Install DSP on Lollipop 5.0.1 Moto G GPE - Moto G General

If you have just updated to the official Lollipop and missing beloved DSP.... install the attached, this is taken from the anerik's CM12 build.
Intsall any recovery
boot into recovery and install the DSP Zip.. be sure to root your phone before this..
Open up the DSP manager and set up your settings.. go to play music and in settings dont worry if it shows up only the music fx settings.. DSP settings will work

Working fine

I need install to my phone viper4android
My phone is rooted an 5.0.1 gpe but i can't install viper drivers
is it possible install via this method

FM radio work?

Intall v4a
micoperia said:
I need install to my phone viper4android
My phone is rooted an 5.0.1 gpe but i can't install viper drivers
is it possible install via this method
Click to expand...
Click to collapse
Hi, i had the same situation, the problem is your moto g is not fully rooted, so that you can't install drivers in v4a or manually, to solve this you must install via recovery this file, http: //download.chainfire .eu/638/SuperSU/BETA-SuperSU-v2.39.zip
and thats all, you will have full root on your phone.
I hope you can understand my english xD

micoperia said:
I need install to my phone viper4android
My phone is rooted an 5.0.1 gpe but i can't install viper drivers
is it possible install via this method
Click to expand...
Click to collapse
if you are getting problem in viper saying to install driver again and again then download SeLinux Mode changer and open the app and then give root permission and then select permissive
if you are getting busybox error then install busybox app from playstore

the problem i had with v4a was that the system partition wad full, using gpe 5.0.1 here.

thanks for answer and you are right
supersu code has been updated yesterday and solved viper situation
I was installed correctly last night and works perfectly

I cant install v4a
I downloaded SeLinux Mode changer and set to permissive, I have busybox installed, root working and I'm using 5.0.1 GPE. But I still can't install v4a drivers. Can anyone help me?

Related

Viper4android Easy Setup For Rooted Nexus 7 2013 Kitkat 4.4.4

(Required Root)
You can find required files in the attachments....
Q-Why am I posting this?
I recently bought nexus 7 2013 version and after installing the Viper FX I couldn't have the effects in streaming apps like tunein radio etc. So I searched threads after threads and I don't want anyone else to go through what I have gone through.
Caution
If any of you has viper4android installed previously then unistall the driver then uninstall the app then reboot and then flash the zip from TWRP.
So here are the steps.
1)Download the viper_v2.3.3.0.zip
2)Reboot into TWRP recovery mode
3)Flash the zip via TWRP recovery.
4)And then boot your nexus and open ViperFX
5)Grant root access and then install driver(super audio quality) (if it asks for busybox then install it from play store)
And now for configuring viper4android
just download headphones.zip extract it and place it at
/storage/sdcard0/ViPER4Android/Profile/
If u dont have folders then create by yourself and after pasting go to viperfx then in the menu>load effect rofile>headphones
please hit thanks if I helped you.
Problems with viper4android install
I would like to install Viper4android on my Nexus 2013 but am having problems . I downloaded the program from the play store , have busybox installed , set SElinux to permissive , installed viper drivers rebooted and it worked . However after a further reboot the drivers are not installed and I'm unable to install them following the steps mentioned above . I don't understand the instructions re flashing the file via TWRP recovery but have flashed my nexus using NRT so if someone could post some easy instructions I could have a go . I'd really like to get this mod working on my Nexus so any help would be appreciated . My device is rooted
len112 said:
I would like to install Viper4android on my Nexus 2013 but am having problems . I downloaded the program from the play store , have busybox installed , set SElinux to permissive , installed viper drivers rebooted and it worked . However after a further reboot the drivers are not installed and I'm unable to install them following the steps mentioned above . I don't understand the instructions re flashing the file via TWRP recovery but have flashed my nexus using NRT so if someone could post some easy instructions I could have a go . I'd really like to get this mod working on my Nexus so any help would be appreciated . My device is rooted
Click to expand...
Click to collapse
I flashed one of these files and it worked great for my Nexus 7.
EDIT: Oops, you didn't mention your Android version, but anyways, I'm on MM, so read carefully if your android version is compatible.
AssassinsLament said:
I flashed one of these files and it worked great for my Nexus 7.
EDIT: Oops, you didn't mention your Android version, but anyways, I'm on MM, so read carefully if your android version is compatible.
Click to expand...
Click to collapse
I'm also on Marshmallow , however I've never been shown how to flash a file but I can fellow step by step instructions if you can provide a link to the files I need to flash and any other software I might need . Thanks

