Does anyone have experience running ethernet to microusb on android devices? i really want the nexus player but no ethernet is an absolute deal killer for me. i dont believe in streaming 1080p video over wifi. i know it only has usb 2.0 but that should support up to 480mb/s theoretically. perhaps using a device like this: http://www.amazon.com/Smays-Etherne...3460191&sr=8-1&keywords=micro+usb+to+ethernet
I agree.
I would love to buy one of these, but my AP is upstairs above my living room and I do not get the best WiFi at my entertainment center. I have a range extender downstairs, but it is at the other end of the house.
My ChromeCast often stutters (or just won't work) on anything more than 480p Video.
But I do have Gigabit Ethernet wired to a switch at my entertainment center.
I use USB Ethernet adapters with Android HDMI sticks all the time. The Android Sticks have either full Size USB, an Ethernet Connection, or I use an OTG cable.
I would think that the OTG cable and USB Ethernet adapter would work with the Nexus Player, unless they specifically took the drivers out. Common or Generic chipset USB Ethernet Drivers seem to be pretty well supported in most Android Firmwares.
---------- Post added at 10:10 AM ---------- Previous post was at 10:02 AM ----------
Sorry to double post, but if you are wondering how a USB Ethernet adapter would be connected to a Nexus Player, you would just need one of these:
http://www.dx.com/p/cy-u2-166-usb-f...-adapter-cable-black-15cm-205901#.VD_RJLYXw3A
A hacked USB Travel Hub can also be used.
thanks, i think i have a spare otg cable laying around somewhere. my only question is does the micro usb on the player get used for power or for plugging in peripheral devices such as the ethernet adapter?
thecrunked said:
thanks, i think i have a spare otg cable laying around somewhere. my only question is does the micro usb on the player get used for power or for plugging in peripheral devices such as the ethernet adapter?
Click to expand...
Click to collapse
I don't have any inside information, but as far as I can see, it is powered through the micro USB. (Just like ChromeCast).
That is why you would need a cable like the one I linked to. Notice that it has a separate micro USB female for Power only.
Note also that there is another post in this forum "What Nexus Player won't Do", and Ethernet is not mentioned as removed in that list, so that may give some hope that it is in there.
The settings menus would also have to know how to allow you to configure the new network interface.
ChromeCast (stock ROM) does not support USB Ethernet, but of course the ChromeCast is a much simpler, no-UI device.
We will just have to wait until they are in peoples hands.
Frankly, I have to say that I am out. There are many good Android Set-top boxes out there that have a full selection of ports, possibly better processors, and are cheaper.
By the time you buy the Nexus Player, a wireless keyboard (which you are going to want), the game controller, USB adapters, and Ethernet dongle, you are going to be in the $200 range, and you are going to have a mess of wires and adapters -- No thanks.
I'll "stick" with my "stick", or upgrade to a newer Chinese Android STB that has a decent processor and all the ports.
Linuxslate said:
I don't have any inside information, but as far as I can see, it is powered through the micro USB. (Just like ChromeCast).
That is why you would need a cable like the one I linked to. Notice that it has a separate micro USB female for Power only.
Note also that there is another post in this forum "What Nexus Player won't Do", and Ethernet is not mentioned as removed in that list, so that may give some hope that it is in there.
The settings menus would also have to know how to allow you to configure the new network interface.
ChromeCast (stock ROM) does not support USB Ethernet, but of course the ChromeCast is a much simpler, no-UI device.
We will just have to wait until they are in peoples hands.
Frankly, I have to say that I am out. There are many good Android Set-top boxes out there that have a full selection of ports, possibly better processors, and are cheaper.
By the time you buy the Nexus Player, a wireless keyboard (which you are going to want), the game controller, USB adapters, and Ethernet dongle, you are going to be in the $200 range, and you are going to have a mess of wires and adapters -- No thanks.
I'll "stick" with my "stick", or upgrade to a newer Chinese Android STB that has a decent processor and all the ports.
Click to expand...
Click to collapse
yah i might just pick up the amazon fire tv. the only thing i am gonna use it for is xbmc/kodi and plex. maybe some youtube, netflix, and light web browsing if that.
