I9505 - No sound, no calls, no video - Galaxy S 4 Q&A, Help & Troubleshooting

Hi,
I've had som rough weeks with my GS4 I9505. Hopefully some of you can help me.
I'm running CM11 nightlies, which was doing pretty great, until 3 weeks ago, where the media sound disappeared.
Well actually, I found out that the media sound WAS playing, but it was SUPER low. I had to put the volume at max and lay my ear directly on the speaker to hear it just a bit.
I read that a couple of others had the same problem, or at least I thought so, but now I tend more to think that my problem is/was hardware related.
Anyway, I tried flashing a lot of different firmwares, to match the bootloader and so on.
I am currently on:
Bootloader: I9505XXUFNB9
Baseband: I9505XXUFNB9
PDA/CSC: BLANK
The latest stock Samsung firmware I flashed, was: I9505XXUFNB9_I9505NEEFNB2_NEE
I am from Denmark and my phone is unbranded.
When I did that, the phone got VERY slow and wifi didn't work. Then I flashed CM11 again and wifi worked.
But now I am totally unable to make calls, it just freezes up and finally makes the call, but the call-speaker, media-speaker and microphone doesn't work.
When I try playing video (and some games) the specific app freezes and crashes too.
If I at least could get back to where my call-speaker/microphone worked and I had super-low audio I'd be ever so happy, 'cause then I can go and get a new media-speaker.
I hope someone can help me, otherwise I'll have to trash this phone, which I've been pretty happy to use for a while now.
Any pointers will do!
Thank you in advance.

Do you have an all working backup?
"If someone helps, never forget to hit thanks ? "

DeepankarS said:
Do you have an all working backup?
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
That's what I'm running on now - A backup before all this..
But, as the bootloader and modem has changed, it still isn't working, sadly.

Neo3000x said:
That's what I'm running on now - A backup before all this..
But, as the bootloader and modem has changed, it still isn't working, sadly.
Click to expand...
Click to collapse
@Lennyz1988 @MAX 404 Any ideas?
"If someone helps, never forget to hit thanks ? "

Nobody?
I guess I'll have to go back to my faithfull SIII

DeepankarS said:
@Lennyz1988 @MAX 404 Any ideas?
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
Neo3000x said:
Nobody?
I guess I'll have to go back to my faithfull SIII
Click to expand...
Click to collapse
Hi mate , hi DeepankarS
Seem like two different problems here.....
the low volume may be a hardware problem , the speaker gone bad , if you can hear fine with your earphones i would say is a speaker problem...really easy to replace btw.
the other problems showed up after flashing so i asume they come from bad flashing........backup , also efs folder , do a factory reset and flash stock again.......what recovery you have ? the important thing is to leave the phone clean before you flash with Odin

MAX 404 said:
Hi mate , hi DeepankarS
Seem like two different problems here.....
the low volume may be a hardware problem , the speaker gone bad , if you can hear fine with your earphones i would say is a speaker problem...really easy to replace btw.
the other problems showed up after flashing so i asume they come from bad flashing........backup , also efs folder , do a factory reset and flash stock again.......what recovery you have ? the important thing is to leave the phone clean before you flash with Odin
Click to expand...
Click to collapse
Hi MAX 404
Yea, they started when flashing new bootloader and modem.
I'll try that in the morning (again) - It's quite late here.
I'm on Philz at the moment.
So, the phone should be totally clean before flashing with Odin? I don't think I did that last time actually
What firmware should I flash? The same as last time?

Neo3000x said:
Hi MAX 404
Yea, they started when flashing new bootloader and modem.
I'll try that in the morning (again) - It's quite late here.
I'm on Philz at the moment.
So, the phone should be totally clean before flashing with Odin? I don't think I did that last time actually
What firmware should I flash? The same as last time?
Click to expand...
Click to collapse
Download the latest 4.4.2 for your phone and then in odin, uncheck auto reboot.
After flashing keep the phone off for 30seconds plus and then turn it on
"If someone helps, never forget to hit thanks ? "

DeepankarS said:
Download the latest 4.4.2 for your phone and then in odin, uncheck auto reboot.
After flashing keep the phone off for 30seconds plus and then turn it on
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
Well actually I don't know which one is the latest.
I'm from Denmark, which isn't listed on sammobile.com - Anyway, the last firmware I flashed was I9505XXUFNB9_I9505NEEFNB2_NEE
Should this be fine to try again (again...) or is there a new one for my phone?

Neo3000x said:
Well actually I don't know which one is the latest.
I'm from Denmark, which isn't listed on sammobile.com - Anyway, the last firmware I flashed was I9505XXUFNB9_I9505NEEFNB2_NEE
Should this be fine to try again (again...) or is there a new one for my phone?
Click to expand...
Click to collapse
Dowbload any october/september build without carrier locking.
AFAIK, there was this UK one of October. You can try that
Also there is an Ireland one without carrier locking
AND IF YOU ARE ROOTED AS OF NOW, BACKUP EFS BEFORE FLASHING.
Use a good rated efs backup app from the playstore.
"If someone helps, never forget to hit thanks ? "

Neo3000x said:
Hi MAX 404
Yea, they started when flashing new bootloader and modem.
I'll try that in the morning (again) - It's quite late here.
I'm on Philz at the moment.
So, the phone should be totally clean before flashing with Odin? I don't think I did that last time actually
What firmware should I flash? The same as last time?
Click to expand...
Click to collapse
Hi ,
you have two options , factory reset and clean to install a new rom , try them both
Also would not hurt to mounts and storage menu/ format data and /datamedia ( /sdcard) that is your internal SDcard so is really clean....but after that you need to have a custom rom in the externalSD or go to download mode and flash with odin ....
Same rom as before should be fine....or download it again just to make sure is ok
BAckup first!! efs folder also.

