I know - now - is too early, but any plans to prepare Android 5.0 for Mi2S?
Bucci said:
I know - now - is too early, but any plans to prepare Android 5.0 for Mi2S?
Click to expand...
Click to collapse
Officially I don't think so.
By the way I guess Cyanogen will support CM12 for our Mi2S, so we shoud have ROMs L based.
I hope the same, the only official is miui (currently v5 - but plan v6 - problem is on 4.1.2)
I hope CM12 or another CM/AOSP roms should be available for Mi2S
i think that L for mi2s is sure. In fact nexus 4,which has the same HW of mi2s, will be updated officially by google.
In my opinion the big challenge is to achieve 3.10 from our 3.4 kernel
only when m11kkaa will work on it **** miui they suck :silly:
http://m.weibo.cn/u/1697247850
If we knew Chinese, we will know that Autumn Ivan prepares a Lollipop AOSP for MI2s
@akiba is already working on it! So it seems we will have Lollipop based system in our Mi2S:
I wanted to share clickable link for it but not allowed, anyway copy it to address bar with prefix www as usual:
gizchina.com/2014/11/06/breaking-xiaomi-mi2-spotted-running-android-5-0-lollipop/
...but I hope M1cha already working also on Lollipop based CM12 for Mi2S.
CM12 work in progress: https://plus.google.com/app/basic/p...ovi&sview=25&cid=5&soc-app=115&soc-platform=1
Lollipop is here
http://en.miui.com/thread-61384-1-1.html
Android 5 is Up! Thanks to IVAN
...Hours after using it.
I cannot achieve rooting this device, with any Superuser or SuperSU flashable ZIP, neither with xbin/su from ALL CHINISE 6.0.5.1 Ivan Unofficial CWM (OMG). It doesn't officialy support TDB (I don't care, i just mention that), it has not GAPPS but ok, there is a package for Lollipop ready on the Web, and it fits to Mi2s ROM space, without Micha's repartitioning (i think the 4.4.x GAPPS was junk in terms of size as i check that Lollipop needs half the size of 4.4.x). Advanced Reboots don't worked, CM buttons for App kill, neither. But it's a very early stage (alpha i think) and it doesn't have bugs, it works, it boots, you can test it, but not for every day ROM, avoid it, wait for CM12, or sth better from OmniROM
PS. BACKUP everything, and of course, have ready to flash back the Micha's CWM 6.0.5.0. because with the Chinese Recovery i am facing psychological issues.
PS2. After these hours of testing, i am back to CM11 Latest Snapshot!
PS3. You should turn off TDB before flashing Lollipop.
PS4. Again, wait for a release!
"if you have flashed CWM 6.0.5.0, you can flash latest CM11, go to settings "about phone" and set checkbox "update recovery" and reboot. CWM will be 6.0.5.1 english"
M1cha,
can you confirm it? Thanks?
graw2 said:
"if you have flashed CWM 6.0.5.0, you can flash latest CM11, go to settings "about phone" and set checkbox "update recovery" and reboot. CWM will be 6.0.5.1 english"
M1cha,
can you confirm it? Thanks?
Click to expand...
Click to collapse
I don't have such option. Am on Mokee. But I also couldn't find any other link to CWM 6.0.5.1. Can somebody provide such a link?
no_means_no said:
I don't have such option. Am on Mokee. But I also couldn't find any other link to CWM 6.0.5.1. Can somebody provide such a link?
Click to expand...
Click to collapse
there is a link to CWM 6.0.5.1 http://en.miui.com/thread-61143-1-1.html
but who has 6.0.5.0 no necessary to change it just be aware to install and setup system1 only
It looks better then I expected, cant wait to use this with Xposed Framework!
Would love it to look more like KitKat though, it just looks more professional.
Why no screencast?
Well, because I thought this was faster and easier... plus you get to see the M2(S) and the M2S has a great screen which still looks great on video.. I was just amazed by the speed of 5.0
Why didn't you screen cast, i know it works?
btw, thanx for the video
Robin>Hood said:
It looks better then I expected, cant wait to use this with Xposed Framework!
Would love it to look more like KitKat though, it just looks more professional.