Since it is relevant to this thread (at least a bit), I'm going to go ahead and post a link to an article on my website:
http://linuxslate.com/Guide_Android_Stick_TV_Box.html
I am NOT trying to dissuade anybody from buying the Nexus player. If you have good wifi and you don't want the headaches associated with a Chinese media player, the Nexus Player is an excellent choice.
thecrunked said:
thanks, i think i have a spare otg cable laying around somewhere. my only question is does the micro usb on the player get used for power or for plugging in peripheral devices such as the ethernet adapter?
Click to expand...
Click to collapse
The official page says:
18W DC power
HDMI out ([email protected])
Micro-USB 2.0
So that's a separate power jack, and then USB for OTG or firmware updates or whatever.
Note that you don't want to get too new of a dongle, because if this doesn't have the absolute latest Linux kernel it might not support some of the newer gigabit dongles.
thecrunked said:
Does anyone have experience running ethernet to microusb on android devices? i really want the nexus player but no ethernet is an absolute deal killer for me. i dont believe in streaming 1080p video over wifi. i know it only has usb 2.0 but that should support up to 480mb/s theoretically. perhaps using a device like this: http://www.amazon.com/Smays-Etherne...3460191&sr=8-1&keywords=micro+usb+to+ethernet
Click to expand...
Click to collapse
I can stream 1080p @ full Blu-Ray bitrate no problem..the problem is not the technology but likely your implementation. Also USB2 is limited to 256mb/s after overhead is subtracted. Thats far less than 802.11AC can do, I get a 890mb connection with a $15 .AC adapter on one of my PC's.
Linuxslate said:
I agree.
I would love to buy one of these, but my AP is upstairs above my living room and I do not get the best WiFi at my entertainment center. I have a range extender downstairs, but it is at the other end of the house.
My ChromeCast often stutters (or just won't work) on anything more than 480p Video.
But I do have Gigabit Ethernet wired to a switch at my entertainment center.
A hacked USB Travel Hub can also be used.
Click to expand...
Click to collapse
If you have a lan drop and switch at your Entertainment center then your highest performance option is to add a access point to that switch, not to use a USB>Ethernet.
thecrunked said:
yah i might just pick up the amazon fire tv. the only thing i am gonna use it for is xbmc/kodi and plex. maybe some youtube, netflix, and light web browsing if that.
Click to expand...
Click to collapse
I'm thinking about trying out the NexusPlayer to replace our FireTV...the FireTV is pretty great but its buggy and nobody seems to be trying to fix the bugs. Hulu loves to crash and has various other playback problems that we experience more than once a day (simply stops playing, or freezes, sometimes after a commercial the screen just goes black with a network logo[like ABC] but the audio is playing), Netflix also occasionally crashes back to the FireTV homescreen, Plex works ok sometimes but has trouble others, the plus is that it has Wifi+Ethernet+Optical. We previously had a Roku3 which was turtle slow compared to the FireTV. I should add that these bugs are widespread and common to many people, these are not issues limited to me or just a few people.
sluflyer06;
I do nit disagree with anything you are saying, however:
I do not see the point of having a wireless AP right next to ever node on my network.
Doesn't that make the "wireless " part nonsensical?.
2nd, I have Gigabit USB Ethernet adapters that use USB 3.0.
Linuxslate said:
sluflyer06;
I do nit disagree with anything you are saying, however:
I do not see the point of having a wireless AP right next to ever node on my network.
Doesn't that make the "wireless " part nonsensical?.
2nd, I have Gigabit USB Ethernet adapters that use USB 3.0.
Click to expand...
Click to collapse
Well if your wireless is weak in that area, wouldn't a AP there benefit your other devices (laptops, tablets, phones?)? I agree that you don't NEED a acesspoint at every drop but we will always have a signifigant # of devices that cannot be wired these days so if you happen to have a drop in a room or area with weak WiFi it seems like the perfect opportunity to kill 2 birds with 1 stone. Also in regards to your USB3 adapter, it won't do you any good with the NexusPlayer because it only has a USB2.0 port...still not a restriction for video though...265 is way above even the highest bitrate blu-ray.
