MA6 Kernel (Mardon+Androidarmv6)
This Kernel is based on the latest androidarmv6 github sources with added governors and I/O shedulers.
The Kernel should work on CM11-Kernel3 releases from team androidarmv6.
Kernel now available for Galaxy Ace
Tested on my ace and Kernel works fine.
Changelog:
2014-12-26 added I/O sheduler zen
2014-12-26 added governors badass, SmartassV2 & SmartassH3
Compatibility:
CM11 (cm11-Kernel3 builds)
Download (CM 11 - Kernel3):
MA6.kernel-3.x.cooper-20141226.zip
md5: 8949a33e6fae61a2ce1933ead421b242
Click to expand...
Click to collapse
Download (ROM CM 11 - with integrated MA6 Kernel3):
cm-11-20141226-UNOFFICIAL-cooper.zip
md5: b3887a2a81fc33471069e194c868db0c
Click to expand...
Click to collapse
Features:
Governors
badass
interactive
smartassH3
smartassV2
conservative
userspace
powersave
ondemand
performance
I/O-Sheduler
noop
deadline
cfq
zen
Sources: https://github.com/MardonHH/android_kernel_samsung_msm
Credits:
Thx to androidarmv6 team for base Kernel sources
Mirrors are not allowed also sharing direct links on other forums/sites is not allowed!
If you want to share, only share the link to this thread.
Buy me a Beer
XDA:DevDB Information
MA6 Kernel 3.x, Kernel for the Samsung Galaxy Ace S5830
Contributors
Mardon
Source Code: https://github.com/MardonHH/android_kernel_samsung_msm
Kernel Special Features:
Version Information
Status: Testing
Created 2014-12-27
Last Updated 2014-12-27
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sorry i didn't flash any custom kernel before can you please mention the installation steps
The Rom installation fails for me. Thanks for the awesome kernel.
tillward said:
The Rom installation fails for me. Thanks for the awesome kernel.
Click to expand...
Click to collapse
Flashing the Rom requires a full wipe and an additionally format system
Nice work can't wait to try it.. surprising to see development still going on this device, even if it has slowed down. Mardon any chance you could do a compile of all cm's (cm9-cm11) with this kernel or is it only able to be compiled for cm11
Sent from my GT-I9305 using XDA Free mobile app
Can anyone tell me what is different between 2.6 kernels and this one(kernel 3).after installation this kernel what will happen?thanks
successfully installed and here is my review:
-its the best kernal for cm11
-it fixed the random reboots problem
-i thing that you should add over lock to 902
-and its really fast
Mardon said:
Flashing the Rom requires a full wipe and an additionally format system
Click to expand...
Click to collapse
I've done a full wipe. I get a code 0 installation aborted error.
Could it be some kind of root issues.
I've flashed and installed 100s of custom roms in the past, and your other roms seem to run on this device.
I tried re-downloading in case the file was damaged, but no luck. Kernel works fine.
tillward said:
I've done a full wipe. I get a code 0 installation aborted error.
Could it be some kind of root issues.
I've flashed and installed 100s of custom roms in the past, and your other roms seem to run on this device.
I tried re-downloading in case the file was damaged, but no luck. Kernel works fine.
Click to expand...
Click to collapse
Last CWM recovery is required for new androidarmv6 roms.
@Mardon keep in mind that we still haven't fixed audio stuttering/wakeup delay
I am using that version CWM. I still get the installation error code.
EDIT:
Tried re-installing CWM update and it worked. Thanks very much. Booting as we speak.
EDIT 2:
Which is the best GAPPS to flash?
The mini gapps package i made
Gesendet von meinem LT18i mit Tapatalk
Mardon said:
The mini gapps package i made
Gesendet von meinem LT18i mit Tapatalk
Click to expand...
Click to collapse
I tried mini-gapps-cm11-20141213-signed.zip but no Gapps were visible after boot. I'll try again.
Would gapps-kk-20141215-minimal-x-plus-edition-gps032-160dpi_signed work ok?
I updated Mini GApps yesterday to 20141227!
Use them.
Gesendet von meinem LT18i mit Tapatalk
Thank you. Got them.
