Okay so I am really stuck here... hopefully someone can help me
Connecting my S5 with Samsung Stock ROM to my Laptop (Windows 8.1) via USB 3.0 cable gave me three options:
USB-Connection (PC):
connect as
MTP
PTP
MTP (USB 3.0)
Now I have tried AOKP ROM and also CM11 ROM for my S5, but as problemless as USB 3.0 support worked while on STOCK ROM..... as confused I am now....
Connecting my S5 running AOKP/AOSP ROM with USB 3.0 cable to my Laptop now only gives me these two options:
MTP
PTP
When copying files with AOKP/AOSP ROM running its obviously NOT USB 3.0 speed. I am quite sure my Laptop has the required drivers installed, as USB 3.0 support worked just fine with the Samsung Stock ROM.
I thought this must be a well known problem/issue. But so far, I looked hours on Google and no answer found.
I also posted in the Cyanogemod Forum - Galaxy S5 Support Section --> no reply
I am really really stuck. I feel like there must be an easy solution, but I just don't get it..
So really would appreciate any help you can offer!
Thanks!
Related
Hey guys, just got my Tab a few days ago, its unlocked and its working great. I want to root, but my PC wont recognize it (running win7) and it says the USB device has malfunctioned... wth? I searched through some threads about the drivers, and ive tried 4 different ones, restarted my PC, AND my Tab, with no luck. No, USB Debugging is not enabled. (not a noob, just, simply not working)
Any ideas? I would appreciate it
I just got my tab 3hours ago. I got it to work.
Here are what i've done
1.go to control panel and see if samsung usb driver is there. If it is, uninstall it.
2.disable usb debugging on the tab
3.connect the tab to the computer.
Thats wht worked for me. Hope it helps. And yes, samsung has really got to work on the usb thing.
Unzip and run the attached file. Delete any old unused USB device and delete any Android, Samsung or other related device then reinstall Samsung drivers.
NovaFox238 said:
Hey guys, just got my Tab a few days ago, its unlocked and its working great. I want to root, but my PC wont recognize it (running win7) and it says the USB device has malfunctioned... wth? I searched through some threads about the drivers, and ive tried 4 different ones, restarted my PC, AND my Tab, with no luck. No, USB Debugging is not enabled. (not a noob, just, simply not working)
Any ideas? I would appreciate it
Click to expand...
Click to collapse
This helped me: my computer tower has front and back USB ports. Back USB ports are directly embedded in the motherboard, front USB ports are a wire run from the case plugged into the motherboard, but the front USB ports are on a different chip.
When I first tried using the ADB debugger with Android, ADB would not even find my device if I plugged the device into the front USB ports. If I move the cord to the back USB ports, everything works properly. Maybe this is your issue?
Thanks guys, I believe I got it working.
The probem:
USB Mass Storage not working in Recovery. I tried everything, reflashing different recovery but its not working, it doesn't give an error message. When card is not inside however it does complain. SdCard is fine because I can flash zips that are on it. Tested on both windows and ubuntu. tried another card as well
USB Mount doesn't work in CM7.2 or any rom or nand restore i've done recently. I had Insomnia at some point, then inferno, then cm 7.1, none of these restores work. Again here no errors, I do not even see the sign for usb detection. usb debugging is enabled/disabled no difference. phone however still charges though.
I'm on a trip right now, but I've not had the chance yet to get another usb cable but the two I have dont work.
katsumeiyo said:
The probem:
USB Mass Storage not working in Recovery. I tried everything, reflashing different recovery but its not working, it doesn't give an error message. When card is not inside however it does complain. SdCard is fine because I can flash zips that are on it. Tested on both windows and ubuntu. tried another card as well
USB Mount doesn't work in CM7.2 or any rom or nand restore i've done recently. I had Insomnia at some point, then inferno, then cm 7.1, none of these restores work. Again here no errors, I do not even see the sign for usb detection. usb debugging is enabled/disabled no difference. phone however still charges though.
I'm on a trip right now, but I've not had the chance yet to get another usb cable but the two I have dont work.
Click to expand...
Click to collapse
Its either your USB cable or your phone USB jack mine does the same thing I have to wiggle it to get a good connection cuz my USB cable sucks cuz with others it recognizes it right away.
...Awesome... said:
Its either your USB cable or your phone USB jack mine does the same thing I have to wiggle it to get a good connection cuz my USB cable sucks cuz with others it recognizes it right away.
Click to expand...
Click to collapse
He has tried two cables, so I would tend to lean toward the port.
Sent from my HTC Glacier using XDA
i am in the same boat. looks like my charging port is bad. anyway to replace the charging port? i am not good with soldering
it's not ur usb port
it's htc.. htc devices doesn't support usb host feature.
