Database Users

[Q&A] [4.4.4] [CM] [09/10] UltimaMod [KTU84P] [i9505/G]

Q&A for [4.4.4] [CM] [09/10] UltimaMod [KTU84P] [i9505/G]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

JohnnyBlack10 said:
Video record stock aosp camera not recording at all! I try snap and the same thing . Full wipe .... can someone check this out?
Click to expand...
Click to collapse
i tried this kernel on miui , cm and samy deluxe on galaxy s4 i9505 , the problem is after 1 - 2 days it makes the phone amazingly fast and i am not exagerating and it reboots it non stop .......

CWM Set_perm some changes failed
Good Afternoon Guys ,
hope someone can help , Trying to install this ROM on an S4 i9505 (JFltexx i believe)
followed the instructions > Wipe Data , Cache , Davlik etc.
Aroma installer runs allows me to pick all the options i want (ive just gone with the defaults for this example)
when it gets to the end it starts the install procedure and then says Set_perm some changed failed. then reboots and then never boots.
something im doing wrong ?
Ive ended up flashing CM11 back onto it , but im having some real bad issues with call quality (mainly people cant hear me or i sound like im in a tunnel)
really want to use this ROM instead but cant get it to install.

Youtube bug !? 720 p dosen t work but 360p is working ( youtube 5.14.11 on wi fi )

Is this rom also work with galaxy s3 shv-e210s? without any prob?

Hey Kryten, since my S3 times I came through the thread to your CM based ROM. Could you provide a screen on Screenshot? General question about the camera, how is the quality compared to GPE?
Sent from my GT-I9505 using XDA Free mobile app

http://forum.xda-developers.com/devdb/project/?id=3324#screenshots
The camera quality is the same as GPE.

CM11 M12
Just noticed its based on CM11 M11... Are you planning updating the cm source to M12 for Ultima before CM12 comes??? (or its just me again not reading and searching that M12 has lots of bugs?)

CM simply haven't updated the vendor information to include the M12 changelog. You can see here: https://github.com/CyanogenMod/android_vendor_cm/blob/cm-11.0/CHANGELOG.mkdn It still uses the M11 changelog. They haven't updated it (probably really busy with CM12).
The codebase was synced and compiled about 7 days ago, so it's very fresh and newer than any M12 ROM.
I won't be releasing a CM12 ROM until there is a milestone release for it. I don't want to deal with buggy ROMs right now.
Apart from that time bug, I haven't had any problems with my ROM. I don't use my S3 at all., I run my S4 daily.
EDIT:
To be honest, I had some stuff planned for features, but I will be holding off now after reading this: http://www.landofdroid.com/2014/cm12-roadmap-leaked-exciting/ As CM won't implement any new features that are submitted. I actually managed to get my call recording codec feature in before then, but only just.

[Q&A] [ROM] Dirty Unicorns 4.4.4 {Grouper} [EXT4/F2FS] [v8.2] 11/04/14

Q&A for [ROM] Dirty Unicorns 4.4.4 {Grouper} [EXT4/F2FS] [v8.2] 11/04/14
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Dirty Unicorns 4.4.4 {Grouper} [EXT4/F2FS] [v8.2] 11/04/14. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

noahthedominator said:
Guys, I've tried flashing this on my Nexus 7, several times and every time it fails and gives me an error that says...
symlink some symlinks failed
E: error in /data/media/0/download
status 7
installation aborted.
I've tried using TWRP and CWM with no luck. I have also tried re downloading and I flashed paranoid android successfully.
If anyone could please give me a solution that would be great.
Click to expand...
Click to collapse
noahthedominator said:
Found out its a problem with twrp. I had to remount and them unmount the system partition and then flash.
Click to expand...
Click to collapse
Been having this issue with the last two versions I think, it doesn't seem to matter how many times it's downloaded.
I've tried the remount,unmount solution via TWRP but doesn't seem to be working on my end...
Also did a bit of searching and kinda curious is that problem with TWRP mentioned anywhere else perhaps with a bit more details?

@spaceman860 I cant download link #1, pls fix it. Thanks u.

link problem
The link seems to have a problem with the port, please fix it. Thank you

I think I found a bug, when rotating from portrait to landscape, camera right side, the navigation buttons disappear but not to the left.

hi there, what is the latest DU gapps for lollipop.?
thank you

Anyway to make the camera work on lollipop?

Thanks,much better and smoother than 5.01, thanks for your support.

Installed successfully, but the posted link to the custom Gapps led to it being stuck on the introduction screen with the "checking connection", so I had to find a better version elsewhere. Also: It doesn't charge past 45%, and I turned the power off and let it sit overnight.

