After i have installed my TWRP i think my LG g2 have bricked
After i restart my phone this is the only thing that appers to me:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(the blue mark its not problem, always have that)
I know that look like the screen is cracked but the screen was allright until i restart my phone,
please help me
That may just be the white line issue? I have not actually seen it myself but if you do a quick search you should be able to fix it. Worst case you can just boot into download mode and restore to stock, it is software based since it happened after a flash.
The white line issue occurs if you flash a kernel or recovery which is meant for the JDI display but you migh have an LGD. Look or your twrp you flashed is meant for only one. I suggest to check out dr87 twrp recovery since it has display detection.
You didn't bricked your phone, maybe a bit softbricked but further nothing to worry about.
Hi, thanks for the replys
My only problem is that when i connect my phone to my pc doesn't connect it, and only appears the white lines
Can you help me?
wulsic said:
The white line issue occurs if you flash a kernel or recovery which is meant for the JDI display but you migh have an LGD. Look or your twrp you flashed is meant for only one. I suggest to check out dr87 twrp recovery since it has display detection.
You didn't bricked your phone, maybe a bit softbricked but further nothing to worry about.
Click to expand...
Click to collapse
Hi, can you tell me some advices to try to recover my phone to life?
Thanks
Eriio said:
Hi, can you tell me some advices to try to recover my phone to life?
Thanks
Click to expand...
Click to collapse
you can flash maybe with adb sideload in the recovery another kernel,
you can go to download mode and restore to stock.
Is your screen completely white or white lines?
wulsic said:
you can flash maybe with adb sideload in the recovery another kernel,
you can go to download mode and restore to stock.
Is your screen completely white or white lines?
Click to expand...
Click to collapse
I can't, my lg g2 do not connect to my computer, my computer only detect adb android and not my phone.
When i start my phone nothing appens, only the white lines and thats all!
I tried everything but i cant go to download mode, i think the phone does not start
Eriio said:
I can't, my lg g2 do not connect to my computer, my computer only detect adb android and not my phone.
When i start my phone nothing appens, only the white lines and thats all!
I tried everything but i cant go to download mode, i think the phone does not start
Click to expand...
Click to collapse
Wait after you've installed it... Did you install it with a app within Android?
If so then I think it might've flashed it wrong to maybe a wrong partition or what, I will search for you.
wulsic said:
Wait after you've installed it... Did you install it with a app within Android?
If so then I think it might've flashed it wrong to maybe a wrong partition or what, I will search for you.
Click to expand...
Click to collapse
Actually i dont know, the only think i know is that i used to have a recovery installed and I install TWRP too, and when i restart the phone it started with the white lines and do not connect to computer
Eriio said:
Actually i dont know, the only think i know is that i used to have a recovery installed and I install TWRP too, and when i restart the phone it started with the white lines and do not connect to computer
Click to expand...
Click to collapse
I've didn't found really much but you could also check in general/ google for people with the same problem and if nothing works then you have to try that unbricking thing guide where you have to reflash partitions etc.
wulsic said:
I've didn't found really much but you could also check in general/ google for people with the same problem and if nothing works then you have to try that unbricking thing guide where you have to reflash partitions etc.
Click to expand...
Click to collapse
But how can i reflash a partition if my computer dont even recognize my phone?
Eriio said:
But how can i reflash a partition if my computer dont even recognize my phone?
Click to expand...
Click to collapse
The thing is that you need to open your phone then so that's risky. I suggest to google for people with the same problem and maybe search if there's a fix else you maybe got to sell your phone or try that risky way to fix it.
wulsic said:
The thing is that you need to open your phone then so that's risky. I suggest to google for people with the same problem and maybe search if there's a fix else you maybe got to sell your phone or try that risky way to fix it.
Click to expand...
Click to collapse
No one is to stupid to make the same thing that i have made.
There is none problem like mine
Try going to the download mode by powering off the phone completely then holding the vol up button and inserting the USB cable. The usb cable must be connected to your computer.
Eriio said:
After i have installed my TWRP i think my LG g2 have bricked
After i restart my phone this is the only thing that appers to me:
(the blue mark its not problem, always have that)
I know that look like the screen is cracked but the screen was allright until i restart my phone,
please help me
Click to expand...
Click to collapse
mate i have same problem. How can u solve ? plz help me
cnaukai said:
mate i have same problem. How can u solve ? plz help me
Click to expand...
Click to collapse
Hi
There's no problem! I'll explain to you.
The problem is you have a bad kernel instaled and that's why you have the lines. When you power on your phone you can't see but there's a message related to "NO Recovery mode, No download mode", it's "Secure booting error".
