Guys, everytime I flashed an AOSP based Rom like Carbon on my hltexx, nobody can call me and I also can't call someone else. If I dial a number, the connection seems to break instantly but my mom told me, she got my calls but didn't hear anything. I'm also unable to change or view the access points.
Stock based Roms like Omega work correctly.
WTF am I doing wrong? :crying:
Additional Infos:
>SMS and Internet work.
>3G because my provider (Drei, Austria) is retarded.
>Android 4.4.2
>restoring an old EFS backup didn't solve the problem
>APN seems to be correct
Have you tried a custom kernel like temaseks kernel?
Sent from my SM-N9005 beast of a phone.
Sammath said:
Have you tried a custom kernel like temaseks kernel?
Click to expand...
Click to collapse
Not yet. I'll flash CM now and try a few kernels and will post the results later.
Btw here is one with the same problem.
I tried some kernels for hltexx, but everything I got was bootloops or a starting system with the same problem ;_;
Have you ever Flashed a newer rom(Sammy official) or updated your modem firmware?
Sent from my SM-N9005 beast of a phone.
Sammath said:
Have you ever Flashed a newer rom(Sammy official) or updated your modem firmware?
Sent from my SM-N9005 beast of a phone.
Click to expand...
Click to collapse
Yes, I updated from 4.3 to 4.4.2 via odin and used the stock images for my provider. Everything worked as it should, only aosp roms had problems.
A few days ago I installed PAC again after flashing the newest stock .tar.md5 and tried the whole evening many different configurations in apn and other connection related settings. Nothing worked and i restored them all. On the next day I got a call. I couldn't explain it, but i was able to start phone calls too. With just one problem: When I call someone I lose the control over the whole Touchscreen and the buttons, so the only way to end a conversation is a hard reset via holding the power button.
I'm not sure, but I have the theory that the RIL file isn't compatible to the modem. Where can I find some RILs?
Another strange fact is, that everytime I flashed an AOSP, i formated the device via TWRP to erase all the bloatware and then made a full wipe. But last week I forgot to format the storage. Guys, was I really everytime this stupid and simply wiped the RIL partition away?
Model number?
Firmware you have upgraded to (4.4.2)?
Tried changing recovery, Wipe System, wipe cache, data, then flash the ROM fresh. boot into it, head to Settings > about and check if you have lost Baseband and/or Serial Number/IMEI - then we'll figure it out for you
radicalisto said:
Model number?
Firmware you have upgraded to (4.4.2)?
Tried changing recovery, Wipe System, wipe cache, data, then flash the ROM fresh. boot into it, head to Settings > about and check if you have lost Baseband and/or Serial Number/IMEI - then we'll figure it out for you
Click to expand...
Click to collapse
Sorry for answering so late. Changing every password after heartbleed took much time.
My model number is SM-9005
Even with a CWM based recovery and after a wipe with a complete reinstall I get the same problem.
IMEI and Baseband (N9005XXUENB1) are still here.
Hi All,
I just got a new used Samsung Galaxy S4 on Sprint and brought it over to Ting (way, way, way cheaper). I got everything working with the stock ROM, including GPS, but I wanted to install Cyanogenmod, so I rooted it, flashed TWRP 7.8, and flashed the latest Cyanogenmod (snapshot M12), with Gapps, and a zip file with the Ting data XML files to get 3G and LTE working.
Everything seemed to work great, but then while driving I noticed that the GPS just did not get a lock. After trying for an hour, it still had nothing. I installed GPS Status and saw that it had no satellites. Clearing the GPS cache and re-downloading data with that app did not solve the problem. I tried GPS Doctor without success and the GPS fix equally without success.
I rebooted, then factory reset, then erased everything and flashed the latest CM nightly, all with no success.
I found some similar problems online at these places:
http://myblog-online.co.uk/2013/12/the-continuing-saga-of-my-galaxy-s4-custom-roms/
http://forum.cyanogenmod.org/topic/98811-gps-not-working-23rd-nightly/
http://forum.xda-developers.com/showthread.php?t=2172670
These are all old and none gave me anything that useful. Is it a GPS radio issue? Is there anything I can do?
