Related
Hey guys,
I'll put it as simple as I can :
-no SIM service whatsoever. Happened a few hours after i flashed Androidmeda ROM. no clue if thats the reason
I tried:
- restart
- wiping all caches and data
- factory reset ( 3 different ways )
- flashed 3 other ROM's
- recovered a very old nandroid backup i found
- drained the battery, recharged fully
- left battery out for a few hours
- slapped it around (gently)
Im drained out of ideas. Any clues? anyone?
Thanks in advance
Sim card in slot .
Check you have the correct network settings .
Check IMEI is the original one .
Wrong IMEI restore your backed up EFS folder .
jje
hey. u were right about the IMEI. It says unknown/unavailable on all IMEI, IMEI SV, WiFi MAC, Bluetooth addr. and baseband.
Just one Q.
what is and EFS folder and what if i did not back it up?
JJEgan said:
Sim card in slot .
Check you have the correct network settings .
Check IMEI is the original one .
Wrong IMEI restore your backed up EFS folder .
jje
Click to expand...
Click to collapse
How can I back it up?
bahkata said:
hey. u were right about the IMEI. It says unknown/unavailable on all IMEI, IMEI SV, WiFi MAC, Bluetooth addr. and baseband.
Just one Q.
what is and EFS folder and what if i did not back it up?
is rule one backup efs folder so you can restore your IMEI ..
The /efs folderThe /efs folder is a folder in your phone that contains information specific to YOUR phone, for example your IMEI number, product number, Wireless MAC addresses, and much more. There have been reports of people messing up their /efs folder when unlocking their phone or flashing new ROMs, here is an example from the Nexus S development forum (jump to page 111 to see everyone start to panic):
http://forum.xda-developers.com/show....php?t=1034130
Therefore, it is important to make a backup! Instead of just regurgitating guides on the forums already, here is a link to a very good one by Rawat:
http://forum.xda-developers.com/show....php?t=1068193 (Rawat)
The easiest way of doing it is by using terminal emulator rather then ADB (unless you have ADB all up and running and are confident with it)
You need to search the other multitude of IMEI posts see if you can find a fix .
If not its a service centre repair if you have proof of ownership and no custom rom and no root and custom rom counter set to zero .
jje
Click to expand...
Click to collapse
Is there someone who has a stock U8800-51 (Impulse 4G)
Users here need files from the stock froyo rom. If you have one please reply. Thanks!
Sent from my u8800pro using xda premium
I have two of U8800-51 here in Russia with Android 2.2.2 bought from eBay, never flashed but unlocked. If you tell me what to do i will provide you with all you need.
savagehq said:
I have two of U8800-51 here in Russia with Android 2.2.2 bought from eBay, never flashed but unlocked. If you tell me what to do i will provide you with all you need.
Click to expand...
Click to collapse
Please do a full backup of the bootloader! So we all can fix our device..!
The procedure is easy and you just take about 8 minutes..
You have to download this tool (for windows) http://www.roadkil.net/program.php?ProgramID=12
1- Download the tool "Roadkil's Disk Image"
2- Enter to pink screen (volume up and down, then power on)
3- Connect your phone to the computer through the backside usb port (its more safe)
4- Run the tool
5- Click on the "Store Image" tab.
6- In "Store Image to" click the combobox and choose "Physical Disk #" ("#" is a number) * If there are more than one "Physical Disk #", then you have to choose the one that is about 3.6gb.. This part is very important.. if you give us a backup from another disk, it will leave our phone unusable. *To be sure that that Physical Disk you choose is the Huawei u8800-51, You can run the tool again (because it has to refresh) without the phone connected, then check which disks are available. Then, close the tool again, connect the device (in pink screen), run the tool, and check what physical disk was added. But it will be about 3.6gb.
7- In "target file", save the file as "u8800.img" in a folder with more than 4gb of storage available.
*There is no risk for you, as it is just data copying, not writting. The risk is for us if you gave us a wrong file hehe..
*If you compress the "u8800.img" file into a "rar" file, the size will be about 700 mb, then please, upload the file into mediafire or some file hosting service.
Thanks man! It will be very useful to many people!
----
*For the ones who do the restore from the file, they have to do something to get the "u8800.img" to work. I will post here what do they have to do before writing to the disk, so Don't restore until I explain it here, or it wont work! and you may have errors!
Done. Download it from here (i can't post link as i have only two posts) h-t-t-p://narod.ru/disk/45137127001.c41110d6962cdd0386662315635cdcc4/u8800-51.rar.html. Anything else i can do? BTW i can test in on my third u8800-51 with custom rom if you provide me with instructions.
