[Q&A] [KK 4.4.2 Kernel 3.4.104][26 OCT] Dorimanx 8.6 LG G2 800/1/2/3/5/6 F320* LS/VS
Q&A for [KK 4.4.2 Kernel 3.4.104][26 OCT] Dorimanx 8.6 LG G2 800/1/2/3/5/6 F320* LS/VS980
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KK 4.4.2 Kernel 3.4.104][26 OCT] Dorimanx 8.6 LG G2 800/1/2/3/5/6 F320* LS/VS980. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
don't we already have a q&a thread for this? why another one? @dorimanx what say you?
original dori q&a
http://forum.xda-developers.com/showthread.php?p=50263622
Don't we already have an Q&A thread?
Please could we delete the other (original) QA thread or some mod link the QA Bot to the original?
Some people started to post their questions in both threads because of confusion!
What crap is that - two qa threads... pls
delete...
This thread should redirect you to this page here. Mobile apps aren't always capable of handling redirects so please use the link above if you are reading this message.
Thanks
Newer poster, long time xda lurker. Always seem to be coming back to the Cloudy + dori combo! I just wanted to confirm the HotplugSuspend issues occurring with 8.8 as well as the phone generating quite a bit of heat (70-75C) under what should be lighter loads (browsing, RSS feed apps, etc.) with alucard hotplug and gov enabled. Will post logs later. Thank you for all your work dori and I hope to be of help going forward.
Hello everyone! I'm using D802 on Cloudy G3 v2.1 rom and after installing Dorimanx 8.8 (been using 8.7 without any problems) i get stuck at fastboot.Any suggestions appreciated!
dev
is all functions r working with this kernal
can i install it
is knock on is supported in this kernal????
advantage of this???
Hello everyone,
Sorry if my question has been answered 10 times but i didn't find a clear answer:
Is Dorimanx's kernel compatible with cm11 or only stock roms ?
thank you!
I already flash it its so smoth... Thank u so much... Hehehe
Dorimanx D802 flash
Do i have to wipe anything in order to install the kernel?
Good morning.What doing arrangements for LG G2 Cloudy g3 2.1
wiping before flashing kernel
Do i have to do a wipe before i flash a kernel?
F320L bootloader problems
Sir good day to you. Im really sorry if my post here is not really related to your post. but I need some help and it will be really appreciated if you will be able to help me. Im really noob in modifying my LG G2 F320L.
Ive read many threads on how to root and flash custom recovery. but I cant find any post here that can help me with my prob. I have already rooted my phone using ioroot25 and flashed twrp recovery using autorec.
I've been trying to go to bootloader using power and volume buttons. as what I see in many posts. its only power + volume down button until I see LG logo and then release it and push and hold it again until I see a prompt that will ask me if I want to wipe my phone. but going to bootloader isnt working.
It only just boot to the system right away. I've been trying to press and hold the power and volume down buttons but the LG logo only just appearing and disappearing repeatedly. Ive also tried plugging USB and pressing power + volume down as what you said in your post, I thought the usb thing might be the missing part why i was not able to go to bootloader. but It's still not working.
I also tried using application that will make me reboot to bootloader but the phone only just reboots to the android system right away. using application to reboot to recovery is working. booting to bootloader is really my problem. This is the reason why I was a bit afraid to flash a kernel or new rom because I cant get to bootloader in case flashing new kernel or rom wont work.
the last thing I tried was pressing all buttons, power + volume down + volume up at the same time. and a white screen appears with korean words menu. that is also the problem because I cant read it. I will post the picture of the screen projecting white screen with korean selections. Please help me if you could. thanks alot.
"s1123.photobucket.com/user/chronox02/media/F320L/IMG_20141118_092314.jpg.html?filters[user]=122025344&filters[recent]=1&sort=1&o=0"
"s1123.photobucket.com/user/chronox02/media/F320L/IMG_20141118_085249.jpg.html?filters[user]=122025344&filters[recent]=1&sort=1&o=1"
Im sorry if the link is only quoted. the site wont allow me to post picture because im a new member.. I hope someone could help me with this.. thanks.