Quite shocked that:
It's not USB 3.0 OTG
That it doesn't have Ethernet at all, maybe a limitation of the Intel SoC? I know the Snapdragon 805 and friends have USB 3.0 OTG...
I wonder how the Intel SoC will play out. Intel is late to this party...
2bluesc said:
Quite shocked that:
It's not USB 3.0 OTG
That it doesn't have Ethernet at all, maybe a limitation of the Intel SoC? I know the Snapdragon 805 and friends have USB 3.0 OTG...
I wonder how the Intel SoC will play out. Intel is late to this party...
Click to expand...
Click to collapse
The ARK page (Intel's CPU library) shows USB 3.0 (and up to 4GB of RAM, while we're at it). Maybe it's a cost thing? No Ethernet is likely the same story. "If you really need it, get a dongle" they'd might say.
Everything about this box seems like Google is targeting it as a lowest-common-denominator device. Being Nexus, it's still somewhat of a developer device. "Make sure your apps can run on this, and you'll be good everywhere." Actually, that's possibly a big part of why the first Android TV device has an Intel chip. Force developers to start supporting x86, and then the TV manufacturers can put any chip they'd like into their TV.
Plus, this lets Google sell it for cheap, and then if other manufacturers want to come along and put together some Android TV luxury box with HDMI in and a USB 3 hub and 4 GB RAM and an eSATA port, go ahead.
An ethernet to USB adapter that worked
Just thought I would share a solution that worked for me.
I live in an apartment building in Manhattan that has a few hundred units and four other similarly sized buildings all within 100 yards plus a muli-plex movie house in even closer proximity.
I have a top-rated AC router and have run wi-fi analyzers to select the least crowded (and non-overlapping) 2.4 and 5 Ghz channels. 2.4 Ghz is essentially useless for streaming multimedia. Even with the 5 Ghz channel, casting music involves several buffering time-outs each minute.
Knew I had to go the USB to ethernet cable adapter route:
- first, I tried a too good-to-be true low-priced adapter on eBay. When plugged into the NP, an internal red LED light shined brightly through the white housing (almost like a Christmas light), but nothing.
- second, I tried a gigabyte adapter that stated in its product description that it was compatible out-of-the box with the NP. Bought it from directly from the vendor on Amazon. Came in brand new packaging and the adapter (plus included dongle cable, disc and instructions) all top-notch. Everything shouted quality compared to the first adapter ... but it also didn't work for me. I hoped it would and I hope it works for others who buy it. Just couldn't figure out why it wouldn't work for me. I tried what others suggested about unplugging the NP and rebooting the device to the root screen (holding the button on the bottom while powering and going through the menus). Also tried it with a PC. I just don't know what I did or didn't do right or why otherwise it wouldn't work.
- third, I looked at the pictures on the Internet depicting actual working adapters with the NP. Saw it was a SMC adapter. Then in a Reddit, I saw the model number mentioned. It is the: SMC Networks SMC2209USB/ETH 10/100 Mbps USB Ethernet Adapter. Bought it for $25 dollars on Amazon (see: amazon.com/gp/product/B00009967F/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1).
Worked right out of the box! Just plugged it in (it evens comes with its own dongle cable).
One thing I realized from this, what people suggest "should" work with the NP and what IN ACTUAL FACT have been tested personally to work are different. I'm not a paid endorser of any company's products. I hope others share product names and model numbers of other adapters that they know from personal experience to also work out-of-the-box.
And as far as the buffering problems I had -- gone. The NP is actually usable now for multimedia content. I sure hope Google includes an Ethernet port when it comes out with a second generation NP.
dynadock?
Just wondering if anyone had tried something like a toshiba dynadock?
its powered, has multiple usb ports and ethernet! Would be great if it worked as i have access to them!:fingers-crossed:
natedogg118 said:
Just wondering if anyone had tried something like a toshiba dynadock?
its powered, has multiple usb ports and ethernet! Would be great if it worked as i have access to them!:fingers-crossed:
Click to expand...