Should I avoid running the OTA update cm-11-20141227-NIGHTLY-cooper.zip?
Everything is running fine, but i've hit a problem.
The keyboard appears to be missing, so I can't login to wifi to set the phone up.
There's no file browser either, so I can't install a 3rd party keyboard.
Is there any way around this? Flashable keyboard app?
You can just wait a few minutes/hours for complete CM11 ROM modified by Mardon - [ROM][CM11] - modded - [nightly-20140806]
Krteq said:
You can just wait a few minutes/hours for complete CM11 ROM modified by Mardon - [ROM][CM11] - modded - [nightly-20140806]
Click to expand...
Click to collapse
EDIT: I just tried cm-11-20141227-NIGHTLY-cooper++.zip, but still no keyboard.
Keyboard is working fine!
Did you forgot to format system before flashing the rom? only factory reset is not enough!
Yup. That was it. Sorry.
All working now.
I can't install any apps though, as storage is full. I was going to partition an SD card and run Link2SD, however there isn't enough space (19mb) to install Link2SD. How do you guys get around this?
Thanks for the wonderful rom and kernel.
Related
[ROM] [AOSP JellyBean] Project SleekyBean - First Release [Nightly 20140215] [DOWNLOAD IS WORKING]
Welcome to my second Rom!
This Rom is based off Maclaws AOSP Jelly Bean 4.2.2. The sole reason why I made this was because for speed and reliability purposes. We all know AOSP has the best all round stability. As it is still a young project, I am hoping to make it grow with your support.
Features:
- Stock, pure, Jelly Bean!
- Really fast for first release!
- Cool boot animation!
- Keyboard actually responds much better!
- Get the full Google Nexus experience!
Changelog:
[20140215] - First release! (Added Seeder and some performance adjustments)
1. Download my Rom
2. Go into your CWM 5.0.2.6 recovery
3. Wipe Data, Cache and Dalvik Cache!
4. Reboot (takes 3-5 mins on first boot)
5. And enjoy!
Disclamer: DO IT AT YOUR OWN RISK. I AM NOT RESPONSIBLE FOR ANY FAULTS/BRICKS/DAMAGE. I HAVE JUST WARNED YOU.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks to: Maclaw Team and Tovagulet (for the boot animation )
Source: GitHub
XDA:DevDB Information
[ROM] [AOSP] [JellyBean] Project SleekyBean, a ROM for the Samsung Galaxy Ace S5830
Contributors
TheUnknownThing
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 2.3.x
ROM Firmware Required: CWM 5.0.2.6
Based On: AOSP
Version Information
Status: Testing
Beta Release Date: 2014-02-15
Created 2014-02-15
Last Updated 2014-04-19
Downloads
Link to Download!
Gapps and Google Play Services are included in the Rom!
Enjoy!
Great work...
GT-S5830 cihazımdan Tapatalk 2 ile gönderildi
does ext part works ?
wow another jb rom
i am really excited about this now
will try it definitely when it arrives
New ROM! :laugh: Great!
Download ASAP! (when links are available)
Download will be up today guys! Stay tuned!
placeholder not allowed,,, follow the rules guys
btw good job,,, :good:
TheUnknownThing said:
Download will be up today guys! Stay tuned!
Click to expand...
Click to collapse
Hi Unknownthing
Thanks for your works.i have four questions,please answer:
1-has your rom"theme chooser"?
2-has your rom"cpu overclocking"?
3-has your rom"notificating setting",to add notification toggles.
I want pura android like Aosp roms,but this rom's options is very low however is stablest.
4-all roms that i have used had"linux version:2.6.x",but your rom's linux version is 3.1.x.what is diference between them?
Thanks a lot
Persian Ace said:
Hi Unknownthing
Thanks for your works.i have four questions,please answer:
1-has your rom"theme chooser"?
2-has your rom"cpu overclocking"?
3-has your rom"notificating setting",to add notification toggles.
I want pura android like Aosp roms,but this rom's options is very low however is stablest.
4-all roms that i have used had"linux version:2.6.x",but your rom's linux version is 3.1.x.what is diference between them?
Thanks a lot
Click to expand...