DeepankarS said:
Dowbload any october/september build without carrier locking.
AFAIK, there was this UK one of October. You can try that
Also there is an Ireland one without carrier locking
AND IF YOU ARE ROOTED AS OF NOW, BACKUP EFS BEFORE FLASHING.
Use a good rated efs backup app from the playstore.
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
The only one I see as "unbranded" is from Ireland, as you're saying.
Should I try flashing this?
http://www.sammobile.com/firmwares/download/38024/I9505XXUGNG8_I9505TSIGNG1_TSI.zip/
The only thing I'm worried about is this: CSC: I9505TSIGNG1, as it looks kinda branded to me.
MAX 404 said:
Hi ,
you have two options , factory reset and clean to install a new rom , try them both
Also would not hurt to mounts and storage menu/ format data and /datamedia ( /sdcard) that is your internal SDcard so is really clean....but after that you need to have a custom rom in the externalSD or go to download mode and flash with odin ....
Same rom as before should be fine....or download it again just to make sure is ok
BAckup first!! efs folder also.
Click to expand...
Click to collapse
I'll just format "everything" when it comes to it - And backup first ofc.

Neo3000x said:
The only one I see as "unbranded" is from Ireland, as you're saying.
Should I try flashing this?
http://www.sammobile.com/firmwares/download/38024/I9505XXUGNG8_I9505TSIGNG1_TSI.zip/
The only thing I'm worried about is this: CSC: I9505TSIGNG1, as it looks kinda branded to me.
I'll just format "everything" when it comes to it - And backup first ofc.
Click to expand...
Click to collapse
@MAX 404 meant do backup the EFS folder.
And you can select the area of firmware from here
http://www.sammobile.com/firmwares/database/
"If someone helps, never forget to hit thanks ? "

DeepankarS said:
@MAX 404 meant do backup the EFS folder.
And you can select the area of firmware from here
http://www.sammobile.com/firmwares/database/
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
Yea I know
I searched for Ireland, there's one from October, should this be fine?
This one: http://www.sammobile.com/firmwares/download/38024/I9505XXUGNG8_I9505TSIGNG1_TSI.zip/
I see that the one I flashed last time is for Nordic countries (where Denmark is) - But it is from February, so pretty old...

Neo3000x said:
Yea I know
I searched for Ireland, there's one from October, should this be fine?
This one: http://www.sammobile.com/firmwares/download/38024/I9505XXUGNG8_I9505TSIGNG1_TSI.zip/
I see that the one I flashed last time is for Nordic countries (where Denmark is) - But it is from February, so pretty old...
Click to expand...
Click to collapse
You can flash any
I am from India on a russian firmware with a turkish CSC
So it really doesnt matter till it isnt carrier locked.
"If someone helps, never forget to hit thanks ? "

Okay... I flashed I9505XXUGNG8_I9505TSIGNG1_TSI.zip
Currently on Stock Samsung 4.4.2, but it is running slow, without wifi, the vibration is all wrong (small, random bursts of vibration all the time).
Should I try flashing CM11, or just give up?

Neo3000x said:
Hi,
I've had som rough weeks with my GS4 I9505. Hopefully some of you can help me.
I'm running CM11 nightlies, which was doing pretty great, until 3 weeks ago, where the media sound disappeared.
Well actually, I found out that the media sound WAS playing, but it was SUPER low. I had to put the volume at max and lay my ear directly on the speaker to hear it just a bit.
I read that a couple of others had the same problem, or at least I thought so, but now I tend more to think that my problem is/was hardware related.
Anyway, I tried flashing a lot of different firmwares, to match the bootloader and so on.
I am currently on:
Bootloader: I9505XXUFNB9
Baseband: I9505XXUFNB9
PDA/CSC: BLANK
The latest stock Samsung firmware I flashed, was: I9505XXUFNB9_I9505NEEFNB2_NEE
I am from Denmark and my phone is unbranded.
When I did that, the phone got VERY slow and wifi didn't work. Then I flashed CM11 again and wifi worked.
But now I am totally unable to make calls, it just freezes up and finally makes the call, but the call-speaker, media-speaker and microphone doesn't work.
When I try playing video (and some games) the specific app freezes and crashes too.
If I at least could get back to where my call-speaker/microphone worked and I had super-low audio I'd be ever so happy, 'cause then I can go and get a new media-speaker.
I hope someone can help me, otherwise I'll have to trash this phone, which I've been pretty happy to use for a while now.
Any pointers will do!
Thank you in advance.
Click to expand...
Click to collapse
Unroot ur phone and send for service
Sent from my GT-I9505 using XDA Free mobile app

PR3DATOR Aaron said:
Unroot ur phone and send for service
Sent from my GT-I9505 using XDA Free mobile app
Click to expand...
Click to collapse
Probably not.. KNOX is broken and the phone had a... rough life

Now on CM11 nightly.. Smooth as always, but still without sound - But with wifi..

Neo3000x said:
Now on CM11 nightly.. Smooth as always, but still without sound - But with wifi..
Click to expand...
Click to collapse
Then your hardware is dead. You already had low sound.
Get a speaker replacement and google this
Galaxy s4 teardown ifixit.com amd follow the steps to fix your speaker. Hardly takes 10 minutes.
Edit : Wait sound as in no audio in all the speakers?
"If someone helps, never forget to hit thanks ? "

Related

Can someone please help a non techy flash to JPY ?