So you have to follow all the steps on this tutorial:
http://forum.xda-developers.com/showthread.php?t=2582142
When you have all that done you'll have your phone back!!
The only problem will be (at least for me) the lines will be there in the same, so you have to find the best kernel to your rom
I think that's all, GOOD LUCK!!
Eriio said:
Hi
There's no problem! I'll explain to you.
The problem is you have a bad kernel instaled and that's why you have the lines. When you power on your phone you can't see but there's a message related to "NO Recovery mode, No download mode", it's "Secure booting error".
So you have to follow all the steps on this tutorial:
http://forum.xda-developers.com/showthread.php?t=2582142
When you have all that done you'll have your phone back!!
The only problem will be (at least for me) the lines will be there in the same, so you have to find the best kernel to your rom
I think that's all, GOOD LUCK!!
Click to expand...
Click to collapse
adb not working. No fastboot is there any other way
cnaukai said:
adb not working. No fastboot is there any other way
Click to expand...
Click to collapse
You don't need fastboot!
If you follow all the instructions it will work (i think in the windows too, don't remember if I made it on windows or linux).
You have to install all the drivers, and then you'll do it
If you can't do it, try this:
https://www.youtube.com/watch?v=QK40sjiDq0Y
But i have made the same thing that i sent you (link of xda) and that worked for me!
Eriio said:
You don't need fastboot!
If you follow all the instructions it will work (i think in the windows too, don't remember if I made it on windows or linux).
You have to install all the drivers, and then you'll do it
If you can't do it, try this:
https://www.youtube.com/watch?v=QK40sjiDq0Y
But i have made the same thing that i sent you (link of xda) and that worked for me!
Click to expand...
Click to collapse
How can i run fastboot mode phone
cnaukai said:
How can i run fastboot mode phone
Click to expand...
Click to collapse
You don't need to run anything, when you turn on your phone you don't see but appear a error message. Then if you follow all the instructions (commands) in the tutorial of xda you'll have to delete the img on your phone and replace them with the new ones!
Then you install the original rom or the rom you choose and when it work you'll have to find the best kernel!
If you leave a comment on the tutorial they will help you better!
Anyway you can ask me anything!!
Good Luck!
Related
Hey guys,
Bare with me please as I am fairly new-ish to Android but have some experience with Samsungs, HTCs and the beloved LG GT540.....
I appreciate if anyone can help me on my plight.....
My girlfriend was running Cyanogen Mod for the last year or so on her device and decided that she wanted to try out a different ROM on her phone....
I wanted to install the Oxegen ROM....
Originally I was thinking it would be easy and I could put it on through Clockwork Recovery and flash the zip no problem, for some reason when I rebooted to recovery clockwork would not load up on the device.... just blank screen....
Not content with this, bored on a Sunday afternoon I gave it a couple of hours of my time and in the process messed my girlfriends phone up....
What I did was I tried flashing back to stock using the LG KDZ updater, that was fine and the phone rebooted and has since stuck on the Android logo....
According to this thread : http://forum.xda-developers.com/showthread.php?t=1078745&highlight=stuck+on+android+screen I gave all this a go and I can not get the device showing up in Fastboot, I can not enable USB debugging on it either as I can not get into the phone to tick the box....
In my cmd prompt I am seeing this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In my device manager when my device is connected and powered on I am seeing this :
When I am connected and the device is in "download mode" my devices are like this :
I understand the steps provided in the link above and I am fairly confident I could do them if I can get the device "seen" in Fastboot....
I have installed and re-installed all the USB drivers in hope that it may be a driver issue, now I am wondering is it maybe my OS? Win7 64Bit Ultimate?
I can try it on XP netbook if thats all thats causing my issues....
I am kinda lost now and wondering have I bricked it? It will be the first phone I have if thats the case....
Any help would be appreciated, thanks a lot guys....
Mods if this is in the wrong area, please feel free to move my post.....
did u go to fastboot (power+camera pressed when booting up).
well, from my experience, if i flash incorrectly (via fastboot or recovery), it will go bootloops or go to clockwork, or if i flash incorrectly via kdz, i've got stuck in LG logo or got linux kernel panic.
it seems to me u've flash kdz incorrectly. flash kdz with fastboot mode via download (or emergency mode).
try this:
http://forum.xda-developers.com/showpost.php?p=13184840&postcount=42
and make sure u already install all LG drivers (u can Google those).
gud luck. if else fails, put a very sad and stupid face, act as u dont know anything, bring the phone to the LG representative in ur town.
idk for 64 bit version as i use 32 bit. u can try find pdanet driver, there is 64 bit driver there and it install fastboot well in PC.