Why no screencast?
Well, because I thought this was faster and easier... plus you get to see the M2(S) and the M2S has a great screen which still looks great on video.. I was just amazed by the speed of 5.0
Click to expand...
Click to collapse
xposed won't be released for lollipop
bobanbg said:
xposed won't be released for lollipop
Click to expand...
Click to collapse
Source?
The Xposed developer said that's difficult 'cause ART, but he didn't say that he will not release Xposed at all.
bobanbg said:
xposed won't be released for lollipop
Click to expand...
Click to collapse
Lol.... says who? I totally agree with @Fortinho .... Rovo has never said it won't come, it's just a matter of if and when
And otherwise I'll just go with CM12 ^^
Btw... Impressive Antutu score on the M2S:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
no_means_no said:
I don't have such option. Am on Mokee. But I also couldn't find any other link to CWM 6.0.5.1. Can somebody provide such a link?
Click to expand...
Click to collapse
I have tried the solution what I asked here and working perfectly! So easy to change from CWM6.0.5.0 to CWM6.0.5.1 and keep English CWM menu language. I f you just simple flash CWM 6.0.5.1 than it will be Chinese...
Only problem is, I have tried to clean install CM11 NIGHTLY on system2 and it has stacked at boot logo, but I have successfully installed sMIUI onto system 1. What is the reason? (CWM recovery version is 6.0.5.1 )
Thanks for your reply in advance!
Related
temporary discussion thread for slimkat unofficial build
lets keep the official thread clean, check the official thread first for more info on SlimKat
this is not a continuous development thread, again temporary discussion thread for my unofficial builds
i will try to release builds until we have official weekly builds for i9100, then i will close this thread if official weeklies comes
please no discussion of unofficial builds in the official thread, post here instead and if someone ask, point it in this thread
and as usual disclaimer
i am not responsible on your phone blah blah blah...
INSTALLATION
you need to be on 6.0.4.4 and above cwm recovery..
here:
http://mirror21.downloadandroidrom.com/file/GalaxyS2/recovery/CWM-KitKatCompatible-i9100.zip
credits to @zedomax
flash this
then reboot recovery
full wipe!!!
then flash slimkat and gapps
okkkkk that is better... thanks kroz...
Flash aborted
I tried with cwm 6.0.4.5 and i got flash aborted...
uploading to devhost now, seems android file host is not working well at the moment
i even uploaded the beta 1.1 twice yesterday, and this beta 1.4 twice this morning
subscribed
I hope You will reupload not broken update tomorrow
What is the different between 4.4 and this4.4.1?
Sent from my GT-I9100 using XDA Premium 4 mobile app
Sun90 said:
subscribed
Click to expand...
Click to collapse
hehe, thanks,
im being flooded with pm lol, that's why
I have Android 4.1.2 XXLSS with CWM Base version 6.0.3.2.
Can I install 6.0.4.4 with "Install Zip" directly on top of it?
Will I still be able to use my phone before going to SlimKat?
Thanks
bemolx said:
I hope You will reupload not broken update tomorrow
Click to expand...
Click to collapse
im uploading it now on devhost, already midnight here and my internet connection is too slow,
hope it finishes before i go to sleep, haha
alimug said:
What is the different between 4.4 and this4.4.1?
Sent from my GT-I9100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
see changelog of slim in the download link
see here for the changelog of aosp from 4.4 to 4.4.1, (if you had time to read this long changes, haha)
https://funkyandroid.com/aosp-KRT16M-KOT49E.html
Jdor said:
I have Android 4.1.2 XXLSS with CWM Base version 6.0.3.2.
Can I install 6.0.4.4 with "Install Zip" directly on top of it?
Will I still be able to use my phone before going to SlimKat?
Thanks
Click to expand...
Click to collapse
that^ i am not sure, since i never been in sammy rom for a long time so i have no idea for compatibility or special tricks for updating
make a nandroid backup first...
but i think you can use that but DONT boot into system, after flashing that zip, reboot into recovery and proceed to full wipe and rom flash
Thanks kroz for this thread for unofficial slim.
