According to VZW, not a single case listed on their accessories page for the Turbo will fit the ballistic nylon-backed model as of this posting. The irony is that searching specifically for cases for the Turbo with the ballistic nylon back yields a page with the majority of the Turbo cases offered, but in the product details for every, single one they are flagged as incompatible. Just a heads-up.
-e- I'm amending my post to help alleviate the concerns of anyone that might find it later. Reportedly the ballistic-nylon backed Droid Turbo fits in the following cases just fine:
Tech21 Impactology Classic Mesh
Otterbox Defender
Incipio DualPro
I can also add that I have my ballistic-nylon backed phone in hand and it fits in the Lifeproof Fre case just fine as well.
I saw that as well, but it was after I had already ordered one.
But to be fair it might be nothing beings the glass sceen protector says the same thing.
I should be able to say if the incipio fits on Friday
The ballistic nylon version is thicker than the others by 0.6mm. I didn't confirm that; someone posted it in another forum. It is heavier than the other models, though, so wouldn't be surprised if it was bigger.
Free storage from Copy:
https://copy.com?r=cScoov
jackdubl said:
The ballistic nylon version is thicker than the others by 0.6mm. I didn't confirm that; someone posted it in another forum. It is heavier than the other models, though, so wouldn't be surprised if it was bigger.
Click to expand...
Click to collapse
0.8mm thicker and 7 grams (0.2oz) heavier.
Thx for the heads up, I was going to drive to the store and buy 2 ballistic nylon models but now I'll hold off
Also saw this about the nylon back:
Apsalus said:
It feels softer/less slick than most ballistic nylon that I've handled. Also snagged all of the microscopic burs on my skin, like a microfiber cloth. Caused a "nails on a chalkboard" sensation. I'm set on the 64GB though so I'll have to live with it.
Click to expand...
Click to collapse
Hopefully it isn't too bad and the fiber "breaks in" after while and sort of wears the rough fibers down or something.
0.8mm is not that much thicker, and since Nylon can be compressed I wonder if the cases will actually fit.
Just got mine, you don't want a case, it feels great lol
I wonder if it gets rough if it could be refreshed with a hot air gun. Basically it's like using a hot air gun or torch(!) to get the fibers to melt slightly so the fuzziness is gone.
I had a nylon holster for years that got fuzzy and did just that and it looked shiny and new again.
The cases fit. Tested at store.
jackdubl said:
The cases fit. Tested at store.
Click to expand...
Click to collapse
The rep I saw tried an Otterbox on one and it didn't fit all the way. It may be hit and miss.
Otterbox fits
I just picked up my 64GB nylon and the Otterbox I got for free fits just fine. The Verizon store I went to just opened so they were having a $50 off "essential" accessories when buying a new phone. I don't ever use cases, but couldn't pass up a free Otterbox.
Who needs a case - running naked - thats the whole reason to get a Droid Ballastic or Kevlar -
JustChooseAName said:
I just picked up my 64GB nylon and the Otterbox I got for free fits just fine. The Verizon store I went to just opened so they were having a $50 off "essential" accessories when buying a new phone. I don't ever use cases, but couldn't pass up a free Otterbox.
Click to expand...
Click to collapse
Did the top fit flush with the rest of the case?
jal3223 said:
Did the top fit flush with the rest of the case?
Click to expand...
Click to collapse
Yup. I just put it back in the case to verify; everything clips down just fine and the rubber backing folds over into the grooves.
Cool. Good to know that some cases will fit even though they aren't specifically designed to.
I can confirm that otterbox defenders fit, we bought 2 droid turbo 64gb tonight and both are in otterbox defender cases without issue.
I can confirm that the tech21 classic mesh case fits the ballistic nylon back fine. Would have preferred the metallic glass but decided to go for the 64 gig model to help future proof it.
