Q&A for [RECOVERY] CWM-based Recovery v6.0.5.1 for Yureka and ROOT
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY] CWM-based Recovery v6.0.5.1 for Yureka and ROOT. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Regarding to root yureka
vishal_android freak said:
I am not good at writing bigggg threads. So let's get straight to the point.
CWM v6.0.5.1 for YU Yureka​
Please note: You need to unlock your bootloader to flash this.
1.)Unlocking Bootloader:
1.) Power Down the device.
2.) Attach USB cable to your pc and then to your device. The LED near the speaker at the top goes red.
3.) As soon as the LED glows keep the vol up button pressed. You will see the fastboot screen.
4.)Now type in terminal:
Code:
fastboot -i 0x1ebf oem unlock
5.)This may delete all your data including the internal memory. Your bootloader is now unlocked.
6.) Now type this in terminal:
Code:
fastboot -i 0x1ebf flash recovery recovery-yu.img
7.) Done! Press vol up+ vol down + power button to boot into recovery. Flash SuperSu zip from here and attain root
What's working:
-flashing zips
-internal memory detected
-backup is successfully done.
What's not working:
I didn't get time to test much. You tell me
Kernel Sources: here
Downloads: recovery-yu.img
Click to expand...
Click to collapse
Can't i root without unlocking bootloader...?
patelsavan said:
Can't i root without unlocking bootloader...?
Click to expand...
Click to collapse
Not as of now. At least I wasn't able to, without unlocking bootloader. But there might be someone who will do it. Also bootloader unlocking won't cause warranty issues, so just do it
Andro noob here, how do I flash exactly?
Hello, I'm new to android development world, could you please explain where do I put the SuperSu zip before flashing? A detailed tutorial would be appreciated, thanks
Thanks man i'll do it as soon as i got mine,it's currently in transit....
VCH04 said:
Hello, I'm new to android development world, could you please explain where do I put the SuperSu zip before flashing? A detailed tutorial would be appreciated, thanks
Click to expand...
Click to collapse
EDIT: Got it, figured it out, sorry for double post
Yu Yureka phone struck on fast boot mode
Yu Yureka struck on fastboot mode , pls let me know how to recover. I tried to flash recovery-yu.img still it didn't worked, it just show FASTBOOT MODE. How to go to normal mode ?
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot -i 0x1ebf oem device-in
fo
...
(bootloader) Device tampered: true
(bootloader) Device unlocked: true
(bootloader) Charger screen enabled: true
(bootloader) Display panel:
OKAY [ 0.016s]
finished. total time: 0.016s
I have a que
What will happened if i connect my device in fastboot mode and try to unlock without installing drivers
Will it brick my device simply is there any chance of bricking of device in fastboot mode
i am in windows 8.1 i cant able to get fastboot drivers can some one get me fastboot drivers for YU in windows 8.1
cm12 nightly update
when is the cm12 nightly update going to receive to yu yureka because as at the launch it has been said that yu will be the first to receive update of cm12 so i am eagarly waiting for it
is it necessary to flash CWM first prior to rooting ?
or I can directly add superuser.zip through default recovery process.
Can I backup the original recovery image ? what's the process ?
Reverting back to stocknrecovery after 2nd reboot
I followed the whole method. Unlocked bootloader and flashed cwm.
When I booted first time after flashing cwm, it took me to cwm recovery normally. But when I rebooted the device again to recovery, there is no sign of cwm and device booted to stock recovery :/ . Any help please?
simranchaani said:
I followed the whole method. Unlocked bootloader and flashed cwm.
When I booted first time after flashing cwm, it took me to cwm recovery normally. But when I rebooted the device again to recovery, there is no sign of cwm and device booted to stock recovery :/ . Any help please?
Click to expand...
Click to collapse
untick cm update in developer option
this for coolpad f2 8675-HD (chipset mtk) or coolpad f2 8675-W00 (chipset msm)?
Fastboot mode command not working(Device not getting detected)
I first installed the ABD Drivers.
Then, as instructed i opened my device in the fast boot mode and entered the following command in CMD
fastboot -i 0x1ebf oem unlock
But CMD is stuck at <waiting for device>. What could be the reason?
I checked, my usb connection, and the phone is in fastboot mode, also on pc i pressed shift and right click as instructed and then pasted the above command.?
Please Help.