Will flash your rom and will report later. I have checked the 4.4.1 zip with a zip viewer and All is OK. No message that wrong download, can open the archive.
You mean this zip from last night is OK, or a other issue is included and you recommend for a new download?
Nice that's a xpose module gives for theme changing.
Great.....
I9100 Tapatalk 4, Rom1 Pound Rom 4.4 Kitkat
089man said:
Thanks kroz for this thread for unofficial slim.
Will flash your rom and will report later. I have checked the 4.4.1 zip with a zip viewer and All is OK. No message that wrong download, can open the archive.
You mean this zip from last night is OK, or a other issue is included and you recommend for a new download?
Nice that's a xpose module gives for theme changing.
Great.....
I9100 Tapatalk 4, Rom1 Pound Rom 4.4 Kitkat
Click to expand...
Click to collapse
just redownload from devhost, it seems i had a bad upload
I download and let you know
its up on my devhost, im off to bed, hopefully its ok now
http://d-h.st/users/kroz
ive been using that build until now, pretty stable and fast for me,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*i just themed my phone a little bit that's why its pure black in screenshot
Everything is ok. I just run SlimKat 4.4.1 Thanks for fast upload.
janki111 said:
Everything is ok. I just run SlimKat 4.4.1 Thanks for fast upload.
Click to expand...
Click to collapse
you flashed my last upload already from devhost?
kroz said:
you flashed my last upload already from devhost?
Click to expand...
Click to collapse
Yes
janki111 said:
Yes
Click to expand...
Click to collapse
you have a very fast internet, how i wish i had the same,
anyway thanks for confirmation that it works
Sent from my GT-I9100 using Tapatalk
SimpleAOSP now with 2 versions... RRO/Layers (Legacy Builds with OpenDelta!) & CM12 Theme Engine
I can not describe how excited I am! :victory:
But try and see yourself! You will be more than impressed!
Many many thanks @ all
@BaNkS @CallMeAldy @snak3ater @Gnome @sparksco @Cl3Kener
@TheDarkDefender @jarjar124 @benjamin.j.goodwin ....... :highfive:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SimpleAOSP @ g+
All download links are available on g +. Please no direct links to the files!
Banks Gapps or 64bit Gapps ... both worked very well for me!
Or >> Slim Gapps BETA ARM64 (Mini, Normal & Full)
Flashing as always...
Screenshots - TE Version @ g-drive -> https://drive.google.com/folderview?id=0BxBzjtoD04QfekR4VkN5YUl0bE0&usp=sharing
Screenshots - RRO Version @ g-drive -> https://drive.google.com/folderview...dYaHpJUlo1X2lUdEQ2bGpXQjRwWXpRX2M&usp=sharing
Happy Flashing!
Could you please edit your OP to not include direct links to the downloads please?
Just point to the Google Plus page... Thanks
I had asked specifically not to include download links outside of Google Plus.
No Problem! Done
And again thank YOU! Purrs like a kitten! And all the Extra's! Wuuuuza !!!
Video running the Rom: https://www.youtube.com/watch?v=W9guCKjMVbI
MotoFlasher said:
No Problem! Done
And again thank YOU! Purrs like a kitten! And all the Extra's! Wuuuuza !!!
Click to expand...
Click to collapse
No prob. Glad you like it.
I miss gapps from banks. But this is a good news. Is forced encryption on or disabled? Which gapps are recommended here?
Why miss??? :silly:
They exist! Or the 64bit Gapps ... both worked splendidly for me!
MotoFlasher said:
Why miss??? :silly:
They exist! Or the 64bit Gapps ... both worked splendidly for me!
Click to expand...
Click to collapse
I miss the 64bit from him. Thanks anyway.
Is forced encryption on or is it disabled?
Wrong forum.
Request moved to sub forum.
forced encryption is off
This rom is really nice. It could have its own customization menu, add they are under Display menu, but still is fine. I have some problems with gapps, so I am trying the 64bit version.
And RRO/Layers Builds from Aldy ... ? SimpleAOSP ftw !!!
Just a warning people, franco kernel and Fire Ice kernel causes system UI crash, so don't bother with those. Their g+ page says elementalx kernel is compatible, maybe I'll try that later.