I also just found this page: http://wiki.cyanogenmod.org/w/Known_Issues_page_for_d2lte, but it is for the S3, not sure what to make of it.
I made a nandroid backup of my stock rom, but then I copied it to my computer, and when I copied it back again it didn't work. TWRP failed to restore with the error "No partition selected for restore".
My plan now is to flash the stock rom with odin, confirm that GPS works there, and then try again, but this is becoming a huge time sink and I have a lot of other things to do.
Does anyone have any ideas how I can fix this? I am pretty sure it isn't a hardware issue.
MikeDacre said:
Hi All,
I just got a new used Samsung Galaxy S4 on Sprint and brought it over to Ting (way, way, way cheaper). I got everything working with the stock ROM, including GPS, but I wanted to install Cyanogenmod, so I rooted it, flashed TWRP 7.8, and flashed the latest Cyanogenmod (snapshot M12), with Gapps, and a zip file with the Ting data XML files to get 3G and LTE working.
Everything seemed to work great, but then while driving I noticed that the GPS just did not get a lock. After trying for an hour, it still had nothing. I installed GPS Status and saw that it had no satellites. Clearing the GPS cache and re-downloading data with that app did not solve the problem. I tried GPS Doctor without success and the GPS fix equally without success.
I rebooted, then factory reset, then erased everything and flashed the latest CM nightly, all with no success.
I found some similar problems online at these places:
http://myblog-online.co.uk/2013/12/the-continuing-saga-of-my-galaxy-s4-custom-roms/
http://forum.cyanogenmod.org/topic/98811-gps-not-working-23rd-nightly/
http://forum.xda-developers.com/showthread.php?t=2172670
These are all old and none gave me anything that useful. Is it a GPS radio issue? Is there anything I can do?
I also just found this page: http://wiki.cyanogenmod.org/w/Known_Issues_page_for_d2lte, but it is for the S3, not sure what to make of it.
I made a nandroid backup of my stock rom, but then I copied it to my computer, and when I copied it back again it didn't work. TWRP failed to restore with the error "No partition selected for restore".
My plan now is to flash the stock rom with odin, confirm that GPS works there, and then try again, but this is becoming a huge time sink and I have a lot of other things to do.
Does anyone have any ideas how I can fix this? I am pretty sure it isn't a hardware issue.
Click to expand...
Click to collapse
That's is pretty much what you have to do. Its go back to stock and get a lock there in maps. When you have a lock just go back to recovery and flash your custom ROM of choice. That is pretty much the only fix.
Sent from my GT-I9505G using XDA Free mobile app
ROMANTiC KiD said:
That's is pretty much what you have to do. Its go back to stock and get a lock there in maps. When you have a lock just go back to recovery and flash your custom ROM of choice. That is pretty much the only fix.
Sent from my GT-I9505G using XDA Free mobile app
Click to expand...
Click to collapse
Thanks ROMANTiC KiD,
Good to know that I am heading down the right path before I spend a lot of time on this.
Should I not erase everything when I flash the custom ROM? I am pretty sure last time I used TWRP advanced erase to clear everything on the phone before installing. Should I just do a regular factory reset in TWRP to install CM in order to keep GPS functionality?
Thanks!
MikeDacre said:
Thanks ROMANTiC KiD,
Good to know that I am heading down the right path before I spend a lot of time on this.
Should I not erase everything when I flash the custom ROM? I am pretty sure last time I used TWRP advanced erase to clear everything on the phone before installing. Should I just do a regular factory reset in TWRP to install CM in order to keep GPS functionality?
Thanks!
Click to expand...
Click to collapse
Yes sir you can factory reset in twrp just remember to back up your files first! And you should still retain GPS lock.
Sent from my GT-I9505G using XDA Free mobile app
ROMANTiC KiD said:
Yes sir you can factory reset in twrp just remember to back up your files first! And you should still retain GPS lock.
