Database Users

Nexus 7 just showed up from Google Play Aug31, left side of the screen is separating.

I hadn't even heard of this problem and didn't notice it until a couple hours after I had been playing with the device while I was searching in frustration how to get the drivers to root on Windows 8.
Good thing I never figured it out before I noticed the left side of the glass was sticking up just a tiny bit on my brand new Nexus 7. It's still stock If I want to return it. I can push down and hold the middle part of the left side of the screen for a few seconds and it seems to stay down for a few minutes but eventually keeps popping back up just slightly. I've searched and seen videos on youtube where some go to extreme measures of pulling the device apart and tightening screws or clamping it together for hours while leaving it playing HD movies until the battery dies and other methods way beyond those.
Do I I just try and put this flaw out of my mind and be grateful I didn't get a device like some other threads I've found (dead pixels, dead touch zones, brightness issues, etc.) or do I complain to Google ASAP and ask for a replacement while it's still new?
Will they send me out a new device first and then make me ship this unit back or vice versa?

LaTropa64 said:
I hadn't even heard of this problem and didn't notice it until a couple hours after I had been playing with the device while I was searching in frustration how to get the drivers to root on Windows 8.
Good thing I never figured it out before I noticed the left side of the glass was sticking up just a tiny bit on my brand new Nexus 7. It's still stock If I want to return it. I can push down and hold the middle part of the left side of the screen for a few seconds and it seems to stay down for a few minutes but eventually keeps popping back up just slightly. I've searched and seen videos on youtube where some go to extreme measures of pulling the device apart and tightening screws or clamping it together for hours while leaving it playing HD movies until the battery dies and other methods way beyond those.
Do I I just try and put this flaw out of my mind and be grateful I didn't get a device like some other threads I've found (dead pixels, dead touch zones, brightness issues, etc.) or do I complain to Google ASAP and ask for a replacement while it's still new?
Will they send me out a new device first and then make me ship this unit back or vice versa?
Click to expand...
Click to collapse
I have the exact same problem, the left side is coming out a tiny bit. when using it i cant notice it, but when i look from the side i can notice it, but its only a tiny bit. im keeping mine, i have no problems whatsoever with mine (apart from that)

I notice it all the time now that I'm aware of it. After playing with the tablet all night, it's like a tick now to check if the left side is staying down or not.
I realize this is a budget device and form factor may not have been a priority but, after choosing the 16gb version, taxes and shipping, I spent over $280 on the Nexus 7. It's not a $199 tablet.
I want to try another one but maybe only if Google Play's return policy is on the same level as Amazon where they would 2nd day air you a duplicate product with a return label. So you would have a new device before you give up the old one and wait for who knows how long for it to be serviced and returned... not to mention if you are on the hook for return shipping costs.

Send it back and hope you get one from the new batch.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

05GT said:
Send it back and hope you get one from the new batch.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Ordering just a week ago I would have thought I got the latest batch. In my googling though it looks like there is a newer version than what UPS dropped off at my door on 2012-08-31.I believe the relevant info is the SSN on my box an it is C70*
If I had bought this at a brick and morder, I would take it back and exchange it today. Since I didn't and I'm at the mercy of Google and the 3rd party call centers they've hired to handle this kind of think, I'm not sure what I should do.

LaTropa64 said:
I want to try another one but maybe only if Google Play's return policy is on the same level as Amazon where they would 2nd day air you a duplicate product with a return label. So you would have a new device before you give up the old one and wait for who knows how long for it to be serviced and returned... not to mention if you are on the hook for return shipping costs.
Click to expand...
Click to collapse
They email you the return label and RMA form to print out and let you order a free replacement (actually they place a $250 preauth charge on your card that should disappear after a few days)
You get 21 days to send back the defective unit, but the new one should arrive before then.
Sent from my Nexus 7 using Tapatalk 2