Edit: Fire Ice K6 test6+ works
Diaphragma said:
Just a warning people, franco kernel and Fire Ice kernel causes system UI crash, so don't bother with those. Their g+ page says elementalx kernel is compatible, maybe I'll try that later.
Click to expand...
Click to collapse
Wait wait !!
Why don't you tell me
if the UI crashes
USBhost said:
Wait wait !!
Why don't you tell me
if the UI crashes
Click to expand...
Click to collapse
Sorry, I guess I should have reported it to you first hand. I think it's because of layers. Their g+ page might say why most kernels won't work.
Diaphragma said:
Sorry, I guess I should have reported it to you first hand. I think it's because of layers. Their g+ page might say why most kernels won't work.
Click to expand...
Click to collapse
link me the ROM that your using so i can test to see whats going on
USBhost said:
link me the ROM that your using so i can test to see whats going on
Click to expand...
Click to collapse
CallMeAldy's layers build. http://www.hubdroid.com/~CallMeAldy/SimpleAOSP/FLOUNDER/
Found at their g+ community https://plus.google.com/u/0/communities/113769215740955801290
Diaphragma said:
CallMeAldy's layers build. http://www.hubdroid.com/~CallMeAldy/SimpleAOSP/FLOUNDER/
Found at their g+ community https://plus.google.com/u/0/communities/113769215740955801290
Click to expand...
Click to collapse
with version did you use of my kernel?
because im geting no FC
but does layers even work?
USBhost said:
with version did you use of my kernel?
because im geting no FC
but does layers even work?
Click to expand...
Click to collapse
I used K5. First I flashed franco and got system ui crashes. I went to recovery and flashed k5 and got the same thing. I reflashed the rom and the ui crashes went away. I figured it was the kernels doing that because people were reporting similar behaviors with other kernels on g+
Diaphragma said:
I used K5. First I flashed franco and got system ui crashes. I went to recovery and flashed k5 and got the same thing. I reflashed the rom and the ui crashes went away. I figured it was the kernels doing that because people were reporting similar behaviors with other kernels on g+
Click to expand...
Click to collapse
how does one even use Layers
and try this one
TWRP continued from the work of @KAsp3rd.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instructions:
Marshmallow:
Refer HERE
If you are already running twrp in marshmallow then simply flash any recovery updates using the image install function within twrp.
If you are already updated to the official marshmallow update from T-Mobile then you must wait for a root fix and this cannot be flashed from fastboot commands!!
Lollipop:
Your bootloader must be unlocked prior to attempting installation.
Option 1: Flash using fastboot.
Option 2: Flash in previous installed version of TWRP.
Download:
Marshmallow
md5: 368f665abed83d839feaa14f5d975e7e
Lollipop
md5: b9ab4ac5b57b26c044db0f7be9ce1e5a
Previous versions may be found in the original posting HERE.
Changelog:
3.0.2-0 Marshmallow
05/01/16:
(REVISION) exfat enabled for testing
Device tree has been rebuilt and USB is operational for mtp, adb, and usb-otg.
INITIAL:
Recovery updated to v3.0.2-0
Kernel updated to Marshmallow
Fake epoch disabled in kernel
3.0.1-0 Lollipop
Fake epoch set for my device in the kernel (you will most likely experience incorrect date/time)
DST is now functional
Known issues:
The status bar is displayed in the 2nd screen area. (I have no plans on pursuing screen adjustment)
Time is not saved from Android to Recovery. Fake epoch time has been disabled in the kernel resulting in a year of '1971'. (The only way I've found of fixing this is with a custom fake epoch for each device based on build date. That simply is not going to happen...)
(Re)Sources:
Device tree is available HERE.
Compiled using twrp_omni 6.0 branch available HERE.
Kernel source is available HERE.
Get superSU from @Chainfire HERE.
Please report all issues on my github so I can track them HERE.
Special thanks:
@KAsp3rd @TheJesus @shabbypenguin @Dees_Troy @_that @bigbiff @helicopter88 @savoca @autoprime and anyone I've forgotten.
Reserved...
Just downloaded gonna check it out. Thank you
Thank You...
