Related
Hi all, i flashed the galaxy s4 KitKat ROM from jamal (THIS IS THE ROM http://forum.xda-developers.com/showthread.php?t=2544474);
and now i want to return to the stock rom of the galaxy S4 but i dont know how to do.I tried to flash a stock rom with Odin but it didnt work and the Galaxy s4 at the start says "firmware upgrade encountered an issue. please select recovery mode in kies and try again".So i flash a stock recovery and now it works fine but i want to go back to the stock rom.Can someone make a guide or post a guide on how to do that??
Thanks and sorry for my very bad english but im italian!!
Noitast said:
Hi all, i flashed the galaxy s4 KitKat ROM from jamal (THIS IS THE ROM http://forum.xda-developers.com/showthread.php?t=2544474);
and now i want to return to the stock rom of the galaxy S4 but i dont know how to do.I tried to flash a stock rom with Odin but it didnt work and the Galaxy s4 at the start says "firmware upgrade encountered an issue. please select recovery mode in kies and try again".So i flash a stock recovery and now it works fine but i want to go back to the stock rom.Can someone make a guide or post a guide on how to do that??
Thanks and sorry for my very bad english but im italian!!
Click to expand...
Click to collapse
Follow the tutorial from here and download the firmware from here
repulsa said:
follow the tutorial from here and download the firmware from here
Click to expand...
Click to collapse
i tried this guide but i didn't work
what is android version?
try to flash Stock 4.4.2
RubbaBand said:
what is android version?
try to flash Stock 4.4.2
Click to expand...
Click to collapse
the version is android 4.4.2
Noitast said:
the version is android 4.4.2
Click to expand...
Click to collapse
What is the error that appears in ODIN? Attach one screenshot if is possible :highfive:
I have a similar question,
I have an S4 with OmegaRom, Knox has been tripped and I want to update and wipe clean to sell.
Do I need to flash the same rom that the Omega one was based upon? (I.E XXUFNC9) Or will any stock 4.4.2 rom work? As I'd like the use the latest BTU one, which is only XXUFNB8
Once I've flashed stock, I undersrtand the KNOX apps won't work again, but will the device still be updatable through OTA and KIES?
Thanks!
abcarter said:
I have a similar question,
I have an S4 with OmegaRom, Knox has been tripped and I want to update and wipe clean to sell.
Do I need to flash the same rom that the Omega one was based upon? (I.E XXUFNC9) Or will any stock 4.4.2 rom work? As I'd like the use the latest BTU one, which is only XXUFNB8
Once I've flashed stock, I undersrtand the KNOX apps won't work again, but will the device still be updatable through OTA and KIES?
Thanks!
Click to expand...
Click to collapse
1. You can't sell it "CLEAN" coz u tripped KNOX. This can't be reset.
2. You can flash the Stock Rom u want, always being android 4.4.2. I have KNOX: 0x1 and i use latest XXUFNB8 without any problem
3. Yes.
Joku1981 said:
1. You can't sell it "CLEAN" coz u tripped KNOX. This can't be reset.
2. You can flash the Stock Rom u want, always being android 4.4.2. I have KNOX: 0x1 and i use latest XXUFNB8 without any problem
3. Yes.
Click to expand...
Click to collapse
Thanks for the help.
Yeah I know, by clean I mean without my data, and stock rom.
Hi folks, I have recently updated my Note 3 SM-N9005 from Kitkat 4.4.2 to Lollipop using the BL, CSC, CP AND PIT Files. But I didnt like Lollipop, lots of bug like no NFC, alarm doesnt work with flip cover, gps issue, etc.. So flasked original firmware (O2 Germany) with odin 9 but no luck. After successful installation my Note 3 just stuck at Galaxy Note 3 screen. Even tried factory reset, wipe data not still stuck at the welcome screen. Is there a way to install kitkat original firmware?