Sent from my GT-I9505G using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the confirmation. I did exactly that and I can confirm that it did indeed work.
Thanks so much for the help.
Hi all,
Sorry to resurrect an old thread, but I am having this issue and the stock firmware flash isn't solving the issue. It is all very odd because it doesn't actually retain any kind of lock after flashing. I'm following instruction on here, but after locking gps on stock, then going to CM I cannot get a fix. It either had a massive radius on Maps, or it just locks to my home or work location.
Since trying much more I have managed to get the occasional satellite lock via GPS Locker, but even then as soon as I move from either my house or work, it can't find anything to lock onto and just defaults to a static location.
Is there anything you would recommend? I have 2 Samsung GS4's and they both exhibit the same problem. I have also tried this on an S4 Mini, but that retained lock just fine. I'm really confused as to what to actually try. If you could recommend anything I'd be very grateful.
Again, I'm sorry to res an old thread, but no one has been replying to the one I started for this issue :/
Your problem may be that there is some new issue with the newer firmware. I had success by first flashing the *old* firmware (you can download it from my dropbox here: https://www.dropbox.com/s/o3f3ynyezyy4yw9/L720VPUFNAE_L720SPTFNAE_L720VPUFNAE_HOME.tar.md5?dl=0) and then upgrading to the second to last firmware update for the GS4: which gives you Android 5 but without fixing the MMS bug.
After that I flash TWRP with Odin, and then do a full erase in TWRP followed by flashing the latest CM. That series of steps works for me every time, although I found that large changes to my physical location (e.g. flying to England from California) cause it to break again. I actually had to sit in a cafe in an English airport with my laptop out flashing my phone back to stock just so that I could use Google maps to get to my mother's house. It was pretty ridiculous. Because of that and other issues, I now just use stock. I hate it, but I do it anyway. Good luck.
Hi I got problems with my lux on every cm based rom. On every cm rom I get no reception of my carrier. I don't know if it's a device tree issue or just apn trouble. Since there are no aosp roms, I'm a little hung up. Stock rom works fine. I own the xt1562 operating on German carrier o2. Sometimes I get a few seconds of reception on cm roms, but it's leading just to no signal after a few seconds again. I nearly tired everything, flashed a different firmware etc. When I've flashed a rom I get the information that no sim card was found. After I restart the device he's asking for a pin. Also tried another sim card with the same result. Really could need some help.
flash the original fimrware from ur carrier or region
flash twrp
install cm and see if works
if not,flash only the radio modem from original firmware
Already did. Didn't work. Flashed the new cm12.1 from h2o64. This one is working.
I have the exact same problem with my XT1562 I bought from Germany through Moto Maker.
I installed h2o64's CM build from 10-10 after a full wipe (everything except internal data), and never got any proper signal. I tried squid2's CM build 10-12 as well, to no avail. Installing the XT1562 EU stock firmware following the linked explanation in the stock firmwares thread I had good, working signal, but then installing h2o64's CM build 10-14 with a factory reset rather than a full wipe resulted in the same issues described in this thread again.
I've read about these issues in different threads, mostly resolved somehow by installing the stock firmware, sometimes by selecting LTE as the preferred network type. I've tried these suggestions, but haven't had any success, and I don't know how to proceed.
Did I install the right stock firmware? (I would think so as it worked while it was installed.)
Did I forget to do something (like wipe, fix permissions, reboot the phone three times, howl at the moon,...)?
I use OpenGApps rather than tkruzze's since they're available in x64 as well so I can use them on all my devices. But that surely can't be it?
I'm at a complete loss at the moment, which is rather frustrating. Can anyone provide any help?
Gesendet von meinem Nexus 9 mit Hilfe von XDA Forums Pro.
I managed to install h2o64's CM build 10-14 and getting proper signal now.
I flashed the RETASIA firmware from XMoDuLeSx's Official stock firmwares added for xt1562,xt1563 thread following the instructions linked in the first post, and then after a wipe of system, data, cache, dalvik-cache I installed [ROM][lux][5.1.1] Cyanogenmod 12.1 - 2015-10-14 [UNIFIED].