Enable the debug mode in developer option
Unable to root YU yureka
Hi Vishal,
I tried to root my yureka following your steps exactly as they are everything went smoothly without any error. But when I booted to recovery mode I still have the same default yureka recovery. I have enabled USB debugging, tested device connection in fastboot console using the devices command. But I haven't been able to successfully flash custom CWM recovery.
Can you please help me identify the problem and root the device? Any help is deeply appreciated.
Regards,
Raj
Edit: Finally got it to work I had to disable the CM update option under Developer Options. Thank you for a great post.
screen goes black after flashing recovery
after successfully flashing the recovery image through fastboot wen i press the combo of 3 buttons the screen goes black n nothing happens then.....plz help
whenever i try to boot from recovery it says image not complete or signed . i need solution.
same here. disabled update cyanogen recovery but still the phone takes be to stock recovery.
Related
Hi, sorry for being noob.
I updated my Yureka to Lollipop via OTA. Everything went smoothly and the phone was running great.
Then I decided to root my mobile and followed the instructions. Downloaded all adb tools and drivers for PC.
By holding shift key opened command window where the extracted adb files were.
Executed command 'fastboot -i 0x1ebf oem unlock'
Then Executed command 'fastboot -i 0x1ebf flash recovery recovery-yu.img'
And then blank..........nothing~!. Tried rebooting, taking out battery, putting it on and rebooting into recovery by holding vol+, vol- and power buttons. Just shows the YU logo and then phone turns blank. Would really appreciate your help guys. Worried :crying:
Solved : See My Last Post.
Same problem. Please help guys.
Did u turned on USB debugging before doing this...?
Flashed from my Yureka
TheIndianSinger said:
Hi, sorry for being noob.
I updated my Yureka to Lollipop via OTA. Everything went smoothly and the phone was running great.
Then I decided to root my mobile and followed the instructions. Downloaded all adb tools and drivers for PC.
By holding shift key opened command window where the extracted adb files were.
Executed command 'fastboot -i 0x1ebf oem unlock'
Then Executed command 'fastboot -i 0x1ebf flash recovery recovery-yu.img'
And then blank..........nothing~!. Tried rebooting, taking out battery, putting it on and rebooting into recovery by holding vol+, vol- and power buttons. Just shows the YU logo and then phone turns blank. Would really appreciate your help guys. Worried :crying:
Click to expand...
Click to collapse
same day same problem please help me if u find a solution....:crying:
Da_Gamer_pk said:
Did u turned on USB debugging before doing this...?
Flashed from my Yureka
Click to expand...
Click to collapse
Yes I had Done everything as mentioned......
Help please
same problem here.
unable to open recovery or bootloader
just YU Initial icon coming and looping.
i used fastboot -i 0x1ebf flash recovery yu-twrp-recoveryx64.img
PROBLEM SOLVED GUYS~!
I downloaded two files
1). cm-12.0-YNG1TAS0W0-tomato-signed-fastboot.zip
2). factory-image-flash-tools-windows-flashtools.zip
I extracted all the contents in one folder of PC. Connected phone in fastboot mode to PC. Then from the folder of PC, executed the flash-all.bat command by double clicking on it. Thats it, after that in a few minutes, My Yureka is alive again.
Here is the thread, please follow all instructions and hit thanks. :good: :laugh:
http://forum.xda-developers.com/yureka/general/yureka-cm12-lollipop-fastboot-zip-t3085621 by RohitJaiswal
TheIndianSinger said:
PROBLEM SOLVED GUYS~!
I downloaded two files
1). cm-12.0-YNG1TAS0W0-tomato-signed-fastboot.zip
2). factory-image-flash-tools-windows-flashtools.zip
I extracted all the contents in one folder of PC. Connected phone in fastboot mode to PC. Then from the folder of PC, executed the flash-all.bat command by double clicking on it. Thats it, after that in a few minutes, My Yureka is alive again.
Here is the thread, please follow all instructions and hit thanks. :good: :laugh:
http://forum.xda-developers.com/yureka/general/yureka-cm12-lollipop-fastboot-zip-t3085621 by RohitJaiswal
Click to expand...
Click to collapse
I have revived my Soft bricked Yureka Using this method. Many thanks.
Also want to conform here that I had PACMAN 5.1 beta while I bricked the phone. I tried this method on my friend's phone with Blisspop ROM too.
Peace. V
hi any 1 help me my android in yu logo showing "image signature verify fail" pls help any idea
fastboot driver
Everything is same except booting after giving the command my device was stuck on fastboot screen but after removing usb cable it boot up and running just like before but hadnt installed twrp.
