Database Users

Firmware Flash failed by Odin (SW REV check fail)

Hi I have s4 i9500 (pak region). Installed kitkat 4.4.2 russian by odin 3.09 worked fine. Now i want to install my stock rom 4.3 pak region but it fails i have tried many times using diferent computers and cables. odin log is given below:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUEMJ8_I9500OJVEMJ8_I9500XXUEMJ8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
On the phone when i enter downloading mode it says knox warrenty void:1
after i try flashing stock 4.3 firmware phone says SW Check fails Binary:1
How can i fix this and install my region firmware please help.
Or i cannot downgrade to 4.3 because of bootloader update please let me know. thanks

Your last sentence has the answer....

you can try restoring the backup (if you did) of boot; i think.

theunderling said:
Your last sentence has the answer....
Click to expand...
Click to collapse
thanks

U should nt try of downgrading from 4.4.2

Quick question
I have the same problem and i wish to go back to 4.3 jellybean because the gyroscope its not working when i try to install the rom 4.4.2 in odin fail the same so if you can point me where to look. that would be great. ( i apologize for my low tech knowledge and my english)

For now I think there is no way to downgrade as because of bootloader

[Q] Galaxy Note 3 SM-N9005 LTE Softbrick(international)

I Bought this phone from UAE don't know much about origin but i think its international Stock rom factory Unlocked
tried to update with kitkat 4.4.2 Luxemburg my bads
now phone is in firmware upgrade encountered an issue and can be boot in download mode
i have tried kies 3 but kies couldn't recognize it
tried to flash with odin 3.09 with firmware N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5
[<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/049> Added!!
<ID:0/049> Odin v.3 engine (ID:49)..
<ID:0/049> File analysis..
<ID:0/049> SetupConnection..
<ID:0/049> Initialzation..
<ID:0/049> Get PIT for mapping..
<ID:0/049> Firmware update start..
<ID:0/049> SingleDownload.
<ID:0/049> sbl1.mbn
<ID:0/049> NAND Write Start!!
<ID:0/049> aboot.mbn
<ID:0/049> FAIL! (Auth)
<ID:0/049>
<ID:0/049> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)]
kindly help me out to fix it

Afzaal said:
I Bought this phone from UAE don't know much about origin but i think its international Stock rom factory Unlocked
tried to update with kitkat 4.4.2 Luxemburg my bads
now phone is in firmware upgrade encountered an issue and can be boot in download mode
i have tried kies 3 but kies couldn't recognize it
tried to flash with odin 3.09 with firmware N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5
[<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/049> Added!!
<ID:0/049> Odin v.3 engine (ID:49)..
<ID:0/049> File analysis..
<ID:0/049> SetupConnection..
<ID:0/049> Initialzation..
<ID:0/049> Get PIT for mapping..
<ID:0/049> Firmware update start..
<ID:0/049> SingleDownload.
<ID:0/049> sbl1.mbn
<ID:0/049> NAND Write Start!!
<ID:0/049> aboot.mbn
<ID:0/049> FAIL! (Auth)
<ID:0/049>
<ID:0/049> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)]
kindly help me out to fix it
Click to expand...
Click to collapse
U r trying to downgrade from 4.4.2 to 4.3 which is not possible, even its failed your bootloader is upgraded to kitkat, try to flash poland latest ROM B3, everything will be fine.
Download from below link
http://www.sammobile.com/firmwares/2/

I had the same problem. Flash the device by using a PIT file and have repartition selected. It will wipe all your data but it worked for me.
Sent from my SM-N9005 using Tapatalk
---------- Post added at 12:22 PM ---------- Previous post was at 12:21 PM ----------
Sorry, I'm not sure about the previous solution given, I just know my way worked for me.
Sent from my SM-N9005 using Tapatalk

Afzaal said:
I Bought this phone from UAE don't know much about origin but i think its international Stock rom factory Unlocked
tried to update with kitkat 4.4.2 Luxemburg my bads
now phone is in firmware upgrade encountered an issue and can be boot in download mode
i have tried kies 3 but kies couldn't recognize it
tried to flash with odin 3.09 with firmware N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5
[<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/049> Added!!
<ID:0/049> Odin v.3 engine (ID:49)..
<ID:0/049> File analysis..
<ID:0/049> SetupConnection..
<ID:0/049> Initialzation..
<ID:0/049> Get PIT for mapping..
<ID:0/049> Firmware update start..
<ID:0/049> SingleDownload.
<ID:0/049> sbl1.mbn
<ID:0/049> NAND Write Start!!
<ID:0/049> aboot.mbn
<ID:0/049> FAIL! (Auth)
<ID:0/049>
<ID:0/049> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)]
kindly help me out to fix it
Click to expand...
Click to collapse
N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md 5 >> is not 4.4.2 (KK) rom. You are trying to downgrade your phone. Download the latest KK firmware and then reflash and see how it goes.

jdomadia said:
U r trying to downgrade from 4.4.2 to 4.3 which is not possible, even its failed your bootloader is upgraded to kitkat, try to flash poland latest ROM B3, everything will be fine.
Download from below link
http://www.sammobile.com/firmwares/2/
Click to expand...
Click to collapse
thanks billions for your golden words you made my Day...
here is log and note3 is unbricked...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!