FYI: Viper4Android DOES WORK

You just need to use the "Sony Beats Edition 5.5" to make it work. This version is a flashable zip and has the driver prepackaged.
It can be found in this thread:
http://forum.xda-developers.com/nexus-6/themes-apps/viper4android-t2952137
And here is the direct download link:
http://forum.xda-developers.com/attachment.php?attachmentid=3683972&d=1458053955
Are you getting headset and speaker processing as well? I've flashed stock and rooted fresh then installed BusyBox and flashed the 5.5 Beats zip 3 or 4 times now and it outright refuses to process anything besides Bluetooth. I'm also on the H830 and I'm at my wits end as to why everyone else is able to get this working besides me.
virgilante said:
Are you getting headset and speaker processing as well? I've flashed stock and rooted fresh then installed BusyBox and flashed the 5.5 Beats zip 3 or 4 times now and it outright refuses to process anything besides Bluetooth. I'm also on the H830 and I'm at my wits end as to why everyone else is able to get this working besides me.
Click to expand...
Click to collapse
Yes, all aspects of this are working fine for me. Bluetooth, Headset, and Phone Speaker... All functioning as they should... I doubt this will make any difference, but grab the zip I saved (and used) on my phone, from the Toy Box... It's in the "Apps (Root)" folder.
https://drive.google.com/folderview?id=0B74X5BCK5_hld05DQWdZRjlZczQ&usp=sharing
virgilante said:
Are you getting headset and speaker processing as well? I've flashed stock and rooted fresh then installed BusyBox and flashed the 5.5 Beats zip 3 or 4 times now and it outright refuses to process anything besides Bluetooth. I'm also on the H830 and I'm at my wits end as to why everyone else is able to get this working besides me.
Click to expand...
Click to collapse
If this method wont work,I have another.
1. Just flash clean System partition to get rid of v4a sony.
2. Download v4a apk and install.
3. Install driver if needed.
4. Install Busybox.
5. Install Selinuxchanger and change it to permissive.
6. You are ready to use Viper4Android on the G5
Sent from my LG-H850 using XDA-Developers mobile app
iGridZ said:
If this method wont work,I have another.
1. Just flash clean System partition to get rid of v4a sony.
2. Download v4a apk and install.
3. Install driver if needed.
4. Install Busybox.
5. Install Selinuxchanger and change it to permissive.
6. You are ready to use Viper4Android on the G5
Sent from my LG-H850 using
Click to expand...
Click to collapse
I've tried selinuxchanger but when it opens up and I grant it root access it tells me it wasn't able to get root access and leaves the options greyed out.
tribalartgod said:
Yes, all aspects of this are working fine for me. Bluetooth, Headset, and Phone Speaker... All functioning as they should... I doubt this will make any difference, but grab the zip I saved (and used) on my phone, from the Toy Box... It's in the "Apps (Root)" folder.
Click to expand...
Click to collapse
I'm in the middle of another fresh root flash, I'll give it a shot and report back in a bit.
virgilante said:
I've tried selinuxchanger but when it opens up and I grant it root access it tells me it wasn't able to get root access and leaves the options greyed out.
I'm in the middle of another fresh root flash, I'll give it a shot and report back in a bit.
Click to expand...
Click to collapse
You have to get Root on your Phone first and then try my other steps if Threat Tutorial wont work.
Sent from my LG-H850 using XDA-Developers mobile app
No luck. Wiped and flashed stock tot, flashed TWRP tot, formatted to remove encryption, wiped again just in case, formatted a second time, wiped again just to be sure, formatted a third time, flashed SuperSU, flashed dmverity, flashed V4A, granted storage permission for V4A, installed Busybox, opened the app, driver is normal and audio is supported, but it's not processing headset or speaker. Bluetooth is fine. SELinuxmodechanger is still being granted root access but refusing to acknowledge it.
Am I missing a step installing SuperSU? Should I forego the dmverity zip? Should I install Busybox to a different location? I've tried installing to su/xbin and system/xbin. Does the stock H830 kernel support permissive? How would I go about changing it? Kernel Adiutor has a plugin to change to permissive but it doesn't stick. It takes the su shell command to change it, but I can't confirm it in the phone settings.
virgilante said:
No luck. Wiped and flashed stock tot, flashed TWRP tot, formatted to remove encryption, wiped again just in case, formatted a second time, wiped again just to be sure, formatted a third time, flashed SuperSU, flashed dmverity, flashed V4A, granted storage permission for V4A, installed Busybox, opened the app, driver is normal and audio is supported, but it's not processing headset or speaker. Bluetooth is fine. SELinuxmodechanger is still being granted root access but refusing to acknowledge it.
Am I missing a step installing SuperSU? Should I forego the dmverity zip? Should I install Busybox to a different location? I've tried installing to su/xbin and system/xbin. Does the stock H830 kernel support permissive? How would I go about changing it? Kernel Adiutor has a plugin to change to permissive but it doesn't stick. It takes the su shell command to change it, but I can't confirm it in the phone settings.
Click to expand...
Click to collapse
Try another method to Install V4A. The method with flashing even didnt worked for me
Sent from my LG-H850 using XDA-Developers mobile app
Why are you using a permission changer? And why are you installing the stock TOT before the root TOT?
Here's what I did:
Rooted device (did not use stock TOT, went straight to the rooted TOT)
Reboot Recovery
Flash DM Verify
Flash SuperSU
Reboot System
Reboot Recovery
Make Backup
Flash Xposed
Install BusyBox
Flash V4A
Reboot System... All worked fine... To be fair, I did not mention I had BusyBox installed above... That "might" be the determining factor here? I'm currently making a backup of just my system partition... If you want to try it, I will upload it for you later tonight after I am done with work. It's 3.9Gigs. - If you decide to, make sure you have a backup of your own first. I am not liable for broken stuffs.
tribalartgod said:
Why are you using a permission changer? And why are you installing the stock TOT before the root TOT?
Here's what I did:
Rooted device (did not use stock TOT, went straight to the rooted TOT)
Reboot Recovery
Flash DM Verify
Flash SuperSU
Reboot System
Reboot Recovery
Make Backup
Flash Xposed
Install BusyBox
Flash V4A
Reboot System... All worked fine... To be fair, I did not mention I had BusyBox installed above... That "might" be the determining factor here? I'm currently making a backup of just my system partition... If you want to try it, I will upload it for you later tonight after I am done with work. It's 3.9Gigs. - If you decide to, make sure you have a backup of your own first. I am not liable for broken stuffs.
Click to expand...
Click to collapse
Because I'm grasping at straws.
I followed the your order, I'm still just getting bluetooth processing. I'm willing to try out your system partition, I figure there's not much left to lose at this point. If that doesn't work, I'll concede defeat and wait until the B&O module makes its way over.
virgilante said:
Because I'm grasping at straws.
I followed the your order, I'm still just getting bluetooth processing. I'm willing to try out your system partition, I figure there's not much left to lose at this point. If that doesn't work, I'll concede defeat and wait until the B&O module makes its way over.
Click to expand...
Click to collapse
I messaged you the /system backup. I hope this works for you... Let us know plz
Hey sorry to bump this fairly old thread but I'm having problems getting Viper to work on mine too. Bluetooth only works. I installed the 5.5 beats one too but nothing... Did you ever get it to work??
Thanks.
Busybox installed and selinux mode set to permissive?
You could try this fix: http://forum.xda-developers.com/android/software/mod-viper4android-universal-fixer-fix-t3360192
Hello,
i installed viper and it doesn't work. I rooted my phone, installed busybox with TWRP Manager before, but i don't hear any improvement. Selinux mode is set to permissive and i tried the fix but nothing worked. Can anybody help me?
Edit: It just don't wanna work with Deezer....
Lubastos said:
Hello,
i installed viper and it doesn't work. I rooted my phone, installed busybox with TWRP Manager before, but i don't hear any improvement. Selinux mode is set to permissive and i tried the fix but nothing worked. Can anybody help me?
Edit: It just don't wanna work with Deezer....
Click to expand...
Click to collapse
Doesn't work with spotify either.. Whereas it use to to... Pointless me installing it as only use spotify for music..
Sent from my LG-H850 using Tapatalk
Guys I have installed the dolby atmos version and ran a fix, it works on everything (speaker, headset, spotify..). But still not perfect, I believe an app is interferring with v4a, almost every time I need to do a phone restart before I start playing music, but then it works for hours...