Click to collapse
Thank you for the brilliant idea. I happen to have a Toshibe Dynadock V2. Plugged it in and ethernet came straight up in the settings. I guess we can add this to the list of devices that work.
Yes, Attaching a OTC cable to USB Ethernet Adapter totally works for me! I can see the connection made in the network settings (ip address and domain connection under "Ethernet").
pliz help
Same issue here.
Nexus Player OTG usb is completely disabled.
No mouse, keyboard, Rii or Flash drive 2.0 or 3.0 ...
Nada, null, running Oreo 8.0
I recently purchased the OTG cable on amazon, the first result/best selling $7... No lights come up on the usbs or any form of power going through. While ADB works fine
I'm desperate so I will root it but how to fix with root?
https://www.amazon.com/gp/product/B00LLUEJFU/
This ethernet/USB thing has worked great on my nexus player. Connected an SSD, put my HD Homerun on the same wired LAN, it's a great little DVR/timeshifting box.
MrCalico said:
Yes, Attaching a OTC cable to USB Ethernet Adapter totally works for me! I can see the connection made in the network settings (ip address and domain connection under "Ethernet").
Click to expand...
Click to collapse
I managed to get it working too
Working fine here too. I have a USB ethernet hub connected by OTG cable.
Use it for wired internet and USB mouse.
Related
Hi guys,
I have seen a similar thread about the wifi problems when the hdmi cable is connected, still.. i guess this issue needs more attention?
The problem is, when connecting the HDMI cable, the wifi connection instantly freezes, no connection or maybe only connection for 10 seconds and off it goes.
I bought a HDMI cable with ethernet function, i believe thats HDMI 1.4
Are there more people out there with this problem, and if not, what cable do you use? 1.3 without ethernet?
I don't have a 1.3 cable laying around to test it out, i tried to block pin 14 and/or pin 19 without results, it's too small to block them.
Some people report the screen being mirrored, but without wifi issues.. i don't have the mirror issue, but i do have the wifi issue
Is there a solution for this, or does the transformer go nuts on the new 1.4 ethernet hdmi cables?
Never seen such a problem, but i do know when plugged in, the connection gets blocked instantly, so i guess it has something to do with the cable in my opinion, but i can't test it with a different cable.
I'm running the latest update btw.
D3StRoY said:
Hi guys,
I have seen a similar thread about the wifi problems when the hdmi cable is connected, still.. i guess this issue needs more attention?
The problem is, when connecting the HDMI cable, the wifi connection instantly freezes, no connection or maybe only connection for 10 seconds and off it goes.
I bought a HDMI cable with ethernet function, i believe thats HDMI 1.4
Are there more people out there with this problem, and if not, what cable do you use? 1.3 without ethernet?
I don't have a 1.3 cable laying around to test it out, i tried to block pin 14 and/or pin 19 without results, it's too small to block them.
Some people report the screen being mirrored, but without wifi issues.. i don't have the mirror issue, but i do have the wifi issue
Is there a solution for this, or does the transformer go nuts on the new 1.4 ethernet hdmi cables?
Never seen such a problem, but i do know when plugged in, the connection gets blocked instantly, so i guess it has something to do with the cable in my opinion, but i can't test it with a different cable.
I'm running the latest update btw.
Click to expand...
Click to collapse
if ive read correctly on other threads the mirroring isnt an issue .... if the output is a resolution that the TF can handle it will mirror - if the TF cant handle the resolution it will simply output through HDMI.
Just got word from asus, they said the tablet does not support hdmi 1.4 cables and up, also the one with ethernet function.
This might be the cause.
I still have to find out if a HDMI 1.3 cable solves the problem.
To be continued...
I'm posting this while using my monitor and an HDMI cable that boasts ehternet.... Amazon basics cable btw.
Also, I think I've read about this sort of issue with... Philips? Panasonic? one of those two brands of tv, can't really remember. I've seen it work both on my LG monitor and Sharp tv.
Sent from my Transformer TF101 using Tapatalk
I now ordered a new cable, a standard one without ethernet.
Also a hdmi to hdmi mini adapter to test it out with a standard hdmi to hdmi cable.