m1st3r1 said:
did u go to fastboot (power+camera pressed when booting up).
well, from my experience, if i flash incorrectly (via fastboot or recovery), it will go bootloops or go to clockwork, or if i flash incorrectly via kdz, i've got stuck in LG logo or got linux kernel panic.
it seems to me u've flash kdz incorrectly. flash kdz with fastboot mode via download (or emergency mode).
try this:
http://forum.xda-developers.com/showpost.php?p=13184840&postcount=42
and make sure u already install all LG drivers (u can Google those).
gud luck. if else fails, put a very sad and stupid face, act as u dont know anything, bring the phone to the LG representative in ur town.
idk for 64 bit version as i use 32 bit. u can try find pdanet driver, there is 64 bit driver there and it install fastboot well in PC.
Click to expand...
Click to collapse
Fastboot and ADB works on Windows 7 Home Premium 64bit. I installed LG Drivers then Google USB Driver. It worked then. But I know I did struggle to finally get it working.
Thanks a lot for the advice and replies guys....
As I said, I think my problem lies in not being able to tick the USB debugging option on the phone as I can not boot into the phone to do so....
Is there a way to enable USB debugging over ADB?
As I said, I can "see" the phone responding to ADB, just not fastboot!
I am in the process of installing everything and starting fresh on the Xp netbook, if this fails I would say its new phone time for my g/f, Sony X8 is 80 euro on our network so if the worst comes to the worst I will get her a new one....
Much appreciated guys and if anyone has anything to the thread I will be all ears...
Cheers!
Ko_Ka said:
Thanks a lot for the advice and replies guys....
As I said, I think my problem lies in not being able to tick the USB debugging option on the phone as I can not boot into the phone to do so....
Is there a way to enable USB debugging over ADB?
As I said, I can "see" the phone responding to ADB, just not fastboot!
I am in the process of installing everything and starting fresh on the Xp netbook, if this fails I would say its new phone time for my g/f, Sony X8 is 80 euro on our network so if the worst comes to the worst I will get her a new one....
Much appreciated guys and if anyone has anything to the thread I will be all ears...
Cheers!
Click to expand...
Click to collapse
i think u got it wrong.
read here: http://android-dls.com/wiki/index.php?title=Fastboot and here: http://wiki.cyanogenmod.com/wiki/Fastboot
first of all, i need to ask u the question (again), can u boot to fastboot (or bootloader) when u pressed power (the reject/red phone button) and camera button altogether? the fastboot screen in the phone will be like black screen, but with a little amount of backlight (u'll notice the difference) or blue screen with texts if u flash a kdz-modified-fastboot. if u cant go to bootloader/fastboot, then u need to flash a kdz with fastboot.
u can try this: when u type adb devices, type: adb reboot bootloader
though im not sure if ur gf's phone has fastboot/bootloader (might be missing during the kdz flashing that u've done).
when u type adb devices
m1st3r1 - if you ever come to Dublin, I will buy you a beer!
After nearly 3 days of pulling what hair I have left on my head out, my problem was I was mistaking Fastboot for Download mode.....
I was connecting the phone holding the volume down so it came up "download mode" now all I did was hold the camera + red button and off it went with the command from the post above....
I feel like an idiot, but im a happy idiot right now.....
Thanks a lot, means a lot to me.... (and my girlfriend!)
LOL welcome to the hackers club
Try to return to stock from cyanogenmod, install the 4.1.2 baseband and I showed up this screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I thought I could get it back by KZD and appears this:
I need your help to get my phone if you can help me appreciate it all.
Look for a file v10d_downgrade.kdz in the net, you have to flash that. And the flash whatever kdz you want
It wont work with other kdz.
Ps: i see a white screen in the first photo
Sent from my LG-E612g using Tapatalk 2
raul338 said:
Look for a file v10d_downgrade.kdz in the net, you have to flash that. And the flash whatever kdz you want
It wont work with other kdz.
Ps: i see a white screen in the first photo
Sent from my LG-E612g using Tapatalk 2
Click to expand...
Click to collapse
It does not work, the KDZ throws me the same error. Look:
DELETED sorry wrong post
First of all reinstall the drivers on your computer
Then, did you try to remove the battery, plug the phone to your computer (without the battery), then try to start the phone in Emergency Mode?
If you get to the Emergency Mode with the correct drivers installed, you should be able to flash anything from KDZ.
This method was the only way I could get my L7 in Emergency Mode AND recognized by KDZ, so you could be in the same situation as me maybe?