Afzaal said:
thanks billions for your golden words you made my Day...
here is log and note3 is unbricked...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
Click to expand...
Click to collapse
hey i had the same issue but when my phone got alive but i found an issue that my ram got 1.76gb instead of 2.38 or ABOVE can you guide me that what is the issue

redox990 said:
hey i had the same issue but when my phone got alive but i found an issue that my ram got 1.76gb instead of 2.38 or ABOVE can you guide me that what is the issue
Click to expand...
Click to collapse
are you sure its saying that is your total amount of ram? or is it just your available/currently used ram?
if you have 3gb total ram, the available ram will always be less than that.. depending on what else is running at the time, so it will change frequently.
for e.g my note 3 currently says RAM STATUS 1.38GB/2.71GB
2.71GB = total ram (it will always display slightly less than the supposed 3GB that it has)
1.38GB = either amount of ram currently in use or amount of ram currently available (im not sure which way they do it)
but if the second number is anywhere close to 3GB, theres nothing wrong.

same problem probably same phone (
jdomadia said:
U r trying to downgrade from 4.4.2 to 4.3 which is not possible, even its failed your bootloader is upgraded to kitkat, try to flash poland latest ROM B3, everything will be fine.
Download from below link
http://www.sammobile.com/firmwares/2/
Click to expand...
Click to collapse
My problems also same. i am downloading now latest poland rom N9005XXUEND3_N9005XEOEND2_XEO.zip is it ok ? or do i need to use as you mentioned B3 rom of Poland ?
I try different stock roms from sam mobiles but my n9005 still imei null /null (
Any help ?

ohayyam said:
My problems also same. i am downloading now latest poland rom N9005XXUEND3_N9005XEOEND2_XEO.zip is it ok ? or do i need to use as you mentioned B3 rom of Poland ?
I try different stock roms from sam mobiles but my n9005 still imei null /null (
Any help ?
Click to expand...
Click to collapse
use efs backup if u have or use EFS Professional to resolve ur problem
if it help don't forget to press thanks

ohayyam said:
My problems also same. i am downloading now latest poland rom N9005XXUEND3_N9005XEOEND2_XEO.zip is it ok ? or do i need to use as you mentioned B3 rom of Poland ?
I try different stock roms from sam mobiles but my n9005 still imei null /null (
Any help ?
Click to expand...
Click to collapse
If its a same problem as OP u can flash XEO ROM, Its a stable rom.

dul-faqar said:
use efs backup if u have or use EFS Professional to resolve ur problem
if it help don't forget to press thanks
Click to expand...
Click to collapse
Can efs professional resolve my problem without EFS back-up ? let me look that tread to unserstand and try to give chance ..
Thanx Buddy
---------- Post added at 07:51 AM ---------- Previous post was at 07:43 AM ----------
jdomadia said:
If its a same problem as OP u can flash XEO ROM, Its a stable rom.
Click to expand...
Click to collapse
i try but i will try different versions of XEO.
Thanx.

ohayyam said:
Can efs professional resolve my problem without EFS back-up ? let me look that tread to unserstand and try to give chance ..
Thanx Buddy
---------- Post added at 07:51 AM ---------- Previous post was at 07:43 AM ----------
i try but i will try different versions of XEO.
Thanx.
Click to expand...
Click to collapse
will resolve ur problem with or without efs backup

dul-faqar said:
use efs backup if u have or use EFS Professional to resolve ur problem
if it help don't forget to press thanks
Click to expand...
Click to collapse
already pressed thanx even my problem not fixed yet
could you please explain step by step how can i fix it with efs pro..
Thanx

ohayyam said:
already pressed thanx even my problem not fixed yet
could you please explain step by step how can i fix it with efs pro..
Thanx
Click to expand...
Click to collapse
Connect ur phone (rooted) on pc and open efs proffesional ...let him few second then after connected complete choice backup and choice device type and u will see network comeback
Sorry for my bad language