Im using it with my LG tv.
This is a known "issue" stemming from the cable.
General rule, the cheapest HDMI cable out there is the one you want. More expensive ones add "features" that you may not be able to use, or that might conflict with the device. The ethernet built into the cable is the cause of the problem.
dorino1 said:
This is a known "issue" stemming from the cable.
General rule, the cheapest HDMI cable out there is the one you want. More expensive ones add "features" that you may not be able to use, or that might conflict with the device. The ethernet built into the cable is the cause of the problem.
Click to expand...
Click to collapse
Might be known, but I still spent half afternoon on the web using my monitor with the TF and a cable with ethernet.
Sent from my Transformer TF101 using Tapatalk
AlexTheStampede said:
Might be known, but I still spent half afternoon on the web using my monitor with the TF and a cable with ethernet.
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
Exactly,
I have seen more people using a cable with ethernet function, so i want to make sure trying a non-ethernet cable solves my problem.
But still, if this solves my problem, its recommended for most of the transformer owners to just buy a standard cable without taking the risk its not gonna work.
Hope to test it out today
Ok guys, problem solved.
If you want to be sure everything works, use a 1.3 (1) HDMI cable, it solved my problem.
So it may be that not all 1.4 + Ethernet cables give the issue as I stated above, but if you want to be sure, a cheap cable without the Ethernet function works 100%.
So ASUS was right about that point in my case.
I hope that this information comes in handy if you want to use the HDMI port in the future.
Cheers!
Found a gigabit connection that works with FireTV. "iClever 3 Ports USB 3.0 Hub with RJ45 10/100/1000 Gigabit Ethernet Converter LAN Wired Network Adapter for Laptops, Ultrabooks and Tablet PCs with USB Ports, Compatible with Windows XP/7/8, Mac OS-X, Linux Chromebook Anroid 4.0 and above" Here: https://www.amazon.com/gp/product/B00KRTVOUE/
While I've enjoyed the FireTV, I've found that some of the programs I use on it are choked by the 100 megabit port (such as the HD Homerun View app), and I'd tried a couple of other USB LAN connectors without success. It seems the Android software doesn't have built in support for many USB gigabit products. This one was on sale (with a coupon) and I figured even if it didn't work, I'd still have 3 USB 3.0 ports, but lo and behold, the Fire recognizes not only the USB but the gigabit port, which helps with the throughput from other parts of my network, including the HD Homerun View app. On the app, HD channels are actually watchable, including DRM channels in HD.
I searched the forums, and saw others looking for the same, so figured I'd report my findings.
the plugable USB2.0 -> "gigabit" ethernet adapters i used on my Gen1 ATV work fine with the firetv as well.
Note that fireTV is usb2.0 only, so your network is limited to ~400 megabits due to the USB Bus speed but it will negotiate at 1000mbps.
mattvirus said:
the plugable USB2.0 -> "gigabit" ethernet adapters i used on my Gen1 ATV work fine with the firetv as well.
Note that fireTV is usb2.0 only, so your network is limited to ~400 megabits due to the USB Bus speed but it will negotiate at 1000mbps.
Click to expand...
Click to collapse
I'd tried a couple of the Pluggables without success. Maybe it was the firmware updates and my timing. And right about the limitations of throughput; maybe my experience is more perception than reality, but for the price ($13 with coupon) the improvement coupled with the additional USB ports make it worthwhile.
Can you post the model/part numbers of the Pluggables you've had success with in the event others are looking to attempt the same thing?
this topic has been discussed numerous times already, FireTv has USB 2.0 and not USB 3.0 so those gigabit adapters will work, just not yeild gigabit speeds.
Check out my Thread
http://forum.xda-developers.com/nexus-player/general/firetv-vs-nexus-player-vs-ouya-vs-mojo-t2945627
Where i compare the ethernet speeds between FireTV with Fastethernet port (4.18MB/s over SFTP) vs Open Hour Chameleon with Gigabit Port(7.13MB/s over SFTP)
Wait for the Forge TV or the Nvidia Shield for gigabit speeds.