That method never worked for me, did you get a "UpTestEX_mod2_marwin.exe" in the packge that you downloaded? Use that, select emergency and the v10d_downgrade and flash! (follow a tutorial, you need to install small http server before...... like here)
have u tried "vol down" + "power button"
and when buttons light up, press the "menu" button
and do it a couple of times?
Nothing I've read has worked for me, trying to read the information on the device I get this:
venezuelanboy said:
Nothing I've read has worked for me, trying to read the information on the device I get this: /QUOTE]
Read Information never works, you have to "upgrade start" rigth away! Don't worry about that error
Click to expand...
Click to collapse
raul338 said:
venezuelanboy said:
Nothing I've read has worked for me, trying to read the information on the device I get this: /QUOTE]
Read Information never works, you have to "upgrade start" rigth away! Don't worry about that error
Click to expand...
Click to collapse
Upgrade Start does not work
Click to expand...
Click to collapse
Let pass without touching the screens and it appeared this, the touch screen does not work at this point, I touch it and nothing happens.
At a time when one of the combinations I appeared the cwm recovery, but when I restart the screen turned white and yellow of the previous photos.
raul338 said:
venezuelanboy said:
Nothing I've read has worked for me, trying to read the information on the device I get this: /QUOTE]
Read Information never works, you have to "upgrade start" rigth away! Don't worry about that error
Click to expand...
Click to collapse
Upgrade Start does not work
Click to expand...
Click to collapse
venezuelanboy said:
raul338 said:
Upgrade Start does not work
Click to expand...
Click to collapse
Did you set up small http server & configure it? (also with host file)
Sent from my LG-E612g using Tapatalk 2
Click to expand...
Click to collapse
Hey friend. I have already almost lost my phone several Times.
But persistance is the best to resolve your problem.
Firstly ur phone isnt bricked as it turns on!!!
So try this:
1° turn off phone
2° bottom up + down + turn on
3° should apper "emergency mode" [if this didnt work, try And get in this screen"
4°flash KDZ ( MAKE SURE ITS ON EMERGENCY MODE ON KDZ UPDATER ! AND THE MOST
IMPORTANT WHEN YOU FLASH IT WILL POP UP SEVERAL ERROS . DONT DO NOTHING LET IT CONTINUE )
5° Phone will boot loop (resolve it making a HARD RESET (bottom down+ menu+turn on)
6° now it will reset everything. Then u must flash AGAIN KDZ UPDATER (BUT NOW IT WONT SHOW ERROS ON KDZ UPDATER )
Job done
Phone recovered
PM ME IF ANY DOUBT OCCOURS
Sent From ... Lg e400 <-- {[Brasilian Here]}
Enter in DIAG MODE vol up+vol down+ turn on
(Just do it IF -> u have tried my tip ABOVE this one.)
After that , make sure u connect ur phone then, flash in KDZ UPDATE.
NO ERROR . THIS MUST WORK FOR YOU . AND AS I SAID
IF IT DONT RECONIZE YOUR PHONE THEN U MUST HARD RESET IT .
Sent From ... Lg e400 <-- {[Brasilian Here]}
Finally I could fix the problem without using KDZ and now I want to share with the community.
1. Remove the phone battery.
2. Press the button '+', and connect the usb (without battery).
3. Wait until the drivers are installed on the computer.
4. With the program of LG Mobile Support Tool, and with the phone connected press "Upgrade Error recovery" within the program.
5. Let it download the rom, you unzip and install.
Note: All this process without the battery attached to the phone.
That's all
Bootloop on CMWR and phone never close, only without battery!
Hello.
Today i want to upgrade my android, and surprise! When i push "install"and phone is was restarted, is entered in a continuos loop restart directly in CMWR mode. Here, it was impossible to install anything or make any changes, only "restart", and again, the phone is restarting directly in CMWR mode. At first I thought I bricked my phone, because even in emergency mode it could not start
BUT all this is madeit with battery inside!
After reading what was written here, I realized that I have to remove the battery, and surprise, on the second attempt i managed to start in emergency mode! (with usb cable connected to PC! ) :laugh:
Good...
Now, i openet the "LG Mobile Support Tool" (with usb connected to PC), and after LG mobile tool i let to check and install the last version of USB drivers , it was able to communicate with my PC. After that, i installed the latest available version of Android, via LG Mobile Tool and now is working.
BUT i lost the root of the phone. Anyway, it's the phone of my wife, and she's not interested in "walked" through it
Thanks to "andersonlima" , i understand that as long as boots, is not bricked !
Good luck in the future, and most importantly, read well, with calmness, that can occur various ideas, along with what you have in face, may lead to solving your problem! :good:
venezuelanboy said:
Finally I could fix the problem without using KDZ and now I want to share with the community.