Keep in mind that I have ordered my Moto X Play from Germany, so it shouldn't require a RETASIA firmware. I'm not advising to install this, as it was nothing but a shot in the dark that surprisingly didn't brick my phone. Still, I wanted to share that I got it working after all, simply to follow up my previous post properly. Should the signal break again, I'll update this thread; if I haven't, assume that it's still working.
Either way, though: If you decide to go down this road and install a firmware that isn't right for your phone and brick it, don't come to me. I'm advising against doing this.
Seems i'm having the same issue...
I did all the wipes and clean installs but I can't connect to my carrier.
Although my phone only supports one sim card, settings shows two. The first one is the one i'm using and it is displayed correctly. The quick settings tile though tells me that there is no sim card inserted.
I came from stock, unlocked, flashed TWRP from squid2's kernel page, rooted, flashed CM(squid2), kernel(squid2) and OpenGApps.
Did I do something wrong?
Is there any news on how to fix this problem or do I have to try again and again an hope to hit the spot?
Mafaldine said:
Seems i'm having the same issue...
I did all the wipes and clean installs but I can't connect to my carrier.
Although my phone only supports one sim card, settings shows two. The first one is the one i'm using and it is displayed correctly. The quick settings tile though tells me that there is no sim card inserted.
I came from stock, unlocked, flashed TWRP from squid2's kernel page, rooted, flashed CM(squid2), kernel(squid2) and OpenGApps.
Did I do something wrong?
Is there any news on how to fix this problem or do I have to try again and again an hope to hit the spot?
Click to expand...
Click to collapse
You need two more posts before you can post this in the CM thread from squid2. Squid2 is always fast with bugfixes. So make 2 other post and then explain your problem to him.
Lennyz1988 said:
You need two more posts before you can post this in the CM thread from squid2. Squid2 is always fast with bugfixes. So make 2 other post and then explain your problem to him.
Click to expand...
Click to collapse
Thanks for your reply!
I will do that
Meanwhile I managed to get a connection to my carrier by flashing h2o64's CM build 10-14 and then squid2's on top without wiping anything...
RR Lux 5.5.8 didn't work Wifi, after 2 clean instalation, wifi turn on and off then
https://youtu.be/xQdkQqAMdj0
New video mac 02:00:00:00:00:00
Solutions?
4Bismuth said:
https://youtu.be/xQdkQqAMdj0
New video mac 02:00:00:00:00:00
Solutions?
Click to expand...
Click to collapse
thats just what the custom rom shows. thats how it is for my on lineage. the system and apps know and use the real mac.
you can use change my mac to spoof a new one if it bothers you. but you shouldnt have any problems.
all my wifi and bluetooth connections work without problems.
4Bismuth said:
https://youtu.be/xQdkQqAMdj0
New video mac 02:00:00:00:00:00
Solutions?
Click to expand...
Click to collapse
Try resetting your network or just wipe your device and do a clean install. I have used every rom available for the Leeco Pro 3 and have never encountered this issue.
Kennii said:
thats just what the custom rom shows. thats how it is for my on lineage. the system and apps know and use the real mac.
you can use change my mac to spoof a new one if it bothers you. but you shouldnt have any problems.
all my wifi and bluetooth connections work without problems.
Click to expand...
Click to collapse
Ok, So the 02:00:00:00:00:00 mac is not a problem?
tsongming said:
Try resetting your network or just wipe your device and do a clean install. I have used every rom available for the Leeco Pro 3 and have never encountered this issue.
Click to expand...
Click to collapse
I already made all the wipes, factory reset, network reset ...
I think it's a problem with the internal folders as I restore the folders'
4Bismuth said:
Ok, So the 02:00:00:00:00:00 mac is not a problem?
I already made all the wipes, factory reset, network reset ...
I think it's a problem with the internal folders as I restore the folders'
Click to expand...