Great man! Thank you very much. nothing else, yo have done more than enough! Cool
How to flash the phone with this image? Please help, i need to restore one u8800-51
Restore IMEI and radiomodule
I`m from Russia, sorry for my english
I have too U8800-51 (Impulse 4g) from USA. I bricked him after flash U8800 firmware. I rebuilt my U8800-51 in service center and flashed "U8800-51_dload Froyo Original" and my firmware was from U8800pro. And also changed my IMEI and stopped working 3G and GPS.
Before bricked I am backup my original IMEI with "ToolBox5iromV1.0.4.2.apk".
Today I restored my IMEI from my backup. With the IMEI restored RADIO module (№ 203022) and again began to work 3G and GPS. I am so happy now.
You can do it too:
1. Do the ROOT with "DooMLoRD_v3_ROOT_zergRush_busybox_su.zip".
2. Install "ToolBox5iromV1.0.4.2.apk".
3. Restored your IMEI or my IMEI (if you want) with original radio module of U8800-51 (Impulse 4G) AT&T.
My IMEI link: narod.ru/disk/45304379001.3238bc381c90a94603de19359eda2e72/IMEI_U8800-51_(Impulse_4g)_ORIGINAL_buckup.zip.html
3g worked for you in u8800pro rom? So thats the key! Maybe we can have u8800pro gingerbread with 3g working that way
skipped said:
3g worked for you in u8800pro rom? So thats the key! Maybe we can have u8800pro gingerbread with 3g working that way
Click to expand...
Click to collapse
I restored his IMEI backup and I don't get 3g
I'm not going to try, too dear to me repair my phone - $100
In RF and EU 3G - UMTS2100.
My Radio version changed from 203023 to 203022.
Working HSDPA, HSUPA. HSPA+ probably not works, but in RF not working HSPA+.
You can to try restore my IMEI, before backup your IMEI and if 3G not workingб you return back IMEI
Skipped, can you do a backup of your IMEI when running froyo. Ill restore it and see if I get 3G
KayxGee1 said:
I restored his IMEI backup and I don't get 3g
Click to expand...
Click to collapse
Maybe the IMEI backup of Impulse will get 3g to work only in u8800pro 2.2 stock rom, not gingerbread.. someone should try that.
KayxGee1 said:
Skipped, can you do a backup of your IMEI when running froyo. Ill restore it and see if I get 3G
Click to expand...
Click to collapse
The other guy already backed up his IMEI
Do you have the files to downgrade to U8800-H1 froyo yet?
I posted a guide..
http://forum.xda-developers.com/showthread.php?t=1589205
skipped said:
I posted a guide..
http://forum.xda-developers.com/showthread.php?t=1589205
Click to expand...
Click to collapse
Followed the guide and now I'm running froyo with working 3G/4G!
Anyone have a working link???
I really was glad to find this post, only to find that the link that may have originally worked only downloads a virus to your pc.
I really hope someone has a restore image that I could use. I am bricked until I find a working one.
KayxGee1 said:
Is there someone who has a stock U8800-51 (Impulse 4G)
Users here need files from the stock froyo rom. If you have one please reply. Thanks!
Sent from my u8800pro using xda premium
Click to expand...
Click to collapse
After much searching I found this:
http://forum.xda-developers.com/showthread.php?t=1589205
LINK OFF
savagehq said:
done. Download it from here (i can't post link as i have only two posts) h-t-t-p://narod.ru/disk/45137127001.c41110d6962cdd0386662315635cdcc4/u8800-51.rar.html. Anything else i can do? Btw i can test in on my third u8800-51 with custom rom if you provide me with instructions.
Click to expand...
Click to collapse
link offline, help me please
Hey Guys,
The Admins decided to basically add the Charm forums into the Flipout forums, so far only the main forum heading has been changed, hopefully the admins will do the rest of the changes soon.
In the meanwhile, i thought it would be useful to post useful threads on the charm porting, basically since flipout and charm are the same phone with a different design, these should be applicable with respective changes to flipout also.
[Guide] Update any Motorola Charm to lates T-Mobile firmware (Working 2G / 3G)
Author : victory144
Thread : http://forum.xda-developers.com/showthread.php?t=1384837
Content :
victory144 said:
[URL="http://support.t-mobile.com/docs/DOC-1741"]List of improvements, from T-Mobile Documentation.
[/URL]
I AM NOT RESPONSIBLE FOR ANY DAMAGE THAT THIS GUIDE MAY CAUSE. TESTED AND WORKING. FOLLOW AT YOUR OWN RISK!
Warning: Flashing T-Mobile sbf will update the Bootloader, so cant downgrade or flash other sbf.
This guide is for update any Motorola Charm w/o brand to the latest T-Mobile update with fully working 2G/3G network, and get many improvements (Best of all Stability and Battery).
If you have official US T-Mobile Charm you don't need this. as it can be updated normally.
Requirements:
* Any sbf file that currently work (2G/3G) with the corresponding Mobile Providers Link.