Lifeproof case
Really looking into this case. It's $89.99 at the store and the guy said my 25% off discount doesn't count towards it but on the website it's discounted for 25%. Anyone get this case? I'm really tempted to drop the extra money. This is the most high-end device i've ever owned and I would hate for something to go wrong. I also have the 64gb nylon-backed but I really want this thing protected.
Otterbox commuter fits the nylon 64 gig model perfectly.
Sent from my XT1254 using XDA Free mobile app
Related
I'm in the market for a new case since the $3 one I bought on Ebay is starting to peel finish. I'm looking for the thinnest, slickest case out there.
What case are you using?
Do you like it?
How much was it?
Where did you buy it?
Pictures?
THX!
well i would like to know this as well.
However i can enlighten you on how horrible the body glove case from sprint is. it looked great and was loving the feel until after a week, pulled it out of my pocket to find the case was broke where the volume rocker is. needless to say it looked and felt good but all in all i do NOT recommend it to anyone.
nfaust01 said:
well i would like to know this as well.
However i can enlighten you on how horrible the body glove case from sprint is. it looked great and was loving the feel until after a week, pulled it out of my pocket to find the case was broke where the volume rocker is. needless to say it looked and felt good but all in all i do NOT recommend it to anyone.
Click to expand...
Click to collapse
Mine did exactly the same thing, lasted about two weeks.
Funny, I ordered one of the $3.00 ones off of Ebay to replace it.
Actually I got mine on Amazon... forgot. This is the case I bought and while it is pretty thin and fits well, the paint job is totally shotty and now looks horrible:
http://www.amazon.com/Premium-Rubberized-Snap-Seamless-Design/dp/B003TMIFEY/ref=pd_sxp_grid_pt_2_2
I bought the white and chrome case from Sprint when I got the phone. I have had my phone since the release day for the EVO and the case still looks brand new. I really like the leather feel, and the chrome accents add to the overall beauty of the phone. I would recommend the case to anyone!
A guy I work with bought this one on Ebay about 2 weeks ago and says he's still happy with it:
http://cgi.ebay.com/New-Black-Hard-Cover-Case-HTC-Evo-4G-/220646982429?pt=PDA_Accessories
Im using a seidio innocase active .
Love it.
Amazon com 24.99...i had promo code...thanx wife
http://www.amazon.com/gp/aw/d.html/ref=aw_d_iv_wireless?is=l&a=B003PJ6QV0
Sent from my PC36100 using XDA App
Case-Mate Tough Case. Purchased from the Case Mate website it just became available. Been using this case on my iPhone 4G and I love it, best case out there for protection.
anothertmobilemda said:
Im using a seidio innocase active .
Love it.
Amazon com 24.99...i had promo code...thanx wife
http://www.amazon.com/gp/aw/d.html/ref=aw_d_iv_wireless?is=l&a=B003PJ6QV0
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
That Seido case looks bulky no? I'm looking for something that doesn't add to the already large footprint of this thing in my pocket.
How about the Otterbox cases.. anyone have experience with them on other devices (not out yet for the evo)
http://www.otterbox.com/htc-cases/htc-evo-4g-cases/
My buddy has a well-worn one on his iPhone that has been through hell and still looks good.
bkfitz said:
How about the Otterbox cases.. anyone have experience with them on other devices (not out yet for the evo)
http://www.otterbox.com/htc-cases/htc-evo-4g-cases/
Click to expand...
Click to collapse
i have the body glove universal holder from radio shack which works for me. however, i am looking at getting the Seidio Innocase holster case combo... which is a steal on amazon as the case itself is $30 at sprint and the combo is $30 on amazon.
http://www.amazon.com/Seidio-Innoca..._1_4?ie=UTF8&s=wireless&qid=1282702286&sr=8-4
i already tried the case and its nice and fits inside the body glove holder too, snuggley like pigs in a blanket at ihop.
Shouldn't this be in the Accessories forum?
(Black TPU case FTW.)
Yep... should be in accessories thread... my bad.