I am on the 3 Network(UK), my phone is branded, no lagfix, no root, im on froyo 2.2 oficial upgrade through kies.
Can someone please give me a simple step by step guide on how to upgrade to the JPY 2.2.1 firmware please, i have the 3 button recovery option btw.
Thank you in advance.
Simple: flash with odin (read the stickies...)
Simpler: apply Kies registry hack http://forum.xda-developers.com/showthread.php?t=835628&highlight=kies+registry+hack Product Code XEU
GMH24 said:
Simple: flash with odin (read the stickies...)
Simpler: apply Kies registry hack http://forum.xda-developers.com/showthread.php?t=835628&highlight=kies+registry+hack Product Code XEU
Click to expand...
Click to collapse
I'd go for a custom rom jpy based like docs or darkys and install through clockwork or you can go to samfirmware to download jpy and use odin to flash it up to you or just do as above and use patcher but jpy is definetly worth it.
The first time i tried the kies patch utility i got a messags saying there were more than 1 phone folders which threw me a bit, but managed to sort it in the end.
So now on ....
2.2.1
I9000xxjpy
2.6.32.9
[email protected] #1
froyo.xxjpy
Whoooohhooooooooo
Would you please share how you did it
jaytwo said:
The first time i tried the kies patch utility i got a messags saying there were more than 1 phone folders which threw me a bit, but managed to sort it in the end.
So now on ....
2.2.1
I9000xxjpy
2.6.32.9
[email protected] #1
froyo.xxjpy
Whoooohhooooooooo
Click to expand...
Click to collapse
Hi Jaytwo,
I have the same rom version as you on 3UK. I'm also trying to upgrade to 2.2.1. Could you please share you you did the upgrade. what values do i need to select from the registry patcher.
Thanks in advance for you help.
Kayno9 said:
Hi Jaytwo,
I have the same rom version as you on 3UK. I'm also trying to upgrade to 2.2.1. Could you please share you you did the upgrade. what values do i need to select from the registry patcher.
Thanks in advance for you help.
Click to expand...
Click to collapse
Hi Kayno
Set the "Enable Spoof" to True
Set "Spoof product code as" to XEU from the list
Then click on the Write Regstry button in the bottom right
Thats all you have to do, then voila when you start kies and connect your phone you should have a popup saying a firmware upgrade is available.
Good luck
jaytwo said:
Hi Kayno
Set the "Enable Spoof" to True
Set "Spoof product code as" to XEU from the list
Then click on the Write Regstry button in the bottom right
Thats all you have to do, then voila when you start kies and connect your phone you should have a popup saying a firmware upgrade is available.
Good luck
Click to expand...
Click to collapse
Thanks for the prompt repy Jaytwo.
I'll have a go and keep you updated.
jaytwo said:
Hi Kayno
Set the "Enable Spoof" to True
Set "Spoof product code as" to XEU from the list
Then click on the Write Regstry button in the bottom right
Thats all you have to do, then voila when you start kies and connect your phone you should have a popup saying a firmware upgrade is available.
Good luck
Click to expand...
Click to collapse
Also did you save the Rom through Kies. Was a bit confused when i read this part on the Kies Registry patcher thread.
By the way hows your experience with the new firmware been so far. Is 3G and WIFI working correctly. Have you tried the app market. Hows the overall speed of the phone and is gps working better now.
Sorry for all these questions but i just wanted to determine whether the risk of updating is worth it.
cheers
Thanks
Kayno9 said:
Also did you save the Rom through Kies. Was a bit confused when i read this part on the Kies Registry patcher thread.
By the way hows your experience with the new firmware been so far. Is 3G and WIFI working correctly. Have you tried the app market. Hows the overall speed of the phone and is gps working better now.
Sorry for all these questions but i just wanted to determine whether the risk of updating is worth it.
cheers
Thanks
Click to expand...
Click to collapse
No, i didnt save the Rom, 3g and Wifi are working fine but you will lose the My3 app because you will be basicly debranding your fone(if you are on contract), but if you start the default browser it takes you direct to My3 .
Havnt tried GPS , dont use it tbh.
The speed of the phone is so much smoother imo, im so glad i upgraded.
Hope that helps
jaytwo said:
No, i didnt save the Rom, 3g and Wifi are working fine but you will lose the My3 app because you will be basicly debranding your fone(if you are on contract), but if you start the default browser it takes you direct to My3 .
Havnt tried GPS , dont use it tbh.
The speed of the phone is so much smoother imo, im so glad i upgraded.
Hope that helps
Click to expand...
Click to collapse
Thats great news. Can you still use the three services though? Because i'm paying a lot of money for contract don't want to be losing my data allowance
Thanks for help again. I'm about to flash it. Fingers crossed.
Kayno9 said:
Thats great news. Can you still use the three services though? Because i'm paying a lot of money for contract don't want to be losing my data allowance
Thanks for help again. I'm about to flash it. Fingers crossed.