Thank you sir
Common sense isn't all that common
Thanks
Sent from my LG-VS985 using XDA-Developers mobile app
EDIT: Nevermind.
So far so good. Thanks!
Thank you, thank you
@GROGG88 v3.0.2-0 is out fyi.
Airtioteclint said:
@GROGG88 v3.0.2-0 is out fyi.
Click to expand...
Click to collapse
When sources are updated I will update the build, but you can see here that they remain at 3.0.1:
https://github.com/TeamWin/Team-Win-Recovery-Project/commits/android-6.0
GROGG88 said:
When sources are updated I will update the build, but you can see here that they remain at 3.0.1:
https://github.com/TeamWin/Team-Win-Recovery-Project/commits/android-6.0
Click to expand...
Click to collapse
We will need an update to support the 20e bootloader from the Marshmallow update released today - hope you can help!
siraltus said:
We will need an update to support the 20e bootloader from the Marshmallow update released today - hope you can help!
Click to expand...
Click to collapse
Yes. I am looking for MM compatible TWRP also. Will be great to see as soon as possible.
siraltus said:
We will need an update to support the 20e bootloader from the Marshmallow update released today - hope you can help!
Click to expand...
Click to collapse
sikander3786 said:
Yes. I am looking for MM compatible TWRP also. Will be great to see as soon as possible.
Click to expand...
Click to collapse
I updated to MM today, so I am currently working on it...
GROGG88 said:
I updated to MM today, so I am currently working on it...
Click to expand...
Click to collapse
Thank you VERY MUCH.
GROGG88 said:
I updated to MM today, so I am currently working on it...
Click to expand...
Click to collapse
Thank you!
Maybe with MM we can get the date/time correct in twrp.. (keeping fingers crossed)
NYLimited said:
Thank you!
Maybe with MM we can get the date/time correct in twrp.. (keeping fingers crossed)
Click to expand...
Click to collapse
The time is always correct for me... :laugh:
Seriously, the MM kernel source does not have any changes to fake epoch. Everyone will continue to suffer with 'grogg' time.
MM
GROGG88 said:
I updated to MM today, so I am currently working on it...
Click to expand...
Click to collapse
How is MM treating you on your device? And, thank you for all your work. We all appreciate it.
scloutkst said:
How is MM treating you on your device? And, thank you for all your work. We all appreciate it.
Click to expand...
Click to collapse
Full wipe and running just fine so far.
It seems that we're in the same boat with the tmo g5. Luckily team codefire has made progress. Hopefully we can benefit from it as well.
https://youtu.be/Zlieyd9CP7Q
@autoprime
Aj's Galaxy J2 (SM-J200H) ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Based on the latest J200HXXU0APK1 firmware (November 2016 Security Patch)
Deodexed
Extremely Debloated
100% De-Knox
Zip-aligned
Rooted with SuperSU v2.79 SR3 Systemless
Added Busybox v1.24
Added latest Sqlite (useful for titantium backup)
Added lNIT.D Support
Added SU.D Support
===>[J200H] Aj's Galaxy J2 ROM.zip
1. Follow this GUIDE on how to install TWRP.
2. Download ROM and copy to sd card
3. Reboot into TWRP (by turning off device and pressing power, home, and volume up buttons)
4. Wipe System, data, cache, dalvik cache (DO NOT WIPE SD CARD, or internal storage)
5. Install Rom
6. Reboot and wait 7-10 minutes for first boot. (don't panic, only the first boot takes that long, because the ROM is deodexed.)
BUG FREE, LAG FREE, AND PLENTY OF RAM
Credits: @ASSAYYED|@Chainfire|@sammobile|XDA Community
First xD
~ Reserved
@jonathanmohamed i have tried your rom on j200h today device booted perfectly, need more testing , will let you posted ..
thanks mate for the rom ...
Will try it today and give you feedbacks......
And Do I compulsory must have my baseband J200HXXU0APK1 or it can be flashed on any J200H device??
By the way can you port other roms too for this device??
Tested it.
Nice Rom almost apl thing working.