C80 has the same issue, took a C70 back yesterday pick up a new one today C80 & straight out of the box its there. I did read that by asking the back off and nipping up the screws on the LH side sorts the issue although I'm yet to try that fix.
Sent from my Nexus 7 using xda app-developers app

LaTropa64 said:
I hadn't even heard of this problem and didn't notice it until a couple hours after I had been playing with the device while I was searching in frustration how to get the drivers to root on Windows 8.
Good thing I never figured it out before I noticed the left side of the glass was sticking up just a tiny bit on my brand new Nexus 7. It's still stock If I want to return it. I can push down and hold the middle part of the left side of the screen for a few seconds and it seems to stay down for a few minutes but eventually keeps popping back up just slightly. I've searched and seen videos on youtube where some go to extreme measures of pulling the device apart and tightening screws or clamping it together for hours while leaving it playing HD movies until the battery dies and other methods way beyond those.
Do I I just try and put this flaw out of my mind and be grateful I didn't get a device like some other threads I've found (dead pixels, dead touch zones, brightness issues, etc.) or do I complain to Google ASAP and ask for a replacement while it's still new?
Will they send me out a new device first and then make me ship this unit back or vice versa?
Click to expand...
Click to collapse
Pop the back off, loosen the screws on the left side then hold the edge tight while you tighten the screws and it should take care of the separation.

alferret said:
C80 has the same issue, took a C70 back yesterday pick up a new one today C80 & straight out of the box its there. I did read that by asking the back off and nipping up the screws on the LH side sorts the issue although I'm yet to try that fix.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I also ended up with a C8 with lift on the left side, new batch doesn't resolve the issue at all, still luck of the draw whether you will get one that has issues or not.
airmaxx23 said:
Pop the back off, loosen the screws on the left side then hold the edge tight while you tighten the screws and it should take care of the separation.
Click to expand...
Click to collapse
This might work but doesn't help everybody, mine was lifting again after a little bit.

NeoMagus said:
This might work but doesn't help everybody, mine was lifting again after a little bit.
Click to expand...
Click to collapse
It isn't to fix screen lift, it's to fix the separation between the bezel and the edge of the screen.

airmaxx23 said:
It isn't to fix screen lift, it's to fix the separation between the bezel and the edge of the screen.
Click to expand...
Click to collapse
Seperation/ screen lift, is the same thing. Look at the link I posted, you can see my bezel and edge of the screen separating. If it worked for you, thats awesome like I said it worked on one of mine for a little before seperating again. It isn't a permanent fix for everyone

I hate hearing that "this is a budget device so it's just something you have to deal with." We paid $200-250 for a tablet. Not $200-250 for a tablet with the left side of the screen popping up above the bezel. The lower price point doesn't disqualify us from from returning one unit to get one that isn't defective. You are well within your rights to do so if it bothers you.

Send it back and get a replacement
Sent from my Nexus 7 using Tapatalk 2

ManBearPig618 said:
I hate hearing that "this is a budget device so it's just something you have to deal with." We paid $200-250 for a tablet. Not $200-250 for a tablet with the left side of the screen popping up above the bezel. The lower price point doesn't disqualify us from from returning one unit to get one that isn't defective. You are well within your rights to do so if it bothers you.
Click to expand...
Click to collapse
Quoted for the absolute truth. :good::good::good::good::good::good:

Wow isn't this like the one thousand thread about screen separation?
Sent from my SPH-L710 using xda premium

I have the same problem. C80...
BUT:
I really don't think that thigthening those screws or adding the missing ones is a good choice here.
If you consider that Asus leaves those screws out of the device on purpose than there can only be one reason:
To me it looks like the display is to big for the frame it might just be 0.1mm or less.
Leaving the screws out will then avoid to add pressure on the display due to pushing it into the too small frame.
That could be the reason that not every device in a batch is bad. They just have a couple of bad positions at molding where they get too tiny frames, the others are OK.
...my 2 cents...
I will keep sending mine back until I get one without missing screws.
Edit: or the two outer screws are too close together. This would even make more sense.