Click to expand...
Click to collapse
Jaytwo,
My installation failed. Did you manage to flash it on the first go. I did exactly as you said. The thing is it finishes downloading in about 15 mins then fails installation. I also had the multiple folder detected problem. I clicked on ok on the registry patcher to delete the folder and re-started keys with the sgs connected.
The phone disconnects and after about couple of minutes is says Failed to convert to upgrade mode. Please try later.
Does anyone else know how to fix this? Am i doing anything wrong
thanking you in advance
Yes it flashed first time for me.
When the phone disconnected did you do anything?
I noticed when i flashed that the phone disconnected but i didnt touch anything and left it to carry on, it took a while but all went well in the end.
Try flashing again, just to check do you have the 3 button recovery option on your phone?
jaytwo said:
Yes it flashed first time for me.
When the phone disconnected did you do anything?
I noticed when i flashed that the phone disconnected but i didnt touch anything and left it to carry on, it took a while but all went well in the end.
Try flashing again, just to check do you have the 3 button recovery option on your phone?
Click to expand...
Click to collapse
Hi Jaytwo,
I have not touched the phone when it disconnected as i remember from a previous upgrade to Froyo from Eclaire when it disconnected and then reconnected before completing the upgrade.
I have the 3 button recovery i checked it. The wierd thing is the phone did not reboot to downloading mode where the yellow android digging man picture appears. The phone stays as it is. I wonder whether samsung changed anything recently.
kingconnought, on the main registry patcher thread also mentioned he is experiencing the same problem.
Can anyone else help.
Thanks again
I dont understand why your phone will not go into download mode as that is part of the flashing process.
Try doing a factory reset through settings on your phone, then try flashing again, apart from that im not sure what else you can do apart from flashing thru odin?
jaytwo said:
I dont understand why your phone will not go into download mode as that is part of the flashing process.
Try doing a factory reset through settings on your phone, then try flashing again, apart from that im not sure what else you can do apart from flashing thru odin?
Click to expand...
Click to collapse
Thanks Jaytwo,
I will try factory restting. See if is works although i will have to go throught the pain of reinstalling all apps again.
By the way did you lose all your apps and data after the upgrade?
Kayno9 said:
By the way did you lose all your apps and data after the upgrade?
Click to expand...
Click to collapse
No, thats the reason i wanted to upgrade thru kies as it keeps all your settings and apps, the only app i lost was the My3 one.
Hope its second time lucky for ya
jaytwo said:
No, thats the reason i wanted to upgrade thru kies as it keeps all your settings and apps, the only app i lost was the My3 one.
Hope its second time lucky for ya
Click to expand...
Click to collapse
LOL... This will be my 5th time.
By the way i thought il tell you this. If you ever want to for God knows whatever reason re-brand your phone to 3 then select the H3G product code and it should Flash your phone to the latest 3 branded Froyo which is JP5.
If i have to resort to Odin then i might as well wait for 3 to update their version to 2.2.1 as im too scared to Flash via Odin as there is too many risks associated with it. Or who knows Samsung may decide to release another version which might work.
Thanks
I got a quick question about this subject. Ik have no experience without android firmware flashing. Do ik need to backup stuff like imei number? For when the **** hits the fan. And if so how do ik do that?
*edit
found the answer to my own question here: http://forum.xda-developers.com/showthread.php?t=723596
Sent from my GT-I9000 using XDA App
jaytwo said:
No, thats the reason i wanted to upgrade thru kies as it keeps all your settings and apps, the only app i lost was the My3 one.
Hope its second time lucky for ya
Click to expand...
Click to collapse
not a good idea anyway.. there are a multitude of issues after upgrading os and not doing a factory reset...
Kayno9 said:
LOL... This will be my 5th time.
By the way i thought il tell you this. If you ever want to for God knows whatever reason re-brand your phone to 3 then select the H3G product code and it should Flash your phone to the latest 3 branded Froyo which is JP5.
If i have to resort to Odin then i might as well wait for 3 to update their version to 2.2.1 as im too scared to Flash via Odin as there is too many risks associated with it. Or who knows Samsung may decide to release another version which might work.
Thanks
Click to expand...
Click to collapse
Jaytwo,
It was 5th time lucky thanks to your recommendation to factory reset the phone. i factory set the phone again after upgrade and it is taking off like a rocket. Still yet to check everything but i have lost access to My3 as you said. I will let you know if i can manage to get access again.
Thanks for all your help mate. I apreciate it