* T-Mobile 03.90.7 BLUR firmware sbf file. Link from the Wiki.
* RSD Lite 4.6 Link from the Wiki.
* Moto Android Depacker Link.
* SuperOneClick for Root Internal link.
* Root explorer NO LINK! (Or via ADB).
Click to expand...
Click to collapse
Guide:
A- Backup from the running firmware.
1. Root the phone (any method).
2. Install Root Explorer (alternatively can use ADB or terminal emulator).
3. Backup this folder and save a copy in the computer. "etc\motorola\bp_nvm_default".
Click to expand...
Click to collapse
B- Extract BP from the sbf (That currently work with your 2g/3g network).
1. Open Motorola Android Depacker --> Open From File -->Browse the sbf
2. Click "Split To Folder" this will generate a folder with the same name of the sbf.
3. Remove all split files except this one "CG45.smg" (BP Firmware file).
Click to expand...
Click to collapse
C- Mod T-Mobile sbf.
1. Open Motorola Android Depacker --> Open From File -->Browse the sbf (T-Mobile one).
2. Click "Split To Folder" --> browse to the splitted folder.
3. Replace and overwrite the "CG45.smg" with the one from B.
4. Open Motorola Android Depacker --> "Open File Folder" --> Browse T-Mobile split folder.
5. Click on "Compile File" this will generate "firmware.sbf" with BP that work with the phone.
Click to expand...
Click to collapse
D- Install T-Mobile Mod sbf.
1. Backup any needed phone data.
2. Install and open RSD Lite --> Click on "..." --> Browse to "firmware.sbf"
3. Connect the phone to the computer.
4. Wait until phone show as connected in the RSD Lite--> click "Start".
5. Wait until RSD Lite finish. --> Configure "Moto blur" account.
Optional: It's possible to restore "clockworkmod" backup using polovinamozga's Bootstrapped Recovery.
http://forum.xda-developers.com/showpost.php?p=14796425&postcount=412
Click to expand...
Click to collapse
E- Restore network.
1. Root the phone (using SuperOneClick).
2. Install Root Explorer.
3. Copy this folder from step "A" to the SD Card "bp_nvm_default".
4. open Root Explorer --> Navigate to "sdcard" --> navigate to "bp_nvm_default" folder.
5. "Multi-select" these files:
File_Audio
File_Audio2
File_GSM
File_Seem_Flex_Tables
generic_pds_init
Click to expand...
Click to collapse
6. Then press "Copy" --> Navigate to "etc\motorola\bp_nvm_default" --> "Mount RW".
7. Paste --> Overwrite all the files.
8. IMPORTANT Select all copied files (from step E-5) and change permission to rw-r--r--.
9. Reboot phone...Then add the APN of the corresponding network provider.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Credit for all Tools Creator.
Sorry about any grammatical/spell English error.
Click to expand...
Click to collapse
Credits to the respective author and aforementioned credits.
Thanks for the clear guide. Had a lot of difficulty with this back a year or two ago when I first got my Charm.
Does anyone know if the T-Mo (1700/2100) and 850/1900/2100 Charms have any hardware differences? Or is the 3G bands support purely in software?
I'm actually wondering if it's possible to do the opposite of this guide. That is, flash my existing deblur SBF, but with the T-Mobile BP files, to convert my Telus Charm into one that works on T-Mobile/Wind/Mobilicity.
ergosteur said:
Thanks for the clear guide. Had a lot of difficulty with this back a year or two ago when I first got my Charm.
Does anyone know if the T-Mo (1700/2100) and 850/1900/2100 Charms have any hardware differences? Or is the 3G bands support purely in software?
I'm actually wondering if it's possible to do the opposite of this guide. That is, flash my existing deblur SBF, but with the T-Mobile BP files, to convert my Telus Charm into one that works on T-Mobile/Wind/Mobilicity.
Click to expand...
Click to collapse
yes you can but you will have to download telus sbf and T-mobile sbf, then replace firmware of t-mo sbf with that of the telus then copy bp files from telus to t mo, its given in the guide.
but after flashing t-mo ROM you can flash any other sbf other than. t mo as the bootloader gets updated.
but you could try the reverse to obtain a telus ROm working on T mo. Don't have either of these, so can't test it out also.
Cool, thanks. Will try it and report back.
Sent from my Galaxy Nexus using xda premium
Link to the sbf file is dead.
So this is supposed to enable 3g internet connection as well?.. i did everything and managed to use 2g and 3g to calls and sms.. but i cant see the internet connection option..
eetu1923 said:
So this is supposed to enable 3g internet connection as well?.. i did everything and managed to use 2g and 3g to calls and sms.. but i cant see the internet connection option..
Click to expand...
