Related
Today (03312011) we've fixed a corrupted sdcard for real!
On your Phone:
1. parted /dev/block/mmcblk0
2. print and write down
3. delete all partitions
4. recreate partitions (see point 2)
5. format mmcblk0p1 with vfat
6. format mmcblk0p2 with ext4 (example: mke2fs -q -L data -b 4096 -m 0 -F /dev/block/mmcblk0p2)
7. reboot
Done on CyanogenMod 7.
Code:
* daemon not running. starting it now *
* daemon started successfully *
~ # umount /dev/block/mmcblk0p1
umount /dev/block/mmcblk0p1
umount: can't umount /dev/block/mmcblk0p1: Invalid argument
~ # umount /dev/block/mmcblk0p1
umount /dev/block/mmcblk0p1
umount: can't umount /dev/block/mmcblk0p1: Invalid argument
~ # umount /dev/block/mmcblk0
umount /dev/block/mmcblk0
umount: can't umount /dev/block/mmcblk0: Invalid argument
~ # fdisk -l /dev/block/mmcblk0
fdisk -l /dev/block/mmcblk0
fdisk: can't open '/dev/block/mmcblk0': I/O error
~ # umount /dev/block/mmcblk0p1
umount /dev/block/mmcblk0p1
umount: can't umount /dev/block/mmcblk0p1: Invalid argument
~ #
:/
halp!
edit: I can manage to navigate the phone, i just cant execute some of these commands....
Nice job...now..someone with a i9000m and bad internal SD needs to try this to see if it fixes the issue...if so...we found our solution!
I have the corrupted SD card. Can't access from Android but I can mount it in ADB and all the files are there.
When I try this:
echo /dev/block/mmcblk0 > /sys/devices/platform/s3c-usbgadget/gadget/lun1/file
or this:
$ dd if=/dev/zero of=/dev/mmcblk0p1
dd if=/dev/zero of=/dev/mmcblk0p1
dd: can't open '/dev/mmcblk0p1': Permission denied
I get permission denied...
Any other ideas?
risqu3 said:
Code:
* daemon not running. starting it now *
* daemon started successfully *
~ # umount /dev/block/mmcblk0p1
umount /dev/block/mmcblk0p1
umount: can't umount /dev/block/mmcblk0p1: Invalid argument
~ # umount /dev/block/mmcblk0p1
umount /dev/block/mmcblk0p1
umount: can't umount /dev/block/mmcblk0p1: Invalid argument
~ # umount /dev/block/mmcblk0
umount /dev/block/mmcblk0
umount: can't umount /dev/block/mmcblk0: Invalid argument
~ # fdisk -l /dev/block/mmcblk0
fdisk -l /dev/block/mmcblk0
fdisk: can't open '/dev/block/mmcblk0': I/O error
~ # umount /dev/block/mmcblk0p1
umount /dev/block/mmcblk0p1
umount: can't umount /dev/block/mmcblk0p1: Invalid argument
~ #
:/
halp!
edit: I can manage to navigate the phone, i just cant execute some of these commands....
Click to expand...
Click to collapse
Looks like those devices aren't mounted, so you can't umount them.
type 'mount' to see a list of already mounted devices.
If the devices aren't mounted then you can skip onto the next step.
biochemgod said:
I have the corrupted SD card. Can't access from Android but I can mount it in ADB and all the files are there.
When I try this:
echo /dev/block/mmcblk0 > /sys/devices/platform/s3c-usbgadget/gadget/lun1/file
or this:
$ dd if=/dev/zero of=/dev/mmcblk0p1
dd if=/dev/zero of=/dev/mmcblk0p1
dd: can't open '/dev/mmcblk0p1': Permission denied
I get permission denied...
Any other ideas?
Click to expand...
Click to collapse
You need to 'su' first.
OK, luckily I can still boot into Darkys ROM and su is there.
# dd if=/dev/zero of=/dev/mmcblk0p1
dd if=/dev/zero of=/dev/mmcblk0p1
/dev/mmcblk0p1: write error: No space left on device
349201+0 records in
349200+0 records out
178790400 bytes transferred in 22.746 secs (7860300 bytes/sec)
Is this error a problem?