[Q] i9505 - No reception, black screenfreeze, no sound

Hey all, i got this serious problem.
I've flashed most of the cutom roms right after buying the phone but at some moment i decided i wanted to return to stock again as the phone was behaving weird. I did, was a TNL 4.3 dutch stock rom. After some months i began to encounter no reception problems, it first started once a week for a whole day then it was 3 days problems 1 day reception. I then decided to flash a new 4.4 custom rom to see if it solves the issue but it didnt, i tried to flash a 4.3 rom and then the no sound/black screen/ phone dialer freezes started to occur. I flashed the 4.4 UFNA1 modem, it still persists, i flashed the nightly 4.4 rom and reflashed the UFNA1 modem twice (which was done correctly) and i still have no sound etc... What am i doing wrong here? I feel terrible as i also have no warranty left ofcourse.. Btw. I tried flashing to several stock roms by ODIN which coused the program to freeze and the phone went into a bootloop, which could be fixed by just flashing a custom recovery, and after that ofcourse a custom rom.. Very strange! Someone has an idea??
thanks
Can anyone help me?
kilkil said:
Can anyone help me?
Click to expand...
Click to collapse
Download and extract this file then flash the .Tar file via odin by selecting CP
Repulsa said:
Download and extract this file then flash the .Tar file via odin by selecting CP
Click to expand...
Click to collapse
It actually worked. Thanks!
There's only this thing, which i can't test atm, but the sim reception problem i talked about, will that be fixed too?? That's the biggest issue and iv've read a lot about it on the net, nobody could seem to fix it. Lots of em said it was an internal error which got fixed by their warranty (they say they got new phones, up till 3 times..) They tried replacing sim/sd bay which didn't solve a thing. Anyone else experiencing this problem and got it fixed??
thanks
kilkil said:
It actually worked. Thanks!
There's only this thing, which i can't test atm, but the sim reception problem i talked about, will that be fixed too?? That's the biggest issue and iv've read a lot about it on the net, nobody could seem to fix it. Lots of em said it was an internal error which got fixed by their warranty (they say they got new phones, up till 3 times..) They tried replacing sim/sd bay which didn't solve a thing. Anyone else experiencing this problem and got it fixed??
thanks
Click to expand...
Click to collapse
Try to change the modem ,base from your countryprovider mate , and feel free to check it from here which Modem you need .then Download the modem from here and try to Set your apn as well / and try to Change the network mode to GSM/WCDM or something . Lastly hit that thanks button for me
Repulsa said:
Try to change the modem ,base from your countryprovider mate , and feel free to check it from here which Modem you need .then Download the modem from here and try to Set your apn as well / and try to Change the network mode to GSM/WCDM or something . Lastly hit that thanks button for me
Click to expand...
Click to collapse
Hey, didn't i just flash a modem? Which fixed the sound/freeze bug etc? What if i reflash another (4.3) one and get that old problem again? (im on 4.4.2) I tried selected gsm/lte/wcdma settings manually, the phone was totally dead. My little brother who owns exactly the same phone and carrier (tmobile) have had 0 problems with his phone, he never touched it though and only recently upgraded to 4.3 by KIES. I tried switching out sim cards and my card worked on his phone, but his card didn't work on mine.
kilkil said:
Hey, didn't i just flash a modem? Which fixed the sound/freeze bug etc? What if i reflash another (4.3) one and get that old problem again? (im on 4.4.2) I tried selected gsm/lte/wcdma settings manually, the phone was totally dead. My little brother who owns exactly the same phone and carrier (tmobile) have had 0 problems with his phone, he never touched it though and only recently upgraded to 4.3 by KIES. I tried switching out sim cards and my card worked on his phone, but his card didn't work on mine.
Click to expand...
Click to collapse
You can Flash any GSM modem you like mate and The file i gave you Which solve your Sound issue was the one i repacked GSM+LTE combined packaged. and about the Network Mode , like i said choose one then reboot (Play with it). and make sure to setup your APN.
Repulsa said:
You can Flash any GSM modem you like mate and The file i gave you Which solve your Sound issue was the one i repacked GSM+LTE combined packaged. and about the Network Mode , like i said choose one then reboot (Play with it). and make sure to setup your APN.
Click to expand...
Click to collapse
I will look into this, thanks for your time!
kilkil said:
I will look into this, thanks for your time!
Click to expand...
Click to collapse
We already fixed the Sound problem and Im sure that signal Dropping issue can fix it easy just flashing a different modem/ or setup the right APN.
Hey all, the XXUFNA5 modem helped out great, untill today where i'm getting no reception at all again.. i'm on the Google Edition 4.4.2 rom prerooted for about 3 days. My speeds and reception were great before this and had no sound/freezing issues aswell. Anybody know what to do?? If i look in the REF modem topic, it's not showing any new modems? Am i missing something? Thanks in advance!!!
Edit* it seems in Holland they are using this modem -> I9505XXUFNC4
Cant find it anywhere though, any tips??
Thanks
kilkil said:
Hey all, the XXUFNA5 modem helped out great, untill today where i'm getting no reception at all again.. i'm on the Google Edition 4.4.2 rom prerooted for about 3 days. My speeds and reception were great before this and had no sound/freezing issues aswell. Anybody know what to do?? If i look in the REF modem topic, it's not showing any new modems? Am i missing something? Thanks in advance!!!
Edit* it seems in Holland they are using this modem -> I9505XXUFNC4
Cant find it anywhere though, any tips??
Thanks
Click to expand...
Click to collapse
Come on guys, not one reply? This is urgent, need some help!
I'm having this reception problem ever since I got this phone from my friend overseas I tried everything flash stock ROM ,change modems, flash custom roms and still no signal I tried different Sim cards also, I'm guessing maybe something is wrong with the main board? So I just gave up and started using it as a media phone alone