Click to collapse
Well, in Cyanogenmod roms, they have theme chooser (not aosp)
Since this Rom is AOSP (nexus like experience) you cannot change the toggles. You also can nearly move any app to sd.
You can overclock the cpu as much as you like (998mhz is the max)
Before you download, I can tell you that it runs much better than Cm10.1+
TheUnknownThing said:
Well, in Cyanogenmod roms, they have theme chooser (not aosp)
Since this Rom is AOSP (nexus like experience) you cannot change the toggles. You also can nearly move any app to sd.
You can overclock the cpu as much as you like (998mhz is the max)
Before you download, I can tell you that it runs much better than Cm10.1+
Click to expand...
Click to collapse
hmmm,, and are you sure this 3.x kernel sources ????? i think ace cant get that..
Rhievaldo said:
hmmm,, and are you sure this 3.x kernel sources ????? i think ace cant get that..
Click to expand...
Click to collapse
You are right, generally ARMv7 compatible processors and newer chipsets use 3.x. Sorry I made that mistake.. Just changed it!
TheUnknownThing said:
You are right, generally ARMv7 compatible processors and newer chipsets use 3.x. Sorry I made that mistake.. Just changed it!
Click to expand...
Click to collapse
good
Thread closed
Unfortunately this thread will be closed temporarily.
1) No Downloads
2) No kernel source links
OP has been notified, and when is ready to post links, thread will be re-opened.
Thank You
MD
EDIT: Thread re-opened at request of OP
TheUnknownThing said:
Well, in Cyanogenmod roms, they have theme chooser (not aosp)
Since this Rom is AOSP (nexus like experience) you cannot change the toggles. You also can nearly move any app to sd.
You can overclock the cpu as much as you like (998mhz is the max)
Before you download, I can tell you that it runs much better than Cm10.1+
Click to expand...
Click to collapse
Ok thanks.then i wont able to install "cronmod-in2ext4+"patch for increasing internal memory by using ext4 partition.right?last times i was using link2sd but this app was inconvenienced me.i was ticking"Autolink" in link2sd's settings,but it didnt work sometimes.
Is there any app to work instead notification toggles?to turn on or off wiifi,gps,mobile data,sound and...?
Thank you.i am waiting for your rom is uploaded.
Persian Ace said:
Ok thanks.then i wont able to install "cronmod-in2ext4+"patch for increasing internal memory by using ext4 partition.right?last times i was using link2sd but this app was inconvenienced me.i was ticking"Autolink" in link2sd's settings,but it didnt work sometimes.
Is there any app to work instead notification toggles?to turn on or off wiifi,gps,mobile data,sound and...?
Thank you.i am waiting for your rom is uploaded.
Click to expand...
Click to collapse
You will be able to use Link2Sd (I am using it) Unfourtanatly, I am not aware of any apps which can modify toggles. I have also uploaded the Rom! I have placed the link in the second post! Enjoy!
TheUnknownThing said:
You will be able to use Link2Sd (I am using it) Unfourtanatly, I am not aware of any apps which can modify toggles. I have also uploaded the Rom! I have placed the link in the second post! Enjoy!
Click to expand...
Click to collapse
Thanks man.i download your rom and will post my feedback.i have been seen a widget about toggles in my friend phone's homescreen.if i found this app/widget will report.
Thank you
Anybody else having problems downloading this? Mediafire straight up ignores me when I am trying to download :-/
TheUnknownThing said:
Link to Download!
Gapps and Google Play Services are included in the Rom!
Enjoy!
Click to expand...
Click to collapse
Confirmed!
Hi The Unknown Thing
Download link you provided is invalid!!!it squandered my 2-3 hours of my time.please recheck your download link.
Thank you
I can't able to download it from MediaFire !!!
Can you mirror it to Google Drive or Dev-Host ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Smooth like Butta
Note
This rom is only for the snapdragon intl. variant of the Xiaomi Mi 3
Follow on G+: Team Vanir
Vanir Team:
NuclearMistake
Sonicxml
DHO
PrimeDirective
Features:
Welcome to VanirAOSP. Our mission is to deliver a clean optimized version of Android with subtly improved versions of the features you love to as many devices as possible. we've tried to incorporate and improve our features in a way that makes them more cohesive to improve the overall user experience while correcting any performance regressions and improving functionality..