Could you add support for l01f which is Japanese Docomo veison of G2
There is just a little different in the kernel config with d802 , could you think about supporting it.
Isai lgl22
Dear all, I want to use this Kernel I am using G2 Japan model ISAI LGL22. Is which version can support my phone?
Related
[Q&A] [ROM][OFFICIAL][KitKat 4.4.4][JFLTE] PAC-ROM 4.4.4.RC-2/BlackPowerEdition-NG[A
Q&A for [ROM][OFFICIAL][KitKat 4.4.4][JFLTE] PAC-ROM 4.4.4.RC-2/BlackPowerEdition-NG[AROMA]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][OFFICIAL][KitKat 4.4.4][JFLTE] PAC-ROM 4.4.4.RC-2/BlackPowerEdition-NG[AROMA]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
pika456 said:
anyone has suggestions to my problems please?
1. time gets coucou on reboot and fixes only if I turn on data
2. BT and wifi stuck, other times cannot connect and others seem connected but are not.
I'm using the "stable" rc2 and I'm on ART
thank you
Click to expand...
Click to collapse
To pt. 1:
For me it helped deleting the file time_deamon in the folder:
system\bin and then reboot.
But you need a file explorer like root browser eg. for that.
Hi,
how can I change the volume of the voice in the dialer if someone calling me? By pressing the Vol+ or Vol- Buttons it dosen't change anything... :/
Hi, is it safe to downgrade from RC3 to RC2?
I have flashed RC3 but now every time I lock my phone, I lose signal.
Is anyone else having this problem?
Issue with date and time[KitKat 4.4.4][JFLTE] PAC-ROM 4.4.4.RC-2/Black
Hello Guys,
I was not able to din any post with the same issue than me, i decided to try this rom with goggy kernel, but I am having an annoying issue.
Every time i poweroff or reboot my samsung galaxy s4 he does not save the date and time and I have to set them every time.
Please give me some advice, I am a total nobie on this.
Thanks in advanced.
File to flash from Odin..?
Just wondering how I might be able to get my hands on a file to be able to flash through Odin opposed to CWM?
*Sorry for accidentally posting again.. Please delete this post! Thanks*
Just wondering how I might be able to get my hands on a file to be able to flash through Odin opposed to CWM?
since 13th no updates
Since 13th January the Changelog change each day , put the downloads don't work and the Pac Site is also down
exchange service has stopped how can i fix it?
Help ?
IS this rom stable enough for a daily driver ? And is there gapps integrated in this ? { Asking About the black power edition } Please Reply in a specific manner And why i should choose this rom over pa , aokp , cm . ect.
Link is down.
KK FINAL
Hello, does anobody have the "20150205-pac-jflte-KK.FINAL-Black-Power-Edition_NG.zip" file?
The original link isn't up anymore and I can't seem to find it anywhere on the web.
Please help
Q&A for [KERNEL][LINARO] Modded stock kernel - d802 [G2 + G3 ROMs][v0.41]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][LINARO] Modded stock kernel - d802 [G2 + G3 ROMs][v0.41]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
gasReal said:
hey guys, I notice when reboot g2 that battery indications restart by zero
have someone this problem with 0.41 ? (I'm on 20H stock prerooted by 6ril1 + zip debloater)
Click to expand...
Click to collapse
yes i have the same problem. is there any solution for this? and this does effect the battery calibration?
reddsmokee said:
yes i have the same problem. is there any solution for this? and this does effect the battery calibration?
Click to expand...
Click to collapse
it is not a problem of kernel, but of the g2. when restart the smartphone between 100 and 90% comes the problem, under 90% it doesn't happen. so don't restart g2 before 90% of battery
gasReal said:
it is not a problem of kernel, but of the g2. when restart the smartphone between 100 and 90% comes the problem, under 90% it doesn't happen. so don't restart g2 before 90% of battery
Click to expand...
Click to collapse
Thank you so much i will try. [emoji4]
Hi all,
I'm on a 20g stock rom + root + TWRP + modem 20h + bruce v0.41.
Since I've flashed the Bruce Kernel v0.41, I can't see my memory card 64 Gb.
I don't have problems with other memory cards =< 32Gb.