I have exactly the same problem with my Nexus 7. It's an C80. Otherwise the tablet just works perfect.
Is it possible that the screen can break in the future because of that separation? Had someone recognized that the gap got bigger at the C80?
Thanks for your answers.

I'd say if you don't push it down/flex the glass you will be fine.

Yes it is and it is ot covered by the warranty if the screen cracks. Ask for replacement
Sent from my Nexus 7 using Tapatalk

Just got a new one ordered. Screen issue and the WiFi is messed up. Not sure if I messed it up but the wife's n7 gets way more signal. I got a c60 from Ireland.

Hardware revision and warranty?

Hello guys,
I just went over my 14 day RMA period a few days ago.
However right now I want to exchange my device using the 1 year warranty primarily because the rattle has gotten worse. If I put my phone up to my ear or move it down the person sitting next to me can hear the rattle.
Secondly I put my phone in my jean pocket and one of the metal jean buttons put a deep scratch on it you can see that sucker a mile away! So much for gorilla glass!
Anyway my question is I have rev 11 which it looks like lg didn't mitigate the rattle or the mic static noise issue. Should I do the warranty now or wait till rev 12 is out? Also would they simply take my phone apart fix whatever is needed and send it back, meaning my pacific ocean trench deep scratch will stay? Or will they give me another device (note I'm over 14 day exchange period)? Also anyone have any idea when these flaws will be fixed?
Thanks
Sent from my Nexus 4 using xda app-developers app

_ice_ said:
Hello guys,
I just went over my 14 day RMA period a few days ago.
However right now I want to exchange my device using the 1 year warranty primarily because the rattle has gotten worse. If I put my phone up to my ear or move it down the person sitting next to me can hear the rattle.
Secondly I put my phone in my jean pocket and one of the metal jean buttons put a deep scratch on it you can see that sucker a mile away! So much for gorilla glass!
Anyway my question is I have rev 11 which it looks like lg didn't mitigate the rattle or the mic static noise issue. Should I do the warranty now or wait till rev 12 is out? Also would they simply take my phone apart fix whatever is needed and send it back, meaning my pacific ocean trench deep scratch will stay? Or will they give me another device (note I'm over 14 day exchange period)? Also anyone have any idea when these flaws will be fixed?
Thanks
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Revision versions are largely meaningless, and users bickering over something as trivial as that is pretty pointless as well. LG will almost definitely not give you a new phone as it is functioning as intended. They will certainly not fix a scratched screen as it was your fault not theirs. If anything, they might get rid of the rattle and send it back to you as it is.

There are metal buttons in the inside of your pocket? Sounds like another weak excuse to me.
Sent from my Nexus 4 using xda app-developers app

The 14 day window is a return window, not RMA. You can RMA and exchange just about anytime for warranty purposes. The rattle might be a warranty issue but the scratch will not be. I think however they'd just ship you another device while fixing your broken one which someone will then get later (after they replace the scratch also however).

abufaka said:
There are metal buttons in the inside of your pocket? Sounds like another weak excuse to me.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Really, have you seen the RMA thread? People are doing exchanges even for the slightest problems. Hell I have screen bleed, yellow screen, data drops in stock rom and 4 hours of battery life and I'm not complaining nor did I send my phone back 6 times for such purposes. I'm not making excuses for those because all of them can be fixed using kernels, application combinations or software updates (except the screen bleed which doesn't bother me at all)
Sent from my Nexus 4 using xda app-developers app

I called for an RMA around a month after having my device. I had noticed pretty substantial light bleed although I was willing to let it slide. Then I got a big scratch on the back like you, and decided to call them and take issue with the light bleed. They ship you a replacement whilst putting a hold for the cost on your credit card. Once you receive the replacement you are to ship your old phone back.
I'm hoping they don't try and charge me for the scratch although some other thread on here said they expect general wear and tear such as minor dings and scratches. If the way in which they handled everything else with this launch is any indication then I doubt they will give me any trouble for this. They probably won't even be able to tell that it was mine when they receive it lol.
Anyways I'm still waiting on the RMA to ship out but I am expecting things to go smoothly. I've ordered a screen protector for the reverse side. Can't mess up that delicious oleographic coating on the front with a screen but the back scratches more easily, plus the added friction from a rubber screen will stop it from sliding all over the place.