Are the otterbox cases thin though... I'm really looking for the thinnest case out there.
I always just wait for some YouTube reviews to pop up, shows me are how big the case is in real life. (Or as real as I care to get.)
bkfitz said:
Yep... should be in accessories thread... my bad.
Are the otterbox cases thin though... I'm really looking for the thinnest case out there.
Click to expand...
Click to collapse
Looking at the impact series case it doesn't look to be too bad. I really like the looks of the bottom two cases, so I signed up to be notified when they come out. I had the Sprint Body Glove case, had since release actually, but the volume rocker area just cracked last week. Lasted longer then most I suppose.
I've got the Seidio Innocase holder IceCreaMan linked to and it has been nice. It's got a nice texture, doesn't slide easily, isn't bulky, has a belt clip, and with the case on, it makes it so the camera doesn't stick out. It doesn't cover anything either so you still have your speakers, cameras, microphones, plugs, etc. Would definitely recommend it.
the Innocase II is a proven design in my opinion
its thin, and can take a drop (ive dropped mine from 8ft + onto concrete without any cracks in the case/damage to the phone)
I got a couple cheap cases from ebay; they're the clamshell design that has a front & back the snap together. They all felt too big and bulky though, so I got a Talon to replace 'em. Love it. Just snaps onto the back of the phone and protects the corners from drops and the camera from scratches when laying the phone on it's back. I have an InvisibleShield on the front to protect the touch screen from scratches.
The talon is almost like not having a case at all -- doesn't add much bulk to the phone.
And it's only 10 bucks.
Got my case today, I was a little worried because two days after I purchased it Ebay pulled all of the sellers listings and sent me a notice saying I could file a claim to get my money back. Since the seller had good feedback, and he had notified me that it had been shipped (from China), I decided to wait and see if it would show up, which it did.
I really like it, much better fit and quality than the Sprint body glove I had on my phone before. Time will tell if it lasts, but I have to say for $3.00, I am pretty impressed. It has a soft feel that gives a more secure feeling grip than the body glove, plus it is slightly thinner, but still protects the camera lens. Plus it is red, love the color.
Wish I could give a link to the one I got, the seller has put some of his cases back up, but no Evo cases yet.
Here is a link to a red rubberized hard case that looks very similar to the one I got.
So today I was getting out of my car on the way to class and i dropped my Droid X in the street!! Needless to say theres more than a few scratches and dings on it . I was very mad at myslef. I wish there was a way to fix these scratches and dents.
Anyways, my question is what is the best case for the droid X that will cover these scratches but add minimal to no extra bulk?
Thanks
Really, it's all going to be on you. I personally, like the Otterbox cases, however, you should probably look at the Verizon store, see if there's anything there you like, and then get on Amazon and see if you can find the same case (probably @ half price ).
I went with the Incipio case. I put a review in the accessories section, which reminds me i should get the pics up. But like stated above its all personal preference when it comes to cases.
Sent from my DROIDX using XDA App
michaelearth said:
So today I was getting out of my car on the way to class and i dropped my Droid X in the street!! Needless to say theres more than a few scratches and dings on it . I was very mad at myslef. I wish there was a way to fix these scratches and dents.
Anyways, my question is what is the best case for the droid X that will cover these scratches but add minimal to no extra bulk?
Thanks
Click to expand...
Click to collapse
get an epik case from ebay. only cases i use on my devices. I have one now for my thunderbolt.
I use the a no-name thin profile rubberized case available on Amazon here. It's only 3 bucks (with free shipping). It has a nice grippy feeling to it without being too grippy where it sticks in your pocket. It also adds very little bulk to the phone.
Dude, you had no case or screen protector? Lesson learned? Ebay has a ton of cases that would have protected your phone. I use the Verizon TPU semi rigig silicone case with Zagg invisible sheild on the screen. It's really protected.