If you have a rom and kernal that do support usb host then try powering the usb as the htc devices do not provide power out.. use usb Y cable
tempuser2005 said:
it's htc.. htc devices doesn't support usb host feature.
If you have a rom and kernal that do support usb host then try powering the usb as the htc devices do not provide power out.. use usb Y cable
Click to expand...
Click to collapse
What? He isn't trying to host the connection. He is trying to use his phone as a USB mass storage device.
Where did you get USB host from in his questions?
Sent from my HTC Glacier using XDA
Hi all,
I am having the same problem, except perhaps with a different cause. My user account on Windows 7 became corrupt and I can no longer log in, so I had to create a new one.
On the new account, my myTouch 4G is not recognized for mass storage/disk drive mode via USB. The USB cable does work, the port is okay, and I've used both with other devices. The myTouch shows as charging when connected to the computer. I have uninstalled and reinstalled all of the myTouch drivers, restarted computer and phone, to no avail.
When it is connected in USB, it shows as generic "Drive F" and is inaccessible. When I check properties it says mytouch4g. When I check "Devices" it is recognized as portable storage. I have tried with USB debugging on and off, and have set "connected to computer" mode to disk drive.
Any thoughts? I thought possibly loading the generic ADB driver again might help, but I cannot get to the stage where I can force it to load that driver instead of the HTC one.
My nexus 10 is only being charged when I connect it to my computer on usb 3.0 port, the computer doesn't recognise it as a storage so I cannot transfer files. My galaxy s3 is working fine with usb 3.0
They are both working fine on usb 2. Is that normal?
not normal, my Sony laptop with USB 3 port see Nexus just fine. Running all stock on Nexus. Weird.
I'm also on Stock rom, but the bootloader is unlocked and rooted.
Did you ever find a fix for this? I'm having the exact same issue after rooting...Tabelt and recovery work great only my computer is not picking it up as storage...
Not "normal", but quite common. It's not the Nexus 10s fault, USB 3.0 is very buggy depending on the chipset.
Since the day i bought my note 3 i have been having problem with usb 3.0 connection. Whenever i connect it and click on usb 3.0 i get this error saying "unable to connect devices via usb 3.0" (See photo attached).And also in my pc , note 3 doesnt works with usb 2.0. Please help me out to solve this problem.
Things I Did to tackle this problem :
1. Used another USB 3.0 cable other than the original samsung.
2. Used another USB 2.0 Cable.
3. Used the second USB 3.0 port on my mother board.
4. Used all the USB 2.0 Ports on my mother board.
5. Removed USB Drivers and installed again.
6. Uninstalled USB 3.0 Drivers from device manager
7. Updated from Windows 8 to 8.1
8, Formatted my C Drive.
I Did all the things that i have mentioned but still no use. Plz Help me fix this ****. !! -_-
I have the same issue. Have you found a fix yet? Just got a new laptop. never had usb 3.0 before. But every time I click usb 3.0 on my phone I get the message that I cant connect to other devices via usb 3.0.
Installed the Samsung drivers? Updated your BIOS? Do other USB3 devices work?
Sent from my SM-N9005 using Tapatalk 2
ShadowLea said:
Installed the Samsung drivers? Updated your BIOS? Do other USB3 devices work?
Sent from my SM-N9005 using Tapatalk 2
Click to expand...
Click to collapse
Yes drivers are installed. Tried kies and nothing. Then I tried reinstalling drivers and still nothing. Mtp works fine. But any time I touch the usb 3.0 option on my phone it disconnects and switches back to mtp. I get a notice saying unable to connect devices via usb 3.0. I dont have any other usb 3.0 devices to test with.
ShadowLea said:
Installed the Samsung drivers? Updated your BIOS? Do other USB3 devices work?
Sent from my SM-N9005 using Tapatalk 2
Click to expand...
Click to collapse
Samsung Drivers are installed with proper CDC . Never tried updating BIOS . Other USB 3.0 devices like My WD HDD works just fine. I just now installed Win 7 64x Professional . Same problem . Also i tried to format the same Win 8.1 i had before. No solution yet.
Note 3 connect to pc only as mtp.
Hi folks I have a rooted N7 and have used plenty of different ROMs in the last 2 years. Since installing KK 4.4.4 I cannot connect to my computer by USB, neither Windows 8 or Linux.
OTG is working as I can access external USB cards, there is nothing wrong with the USB leads, needless to say I have tried different leads in different USB ports, the tablet still charges when connected by a USB cable.
In settings, storage has MTP activated, I have tried PTP and it still will not work.
In developer I have activated USB / Android debugging.
I am using multirom and have done so since it came out
My main rom is MAHDI 2.7
Secondaries areCM11 20140903 and pac_grouper-1-20140903
Any help would be appreciated.
Think it's solved
All my other Android devices connect with my computers by usb so I have to conclude that there is something wrong with the N& OTG port.