You updated the bootloader so no. Just reflash the beta and wait for official update. Or you can try CM11
revert from android 5.0 to 4.4.2
Download this rom with 5 files with pit file and flash with odin, and do a wipe/factory reset before and after, then u can flash latest rom for your phone from sammobile.
http://forum.xda-developers.com/showthread.php?t=2550823&page=7
post 63
the pit file is for N9005 32GB
http://forum.xda-developers.com/galaxy-note-3/help/qa-n9005xxugbnl8-5-0-lollipop-rom-t2982320/page14
sokar_goauld said:
Download this rom with 5 files with pit file and flash with odin, and do a wipe/factory reset before and after, then u can flash latest rom for your phone from sammobile.
http://forum.xda-developers.com/showthread.php?t=2550823&page=7
post 63
the pit file is for N9005 32GB
http://forum.xda-developers.com/galaxy-note-3/help/qa-n9005xxugbnl8-5-0-lollipop-rom-t2982320/page14
Click to expand...
Click to collapse
I have tried these options but result is the same, Note 3 doesnt boot and stuck at the welcome screen. As Jack said, looks like I am stuck with lollipop beta for Note 3
sorry to hear that, when u flash the 4.4.2 back, u ticked re-partition and phone bootloader update?
sokar_goauld said:
sorry to hear that, when u flash the 4.4.2 back, u ticked re-partition and phone bootloader update?
Click to expand...
Click to collapse
Yes, I did that. Your UK firmware (UFNF4) and O2 Germany could install successfully but Note 3 wont boot. However,DBT firware couldnt install, odin gave error is initially installation process. Eventually I had to install leaked lollipop
ssn1978 said:
Yes, I did that. Your UK firmware (UFNF4) and O2 Germany could install successfully but Note 3 wont boot. However,DBT firware couldnt install, odin gave error is initially installation process. Eventually I had to install leaked lollipop
Click to expand...
Click to collapse
I think the .pit file for Lollipop makes the system partition smaller, so it's only normal that no KitKat can boot, as to why after flashing a KitKat .pit you can't boot up, I don't know. You could have booted up Lollipop without the .pit for it, you know, I didn't, and I can revert to a KitKat backup anytime without any issues.
But yeah, you might have to stay on Lollipop for a couple more weeks until we get an official update.
sirobelec said:
I think the .pit file for Lollipop makes the system partition smaller, so it's only normal that no KitKat can boot, as to why after flashing a KitKat .pit you can't boot up, I don't know. You could have booted up Lollipop without the .pit for it, you know, I didn't, and I can revert to a KitKat backup anytime without any issues.
But yeah, you might have to stay on Lollipop for a couple more weeks until we get an official update.
Click to expand...
Click to collapse
The pit file provided to revert is for 4.4.2 android .....
successfully rolled back to 4.4.2
sokar_goauld said:
The pit file provided to revert is for 4.4.2 android .....
Click to expand...
Click to collapse
Hi, is your issue resolved?
I'd like to tell that I have successfully rolled back to 4.4.2 GNG1 BTU ROM from the Leaked 5.0 ROM.
I had luckily backed up my original PIT file from 4.4.2 ROM before upgrade to Lollipop leak. As there were many bugs with the leak, i decided to restore a Nandroid backup of kitkat. But it failed miserably as all the apps started crashing. So I did a fresh flashing of 4.4.2 GNG1 BTU rom with my Backup PIT file. And now everything is working fine for me.
I have 32GB N9005 model. Let me know if you need the PIT file for the same.
It would be great if you can share the pit file with me. I desperately need to go back to 4.4.2. I too have 32 GB SM-N9005 model from O2 Germany
worked successfully for me
I had same issue when I was downgrading to 4.4.2 , but it worked for me :
1- install leaked Lollipop via pc odin ( no need pit file)
2- boot your phone up and if you see welcome screen it means you still are cool
3- download nad install 4.4.2 GNG1 via pc odin, and dont let it to boot up
4- go to stock recovery mode and wipe your phone
5- reboot your phone and hopefully you will be fine
ssn1978 said:
It would be great if you can share the pit file with me. I desperately need to go back to 4.4.2. I too have 32 GB SM-N9005 model from O2 Germany
Click to expand...
Click to collapse
On my first link i give you, u have the pit file for 4.4.2 and all the files u need to revert to 4.4.2, all u have to do is to download that rar and ur problem is solved.
So guys, I now able to downgrade to 4.4.2. As you have guys suggested, I used pit file sokar_goauld (32GB N9005) and used GNG1 BTU ROM, the way RedApple has suggested. Now everything is back to 4.4.2 though not the German O2 firmware.
Thank you guys!