Yeah, I was looking for specific models that worked specifically with AFTV. I didn't see much along those lines, more anecdotal reports of speed and whatnot. Mods can delete this if it seems duplicative, that's fine.
user17600 said:
Can you post the model/part numbers of the Pluggables you've had success with in the event others are looking to attempt the same thing?
Click to expand...
Click to collapse
http://plugable.com/products/usb2-e1000
I used that adapter on my Gen1 ATV's and it's what I've used on the firetv's as well.
mattvirus said:
the plugable USB2.0 -> "gigabit" ethernet adapters i used on my Gen1 ATV work fine with the firetv as well.
Note that fireTV is usb2.0 only, so your network is limited to ~400 megabits due to the USB Bus speed but it will negotiate at 1000mbps.
Click to expand...
Click to collapse
How did you get this to work with your AFTV? I plugged it into the USB port and It was not recognized.
user17600 said:
I'd tried a couple of the Pluggables without success. Maybe it was the firmware updates and my timing. And right about the limitations of throughput; maybe my experience is more perception than reality, but for the price ($13 with coupon) the improvement coupled with the additional USB ports make it worthwhile.
Can you post the model/part numbers of the Pluggables you've had success with in the event others are looking to attempt the same thing?
Click to expand...
Click to collapse
It is "Plugable" and you need an OTG adapter to use the non-OTG version:
"Since the UGREEN adapter doesn’t have OTG capabilities (which is a good thing), you’re going to need to use an OTG adapter to connect it to the Fire TV or Fire TV Stick. Either this Generic OTG Adapter or this Angle OTG Adapter will work. The generic OTG adapter gives you a bit more cable length and flexibility with positioning, but the angle OTG adapter gives you a cleaner setup with fewer cables. I’ve verified that both work with the Fire TV 3 and Fire TV Stick 2, so the choice is yours" change to according to UGREEN info at AFTVNEWS.
Essentially you are adding a USB port, plus a power port to the small port on the AFTV. You still need to get a few extra USB ports in your adapter or settle for one with just Ethernet, however UGREEN and plugable sell versions that are not Gigabit and won't get 480mbps out of the 2.0, or will sacrifice the speed sharing it with the other peripherals according to some reviews.
---------- Post added at 08:33 PM ---------- Previous post was at 08:15 PM ----------
ddivita said:
How did you get this to work with your AFTV? I plugged it into the USB port and It was not recognized.
Click to expand...
Click to collapse
You need an OTG "On The Go" adapter, it was an android/Linux idea that allowed plugging regular USB keyboards and devices into micro USB on a phone or tablet. You get that adapter then you plug your 10/100 Mbps or 1000 (limited to 480 on 2.0) Mbps devices. Examples are FunHome or Fun-Home left angle OTG adapter or DSYJ micro USB adapter on Amazon.
Some other cables don't have a power connector though so you might not want one without both a micro-USB and USB input.
I gather the Zenfone 2 has MHL capability - high definition video and audio (up to 7 channels) output to HDMI via a USB MHL cable/adapter. Has anyone tried connecting to a TV by this method?
kanagawaben said:
I gather the Zenfone 2 has MHL capability - high definition video and audio (up to 7 channels) output to HDMI via a USB MHL cable/adapter. Has anyone tried connecting to a TV by this method?
Click to expand...
Click to collapse
GSMArena says that it did have MHL, but everyone who has tried had not gotten it to work, so I'd say it doesn't have it.
Sent from my ASUS_Z00AD
Good job I didn't buy an HML adapter I saw yesterday then
I tried to compile in Moorefield's HDMI into my kernel for fun the other day; not so great.
Phone booted up, but said that there was an hdmi connection ( without connecting anything ) and started overheating fast.
I'm guessing that there might be an hdmi connection on the board somewhere that connects to the microUSB bus, but it's soldered/jumpered over.
ycavan said:
I tried to compile in Moorefield's HDMI into my kernel for fun the other day; not so great.
Phone booted up, but said that there was an hdmi connection ( without connecting anything ) and started overheating fast.