Ok this might be a bit newbyish question but please bear with me. I had been running this rom with little to no problems. Dirty Unicorns lollipop 5.1.1 was recently released so I upgraded. I thought I was all set after the first day or so so I stupidly deleted my nand backup of Dirty Unicorns 4.4.4 v8.2. But after a couple of weeks I've decided I really don't care for the lollipop version and I want to get back to this version. So I wiped Dalvik, Cache, System and Data in the latest version TWRP. I then install the 4.4.4 v8.2 zip and everything looks like it installs fine, but when I reboot I get the Google screen, then it goes black, with the backlight on. It never gets beyond that point. I haven't done anything "special" with any settings so I'm not sure what's happening. I am able restore the nand backup of my lollipop install but I cannot seem to install a 4.4.4 at all. Anyone have any idea what I'm doing wrong? Thanks!

Will it work on nexus 2012 with 5.1.1 stock ?
Will it work on nexus 2012 with 5.1.1 stock ?

is anyone having trouble downloading v9.4? i seem to get a bad download each time.

does it work with tilapia ? any chance?

Same here. Maybe there's a way to disable it?

saltenbuchner said:
does it work with tilapia ? any chance?
Click to expand...
Click to collapse
+1
Skickat från min Nexus 7 via Tapatalk

Overclock
Has anybody had success with overclock on the 5.1.1 ROM? I can't seem to set anything above 1300Mhz. It's pretty fast already but I'm a speedfreak.
Awesome work though, love the ROM.
*note* I would post to the actual thread but...
Code:
Because you have less than 10 posts, the developer of this thread has opted to have replies go to a separate questions and answers thread. Placing your question within the Q&A thread will increase its chances of being answered by a member of the community or by the developer. Once you have more than 10 posts, you can post anywhere.
/Pete

can you add more i/o(sio,zen etc)???
thx

Anybody having problems with 9.7? Whenever I boot the launcher goes fc
Sent from my LeedroidRom-powered HTC One M8

[Q&A] [ROM][UPDATE][26/06] dandroid13's Untouched GPe - [4.4.4] [w/ KT kernel] [FINA

[Q&A] [ROM][UPDATE][26/06] dandroid13's Untouched GPe - [4.4.4] [w/ KT kernel] [FINA
Q&A for [ROM][UPDATE][26/06] dandroid13's Untouched GPe - [4.4.4] [w/ KT kernel] [FINAL]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][UPDATE][26/06] dandroid13's Untouched GPe - [4.4.4] [w/ KT kernel] [FINAL]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

dandroid13 said:
I really don't like the fact that there's no Xposed for 5.0 yet but I'll try to update the rom soon.
Enviado do meu Galaxy S5
Click to expand...
Click to collapse
hopefully we can use the stock kernel I've been using dandroid13 untoched long and trying all the kernels and as the stock does not go either, removing reboots that only I have when I turn off the screen

Someone know if the latest build works with MultiRom? Thanks

dandroid13 said:
First boot takes a long time, it's weird.
Click to expand...
Click to collapse
dontpannic said:
I cant seem to get it to boot. Hangs on the bootscreen. Tried rebooting and leaving it, still no boot. Back of the phone goes cold as though the processor isnt actually doing anything. Will attempt a redownload.
Click to expand...
Click to collapse
Same for me, stuck in bootscreen

hey there, i have 5.0 by danvdh but my phone reboots sometimes and i'd like to habe official Google apps and official music APP. is it possible to just installiert it without wipe
---------- Post added at 09:31 PM ---------- Previous post was at 08:52 PM ----------
can i install it if i already have dandvh's 5.0 without wipe? Does it run stable?

Force reboot -.-
I have forces reboots on my phone, anyone knows why ? -.-

lolipop GalaxyS4 GT_1905 google edition rebooting problem help me!
My galaxy S4 GT-i9505 rebooting frequently by it self .. Do you have any idea to fix? 

Old version 4.4.4
Hi,
can someone send me the link to download the rom Version 4.0 (4.4.4) ?
Thanks.

Can I update later to new version from google?
Hi ,
i wold like to ask one thing if i install this version can i update to latest version once its available ?