I've also formatted my 64gb memory but the problem is still here.
I tried my 64 gb memory card with other device ... no problem so the problem is in the combination of my LG G2 and my memory card (until now I don't have problems to read 64gb memory card)
I'm not sure it's a matter of kernel but the coincidence is strong.
Can someone help me?
Thanks in adv
Inviato dal mio LG-D802 utilizzando Tapatalk
info
Can I have the default voltage setting (V 0.41)?
does it work on LG VS980?
Hi,
Sorry for my noob question but i cant get a clue about it. Does this kernel can be installed on a LG G2 VS980?
Thanks for all, and sorry for my bad english,
F2FS Support ?
Will this kernel work on a stock d802 20h rom? I saw somewhere that it is made for 20d roms, but maybe I misinterpreted that?
Edit: I only just noticed that on this page there are people with 20g and 20h roms using the kernel, so I guess I have my answer. Sorry, I had only read the first 20 pages or so.
Edit 2: Works fine, and my G2 does feel snappier now. I hope the missing thermal throttling won't become a problem.
The main thing for me is that the headset hissing problem is gone now, although I also needed to enable the G2 Tweaksbox fix to completely remove the hissing.
Q&A for [OFFICIAL] Hazard17's LG G2 Toolkit v1.5 {WINDOWS}
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [OFFICIAL] Hazard17's LG G2 Toolkit v1.5 {WINDOWS}. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
bricked lg g2 sprint
i have a bricked sprint lg g2 (rooted) but with only stock recovery and download mode , is there a way with your tool to fix it other than flash the 2 giga official rom with because i am in an isolated area with very limited internet speed and quota, thank you
Hazard17 said:
Few days ago I've resumed my work. New toolkit will have many more improvements. New engine, which will allow me to add new options. Now I'm working over installing bumped recovery over KK and JB bootloader. Version 2.0 will be realised soon.
Click to expand...
Click to collapse
Would you be so kind to explain what bumped means? No need to go into detail as I'm familiar with most of the concepts but I
have yet to find a definition of BUMPed.
(Yes I have googled, so please don't bother with lmgtfy )
Thanks for your toolkit, btw!
Regards,
hi bro
I can use toolkit for lg g2 docomo l01f ?
It's not good idea to use it with another model than D802. Version V2.1 will allow you.
umerzifonlu said:
First of all. Thx all hard working.
Can i use this tool for install magisk?
Or how can? Because g2 strict. LOCK BOOT
When i try to flash magisk, every time brick phone and "secure boot" msg. And go ...
Click to expand...
Click to collapse
Yes, but it's difficult, because Toolkit is able to bump boot.img before installing, but magisk modify Your current boot.
I found script which allow You to bump currently boot.img. So at the begining You flash magisk, and before You will've leaved recovery, You should flash this one: http://forum.xda-developers.com/lg-g2/development/cbump-bump-current-boot-image-t3325186
[Q&A] [Info] Lollipop 5.0.1 G906S/L/K + Root, Fix SMS, Remove Korea app, Theme choos
Q&A for [Info] Lollipop 5.0.1 G906S/L/K + Root, Fix SMS, Remove Korea app, Theme choose v2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Info] Lollipop 5.0.1 G906S/L/K + Root, Fix SMS, Remove Korea app, Theme choose v2. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
where is the download link???
How to download this Rom???
Thanks bro
g906s is camera's focus isnt work can u fix this ?
Dauryenbyek said:
How to download this Rom???
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=95916177934540139
Downloader in ENG
Hi all, I apologize if you already answer to my post there. When I press the Volume Down + Power + Home, going to Downloader. I have a screen with Korean characters. Is it possible to change this to English? Please reference to download. I can update via Odin or TWRP. Many thanks.
Hi! Any infos in English about this rom?
And any info on old KitKat version for G906K?
Thx.