Otterbox is VERY good, it completely encompasses the phone & also comes with a screen protector.
michaelearth said:
So today I was getting out of my car on the way to class and i dropped my Droid X in the street!! Needless to say theres more than a few scratches and dings on it . I was very mad at myslef. I wish there was a way to fix these scratches and dents.
Anyways, my question is what is the best case for the droid X that will cover these scratches but add minimal to no extra bulk?
Thanks
Click to expand...
Click to collapse
If you want the maximum protection, look at the Trident Kraken case for your DX. Check the price at Amazon, as they're usually lower. If you want intermediate range protection, check out Otterbox or Body Glove cases. They also are sold by Amazon.
-Mike
Thanks for all of the advice guys! I just wish i had a time machine so i could avoid this whole fiasco!
I had a carbon fiber case on my dx when I dropped on a glacier but it hit some rocks on the screen side so it took some dings (last summer). Moral of this story is the best way to protect your phone isn't always a case or screen protector, sometimes its being extra careful.
Sent from my Xoom the way it should be, rooted and with SD card.
So I was surfing on ebay for a rugged case for my n4
I ran by this...
http://www.ebay.com/itm/Triple-Armo...t=US_Cell_Phone_PDA_Cases&hash=item5d43674502
It seems like a ballistic sg knock off but at a lower price
comes with screen protectors too if that matters for anyone...
Does ANYONE have any experience with this case? If so, please let us know!
Otherwise I'm going to order a Ballistic SG this week.....
mc704 said:
So I was surfing on ebay for a rugged case for my n4
I ran by this...
http://www.ebay.com/itm/Triple-Armo...t=US_Cell_Phone_PDA_Cases&hash=item5d43674502
It seems like a ballistic sg knock off but at a lower price
comes with screen protectors too if that matters for anyone...
Does ANYONE have any experience with this case? If so, please let us know!
Otherwise I'm going to order a Ballistic SG this week.....
Click to expand...
Click to collapse
I would order that ebay one instead of the SG.
I had the SG and it wasn't worth the money. The problem with it is that the silicone isn't a perfect fit so the nexus 4 slides up and down a bit. The plastic piece that goes over the inner silicone cover occasionally comes undone a bit (it's hard to describe exactly) which leads to more sliding of the nexus. The plastic piece doesn't stay on as well as I'd hoped because the silicon is too soft to let it really clamp on well.
That ebay one is much cheaper and appears to be basically the same.
The case I have now and would really recommend is the mybatt. In addition to a back plastic clamp on piece, it also has a front screen side snap on piece so its inner silicon layer is sandwiched securely. I haven't had any sliding issues like I did with the Ballistic. Here's a review someone did on the mybatt: http://forum.xda-developers.com/showthread.php?t=2120148
It does come in a couple different colors. I have the all black one because I thought the white might get stained with dirt.
lazer155 said:
I would order that ebay one instead of the SG.
I had the SG and it wasn't worth the money. The problem with it is that the silicone isn't a perfect fit so the nexus 4 slides up and down a bit. The plastic piece that goes over the inner silicone cover occasionally comes undone a bit (it's hard to describe exactly) which leads to more sliding of the nexus. The plastic piece doesn't stay on as well as I'd hoped because the silicon is too soft to let it really clamp on well.
That ebay one is much cheaper and appears to be basically the same.
The case I have now and would really recommend is the mybatt. In addition to a back plastic clamp on piece, it also has a front screen side snap on piece so its inner silicon layer is sandwiched securely. I haven't had any sliding issues like I did with the Ballistic. Here's a review someone did on the mybatt: http://forum.xda-developers.com/showthread.php?t=2120148
It does come in a couple different colors. I have the all black one because I thought the white might get stained with dirt.
Click to expand...
Click to collapse
Thanks for your opinion!