Ordered Chaos said:
I called for an RMA around a month after having my device. I had noticed pretty substantial light bleed although I was willing to let it slide. Then I got a big scratch on the back like you, and decided to call them and take issue with the light bleed. They ship you a replacement whilst putting a hold for the cost on your credit card. Once you receive the replacement you are to ship your old phone back.
I'm hoping they don't try and charge me for the scratch although some other thread on here said they expect general wear and tear such as minor dings and scratches. If the way in which they handled everything else with this launch is any indication then I doubt they will give me any trouble for this. They probably won't even be able to tell that it was mine when they receive it lol.
Anyways I'm still waiting on the RMA to ship out but I am expecting things to go smoothly. I've ordered a screen protector for the reverse side. Can't mess up that delicious oleographic coating on the front with a screen but the back scratches more easily, plus the added friction from a rubber screen will stop it from sliding all over the place.
Click to expand...
Click to collapse
Yep Im actually ordering my RMA tonight they sent me a link. Hopefully the new one doesn't have the rattle and static. Again it was LG's fault they made a phone with improper shielding and loose parts, so they can't deny anything. To all those bashing me I hope you understand this isn't because of a minor scratch- sure who wouldn't love a new phone. However the issues that my phone already had really pushed me towards getting a replacement. Sure I would love my scratch to be gone, but having a phone with out broken parts and a bad mic would be better. Please do not reply to this thread if you are gonna bash me. Thanks. Also to those that gave me good info. I appreciate it!
Sent from my Nexus 4 using xda app-developers app

How do you identify the hardware revision? I RMA'd one where the buzzing was horrible, and hoping I get a rev 12. Not sure what rev this one is either.

AAhrens said:
How do you identify the hardware revision? I RMA'd one where the buzzing was horrible, and hoping I get a rev 12. Not sure what rev this one is either.
Click to expand...
Click to collapse
go into bootloader mode. google on how to get there.
it says what rev it is.

AAhrens said:
How do you identify the hardware revision? I RMA'd one where the buzzing was horrible, and hoping I get a rev 12. Not sure what rev this one is either.
Click to expand...
Click to collapse
Volume up+ power button and you should be able to see the rev. Rev_12 is non existent rev_11 is the latest you will get.
Anyways my second RMA is near perfect.
No mic static
Rattling is minimal
And the screen is great, yellowing went away I do have a nominal binned CPU but it really doesn't phase me since I do not tweak voltage settings anyway.
Sent from my Nexus 4 using xda app-developers app

Thanks guys. Appears I have rev 11. It was volume down + power button by the way. My new RMA replacement should be in next week, hopefully it has fixed the speaker popping/static. That's about the only issue I have, btu drives me nuts when I'm using it as a phone.

This many be the last straw for me.

I noticed this after i used it for a few days, it happens RIGHT where it gets hot on the back, it sticks to something inside and then comes off, hence the click/sticky sound. This is ridiculous. Anyone else have this issue?
https://www.youtube.com/watch?v=uvM86LO6Fdo&list=UUh0w9UCsW4rJNRvOxLwV9qQ
On the phone with HTC, they tried to turn it into something I DAMAGED on the device, i wasn't having that. They shuffled me off to the tech support and there i demanded to speak to a supervisor. Finally I got an RMA and shipping instructions. Shipping this guy back tomorrow, so so so mad and disappointed at this device.