ViPER4ANDROID not working properly on MOTO G4 PLUS.

I have rooted the device, and currently using Nougat RR ROM. But ViperDD is not working properly on device. Busybox also installed, the driver status shows Abnormal. Any Solution for it.
Uninstall Viper driver, reboot and then go to /system/vendor/etc and rename audio_effects.conf as audio_effects.conf.bak, go back to Viper app and try to install the driver or just check the driver status, should work with that
uday_kruk said:
I have rooted the device, and currently using Nougat RR ROM. But ViperDD is not working properly on device. Busybox also installed, the driver status shows Abnormal. Any Solution for it.
Click to expand...
Click to collapse
I would also check that your kernel is set to permissive, not enforcing. Heard that causes problems as well.
Also, you might like to install SuperSU from XDA rather than using the inbuilt CM root, as it appears to resolve the Abnormal error you're seeing. (credit: https://plus.google.com/communities/104675617308252943432)
The stable SuperSU is herehttps://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703. I've installed the TWRP version of SuperSU on my XT1642 Plus on RR 5.8.0 24/01/2017 build (after making a backup in TWRP) and flashed Viper4Arise (i think it's based on Viper4Android), which works well
uday_kruk said:
<snip> Any Solution for it.
Click to expand...
Click to collapse
The Arise Sound System zip flash works much better:
https://forum.xda-developers.com/and...earch-t3379709
But they leave out the critical step of modifying the arise_customize.prop file and placing it in internal storage
BEFORE you flash (SMH).
http://www.droidviews.com/install-ar...d-mod-android/
-G
If you use Magisk, ViPER4Android works flawlessly on nougat ROMs using the ViPER4Android for Magisk v14 module found within the downloads section of Magisk Manager, just install and reboot, nothing more required.