I'm guessing that there might be an hdmi connection on the board somewhere that connects to the microUSB bus, but it's soldered/jumpered over.
Click to expand...
Click to collapse
I think, it's full-featured HDMI connector reserved on SoC (in case if used in Android TV dongle), not MHL.
There is Intel WiDi wifi display service integrated in the Rom. How can we use that for wireless display to a pc or android/smart tv?
Mhl didn't work, tested and asked in zentalk, online chat support and in xda..
But i seen an apk with name hdmi don't know what it is for
I thought it can make sense to list here alternative options to use the continuum feature. Here is what I use:
- Aukey USB-C to HDMI adapter
- Supremery BT Keyboard within Touchpad
Good to see alternatives are working fine
Monoprice USB-C to HDMI adapter: works for video, but flaky connection. I also don't get any audio output.
Aukey USB-C to VGA adapter: the phone recognizes a USB device is connected, but doesn't work.
Microsoft Display Dock: Works well without issue of course. However, a few comments - it doesn't work without a power connection. It also doesn't like the Google dual-port USB-C charger and refuses to power up from that (despite the Google charger being capable of 5V / 3A just like the Microsoft one).
Works without issues with Apple USB-C Digital AV Multiport Adapter for Macbook 12 Retina. And does not need necessarily current.
Continuum works great with the "Microsoft Wireless Display Adapter" too, sound and vision go to the TV/Monitor and phone turns into Trackpad. Just like using the dock but less hassle and wires.
I also tried my Roku3, it works but can be a little flaky
It dosn't work with XCSOURCE USB-C 56k ohm to HDMI /USB 3.1 Multiport Adapter for MacBook LT11
http://www.ebay.co.uk/itm/311536382296
USB port works great...flash drive and keyboard works smooth...BUT HDMI dosn't work at all
Everytime when HDMI cable is inserted phone throw an error with dosn't recognized USB...
Hello,
I also bought the Aukey -C USB to HDMI adapter.
But on 2 Samsung tv , I have problems of disconnection and resolution.
If anyone can help me ....
Thank you in advance
i bought vtin vs1-vvc9h from amazon. Video works.. But i could not make audio to work.
I also bought vicTsing mx-vs1-PCL005B from amazon too. And video worked but audio did not.
I know audio works on ms hd500 with same monitor and cables
The Microsoft wireless Display adaptor v2 works well in continuum mode unless you use 5GHz wifi, in which case it is extremely poor, sound and display stutters like there is no tomorrow.
My Surface pro 2 (normal extended display) has the same issues connecting to it with 5GHz wifi used.
So in short, connect to your internet with a 2.4GHz wifi AP if you intend to use The Microsoft wireless Display adaptor.
I'm quite tempted to get the dock now as one of my office PCs is about to have a catastrophic HHD fail and continuum will kill several birds with a single stone.
https://www.amazon.fr/dp/B01BWMQ5GC
Some people on reddit used this and it worked. Can someone confirm?
I have a LG 42LA660s Smart TV, with Miracast enabled. I just connected my phone to a wireless display, and the Continuum works. It is not flawless but I am satisfied with it.
xheretic said:
It dosn't work with XCSOURCE USB-C 56k ohm to HDMI /USB 3.1 Multiport Adapter for MacBook LT11
http://www.ebay.co.uk/itm/311536382296
USB port works great...flash drive and keyboard works smooth...BUT HDMI dosn't work at all
Everytime when HDMI cable is inserted phone throw an error with dosn't recognized USB...
Click to expand...
Click to collapse
Cuz its MAC. ----> mac products are sucks xd
olarf said:
I thought it can make sense to list here alternative options to use the continuum feature. Here is what I use:
- Aukey USB-C to HDMI adapter
- Supremery BT Keyboard within Touchpad
Click to expand...
Click to collapse
With the coming of the new Macbook with USB-C, there are now quite a few new and cost effective alternatives on the market. I recently bought an unbranded dongle/dock thing which is advertised as to be used with the new Macbooks. It has a USB-C connector on one end, with a USB-A port, HDMI-out port, and USB-C charging port on the other. Works really well, got it for about 1100 INR / 17.50 USD
My display dock HD 500 with a lumia 950 does only view 720p on my full HD TV. Is there any chance to force 1080p output?