I went ahead and bought it on Amazon through a third party for almost $6! (CHEAP price IMO) Ebay had it for 9 bucks :victory:
I read some reviews of it. It seems like people had a mix problem with the sensor cut out. Do you have any problems of your own or any cons you want to bring up?
mc704 said:
Thanks for your opinion!
I went ahead and bought it on Amazon through a third party for almost $6! (CHEAP price IMO) Ebay had it for 9 bucks :victory:
I read some reviews of it. It seems like people had a mix problem with the sensor cut out. Do you have any problems of your own or any cons you want to bring up?
Click to expand...
Click to collapse
I personally didn't have that problem. It seems to have mainly been on the first few versions of it that came out. People didn't mention that issue as much after it had been out for awhile. I just got mine about a month and it's been fine.
lazer155 said:
I personally didn't have that problem. It seems to have mainly been on the first few versions of it that came out. People didn't mention that issue as much after it had been out for awhile. I just got mine about a month and it's been fine.
Click to expand...
Click to collapse
just to follow up with this post...
My case doesn't have this problem either so if anyone is interested in getting the Mybat Tuff Case & doesn't mind the bulk. I highly recommend it!:good:
My ballistic case fits perfectly without problem but hey that one is cheaper
Sent from my Nexus 4 using xda app-developers app
I have the Ballistic case and it fits good. Mine doesnt slide around in the rubber part and Ive never had the plastic cover fall off.
I do wish Gumdrop made a N4 case though.
Simply put-
How many turbo users prefer no case?
How many turbo users need protection?
I want to get an idea of how many people are confident with the build quality of this phone, i want to know the averages for preference of our turbo users, and i want it simply put in yes or no on the poll.
ccheww said:
Simply put-
How many turbo users prefer no case?
How many turbo users need protection?
I want to get an idea of how many people are confident with the build quality of this phone, i want to know the averages for preference of our turbo users, and i want it simply put in yes or no on the poll, which im not sure is posted correctly.
Click to expand...
Click to collapse
No case. No need.
Naked all the way.
Sent from my XT1254
I find myself going back and forth. Putting the case on when I go outdoors, leaving it off indoors. I wish I had th balls to keep the case off. Someone motivate me.
Case at work...naked everywhere else
No case ever
Sent from my XT1254 using XDA Free mobile app
Yeah same. Phone is great without case. The trouble with the cases is that most of them don't seem to fit very well. I have the 64 gb version. Tried the moto flip case. It was so tight I almost had to rip the case in half to get it back out. Otterboxes for this phone are junk. The only good fitting case I've found is the incipio dual pro. I keep it off at home and on at work.
esmccarty said:
Yeah same. Phone is great without case. The trouble with the cases is that most of them don't seem to fit very well. I have the 64 gb version. Tried the moto flip case. It was so tight I almost had to rip the case in half to get it back out. Otterboxes for this phone are junk. The only good fitting case I've found is the incipio dual pro. I keep it off at home and on at work.
Click to expand...
Click to collapse
I have an otterbox commuter for my 64gb bn and it fits perfectly. Not too tight and has already saved my phone from 9 separate drops. I definitely wouldn't call it junk. Sure a bit bulky. But that's the price you pay for a tough case.
rglebien said:
I have an otterbox commuter for my 64gb bn and it fits perfectly. Not too tight and has already saved my phone from 9 separate drops. I definitely wouldn't call it junk. Sure a bit bulky. But that's the price you pay for a tough case.
Click to expand...
Click to collapse
The defender was definitely junk. I had to return mine. The way they cut the screen protector out is horrible. It makes it so you have to swipe down two or three times from the notification bar. I tried the commuter but then I remembered that every single one I've gotten in the past has cracked and fallen apart when I didn't even drop it.
I use a case only to hold the metal piece so that it connects to my magnetic car mount. Aside from that this phone is naked.
No need to case it! It isn't a samsung phone!
