Not sure if this has been posted yet, but I found this Z3c teardown video. No close-ups so it's hard to see much detail, but at least it gives a good idea of the guts of the phone and how it's assembled. And the back glass didn't crack when it was prized off!
http://youtu.be/i_mjlieeNAw
I may not like the fact that this phone lacks a user-removable battery, however the ease of access to the battery itself is a relief.
I wonder how opening affects the waterproofing. I remember I opened by waterproof watch once to replace the battery and it was never fully waterproof after that.
I wonder how difficult it would be to add wireless charging...
1. Wow that's a big battery... no wonder
2. Teardown videos should really be in 1080p
@jug6ernaut There doesn't seem to be much room to play with, the QI receiver would have to be very slim. The one's I've had in the past had PCB components that would be too thick to fit in there. Anyone know which QI receiver is the slimmest? I love QI charging and plan on playing around with something DIY, but it will probably be something external case-based.
@banjker I too would like to know about the waterproofing. It looks like there's an insulated rubber strip around the edge, you can see it better in the Z3big teardown. They mangled it, but I'd imagine you could do it non-destructively by heating it up first.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ok so with all these cases of cracking back glass it looks like it's quite easy to remove the back panel and replace it with a new one your self off eBay or somewhere?
gadgetman04 said:
Ok so with all these cases of cracking back glass it looks like it's quite easy to remove the back panel and replace it with a new one your self off eBay or somewhere?
Click to expand...
Click to collapse
Perhaps, but there's no indication of how easy it is to reattach the back and without the right foam/adhesive the phone will no longer be waterproof ( I doubt the existing foam can be saved, even by heating)
Related
Hi guys,
I'm having this problem and I would like to know if it's happening to someone else. There are certain parts of the battery cover that will click and crack when pressed. They're basically the phone's "temples" (the top part of the phone's sides) and the area around the headphone jack, as shown on this pic:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's pretty irritating, since that's basically the area I use to grab the phone and get it out of its case. Do you get it too?
I don't have this problem. But I expect people will get the same problem if they open the battery cover too many times. You can try calling HTC to see if you can buy a battery cover from them.
mine does it. Didn't at first, now it does. No big deal.
Thanks for your replies guys, glad to know that at least one more person has this problem too
Rvinny, have you ever dropped your phone? I have, and fear both things might be related.
I've dropped it like four times now and mine doesn't creak. I am probably the pickiest person in the world too, but I have to say... the build quality on this phone is pretty solid... its just too bad they used the worst speakers ive ever heard in a mobile phone before. Bet the speakers on the desire will be good though ... bastards...
mine clicks in the same spots.
i've been thinking about getting a replacement battery cover.
easy fix - put a miniscule amount of electrical tape right under each of the corner tabs on the battery cover to use as a padding/buffer. result - solid feeling phone, no more flex.
denimjunkie82 said:
easy fix - put a miniscule amount of electrical tape right under each of the corner tabs on the battery cover to use as a padding/buffer. result - solid feeling phone, no more flex.
Click to expand...
Click to collapse
Dude, it worked! you saved my phone!
Hello there, this should probably not be worth an own topic, but i thought it could be helpful for others alike me, looking for a quick
and cheap solution to use your XPERIA Z on your Motorbike to Navigate through the Streets.
I first (sucessfully) attempted a "prototype" case in which i basically build up a "negative" case, that just flipped right over the Xperia Z and the Dockinstation, basically like a cassete-case:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But i had my doubts that it would probably not withstand a bigger fall (yet to happen ) and the the mini-usb Port on the Dockingstation would be prone to rain if not siliconized properly.
So... i kept looking around and probably found _THE_ sollution or more precisely the case that just fits the dockingstation and the xperia both inside and is sturdy enough to withstand a fall alike some mayor rain falling on top of it
It's the PELICAN 1040 Case!
I first had my doubts if the "grid-like" bars at the translucent front would allow to have a clear view, but yep, it absolutelly has, you just have to remove the sticker.
And then the Xperia-Z+Dockingstation fit in like its been designed just for this purpose, you just need a right-angled Micro-USB Cable as there isnt that much space to fit in a straight one.
Just drill a hole, push it trough the box so that it is centered as precise as possible and then plug in the dockingstation to see if everything fits okay.
Then clean everything with rubbing alcohol and after that apply enought silicon so that it sits in there and want come out that easy.
I used some sand-paper to grind it up a bit and give it more grip on both sides.
The way mount it unto your bike, depends on your bike and the way you like it most, i justed used some absolutelly standard Motorbike-Mount fixed by four screws (drilled trough the back of the pelican-box) that sits just in front of the spedo
Like this basically just thinner aluminum.
I will make some pictures as soon as iam able to get my hands on a secondary camera (wouldnt make sense to take a picture of an empty box with my xperia :laugh::silly:
Hope this might help someone, that is probably thinking about something similiar!