reinert012 said:
I noticed this after i used it for a few days, it happens RIGHT where it gets hot on the back, it sticks to something inside and then comes off, hence the click/sticky sound. This is ridiculous. Anyone else have this issue?
On the phone with HTC, they tried to turn it into something I DAMAGED on the device, i wasn't having that. They shuffled me off to the tech support and there i demanded to speak to a supervisor. Finally I got an RMA and shipping instructions. Shipping this guy back tomorrow, so so so mad and disappointed at this device.
Click to expand...
Click to collapse
same here at the same spot. I think I will RMA tomorrow

Not happening here, thank goodness. I have the very same model, granted just had it for 1 day (and not planning on "keep exploring" until I might actually reproduce the issue). :fingers-crossed:

Same issue new 32 gb white just got it hours ago. Also it is taking 10 hours to charge... really?

Now I finally understand what everyone means by a clicking sound... I'm on a black 32,nothing at all like that. Bummer bro

That definitely sounds like a defect. Thank God mine doesn't make that sound.

I bet after it gets really hot it might be melting something structural in the back. I don't have the issue, but maybe I haven't warmed it up enough.
Sent from the future...

The mine doesn't make that sound

I noticed that mine made the same noise, but it sounds like some adhesive is trying to stick, but is not strong enough. That would also explain why the sound comes when letting go instead of when pressing the device. So I pressed the back firmly. Now the sound is gone and I think the flex has become smaller too (could be placebo)
Message has been Baconized

I agree with Gormsen. Sounds like double sided tape that is just not sticking. The back seem super thin and that probably all that keeps it flat in the middle. I do have the flex but no noise yet...

It must be some adhesive melting when it gets hot, which causes it to unstick.. pretty pathetic.

jaju123 said:
It must be some adhesive melting when it gets hot, which causes it to unstick.. pretty pathetic.
Click to expand...
Click to collapse
Or, it could be that it's thoroughly pressed upon manufacturing. Pathetic? Nah, all products have some production errors.
The good thing is that we should be able to fix this, if we pull of the back cover, apply some stronger double sided tape and the put the back cover back.
We can do some hardware modifications, am I the only one who's excited about it?
Also with the extra space (due to the flexing) we will be able to fit a bigger battery, if one is made
Message has been Baconized

Gormsen said:
I noticed that mine made the same noise, but it sounds like some adhesive is trying to stick, but is not strong enough. That would also explain why the sound comes when letting go instead of when pressing the device. So I pressed the back firmly. Now the sound is gone and I think the flex has become smaller too (could be placebo)
Message has been Baconized
Click to expand...
Click to collapse
Not placebo. Mine was very bad to begin with. Several places on the back could be pressed in with a light finger and under the camera I had that sticky click. I did as you and literally pressed the tablet together firmly at all places. During this process there were several clicks as if the whole thing settled properly. Result. Zero flex and it now feels totally solid all around the back. I'm totally happy with it now since I have no noticeable lightbleed and everything works as expected. Good times! ?

Laz35 said:
Not placebo. Mine was very bad to begin with. Several places on the back could be pressed in with a light finger and under the camera I had that sticky click. I did as you and literally pressed the tablet together firmly at all places. During this process there were several clicks as if the whole thing settled properly. Result. Zero flex and it now feels totally solid all around the back. I'm totally happy with it now since I have no noticeable lightbleed and everything works as expected. Good times! ?
Click to expand...
Click to collapse
Sweet Ladies and gentlemen.. We have a cure
Anybody else who can confirm this?
Message has been Baconized

Gormsen said:
Sweet Ladies and gentlemen.. We have a cure
Anybody else who can confirm this?
Message has been Baconized
Click to expand...
Click to collapse
I noticed the sound when i unboxed it. Have tried to do so. But seems like my stick is not strong enough, and the sound remains. If this is really a stick issue. Then maybe try to heat it up and push the back hard to stick properly may solve the problem. Anyway I have initiated RMA so really dont want to fix it lol. fingercrossed to get a good device.