Click to collapse
You'll need to update the apn settings for your carrier. Look around on the forums or search web, there are instructions. Your carrier's website could be helpful too, for example Bell Mobility (Canada): http://support.bell.ca/Mobility/Sma..._Nexus_One_for_the_Bell_Mobility_HSPA_network
ergosteur said:
You'll need to update the apn settings for your carrier. Look around on the forums or search web, there are instructions. Your carrier's website could be helpful too, for example Bell Mobility (Canada): http://support.bell.ca/Mobility/Sma..._Nexus_One_for_the_Bell_Mobility_HSPA_network
Click to expand...
Click to collapse
Well my Carrier is Telcel in Mexico, but i have already created the APN settings for it.. but thers no option to turn on the data services... in some other forum they told me that the baseband frecuencies arent compatible and the only way of getting my 3g data back is to restore the device to the original LATAM firmware.. which i guess im not able to do since i cant go back from the TMOBILE bootloader..
PLease tell me im wrong and that there is a way of doing this..
Im gbuessing maybe sending it to motorola and they could do some magic?...
eetu1923 said:
Well my Carrier is Telcel in Mexico, but i have already created the APN settings for it.. but thers no option to turn on the data services... in some other forum they told me that the baseband frecuencies arent compatible and the only way of getting my 3g data back is to restore the device to the original LATAM firmware.. which i guess im not able to do since i cant go back from the TMOBILE bootloader..
PLease tell me im wrong and that there is a way of doing this..
Im gbuessing maybe sending it to motorola and they could do some magic?...
Click to expand...
Click to collapse
Hmm, weird, so you copied the bp_nvm_default files as above, and your 3G is working for calls but not for data?
Maybe try re-flashing the ROM?
I have a Charm that was originally on Telus (Canada), they use the same frequencies as Telcel (850/1900) for HSPA. Flashed the T-Mobile sbf and lost 3G, but replacing the bp_nvm_default files made the 3G work with Telus again. Took a couple of tries though - it's a bit finicky. Had to re-flash T-Mobile ROM a couple of times before the mod worked.
ergosteur said:
Hmm, weird, so you copied the bp_nvm_default files as above, and your 3G is working for calls but not for data?
Maybe try re-flashing the ROM?
I have a Charm that was originally on Telus (Canada), they use the same frequencies as Telcel (850/1900) for HSPA. Flashed the T-Mobile sbf and lost 3G, but replacing the bp_nvm_default files made the 3G work with Telus again. Took a couple of tries though - it's a bit finicky. Had to re-flash T-Mobile ROM a couple of times before the mod worked.
Click to expand...
Click to collapse
You are giving me hope here hehe ..
Well i did replaced the bp_nvm_default files...
You see after the flash of the Tmobile rom i had to do that in order for the phone to recognize the Telcel network.. so after i replaced the bp_nvm_default files, it worked and i can make calls.. and access 2g and 3g networks..
Then i went to wireless settings and added the APN info for telcel.. MMS, GPRS, and 3G... Everything ok there or so it seems..
Then i went to Data Delivery Settings.. but there is no option to turn off the Data services for 3g or 2g for that matter...
I have seen this in some other T Mobile roms (in a droid 2)....
Any clues..?? do you have a way to enable 3g data in your settings?...
eetu1923 said:
You are giving me hope here hehe ..
Well i did replaced the bp_nvm_default files...
You see after the flash of the Tmobile rom i had to do that in order for the phone to recognize the Telcel network.. so after i replaced the bp_nvm_default files, it worked and i can make calls.. and access 2g and 3g networks..
Then i went to wireless settings and added the APN info for telcel.. MMS, GPRS, and 3G... Everything ok there or so it seems..
Then i went to Data Delivery Settings.. but there is no option to turn off the Data services for 3g or 2g for that matter...
I have seen this in some other T Mobile roms (in a droid 2)....
Any clues..?? do you have a way to enable 3g data in your settings?...
Click to expand...
Click to collapse
Gave my Charm to my brother. I can probably check with him tomorrow and report back.
ergosteur said:
Gave my Charm to my brother. I can probably check with him tomorrow and report back.
Click to expand...
Click to collapse
Please doo
Hey guys, I got stuck on T-Mo firmware T-Mobile_MB502_02.60.5_1FF_01, trying to unlock my phone but the band of my operator is for 850-1900, so no phone calls.
I followed this tutorial and it looks that it worked but after RSD finishes and restart the phone, I'm geting the message "SIM network unlock phone" does this means that:
--- it is recognizing the band of my operator (Claro - Colombia) but I need to use one of the services that offers the unlock code like "unlockallcellular.com"?--- that was the point of doing the flash anyways...
or
--- for step "E- Restore network" I need the files from the - "bp_nvm_default" - folder from a actual working Charm on my network? I'm using the ones given on http://forum.xda-developers.com/showthread.php?t=903969&page=4 (TELUS) is there any unlocked ones?
or
--- Am I doing anything wrong? :crying::crying::crying::crying: I've done the procedure like 10 times...