Device = Yureka Plus
Os = COS12.1
same problem but my phone is not going to fastboot mode and when i pull battarty and re insert it ,, only red light will blow whatcan i do ..my phone is not starting
device- yureka aq5510
os- izer
recovery- twrp
same problem
some one plz help same problem
Hi guys,
Im on the cm12s, and unlocked bootloader but im unable to get into custom recovery, it keeps reverting to Cynogen recovery.
I tried toolkit also, it flashes and then it shows waiting for device, i manually boot into recovery its just a blank screen.
Please help i need root and ROMS
varun.gid said:
Hi guys,
Im on the cm12s, and unlocked bootloader but im unable to get into custom recovery, it keeps reverting to Cynogen recovery.
I tried toolkit also, it flashes and then it shows waiting for device, i manually boot into recovery its just a blank screen.
Please help i need root and ROMS
Click to expand...
Click to collapse
how did you unlock bootloader ?
may be using adb drivers right ?
so if you are using adb drivers then follow this procedure ....
copy this recovery file in your adb folder LINK
now go to adb folder
now press and hold shift button and right click on empty space there you will see open cmd , click on it cmd will open
now copy below code (this is for CM12 only)
Code:
fastboot -i 0x1ebf flash recovery recovery_twrp.img
anow right click in cmd and click on paste.
hit enter and after a while you will se 'Okay ' message at the end.
bingo you have flasher recovery :highfive: :good:
ashish_zarekar said:
how did you unlock bootloader ?
may be using adb drivers right ?
so if you are using adb drivers then follow this procedure ....
copy this recovery file in your adb folder LINK
now go to adb folder
now press and hold shift button and right click on empty space there you will see open cmd , click on it cmd will open
now copy below code (this is for CM12 only)
Code:
fastboot -i 0x1ebf flash recovery recovery_twrp.img
anow right click in cmd and click on paste.
hit enter and after a while you will se 'Okay ' message at the end.
bingo you have flasher recovery :highfive: :good:
Click to expand...
Click to collapse
I tried this method.. but it always reverts to stock recovery. and when i boot into recovery directly from fastboot i get a blank screen. Please help.
varun.gid said:
I tried this method.. but it always reverts to stock recovery. and when i boot into recovery directly from fastboot i get a blank screen. Please help.
Click to expand...
Click to collapse
have you tried with this recovery which i provided in link ?
first try using this recovery.
earlier i also face this.
now go to this thread download software from this thread only. there are two thread for this tool but i prefer you to go to this one.
GUIDE
now unlock bootloader.
and go for step 4(which flash twrp recovery)
now flash the recovery which is provided by me using code.
and now go can go into recovery
****************************************************************************************************
i suggest you this guide this method do for me
Disable update CM recovery option in developer options... Then flash custom recovery.... it will work.
once flashing twrp recovery, you will need to use
Code:
fastboot -i 0x1ebf reboot
command.
remove battery after install recovery before restarting phone
then insert battery and start in custom recovery
install Custom Recovery
1) enable developer options
2)enable advance reboot and usb debugging
3)disable Update CM recovery option
4)reboot to bootloader and flash recovery
" fastboot -i 0x1ebf flash recovery recovery_twrpyulolli.img "
5) directly disconnect phone (phone displaying FASTBOOT MODE)
6) remove battery and start phone in recovery mode using volume UP+DOWN and power key
7) And YOUR are IN TWRP RECOVERY ......
THIS method work for me perfectly .....i m also having same problem of flashing custom recovery and again showing CM RECOVERY
:laugh::laugh:
Thank You...!
Which is best for yureka cwm or twrp recovery
I'm facing the same problem but this trick didn't work for me.
I Have a big issue and need your help
I was OOS3 and do all the correct steps to get modified TWRP to setup custom rom and succeeded on this they I decide to back agaon to OOS3 as it`s more sable
So I download OOS3 and flash it from my Modified Recovery and works fine
Than I decide to enter the recovery just to clear the cash for agood performance and here .. the issue started ...
when I click reboot to recovery , the mobile stopped @ 1+ LOGO So I remmember that this modified recovery is not working with oos3
so I get the steps for unloacking the boatloader again to flash the recovery compatible with OOS3
and HERE .. I see my device when I type
fastboot devices ,,,
but once I type "fastboot oem unlock" it`s show my ok and device rebooted in the same 1+ LOGO
SO I now Stuck in this logo
Cannot enter the recovery Or even the OOS3 just can enter the fastboat mode
Please I need your help how can I manage this
I think your thread will get moved to the General section. But in the meantime try this it worked for me
https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
Sent from my ONE A2005 using XDA-Developers mobile app
Use the search button before posting.. There atleast 4 threads with the solution.