What to expect:
- This is not a McCopy ROM. What goes into our build is well thought-out and not a bunch of stuff duck taped together because we could.
- maximum optimization. We do our research. We test hard. We build -fstrict -O3 globally and include a massive array of code optimizations and memory leak fixes that we write ourselves and eventually submit to AOSP or Linaro.
- originality in our source. We generate a lot of new commits being features or general code improvements. We are open source to share and improve the community but we also try to make sure we offer a unique experience.
- aesthetics.. hopefully in your opinion
General features:
stock mode - ability revert to stock AOSP code with the exception of a few custom features we chose to keep active
enhanced performance.. longer uptime with less slowdown
custom written CRON and init.d.
UI and graphics improvements
custom navbar, navring, and hardware key features
improved notification handling (active display & halo are in review also)
usability improvements like power reboot menu and sound
animation control
Improved Vanir keyboard
CM's profiles & quicksettings
additional quicksetting tiles
immersive mode
statusbar mods
clock & battery mods
lockscreen blur and other mods
soon to come -> quick cam and flash notifications
busybox, embedded root, init.d, cron etc
yatta yatta yatta
more to come when i feel like updating the op
Changelog from Gerrit:
**Vanir Open Status
** Vanir Alternative Open Status
**Vanir Merged Status
** Vanir Alternative Merged Status
Download links removed until further notice
Vanir Github:
**VanirAOSP Git
Gapps:
**4.4.x PA Gapps
Bugs
Everything is fixed(Thanks to @varun.chitre15 and @qiwu
Don't hesitate to report in this thread
Installation Instructions
Make sure you're running cwm before attempting installation
Backup current rom
Full wipe
Install ROM
Install Gapps
Coming from any other aosp rom
Make sure you're running cwm before attempting installation
Backup current rom
Wipe cache/wipe dalvik cache
Install ROM
Install Gapps
Thanks
TeamVanir @varun.chitre15 & @qiwu: For making cm11 almost bugless
Source
Device(Kernel source also included)
Vendor
XDA:DevDB Information
VanirAOSP 4.4.4, ROM for the Xiaomi Mi 3
Contributors
##W4TCH0UT##, varun.chitre15, qiwu
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 2
Beta Release Date: 2014-09-01
Created 2014-09-01
Last Updated 2014-09-01
Reserved
CHANGELOGS
Build 2:
-Fixed sensors(Thanks to @varun.chitre15)
Build 1:
-Initial release
Stable version? No reboots? Because one of the big problems with the cm11 rom its the randoom reboots
rsimas said:
Stable version? No reboots? Because one of the big problems with the cm11 rom its the randoom reboots
Click to expand...
Click to collapse
Read the op,"Same bugs as in cm11"
##W4TCH0UT## said:
Read the op,"Same bugs as in cm11"
Click to expand...
Click to collapse
Yap i read but in rom information it says status: stable
OMFG!!! Thank you so much!!
Anybody that tried?
Anyone try it ??is that stable to an extend of capable to run daily
Yes. Only the sensors are not working which is fixed by @varun.chitre15 in his code. I'll build a new build as soon as I get time.
Changed the status to beta, seeing the development of cm11.
Sent from my GT-I9082 using Tapatalk
Report
Anyone missing dialer app in app drawer?
And I have found that the proximity sensor is not working
Build 2 is uploaded!
-Fixed sensors(Thanks to @varun.chitre15 and @qiwu)
Now everything is fixed thanks to qiwu and varun.Yippee!
There are 2 files with the same name.Download the one with a (2) beside it. Delete the (2) before flashing as it might not flash.
Enjoy!
Hey guys, is the sensor issue fixed in the new build, please report.
Sent from my GT-I9082 using Tapatalk
##W4TCH0UT## said:
Hey guys, is the sensor issue fixed in the new build, please report.
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
All sensors have been fixed huh? Yesterday i flashed CM 11 but auto brightness doesn't work so does it work here?
Fyzher said:
All sensors have been fixed huh? Yesterday i flashed CM 11 but auto brightness doesn't work so does it work here?