Thanks in advance for any help!!!
Hi. So here's the thing:
I was trying to unlock my Samsung Galaxy S4 GT-I9505 and I kinda messed up. I chose the DM/DUN/RmNet over HSUSB option from the *#9090# where it said that all NV data will be erased, and I chose YES. Then after reboot, I didn't get any signal from my carrier. I've tried other SIMs, but nothing changed.
Then I found out that I needed an EFS backup or something like that, which unfortunately I didn't make.
I tried flashing the original stock rom (MDE), but nothing happened. I updated the rom to MDM, but then the baseband version became unknown and the IMEI number became NULL. So I flashed the MDE rom again and I got the IMEI and baseband version back. Then I tried to root my phone. Root was successful, so I tried to use EFS Professional. I backed up everything, and restored but nothing changed,
I know the phone reads the SIM card because I can see the SIM Toolkit change to the carrier's. The problem is I don't get any signal.
Can anyone please help me?
Did you ever get any info or help with this?
poopsmcgee said:
Hi. So here's the thing:
I was trying to unlock my Samsung Galaxy S4 GT-I9505 and I kinda messed up. I chose the DM/DUN/RmNet over HSUSB option from the *#9090# where it said that all NV data will be erased, and I chose YES. Then after reboot, I didn't get any signal from my carrier. I've tried other SIMs, but nothing changed.
Then I found out that I needed an EFS backup or something like that, which unfortunately I didn't make.
I tried flashing the original stock rom (MDE), but nothing happened. I updated the rom to MDM, but then the baseband version became unknown and the IMEI number became NULL. So I flashed the MDE rom again and I got the IMEI and baseband version back. Then I tried to root my phone. Root was successful, so I tried to use EFS Professional. I backed up everything, and restored but nothing changed,
I know the phone reads the SIM card because I can see the SIM Toolkit change to the carrier's. The problem is I don't get any signal.
Can anyone please help me?
Click to expand...
Click to collapse
I did the same thing. I did make a NV Backup. Copied them back but that didn't change the no signal problem. I have tried odin back stock root and unrooted. Some how you have to get out of the DM/DUN/RmNet over HSUSB setting and back in DM/DUN over HSIC but I can't find a way. Can you get into the *#9090# without it being blanked out settings?
Did either of you ever manage to solve this? I have the same problem.
I bought a new phone for my girlfriend a s4 and copied the nv items from her new phone to my phone. I had service, changed esn spc and reflashed my phone. Everything is working great now
Sent from my SPH-L720 using XDA Premium 4 mobile app
Great news! Any chance of getting a copy of the NV items so I can try this aswell?
madmediapro said:
I bought a new phone for my girlfriend a s4 and copied the nv items from her new phone to my phone. I had service, changed esn spc and reflashed my phone. Everything is working great now
Sent from my SPH-L720 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi , can u plz tell me where is nv_data on s4 i9505 bcoz i can't see nv_data on i9505 efs folder.
If snow is coming in like its suppose to in va tomorrow. If not I will do it this weekend. I will tell everyone in detail what I did and what programs I used to restore my phone to get service back on my phone.
Sent from my SPH-L720 using XDA Premium 4 mobile app
That would be amazing. I look forward to your post.
i'm looking forward to your post.
madmediapro said:
If snow is coming in like its suppose to in va tomorrow. If not I will do it this weekend. I will tell everyone in detail what I did and what programs I used to restore my phone to get service back on my phone.
Sent from my SPH-L720 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have to start out by saying that my phone is Sprint Samsung S4(SPH-L720). I’m not sure if this is going to help you. I came here for help. Hoping that I can help out because this site has helped me so much the last four year I have been here. And of course I’m not responsible in anyway for what you do to your device. Just posting what I did to fix my phone. Programs used Win7 64-bit (WIN XP should work), Odin3 v3.07, EFS_Professional_2.0.72, QPST 2.7 Build 422, HxD, DFS CDMA Tool Demo.
My old phone and new phone I bought did not have knox bootloader on them.
First thing I did to both was flash (Oldest Firmware) SPH-L720_MDC_Rooted_Restore.tar.md5 with Odin3 v3.07. Updated both SuperSU and BusyBox from PlayStore on both phones.
Then I used EFS_Professional_2.0.72 to Backup all NV Items from new phone that had cell service. Turned phone off and pulled battery. Then Formatted all NV Items on old phone and restored backup from new phone. Restarted and had cell bars in status bar. So I knew I was good to good with flashing my service back on the device.