But for me viper4android couldn't install itw driver stating I have wrong or nroken busybox or root correctly. Can anyone tel me how to fix this
ad. said:
Will try it today and give you feedbacks......
And Do I compulsory must have my baseband J200HXXU0APK1 or it can be flashed on any J200H device??
By the way can you port other roms too for this device??
Click to expand...
Click to collapse
no, it can be flash on any j200h, i just stated that the firmware i used was J200HXXU0APK1.
What other device?
jonathanmohamed said:
no, it can be flash on any j200h, i just stated that the firmware i used was J200HXXU0APK1.
What other device?
Click to expand...
Click to collapse
Thanks for the reply. By the way I have already flashed the rom and it is working nicely.
Other devices meant devices with different baseband version.
screen shots
Can you please post some screenshots for your rom
meshel.gally said:
Can you please post some screenshots for your rom
Click to expand...
Click to collapse
Same as Stock rom. I don't think you need screenshot.
Thanks ..
But can you build any roms to this device like noble or cm
Mhahali said:
Thanks ..
But can you build any roms to this device like noble or cm
Click to expand...
Click to collapse
I don't know if he can or not because I too have qsked same question he didn't replied. Let's enjoy this till we find other ROM
ad. said:
I don't know if he can or not because I too have qsked same question he didn't replied. Let's enjoy this till we find other ROM
Click to expand...
Click to collapse
You tested it ?
What is the difference with stock rom ?
Mhahali said:
You tested it ?
What is the difference with stock rom ?
Click to expand...
Click to collapse
Its allmost same. No notable difference are there. But it is debloated and have more internal memory space and little less ram consumption than stock one.
Awesome and bugs free until now !!
Rom is perfect and there's no bugs for now but we need some thing more important like the system.ui for note or s and separate zip file for changing the traditional lollipop bootlogo
Are you going to do any of them??
mhmhasy said:
Rom is perfect and there's no bugs for now but we need some thing more important like the system.ui for note or s and separate zip file for changing the traditional lollipop bootlogo
Are you going to do any of them??
Click to expand...
Click to collapse
I'm just a noob and I can't do that. That's why I have said we should wait till someone develop other rom.
Can anyone help me to install viper4android in this rom..
Anyone tested it for J2GU? or other variant?
Great
Brooo you are Amazing really it works
Thanks bro wait for ma donation soon
Not work in j200h , please help me
Sent from my SM-J200H using XDA Free mobile app
jehadoo.4 said:
Not work in j200h , please help me
Sent from my SM-J200H using XDA Free mobile app
Click to expand...
Click to collapse
How did you installed?? I'm currently using this rom
Katkiss ROM for the a500lollipop 5.1.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer: Flash this at your own risk I am not responsible if this damages your device.
This is a rom that a ported a while ago. I used Thor's omnirom to port this so it likely has the same bugs. Since tegraowners seems to be down I am posting it here.
What does work:
Wifi
Bluetooth
Gapps
Most other things(I think)
What doesn't work:
May be unstable
You tell me I havnt really tested this that much
Neon Support(more of a hardware problem but just letting you know)
Tips:
This device is old so Lollipop runs a bit slow you might want to overclock it.
Google play will not work right if you do not format your data partition to f2fs. (You can do this in recovery)
Downloads:
ROM: https://www.mediafire.com/download/xaad1oju771etb2
Chromium for tegra 2 devices: https://forum.xda-developers.com/ga...t/app-chromium-m56-optimized-tegra-2-t3550210
OpenGapps: https://opengapps.org/
There is a couple random things like SU and Katkiss Gapps in timduru's original thread: https://forum.xda-developers.com/eee-pad-transformer/development/rom-t2942560
Credits: timduru (He made the original Katkiss rom), thor2002ro(I used his rom to port this rom), turnert( I ported the rom)
ROM os version: 5.1.1
Kernel: 3.8.13.28-digitex-thor-t68 (by thor and digitex)
Sources:
Original ROM I ported from timduru: https://forum.xda-developers.com/eee-pad-transformer/development/rom-t2942560
thor2002ro's rom: https://forum.tegraowners.com/viewtopic.php?p=53370 (its down but im still going to link it anyway)
There isnt really any device specific source code for this rom I used winrar to port it
Screenshots:
Thank you for this..... Just revived two of these, and was looking for something to play around with. Will post updates after playing.