Hi there, I use Dandroid's Untouched GPe 5.0 ROM .. I think it is great .. but can someone please help me with this issue: I have a Sandisk 64GB that is completely useless !! Sometimes (not always) my phone does recognize this SD card but I am not allowed to write on this card. Media is not found when I try to read from this card (ie picture gallery .. it says media not found but when I look at the details it says there is content on the SD card). It does not allow me to format this card through Android, it even does not allow me to format this card through Windows .. I do not know what to do now .. I tried so much but till now without any result. Can someone help me out ??!! Thanks ! BTW the card is OK .. I can write and read from it in a windows computer .. strange enough it is impossible to format this card in the same windows pc ...

dandroid13's Untouched GPe - [5.0] [FINAL] Random Reboot
Hy guys!
Amazing ROM, unbelievable, the best, so so clean and fast.
My device is GT-i9505 and I have some Random Reboot, anyone solved it?
Help.... Thanks in advance.

Can i flash it with twrp?

ThiagoSP1984 said:
Hy guys!
Amazing ROM, unbelievable, the best, so so clean and fast.
My device is GT-i9505 and I have some Random Reboot, anyone solved it?
Help.... Thanks in advance.
Click to expand...
Click to collapse
Custom kernel is the only way. Use GoogyMax GE 1.2.7 from the original development section.

The best ROM
This ROM is unbelievable! Very fast and so clean, my i9505G is flying now.
I had some random reboots, now I flashed the Kernel-Alucard-V1.1a-[20-52]-[17-12]-GE-EUR-LP5.0-SGIV-PWR-CORE.zip and I hope that this has solved my problem.

Problems during calls
Hi Guys,
I have a problem, my phone does not respond during calls, if I press any button (Home, Power, Volume) the screen does not wake up.
After the call is ended the phone works perfectly.
What can I do to fix it?

SOLVED this problem using Proximity Fix app on Play Store.
ThiagoSP1984 said:
Hi Guys,
I have a problem, my phone does not respond during calls, if I press any button (Home, Power, Volume) the screen does not wake up.
After the call is ended the phone works perfectly.
What can I do to fix it?
Click to expand...
Click to collapse

hello， where is the superSU?
and how long it takes to reboot? mine is just keeping show the starting screen

Thank you master, great.
---------- Post added at 10:22 PM ---------- Previous post was at 09:28 PM ----------
Hi, I have done everything correct installation, but does not leave the home.
It stays there tossing and turning over 40mnts not start for the first time.
Any solution?
The colors are turning only.
Thank you very much.

[Q&A] [ROM][All-F2FS] SlimKat with All-F2FS support [02/05/14]

Q&A for [ROM][All-F2FS] SlimKat with All-F2FS support [02/05/14]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][All-F2FS] SlimKat with All-F2FS support [02/05/14]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

new version for slim f2fs
Hi, sorry for my stupid question, I'm newbie.
There is a new version for F2FS other than Slim-grouper-4.4.2.build.4.8-WEEKLY-3876-F2FS.zip?
On slim website is Slim-grouper-4.4.4.build.8.10-WEEKLY-7760, but without F2FS.
If I install 4.4.2, can I update from ota to 4.4.4 without problems?
thank you in advance,

ASUS NEXUS 7 3G with 4.4.2 update to 4.4.2 with f2fs / slimkat (Slim-grouper-4.4.2.build.4.8-WEEKLY-3876-F2FS.zip)
after update running well, but I discover two bugs:
1. No 3G after update (only WiFi)
2. I try to update from ota with fail (as was expected), but every time after restart/power on, it downloads the update
How can I solve the two issues? Get the 3G part and stop download the update.
Thank in advance

anyone?

FLONE said:
ASUS NEXUS 7 3G with 4.4.2 update to 4.4.2 with f2fs / slimkat (Slim-grouper-4.4.2.build.4.8-WEEKLY-3876-F2FS.zip)
after update running well, but I discover two bugs:
1. No 3G after update (only WiFi)
2. I try to update from ota with fail (as was expected), but every time after restart/power on, it downloads the update
How can I solve the two issues? Get the 3G part and stop download the update.
Thank in advance
Click to expand...
Click to collapse
Find out how to root your device (tilapia), and then find out how to do a clean install.
Sorry not much info. I use the nexus 7 wifi (grouper) so things might be different

eesadroid said:
Find out how to root your device (tilapia), and then find out how to do a clean install.
Sorry not much info. I use the nexus 7 wifi (grouper) so things might be different
Click to expand...
Click to collapse
it was a clean install, i wll do it again

FLONE said:
it was a clean install, i wll do it again
Click to expand...
Click to collapse
my fault, I install grouper, not tilapia

Can anyone guide me how can I do a stock nakasig-ktu84p-tilapia-4.4.4 with All-F2FS?
I make a build, but I'm missing something, because after flash doesn't start. Can someone look into it, if I will put to a host?
thanks

Just to say this rom 4.4.2 and the faux123 kernel just scored 24107 on antutu 5.5, something I have not seen around yet. Thanks for your work.