Click to expand...
Click to collapse
So auto brightness will not work here also as this ROM is based on cm11.
Sent from my GT-I9082 using Tapatalk
My initial thoughts after installing the ROM...
ROM installed without any issues..
Auto rotate works.
In call speaker works...
Camera works..but need more time to test...
No reboot so far...but need more time to test...
No inbuilt music player...
Very smooth..
Will report more later...
pratyush997 said:
OMFG!!! Thank you so much!!
Click to expand...
Click to collapse
Pratyush since you using 2 ROM's as well - I just had a question wonder if you can help me with that
I am on TDB as well - Using for now Miui5 & AOKP - Now issue is whenever I flash a new ROM on System1 i.e. where AOKP is at the present - Post that Miui doesn't boot - It would be stuck at MI Logo.
So again I need to flash Miui5 as well which is pretty irritating. If I am not doing anything to System2 then why after any install on System1 affects it - Any Clue Mate - Thanks in Advance :good::good:
My Antutu score in performance mode...way better than balance mode who scored only 26500 and also better than miui v6 which scored 35600...
Just a quick note on reboot issue...whenever I put in my pant pocket and take it after a longtime it reboots...other than that I didn't had reboot issue..
Great ROM...
Hey watchout.... happy to see u on mi3 thread
btw i have created an mi forum.....check it out and letme know if you want to edit something
http://en.miui.com/thread-40547-1-1.html
I have lot of reboots since morning..not sure what is the problem..reverted to miui v6..:crying::crying:Looking forward for a fix...
praveen7682 said:
I have lot of reboots since morning..not sure what is the problem..reverted to miui v6..:crying::crying:Looking forward for a fix...
Click to expand...
Click to collapse
Hmm.. I'll see to it. Was it happening earlier?
Sent from my GT-I9082 using Tapatalk
DarkCyanogenMod 4.4.4 for the Samsung Galaxy S Advance
What is DarkCyanogenMod?
DarkCyanogenMod is an aftermarket firmware based CyanogenMod project,has every features from CyanogenMod 11 plus:
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Known Issues
- Camcorder close after record but movie saves good
Installation
Download ROM and GApps
Put the files on SDCard
Reboot in Recovery
Wipe Data/Factory Reset
Format /System
Select "Install Zip from External Storage"
Choose dCM zip file
Choose GApps zip file
Reboot System
Download
Go to post #2
Google Apps available here
Source
Device tree & kernel: TeamCanjica GitHub
Credits
TeamCanjica
DarkCM team
@AntaresOne
XDA:DevDB Information
DarkCyanogenMod, ROM for the Samsung Galaxy S Advance I9070
Contributors
Bx16
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: 4.1.2
Based On: CM
Version Information
Status: Stable
Created 2014-10-05
Last Updated 2014-11-19
Should will working, if not just tell me
Link: http://d-h.st/IXk (build 1)
Link: http://d-h.st/AMd build 2, dCM 6.00
Link: http://d-h.st/LM5 build 3, dCM 7.00
Link: http://www.mediafire.com/download/k254yevga2fekqf/dcm_janice-19102014-bx16.zip build 4, hw keys fixed
Link: https://www.mediafire.com/?ounqky6zo1b3e8e v8.0
LAST FINAL BUILD v9.0:
https://www.androidfilehost.com/?fid=95784891001612033 PHILZ
https://www.androidfilehost.com/?fid=95784891001613228 CWM
Can you please make the background tiles full black? ( screnshot # 2) And also settings bar , and get rid of that glowing effect from volume slider? ( screenshot #5) In rest....... all we could really want from this beautiful rom is some stamped white icons Good Job This and Vanir rom deserves to be fully blacked out ( pre-themed)
@pictorul20 I can't edit rom and colors but you can try download black themes and apply it (rom support theme manager)
Good work,,
Downloading
Bx16 said:
@pictorul20 I can't edit rom and colors but you can try download black themes and apply it (rom support theme manager)
Click to expand...
Click to collapse
Ok thanks for the tip. and i like that there are people interested in the look of the phone interface . Much apreciated :highfive:
Another great ROM....thanks!
What toolchains are you using for this rom? Anyone tried this rom? How is the performance and battery backup?
