I bought my Samsung Nexus S from a Koodo booth here in Canada two days ago and have been enjoying it quite a lot since. I've also been reading up on the wealth of information pertaining to rooting it and trying to sort out so many different factors. I notice I'll have to use the search feature to find one little triviality that comes along and the fix it.
Then I decided to just make my own thread where I'll post every step of the ways I find and how I figure out how to solve my issues involved with rooting my phone.
To start, I found out you can create a backup with NANdroid.
I couldn't find any information on where to download this elusive "NANdroid" and then heard from This thread that all I have to do is
kenvan19 said:
Now lets get started. First, how does one install mods on Android? Lets do a NANDroid backup to begin:
1) Turn your phone off.
2) While holding the Volume Up button press the power button until the screen turns on and you will see a black screen with an Android on it and a lot of numbers and words that will mean nothing to you. This is called the Bootloader. In both the bootloader and the recovery mod you will use the volume buttons to navigate between options and the power button to select one.
3) Navigate down to Recovery option and select it.
4) Navigate down to backup and restore
5) Navigate down to backup and select it and let it run.
Click to expand...
Click to collapse
This didn't seem to be the case when I followed these steps; coming first to the predicted screen,
(containing this information)
Code:
FASTBOOT MODE
HW VERSION - REV 16
BOOTLOADER VERSION - I9020XXKA3
BASEBAND VERSION - I9020UCKB2
CARRIER INFO - ATT (but im with Koodo?)
SERIAL NUMBER - Lots of digits.
LOCK STATE - LOCKED
Also giving me the option to select between
Reboot Bootloader
Reboot
Recovery
Power Off
When going into recovery mode I'm greeted with an animation of a box with an arrow coming out of it. This turns into a triangle with a exclamation in the middle of it.
From here I press power and volume up to come to a menu that is supposed to have a NANdroid option I've been told.
Instead; I get the options:
Reboot system now
Apply update from /sdcard
wipe data/factory reset
wipe cache partition
At this point I'm currently stumped, though I'll continue searching as I'd rather not be stuck without a backup before starting the rooting process.
UPDATE: Even though I'm weary of proceeding without backing up, I'm sure I'll be able to restore my phone back to factory somehow.
I spent the night downloading and installing the Android SDK, then started configuring my device for use on windows 7.
Currently I'm in the bootloader interface after installing my phone's device drivers while being in fastboot mode.
The drivers take a couple of minutes, but they install successfully!
On I go, I'll just point DOS to the directory I want it to. Now I'll run the program through dos. What's this?! AND ERROR!?
Psht, I WOULD be missing the "AdbWinApi.dll" Not a hard thing to fix. I'll just google for the file!
Oh! I don't even have to download the file, the directory has just changed!
That was an easy problem to solve with many solutions provided!
Time to try again!
Sweet, it works. WHOA! TEXT ON MY ANDROID WHAT ARE YOU DOING!
And I select Yes to come to a nice screen that says my phone is now unlocked!
Now I need to download an image file? Okay. I can do this.
Okay, flash recovery the flashboot. Looks like the image has updated since the thread's instructions. Hopefully it's still compatible.
Now I just need to root. Just need to install a nice zip file.
AAAND, I can't seem to push it onto my phone for some reason. Time to search.
Oh, I can just copy and paste this file by enabling USB storage and dragging it over.
I'll just follow the rest of the steps, to no errors! Whoo! I'm free to install any ROM I want!
You'll need a custom recovery for nandroid, but first you will need to root. There's guides in the nexus s general section on doing that.
I kind of like this post.
Sent from my Nexus S using XDA Premium App
apreichner said:
You'll need a custom recovery for nandroid, but first you will need to root. There's guides in the nexus s general section on doing that.
I kind of like this post.
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
I just read through Kursk's guide for rooting the i9020a and i9023 and noticed I have no ability to backup my android in the case something goes wrong.
Am I missing something, or do I have to root before having the privilege of backing up my phone's current ROM.
edit: Got sidetracked by a thread in the Chef's forum and learned that Java is the language for App development for Androids. Been reading about the Android OS and how it works for the past couple of hours. Brains bursting. xd
http://forum.xda-developers.com/showthread.php?t=895545
^ Has pretty much all you need to know for installing a custom recovery and rooting your phone.
It's only once you've installed ClockWorkRecovery Mod that you'll be able to easily make backups.
Having recently purchased a TF300T with intent to customize the hell out of it, I ran into a big problem. There wasn't one definitive guide for my general case, some of the steps I read weren't completely clear, and I often had to put pieces together from multiple guides to get where I wanted. Halfway through the process it occurred to me that sharing my experience in form of a guide could give the community something I wish that I had when I began. So enough with the intro, let's visualize the process before we begin.