I'm gonna check this tomorrow on work where mine Lumia950 and HD500 are and a Dell 24" FHD screen.
Works fine with my Surface Go tablet and LG FHD 55" television. Surface Go with USB-C kabel and LG-tv with HDMI.
And also my Lumia950 works with it on my LG-tv or at work on HP 24".
I've tried a couple of devices that claim to connect V20 to tv by wired usb c to HDMI connector. They work for a while then the picture is lost or the phone itself freezes up. About the longest play I've gotten successfully is an hour but usually something goes wrong within 15 minutes.*
The phone has been out over 6 months now so I thought someone may have found a really dependable HDMI connector? I don't mind the lack of power in because I can always change batteries but phone should be able to play through HDMI long enough to watch one movie. That's all I really need hut I don't want to have to screw around with it 10 times to watch one movie.
Thanks so much for your help!
I've been wanting to make use of this feature, but haven't extensively yet. I have though gotten to make fair use of a micro-USB to HDMI adapter. A few trouble spots come to mind here.
Sounds like you're powering the adapter/phone from an external power source? How good is that power source? My micro-USB to HDMI was distinctly less reliable when plugged in since I was merely powering it from a normal USB port. Try running it entirely from the phone's battery. If this works better then it could be you really need a higher power source when using the adapter.
How good is your HDMI cable? Depending on how strongly the phone/adapter drives the HDMI signal, a lower quality cable could break the camel's back.
I've been running into a different bit of trouble with USB-C to HDMI adapters. I've found several of these, but whenever they've got a USB-C pass-through, the pass-through is strictly for power and does not carry the USB signals. The MyDP specification allows for USB3 to be passed through if 1 or 2 pairs are used for the HDMI signal, but allows for USB2 to be passed through no matter how many pairs are used for the HDMI signal. There are adapters which also include USB-A port(s), yet none which include an external USB-C with the USB signals. Grr!
I use C to HDMI not micro usb. V20 doesn't use micro usb. It uses slimport. I have one adapter which allows simultaneous charging and one strictly slimport C to HDMI. Both behave the same way. I have a high quality 2.5 foot HDMI wire.
Power source was Samsung tv usb powered output 1 amp. Point is I have the same issue with pure slimport and no charging.
The one that allows simultaneous charging does in fact charge and work but always craps out but so does the slimport C to HDMI.
Hmm, entertaining what you find when you do research. I suspect the V20 is using the "MyDP" specification, which is the official specification name behind "Slimport". Seems there are at least two other video out methods for USB-C.
I haven't done enough with the video-out feature of my V20 to have much experience yet. With a V10 whenever an adapter was plugged in without external power there were no problems, but when an adapter with external power was plugged in video wasn't reliable.
I'm interested in reading if you find out anything.
Slim Port USB-C to HDMI Adapter for Samsung I got this one from amazon it works will for screen sharing to the head unit in my SUV
https://www.amazon.com/gp/product/B01M733OQA/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
frome901 said:
Slim Port USB-C to HDMI Adapter for Samsung I got this one from amazon it works will for screen sharing to the head unit in my SUV
https://www.amazon.com/gp/product/B01M733OQA/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Can you watch an entire movie from Netflix without jamming or losing hdmi connection?
recDNA said:
Can you watch an entire movie from Netflix without jamming or losing hdmi connection?
Click to expand...
Click to collapse
Sorry I haven't tried, but its seems to connect smoother the a wifi dongle.
does anyone know if there's a compatible dongle for the V20 with not only hdmi but also power input and usb host?
Happening to me too - Any suggestions
Your situation's description fits my problem exactly. I have a USB C to HDMI that was vouched as working by several V20 owners. I plug it into my Dell monitor to play games on a bigger screen. It works well for a while, then disconnects and popup on my screen says something like, "LG Bridge has stopped working do you want to exit?". Once this happens, it's almost impossible to get the V20 to share the screen again. It's not a hub, just a USB C (male) to HDMI (female).