1. Remove the phone battery.
2. Press the button '+', and connect the usb (without battery).
3. Wait until the drivers are installed on the computer.
4. With the program of LG Mobile Support Tool, and with the phone connected press "Upgrade Error recovery" within the program.
5. Let it download the rom, you unzip and install.
Note: All this process without the battery attached to the phone.
That's all
Click to expand...
Click to collapse
Omg man, thanks! Worked perfect, but i used kdz, lg software does not worked.
hi everyone, i accidentaly used the AutoRecLs980 app to flash the recovery to a D800 and now the device is bricked and wont boot on recovery nor on android,,, just keep showing those lines:
[850] Fastboot mode started
[900]udc_start()
i tried the command "fastboot devices" on sdk and i got this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
like is partially recognizing the device..
>>can i try flashing a TWRP.img? or what i did has broken other than recovery partitIon on the devices and that wont solve my problem..
i also founded this: http://forum.xda-developers.com/showthread.php?t=2582142 but dont know if will help me..
thanks so much for triying to help me.
elmy2424 said:
hi everyone, i accidentaly used the AutoRecLs980 app to flash the recovery to a D800 and now the device is bricked and wont boot on recovery nor on android,,, just keep showing those lines:
[850] Fastboot mode started
[900]udc_start()
i tried the command "fastboot devices" on sdk and i got this:
like is partially recognizing the device..
>>can i try flashing a TWRP.img? or what i did has broken other than recovery partitIon on the devices and that wont solve my problem..
i also founded this: http://forum.xda-developers.com/showthread.php?t=2582142 but dont know if will help me..
thanks so much for triying to help me.
Click to expand...
Click to collapse
jump on irc, freenode, lg-g2 channel. Tell them you used the wrong auto-rec and u are able to get into fastboot. They will give you/direct you to partitions for your phone. You will then need to flash these partitions. Probably the correct aboot and laf(downloadmode), and recovery(maybe not). You will then be able to get into download mode, where you can flash a stock rom. Or possibly give you old aboot and directly flash a custom recovery. Not sure. Go and ask.
elmy2424 said:
hi everyone, i accidentaly used the AutoRecLs980 app to flash the recovery to a D800 and now the device is bricked and wont boot on recovery nor on android,,, just keep showing those lines:
[850] Fastboot mode started
[900]udc_start()
i tried the command "fastboot devices" on sdk and i got this:
like is partially recognizing the device..
>>can i try flashing a TWRP.img? or what i did has broken other than recovery partitIon on the devices and that wont solve my problem..
i also founded this: http://forum.xda-developers.com/showthread.php?t=2582142 but dont know if will help me..
thanks so much for triying to help me.
Click to expand...
Click to collapse
Damn please report back if you resolve your issue. I'm sure you'll help anyone else who might themselves in a similar situation
You can install the Stock ROM For KDZ file, the G2 will be restored...
Search in Google/Youtube: Back To Stock ROM LG G2
PS. You can only enter the Download Mode with the G2 connected with PC by USB
he can't enter dld mode.
1. download autorec for your version
2. extract aboot - boot - laf
3.
fastboot flash aboot aboot.img
fastboot flash boot boot.img
fastboot flash laf laf.img
I did the same thing. Recovered by flashing the correct laf.img with fastboot, which repaired download mode. Then use download mode with a .kdz file and the (un)official LG rescue tool.
Sent from my LG-D801 using XDA Free mobile app
did you readed the title of mi post???
NO DOWNLOAD MODE...
@bender_007 @jug6ernaut@ahilliard
really thanks:laugh: ill do it as soon as i get in my house.
i was thinking to flash all the partitions since i didn´t know which one had the DOWNLOAD MODE xD, thanks again
elmy2424 said:
@bender_007 @jug6ernaut@ahilliard
really thanks:laugh: ill do it as soon as i get in my house.
i was thinking to flash all the partitions since i didn´t know which one had the DOWNLOAD MODE xD, thanks again
Click to expand...
Click to collapse
Just the ones I wrote. Don't touch others.
Solved
elmy2424 said:
Solved
Click to expand...
Click to collapse
I'm sorry that I write here but if I do not want to create a new topic. Maybe someone is able to help?
Hello my problems started up in the morning as I came up with a kernel update.
Mistakenly threw versions of the D800 and the phone went into fastboot.
I tried the method with a live CD of Ubuntu but it does not fit me these many partitions so I can not write it these paintings partition.
I tried to unpack the correct kernel to a file boot.img fastboot flash I uploaded by write and quite like to be spoiled because I wrote that there is no certificate or something - so as to completely fell boot.