I have one more question, can I now flash O2 Germany firmware on this GNG1 BTU ROM without any pit file? Seems like O2 Germany bootloader/firmware is an older version, so not sure if further downgrading to original O2 Germany firmware is possible without any issues?
Have a nice weekend.
ssn1978 said:
So guys, I now able to downgrade to 4.4.2. As you have guys suggested, I used pit file sokar_goauld (32GB N9005) and used GNG1 BTU ROM, the way RedApple has suggested. Now everything is back to 4.4.2 though not the German O2 firmware.
Thank you guys!
I have one more question, can I now flash O2 Germany firmware on this GNG1 BTU ROM without any pit file? Seems like O2 Germany bootloader/firmware is an older version, so not sure if further downgrading to original O2 Germany firmware is possible without any issues?
Have a nice weekend.
Click to expand...
Click to collapse
I am happy for u , and yes, u can flash now ur firmware without pit......u need to use pit only if u change android version, like KK to LL
LE - remember, always wipe clean/factory reset before changing firmware to avoid problems.
nagenderjeet said:
Hi, is your issue resolved?
I'd like to tell that I have successfully rolled back to 4.4.2 GNG1 BTU ROM from the Leaked 5.0 ROM.
I had luckily backed up my original PIT file from 4.4.2 ROM before upgrade to Lollipop leak. As there were many bugs with the leak, i decided to restore a Nandroid backup of kitkat. But it failed miserably as all the apps started crashing. So I did a fresh flashing of 4.4.2 GNG1 BTU rom with my Backup PIT file. And now everything is working fine for me.
I have 32GB N9005 model. Let me know if you need the PIT file for the same.
Click to expand...
Click to collapse
Worked exactly the way you suggested! Thank you.
ssn1978 said:
I have tried these options but result is the same, Note 3 doesnt boot and stuck at the welcome screen. As Jack said, looks like I am stuck with lollipop beta for Note 3
Click to expand...
Click to collapse
i think there is something wrong with flashing lollipop on your device. i already tried flashing lollipop and i downgrade it to kitkat successfully without error... many people say that its ok to downgrade from lollipop to kit kat... like me im on kitkat now because i dint like lollipop so many bugs. i will wait the official update..
That's good!
Now I'm eagerly waiting for the Official Lollipop
Thanks you Guys
I did as ssn1978 did with the suggested files from RedApple and sokar_goauld and i just wanted to say.....
Thank you guys, God bless you
I started losing hope going back to kitkat or even reviving my Note 3 back...
And now it's alive thanks to you
But i'm facing a problem now, i can't go back to my NF4 BTU, the same old problem happened again :S do i have to stuck with NG1 ? :S
Amir Adel said:
I did as ssn1978 did with the suggested files from RedApple and sokar_goauld and i just wanted to say.....
Thank you guys, God bless you
I started losing hope going back to kitkat or even reviving my Note 3 back...
And now it's alive thanks to you
But i'm facing a problem now, i can't go back to my NF4 BTU, the same old problem happened again :S do i have to stuck with NG1 ? :S
Click to expand...
Click to collapse
Downgrade from NG to NF is impossible or will cause many issues. ..so stay on NG...
rayman95 said:
Downgrade from NG to NF is impossible or will cause many issues. ..so stay on NG...
Click to expand...
Click to collapse
Oh. so It's downgrading! i thought NF4 is newer than NG1, in that case i'm satisified with NG1, device it working perfect now
can we downgrade safely 5.0.1 Lollipop to Kitkat 4.4.2 ???
model - S4 I9506 LTA
if any1 know it then plz share it step by setp....
bcoz i m noob and as far as i know that downgrading is very risky ?
edit
cant be bothered
DSA said:
edit
cant be bothered
Click to expand...
Click to collapse
please give me solution ??
Take a 4.4.2 package unpack it and remove bootloaders, then repack and test.
You can opposedly to SGY firmwares (s5360) open S4 firmwares with Winrar / 7-Zip.
Killnolife said:
Take a 4.4.2 package unpack it and remove bootloaders, then repack and test.
You can opposedly to SGY firmwares (s5360) open S4 firmwares with Winrar / 7-Zip.
Click to expand...
Click to collapse
Thanks for reply.... but it is safe to repack the firmware? and flash after repack?
sorry for ask but some users said there is IMEI null or wifi problem after downgrading? ? is it right?