OK, after: fat.format /dev/block/mmcblk0p1
"success to format"
damn, no change - still get the "damaged internal SD card" message.
must be some missing some mysterious Samsung-specific partition data. Can see the entire SD card through adb. Just can't mount it in Android.
Any other suggestions?
I did get the same problem a few weeks ago but after performing a format with in the settings menu it got fixed, will bookmark this thread though incase it happens again and regular format does not resolve it.
Code:
~ # mount /dev/block/mmcblk0p1
mount /dev/block/mmcblk0p1
mount: mounting /dev/block/mmcblk0p1 on /mnt/sdcard failed: I/O error
~ # fat.format /dev/block/mmcblk0p1
fat.format /dev/block/mmcblk0p1
Success to format
~ #
Still cant access it :/
risqu3 said:
Code:
~ # mount /dev/block/mmcblk0p1
mount /dev/block/mmcblk0p1
mount: mounting /dev/block/mmcblk0p1 on /mnt/sdcard failed: I/O error
~ # fat.format /dev/block/mmcblk0p1
fat.format /dev/block/mmcblk0p1
Success to format
~ #
Still cant access it :/
Click to expand...
Click to collapse
you should mount it via usb to your pc and format with windows.
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
1. Flash Kernel with ADB-Support while at Recovery: h t t p://w w w.multiupload.com/3SVI4OBTD9
2. Boot into Recovery
3. adb shell
4. umount /dev/block/mmcblk0p1
5. umount /dev/block/mmcblk0p2
6. echo /dev/block/mmcblk0 > /sys/devices/platform/s3c-usbgadget/gadget/lun1/file
7. In Windows simply right click the desired Device and format it. No Quickformat! Will take 2 Hours or more.#
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
theres no instruction which says "use fat.format"
Yeah but the problem is it cant umount because it returns
Code:
mount /dev/block/mmcblk0p1
mount: mounting /dev/block/mmcblk0p1 on /mnt/sdcard failed: I/O error
and
Code:
echo /dev/block/mmcblk0 > /sys/devices/platform/s3c-usbgadget/gadget/lun1/file
doesn't seem to do anything as it never shows up in windows...
i think my phone is just downright screwed
First post here, hi all.
I am also having an SD Card issue on my Bell galaxy s ( have no external SD cards installed, only the 16GB internal).
History:
I upgraded from 2.1 (downloaded OCLF from Market, installed Insanity 0.93 and then to 0.94 (which has sataloop set to null under advance lagfix menu) and all was working great).
Then i decided to flash: SO_zImage_opt_ext_root_JPM-JP6_V4_2_OC.zip kernel (found here: http://forum.xda-developers.com/showthread.php?t=811660 ) via Odin and on reboot, i could not get past the galaxy S screen (buttons would stay lit).
In the clockwork recovery screen i got the message:
E: can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk1p1)
No such file or directory
Error mounting /mnt/sdcard/!
Flashed to I9000UGJH2-PDA-Kernel-Bootloader-CL490514-Low.tar (stock ROM)
still unable to get past galaxy S screen (buttons would stay lit) and had the SD card error in recovery screen.
I ended up flashing with Eugene's Eugene_2E_JK2_Froyo.tar.md5 and pit 512 (did not check repartition)
and i am able to boot back into OS 2.2
However my SD card is showing blank or unrecognized format.