This isn't really anything new as my Nexus 7 was the same back in 2012. I gave it a good squeeze and its still creak free to this day. I did the same with my Nexus 9 and can confirm that I don't have any creaking, although mine didn't have that much creaking to begin with anyway.
Sent from my Nexus 9 using Tapatalk

I'm glad the op doesn't have the nexus 9 anymore.

chefdave12118 said:
I'm glad the op doesn't have the nexus 9 anymore.
Click to expand...
Click to collapse

Hi
reinert012 said:
I noticed this after i used it for a few days, it happens RIGHT where it gets hot on the back, it sticks to something inside and then comes off, hence the click/sticky sound. This is ridiculous. Anyone else have this issue?
https://www.youtube.com/watch?v=uvM86LO6Fdo&list=UUh0w9UCsW4rJNRvOxLwV9qQ
On the phone with HTC, they tried to turn it into something I DAMAGED on the device, i wasn't having that. They shuffled me off to the tech support and there i demanded to speak to a supervisor. Finally I got an RMA and shipping instructions. Shipping this guy back tomorrow, so so so mad and disappointed at this device.
Click to expand...
Click to collapse
Yes the exact same thing happens here, I've not played any games or had the device become hot, just expect it was like it from the start. This is typical HTC build quality, reminds me very much of the HTC One X and it's plastic back, just all done a bit cheaply.
In the iFixIt pictures there doesn't appear to be any sticky pads in the location this is happening, so it is probably just sticking unintentionally to the smooth plastic of the stick on NFC antenna in that location. As the whole back cover seems to default to be floating away from the internal chassis by a couple of millimetres, again typical HTC lack of attention to detail, then the back is going to do this, become depressed and sometimes stick to pop out again making a noise.
I'll personally live with it, it is a bit annoying, and I'd expected better at this price point, but it doesn't affect the functionality.
Regards
Phil

Firm press between both hands is the fix. You will hear and feel it lock. There are back clips that are not seated. Mine is solid and click/creak free now.

Red 64 gig turbo!

my red battery cover showed up today. I love the ballistic nylon, but the fraying was sending my OCD into overdrive lol case anybody was wondering, as most would figure that fits the 64 gig version perfectly. With the black power and volume keys it actually looks better than the factory version I think. I'll post some pics later when I have a second camera available.

Nice! Did the adhesive make it difficult to remove the original back?

Where did you buy it?

I trust you're going to share a pic or two with us... Congrats!

Yes I would like to see some pictures. Was it hard to get the back off? Does it adhere to the back alright? Did it come with led's for the flash?

I don't get threads like this. Why even start the thread if you have no pictures or information to share?! It's like when someone says they got something great to tell you and then says, "hey, I'll call you back". #epicthreadfail.

Take phone into bathroom. Use mirror. Done.

rx2mazda said:
I don't get threads like this. Why even start the thread if you have no pictures or information to share?! It's like when someone says they got something great to tell you and then says, "hey, I'll call you back". #epicthreadfail.
Click to expand...
Click to collapse
Lol ya. I got over excited. I'll post some tonight with my Wifes phone .
So about the adhesive. No its not to hard. The top corner clips are the hardest part. Its hard to get them to pop loss and I was worried about damaging the frame.
I ordered it from eBay. Google droid turbo battery cover, it should pop up in shopping. Mine was 25 but I saw one for 19 yesterday.
The fit is really tight and clean. I have to admit, I never looked at the mgf models because I wanted 64 gigs. But wow it feels great in the hand. I am so pleased with it! My only concern is how it holds up. The bn is pretty much scratch proof. The mfg model is basically Kevlar with a soft touch clear coat. But that's OK, I ordered another one as a backup. I also ordered a second bn back to experiment with. I want to try and remove the bn and try leather! But that's a another project.