Wrong section
the command you're looking for is not the unlock one but this one: fastboot flash recovery "twrp-2.8.x.x-xxx.img" just replace "twrp-2.8.x.x-xxx.img" with the name of the recovery .img you have in the same folder as fastboot.
Ahmed Shawky said:
I Have a big issue and need your help
I was OOS3 and do all the correct steps to get modified TWRP to setup custom rom and succeeded on this they I decide to back agaon to OOS3 as it`s more sable
So I download OOS3 and flash it from my Modified Recovery and works fine
Than I decide to enter the recovery just to clear the cash for agood performance and here .. the issue started ...
when I click reboot to recovery , the mobile stopped @ 1+ LOGO So I remmember that this modified recovery is not working with oos3
so I get the steps for unloacking the boatloader again to flash the recovery compatible with OOS3
and HERE .. I see my device when I type
fastboot devices ,,,
but once I type "fastboot oem unlock" it`s show my ok and device rebooted in the same 1+ LOGO
SO I now Stuck in this logo
Cannot enter the recovery Or even the OOS3 just can enter the fastboat mode
Please I need your help how can I manage this
Click to expand...
Click to collapse
First read the Forum Rules on posting, moved here out of the Development Section....
fastfreddy101 said:
the command you're looking for is not the unlock one but this one: fastboot flash recovery "twrp-2.8.x.x-xxx.img" just replace "twrp-2.8.x.x-xxx.img" with the name of the recovery .img you have in the same folder as fastboot.
Click to expand...
Click to collapse
How Can I do this and I even can not unlock the boatloader ?
should still be unlocked - put phone in fastboot mode, check for it via: fastboot devices. If its there then just flash the recovery with: fastboot flash recovery "twrp-2.8.x.x-xxx.img" then reboot into recovery. should work
fastfreddy101 said:
should still be unlocked - put phone in fastboot mode, check for it via: fastboot devices. If its there then just flash the recovery with: fastboot flash recovery "twrp-2.8.x.x-xxx.img" then reboot into recovery. should work
Click to expand...
Click to collapse
I can`t unlock the phone
Thanks for your reply
My situation now that I`m stuck in boot loop and I can`t enter any think , only the fastboat mode and I can not unlock my device
every time I tried to Unlock it , till me Fail to unlock
I follow this steps with no change
http://www.technobuzz.net/unbrick-oneplus-2/
In this video also with no hope
https://www.youtube.com/watch?v=R4SVSovw4Jo
Ahmed Shawky said:
Thanks for your reply
My situation now that I`m stuck in boot loop and I can`t enter any think , only the fastboat mode and I can not unlock my device
every time I tried to Unlock it , till me Fail to unlock
I follow this steps with no change
http://www.technobuzz.net/unbrick-oneplus-2/
In this video also with no hope
https://www.youtube.com/watch?v=R4SVSovw4Jo
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/oneplus-2/general/firstaid-zip-revert-h2os-mm-beta-to-lp-t3306967 to get back your old twrp and then follow the instructions from here https://forums.oneplus.net/threads/installation-instructions-faqs-oxygenos-3-0-0.439108/ carefully (use the tread for users already have twrp)
When did you lock the phone again after unlocking it?
Assuming the phone shows up when running "fastboot devices" try running this "fastboot -i 0x2a70 oem unlock-go" - worked for me
Hello,
I need help about my yureka plus on android (YU5510A),
I bought yureka plus yesterday and it comes on stock android 4.4.4 (Kitkat), I try to install custom rom and connect my phone to my laptop with help of YUWARE and try to unlock the bootloader in fastboot mode, it shows the successful message, but phone cant restart, I restart it manually, but it stuck on Yureka logo, trying again for flashing TWRP, same thing happen.
My phone (YU5510A) stuck on yureka plus logo.
So please help me.
Best Regards
Sadique A
sadique2804 said:
Hello,
I need help about my yureka plus on android (YU5510A),
I bought yureka plus yesterday and it comes on stock android 4.4.4 (Kitkat), I try to install custom rom and connect my phone to my laptop with help of YUWARE and try to unlock the bootloader in fastboot mode, it shows the successful message, but phone cant restart, I restart it manually, but it stuck on Yureka logo, trying again for flashing TWRP, same thing happen.