[Q] Note 3 not registered on network

So I got note 3 after a week or so I rooted it
But then give or take 3 weeks time
One morning I woke up and my phone was saying not registerd on network :/
I unrooted rooted unrooted rooted
I did factory reset I even sent it back to samsung
They sent me back after 2 weeks
Saying you damaged ur phone somehow
And we cant fix it
If we fix this its gona cost us more then the handset price can u realy beliv this :s
Anyway my point is my £500 gone in notime
So please all I ask is if anybody could help me fixing this tht wud b much appreciated
And whoz ever solution works im willing to donate £20 I promise
Regards
Check to see if you still have your imei or not... That's probably the reason, you lost your efs/imei...
If that's the case then if your made a efs backup like you should have,restore it. If not, try flashing stock.
Sent From My SM-N9005 To All You Wonder Nobodies!!
Khizar said:
Check to see if you still have your imei or not... That's probably the reason, you lost your efs/imei...
If that's the case then if your made a efs backup like you should have,restore it. If not, try flashing stock.
Sent From My SM-N9005 To All You Wonder Nobodies!!
Click to expand...
Click to collapse
nops the is not the case my imei is ok
I dunt understand the problwm myself :s
Whyyy
tambacto2 said:
nops the is not the case my imei is ok
I dunt understand the problwm myself :s
Whyyy
Click to expand...
Click to collapse
Did you test your sim card and make sure it is ok? Try to out this sim card into another phone and make sure it works? Put another gud sim card into your Note 3 and check if the problem still persist?
Dial *#0011# and check for the RX, TX value? Can you post this screenshot here?
Samsung is really crap with customer service
vndnguyen said:
Did you test your sim card and make sure it is ok? Try to out this sim card into another phone and make sure it works? Put another gud sim card into your Note 3 and check if the problem still persist?
Dial *#0011# and check for the RX, TX value? Can you post this screenshot here?
Click to expand...
Click to collapse
sry fr late reply here
Here the screenshoot
Anybody please
No Network neither
Hi everyone,
i got almost the same problem. My SM-N9005 was on the Standard TouchWiz Rom (4.3, rooted) when i updated to 4.4.2 via Kies and rooted it again.
Now my Phone shows me signal bars but tells me "Emergency calls only". I still have my IMIE.
I reflashed the stock ROM but that did not fix my problem sadly.
Hope you can help me!
UPDATE:
I reflashed the stock recovery once again and factory reset/wiped the data and now it somehow works again. Maybe that helps
UPDATE 2:
It seems like that was just working for a short moment, now after flashing the X-Note ROM (and Kernel) the "not registered in Network" message comes again though i got like 4 bars. The bars just are random somehow and jump up and down every few seconds.
Another Update:
While charging the phone (via PC or via the original Charger) i get a Message that it stopped charging because the battery temperature is too low. I Hope nothing went physically wrong?
your note 3 seems to be unlocked by SPT box or BST dongle
select wcdma/gsm or 3g/2g in mobile network and your network will connect
hope this helps:fingers-crossed:
Thanks for the reply, but my I bought my note 3 unlocked and new from my carrier and havent changed anything regarding the IMIE.
I was thinking about the modem beeing broke down while i updated to kitkat, and therefore flashing a new one. Any ideas on that?
No used all these solutions nothing :s
tambacto2 said:
No used all these solutions nothing :s
Click to expand...
Click to collapse
Did you update to 4.4.2 too? Because thats when mine stopped working. Maybe its the update that destroyed somehting, for the AT&T versions they had quite some problems as i read online...
tambacto2 said:
No used all these solutions nothing :s
Click to expand...
Click to collapse
If everything else fails try to write in Odin (or better yet in Mobile Odin Pro) just the modem - and aim for an older version, something like MI6 (present in MI7 firmware) or MJ1. With Mobile Odin Pro you MUST be on stock recovery and it will work perfectly first time, with normal Odin there are some reports that you might need to write it twice or something like that - search around.
xclub_101 said:
If everything else fails try to write in Odin (or better yet in Mobile Odin Pro) just the modem - and aim for an older version, something like MI6 (present in MI7 firmware) or MJ1. With Mobile Odin Pro you MUST be on stock recovery and it will work perfectly first time, with normal Odin there are some reports that you might need to write it twice or something like that - search around.
Click to expand...
Click to collapse
Tried that, had the same problems with the MI6, and with the MJ1 it got stock when i tried to unlock it...I was on the Xnote ROM though, Ill once again will try flashing the stock rom...
did you try another sim card ?
Sadly, the sim card works in my Note 2 without any problems... I think its sth that got physically destroyed somehow. When i plug it into the charger is says "stopped charging battery too cold"
vndnguyen said:
Did you test your sim card and make sure it is ok? Try to out this sim card into another phone and make sure it works? Put another gud sim card into your Note 3 and check if the problem still persist?
Dial *#0011# and check for the RX, TX value? Can you post this screenshot here?
Click to expand...
Click to collapse
tambacto2 said:
sry fr late reply here
Here the screenshoot
Click to expand...
Click to collapse
im in the same boat right now.
phone sent out for repair.
Ill keep you informed on what the issue is/was.
So i've send in my phone for repair after it didnt work again (no network), they did not find anything and send it back to me. Then it all of a sudden worked for like half a week (I flashed Xnote B.15 right away ) Now i have the same error again, it suddenly stopped working again though i did not install/change anything...
I hope someone gets a solution for that, else ill say goodbye Samsung and Knox and hello Sony/HTC or w/e my next phone will be...
RonnyMuh said:
So i've send in my phone for repair after it didnt work again (no network), they did not find anything and send it back to me. Then it all of a sudden worked for like half a week (I flashed Xnote B.15 right away ) Now i have the same error again, it suddenly stopped working again though i did not install/change anything...
I hope someone gets a solution for that, else ill say goodbye Samsung and Knox and hello Sony/HTC or w/e my next phone will be...
Click to expand...
Click to collapse
Mobiletechvideos.com
Phone. 657444jtag
Talk to josh.
I had the same problem.
He was able to fix it.
Let me know how it goes.
Sent from my SM-N900T using XDA Premium 4 mobile app
Thx, but sending it to the US for repair is a bit too expensive for me. Ill just try to get sth. from my insurance and then buy a different phone then.