How EFS Pro works ???
dul-faqar said:
Connect ur phone (rooted) on pc and open efs proffesional ...let him few second then after connected complete choice backup and choice device type and u will see network comeback
Sorry for my bad language
Click to expand...
Click to collapse
Do you mean if i back up my softbricked N9005 with EFS pro, my network will work? how ???
i already try back up working N9005 efs files to PC then connect softbricked N9005 and restore on it still not working ?
but i will try for to backup as you advice

Downgrade to 4.3

Hello
Samsung Galaxy Grand 2 SM-G7102 , Andriod version 4.4.2
trying to downgrade it to 4.3 Jelly bean using odin and stock firmwares but got FAIL!!
Report in Odin
-------------------------------------------------
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G7102XXUANA1_G7102OJVAML3_G7102XXUAML5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-------------------------------------------------
Message on the phone screen
SW REV CHECK FAIL : sbl1 Fused 2 Binary 1
*********************************************************
Is there fix for this problem ??

I have the same problem. I would like to know also

i also have sameproblem xda developers please help me

munna01 said:
i also have sameproblem xda developers please help me
Click to expand...
Click to collapse
have you rooted youre device yet?
Sent from my SM-G7102 using Tapatalk

u can downgrade only to thailand version of 4.3... check out this video.... https://www.youtube.com/watch?v=6KHuIOxPmsc
i am not responsible for anything happening to your device... do it as ur own risk...

telling
use odin v3.10.6 and in option tab tick nand erase all and phone efs clear and phone bootloader update
untick auto reboot

Yea i downgrade to 4.3 thanks man

Will this video for downgrade work for SM-G7105 as well? Thanks
Sent from my SM-G7105 using Tapatalk

Odin fails to downgrade from 5.1.1 to 4.4.4

I have a SM-N910C and downloaded the 4.4.4 firmware from sammobile.com, I actually tried 2 different firmwares from my country and both fail when I try to flash them via Odin.
Any help is appreciated.:crying:
Odin says:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910CXXU1ANIF_N910CZVV1ANIF_N910CXXU1ANIG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone says:
Code:
ODIN MODE
PRODUCT NAME: SM-N910C
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download: Enabled
KNOX WARRANTY VOID: 1
RP SWREV: 2
SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1

theplagueisback said:
I have a SM-N910C and downloaded the 4.4.4 firmware from sammobile.com, I actually tried 2 different firmwares from my country and both fail when I try to flash them via Odin.
Any help is appreciated.:crying:
Odin says:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910CXXU1ANIF_N910CZVV1ANIF_N910CXXU1ANIG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone says:
Code:
ODIN MODE
PRODUCT NAME: SM-N910C
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download: Enabled
KNOX WARRANTY VOID: 1
RP SWREV: 2
SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1
Click to expand...
Click to collapse
So If you have COJ5,you cant downgrade :/ cuz bootloader.
If you have COI4,try first downgrade to 5.0.1 than on 4 4.4 gl

theplagueisback said:
I have a SM-N910C and downloaded the 4.4.4 firmware from sammobile.com, I actually tried 2 different firmwares from my country and both fail when I try to flash them via Odin.
Any help is appreciated.:crying:
Odin says:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910CXXU1ANIF_N910CZVV1ANIF_N910CXXU1ANIG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone says:
Code:
ODIN MODE
PRODUCT NAME: SM-N910C
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download: Enabled
KNOX WARRANTY VOID: 1
RP SWREV: 2
SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1
Click to expand...
Click to collapse
Plz look in that thread > http://forum.xda-developers.com/note-4/help/note-4-sm-n910c-sw-rev-check-fail-t3311946

shababik said:
Plz look in that thread > http://forum.xda-developers.com/note-4/help/note-4-sm-n910c-sw-rev-check-fail-t3311946
Click to expand...
Click to collapse
I did that and the error went away (deleted sboot.bin and modem.bin and repacked with 7zip as Tar) however i'm stuck on a boot loop now...
I tried doing factory reset but that doesn't fix the boot loop, any ideas?
Thanks

Jovan1997 said:
So If you have COJ5,you cant downgrade :/ cuz bootloader.
If you have COI4,try first downgrade to 5.0.1 than on 4 4.4 gl
Click to expand...
Click to collapse
I deleted sboot.bin and modem.bin and after flashing I'm on a boot loop and ODIN fails to install 5.1.1 with the same error.
Any help is much appreciated!!!
Phone says now in boot loop:
Code:
CURRENT BINARY: Samsung Official

Fixed by downloading stock 5.1.1, deleting modem.bin and sboot.bin from the tar, packing again and flashing via ODIN.