Viper Audio LG G6 H870 ROM STOCK V10T ?

Hello, I would like to know if there is a solution to install viper Audio because I am very disappointed with the equalization with a headset.
I have a model H870 with stock firmware V10t rooted with Magisk
Thank You
I respond to myself, I successfully installed viper4android fx directly with an apk and everything works fine.
Finally the sound is beautiful !!! ?
Apk https://mega.nz/#!zppXUQQJ!kXgeCqp3IIM-iY0BiWYpNHgwNhwiN4MkfdlF8OL8gpE
dydy85230 said:
I respond to myself, I successfully installed viper4android fx directly with an apk and everything works fine.
Finally the sound is beautiful !!! ?
Click to expand...
Click to collapse
How do you make it? I have installed the apk, the V4A driver directly from the app and it does enable the driver. How can I make the driver work?
mprovi_15 said:
How do you make it? I have installed the apk, the V4A driver directly from the app and it does enable the driver. How can I make the driver work?
Click to expand...
Click to collapse
Hello, yes I directly install the drivers (root) with the apk, wait installation (2-3min) and 'yes' to reboot
It works perfectly
Configuration:
LG H870
Magisk 14.0
Firmware LG V10T
Make a backup with TWRP before installation
Pictures
https://image.noelshack.com/fichiers/2017/40/4/1507166382-capture-2017-10-05-03-08-27.png
https://image.noelshack.com/fichiers/2017/40/4/1507166394-capture-2017-10-05-03-08-40.png
https://image.noelshack.com/fichiers/2017/40/4/1507166392-capture-2017-10-05-03-09-11.png
https://image.noelshack.com/fichiers/2017/40/4/1507166395-capture-2017-10-05-03-09-22.png

Can't uninstall abnormal viper4android drivers

I just recently installed LineageOS 14.1 and the su package on my Galaxy Note 3 (SM-N900P) and decided to install Viper4Android 2.5.0.5 via the ARISE package. I opened the app and it asked me to install the drivers, but then it immediately said that they couldn't install because it couldn't get root access. I made sure in the developer settings that root access was set to Apps and ADB. I tried uninstalling the drivers but I can't. Now it's stuck with abnormal drivers and I have no idea how to fix this.
YajuShinki said:
I just recently installed LineageOS 14.1 and the su package on my Galaxy Note 3 (SM-N900P) and decided to install Viper4Android 2.5.0.5 via the ARISE package. I opened the app and it asked me to install the drivers, but then it immediately said that they couldn't install because it couldn't get root access. I made sure in the developer settings that root access was set to Apps and ADB. I tried uninstalling the drivers but I can't. Now it's stuck with abnormal drivers and I have no idea how to fix this.
Click to expand...
Click to collapse
Make sure Busybox (preferably Stericson's build) is installed. V4A requires it to handle its driver.
zlazaar said:
Make sure Busybox (preferably Stericson's build) is installed. V4A requires it to handle its driver.
Click to expand...
Click to collapse
Busybox installed without any issues, and the uninstall seemed to work immediately after, but v4a still can't install the drivers because it still can't get root permissions. And when I try to uninstall, it doesn't prompt me to install the drivers and the driver status still reads "abnormal".
YajuShinki said:
Busybox installed without any issues, and the uninstall seemed to work immediately after, but v4a still can't install the drivers because it still can't get root permissions. And when I try to uninstall, it doesn't prompt me to install the drivers and the driver status still reads "abnormal".
Click to expand...
Click to collapse
We can spend days troubleshooting your problem since you didn't mention many important informations (SELinux status, used Arise edition, selected options in arise_customize.prop...)
so allow me to describe a fail-proof method :
1- Dirty flash you rom.
2- Flash Latest Magisk.
3- Remove AudioFX app from /system/priv-app/
4- Download and install V4A FX module (available in download section of magisk manager).
That's it... good luck :good:
Or the Thread APP All Route
Overload87 said:
I have same Problem, on Samsung S5, with AOSP,AEX Rom Android 9 ! But still drivers not Working!
How could i deinstall Viper4Andriod !
Click to expand...
Click to collapse
Wrong forum this is for Note 3 not S5.
Usual is to restore Nandroid or reinstall rom .
V4A thread

Categories

Resources