[Q] No Audio

Hello, a few days ago, my brother rooted his galaxy S4 with Odin, then he decided to go back to the stock version without root permission. But during the installation of the firmware, the computer is turned off. So I decided to try again to install the firmware with Odin. The installation went fine, but the audio and the wi-fi didn't work. So I decided to install a recovery (jflte cwm 6.0.5.0) and install the latest nightly of CyanogenMod 11 Now the wi-fi works perfectly, but the audio doesn't work. I have done many tests reading on the forum, I also changed kernel but nothing.
Can anyone help me? Thanks in advance!
Costantinus said:
Hello, a few days ago, my brother rooted his galaxy S4 with Odin, then he decided to go back to the stock version without root permission. But during the installation of the firmware, the computer is turned off. So I decided to try again to install the firmware with Odin. The installation went fine, but the audio and the wi-fi didn't work. So I decided to install a recovery (jflte cwm 6.0.5.0) and install the latest nightly of CyanogenMod 11 Now the wi-fi works perfectly, but the audio doesn't work. I have done many tests reading on the forum, I also changed kernel but nothing.
Can anyone help me? Thanks in advance!
Click to expand...
Click to collapse
I am facing the same problem, I've been running CM 11 nightlies for a looong time though.
I hope that we somehow can get an easy fix for this.
All audio
For you guys, does all of your audio don't work, like you can't call, play YouTube or music?
Lakajadiwa said:
For you guys, does all of your audio don't work, like you can't call, play YouTube or music?
Click to expand...
Click to collapse
Yes, the dialer doesn't work, in the audio settings I can't hear the different ring tones. If I raise the volume up you I can't hear the classic " beep " .
So completely without audio.
Thank god, I thought I was the only one, no fix either as far as i know. Looked on the internet for one for an hour yesterday too
Costantinus said:
Yes, the dialer doesn't work, in the audio settings I can't hear the different ring tones. If I raise the volume up you I can't hear the classic " beep " .
So completely without audio.
Click to expand...
Click to collapse
Yea same here.. Hopefully we will find a fix soon.
My sound came back yesterday, but disappeared this morning again, sadly.
FOUND IT!
Neo3000x said:
Yea same here.. Hopefully we will find a fix soon.
My sound came back yesterday, but disappeared this morning again, sadly.
Click to expand...
Click to collapse
Its a modem file that is responsible for it,
http://forum.xda-developers.com/showthread.php?p=50786512#post50786512
If you cannot find your modem file just type in your model name with modem to goodle, install with ODIN good luck!
Lakajadiwa said:
Its a modem file that is responsible for it,
http://forum.xda-developers.com/showthread.php?p=50786512#post50786512
If you cannot find your modem file just type in your model name with modem to goodle, install with ODIN good luck!
Click to expand...
Click to collapse
Hmm I just installed the latest modem on my phone today, trying to fix it - But it didn't work.
I installed XXUGNH8 (latest) - Which one did you install?
Match
You need one to match your phone my was a sgh-i377m modem so an mvlufnc1
Lakajadiwa said:
You need one to match your phone my was a sgh-i377m modem so an mvlufnc1
Click to expand...
Click to collapse
Well, I just have the international GT-I9505, so I think I have the right one installed?
Neo3000x said:
Well, I just have the international GT-I9505, so I think I have the right one installed?
Click to expand...
Click to collapse
Well if it doesn't work it probably is the wrong one.
Lakajadiwa said:
Well if it doesn't work it probably is the wrong one.
Click to expand...
Click to collapse
As I have the international model, I am quite sure that it is the right one, and sammobile.com agrees with me.
PDA: I9505XXUFNB9
CSC: I9505NEEFNB2
MODEM: I9505XXUFNB9
Neo3000x said:
As I have the international model, I am quite sure that it is the right one, and sammobile.com agrees with me.
PDA: I9505XXUFNB9
CSC: I9505NEEFNB2
MODEM: I9505XXUFNB9
Click to expand...
Click to collapse
damn, maybe try different modems idk..... Cause I think that the modem is the problem, we'll at least for me it was.
I tried to flash different modem with Odin, but nothing.
I tried:
XXUGNG2
XXUGNE5
XXUBMF8
But no, the audio doesn't work!
Hi,
Yes the problem is related to modem! But to get it working again it's not necessary to go to the latest modem, actually it may not be the solution! Try installing the Galaxy Info app from Play Store ( https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo) and check your bootloader version, with it you'll have to flash the same version of modem as the bootloader you have.
If that doesn't solve the problem, you'll have to upgrade your modem, just change one version above and keep trying until it works. I know it's tedious, but that's the method I use and always worked .
~Lord
XxLordxX said:
Hi,
Yes the problem is related to modem! But to get it working again it's not necessary to go to the latest modem, actually it may not be the solution! Try installing the Galaxy Info app from Play Store and check your bootloader version, with it you'll have to flash the same version of modem as the bootloader you have.
If that doesn't solve the problem, you'll have to upgrade your modem, just change one version above and keep trying until it works. I know it's tedious, but that's the method I use and always worked .
~Lord
Click to expand...
Click to collapse
I've installed the Galaxy info app, and my bootloader was equal to XXUGNG2.
So, I've flashed with Odin the GNG2 modem first, then the 4 and the 8. But the audio still doesn't work.
So, I've flashed with the GNG8 modem his correlated bootloader, but the problem still persists. Any ideas?
Costantinus said:
I've installed the Galaxy info app, and my bootloader was equal to XXUGNG2.
So, I've flashed with Odin the GNG2 modem first, then the 4 and the 8. But the audio still doesn't work.
So, I've flashed with the GNG8 modem his correlated bootloader, but the problem still persists. Any ideas?
Click to expand...
Click to collapse
Hi,
Not many ideas here. But anyway, just in case you want to try I'm using XXUFNB8 bootloader with the XXUFNB8 modem. If you are running a bootloader newer than mine don't even consider changing your bootloader, but maybe the modem may help.
If you are sure you tried as many possible combinations of BL and MDM, then try flashing another zip, as this one may be corrupted...
~Lord
"Dream On! Dream Until Your Dreams Come True!" - Dream On (Aerosmith)
Sent from my GT-I9505
My sound still comes and goes as it pleases.. It seems like it is having its own life - Sometimes it stays for hours, then goes away for 10 minutes and sometimes it's the other way around.
Anyway, I've tried the phone-info app, and my bootloader (as expected) is: I9505XXUFNB9.
My Baseband version is also I9505XXUFNB9. PDA and CSC are both blank.
It still bugs me a lot I must say...
up, same problem here.
I've tried everything.. Any news?
So.. Just wanted to update you guys..
I've now been "with sound" for about 20 hours, which is a new record, and I think that it will stay.
What I did:
Wiped EVERYTHING - Internal SD, External SD, Data, etc.
Flashed EuroSkank 22-10-2014
Crossed my fingers
...
Payoff!