@115dan:
GCC 4.8. Performance is like CM. You can overclock cpu and gpu if it's not satisfaction you.
Bx16 said:
@115dan:
GCC 4.8. Performance is like CM. You can overclock cpu and gpu if it's not satisfaction you.
Click to expand...
Click to collapse
Can you use Sabermod 4.8-4.9 for the next build? With that toolchain rom is a little more responsive.
@115dan: i will try build with 4.9 on this week.
Bx16 very very smooth, "customable" and stable ROM, congratulation! I love it!!! :laugh:
Thanks for the rom. One thing: it's possible to integrate "active notifications"?
@gianfrinico: i can't add/remove features. Darkcm Team can do it. I only compiled from sources to our device.
Sent from my GT-I9070 using XDA Free mobile app
Bx16 said:
@gianfrinico: i can't add/remove features. Darkcm Team can do it. I only compiled from sources to our device.
Sent from my GT-I9070 using XDA Free mobile app
Click to expand...
Click to collapse
Dark is a official ROM for Janice?
I find a little bug, MTP doesn't work
gianfrinico said:
Dark is a official ROM for Janice?
Click to expand...
Click to collapse
No, its unofficial build
johnny_cage said:
I find a little bug, MTP doesn't work
Click to expand...
Click to collapse
For me MTP work, maybe try off debugging on developers options
Hello... Is Apollo app also found in this ROM?
TPD-21 said:
Hello... Is Apollo app also found in this ROM?
Click to expand...
Click to collapse
Yes .... as you can see in the screenshots in op...
Sorry for my english...[emoji4] [emoji4]
tommi77 said:
Yes .... as you can see in the screenshots in op...
Sorry for my english...[emoji4] [emoji4]
Click to expand...
Click to collapse
Thanks for the answer. Btw I can not see the screenshot at all on the OP. Maybe the picture is formatted other than JPG or PNG I guess. (I just opened my laptop. Tonight I was able to see some of the sightings screenshot.) Therefore I have to ask it directly here. By the way thanks for the explanation.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
This Support of the CyanogenMod is Unofficial and the sources are up at http://github.com/androidarmv6
This is my rom for cooper.
For new features or bug ask me
PLEASE USE THE THANKS BUTTOM
Thread for Mini-Gapps
Mini-Gapps
This modded CM11
*Build with Linaro
*Build with Java 7
*Removed InputDevices
*Removed Theme Chooser
*Removed Theme Provider
*Removed Voice Dialer
*Removed BasicDreams
*Removed CellBroadcastReceiver
*Removed LiveWallpapers
*Removed LiveWallpapersPicker
*Removed PicoTTs
*Removed Provision
*Removed Stk
*Removed User Dictionary Provider
*Removed Whisper Push
*Disabled bootanimation in build.prop: debug.sf.nobootanimation=1
*Added build.prop tweaks
Changelog:
*(20150907) Added build.prop tweaks
*(20150911) Emoji Lollipop
*(20150911) Unworking Camera...
*(20150917) Fixed Camera
*(20151001) Updated version without Gapps
*(20151008) Removed Gapps
*(20151026) Kernel 3.0
*(20151026) Updated version with CronMod-INT2EXT4
Coming soon...
-CronMod-INT2EXT for more space, please see : http://forum.xda-developers.com/showthread.php?t=1716124
DOWNLOAD(If download section don't work)
MediaFire
If you want, you can donate me
XDA:DevDB Information
CyanogenMod 11, ROM for the Samsung Galaxy Ace S5830
Contributors
Desteroy
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 2.6.x
Based On: CyanogenMod
Version Information
Status: Stable
Created 2015-09-05
Last Updated 2015-10-26
Reserved
Sorry, wrong topic.
Bye!
! !
Excellent ROM! Very smooth! But camera still not working (Error : Can't connect to camera) . Fixed by flashing CM11 VideoRecordingPatch :victory: : http://forum.xda-developers.com/galaxy-ace/orig-development/patch-video-recording-fix-cm11-t2813168
Wifi is slow on Ace running KitKat . Can this be fixed?