zathus said:
Lol ya. I got over excited. I'll post some tonight with my Wifes phone .
So about the adhesive. No its not to hard. The top corner clips are the hardest part. Its hard to get them to pop loss and I was worried about damaging the frame.
I ordered it from eBay. Google droid turbo battery cover, it should pop up in shopping. Mine was 25 but I saw one for 19 yesterday.
The fit is really tight and clean. I have to admit, I never looked at the mgf models because I wanted 64 gigs. But wow it feels great in the hand. I am so pleased with it! My only concern is how it holds up. The bn is pretty much scratch proof. The mfg model is basically Kevlar with a soft touch clear coat. But that's OK, I ordered another one as a backup. I also ordered a second bn back to experiment with. I want to try and remove the bn and try leather! But that's a another project.
Click to expand...
Click to collapse
Understandable. ?
I might be interested in this but I'd have to see your pics. I kinda like the black ballistic nylon, but your description sounds cool.

Speaking of battery covers, I never knew there's a blue nylon one.
http://www.ebay.ca/itm/blue-Housing...e_Replacement_Parts_Tools&hash=item3f443be6fb
There's a lot of them for around $22USD on aliexpress.

pics =)

Fun fact! The bn turbo is also made of Kevlar... Interesting...

Looks good but I want to find one without the verizon logo if possible

zathus said:
pics =)
Click to expand...
Click to collapse
What kind of adhesive did you use to put the charging pad back on?

turk2333 said:
What kind of adhesive did you use to put the charging pad back on?
Click to expand...
Click to collapse
If you talking about that black rubber pad in the teardown video. That's just a guard to protect the charging coil from the battery cover. In the tear down video the guy made it seem like you have to be very careful with that. It's just a piece of rubber. And I actually detact the side of it facing the back plate. So that it only stuck to the phone. I used lint lol
That's actually a good point. So, if you end up doing this. When you take the back plate off, That black piece of rubber that's protecting the coil. You're going to want to make sure that not sticky on the part facing the battery cover. Once you remove the back plate the adhesive strength of it is going to be weaker. So if you don't make it not sticky, when you put the phone back together everytime you touch that spot it could make a noise and be quite irritating. Plus I'm not sure if the curvature between the two battery covers is the exact same.

zed011 said:
Looks good but I want to find one without the verizon logo if possible
Click to expand...
Click to collapse
Not possible. There is no international red version, so therefore there is no red version without the Verizon logo. I don't know how hard it would be to remove. I think its laser etched. I was actually giving that a thought.. How I can remove it lol

zathus said:
pics =)
Click to expand...
Click to collapse
Looks good in red.

zathus said:
my red battery cover showed up today. I love the ballistic nylon, but the fraying was sending my OCD into overdrive lol case anybody was wondering, as most would figure that fits the 64 gig version perfectly. With the black power and volume keys it actually looks better than the factory version I think. I'll post some pics later when I have a second camera available.
Click to expand...
Click to collapse
Your BN was fraying? That's not giving me the warm fuzzies. Maybe I should get the red back instead of the blue BN. Something so I can tell my phone from my wife's.
Sent from my phone via TapaTalk
---------- Post added at 12:11 AM ---------- Previous post was at 12:09 AM ----------
rx2mazda said:
I don't get threads like this. Why even start the thread if you have no pictures or information to share?! It's like when someone says they got something great to tell you and then says, "hey, I'll call you back". #epicthreadfail.
Click to expand...
Click to collapse
I don't get posts like this. It's the OEM red Kevlar back. It should look exactly like the red turbo you'd get at Verizon. Pics were nice but not needed.
Sent from my phone via TapaTalk

wingdo said:
Your BN was fraying? That's not giving me the warm fuzzies. Maybe I should get the red back instead of the blue BN. Something so I can tell my phone from my wife's.
Sent from my phone via TapaTalk
---------- Post added at 12:11 AM ---------- Previous post was at 12:09 AM ----------
I don't get posts like this. It's the OEM red Kevlar back. It should look exactly like the red turbo you'd get at Verizon. Pics were nice but not needed.
Sent from my phone via TapaTalk
Click to expand...
Click to collapse
Yeah. In one spot it was fraying. Not super bad. My wife always told me I was seeing things lol so it was that minimal. I'm just really ocd on phones.