Jovan1997 said:
So If you have COJ5,you cant downgrade :/ cuz bootloader.
If you have COI4,try first downgrade to 5.0.1 than on 4 4.4 gl
Click to expand...
Click to collapse
My phone is back working on 5.1.1 however then I try to flash 5.0.1 via ODIN the same issue happens:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910CXXU1BOC3_N910CZTO1BOB4_N910CXXU1BOC3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Jovan1997 said:
So If you have COJ5,you cant downgrade :/ cuz bootloader.
If you have COI4,try first downgrade to 5.0.1 than on 4 4.4 gl
Click to expand...
Click to collapse
Crap, just checked and I'm on COJ5.

theplagueisback said:
Crap, just checked and I'm on COJ5.
Click to expand...
Click to collapse
All coj5 and above bootloaders are locked you can not downgrade from them to 4.4.4 or even to an earlier version of 5.1.1.

dork997 said:
All coj5 and above bootloaders are locked you can not downgrade from them to 4.4.4 or even to an earlier version of 5.1.1.
Click to expand...
Click to collapse
What about http://forum.xda-developers.com/note-4/development/rom-wanamlite-clean-odex-xposed-t2923266 ?

theplagueisback said:
What about http://forum.xda-developers.com/note-4/development/rom-wanamlite-clean-odex-xposed-t2923266 ?
Click to expand...
Click to collapse
It bassed on last COJ5,so yes u can install this ROM.

dork997 said:
All coj5 and above bootloaders are locked you can not downgrade from them to 4.4.4 or even to an earlier version of 5.1.1.
Click to expand...
Click to collapse
is there any way to unlock this downgrade restriction ????

*SHB* said:
is there any way to unlock this downgrade restriction ????
Click to expand...
Click to collapse
Unfortunately no way to bypass this restriction

dork997 said:
Unfortunately no way to bypass this restriction
Click to expand...
Click to collapse
Can z3x box pro help us for downgrade ????
Any tutorial how to remove everything on note 4 include bootloader and reinstall bootloader through z3x box ???

There is a way is to buy international model of mobile and you cant down or up if u have locked boot-loader..
Like example the "G" version from SEA can downgrade and upgrade as long you have the firmwares..
Till now there is still no stable way to bypass the locked BL, unless you change the chipset from locked note 4 to other note 4..

*SHB* said:
Can z3x box pro help us for downgrade ????
Any tutorial how to remove everything on note 4 include bootloader and reinstall bootloader through z3x box ???
Click to expand...
Click to collapse
As of now , noone has successfully downgraded bootloader from coj5 or above. No way of doing this. Samsung is trying to copy apple by locking bootloaders on international variants.:good:

dork997 said:
As of now , noone has successfully downgraded bootloader from coj5 or above. No way of doing this. Samsung is trying to copy apple by locking bootloaders on international variants.:good:
Click to expand...
Click to collapse
It's only the Exynos and US model variants that have this issue. If you buy the F model you can downgrade to 5.0.1 or 4.4.4

SM-T330NU to SM-T330 Odin Problem

Hi I'm trying to install the stock rom Lolipop 5.1.1 for SM-T330
I'm now in Lolipop 5.1.1 but for SM-T330NU
bUT when i'm flashing with ODIN I got this error:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i.imgur.com/34ILBtB.png
I've tried changing the usb cable but I got the same problem , any help please?

addrowmel said:
Hi I'm trying to install the stock rom Lolipop 5.1.1 for SM-T330
I'm now in Lolipop 5.1.1 but for SM-T330NU
bUT when i'm flashing with ODIN I got this error:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i.imgur.com/34ILBtB.png
I've tried changing the usb cable but I got the same problem , any help please?
Click to expand...
Click to collapse
Why you trying to flash another's firmware ? You can to flash only your native T330NU firmware .

repey6 said:
Why you trying to flash another's firmware ? You can to flash only your native T330NU firmware .
Click to expand...
Click to collapse
Becauase I prefer that firmware ... so is not possible?

addrowmel said:
Becauase I prefer that firmware ... so is not possible?
Click to expand...
Click to collapse
How you can prefer this firmware if they both is the same ? In T330NU add ir-blaster only , that's all difference .

addrowmel said:
Becauase I prefer that firmware ... so is not possible?
Click to expand...
Click to collapse
No it is not possible

waiting for another answers :good:

addrowmel said:
waiting for another answers :good:
Click to expand...
Click to collapse
Just because it's not the answer you want doesn't make it incorrect. You can't flash an Odin firmware file for one model on a different model. This is a simple fact

addrowmel said:
waiting for another answers :good:
Click to expand...
Click to collapse
you could repack the tar without aboot and sbl and some other, but it doesnt make any sense, delete ir hal and perm. file. but why?