But after some time did enter into download mode I uploaded versions V220D and went.
Now phone can enter to download mode but charges only to the logo and the LED flashes blue and green.
The computer sees the phone software from LG emergency phone does not play because he writes with is the newest version but see the battery level and what I currently versions.
What else to do to restore phone?
I would be very grateful.
will find some time for you later
bender_007 said:
will find some time for you later
Click to expand...
Click to collapse
thank you very much
sarzyk said:
thank you very much
Click to expand...
Click to collapse
hm..I see you managed to flash the rom ?
so the problem is you didn't wipe.
turn the device OFF
hold power + volume down until you see the LG logo, release the buttons for a moment and then hold volume down + volume up. On the white screen confirm 2-3 times with power button. After the factory reset (the thing you just did) it will boot.
bender_007 said:
hm..I see you managed to flash the rom ?
so the problem is you didn't wipe.
turn the device OFF
hold power + volume down until you see the LG logo, release the buttons for a moment and then hold volume down + volume up. On the white screen confirm 2-3 times with power button. After the factory reset (the thing you just did) it will boot.
Click to expand...
Click to collapse
you are a god.
Cleans all day interencie but nowhere have written about this to keep the volume + and - raze ..
For now operates proof, and write exactly what and how.
We would like to thank my friend.
Please write more as I'll official* Rom from LG is the site can check if a ROOT or another Rom if it was uploaded?
Where can I check whether they were any signs of interference?
Is it only in Download Mode it says?
I got a new LG G2 D802 today, managed to root and I used AutoRec to install TWRP. The app said it was successful but as soon as I booted into recovery, I get this screen and it's stuck.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If I hold the power button for 10 seconds, it goes black. Then when I press it again, the lines move about like its a broken splash screen.
Really, really appreciate anyone that can help get me back to a working phone - I'm using a mac.
Thanks.
alltheway3 said:
I got a new LG G2 D802 today, managed to root and I used AutoRec to install TWRP. The app said it was successful but as soon as I booted into recovery, I get this screen and it's stuck.
If I hold the power button for 10 seconds, it goes black. Then when I press it again, the lines move about like its a broken splash screen.
Really, really appreciate anyone that can help get me back to a working phone - I'm using a mac.
Thanks.
Click to expand...
Click to collapse
So when you turn it on your phone after turning off you don't see the LG screen but only the lines? or only in the recovery?
wulsic said:
So when you turn it on your phone after turning off you don't see the LG screen but only the lines? or only in the recovery?
Click to expand...
Click to collapse
Thanks for the reply. This is all I see. The lines move about a bit then get stuck on the above screenshot. I can't get into recovery :crying:
alltheway3 said:
Thanks for the reply. This is all I see. The lines move about a bit then get stuck on the above screenshot. I can't get into recovery :crying:
Click to expand...
Click to collapse
Try entering download mode - poweroff the device -> hold volume up and connect to pc. Then try flashing your stock firmware.
bender_007 said:
Try entering download mode - poweroff the device -> hold volume up and connect to pc. Then try flashing your stock firmware.
Click to expand...
Click to collapse
Just tried that - it switched the phone on - the lines moved around again then settled into the screenshot.
Do I need the drivers installed on a PC for this to work? I tried it on a mac with Android File Transfer.
alltheway3 said:
Just tried that - it switched the phone on - the lines moved around again then settled into the screenshot.
Do I need the drivers installed on a PC for this to work? I tried it on a mac with Android File Transfer.
Click to expand...
Click to collapse
You need windows + lg flash tool 2014 + your kdz, drivers would install through the lg suite.
bender_007 said:
You need windows + lg flash tool 2014 + your kdz, drivers would install through the lg suite.
Click to expand...
Click to collapse
Thank you - I'll give it a shot. Where can I find the KDZ?
Here m8, to be sure you have the correct one.
bender_007 said:
Here m8, to be sure you have the correct one.
Click to expand...
Click to collapse
Unfortunately I can't get to the dialer to get my IMEI. I know they used to be under the battery but thats obviously a no no on the g2.
Regardless, I found the .kdz here http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/Hong+Kong+D802/
Installed the drivers, LG Flash Tool 2014, attempted to put my phone into Download mode (The phone has the grey lines in different places) but the PC still doesn't recognize the phoen when I plug it in and the flash tool cannot read the phone also.
Any other suggestions please? Thanks.
You may also try the tot method.
Can you recognize if the image behind the lines is small (centered on the screen) or a larger one ?
Because it might be that you've got blue circles, which are shown prior to entering the actual download mode..
bender_007 said:
You may also try the tot method.