I m little bit confused. ... if anything goes wrong... my mom kill me ; )
C00l.vishu.ar0ra said:
Thanks for reply.... but it is safe to repack the firmware? and flash after repack?
sorry for ask but some users said there is IMEI null or wifi problem after downgrading? ? is it right?
I m little bit confused. ... if anything goes wrong... my mom kill me ; )
Click to expand...
Click to collapse
User who say that are user who don't even care about their country code nor their CSC
If your CSC is XEF then you have to flash a non-knox 4.4.2 XEF ROM, if wifi/IMEI is null it's most likely a MODEM mismatch.
Just reflash the modem by using Odin3's CP section :good:
EDIT :
Or you may just try Mobile Odin Pro, for a buck it downgrades the phone a simple way.
imei null after downgrading to kitkat on GT-I9500
C00l.vishu.ar0ra said:
can we downgrade safely 5.0.1 Lollipop to Kitkat 4.4.2 ???
model - S4 I9506 LTA
if any1 know it then plz share it step by setp....
bcoz i m noob and as far as i know that downgrading is very risky ?
Click to expand...
Click to collapse
I first rooted and installed SUPERSU on my device with lollipop 5.0.1 to get x mode games. Since xmodgames doesn't support lollipop currently I decided to downgrade my Samsung GT-I9500 from lollipop 5.0.1 to Kit Kat via ODIN after doing a complete wipe via philz_touch_6.12.8-i9500.tar but after the install My mobile had null imei. I was able to successfully root the device and install SUPERSU and Xmodgames also worked fine but without any mobile network due to NULL Imei.
I tried all forums some had software to remove the null state and some had service code etc, but nothing worked and a techie told me that this can now be restored only through some box available only with professionals and asked me a very high fee almost 30% cost of the device.
I finally figured it out and restored my phone back to lollipop 5.0.1 after doing a wipe by PHILZ (without root selected) and my phone was back to its original state.
Hope this helps.
rschauhan said:
I first rooted and installed SUPERSU on my device with lollipop 5.0.1 to get x mode games. Since xmodgames doesn't support lollipop currently I decided to downgrade my Samsung GT-I9500 from lollipop 5.0.1 to Kit Kat via ODIN after doing a complete wipe via philz_touch_6.12.8-i9500.tar but after the install My mobile had null imei. I was able to successfully root the device and install SUPERSU and Xmodgames also worked fine but without any mobile network due to NULL Imei.
I tried all forums some had software to remove the null state and some had service code etc, but nothing worked and a techie told me that this can now be restored only through some box available only with professionals and asked me a very high fee almost 30% cost of the device.
I finally figured it out and restored my phone back to lollipop 5.0.1 after doing a wipe by PHILZ (without root selected) and my phone was back to its original state.
Hope this helps.
Click to expand...
Click to collapse
thnx for reply but as i said about downgrading lollipop to kitkat
i want kitkat back on my phone .. lollipop sucks... worst battery backup , working slow , no silent mode, no fully root , no xposed , no greenfy ( rooted) and many more :crying:
and plz some1 make a new thread for guide downgrading LP to KK step by step ....
The easy way:
1. Flash custom recovery
2. Flash custom 4.4.2
3. Amazing it works.
Killnolife said:
User who say that are user who don't even care about their country code nor their CSC
If your CSC is XEF then you have to flash a non-knox 4.4.2 XEF ROM, if wifi/IMEI is null it's most likely a MODEM mismatch.
Just reflash the modem by using Odin3's CP section :good:
EDIT :
Or you may just try Mobile Odin Pro, for a buck it downgrades the phone a simple way.
Click to expand...
Click to collapse
where to find MODEM and how to check that which modem file work for my device?
Lennyz1988 said:
The easy way:
1. Flash custom recovery
2. Flash custom 4.4.2
3. Amazing it works.
Click to expand...
Click to collapse
thnks .. is it safe ? i mean IMEI null or Wifi or any other issues comes after custom rom?
i am scare
C00l.vishu.ar0ra said:
thnks .. is it safe ? i mean IMEI null or Wifi or any other issues comes after custom rom?
i am scare
Click to expand...
Click to collapse
It's safe.
Lennyz1988 said:
It's safe.
Click to expand...
Click to collapse
ok let me try ... and i will tell u after this...