Click to collapse
What internal folders? If you do the full wipe, including formatting storage there aren't any internal folders that would have access to that would cause this kind of problem. Beware, do not format your internal storage unless you have a permanent Twrp Recovery partition. As long as you have the recovery partition there is no danger with formatting your storage.
What you are describing is related to your device ID. Are you also experiencing sim card, or bluetooth issues?
Have you flashed various basebands, chinese roms etc?
It sounds as if your EFS is possibly corrupted. If that is in fact the case you should take a look at this guide: https://forum.xda-developers.com/le-pro3/how-to/guide-how-to-downgrade-jui-restore-bands-t3622639
Another possible scenario is the issue stems from a corrupted installation of adb, Mac spoofing, or local network issues due to an improper static ip configuration, which can definitely result in duplicate MAC addresses on your network.
Source: https://android.izzysoft.de/articles/named/identifiers-1?lang=en
MAC: The MAC-Address identifies the corresponding network interface. Hence it is globally unique (aside maybe from some „Fakes“ and „NoName replicas“). WiFi and Bluetooth have each their own MAC address. Starting with Android-6, only system apps have access to it, all other apps just receive the default value "02:00:00:00:00:00"2; on older Android versions the permission ACCESS_NETWORK_STATE, ACCESS_WIFI_STATE resp. BLUETOOTH is required to access it (requested by ca. 70%, 30% resp. 10% of all apps).3
Click to expand...
Click to collapse
Follow any of the steps mentioned above, at your own discretion.
tsongming said:
What internal folders? If you do the full wipe, including formatting storage there aren't any internal folders that would have access to that would cause this kind of problem. Beware, do not format your internal storage unless you have a permanent Twrp Recovery partition. As long as you have the recovery partition there is no danger with formatting your storage.
What you are describing is related to your device ID. Are you also experiencing sim card, or bluetooth issues?
Have you flashed various basebands, chinese roms etc?
It sounds as if your EFS is possibly corrupted. If that is in fact the case you should take a look at this guide: https://forum.xda-developers.com/le-pro3/how-to/guide-how-to-downgrade-jui-restore-bands-t3622639
Another possible scenario is the issue stems from a corrupted installation of adb, Mac spoofing, or local network issues due to an improper static ip configuration, which can definitely result in duplicate MAC addresses on your network.
Source: https://android.izzysoft.de/articles/named/identifiers-1?lang=en
Follow any of the steps mentioned above, at your own discretion.
Click to expand...
Click to collapse
Ty, I will try it, if I have problems with the bluetooth as you can see in the video.
Gracias mi amigo
"Push The rom with mtp and install it."
how to push the rom with mtp?
I pass it by normal USB to the phone and already or it does not work?
-What you are describing is related to your device ID. Are you also experiencing sim card, or bluetooth issues?
Only wifi and bluetooth issues.
Have you flashed various basebands, chinese roms etc?
Only i flashed is TWRP and AICP 8.1 and nothing more.
It sounds as if your EFS is possibly corrupted. If that is in fact the case you should take a look at this guide:
I dont have EFS partition, i cant found this partition with root explorer.
4Bismuth said:
-What you are describing is related to your device ID. Are you also experiencing sim card, or bluetooth issues?
Only wifi and bluetooth issues.
Have you flashed various basebands, chinese roms etc?
Only i flashed is TWRP and AICP 8.1 and nothing more.
It sounds as if your EFS is possibly corrupted. If that is in fact the case you should take a look at this guide:
I dont have EFS partition, i cant found this partition with root explorer.
Click to expand...
Click to collapse
Your EFS partition is hidden, you would not see it with root explorer. I will not be able to check back to see you answer until later tonight.
(approximately 7 to 8 hours from now)
You have an X720?
So you were on stock EUI and then went straight to a custom rom?
You have flashed, AICP, and Twrp and Gapps right? Which version of Twrp?
How long have you owned the phone?
Have you tried simply resetting the phone?
I can suggest a few things, So lets start with the basics, in my experience it's usually something simple that causes a big issue.