Well, I fell snowboarding the other day with my phone in a chest pocket. I caught an edge and sandwiched my hand between my body and some ice. Needless to say I broke my hand and completely bent my phone but miraculously my screen didn't break, so at least I have that going for me which is nice.
Kind of sucks because HTCS 6 month manufacturing warranty only covers cracked screens, fml
Here are some pictures, I figured somewhere here might enjoy this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hope you have a speedy recovery!
Htc One wave (tm)
On a serious note that should be easily fixed just by replacing the case. That is if everything works fine inside
I got pain on the chest by looking at those pictures.
Hope you can fix it soon.
Yeah, ordering a new backside should be the cheapest way. Replacing it is not hard - all you need is a bit of patience and a source of heat. Order the top and bottom of the front aswell, those are bastards to remove and replace properly - other then that it sounds more dramatic then it is.
remove tops and bottom, heat and remove back side (there is guides on youtube/interwebz). The internals and screen is the expensive parts and those should still be allright for you.
Yea I've thought about replacing the case., I was able to bend it slightly back into place which makes it at least fit in the case again.
Everything works, for now. The only problem I've noticed is two bright spots in the center of the screen most likely from something pushing on the backlight. It's only noticable when looking at dark content which I can lI've with.
I must say HTC did a pretty damn good job engineering this phone :good:
if HTC-LG have a baby...this is the HTC G-flex
@popwarfour At least you managed to answer the question. "HTC One M8 - Does it bend?"
Hope your hand recovers okay.
I actually bent mine as well somehow and I sent it into htc for repair, they fixed it and didn't charge me anything for it. I can't even tell it was even bent. Mine was not as severe as that though.
So I used to have a Galaxy Note 3 and the NFC chip was on the battery. I thought the same was the case with my V20 until I bought one of those extended 6600mAh batteries (because I dont really care about the thinness of the phone) which doesnt support NFC. I noticed the lack of the black ribbon around the camera and the 2 contacts on it. Im assuming this is the NFC chip? Do you guys think it would be possible to peel it off and stick it on the new back cover that comes with this extended battery? NFC is something I use daily for NFC payments (since its widely available in Australia) and would love to still be able to use it.
Pic for what I mean
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Splitting hairs, but what you see around the camera cutout on the cover is the antenna for the NFC chip. Chip is on board itself.
Honestly, I would imagine it would work, were you to be really careful about pulling the ribbon off..
That said, practicality of the matter is another thing entirely. those damned ribbon cables are crazy fragile. like, dont look at it too long, or you'll tear it fragile. and, i imagine it is stuck to the original cover with some sort of adhesive or another.
tl;dr
the odds of a botched removal are too damned high!
I'd actually like to know about this myself. Considering the v20, with the extended batteries as a main point as I hate being grounded to a charger, but NFC seems like something i would like to start to use as mobile payments are being accepted at more and more places. If you try it, let us know how it goes. Maybe you can put tape on the sticker to give it more support? Who knows. If you mess up, I'm finding spare back covers with NFC antennae for around 20 USD on Amazon.
Alik
I have a post in section for accessoires for backcovers could u please post the shop at Amazon there. I'm looking for them. https://forum.xda-developers.com/v20/accessories/backcovers-shop-t3582813
I'm looking to purchase a OnePlus 5. And in my research I've discovered that its pretty common knowledge that all OnePlus 5's come with a "scratch" in the top center of the camera housing and that this is meant for the NFC Antenna. However, some have commented about the black paint on their OnePlus 5's rear camera housing chipping/scratching easily in other areas. Some even mentioned that their camera housing was severely scratched up, right out of the box.
Take this instance, for example:
https://forums.oneplus.net/threads/camera-housing-scratched.557376/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I plan on using a case, either way. But I am curious to get a better idea from current OnePlus 5 owners to see how many people have additional paint chipping issues.
1. He needs a manicure
2. Use a case
3. Find a new job that doesnt involve using your phone as a sanding block.
If you go bare back its bound to get raw.
Atlantian said:
1. He needs a manicure
2. Use a case
3. Find a new job that doesnt involve using your phone as a sanding block.
If you go bare back its bound to get raw.
Click to expand...
Click to collapse
Yeah, that dude's hands are pretty messed up. :laugh:
I've always been a case/screen protector person. My concern is that people in the above linked thread and a couple other threads on the OnePlus forums are reporting their camera housing gettings chipped up, even with a case. It seems that the black coating on the camera housing is poorly applied and is extremely easy to damage.
I simply created this poll to get an idea of the average percentage of OP5 owners on this thread that have experienced this issue, in relation to the total number of votes received.
The poll is getting votes but no comments, so I'm bumping this thread to keep it near the top to accrue more data.
Mine has this problem out of the box and it's getting worse. 6gb / 64gb version. I bought it at launch
The edge of the rear camera paint has scratched off and it's only been on a soft wooden table
Mine has been in a case since day one so zero scratches