I use a case at work. I work in a shop so there's grease, weld spatter, grinding dust etc. I brought the phone in ONE DAY and it slipped out of my hand and bounced off a metal welding table. Never again. I have the otter box commuter and I like it. Its a little bulky but still fits in my back pocket just fine. If I didn't work in such a messy and hazardous workplace I would never have a case on this sexy phone.
Naked at home, sarcophagus when out
Otterbox Defender. I am pretty rough on phones. Wouldn't last a week without it.
Sent from my Nexus 10 using XDA Free mobile app
No case. I'm in construction. And even when I'm carful my phone can take a beating. My g2 was all scratched up in the first week. This beast still looks brand new! Very impressed
Screen is covered by motorola if it breaks. No need for a case if you ask me.
Naked all the way
I prefer no case, but I prefer more a phone that doesn't have a cracked screen or broken internals
I go caseless. I just like the way the ballistic nylon feels in my hands. I'm waiting for the new Tudia case for the BN version to use for when I go out running. That's really the only time I feel like I need one.
This is the first phone I've had in years (since pre-android days) on which I have not put a cover. I've seen people's comments about the Turbo being ugly, but the ballistic nylon is the first phone for me where I am both confident enough in the general build and impressed enough with the looks that I cannot bear to hide it behind a case.
I had a spider cracked glass on my phone so I order the replacement. Had it for a bit but couldn't seem to find the time to fix it. Dropped it another time or two, the the digitizer went. Broke the ribbon cable to power/volume buttons. My beloved Nexus is officially dead. So I find myself holding a brand new replacment glass, a otterbox defender case, and I know i have a few screen protectors in a box somewhere. Couldn't find another Nexus 6, had no phone, couldn't/wouldn't spend the bucks on a pixel2, so I bought a moto z2 play. unlocked and not much bloat, so I am happy for a time. Sub $400 dollar phone, but ok features for a mid-range device. Had an motorola Atrix way back when, and it had a finger print reader on it. Missed it since then, glad this phone has it. So, good by to nexus folks. Mod Edit: no selling/trading on XDA - use www.swappa.com
peace out folks
Wait... they made an actual, real deal Otterbox Defender for the shamu? Or are you talking about some random rugged case for it? Got pictures?
Darkshado said:
Wait... they made an actual, real deal Otterbox Defender for the shamu? Or are you talking about some random rugged case for it? Got pictures?
Click to expand...
Click to collapse
no otterbox but im fairly certain it is in reference to this case https://www.amazon.com/SUPCASE-Full-body-Protective-Protector-Resistant/dp/B00OHFGMGU
I actually found that case for $5 at the thrift store, unused. The timing was excellent as my old case had just failed. Ironically, the failed case was one of the dual-material Unicorn Beetle cases from Supcase. The TPU separated from the hard plastic at the seams. Anyway, the case mentioned in the previous post was both a pain to put on and remove, and made the N6 even larger. Add approximately a half inch total to each of the three dimensions: length, width, and height, and be thankful Supcase included a belt holster, because you're going to need it.
Strephon Alkhalikoi said:
I actually found that case for $5 at the thrift store, unused. The timing was excellent as my old case had just failed. Ironically, the failed case was one of the dual-material Unicorn Beetle cases from Supcase. The TPU separated from the hard plastic at the seams. Anyway, the case mentioned in the previous post was both a pain to put on and remove, and made the N6 even larger. Add approximately a half inch total to each of the three dimensions: length, width, and height, and be thankful Supcase included a belt holster, because you're going to need it.
Click to expand...
Click to collapse
ya i had it too it was a major piece of crap, ironically the 95 cent ones from china or wherever someone posted a year or so ago work great :fingers-crossed:
I went with an Incipio DualPro as a replacement and that worked well. So well in fact that the second thing I did with my Pixel 2 XL after purchase from Google was to head to the nearest Verizon store and pick up the DualPro for the P2XL.
My roommate uses the N6 now, but she didn't like the fact my DualPro case was in black. She got one in pink *rolls eyes*