My phone (YU5510A) stuck on yureka plus logo.
So please help me.
Best Regards
Sadique A
Click to expand...
Click to collapse
your device is soft bricked from where i see,
download the drives first for your device link :- https://androidmtk.com/download-yu-usb-driver
download adb platform tools:- https://dl.google.com/android/reposi...st-windows.zip
download recovery:- https://dl.twrp.me/tomato/
download the fast-boot firmware:- http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS8A4-tomato-signed-fastboot-a7a306cebd.zip
download factory image maker :- https://drive.google.com/open?id=0BxGRG9YXw62rUWNLMjdNaGt1a2s
method 1
extract the fast boot firmware and factory image maker in same folder. then follow these steps.
put your phone in fast-boot mode and type fastboot -i 0x1ebf oem unlock (will unlock your bootloader)
and now find flash_all.bat file in the folder where you extracted all files and run as admin. let the process finish you would be back at stock firmware with no boot loops.
if you don't want to go to factory image then
method 2
boot your phone in fastboot and type
fastboot -i 0x1ebf oem lock (to lock your bootloader)
fastboot -i 0x1ebf oem unlock (to unlock your boot loader) as you used yuware or something that might created problem in bootloader so follow both.
fastboot -i 0x1ebf flash recovery name_of_recovery.img
and let it flash recovery then boot into recovery go to advance wipe format data type yes and swipe, install any custom rom and flash gapps done.
if you face still boot loops follow method 1 and flash roms later.
P.s while in fast-boot remove sim cards and memory cards from your phone and then run any commands.
and while flashing any roms please do remove sim cards.
Bhavesh_khatri said:
your device is soft bricked from where i see,
download the drives first for your device link :- https://androidmtk.com/download-yu-usb-driver
download adb platform tools:- https://dl.google.com/android/reposi...st-windows.zip
download recovery:- https://dl.twrp.me/tomato/
download the fast-boot firmware:- http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS8A4-tomato-signed-fastboot-a7a306cebd.zip
download factory image maker :- https://drive.google.com/open?id=0BxGRG9YXw62rUWNLMjdNaGt1a2s
method 1
extract the fast boot firmware and factory image maker in same folder. then follow these steps.
put your phone in fast-boot mode and type fastboot -i 0x1ebf oem unlock (will unlock your bootloader)
and now find flash_all.bat file in the folder where you extracted all files and run as admin. let the process finish you would be back at stock firmware with no boot loops.
if you don't want to go to factory image then
method 2
boot your phone in fastboot and type
fastboot -i 0x1ebf oem lock (to lock your bootloader)
fastboot -i 0x1ebf oem unlock (to unlock your boot loader) as you used yuware or something that might created problem in bootloader so follow both.
fastboot -i 0x1ebf flash recovery name_of_recovery.img
and let it flash recovery then boot into recovery go to advance wipe format data type yes and swipe, install any custom rom and flash gapps done.
if you face still boot loops follow method 1 and flash roms later.
P.s while in fast-boot remove sim cards and memory cards from your phone and then run any commands.
and while flashing any roms please do remove sim cards.
Click to expand...
Click to collapse
Need custom recovery
TWRP 3.0.2 not supported by YU5510A
sadique2804 said:
Need custom recovery
TWRP 3.0.2 not supported by YU5510A
Click to expand...
Click to collapse
TWRP is custom recovery itself, using it on my device since year, works fine you might have flashed wrong twrp. Try rom the link provided and remove every thing from phone before flashing twrp.
Bhavesh_khatri said:
TWRP is custom recovery itself, using it on my device since year, works fine you might have flashed wrong twrp. Try rom the link provided and remove every thing from phone before flashing twrp.
Click to expand...
Click to collapse
I know TWRP is custom recovery
But in my phone (YU5510A, Stock Android 4.4.4) it is not supported.
Whenever I am trying to install, it corrupt the recovery and the firmware of my phone.
After installing TWRP 3.0.2.0 (downloaded from official website under tomato section) my phone cant boot, it stuck on YU logo.
If you have the link please share.
sadique2804 said:
I know TWRP is custom recovery
But in my phone (YU5510A, Stock Android 4.4.4) it is not supported.
Whenever I am trying to install, it corrupt the recovery and the firmware of my phone.