This guide is for new owners of TF300T devices that have Jelly Bean 4.1.X preflashed from the factory.
joelalmeidaptg said:
If your tablet has 4.2.1 Android version from Asus, DO NOT FLASH A RECOVERY THAT WAS ACTUALLY MADE FOR 4.1 TABLETS! You will end up on a PERMANENT BRICK with no solution until now. You won't be able to use fastboot ever again. You won't be able to flash anything ever again. You will be stuck with a bricked tablet!
If you are looking for a Recovery for a 4.2.1 bootloader (and a complete guide for updating), read this thread: http://forum.xda-developers.com/showthread.php?t=2187982 Don't do it with any other tutorial: they are for 4.1 bootloaders!
Click to expand...
Click to collapse
For those curious...
My TF300T was one of the Champagne Gold models purchased from Groupon with a serial that begins with C9. I recall seeing a user with a Champagne Gold from Amazon that still had ICS. If you're still on ICS, this guide isn't for you-- Read up on NVflash and decide if you want to take advantage of it BEFORE you upgrade to JB.
Here's an overview of what we will be doing:
Click to expand...
Click to collapse
Unlock the TF300T
Backup apps, app data and files (Recommended, Optional)
Install ClockworkMod Recovery (soon to be replaced with TWRP; I gave in)
Root the TF300T (Optional)
Backup your stock Asus ROM (Recommended, Optional)
Flash a Custom ROM
Backup your working Custom ROM (Optional)
Additional information you should know:
Click to expand...
Click to collapse
This guide has been made with the total android noob in mind. Having only owned an android tablet for a week, I too am an android noob. On the flipside, I'm no noob to hardware and software exploits and modifications. I've tried to make this friendly for any type of noob, but there are a few instances where I expect basic menu and Windows 7 navigation skills.
ClockworkMod Recovery doesn't appear to have a "Shutdown" function, nor does it display current battery level-- for this reason, the recommendation and warning to have a battery charged to at least 60% is extremely heavy. The worst thing that can happen to any device is usually an incomplete flash. Don't let it happen to you-- start charging your TF300T NOW.
I have seen reports that "Fastboot" doesn't work properly on Windows 7 64-bit. This guide addresses that issue, as I also encountered it. If you don't know what "Fastboot" is, in the words of an admirable comedian, "You gonna learn today". Don't worry about it for now!
Your device came with JB-- you didn't miss the bus for NVflash. In your case, the bus never came.
I am not responsible for any damages caused to (but not limited to) yourself or your device.
Even if you think you're pretty good at figuring this stuff out, stick to the directions as close as possible.
If you love tweaks, you're going to love your custom ROMs.
Let's get started!
Unlocking Your TF300T
Click to expand...
Click to collapse
WARNING: Unlocking your TF300T will void your warranty. If your device breaks or fails under normal use, don't expect Asus to pick up the tab! Be aware that once unlocked, it cannot be relocked.
There are two ways you can go about this-- Either download the official Asus unlock utility for Windows or download the .apk and install from your tablet (Asus utility still working! I successfully unlocked mine on JB 4.1.1). I chose to download the .apk and install directly on my tablet, therefore this is the method I will cover.
To download the .apk file, scan the QR Code below with Barcode Scanner (free; on Play store) and open the URL to the Asus Support page for the TF300T. Alternatively, if you are viewing this thread on your TF300T, you may simply tap the code below.
On the Asus Support page, select "Android" as your OS. The page will reload and present you with a list. Click on "Utilities", then after it has loaded, download the Unlock Device App. When it is done downloading, a notification will pop up in the lower right corner. Click on it to install the Unlock tool. You'll also be able to open the app immediately after the install completes-- open it now.
After scrolling to the bottom of the End User Licence Agreement, select the checkbox indicating that you agree to those terms. You should now have access to the slider that will unlock your tablet. Stay connected to your wifi and unlock when ready. The unlock will not work without access to the internet.
If I recall correctly, your tablet should reboot. Just let it do what it wants. After it's done doing it's thing, take this opportunity to make backups! when you and your tablet are ready, we'll continue on to the next step.
Setting Up The Android SDK and Installing ClockworkMod Recovery
Click to expand...
Click to collapse
Perhaps this was the most frustrating part of my experience-- Installing the Android SDK went fine when I could actually find the .exe download. After that it was a matter of getting the drivers for Fastboot working properly. I was able to narrow it down to a problem for users of Windows 7 64-bit.