So I can't get it to boot. it gives an error in aroma, attaching log.
Using Skrilax v9 boot and public recovery v0.2 cwm v5.5.04 based.
It reboots into recovery, after trying to boot normal from LNX.
jonrobertd said:
So I can't get it to boot. it gives an error in aroma, attaching log.
Using Skrilax v9 boot and public recovery v0.2 cwm v5.5.04 based.
It reboots into recovery, after trying to boot normal from LNX.
Click to expand...
Click to collapse
You need to use twrp
OK so TWRP installed, 2.6.3.0 is the last one i can find. Is there a newer?
I can't find the option to convert to f2fs, not under wipe/advanced/ there is no other option than to wipe?
And it hangs trying to start aroma...
I feel like a newb...
jonrobertd said:
OK so TWRP installed, 2.6.3.0 is the last one i can find. Is there a newer?
I can't find the option to convert to f2fs, not under wipe/advanced/ there is no other option than to wipe?
And it hangs trying to start aroma...
I feel like a newb...
Click to expand...
Click to collapse
There is one newer version but I don't know if I can get it, it was posted on tegraowners. I will see if I can find it in a couple days when I can access my computer.
Yeah, i remember that site, shame what went down, I can still remember the drama here...
Maybe it will turn up. I will keep digging too.
Thanks for the help.
Hey, I have dug for a newer bios, but no luck. Any chance you found it?
EDIT:
bios... lol.. recovery.
jonrobertd said:
Hey, I have dug for a newer bios, but no luck. Any chance you found it?
EDIT:
bios... lol.. recovery.
Click to expand...
Click to collapse
I might I keep forgetting to check, I'm pretty sure I have it on my tablet. I'll try to remember to check it tonight.
could someone try this i think it might be twrp 2.8.0.0
Edit: it's not twrp
Thanks, will try later tonight, and update with answer soon.
turnert said:
could someone try this i think it might be twrp 2.8.0.0
Click to expand...
Click to collapse
For the reference, its not TWRP 2.8. It doesnt even boot on my A500
Azzlan said:
For the reference, its not TWRP 2.8. It doesnt even boot on my A500
Click to expand...
Click to collapse
Thanks I will see if I can find one that works
Azzlan said:
For the reference, its not TWRP 2.8. It doesnt even boot on my A500
Click to expand...
Click to collapse
I think I may have just found it would you mind testing it when I upload it?
Edit: https://www.mediafire.com/download/e7wpny5f39vw3pc
Play services
Hello Friends, thx for your work. I have an acer a501 , your rom is ok but I can't update google play services and it's a problem because I can't use some stuff like youtube and Netflix.. is there any other gapps that are ok please? Thx.
ichinii said:
Hello Friends, thx for your work. I have an acer a501 , your rom is ok but I can't update google play services and it's a problem because I can't use some stuff like youtube and Netflix.. is there any other gapps that are ok please? Thx.
Click to expand...
Click to collapse
Format your data partition to f2fs, you can do this in recovery.
If Netflix and youtube run slow you can overclock the tablet in settings.
[Acer A501 ] Gapps -rom katkiss
Hello, thank you Friend, now that seem to be ok , have a nice day.
hello everyone, i'm using this fantastic rom with grat results...it revived my acer a500 ... using pico gapps
my ojective is to use this tablet as a media player source for my tv and with this purpose i'm using it with netflix and spotify.
Unfortunately spotify is not working (force close when i try to open it)
can someone help me?
Another question is: can i use chromecast?
thank you so much
Snelfo said:
hello everyone, i'm using this fantastic rom with grat results...it revived my acer a500 ... using pico gapps
my ojective is to use this tablet as a media player source for my tv and with this purpose i'm using it with netflix and spotify.
Unfortunately spotify is not working (force close when i try to open it)
can someone help me?
Another question is: can i use chromecast?
thank you so much
Click to expand...
Click to collapse
You should be able to use Chromecast, and try downloading an older version of Spotify and see if that works.