Sent from my Samsung Galaxy S3 GT-i9300 using Tapatalk 4
help
I just flashed the stock rooted lollipop 5.0 rom to my galaxy s5 smg870 a and kept root I like the rom but how do I get a recovery since safestrap is out of the question I just want to be able to boot into recovery. I also would like to have the option to boot into recovery or reboot menu when pressing the power button instead of just seeing the restart or power down button any help would be greatly appreciated
Hi. Im using g906k and i already upgraded to lollipop. But i'm still experiencing the network error problem. I didnt recieve txts or calls sometimes. Can someone help me fix this pls??
hi guys cannot post external link so pm me for simple gx rom for g906
Q&A for [kernel] cm12 sm-t330nu
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [kernel] cm12 sm-t330nu. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
hey Moon!
moonbutt74 said:
okay,
this is built through bliss but seems to do
cm12-kernel-carmilla-linaro-milletwifiue-mb74.zip
https://www.androidfilehost.com/?fid=23991606952595027
Flash in recovery after rom flash. Don't screw it up !
NOTE- for lanscape i recommend setting dpi to 160
I will update my source soon. it is located here
https://github.com/moonbutt74/kernel-milletwifi-choad-warrior
I enjoy calling this my caf-maybe kernel xD
Rotation fixed, i am working this kernel source to see if i can get kexec hardboot functionality working
Please do not ask me questions about overclocking.
This is a temporary offering for @sub77 's LP build for the sm-t330nu milletwifiue
[ROM][UNOFFICIAL][LP5.1.1] CyanogenMod 12.1 Galaxy Tab 4 8.0 [20150430][SM-T330]
http://forum.xda-developers.com/tab-4/development/rom-cyanogenmod-12-1-t3097152
This does not resolve the camera issue but does seem to prevent the reboot which occured before.
Please do not ask me questions about overclocking !
thanks :silly:
m
Click to expand...
Click to collapse
AND MY BOY MULTITASKING PROJECTS NOW. LOL. Is sub77 having the same issue as I am? I get stuck at the samsung launch screen right before my boot animation appears. (If I flash ROM then Kernal) simultaneously through twrp recovery. ---- :\ ----- if I just try to flash the CM 12.1 Unofficial, gives me a soft brick. Trying to look at threads on the issue. It states "cannot find update binary in cm12 file" during some Cm12.1 ROM flash attempts
ThaddNation said:
AND MY BOY MULTITASKING PROJECTS NOW. LOL. Is sub77 having the same issue as I am? I get stuck at the samsung launch screen right before my boot animation appears. (If I flash ROM then Kernal) simultaneously through twrp recovery. ---- :\ ----- if I just try to flash the CM 12.1 Unofficial, gives me a soft brick. Trying to look at threads on the issue. It states "cannot find update binary in cm12 file" during some Cm12.1 ROM flash attempts
Click to expand...
Click to collapse
T,
I use philz recovery, twrp is consistently a giant bag of bugs and i won't touch it..
https://www.androidfilehost.com/?w=files&flid=23544
don't multiflash , do rom, then kernel, then supersu.
m
M
i have seen you posted some issues with MTP mode. i have that problem too and i am using a mac book
regards
Kernel v4
Hey Moon,
Does the 4th version enable over clocking the tablet? In kernel editor I have the option to push the CPU upwards of 1593MHz and the GPU to 533MHz. ! BTW, any new projects? I've been following you and sub77 on this Rom\Kernel but seems like it is getting quiet. I've been fooling around in the system files to see if I can find a fix for this camera. I got rid of Two files in /system/etc/permissions. And had to edit two that I found which were corrupt compared the the other camera files I've been comparing them to. I'm slowly but sure on to something. Let me know if u want to port a Sweet ROM, or Tweak a kernel out, etc. I'm ready!
Thadd.
T,
hi, if you succeed in solving the camera issue, please do a complete detailed write-up on the fix.
For all versions of kernel 2-4 i applied amyren's OC/UV changes , and set ondemand/cfq as default.
I run that kernel in my cm11 build [personal, not release] and it does well, camera up. the break is on the rom side somewhere. [cm12]
i am currently working the LL kernel realease for the sm-t530nu. The kernel for the sm-t330nu [mine] is done.
The source is posted here, https://github.com/moonbutt74/kernel-milletwifi-choad-warrior-rv01
you are absolutely welcome to and encouraged to take it foward, being a bit of a dumb-dumb that's as far as i could get it. :silly:
m