After installing TWRP 3.0.2.0 (downloaded from official website under tomato section) my phone cant boot, it stuck on YU logo.
If you have the link please share.
Click to expand...
Click to collapse
Like i said your device is soft bricked try methods i suggested, but recovery should work fine press vol up+ vol down+power button to boot into recovery you would be able to use TWRP. if not try to flash recovery again as i said yuware might have introduced some bugs install as i suggested. your device stuck at boot loop has nothing to do with recovery not working.
---------- Post added at 08:03 PM ---------- Previous post was at 07:50 PM ----------
Try to flash older versions here is 2.8.4.0 if you on kit-kat or any,
https://dl.twrp.me/tomato/twrp-2.8.4.0-tomato.img
https://dl.twrp.me/tomato/twrp-2.8.5.0-tomato.img
https://dl.twrp.me/tomato/twrp-2.8.6.0-tomato.img
type
fastboot -i 0x1ebf flash recovery twrp-2.8.4.0-tomato.img
remove simcards and memory cards while flashing. hope this helps.
I flashed cm12.1 officially signed, and it worked and i recovered my device, but i want to flashed custom rom and it needs a custom recovery.
That's the problem, and I tried 2.8.7 and 2.8.6 and 2.8.5.
Currently I am on official cm12.1 with cm recovery.
I m also facing same problem.
---------- Post added at 08:26 PM ---------- Previous post was at 08:26 PM ----------
sadique2804 said:
I flashed cm12.1 officially signed, and it worked and i recovered my device, but i want to flashed custom rom and it needs a custom recovery.
That's the problem, and I tried 2.8.7 and 2.8.6 and 2.8.5.
Currently I am on official cm12.1 with cm recovery.
Click to expand...
Click to collapse
Your problem solved bro?
sadique2804 said:
I know TWRP is custom recovery
But in my phone (YU5510A, Stock Android 4.4.4) it is not supported.
Whenever I am trying to install, it corrupt the recovery and the firmware of my phone.
After installing TWRP 3.0.2.0 (downloaded from official website under tomato section) my phone cant boot, it stuck on YU logo.
If you have the link please share.
Click to expand...
Click to collapse
TRY TO UNLOCK BOOTLOADER FIRST.
Twrp won't install properly if the bootloader is locked.
IF THIS HELPS CLICK THANKS :good:
Hangs twrp
My phone got hanged at twrp yureka plus yu5510A stock lollipop plz help
ray pember said:
My phone got hanged at twrp yureka plus yu5510A stock lollipop plz help
Click to expand...
Click to collapse
Flash latest version of twrp using adb
Here is the link
https://dl.twrp.me/tomato/twrp-3.1.1-0-tomato.img.html
My device 5510a I install twrp but touch not working properly so plz help me....next what I do
sadique2804 said:
Hello,
I need help about my yureka plus on android (YU5510A),
I bought yureka plus yesterday and it comes on stock android 4.4.4 (Kitkat), I try to install custom rom and connect my phone to my laptop with help of YUWARE and try to unlock the bootloader in fastboot mode, it shows the successful message, but phone cant restart, I restart it manually, but it stuck on Yureka logo, trying again for flashing TWRP, same thing happen.
My phone (YU5510A) stuck on yureka plus logo.
So please help me.
Best Regards
Sadique A
Click to expand...
Click to collapse
hello for yureka i have some files I hope u don't try fastboot cause yureka have limited rom memory i have some files i encountered the worst case . i went to local vendor he did it for 3dollar. nd yes i read some yureka have a different board in the differnet country so files are bit messed up feel free to message i have somefiles try the luck or better search other thread developers are not doing a lot nowadays i was trying ubuntu but somehow sad life
Hii I have yu yureka plus (yu5510a) the phone is starting and stuck at YU logo after that blue screen appears and phone can't go ahead .
And When i connect the phone with pc it can't detected and an error shows in phone that "do not disconnect the data cable" & in bottom left "your phone is not secure" please help
DWYOR
After a long time of googling I got a solution for yu5510a full access.
You need
Adb + fastboot
Twrp 2.8.7.0 tomato
SuperSU.zip
Coolpad drivers
Cyanogen ROM V1 from firmwarefile.com
Any Custom Rom, I am using aosp extended.
Gapps
Memory card
Install all drivers , adb & fastboot.
First flash Cyanogen ROM using YGDP tool
Use version 3.98 in other versions I got problems.
After ROM installation enable developer option.