Here is alot reports of cf-autoroot and cwm/twrp rooting methods doesn't work in SM-N910F. Does anyone know what is going on? I believe new software update is problem(not 5.0.1).
They work fine. Have done for me at least.
i tried to root my stock n910f with kitkat.
apparently the cf-autoroot was for 5.01 lollipop, result.. a soft brick (it could be my usb cable to tough becouse it was broken and sometimes it disconnects the phone)
so after that i got a new cable and flashed the stock lollipop rom from sammobile.
now im running lollipop and i think i am goin to try root it today
if you look at chainfires page, the cf-autoroot file is for 5.01
Racinghart91 said:
i tried to root my stock n910f with kitkat.
apparently the cf-autoroot was for 5.01 lollipop, result.. a soft brick (it could be my usb cable to tough becouse it was broken and sometimes it disconnects the phone)
so after that i got a new cable and flashed the stock lollipop rom from sammobile.
now im running lollipop and i think i am goin to try root it today
if you look at chainfires page, the cf-autoroot file is for 5.01
Click to expand...
Click to collapse
Problem is not in 5.0.1. Only 4.4.4 after software update.
I used the cf auto root on my note 4 and it bricked
I used the cf auto root on my note 4 and it bricked how do I unbrick it?
joaokeeper said:
I used the cf auto root on my note 4 and it bricked how do I unbrick it?
Click to expand...
Click to collapse
here is what you do.
download your desired stock rom from www.sammobile.com
flash it with odin and you are ready to go ! you wont even lose data and apps
rs tony said:
Here is alot reports of cf-autoroot and cwm/twrp rooting methods doesn't work in SM-N910F. Does anyone know what is going on? I believe new software update is problem(not 5.0.1).
Click to expand...
Click to collapse
hi ,
i have a N910F currently on lollipop .software BOC3 rooted and custom recovery .
i have used the same CF autoroot / CWM versions for Android v4.4.4 ,Android v5.0.1 ........software .BOB4 and now on...... BOC3 ..no problems ,no issues .
to me it it very strange that it does not work ...?
willcor said:
hi ,
i have a N910F currently on lollipop .software BOC3 rooted and custom recovery .
i have used the same CF autoroot / CWM versions for Android v4.4.4 ,Android v5.0.1 ........software .BOB4 and now on...... BOC3 ..no problems ,no issues .
to me it it very strange that it does not work ...?
Click to expand...
Click to collapse
Yes.. u have used SAME FILE. File in cf paqe is updatet and works only in lollipop. Problem is here is not same old file like urs.
hi,
to clearify i used my copies of CF auto root and CWM recovery i kept on my laptop when i rooted first time on Android v4.4.4 (used it over and again) Did not download again.. If this explanation helps?
Plse note
Sorry but i struggling to follow your point ( post# eight ) . but i find above strange and interesting
Thanks
I have samsung Galaxy S4 ( I9500 )
i have installed cm-12.1-20160918-NIGHTLY-i9500.zip With philz_touch_6.48.4-i9500 and it worked Well but there was a problem i call I can't here or the other here me unless open speaker and close it again it works well .. then i got OTA update i started to download it with CMUpdater and download speed wasn't well i canceled the download and Downloaded ( cm-12.1-20161002-NIGHTLY-i9500.zip ) manually and Flash it with the same Recovery after this flash process my phone started normally but when i Lock the screen and try to wake it up again it won't wake up but the device still working :/ .. and other problem is Back, menu Keys didn't work any more After this flash .. and Recovery Won't Boot :/ tried to change ( CWM - Phliz ) it and nothing happen .. TWRP is the only recovery Work But other problem still .. and i flash Stock Rom With ODIN and Problems Still i flash Kit kat and Lolipop .. nothing help :"3 ..
any help ??
ahmed44251 said:
I have samsung Galaxy S4 ( I9500 )
i have installed cm-12.1-20160918-NIGHTLY-i9500.zip With philz_touch_6.48.4-i9500 and it worked Well but there was a problem i call I can't here or the other here me unless open speaker and close it again it works well .. then i got OTA update i started to download it with CMUpdater and download speed wasn't well i canceled the download and Downloaded ( cm-12.1-20161002-NIGHTLY-i9500.zip ) manually and Flash it with the same Recovery after this flash process my phone started normally but when i Lock the screen and try to wake it up again it won't wake up but the device still working :/ .. and other problem is Back, menu Keys didn't work any more After this flash .. and Recovery Won't Boot :/ tried to change ( CWM - Phliz ) it and nothing happen .. TWRP is the only recovery Work But other problem still .. and i flash Stock Rom With ODIN and Problems Still i flash Kit kat and Lolipop .. nothing help :"3 ..
any help ??