But how the theme look like?
lee.wp14 said:
Excellent ROM! Very smooth! But camera still not working (Error : Can't connect to camera) . Fixed by flashing CM11 VideoRecordingPatch :victory: : http://forum.xda-developers.com/galaxy-ace/orig-development/patch-video-recording-fix-cm11-t2813168
Wifi is slow on Ace running KitKat . Can this be fixed?
Click to expand...
Click to collapse
Are you sure that you have installed this version? (20150912)
tank said:
Are you sure that you have installed this version? (20150912)
Click to expand...
Click to collapse
Yup, the one from here : http://www.mediafire.com/?1fbj8b88mtw28
Flashed using CWM 6.0.5.3
Same here, camera doesn't work unless I use the patch.
lee.wp14 said:
Yup, the one from here : http://www.mediafire.com/?1fbj8b88mtw28
Flashed using CWM 6.0.5.3
Click to expand...
Click to collapse
I'm sorry, i work for fix it
Mardon cm11
what is diferent to mardon release? thanks
graineeg said:
what is diferent to mardon release? thanks
Click to expand...
Click to collapse
I think that this build is based on cm11 cooper release (R13) from androidarmv6, if I'm not wrong.
Yes, Mardon's CM11 is heavily modded (Changed many stuff), but this ROM is much more lightweight than Mardon's. As you can see from the change log, OP removed some of the junk stuff that I will certainly remove from every CM11 build I've flashed. OP even add some tweaks in build.prop
And so, this CM11 is running smoothly with Google Play Services installed, unlike other CM11 builds. Others even get stuck when there's an incoming call with no GAPPS installed.
Love this CM11 very much, except the WiFi intermittent problem, seems like every cooper's CM11 build have this prob.
Note : New update (20150917) released! Under Downloads section.
Camera works!
Great ROM!
Edit : But camera touch focus not working
lee.wp14 said:
Camera works!
Great ROM!
Edit : But camera touch focus not working
Click to expand...
Click to collapse
The touch focus is not a problem, but it was disabled in the repo by armv6 team
I tried "INT2EXT" on a fresh install, it is not working now.
Would be very useful, thanks.
Is your plan to integrate this in the rom (1. post)?
maven33 said:
I tried "INT2EXT" on a fresh install, it is not working now.
Would be very useful, thanks.
Is your plan to integrate this in the rom (1. post)?
Click to expand...
Click to collapse
I want upload a version whit this script, because not all person use this script
disable or separate gapps
Hi, as I say in a Q&A cooper post, download link for the latest and the best cm11-*cooper*androidarmv6 rom is dead. I would like to switch to your Linaro rom, but I do not want to install Gapps.
armv6team provide gapps in a separate package. Is there a way for you to provide it in the same way ? I would like to install Linaro on my cooper, but I'm very very afraid about Gapps, so I cannot.
Thx for thinking about that.
this rom works on s5830c?
aster30 said:
Hi, as I say in a Q&A cooper post, download link for the latest and the best cm11-*cooper*androidarmv6 rom is dead. I would like to switch to your Linaro rom, but I do not want to install Gapps.
armv6team provide gapps in a separate package. Is there a way for you to provide it in the same way ? I would like to install Linaro on my cooper, but I'm very very afraid about Gapps, so I cannot.
Thx for thinking about that.
Click to expand...
Click to collapse
I can do this, but i want to include gapps in my rom
Tomorrow i upload a version without gapps
PresuntoVoadorBR said:
this rom works on s5830c?
Click to expand...
Click to collapse
No, don't works
Tomorrow i upload a version without gapps
Click to expand...
Click to collapse
yeah, you rocks I will try it directly, and make you feedbacks. thx.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AOKP-ANDROID OPEN KANG PROJECT
What is AOKP?
AOKP stands for Android Open Kang Project. It is a custom ROM distribution for several high-end Android devices. The name is a play on the word kang and AOSP (Android Open Source Project). The name was sort of a joke, but it just stuck, just like our infatuation with unicorns.
We fork the source code of Android that Google puts out in the open with every major version release, and we then add the magical unicorn bytes (read: we add some of the coolest features that are both useful and make your ROM awesome).
With AOKP, you can generally do a lot more with your device than what you could do with the original firmware that came installed on it.