Potential Solution
Go here and download file: http://www.teamsuperluminal.org/wp-content/uploads/2016/12/le_zl1_x720_mod.zip
Boot into Twrp and flash reboot,
Let me know if this resolves the issue.
tsongming said:
Your EFS partition is hidden, you would not see it with root explorer. I will not be able to check back to see you answer until later tonight.
(approximately 7 to 8 hours from now)
You have an X720?
So you were on stock EUI and then went straight to a custom rom?
You have flashed, AICP, and Twrp and Gapps right? Which version of Twrp?
How long have you owned the phone?
Have you tried simply resetting the phone?
I can suggest a few things, So lets start with the basics, in my experience it's usually something simple that causes a big issue.
Potential Solution
Go here and download file: http://www.teamsuperluminal.org/wp-content/uploads/2016/12/le_zl1_x720_mod.zip
Boot into Twrp and flash reboot,
Let me know if this resolves the issue.
Click to expand...
Click to collapse
You have an X720?
Yes, with 23s stock bought in Banggood.
So you were on stock EUI and then went straight to a custom rom?
First the WiFi stopped working and the phone restarted. And he fixed it by restarting the phone. Then I tried to reset the factory and the phone was fixed but then it failed again and finally I changed the ROM, it lasted a day and it failed again. And now I'm like the video without bluetooth or wifi.
You have flashed, AICP, and Twrp and Gapps right? Which version of Twrp?
This TWRP 3.0.2-v4 para LePro3 X720 unofficial de YDDS
What version of TWRP is the better?
How long have you owned the phone?
Like 4-5 month
Have you tried simply resetting the phone?
Yes, factory reset, all wipes, format data, reseting network, apps etc.
My phone is creating logs....
[1922:F :HDD] hdd_driver_init: WLAN Driver Initialization failed
<3>[ 45.130417][01-03_01:30:44 UTC] [WiFi-0x2304]wlan: driver load failure
<36>[ 48.758557
this is repeating in the log file...
4Bismuth said:
You have an X720?
Yes, with 23s stock bought in Banggood.
So you were on stock EUI and then went straight to a custom rom?
First the WiFi stopped working and the phone restarted. And he fixed it by restarting the phone. Then I tried to reset the factory and the phone was fixed but then it failed again and finally I changed the ROM, it lasted a day and it failed again. And now I'm like the video without bluetooth or wifi.
You have flashed, AICP, and Twrp and Gapps right? Which version of Twrp?
This TWRP 3.0.2-v4 para LePro3 X720 unofficial de YDDS
What version of TWRP is the better?
How long have you owned the phone?
Like 4-5 month
Have you tried simply resetting the phone?
Yes, factory reset, all wipes, format data, reseting network, apps etc.
My phone is creating logs....
[1922:F :HDD] hdd_driver_init: WLAN Driver Initialization failed
<3>[ 45.130417][01-03_01:30:44 UTC] [WiFi-0x2304]wlan: driver load failure
<36>[ 48.758557
this is repeating in the log file...
Click to expand...
Click to collapse
There truly is no reason why that files shouldn't load, try it again and immediately afterwards create a log report and upload it. I would bet you have a permissions issue., or a possible hardware issue> more likely permissions.
First, you need this version of Twrp:
PHP:
https://twrp.me/leeco/leecolepro3.html
" Download Links"
You can update Twrp with in twrp - choose to instal from image if you downloaded an .img file or as you know Zip its .zip
Have you reflashed Magisk?
You should do that first, to ensure that your issue is not permissions related?
Next, reflash the file from the last post, if it fails get the log file.
Do you have a recent full backup? If not try to create a full backup.
With your issue, Titanium backup would be great, this way if the issue persists, you will have a way to restore your apps and cloud based data.
Ideally, you need to do a full wipe. With the correct newest version of Twrp, ( linked above)
Newest official Gapps: 8.1 arm64 is now available:
PHP:
http://opengapps.org/
Newest version Rom of choice ( Lineage, AICP, Pixel, AOSIP)
As of Mar 1, 8:20 pm EST :Lineage is the most up to date. But all of the recent versions of 8.1 are great.