From your PC, go HERE, scroll down and click on "Download For Other Platforms". Scroll down more and under the "SDK Tools Only" downloads, you should find a download that looks like: "installer_r##-windows.exe" where "##" is the revision number. Download this .exe and assuming Windows is installed on C:\, install it to either "C:\tools\android-sdk" or "C:\android-sdk". If Windows is not installed to drive letter C, replace the drive letter with the correct letter for your system. Do the same when following the command prompt examples that follow.
Open the Android SDK Manager. Search for "SDK Manager" in the start menu and you should find a result with the same name and a little android icon. Once it's open, you'll be presented with a list. Check the box next to the "Tools" folder, then expand the "Extras" folder and check the box next to "Google USB Driver". In the lower right corner, click "Install packages...", agree to all when ready and begin your downloads.
In the settings application of your tablet, go to the "Developer options" tab near the bottom. Ensure that the switch in the top right corner is in the "ON" position, then under the "Debugging" header, enable "Android debugging". Read the following carefully before you continue: Shut down your tablet and connect your USB cable. Hold the power and volume down buttons at the same time. Keep holding until you see a menu. The menu will consist of a few items, among them there is "RCK", a USB icon, an Android icon, and a "Wipe Data" icon. Tap volume down until the USB icon is selected, then press volume up. Cross your fingers and hope drivers install automatically.
They probably won't, so have windows look in the \android-sdk\extras\ folder. It should say the drivers installed successfully. Either way, open the start menu, and right click on "Computer". Click "Manage", then in the left hand pane of the new window, click "Device Manager". The "Other Devices" section may be already expanded in the center pane. If it is, look to see if "Fastboot" appears in that section with a yellow exclamation mark.
If it isn't there, you shouldn't be worried-- check for a section called "Android Phone" or "Portable Devices". Look for a device called "Android ADB Interface" or "Fastboot". It shouldn't have a yellow exclamation mark next to it.
In the event you have the device appearing with a yellow exclamation mark next to it, go HERE and download PdaNet. This was my remedy for this error. Unplug your TF300T from your computer and install PdaNet following instructions. During the install a warning will appear to install unsigned drivers. Install the driver anyway, and let the installation finish. You can now plug your TF300T back in, and it should be recognized automatically. Just in case, hold the volume down and power buttons again until your tablet restarts and you see your hidden menu again. Once again, tap volume down until the USB icon is selected, then press volume up again to select it. Check the Device Manager again and you should find the "Android Phone" section at the top. Within it, you'll find a device called "Android ADB Interface".
Now that we have your tablet and computer set up nicely, we can finally install ClockworkMod (CWM) Recovery. Go to THIS thread and download the attachment called "recovery-jb.img" (thanks XpLoDWilD!). It is VERY important that you download "recovery-jb.img" as this is the version for users with Jelly Bean bootloader!
Rename the file you just downloaded to "recovery.img" and place it in \android-sdk\platform-tools . In Windows 7, open the Start Menu and search for "cmd". You should see a result called "cmd.exe". Right click that result and click "Run as Administrator". Now type the following commands into the new command prompt window in order to flash CWM Recovery:
Code:
cd C:\tools\android-sdk\platform-tools\
fastboot -i 0x0B05 flash recovery recovery.img
DON'T unplug your tablet!! Don't close the window either! Wait for the command prompt to finish what it's doing, then you can type the final command:
Code:
fastboot -i 0x0B05 reboot
Your tablet will reboot. Once it has fully rebooted, shut it down and hold volume down and power again to access our tablet's hidden menu. This time, instead of selecting the USB icon, select "RCK" and press volume up. If I'm not mistaken, "RCK" stands for "ReCovery Kernel". ClockworkMod Recovery should load up. If it doesn't, then you were not successful in flashing CWM. If it does, then you can go to the Backup and Restore menu and create a backup.
I was overconfident when I went through all this, and I didn't make a backup-- for me, I wasn't able to get my SD card detected (64GB fat32), but even in this case you should be able to make a backup to your "Internal SD card". Unfortunately, you are on your own for this step. Make sure that you transfer this backup to your PC after creating it. You may need to disable Developer options in your TF300T's settings before you can transfer files over again.
In THIS post, XpLoDWilD gives instructions on how to Root your tablet. If I'm not mistaken, this applies to users who are using a ROM that does not already have root. If you care about Root right now, you can go ahead and flash his attached .zip file using CWM to your TF300T.