Enable android debugging, fast reboot and check update cyanogen recovery
Now connect phone with PC
Goto adb folder
Copy twrp.img in adb folder
Shift + Right click select open command window here
Type adb devices
Device should be shown if not showing try to install adb drivers
Now after that
Type Command adb reboot-bootloader
Device will be rebooted in bootloader
Type command fastboot -i 0x1ebf oem device-info to verify device in fastboot mode and your bootloader is unlocked or not.
If bootloader showing unlocked then follow next process if not then unlock it
Type command fastboot -i 0x1ebf oem unlock
Boot loader unlocked now.
Remove data cable and remove battery from phone for 30 secs and reinsert again.
Press volume + key and hold
Attach phone with PC ( it shows fastboot mode)
After that type command
fastboot -i 0x1ebf flash recovery twrp.img
When done remove data cable & battery
After 30 secs reinsert battery
Press Volume + , Volume - & Power key
When yu logo appears release power key and keep pressing both volume keys
You will be goto twrp
Now wipe everything also format data/don't delete mmc
Restart twrp to recovery
Your internal and external storage are mounted.
Install any custom ROM for yureka/yureka plus
Flash gapps ( not required in miui & quarkos)
Flash SuperSU.zip
Reboot
It takes 10-15 minutes for first boot .
Done
Flash Latest NON-HLOS.bin before flashing any volte ROM.
Flash through fastboot
File link
https://drive.google.com/file/d/0B8Vodzmhc0GlXzdtOUFjb29EOFU/view
Extract .zip
Copy NON-HLOS.bin in adb folder
Open command prompt here
Connect phone into fastboot mode
Type command
fastboot -i 0x1ebf flash modem NON-HLOS.bin
Wait till process done.
Disconnect phone
Remove battery and insert again
Goto twrp recovery.
Install any volte enabled ROM.
Enjoy.:good:
OEM unlock command not found
hi,
I am trying to root my yu yureka plus( YU5510A white color) running android 5.1.1 , build number is 5.1.111.P0.160314.YU5510A , i am able to connect the phone to my PC running adb,
"adb devices" lists the phone , "adb reboot bootloader" puts the phone in fastboot ( screeen doesnt show fastboot instead it shows do not disconnect usb cable and non secure phone). When i run the command fastboot -i 0x1ebf oem unlock , im getting the error as command not found. same error im getting when i run the command fastboot -i 0x1ebf oem device-info
what could be the reason.
Any help in this regard is appreciated.
nischait said:
DWYOR
After a long time of googling I got a solution for yu5510a full access.
You need
Adb + fastboot
Twrp 2.8.7.0 tomato
SuperSU.zip
Coolpad drivers
Cyanogen ROM V1 from firmwarefile.com
Any Custom Rom, I am using aosp extended.
Gapps
Memory card
Install all drivers , adb & fastboot.
First flash Cyanogen ROM using YGDP tool
Use version 3.98 in other versions I got problems.
After ROM installation enable developer option.
Enable android debugging, fast reboot and check update cyanogen recovery
Now connect phone with PC
Goto adb folder
Copy twrp.img in adb folder
Shift + Right click select open command window here
Type adb devices
Device should be shown if not showing try to install adb drivers
Now after that
Type Command adb reboot-bootloader
Device will be rebooted in bootloader
Type command fastboot -i 0x1ebf oem device-info to verify device in fastboot mode and your bootloader is unlocked or not.
If bootloader showing unlocked then follow next process if not then unlock it
Type command fastboot -i 0x1ebf oem unlock
Boot loader unlocked now.
Remove data cable and remove battery from phone for 30 secs and reinsert again.
Press volume + key and hold
Attach phone with PC ( it shows fastboot mode)
After that type command
fastboot -i 0x1ebf flash recovery twrp.img
When done remove data cable & battery
After 30 secs reinsert battery
Press Volume + , Volume - & Power key
When yu logo appears release power key and keep pressing both volume keys
You will be goto twrp
Now wipe everything also format data/don't delete mmc
Restart twrp to recovery
Your internal and external storage are mounted.
Install any custom ROM for yureka/yureka plus
Flash gapps ( not required in miui & quarkos)
Flash SuperSU.zip
Reboot
It takes 10-15 minutes for first boot .
Done
Click to expand...