zathus said:
Yeah. In one spot it was fraying. Not super bad. My wife always told me I was seeing things lol so it was that minimal. I'm just really ocd on phones.
Click to expand...
Click to collapse
I'd love to go to the red cover so I can use one of the magnetic car mounts. Are there instructions on taking the back off?
Edit: I picked up the red one for $19 on eBay. after I saw the teardown video. Seems stupidly easy to replace. Can't wait to get this so I can install a ProClip car mount for the Turbo. I love the BN back, but the fact very little works with it makes it useless IMO.

QC issue? Top Speaker grill is messed up.

So, I received my MXP yesterday... In all the joy of playing with the software and updating it, I didn't notice this until this morning? The top speaker grill is sticking up on the right side? It's not loose, but still sticking up. Anyone else have this issues or other QC issues?
I felt funny requesting a replacement for something this minor, but Amazon is sending me one .....But it's gonna take 2 weeks to get it I just don't think my OCD can handle this, so glad it's getting replaced.
Sorry for the blurry pic, I only have a cheap pre-paid phone to take the pic with.

Ooh, yeah I couldn't deal with that either. Seem so Ike's or might be the first to post something like this, so hopefully it's not very common. Glad you're getting a replacement though!

On the Nexus 6 and the 2nd gen Moto X, those grills were removable since they were one of the parts that could be customized in Moto Maker. It may have just popped loose. You should be able to snap it back in. Might take a bit of force, but it should go back in.

Both mine are sticking out they don't seem evenly meaning top vs bottom, I wouldn't worry to much they will prob get pushed in just from being in ur pocket or what ever as long sound still works its all good
Sent from my XT1575 using Tapatalk
---------- Post added at 01:29 AM ---------- Previous post was at 01:28 AM ----------
Here's my fear of replacing minor things, maybe the next device will have something worse lol just a fear
Sent from my XT1575 using Tapatalk

Omen87 said:
On the Nexus 6 and the 2nd gen Moto X, those grills were removable since they were one of the parts that could be customized in Moto Maker. It may have just popped loose. You should be able to snap it back in. Might take a bit of force, but it should go back in.
Click to expand...
Click to collapse
Well crap!
I tried snapping it back in (didn't push hard at all) and I heard it snap, took my finger off it and the part fell on the floor. I sat it back in there, but it's really loose now and probably will fall out if I bump it or hit it on my pocket when pulling it out.
The replacement can't get here soon enough

Is that piece plastic or metal?

tylerwatt12 said:
Is that piece plastic or metal?
Click to expand...
Click to collapse
Feels like aluminum?

tele_jas said:
Well crap!
I tried snapping it back in (didn't push hard at all) and I heard it snap, took my finger off it and the part fell on the floor. I sat it back in there, but it's really loose now and probably will fall out if I bump it or hit it on my pocket when pulling it out.
The replacement can't get here soon enough
Click to expand...
Click to collapse
Wow, that is REALLY jacked up! Good you already requested a replacement.
Sent from my Nexus 10 using Tapatalk

Darnell_Chat_TN said:
Wow, that is REALLY jacked up! Good you already requested a replacement.
Sent from my Nexus 10 using Tapatalk
Click to expand...
Click to collapse
Also good to hear that Moto seems to be OK with replacing stuff like this. Hope mine comes in looking straight, I can't stand build quality issues like that.

In the mean time, I put a REALLY SMALL drop of super glue on it to hold it in so I don't lose it/doesn't fall out....It's still lop-sided though. Hope this doesn't mess up my return when they get it back!?!?!