When I did this, I selected the .zip file with CWM and then went back to the main menu to select reboot. CWM then prompted me that it needed to fix permissions in order to keep Root. I tried it both ways-- first I let it fix permissions, then used a Play store app to check for root. Test came up negative, so I tried again without allowing it to fix permissions. Negative again. I tried again, allowing it to fix permissions again and then left it alone. If you are successful in rooting your TF300T, you can use Titanium Backup to backup your device later. However I used an app that did not require root that worked fine. The choice is yours.
Flashing a custom ROM
Click to expand...
Click to collapse
Now it's time to find a custom ROM to flash. For my guide I will cover Baked TF300T Blackbean #6-- Based on CyanogenMod10, and quite a nice upgrade from the stock ROM. The only downside I found is the Asus App Backup application is not included and cannot be installed. I'm unsure why this is the case-- I have even attempted to install it via CWM with no success. If you need this app or the App Locker app, I suggest you choose a non-CM10 ROM. You are on your own in deciding an alternative, but I have heard great things about CleanROM and I seem to recall reading that these incompatible Asus apps work on it. Don't take my word for it-- do your own research to make sure!
It should also be noted that ROMs like Blackbean #6 have some potentially dangerous settings that can make a power user salivate profusely.
Spiderman's Dad said:
With great power comes great responsibility
Click to expand...
Click to collapse
Okay, so it was his uncle, whatever. But either way, if you're going to install this ROM (or any other with overclock tweaks), BE CAREFUL when selecting different settings for CPU speed and overclocking. I used to overclock my PC as a hobby and pushed a 1.8GHz CPU to 2.77GHz on air cooling.. The thing I learned in the process is if you don't have the proper settings, your computer becomes unstable and weird things start happening. Data corruption, clicking the Start Menu does something crazy and unusual, PC crashes randomly, etc... Some of these errors are due to insufficient cooling-- a problem you cannot remedy when working with a portable device.
Assuming you are new to this tablet like I am, use this rule of thumb when dealing with foreign and potentially dangerous things: DON'T TOUCH IT until you understand it. Then when you understand it, understand it again. Then when you feel you've understood it twice, take baby steps. It's like jumping up a cement set of stairs-- you're definitely not going to try to jump five steps in your first attempt, unless you want to risk smashing your face and bloodying yourself up. Take it one step at a time-- make sure you can land on your feet before deciding to go further.
There's a lot of other options Blackbean #6 has that the average user can still appreciate, so ignore those overclocking/CPU stuff and focus on the other tweaks. Nova Launcher is included and is pretty sweet. I upgraded to Nova Launcher Prime and feel it's worth the extra $4, but I'll leave that for you to decide. There are more options than merely Nova Launcher alone, and not all of them have a price tag.
Without further adieu, let's download the Blackbean #6 ROM and Gapps. Head over to THIS official release thread for the downloads. The names of the files you want are:
baked_tf300t_blackbean-6_jb-bl_b6.zip
gappsinverted-jb-20121029-signed.zip
Put them into a folder called "bb6" and copy the folder over to your TF300T. If your SD card is working in CWM (from CWM, go to the "mount" menu and try to mount SD card), copy the folder to your SD card.
NOW is the time to do any final backups before your fresh ROM install! I recommend "App Backup & Restore" on the Play store. If your tablet is rooted, you can also use Titanium Backup. Both will work fine, though generally speaking people seem to prefer Titanium Backup. People also seem to prefer TWRP over CWM, but I personally find the design unappealing. More importantly, I could only find a proper guide on installing CWM on a factory flashed JB TF300T.
Once you've made your backups, don't do anything until these backups are safely transferred to your PC! Don't forget to backup your music, movies and photos...
Now that you're 100% confident you've made all the backups you need and your battery is well charged and ready to go, let's flash your custom ROM! Shutdown and enter our hidden menu you should be very familiar with by now. Boot into CWM (with RCK icon from hidden menu selected, press volume up), then press volume up/down to navigate.
READ THE FOLLOWING SECTION BEFORE DOING ANYTHING ELSE:
Select "install zip from sdcard" and tap power. If you placed your "bb6" folder on your SD card, tap the power button once more. If it says "Can't mount /sdcard/" in the bottom left corner, then select "choose zip from internal sdcard" and tap power. Earlier you should have put your ROM and Gapps in a folder called "bb6". If you can't find this folder in either the SD card or internal SD card locations, GO BACK, reboot, and make sure you put the folder on your TF300T or your SD card. You should also make sure that the ROM and the Gapps file are inside that folder as well. Do NOT unzip them! They are just fine as they are. We are NOT flashing the ROM and Gapps yet, we are merely making sure they are there before you wipe your tablet. If the files are there, go back to CWM's main menu.