Click to expand...
Click to collapse
Get the i9500 lollipop firmware from the sammobile and flash it via odin. Please get the firmware which is the same or newer then your bootloader.
sway8966 said:
Get the i9500 lollipop firmware from the sammobile and flash it via odin. Please get the firmware which is the same or newer then your bootloader.
Click to expand...
Click to collapse
i flashed it several times before and worked well .. but now i don't know what's happening
sway8966 said:
Get the i9500 lollipop firmware from the sammobile and flash it via odin. Please get the firmware which is the same or newer then your bootloader.
Click to expand...
Click to collapse
tell me how to know My Device Bootloader
ahmed44251 said:
tell me how to know My Device Bootloader
Click to expand...
Click to collapse
Just install phone info app from play store
Arpit Aggarwal said:
Just install phone info app from play store
Click to expand...
Click to collapse
it said the same bootloader in version i flash .. can i know the original or some thing like this ?
ahmed44251 said:
it said the same bootloader in version i flash .. can i know the original or some thing like this ?
Click to expand...
Click to collapse
When I was in kitkat I did not check the bootloader version and flashed older version which tripped the knox counter. That was why I I asked you to check the bootloader .
If you flashed the correct firmware via odin, believe that the firmware download has no problem, and flashing odin did not give any errors and yet you still have some problem, then your problem likely to be a hardware failure rather than software.
check the checksum of the downloaded firmware, flashing from different usb port or different computer, flashing with different version of odin, etc.. are the tries you can do.
sway8966 said:
When I was in kitkat I did not check the bootloader version and flashed older version which tripped the knox counter. That was why I I asked you to check the bootloader .
If you flashed the correct firmware via odin, believe that the firmware download has no problem, and flashing odin did not give any errors and yet you still have some problem, then your problem likely to be a hardware failure rather than software.
check the checksum of the downloaded firmware, flashing from different usb port or different computer, flashing with different version of odin, etc.. are the tries you can do.
Click to expand...
Click to collapse
i'll try
i downloaded Jelly bean, Kitkat and i'll flash each
Nothing Worked it still same things
ahmed44251 said:
i'll try
i downloaded Jelly bean, Kitkat and i'll flash each
Click to expand...
Click to collapse
Could you tell me your bootloader version of your phone and also give me the link of the lollipop firmware that you downloaded from the sammobile.
if it is possible could you tell me what message you have when you flash that lollipop firmware via odin.
If your phone is on lollipop, flashing kit-kat or jelly beam wont help and it could harm your phone.
sway8966 said:
Could you tell me your bootloader version of your phone and also give me the link of the lollipop firmware that you downloaded from the sammobile.
if it is possible could you tell me what message you have when you flash that lollipop firmware via odin.
If your phone is on lollipop, flashing kit-kat or jelly beam wont help and it could harm your phone.
Click to expand...
Click to collapse
bootloader Version : I9500XXUHPH3
Frimware link : http://www.sammobile.com/firmwares/download/93065/I9500XXUHPH3_I9500SERHPH1_SER/
Odin didn't Gave me any Error Messages .. it work Like charm
Kitkat Solve Original Recovery Problem .. and two other problems still ...but lollipop all 3 still
Could 4Files Firmware Help ??
ahmed44251 said:
bootloader Version : I9500XXUHPH3
Frimware link : http://www.sammobile.com/firmwares/download/93065/I9500XXUHPH3_I9500SERHPH1_SER/
Odin didn't Gave me any Error Messages .. it work Like charm
Kitkat Solve Original Recovery Problem .. and two other problems still ...but lollipop all 3 still
Click to expand...
Click to collapse
Well ph1/ph3 is the latest firmware for i9500 . It was released a week ago. It is for Russia. I am using the firmware released in 2015. Try to download it again and flash it.
4 files Frimware and I9500XXUHPH3 Didn't help :/
this maybe Hardware problem (board .. )