Hopefully this helps. If not, it's definitely a hardware or EFS issue.
EFS issues can sometimes repaired with Qfil. Personally, I save myself the hassle of uncertainty and contact Bangood for a warranty repair or replacement.
tsongming said:
There truly is no reason why that files shouldn't load, try it again and immediately afterwards create a log report and upload it. I would bet you have a permissions issue., or a possible hardware issue> more likely permissions.
First, you need this version of Twrp:
PHP:
https://twrp.me/leeco/leecolepro3.html
" Download Links"
You can update Twrp with in twrp - choose to instal from image if you downloaded an .img file or as you know Zip its .zip
Have you reflashed Magisk?
You should do that first, to ensure that your issue is not permissions related?
Next, reflash the file from the last post, if it fails get the log file.
Do you have a recent full backup? If not try to create a full backup.
With your issue, Titanium backup would be great, this way if the issue persists, you will have a way to restore your apps and cloud based data.
Ideally, you need to do a full wipe. With the correct newest version of Twrp, ( linked above)
Newest official Gapps: 8.1 arm64 is now available:
PHP:
http://opengapps.org/
Newest version Rom of choice ( Lineage, AICP, Pixel, AOSIP)
As of Mar 1, 8:20 pm EST :Lineage is the most up to date. But all of the recent versions of 8.1 are great.
Hopefully this helps. If not, it's definitely a hardware or EFS issue.
EFS issues can sometimes repaired with Qfil. Personally, I save myself the hassle of uncertainty and contact Bangood for a warranty repair or replacement.
Click to expand...
Click to collapse
Hi, I have already installed the new version of twrp, I have also made all the wipes, new rom of AICP, etc. I just deleted superSu and I installed magisk.
I have made a log with twrp and I get several errors.
4Bismuth said:
Hi, I have already installed the new version of twrp, I have also made all the wipes, new rom of AICP, etc. I just deleted superSu and I installed magisk.
I have made a log with twrp and I get several errors.
Click to expand...
Click to collapse
I just reviewed your post history and I see alot of good advice was given.
I assume you followed all advice.
I was not aware that you started having this issue originally on the stock rom???
The problem persist after stock reset and resetting your home network.
Before seeing your history, I was going to suggest that you attempt to return to stock. But, it seems that you have already tried that as well as attempted using Qfil.
The only other thing that I see from your logs that shows that the SELinux protection turned off, and that you are getting few kernel errors.
The answer is simple return the phone to Bangood for a replacement under warranty the phone has a hardware that it was likely caused by a faulty charger or usb cable.
tsongming said:
I just reviewed your post history and I see alot of good advice was given.
I assume you followed all advice.
I was not aware that you started having this issue originally on the stock rom???
The problem persist after stock reset and resetting your home network.
Before seeing your history, I was going to suggest that you attempt to return to stock. But, it seems that you have already tried that as well as attempted using Qfil.
The only other thing that I see from your logs that shows that the SELinux protection turned off, and that you are getting few kernel errors.
The answer is simple return the phone to Bangood for a replacement under warranty the phone has a hardware that it was likely caused by a faulty charger or usb cable.
Click to expand...
Click to collapse
I was not aware that you started having this issue originally on the stock rom???
Yes
The problem persist after stock reset and resetting your home network.
yes
Before seeing your history, I was going to suggest that you attempt to return to stock. But, it seems that you have already tried that as well as attempted using Qfil.
I'm going to try this, link?
The only other thing that I see from your logs that shows that the SELinux protection turned off, and that you are getting few kernel errors.
:/ i have another log with the wifi errors
tsongming said:
I just reviewed your post history and I see alot of good advice was given.
I assume you followed all advice.
I was not aware that you started having this issue originally on the stock rom???
The problem persist after stock reset and resetting your home network.
Before seeing your history, I was going to suggest that you attempt to return to stock. But, it seems that you have already tried that as well as attempted using Qfil.