Select "wipe data/factory reset" and tap the power button. Confirm that you want to wipe, wait for it to finish.
Now select "wipe cache partition" and press the power button. Confirm that you want to wipe, wait for it to finish.
Go back to the main menu and select "advanced" and tap power, then select "wipe dalvik cache" and tap power. Confirm that you want to wipe, wait for it to finish.
Don't worry! Your ROM and Gapps should still be in your bb6 folder. Navigate to "install zip from sdcard" again, and let's make the magic happen. We are going to install the ROM first, then install Gapps. Only after both the ROM and Gapps are installed will we reboot our tablet.
So select the ROM first, confirm that you want to install, wait for it to finish. This one will take a long time compared to the Gapps. Just be patient and wait, even though it looks like it's not doing anything.
Then select the Gapps, confirm that you want to install, wait for it to finish.
Finally, reboot your tablet and cross your fingers. You should be greeted with the sweet victory of the startup animation. Go through the first time setup routine, and make sure the tablet works. From here you can optionally backup your custom ROM, but I recommend getting your settings the way you like them before you backup.
Give yourself a pat on the back--you survived! Hope this guide helped someone out-- I was able to sort through my problems fine, but I felt it important to share my experience. I know I couldn't have been the first to hop through these hoops anyway.
Congrats on your custom ROM Transformer Pad. Enjoy your tablet.
P.S. Questions? Comments? Suggestions? If you have any of the three, feel free to share! If it's a suggestion, please PM me and I'll see about making edits to my guide. All are appreciated, and especially anything that clears up any uncertainties I've expressed.
Special thanks (individuals and groups I owe credit for my process):
Drgravy, Team Baked, and everyone who wrote code that was used in the Blackbean ROMs. Blackbean #6 is my first custom ROM, and so far it's been great!! Keep up the awesome work!
XpLoDWilD, for CWM Recovery + Root on TF300T. These files and instructions were the major keys in making my endeavor a success
I also want to send out a big thank you to every other individual and team who has released a custom ROM for the TF300T-- admirable work, and far more than I could ever do. Thanks for giving us options and making us excited to have a customized tablet!
(....And many more! Currently in finals week (yikes) and can't recall everything right now-- will add more as I remember)
It's a shame that such a well written guide has so little thanks. Have mine.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Very nice. hopefully this helps people just getting the tf300.
note, if you want to install TWRP recovery instead, your command will change accordingly, just make sure you type in the exact file name you want to flash. so if your recovery file is named twrp.blob:
fastboot -i 0x0B05 flash recovery twrp.blob
Thanks!
Your guide helped me a lot. I had problems only with root. Flashed 4 times, but always got "no root acces". Finally, I downloaded root package from here http://forum.xda-developers.com/showthread.php?t=1845377 and it works well
is there any way around that "unknown error..." when i try to use the unlock app yet?
I keep trying but the same error message keeps coming up
sq1ne said:
is there any way around that "unknown error..." when i try to use the unlock app yet?
I keep trying but the same error message keeps coming up
Click to expand...
Click to collapse
Is your tf300 new? first hand? or have u ever sent it to asus for repair before?
Well written, well thought out instructions. Many, many thanks!! I'm still having some trouble though. I get stuck once I download the unlock app, open it, agree to the EULA, then another warning appears that is a black screen white text and a yellow triangle. Nothing happens after that. There are no buttons to agree, no checkboxes, nothing happens. Any advice?
*UPDATE* Figured it out. Be sure to sent the font in settings->display->font size to small, then you will see it. The large font pushes the agree button off the bottom of the screen.
It would be great if CWM in this OP were replaced with TWRP. Many are having issues with CWM. Me being one of them. I flashed TWRP with fastboot and no more problems!
I agree with the post above. Sad that such a well written post has so little thanks. :good:
thnx for this amazing guide, but I am still unsure of this guide will work for me.
I am from Holland (Europe)
specs from my ASUS Transformer TF300T:
Android 4.1.1
Kernel 3.1.10 ([email protected])
Buildnr JR003C.WW_epad-10.4.2.18-20121122
Pad EC Version PAD-EC20T-0216
My question is...will this guide also work for me? ...since I have JB 4.1.1 & build 10.4.2.18
I am also worried about the fact that this guide in for an american(?) transformer I gues...so do I need other files then the files mentioned?
I would love to have ROOT and install a custom rom and remove bloatware etc.
thnx for the help in advance!
Thank you so much, perfect for so many people here.