Why AOKP ?
We were waiting for when you'd ask this.
There are a variety of reasons why a hilly billy Android user, on a bright sunny day, would suddenly start using AOKP and loving it.
For one, AOKP is lightweight. Most OEMs provide a heavy UI layer over Android and have loads of bloatware (i.e. apps that not everyone use every day, but you cannot remove because they're "baked in" by default). Since AOKP is built upon vanilla Android source, it has neither of the above.
Also AOKP has features that you will not find on your stock firmware. You can have a multitude of toggles to quickly flip a lot of your phone's settings right at your fingertips, or you can launch apps quickly from any screen using our Ribbons.
You can change almost each and every aspect of the OS, from its looks to the way it functions, with total freedom. And did we tell you, AOKP helps you make tacos?
Downloads
Download
Gapps
Instructions
Factory Reset/Wipe Data
Format System
Format Cache
Format Dalvik Cache
Install ROM
Install Gapps
Reboot
Source:
Kernel: https://github.com/CM-Tab-S/android_kernel_samsung_klimtwifi
Device Tree: https://github.com/CM-Tab-S/android_device_samsung_chagalllte
Credits:
@Barracuda77777 (For helping along the way)
@UpInTheAir for his kernel magic and misc fixes
@crpalmer (for picassowifi device and kernel gits - the base @Barracuda77777 and @nvertigo67 started of from)
@eousphoros (for his device git)
@nvertigo67 (for his work on chagallwifi)
@Nexorrr (for his work on chagalllte)[/QUOTE]
XDA:DevDB Information
[ROM][WIP][6.0.1] AOKP MM [04.04][UNOFFICIAL][klimtwifi][klimtlte], ROM for the Samsung Galaxy Tab S
Contributors
hiowa93
Source Code: https://github.com/AOKP
ROM OS Version: 6.0.x Marshmallow
Based On: AOKP
Version Information
Status: Alpha
Created 2016-03-04
Last Updated 2016-05-08
Reserved
Unique features:
Colortone Support in settings
Current bugs (Same as CM Version):
Google play movies does not work
The camera does not work
The fingerprint scanner is not fully working (So i disabled it in settings and elsewhere
Reserved
Wonderfull rom! Good work! Thanks.
Will try later nice work mate I really appreciate it
is this only for the 700 wifi or can the 705 also use it.
colint3 said:
is this only for the 700 wifi or can the 705 also use it.
Click to expand...
Click to collapse
For now only T700 , in the future for the other devices too
Installed today, used Benzo Gapps instead of OpenGapps though.
Installation and first reboot went flawless, freshly installed rom without anything installed yet runs smoothly.
Testing can start beginning with app installs
Thanks Hiowa
Download link doesnt go anywere
BraianV said:
Download link doesnt go anywere
Click to expand...
Click to collapse
you need to click on download in the site that opens, then AOPK, then klimtwifi (is the T700)
direct link: http://androidrom.de/download/AOKP/klimtwifi/
and T805
T805 not yet
Installed last night, installed xposed and restored my apps from my previous ROM, everything seems to be working nicely. Nice job!
Flashed works great so far
Battery drain fast
Camera work?
ward24 said:
Camera work?
Click to expand...
Click to collapse
No
So no need to flash SuperSU? It doesn't specify if ROM is pre-rooted but I assume it is.
Sent from my SM-T700 using Tapatalk
brycegreen said:
So no need to flash SuperSU? It doesn't specify if ROM is pre-rooted but I assume it is.
Sent from my SM-T700 using Tapatalk
Click to expand...
Click to collapse
It's pre-rooted
brycegreen said:
So no need to flash SuperSU? It doesn't specify if ROM is pre-rooted but I assume it is.
Sent from my SM-T700 using Tapatalk
Click to expand...
Click to collapse
I can't remember if it's enabled by default but if not you can turn on the CM-equivalent of SuperSU (Privacy Guard) via Developer Tools. I would imagine though you could flash/install SuperSU if you prefer that instead (I've done that on other devices but haven't felt the need on this device and ROM).
Can anyone report on BT audio? Skips on cm13 but not on the other MM ROM.