New to custom ROMs
Hey all, this is my first experience with a custom rom. First off, thanks for resurrecting my dying Nexus 7! Works like a dream now.
Same question as above, I'm getting notices of updates from SlimKat and Google. I assume I should ignore/disable those - anybody know a good guide for disabling that stuff? I should get the newer SlimKat+F2FS updates direct from the Legolas thread, right?
Second, I've found out that my device is no longer compatible with some stuff - mostly Rovio games. What gives?
Thanks for any help you can give.

Doesn't have keyboard
'Hi, I flash this rom but it doesn't have keyboard to enter wifi password, it's only have google text speech. What can I do?
Regards.

hello,
is there a way to do this on a mac? i have cm11 on my device and it is fully rooted. can i copy it over cm11 or must i wipe cm11 out of it? thx.

Hey , have you convert the slimkat rom to the f2fs partition system?
without that you can not boot it (same on my nexus7).
After converting the rom all is fine and the rom will boot.

[Q&A] [ROM][9005][5.0_lollipop_TW XXUGBNL8]CivZ Flex_Lollipop Rev1.4 - Aroma [07/jan

[Q&A] [ROM][9005][5.0_lollipop_TW XXUGBNL8]CivZ Flex_Lollipop Rev1.4 - Aroma [07/jan
Q&A for [ROM][9005][5.0_lollipop_TW XXUGBNL8]CivZ Flex_Lollipop Rev1.4 - Aroma [07/jan/2015]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][9005][5.0_lollipop_TW XXUGBNL8]CivZ Flex_Lollipop Rev1.4 - Aroma [07/jan/2015]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Battery life is great
Hello,
battery life is great. No problems if you do a wipe before flashing.
Swannika

Hello
Any way to disable the earphone fix? I'm getting a lot of static.
Sent from my SM-N9005 using XDA Free mobile app

Anyway to flash it on a N900w8?
Tried searching but found nothing.
Thanks!
Enviado desde mi SM-N910C mediante Tapatalk

V1.5 have bugs such as:MY Magazine can't into details report.
V1.5 have bugs such as:MY Magazine can't touch for into details neww report then v1.4 have bugs.

Not shiw data traffic
Hello,
thanks fir the great work. What do I have to do to not see data traffic in status bar?
Swannika

APPS to sharing google drive some bugs breaking (Stop) upload files.
APPS to sharing google drive some bugs breaking (Stop) upload files.
How to fix it?
Thanks a lot.

Data traffic in status bar
Hello,
Thank you for the room. I like it very much.
Since last version I see data traffic in status bar. Can I delete this?
Swannika

i nstalled the rev 1.3 of your Rom and really was very good but have problem with camera it doesn't record video and get black screen..then stop
after that i istalled rev 1.5 the new one and still the problem

i nstalled the rev 1.3 of your Rom and really was very good but have problem with camera it doesn't record video and get black screen..then stop
after that i istalled rev 1.5 the new one and still the problem

Boot animation
Hello,
I would like Lollipop boot animation, how?
Thanks

Skip song with volume toggle
Hello,
the rom is great. Thanks. One thing I miss in lollipop rom with ist TW ist the possibility to skip songs with the volume toggle. Is there a chance to implantate?
swannika

Need help after Install
I just installed this rom (v1.5) and followed every step as in the instruction ... but after getting to the home screen I can't see the notification panel nor the wallpaper(it's in black) also the recent app drawer doesn't work .... what's wrong ?

Going back to CivZ's Flexkat rom. So much more stable. Will wait for future updates for this rom though.

5.0 russian rom so better .. 7 hours of screen time.

@civato is it possible to have mod with mute sound and new setting like aryarom or not?

yellowish color
After flashing the kernel I get a yellowish color on my screen...
How can I fix it?

Installed ROM and kernel earlier.
So far so good, super stable, no fc and battery also seems good.
Maybe the best I've tried so far.

I've tried to install kernel version 1.3 and 1.4 and in both cases the installation is aborted. I'm using Philz touch recovery 6.0.4.7
After the process is aborted I can reinstall both stock and custom 1.1B with no problem at all.
I don't know what I am doing wrong.
Help please.
Thank you mate, and keep up the good work.
Sent from my SM-N9005 using XDA Free mobile app
Fixed the issue using twrp... Just installed version 1.6

Which one of these regions suitable for the Arab region ?