Can you edit it with TWRP? I would use this right now but as above poster said there have been issues with CWM so don't want to try it.
P.s. i got mine from groupon too
Tamaskan said:
Is your tf300 new? first hand? or have u ever sent it to asus for repair before?
Click to expand...
Click to collapse
bought mine brand new just this past Black Friday.
updated to .18 firmware
I don't want to have to send it in.
GodfleshNL said:
thnx for this amazing guide, but I am still unsure of this guide will work for me.
I am from Holland (Europe)
specs from my ASUS Transformer TF300T:
Android 4.1.1
Kernel 3.1.10 ([email protected])
Buildnr JR003C.WW_epad-10.4.2.18-20121122
Pad EC Version PAD-EC20T-0216
My question is...will this guide also work for me? ...since I have JB 4.1.1 & build 10.4.2.18
I am also worried about the fact that this guide in for an american(?) transformer I gues...so do I need other files then the files mentioned?
I would love to have ROOT and install a custom rom and remove bloatware etc.
thnx for the help in advance!
Click to expand...
Click to collapse
Yes, it will work, I've tried it. But i suggest you use TWRP custom recovery though. CWM has high chances of getting bricked.
Tamaskan said:
Yes, it will work, I've tried it. But i suggest you use TWRP custom recovery though. CWM has high chances of getting bricked.
Click to expand...
Click to collapse
Could you also please add a NOOB tutorial for installing TWRP Recovery (this forum is very confusing in getting the right tutorials / avoiding outdated tutorials which would brick my TF300T etc)?
Example:
quote from XDA forum in TWRP topic: "The fastest and easiest way to install TWRP is to use the GooManager app" <--- GooMnager needs ROOT so I can't use this method?
My ASUS TF300T is completely untouched & unrooted still and don't won't to mess it up.
GodfleshNL said:
Could you also please add a NOOB tutorial for installing TWRP Recovery (this forum is very confusing in getting the right tutorials / avoiding outdated tutorials which would brick my TF300T etc)?
Example:
quote from XDA forum in TWRP topic: "The fastest and easiest way to install TWRP is to use the GooManager app" <--- GooMnager needs ROOT so I can't use this method?
My ASUS TF300T is completely untouched & unrooted still and don't won't to mess it up.
Click to expand...
Click to collapse
www.mediafire.com/?7v1gwbbzqzvzto7 <- fastboot and twrp, the twrp is out dated so if you want you can download new one from twrp website.
2)Extract the recovery with fastboot files zip and open a command prompt in the same folder of the adb and fastboot files (you must click the fastboot and adb when extracred and i suggest you put your extracted fastboot and recovery zip in C:\(foldername) and then open cmd)
3) Reboot into the bootloader of your tablet, type: adb reboot bootloader
4) When your tablet has reached the bootloader navigate with volume down to the usb icon and press volume up to confirm.
5) To flash the recovery type:
fastboot -i 0x0b05 flash recovery tf300t-jb.blob
Credits to krabappel2548.
Tamaskan said:
www.mediafire.com/?7v1gwbbzqzvzto7 <- fastboot and twrp, the twrp is out dated so if you want you can download new one from twrp website.
2)Extract the recovery with fastboot files zip and open a command prompt in the same folder of the adb and fastboot files (you must click the fastboot and adb when extracred and i suggest you put your extracted fastboot and recovery zip in C:\(foldername) and then open cmd)
3) Reboot into the bootloader of your tablet, type: adb reboot bootloader
4) When your tablet has reached the bootloader navigate with volume down to the usb icon and press volume up to confirm.
5) To flash the recovery type:
fastboot -i 0x0b05 flash recovery tf300t-jb.blob
Credits to krabappel2548.
Click to expand...
Click to collapse
Here is a little update on my progress...
- I unlocked the bootloader of my TF300T
- I managed to install latest TWRP
- Made a (COMPLETE) backup of the untouchedl system with TWRP <--- DO THIS BEFORE ANYTHING ELSE!
- Rooted the TF300T with the WW file in this topic: http://forum.xda-developers.com/showthread.php?t=2033205 <----works awesome!
- Made a second (COMPLETE) backup of the now ROOTED system with TWRP
- Tried installing the latest "Cleanrom 3.01 Inheritance", but got the infamous "bootloop" too...the rom has been pulled down from the forum till that is fixed ( I thought I had done something wtong flashing a custom rom, but actually a lot of others had the same problem)
- Waiting for a "bootloop fixed" Cleanrom Inheritance 3.02....and gonna try flashing it again.
first of all thanks a lot ive been going crazy looking for this!! my question is will it work for me?
i bought my tf300t in sept with ics and upgraded to jb....
also i tried this not to long ago and ran into a problem after i unlocked
so right now its just unlocked but not rooted do i need to reverse that or what?
my apologies im extremely noob haha
GodfleshNL said:
Here is a little update on my progress...