Can you recognize if the image behind the lines is small (centered on the screen) or a larger one ?
Because it might be that you've got blue circles, which are shown prior to entering the actual download mode..
Click to expand...
Click to collapse
I don't actually know if its going into download mode or not. I've taken another photo as below which shows what my phone looks like when plugged in, the lines move around like an animation to start of with then settle in this position - there isn't actually anything behind the lines. It's almost as if the screen is messed up and the pictures aren't displaying correctly. I seriously doubt it is a hardware issue as it was working just fine before using AutoRec.
Just so annoyed at myself for doing this so soon after I got it -_-
1. power off
2. hold volume up and connect to pc
3. flash kdz
________________
or just connect to pc if it doesn't boot, see if there is some device in device manager that wasn't there.
bender_007 said:
1. power off
2. hold volume up and connect to pc
3. flash kdz
________________
or just connect to pc if it doesn't boot, see if there is some device in device manager that wasn't there.
Click to expand...
Click to collapse
To make things more clear, I've posted a video of going into download mode and showing the flash tool. Maybe this will help?
https://www.youtube.com/watch?v=KBNnYC0hmzs&list=UUc_6uazlw8MzDK9s4gvdscA
Did you install the drivers or not ?
I'll send you few links later, please remind me one more time via inbox.
Iam facing the exact same issue right now
Phone was already soft bricked. user to get stuck at the lg logo and download modestopped working , volume + power would bring fast boot so i used adb command prompt and flashed boot,aboot and recovery files and then did a reboot and all i have are these moving gray lines
IF anybody resolved this issue please help with the steps
I have a same problem. Please help me, please !
Where did you buy the phone? Some online sellers combine parts from all variants and sell refurbished phones under D802 so when you flash it bricks your phone.
Do you have IMEI on box?
Mashed_Potatoes said:
Where did you buy the phone? Some online sellers combine parts from all variants and sell refurbished phones under D802 so when you flash it bricks your phone.
Do you have IMEI on box?
Click to expand...
Click to collapse
Same thing happened with mine. Got it fixed for 20$ through Jtech service.
Beware people.
I have same problem here. When connect via USB, Showing in device manager as Android device. But not showing anything under COM port. I tried to flash via LG flash tool. But flash tools fail to connect device. please help me to solve this. I am a Sri Lanka. If you a place to repair my phone. Please advise.
Thank You.
Same thing happened with me when i use autorec, lines on the screen but the phone work normally, receive calls and messages, the touch works normally, every thing work normal but there's no screen output or colors only gray lines wuth black screen. I think it's a refurbished phone with a different board that written on the cover, and we use the wrong autorec according to the board.
I don't know how to fix it. Any help ?
my lumia 520 is bricked after flash of android but is vibrating and and connecting to pc but showing android in device managment. any solutions?
not detected by cmd or windows device recovery tool.
janjuaalpha said:
my lumia 520 is bricked after flash of android but is vibrating and and connecting to pc but showing android in device managment. any solutions?
not detected by cmd or windows device recovery tool.
Click to expand...
Click to collapse
Try to get into recovery by press the power button and volume + at the same time
If you can get to recovery , you can try it again , or comeback Windows Phone
Ryonic said:
Try to get into recovery by press the power button and volume + at the same time
If you can get to recovery , you can try it again , or comeback Windows Phone
Click to expand...
Click to collapse
it vibrates but shows only android i have tried every key combination.
janjuaalpha said:
it vibrates but shows only android i have tried every key combination.
Click to expand...
Click to collapse
Do you flash the rom yet?, or just install bootloader and recovery?
If your device get bricked after run the uefi2lk.cmd , tell me and i will show you the way to fix it
P/s : Sorry about my bad english skill
i flashed bootloader and recovery and my nokia bricked after that
Ryonic said:
Do you flash the rom yet?, or just install bootloader and recovery?
If your device get bricked after run the uefi2lk.cmd , tell me and i will show you the way to fix it
P/s : Sorry about my bad english skill[
hello plzzz i went restore my nokia lumai 520 andrio TO windows i have backup flash plzzzz send me tuto or video plzzzzzzz
Click to expand...
Click to collapse
janjuaalpha said:
my lumia 520 is bricked after flash of android but is vibrating and and connecting to pc but showing android in device managment. any solutions?
not detected by cmd or windows device recovery tool.
Click to expand...
Click to collapse
You phong is working,just need flash recovery
Ryonic said:
Do you flash the rom yet?, or just install bootloader and recovery?
If your device get bricked after run the uefi2lk.cmd , tell me and i will show you the way to fix it
P/s : Sorry about my bad english skill
Click to expand...