Using QPST 2.7 Build 422, HxD, and DFS CDMA Tool Demo verison will work just fine to do what you need to do. Go to Device Manager and find what com port your device is on. Open QPST Configuration click “Add New Port…” the com port will not be visible but if you type “COMXX” in both port and port label it will be added to qpst configuration. Example is my port COM23 so I added COM23. Close window and open DFS connect com and send spc and pwd close DFS. Note: “You have to send SPC then Pwd with DFS before using any programs on QPST.” Open EFS Explorer send spc go to directory nvm\num copy items 0 85 1943 to desktop. Use HxD to zero out items. Then delete items from nvm\num directory on EFS Explorer. Then copy the zeroed out items back to phone. Reset phone and open DFS and restore original setting that came with the phone. You should be able to restore MEID, ESN, SPC, and IMEI with DFS.
I hope XDA Developers will understand that this is just restoring your phone back to original state. That is exactly what I did. Hope this helps you.
madmediapro said:
I have to start out by saying that my phone is Sprint Samsung S4(SPH-L720). I’m not sure if this is going to help you. I came here for help. Hoping that I can help out because this site has helped me so much the last four year I have been here. And of course I’m not responsible in anyway for what you do to your device. Just posting what I did to fix my phone. Programs used Win7 64-bit (WIN XP should work), Odin3 v3.07, EFS_Professional_2.0.72, QPST 2.7 Build 422, HxD, DFS CDMA Tool Demo.
My old phone and new phone I bought did not have knox bootloader on them.
First thing I did to both was flash (Oldest Firmware) SPH-L720_MDC_Rooted_Restore.tar.md5 with Odin3 v3.07. Updated both SuperSU and BusyBox from PlayStore on both phones.
Then I used EFS_Professional_2.0.72 to Backup all NV Items from new phone that had cell service. Turned phone off and pulled battery. Then Formatted all NV Items on old phone and restored backup from new phone. Restarted and had cell bars in status bar. So I knew I was good to good with flashing my service back on the device.
Using QPST 2.7 Build 422, HxD, and DFS CDMA Tool Demo verison will work just fine to do what you need to do. Go to Device Manager and find what com port your device is on. Open QPST Configuration click “Add New Port…” the com port will not be visible but if you type “COMXX” in both port and port label it will be added to qpst configuration. Example is my port COM23 so I added COM23. Close window and open DFS connect com and send spc and pwd close DFS. Note: “You have to send SPC then Pwd with DFS before using any programs on QPST.” Open EFS Explorer send spc go to directory nvm\num copy items 0 85 1943 to desktop. Use HxD to zero out items. Then delete items from nvm\num directory on EFS Explorer. Then copy the zeroed out items back to phone. Reset phone and open DFS and restore original setting that came with the phone. You should be able to restore MEID, ESN, SPC, and IMEI with DFS.
I hope XDA Developers will understand that this is just restoring your phone back to original state. That is exactly what I did. Hope this helps you.
Click to expand...
Click to collapse
Thanks for sharing and i don't think it will work on my device i9505 but i do appreciate the work u have shared thumbs up.
I still think this may work. I want to attempt but I need a known good EFS pro backup from an i9505. Unfortunately it's not that easy to convince any of my friends to let them tinker with their phones. If somebody could send me one to try I would be hugely grateful.
d3v147 said:
I still think this may work. I want to attempt but I need a known good EFS pro backup from an i9505. Unfortunately it's not that easy to convince any of my friends to let them tinker with their phones. If somebody could send me one to try I would be hugely grateful.
Click to expand...
Click to collapse
Using an EFS backup on two phones simultaneously will result in blacklisting of both mobile devices.
So do not try to restore an EFS backup from an usable phone..
AlanDS said:
Using an EFS backup on two phones simultaneously will result in blacklisting of both mobile devices.
So do not try to restore an EFS backup from an usable phone..
Click to expand...
Click to collapse
I did seem MadMediaPro did not encounter this. Also it is unlikely to occur if a SIM is never inserted in the phone. The other possibility is hex editing out the IMEI in the backup.
This guide is for those who have lost their IMEI, have corrupted EFS, or erased EFS partition. So, follow these under your own risk, it may or may not work, and if something happens or doesn't happen, then i am not to blame. So, once again i will not take credit for bricked phones or something along those lines, however i will take full credit if this works for you. I will also provide assistance to those who could not restore their EFS following this guide.
Before proceeding with this guide, backup what you have left. Use twrp to backup and in case something goes wrong and your problem escalates, you can restore using twrp backup.
Restore EFS
Change IMEI Number
Restore EFS
Do this if and only if you believe your EFS is corrupted, or you somehow erased it. If you are not sure about it, then simply follow the next guide to change you IMEI number. In most cases people loose their IMEI only and not the whole partition. Again, it may or may not work, so do this on your risk, and i am not to blame if anything bad happens, but if you do succeed, then don't forget to give me credit.