- I unlocked the bootloader of my TF300T
- I managed to install latest TWRP
- Made a (COMPLETE) backup of the untouchedl system with TWRP <--- DO THIS BEFORE ANYTHING ELSE!
- Rooted the TF300T with the WW file in this topic: http://forum.xda-developers.com/showthread.php?t=2033205 <----works awesome!
- Made a second (COMPLETE) backup of the now ROOTED system with TWRP
- Tried installing the latest "Cleanrom 3.01 Inheritance", but got the infamous "bootloop" too...the rom has been pulled down from the forum till that is fixed ( I thought I had done something wtong flashing a custom rom, but actually a lot of others had the same problem)
- Waiting for a "bootloop fixed" Cleanrom Inheritance 3.02....and gonna try flashing it again.
Click to expand...
Click to collapse
i never backup.... I only backup app using titanium backuo, if something on the rom goes wrong i just reflash latest firmware from asus website. If you like custom roms, i suggest you use Energy Rom if you want OC or Hydro rom if you want just modified stock rom with better performance.
I have a problem while I try to run the flash recovery command. I have done all steps prior to this.The only difference I see is in device manager I get "ASUS Android Devices". Now, the error I am getting comes after trying to run the command, I get "error: cannot load 'recovery.img' No error" . I have also tried the pdanet solution. Thank you for your help in advance.
Stupid question... but I am going to ask it. Having never rooted my TF300 it is on latest firmware will this guide still apply to be even though I bought my device running ICS but have updated to latest firmware? Have never rooted tablets before so all new to this.
Agera said:
Stupid question... but I am going to ask it. Having never rooted my TF300 it is on latest firmware will this guide still apply to be even though I bought my device running ICS but have updated to latest firmware? Have never rooted tablets before so all new to this.
Click to expand...
Click to collapse
It will work as long as you are using Jelly Bean
WARNING: These files are reported as not working on Next8HD8G tablets manufactured after August 2013. Check your serial number. If it begins YFG1013... YFG1113... or higher, do not use these files. You may try to root using Cydia Impactor instead. If you do root one of the newer tablets, please dump the ROM for the rest of us!
Nextbook 8"
The Nextbook 8 is an afordable 99USD tablet from walmart. Widelly adapted but not with any serious unofficial development going on. I purchased one for a friend and couldn't resist to tweak it. I tried to find some ROMs to no avail. Also rooting was a long journey. So I decided to create this resource thread to help out people to this device and even present my own ROM. So without further to do I begin :
Rooting & Recovery the Easy way
Rooting was my first concern so I could de-bloat the tablet itself since it came with various unused software. The most efficient method I came across was the one presented by shaunmt at the freaktab forums here. So let me show you how it's done.
1. Download the modified stock recovery from shaunmt
2. Extract the archive and place the image in the root of your external SD card! NOT THE INTERNAL ONE!
3. Download and copy the root package by Kyser to your external SD card!
4. Power off the tablet and then hold down both volume keys while holding the power button. The tablet should show the first splash screen and then a black one followed by the recovery screen.
5. Use the Volume keys to navigate in the menu and the power button to confirm your selection. Select flash from EXT (or something like that), then select your SD card and then select the root package to install. The root package will be installed. Navigate back to the root mneu and select "reboot system"
6. Rooting should have finished and your tablet once powered on should be permanently rooted. But in the case that you don't see a root management application go to the Play Store and download either SuperSU or Super User.
7. Finished!
ROMs
1. Stock ROM - Packed by shaunmt at freaktab - here
2. nextGen 8" - By CedArctic - Comming soon
Always perform a full wipe when installing ROMs. Neither of these ROMs has been personally tested by me. Shaunmt from freaktab owns all the work on the thread (except my ROM).
Reserved for future needs
Keep an eye on my threads at FreakTab... there is lots more coming soon...
ShaunMT
Developer at FreakTab.com
help
i did every step and installation was aborted... any tips?
You don't have the custom recovery file in your EXTERNAL sd card. The stock recovery aborts the installation due to not recognising the google installation keys.
How would I go about dumping the ROM so we can make recovery and a custom ROM. Mine is the newer one. Rooted and debloated
Sent from my MB865 using XDA Premium 4 mobile app
sir shaunmt can you examine my dump files if it is usable in porting any custom recovery in my device? here's my dump file..
http://www.4shared.com/rar/kpulgLt3ce/romdump.html?
thanks for the help in advance..