Click to collapse
no i just flashed recovery but tried to flash rom but not sucessful
I'm having a really similar issue that I've had for nearly a whole year after flashing Android. I myself am trying to roll back to WP 8.1 however I cannot flash the hex file (emergency) back.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also I want to point this out, Lumia 520/521 devices have issues with reading and writing as explained here
So you install the recovery of android already? , if that so , you can't used this way to roll back to WP 8.1
P/s: I've met a lot of error when try to install android on my lumia 520 , and finally , i can't touch or do anything in TWRP because my digitizer is not original . So I rollback to windows 8.1 and sell it
Use should used this tutorial : https://forum.xda-developers.com/no...nt/restore-windows-phone-8-installed-t3608223
You need to have a backup , if you don't , you have to stick with android.
I think all the error when install android on lumia 520/521/525 could all be fixed , except when you have a samsung emmc :fingers-crossed:
Try to enter recovery with fastboot. Connect the Phone to the PC, and open fastboot in cmd and type this:
fastboot oem reboot-recovery
If you installed successfully the recovery, it will appear in the phone. (It may take 30 seconds or less in appear)
Seems people aren't getting the message
Issue Identification:
Although our investigation is not complete, we’d like to share some initial insight into what we’ve uncovered:
Data writing size & speed: It was discovered that some devices are having trouble accepting the recovery image data being flashed. The blocks of data were too large for some devices to handle, and the memory on the device was having trouble with the speed at which the data was being written. In short, devices were getting too much data, too quickly. This would cause the failure as the new software is corrupted.
Small portion of 520/521 devices affected: As we reviewed logs and worked through issue reproduction, we identified the subset of affected 520/521 devices that may encounter this issue. There is no direct way for an end-user to check their device unfortunately, however it is positive news that not all units would experience this issue.
Click to expand...
Click to collapse
janjuaalpha said:
my lumia 520 is bricked after flash of android but is vibrating and and connecting to pc but showing android in device managment. any solutions?
not detected by cmd or windows device recovery tool.
Click to expand...
Click to collapse
Hi I solve it by installing the Compositive ADB interface driver manually, after this the uefi2lk.cmd detects it and completes the installation of twrp .... the bad thing is that there is still no solution for the micro sd, the chip reading , and the camera and the installation of google play services would be excellent if this could be solved at the moment the only thing I have for solution is to return the movila windows thanks to the help :crying::crying::good:
kristiano646 said:
Hi I solve it by installing the Compositive ADB interface driver manually, after this the uefi2lk.cmd detects it and completes the installation of twrp .... the bad thing is that there is still no solution for the micro sd, the chip reading , and the camera and the installation of google play services would be excellent if this could be solved at the moment the only thing I have for solution is to return the movila windows thanks to the help :crying::crying::good:
Click to expand...
Click to collapse
could you please provide me with the drivers? i cant make uefi2lk ro recognize my phone
Ryonic said:
Do you flash the rom yet?, or just install bootloader and recovery?
If your device get bricked after run the uefi2lk.cmd , tell me and i will show you the way to fix it
P/s : Sorry about my bad english skill
Click to expand...
Click to collapse
Hello. My device bricked after run uefi2lk.cmd and don't detecting with any key combinations. I have backup. Please,help me.
thinhx2 said:
You phong is working,just need flash recovery
Click to expand...
Click to collapse
How to do it?
---------- Post added at 02:43 AM ---------- Previous post was at 02:36 AM ----------
Ryonic said:
Do you flash the rom yet?, or just install bootloader and recovery?
If your device get bricked after run the uefi2lk.cmd , tell me and i will show you the way to fix it
P/s : Sorry about my bad english skill
Click to expand...
Click to collapse
What to do?
thinhx2 said:
You phong is working,just need flash recovery
Click to expand...
Click to collapse
hi, i also having similar issue but in my case i have run uefi2lk.cmd command and after that my phone was bricked......
it only shows android in device manager but can not be detected by windows devide recovery tool or cmd......
will you please let me know the solution in detail as i am a beginner in that kind of works....
adityachoudhary368 said:
hi, i also having similar issue but in my case i have run uefi2lk.cmd command and after that my phone was bricked......
it only shows android in device manager but can not be detected by windows devide recovery tool or cmd......
will you please let me know the solution in detail as i am a beginner in that kind of works....
Click to expand...
Click to collapse
Use fastboot,flash twrp for it,install android
My device is stuck in a boot loop on the first load of Lineage OS 13, nothing on my computer can pick up the phone so I can't fastboot or anything like that. I'm a bit stumped, does anyone have any insight?