticon done your device will be listed and recovery will be flashed and now your device is ready to install custom rom smile emoticon try and give feedback if it works
if it works subscribe to my youtube channel youtube.com/user/thevinayvinu
A6000 Brick
My Lenovo A6000 hard brick or dead please help
no adb no fastboot no recovery nothing
just seen that on my PC
Qualcomm HS-USB QDLoader 9008
please help for un brick my phone
FaceZone said:
My Lenovo A6000 hard brick or dead please help
no adb no fastboot no recovery nothing
just seen that on my PC
Qualcomm HS-USB QDLoader 9008
please help for un brick my phone
Click to expand...
Click to collapse
PM me
VeerAmrit said:
PM me
Click to expand...
Click to collapse
done
After PM you
you did'nt replay
i need one help me to unbrick my device please
help please
contact arvind balaji ....a member of xda ...he is master in this smartphone he willl help you
FaceZone said:
My Lenovo A6000 hard brick or dead please help
no adb no fastboot no recovery nothing
just seen that on my PC
Qualcomm HS-USB QDLoader 9008
please help for un brick my phone
Click to expand...
Click to collapse
You cannot unbrick your phone unless you have a blank flash from Lenovo . Only way to unbrick is to give it to service center ,say nothing about rooting , just say the phone went dead while using .
FaceZone said:
help please
Click to expand...
Click to collapse
You never contacted after that
TWRP available for our device??
if you see that never ? do i see nothing is never i fixed it and i fixed a IMEI Null else so no never
Have you tried this ? to unbrick your device ? link is .txt file
FaceZone said:
My Lenovo A6000 hard brick or dead please help
no adb no fastboot no recovery nothing
just seen that on my PC
Qualcomm HS-USB QDLoader 9008
please help for un brick my phone
Click to expand...
Click to collapse
I dont have rights to put links in this post so i have uploaded this file
hope this will work !!!
must try and comment !!
try this method to unbrick your device !
FaceZone said:
After PM you
you did'nt replay
i need one help me to unbrick my device please
Click to expand...
Click to collapse
I dont have rights to put links in this post so i have uploaded this file
hope this will work !!!
must try and comment !!
try this method to unbrick your device
FaceZone said:
help please
Click to expand...
Click to collapse
I dont have rights to put links in this post so i have uploaded this file
hope this will work !!!
must try and comment !!
tink2hakk said:
Unbrick lenovo a6000 plus (also lenovo a6000 ) :laugh:
NOw remove battery and keep and now go to fastboot mode smile emoticon done your device will be listed and recovery will be flashed and now your device is ready to install custom rom smile emoticon try and give feedback if it works
if it works subscribe to my youtube channel youtube.com/user/thevinayvinu
Click to expand...
Click to collapse
No need of removing battery .
CWM showed up without removing battery.
Except it shows that battery shows 0% LOL
FaceZone said:
After PM you
you did'nt replay
i need one help me to unbrick my device please
Click to expand...
Click to collapse
Do one thing.
Connect charger to see if the phone is alive!
If it charges, then remove the charger and remove the battery.
Again insert the battery and then press vol up + vol down + power button together and that shall boot you into recovery mode.
If the above doesn't works, press vol down + power to boot into fastboot.
Phone will be on bootsplash screen and with borders and a warning named, "pressing the power button will restart phone"!
Connect to pc and flash CWM with command : fastboot flash recovery recovery.img [permanent CWM] or fastboot boot recovery.img [temporary CWM].
Best regards,
Kaustubh
DAMN!!
I have a bricked lenovo a6000 plus and dont know how to fix it. it charges and shows android logo with options namely 'reboot', 'wipe cache partition' etc. What should i do???. it doesnt even goes to reboot mode when i press the volume up and power button!!!
yes! twrp is available
swapnil0706 said:
TWRP available for our device??
Click to expand...
Click to collapse
yes twrp advanced recovery is available for lenovo A6000/plus
i cant share here coz iam junior member in xda
goto mightylenovoa6000andplus.blogspot.com if u want twrp or custom roms
twrp unable to mount data
while trying to flash lollipop through the twrp my phone has got stuck on logo of lollipop.
while in twrp it shows message like E unable to mount data.
plzz some one help me
Bricked Phone Need System.img and Boot.img
Hai guys,
I have a softbricked Lenovo A6000 plus, I have not taken any backup before it has bricked. So inorder to
recover my phone. I need the system.img and boot.img which can be found after you create a backup using twrp or any other Recovery software.So please can any one upload me your LenovoA600 plus's system.img and boot.img. Please help me
Hello Members, My Yureka is dead now. I have read some threads . some one said to backup image of emmc and it helps to recover the dead yureka. Today i have backup emmc partitions of working yureka phone. It's 14.5Gb image file when it compressed it became only 619mb. I am uploading this file in google drive. please help me to recover my yureka.
Download BACKUP.IMGg
my yureka not showing com port number with 9008 mode. help
I think i've bricked my yureka plus by flashing old yureka plus yu5510a ROM using YGDP tool, it didnt flash at all. showed error at 1%. Now my Yureka has different fastboot Screen(like this :-information , do not remove data cable. secure phone)
Now it doesnt boot and shows Nothing but text "Download failed images-cache" on top. i cant flash any rom . i cant run command becos fastboot mode is not showing.
Please help!!
Thanks in Advance