Note:
If your EFS is erased or corrupted, your IMEI and Baseband will be shown as unknown. In this case recover the EFS following this post, and then change the IMEI following the next post. If your IMEI is shown as 0, then you EFS is safe and most probably your IMEI is gone. In that case, no need to recover EFS, only change the IMEI number following my next post.
In TWRP, backup of kate wont show on kenzo and the backup up kenzo wont show on kate. In case no backup is shown even if you are using the right device, then try the dump flashing method or try changing the TWRP recovery.
Flashing this will only restore your EFS partition, but the IMEI will still be gone, so you will have to follow the next guide to change your IMEI.
Even after flashing a new EFS, you Mac and BT address will not recovery. The android system will assign a software generated address to both devices. Dont worry cause even without the EFS partition there will be a Mac and BT address assigned to your device and both the things will work normally.
If your Baseband is still unknown, even after flashing a new EFS, then try flashing latest radio file. It can be found in any firmware update package, either the official or the one from the strix.
1. Download the required files from the link given below.
EFS Backup[Kenzo] - Contact me if someone has backup of this.
EFS Backup[Kate] - Contact me if someone has backup of this.
2. Extract the Dump Backup files and flash them using the following commands.
Code:
fastboot flash modemst1 modemst1
fastboot flash modemst2 modemst2
3. Now reboot and voila you have you a new EFS partition at your disposal.
Change IMEI Number
Requirements:
Root
USB Debugging is turn on
Windows Driver Signature is turned off
ADB and Fastboot Binary Files
Latest MiFlash Installed for the latest drivers
1. Connect your device to pc and open the adb folder. Then open a command promt window.
Code:
>> [B]Shift + Right Click[/B] anywhere in the adb folder
>> Click on [B]Open Command Window Here[/B]
2. Type the following command to enable Diagnostics mode. Allow debugging if asked.
Code:
adb shell
su
setprop sys.usb.config diag,adb
4. Download the IMEI Changer from the link given below.
IMEI Changer [Credit: Archeolot]
5. Now, open the imei changer, and enter imei number in both the fields. And click on start. After a moment it will show as passed. If it fails make sure that you have followed the points i stated.
Note: Make sure that the driver in driver management under ports is listed as "Qualcom HS-USB Android DIAG 901D" and not as "Marshall London HS-USB Android DIAG 901D". If it is listed in any other name, then go to driver management and update driver. Select browse driver, then let me pick driver from a list. Then select "Qualcom HS-USB Android DIAG 901D" and then finish.
WOW.. Thanks mate..
It's gonna very Helpful for me & other ppl.. ??
Sent from my Redmi Note 3 using Tapatalk
didn't work..
showing error as no diag even after typing those commands
kindly help me
nuk.nama said:
showing error as no diag even after typing those commands
kindly help me
Click to expand...
Click to collapse
At what part, the imei change or flashing.
The simplest, and the fastest guide to restoring EFS and IMEI! I haven't backed up my EFS and this revived my phone! Much apprecieated!
Broski32 said:
The simplest, and the fastest guide to restoring EFS and IMEI! I haven't backed up my EFS and this revived my phone! Much apprecieated!
Click to expand...
Click to collapse
Glad i could help mate. Can you confirm your mac address and bluetooth address, whether it is same or changed.
archit.bajpai.ab said:
Glad i could help mate. Can you confirm your mac address and bluetooth address, whether it is same or changed.
Click to expand...
Click to collapse
Can't confirm. My EFS partition was so corrupted from trying other tutorials to restore my IMEI that I didn't even bother backing it up because I thought that it could have been changed already (tried writing to NVRAM with QPST). Since I don't have my original mac and bluetooth addresses written down anywhere (I haven't written them down myself and I don't think they are to be found anywhere on the box or on the phone) I think the only way to check it would be to compare my current addresses on the phone to the addresses contained in your EFS backup. Can you extract them so I can check if they match or not?
Broski32 said:
Can't confirm. My EFS partition was so corrupted from trying other tutorials to restore my IMEI that I didn't even bother backing it up because I thought that it could have been changed already (tried writing to NVRAM with QPST). Since I don't have my original mac and bluetooth addresses written down anywhere (I haven't written them down myself and I don't think they are to be found anywhere on the box or on the phone) I think the only way to check it would be to compare my current addresses on the phone to the addresses contained in your EFS backup. Can you extract them so I can check if they match or not?
Click to expand...
Click to collapse
The mac address and bluetooth address in the efs are my own. I only changed the imei so that no one else can copy it, i didnt know anyway to change mac address. Besides the mac address doesnt matter that much, and i dont think that we will ever be on the same wifi network.
If you dont know then i can explain, that the mac address is required to maintain switches and broadcast in the router, so it technically does not matter.
You can change it later with some apps or use it like that if you wish, if i find any way to restore you mac i will post it too. In the mean time just post a snapshot of wifi mac and bluetooth address so that i can compare them with my own.