[Q] Reinstall bloatware before update

Hi my i9505 is rooted and I deleted the Vodafone bloat ware from it, my question is this,.......how do I reinstall the bloat ware before I update to 4.4 or don't I need too (I read it's dangerous to update if you have removed bloat ware from your phone, or is this untrue, any help would be greatly appreciated.
Kinds Regards
PS Before I forget how come some firmware from some sites say 4.4 Vodafone Australia, and some just say 4.4 Australia, does this means it will work with any i9505 or is it just they forgot to put in the carrier ??, my phone isn't locked but had some of the Vodafone bloat ware on it before I rooted and removed it.
@da20valve
Lol. No one forgot to put the carrier. Some firmwares are unbranded and some are branded.
The branded ones work with the carrier locked phones.
Unbranded ones work with the unlocked ones i.e. those who dont have a carrier locking
And it is safe to flash even if you have removed the bloat as when you flash a new firmware everything will return.
And yes. Backup the EFS folder (use the play store to download a efs backup software with highest rating) before you flash even the Official Firmwares.
"If someone helps, never forget to hit thanks ? "
So does that mean since mine is now unlocked even though it was from Vodafone originally I can use the unbranded ones ? (and if its the wrong one will it hurt the phone), also I just downloaded and Jwarriors EFS Backup Tool and saved it to my SD card, thanks for your help, I hit the thanks button.
Cheers
da20valve said:
So does that mean since mine is now unlocked even though it was from Vodafone originally I can use the unbranded ones ? (and if its the wrong one will it hurt the phone), also I just downloaded and Jwarriors EFS Backup Tool and saved it to my SD card, thanks for your help, I hit the thanks button.
Cheers
Click to expand...
Click to collapse
Haha.
Yes now your phone is unbranded and nothing can lock it now.
Still let @MAX 404 confirm this
"If someone helps, never forget to hit thanks ? "
da20valve said:
So does that mean since mine is now unlocked even though it was from Vodafone originally I can use the unbranded ones ? (and if its the wrong one will it hurt the phone), also I just downloaded and Jwarriors EFS Backup Tool and saved it to my SD card, thanks for your help, I hit the thanks button.
Cheers
Click to expand...
Click to collapse
DeepankarS said:
Haha.
Yes now your phone is unbranded and nothing can lock it now.
Still let @MAX 404 confirm this
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
+1
No need to reload bloatware , you can use any stock firmware in your phone as long as is for your S4 model (i9505)
MAX 404 said:
+1
No need to reload bloatware , you can use any stock firmware in your phone as long as is for your S4 model (i9505)
Click to expand...
Click to collapse
no worries I will use the Optus Australia version, can anyone point me to a how to for the flash
Thanks
da20valve said:
no worries I will use the Optus Australia version, can anyone point me to a how to for the flash
Thanks
Click to expand...
Click to collapse
hi mate
This is the latest for Optus
http://www.sammobile.com/firmwares/download/37801/I9505XXUGNH6_I9505OPSGNH2_OPS.zip/
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
I would do a backup first of your efs folder , any thing important and do a factory reset first.
MAX 404 said:
hi mate
Should I use the Optus one or the one that just says Australia ?, as mine phone was originally Vodafone would it really matter, if it doesn't why do they bother branding them. why don't they just build one for the 4 main carriers, or does the one that says Australia for all carriers.
Click to expand...
Click to collapse
da20valve said:
MAX 404 said:
hi mate
Should I use the Optus one or the one that just says Australia ?, as mine phone was originally Vodafone would it really matter, if it doesn't why do they bother branding them. why don't they just build one for the 4 main carriers, or does the one that says Australia for all carriers.
Click to expand...
Click to collapse
IMHO you should flash a non branded one.
Why flash the optus one? Just because youre using optus (guessed) does not mean you have to flash that.
And firmwares are branded because they carry specific modem reqirements for the carriers
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
Re root after 4.2 unbranded update
Okay since I installed 4.2 my phone is rebooting a ****load (during calls) and just sitting there, wondering would the problem could be, I have noticed there have been a few erros that have said "folder mount has stopped working, can I just uninstall this or doesn't it work like that, also I am not rooted anymore should I root now or wait to get the problem sorted out first.
I have the s4 black edition also Vodafone but no branding at all
Sent from my GT-I9505G using Tapatalk
da20valve said:
Okay since I installed 4.2 my phone is rebooting a ****load (during calls) and just sitting there, wondering would the problem could be, I have noticed there have been a few erros that have said "folder mount has stopped working, can I just uninstall this or doesn't it work like that, also I am not rooted anymore should I root now or wait to get the problem sorted out first.
Click to expand...
Click to collapse
You need to do a factory reset and if that doesn't sort it try a different firmware.

Categories

Resources