Same here
I picked one up for either modding or dismantling it to see if I could build it. So the root thing is new to me, I have been spending a few days reading over you guys tuts and suggestions. I came across this one and it seemed fairly simple, take the downloads, extract to SD and recovery reboot? However it has not worked. If I push both volumes I get small yellow script at top saying DNX Fastboot mode, if I do the volume up button with power, I get the options of REBOOT, RECOVERY,POWER OFF, and I believe one other one. Either way I seem to hit a wall. I'm have no doubt it's me, but I would a appreciate a lil advice.
Thank you
NX008HD8G, Firmware? Root?
Hey Guys! I was wondering if maybe there was another link to the files? Has anyone figured out how to update the firmware on the NX008HD8G? I’m having trouble trying to root and I’m unable to find anything on how to at least update the firmware to 4.4.2. I’ve been having trouble with google play services, and could use either the stock rom or maybe a custom. Please help! Hopefully someone sees this!
Rooting NX008HD8G
These files are dead. Is there anything way you could update them? I’m unable to root or even update firmware. :victory: @CedArctic @shaunmt
I lost the root on both of our Nexus 4 and Nexus 5 phones that were stock and updated to 4.4.3 via OTA. I didn't know how to correct it, as I couldn't find any information about it, and realized the solution (at least for me) was relatively simple (copy/paste from Jubakuba's Ultimate Nexus 4 Root Guide)
Obtaining Root Access and Custom Recovery:
Turn on USB Debugging.
To do so; you must first go to Settings>About>Build Number and click seven times.
The actual setting can then be found in Settings>Developer Options>USB Debugging
Download the following:
SuperSU (CWM.zip)
CWM (Pick the version for your device)
Place the recovery-clockwork-VERSIONNUMBER-mako.img file into your C:\android-sdk-windows\platform-tools folder.
Put the SuperSU.zip on your phone.
Open another Command Prompt if it isn't still open. (Navigate to C:\android-sdk-windows\platform-tools and shift + right click. Select "Open Command Window Here.")
With your phone plugged in type:
adb reboot bootloader (Hit Enter)
And wait for your phone to boot into the android again.
Now type:
fastboot flash recovery IMAGENAME.img
(Change the file name to the correct file name and Hit Enter)
Once that is finished: select the "Recovery Mode" option again on your phone.
You should get a new recovery menu here. Select "install zip from sd card" and "choose zip from sd card."
Find the SuperSU.zip that you transferred earlier and select "Yes" to installing.
Navigate back to "Reboot" and reboot your phone.
You're now rooted!
silly guy.. you will ALWAYS lose root if updating via ota. and you will lose your custom recovery. all you need to do is flash a custom recovery onto your device via fastboot, then flash the latest supersu via the recovery, then boot up. that is all. its much easier to flash the latest rooted stock rom than take an ota.
How is it possible that you don't know how to re-root the phone this time.....if you rooted it previously in the first place? Someone else rooted it originally, bought it used from someone else that rooted it? Perplexing.
hahahaha as I read this I thought the same thing as well. How do you not know how to re-root a Nexus a Nexus? Easiest phone to root and why would you think that upgrading would not remove root.... Its ok it happens OP now in the future you will be more knowledgeable...
playya said:
hahahaha as I read this I thought the same thing as well. How do you not know how to re-root a Nexus a Nexus? Easiest phone to root and why would you think that upgrading would not remove root.... Its ok it happens OP now in the future you will be more knowledgeable...
Click to expand...
Click to collapse
You guys need to take it easy on someone who doesn't do this one a daily basis. Consider me a noob, who roots phones once in a blue moon with line-by-line instructions, and the moves on with life until an OTA or something else happens. If the rooting process is enough times, the knowledge eventually sticks, but in my case there are more important things to remember, like my anniversary or the names of my kids.
PiCASSiMO said:
You guys need to take it easy on someone who doesn't do this one a daily basis. Consider me a noob, who roots phones once in a blue moon with line-by-line instructions, and the moves on with life until an OTA or something else happens. If the rooting process is enough times, the knowledge eventually sticks, but in my case there are more important things to remember, like my anniversary or the names of my kids.
Click to expand...
Click to collapse
I see responses like yours all the time. I'm not saying that this is the most important thing in my life but if I'm going to try in root a piece of equipment that I've paid a decent amount of money for I'm going to make sure I know what the heck I'm doing.
Sent from my Nexus 4 using Tapatalk