So, using this way, one can change the IMEI no. also?
mGforCe said:
So, using this way, one can change the IMEI no. also?
Click to expand...
Click to collapse
Yes, just use the imei changer in the rar file to change your imei. But make sure to backup or atleast note down your imei before doing so.
archit.bajpai.ab said:
The mac address and bluetooth address in the efs are my own. I only changed the imei so that no one else can copy it, i didnt know anyway to change mac address. Besides the mac address doesnt matter that much, and i dont think that we will ever be on the same wifi network.
If you dont know then i can explain, that the mac address is required to maintain switches and broadcast in the router, so it technically does not matter.
You can change it later with some apps or use it like that if you wish, if i find any way to restore you mac i will post it too. In the mean time just post a snapshot of wifi mac and bluetooth address so that i can compare them with my own.
Click to expand...
Click to collapse
Current addresses on my phone:
MAC - 00:0a:f5:a9:XX:XX
Bluetooth - 7C:7F:F0:82:XX:XX
Left out some numbers just in case they are mine. For the purpose of checking that will still be enough
Broski32 said:
Current addresses on my phone:
MAC - 00:0a:f5:a9:XX:XX
Bluetooth - 7C:7F:F0:82:XX:XX
Left out some numbers just in case they are mine. For the purpose of checking that will still be enough
Click to expand...
Click to collapse
Yup, they are not mine. Mine start with 64:cc and so on for both mac and bluetooth. They may be software generated or may be your own, technically i am not sure.
Edit: did you use imei changer to change imei no. Or are you using the default values. If you are using the default values, pls post them too. If you change them, then give your review, ie was it hard or easy, did you encointer any problem, stuff like that.
archit.bajpai.ab said:
Yup, they are not mine. Mine start with 64:cc and so on for both mac and bluetooth. They may be software generated or may be your own, technically i am not sure.
Edit: did you use imei changer to change imei no. Or are you using the default values. If you are using the default values, pls post them too. If you change them, then give your review, ie was it hard or easy, did you encointer any problem, stuff like that.
Click to expand...
Click to collapse
After flashing your EFS backup both IMEI values were set to "0". On the default values I don't think the phone would be able to register on any network with the sim inside, but I haven't tried that. Then I flashed my IMEI with the app you provided in the .rar. Set my IMEI same for both slots because I've got only one written down on the box so I think it is set how it should be out of the box. After that I've rebooted to EDL and flashed global developer rom. And it's all working, I'm able to make calls from both sim slots, however didn't try having 2 sims inside.
All in all the process is very easy, definitely the easiest out there. I haven't encountered any problems, however I think others may have a problem with drivers to get "Qualcom HS-USB Android DIAG 901D" working. Mine was working already because I tried this tutorial before. Thank you for this guide, and providing your backup
Broski32 said:
After flashing your EFS backup both IMEI values were set to "0". On the default values I don't think the phone would be able to register on any network with the sim inside, but I haven't tried that. Then I flashed my IMEI with the app you provided in the .rar. Set my IMEI same for both slots because I've got only one written down on the box so I think it is set how it should be out of the box. After that I've rebooted to EDL and flashed global developer rom. And it's all working, I'm able to make calls from both sim slots, however didn't try having 2 sims inside.
All in all the process is very easy, definitely the easiest out there. I haven't encountered any problems, however I think others may have a problem with drivers to get "Qualcom HS-USB Android DIAG 901D" working. Mine was working already because I tried this tutorial before. Thank you for this guide, and providing your backup
Click to expand...
Click to collapse
Enjoy your revived phone buddy.
Thanks buddy!!!!! you saved my phone
pandyajoe said:
Thanks buddy!!!!! you saved my phone
Click to expand...
Click to collapse
It do what i can do buddy...
Guys. I messed up my phone by restoring a nandroid backup from a different one.
I was able to restore my IMEI using some qualcomm tools. My problem now is that fingerprint scanner won't work on any rom, even official.
Any idea what else I have messed Up? I don't think restoring this efs will fix my fingerprint scanner. Is fingerprint scanner info in a different partition?
chr0m said:
Guys. I messed up my phone by restoring a nandroid backup from a different one.
I was able to restore my IMEI using some qualcomm tools. My problem now is that fingerprint scanner won't work on any rom, even official.
Any idea what else I have messed Up? I don't think restoring this efs will fix my fingerprint scanner. Is fingerprint scanner info in a different partition?
Click to expand...
Click to collapse
Have you checked with miui7 stock rom. As far as i know there are three sensor modules for fingerprint, on of them is goodfix which is currently not supported by many roms. If your is goodfix then it will not be supported too. You can flash miui rom to check whether the fingerprint works or not...
If it doesnot work, then try to resotre your nandroid backup agaian. This tym simply untick efs.