The only other thing that I see from your logs that shows that the SELinux protection turned off, and that you are getting few kernel errors.
The answer is simple return the phone to Bangood for a replacement under warranty the phone has a hardware that it was likely caused by a faulty charger or usb cable.
Click to expand...
Click to collapse
Hi, I've tried using Qfil.
And when I use the phone, I get the red frames.
And my mac and bluetooth adress is unavaible :/
4Bismuth said:
Hi, I've tried using Qfil.
And when I use the phone, I get the red frames.
And my mac and bluetooth adress is unavaible :/
Click to expand...
Click to collapse
Other than what we have discussed. It seems to me that you have a hardware issue which if is the case you need to return it under warranty. Perhaps a component was not soldered well and it needs repair.
If you have owned the device for less than a year you should still be under warranty. If not maybe find a shop in your local area.
Worst case, the people at this link had some crazy ideas to resolve the same issue on another phone. If you are bold and desperate go take a look : https://forum.xda-developers.com/general/help/qa-wifi-stuck-mac-020000000000-g2-g3-g4-t3452133
If I had better advice I would certainly give it to you.
tsongming said:
Other than what we have discussed. It seems to me that you have a hardware issue which if is the case you need to return it under warranty. Perhaps a component was not soldered well and it needs repair.
If you have owned the device for less than a year you should still be under warranty. If not maybe find a shop in your local area.
Worst case, the people at this link had some crazy ideas to resolve the same issue on another phone. If you are bold and desperate go take a look : https://forum.xda-developers.com/general/help/qa-wifi-stuck-mac-020000000000-g2-g3-g4-t3452133
If I had better advice I would certainly give it to you.
Click to expand...
Click to collapse
How I return everything in stock as if it were banggood came with version 23s
There is through return to stock instructions here on XDA.
tsongming said:
Source: https://android.izzysoft.de/articles/named/identifiers-1?lang=en
Follow any of the steps mentioned above, at your own discretion.
Click to expand...
Click to collapse
How and where to access/modify this "access_wifistate" permissions ? In apks, or etc / permissions ?
Yogesh1969 said:
How and where to access/modify this "access_wifistate" permissions ? In apks, or etc / permissions ?
Click to expand...
Click to collapse
The last time that I answered a question on this thread was over a year ago, and I rarely use a Le Pro 3, since buying another phone. So first you may want to describe your issue so I don't have to guess.
Since you are on this thread I assume that you have a baseband issue and likely have a corrupted EFS partition.
There are ways to delete and reload your modems.
However I don't recommend it and I will not describe it, the partition is encrypted and it should only be repaired from fastboot, recovery or EDL. Otherwise you risk unrecoverable damage.
The best thing to do, is to restore your full Nandroid backup
Hopefully made before you began flashing roms on this phone. So if you have one , do that.
The next options
Restoring the phone to factory stock with a fastboot rom. NOT A MODDED EUI, STOCK ONLY
Keep in mind that this may relock your bootloader.
Depending on which rom you use and this step is a little more dangerous if you have an X722.
If you have a X720 or X727
Try using my posted recovery, its includes the full efs.
If that doesn't work, you should find and download EUI 26s fastboot rom
If you have a X720 then unpack the 26S rom on your desktop, the 2GB file will unpack a 4GB version of the file, unpack it as well and you will now see a folder with all disk images. Look for the flashall.bat file and double click it. The flashboot.bat is a batch file that restores every partition one at a time, when the process is finished stock will be restore and the phone will automatically boot. Set the phone up, go to developer options and prepare the phone for a custom rom all over again.
If you have a X727, same steps but use EUI 21s fastboot instead of 26S
At this point the issue should be resolved, there is one other option of using QPST, with the stock QFil, but you will need to find a QCN file specifc to whichever device you own, it would be much easier to use flashall.bat or a Full Recovery.
Good Luck,
Also, I don't get paid to spend 20 minutes typing instructions, so click thanks or donate a beer. Cheers.