Click to collapse
nithin1664 said:
hi,
I am trying to root my yu yureka plus( YU5510A white color) running android 5.1.1 , build number is 5.1.111.P0.160314.YU5510A , i am able to connect the phone to my PC running adb,
"adb devices" lists the phone , "adb reboot bootloader" puts the phone in fastboot ( screeen doesnt show fastboot instead it shows do not disconnect usb cable and non secure phone). When i run the command fastboot -i 0x1ebf oem unlock , im getting the error as command not found. same error im getting when i run the command fastboot -i 0x1ebf oem device-info
what could be the reason.
Any help in this regard is appreciated.
Click to expand...
Click to collapse
Try without using 0x1ebf and report.
nischait said:
Try without using 0x1ebf and report.
Click to expand...
Click to collapse
I tried without -i 0x1ebf also but it does not show in fastboot. With -i 0x1ebf it shows "xyznumbers fastboot" . The problem now is , I flashed through YGDP tool and now it shows aboot failed image, and does not boot at all.
Why doe my phone show non secure phone ?
Please help.
Yogesh1969 said:
I tried without -i 0x1ebf also but it does not show in fastboot. With -i 0x1ebf it shows "xyznumbers fastboot" . The problem now is , I flashed through YGDP tool and now it shows aboot failed image, and does not boot at all.
Why doe my phone show non secure phone ?
Please help.
Click to expand...
Click to collapse
Download cyanogen ROM and flash it with ygdp
1st ever rom uploaded in AFH.
Your device should be boot up.
Then try with command prompt.
May be new device having different device ID.
nischait said:
Try without using 0x1ebf and report.
Click to expand...
Click to collapse
Hi...
I too face the same problem, I tried fastboot adb and YU yureka drivers reinstalling and connected device to PC it gets charger when connection in on, when connected in fastboot mode on device it shows fastboot but when check in PC for device info, it dosen't show any connected device. I followed many tutorials for this to install TWRP but its impossible to install without establishing a proper connection. I also tried to install TWRP without PC, for this i need to root my device and flash TWRP img, so I started trying root I had used kingroot, kingoroot, towelroot and some more but failed to root, I am still trying to install TWRP can anyone help me in either of the process to install TWRP.
nischait said:
Download cyanogen ROM and flash it with ygdp
1st ever rom uploaded in AFH.
Your device should be boot up.
Then try with command prompt.
May be new device having different device ID.
Click to expand...
Click to collapse
I couldnt find the ygdp version of Cynogen, any way I found a way from youtube which solved my problems.
Link : https://www.youtube.com/watch?v=2Gpz65r2pNM
---------- Post added at 05:21 PM ---------- Previous post was at 05:18 PM ----------
vijaykumarbabu079 said:
Hi...
I too face the same problem, I tried fastboot adb and YU yureka drivers reinstalling and connected device to PC it gets charger when connection in on, when connected in fastboot mode on device it shows fastboot but when check in PC for device info, it dosen't show any connected device. I followed many tutorials for this to install TWRP but its impossible to install without establishing a proper connection. I also tried to install TWRP without PC, for this i need to root my device and flash TWRP img, so I started trying root I had used kingroot, kingoroot, towelroot and some more but failed to root, I am still trying to install TWRP can anyone help me in either of the process to install TWRP.
Click to expand...
Click to collapse
For drivers problem install pdanet. And you can refer to the youtube video link (above post) if you want for all needs.
vijaykumarbabu079 said:
Hi...
I too face the same problem, I tried fastboot adb and YU yureka drivers reinstalling and connected device to PC it gets charger when connection in on, when connected in fastboot mode on device it shows fastboot but when check in PC for device info, it dosen't show any connected device. I followed many tutorials for this to install TWRP but its impossible to install without establishing a proper connection. I also tried to install TWRP without PC, for this i need to root my device and flash TWRP img, so I started trying root I had used kingroot, kingoroot, towelroot and some more but failed to root, I am still trying to install TWRP can anyone help me in either of the process to install TWRP.
Click to expand...
Click to collapse
Getting your device connected is a very important stage, whether it is system,recovery or fastboot. From what I read , you can connsct through fasatboot, since you flashed cyanogen. Just flash TWRP 3.2.1 or so which is the latest, through fastboot:
fastboot flash recovery twrp.3.2.1 .img ( Remember the spaces, the name twrp.xxx.img should be same as you downloaded. If flash is successful, you can see twrp when you boot to recovery. Then flash supersu file and/or whichever rom you want.
Sorry for late answers.
I was lil busy and sorry for wrong address also.
You could get it from firmwarefile.com
I can't post link here but select yu yureka plus variant and download oldest CBP