I have tried the steps in this thread and i am getting the following output in adb shell:
--------------------------------------------------------------
C:\Androidsdk\tools>adb shell
~ # fdisk -l /dev/block/mmcblk0
fdisk -l /dev/block/mmcblk0
fdisk: can't open '/dev/block/mmcblk0': I/O error
~ # fdisk -l /dev/block/mmcblk0p1
fdisk -l /dev/block/mmcblk0p1
fdisk: can't open '/dev/block/mmcblk0p1': I/O error
~ # dd if=/dev/zero of=/dev/mmcblk0p
dd if=/dev/zero of=/dev/mmcblk0p
dd: writing '/dev/mmcblk0p': No space left on device
1+0 records in
0+0 records out
0 bytes (0B) copied, 0.000192 seconds, 0B/s
~ # dd if=/dev/zero of=/dev/mmcblk0p1
dd if=/dev/zero of=/dev/mmcblk0p1
dd: writing '/dev/mmcblk0p1': No space left on device
310337+0 records in
310336+0 records out
158892032 bytes (151.5MB) copied, 5.072773 seconds, 29.9MB/s
~ # umount /dev/block/mmcblk0p1
umount /dev/block/mmcblk0p1
umount: can't umount /dev/block/mmcblk0p1: Invalid argument
~ # umount /dev/block/mmcblk0p2
umount /dev/block/mmcblk0p2
~ # dd if=/dev/zero of=/dev/mmcblk0p2
dd if=/dev/zero of=/dev/mmcblk0p2
dd: writing '/dev/mmcblk0p2': No space left on device
1+0 records in
0+0 records out
0 bytes (0B) copied, 0.000159 seconds, 0B/s
~ # fat.format /dev/block/mmcblk0p1
fat.format /dev/block/mmcblk0p1
[pil/tfs4_posix_file_nand.c:278]Fail to read !!!
tfs4_format() fails(-5)
can not format rfs
Fail to format
~ # fat.format /dev/block/mmcblk0p2
fat.format /dev/block/mmcblk0p2
[pil/tfs4_posix_file_nand.c:278]Fail to read !!!
tfs4_format() fails(-5)
can not format rfs
Fail to format
~ #
------------------------------------------------
In clockwork recovery menu when trying to format the SD card i get the message:
E: Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk1p1)
(no such file or directory)
Error mounting /mnt/sdcard/!
Skipping format...
Done.
I can see the drives in Windows 7, but when i right click the drive to attempt to format it from windows i get the message: Please insert a disk into drive.
I am currently running Eugene_2E_JK2_Froyo and i tried formatting the SD card from within the phone menu but nothing actually happens, the SD card shows 0.00B of available space, if i try to download a market app i get the message not enough space.
Any suggestions?
Thx in advance!
Get it for repair... No joke nothing can be done sd card is partially dead . I got the.same problem
Sent from my GT-P1000M using XDA App
~ # fdisk -l /dev/block/mmcblk0
fdisk -l /dev/block/mmcblk0
fdisk: can't open '/dev/block/mmcblk0': I/O error
I said "if partitiontable is ok go on".
Your partition table isn't ok.
-> Samsung support!
~ # fdisk -l /dev/block/mmcblk0
fdisk -l /dev/block/mmcblk0
fdisk: can't open '/dev/block/mmcblk0': I/O error
so I guess it's back to bell right?
Question about FDISK:
Seems like I need su to execute fdisk. Problem is I can only give su permission from Android. Except in Android, I can't mount the sd - I can only mount it from within CWM. Does fdisk require the sd to be mounted?
I can mount and navigate the sd card using CWM and from adb (when CWM is running) just fine and access the files.
Is there no way to repair the partition table?
I'd be willing to offer a bounty for this, and I'm sure others would as well.
TIA
For those who have "Internal SD Damaged" at boot and mount error in recovery.
Try flashing JPC with repartition using 512 pit.
I did just that to fix my damaged internal SD.
Thanks StoneRoses - tried this many times with no luck.
Will try again just for fun. (back shortly)
................
OK, done - same error as before:
E:Can't mount /dev/block/mmcblk0p1
(I/O error)
E:copy_dbdata_media:Can't mount SDCARD:
:-(
I had the "Can't mount SD Card" issue, i tried a number of different combinations of flashing about 5 different firmwares (with variations of repartitioning, and not, etc.).
Nothing worked for me, couldn't mount in adb either. I finally sent it back via Bell (I bought my phone outright from T-Booth, I'm not a bell customer at all, was using unlocked on Rogers). They sent it back for me, but I am waiting to hear that they either have it back, or I have to pay more to get it fixed... We will see!
My English is poor, so I only give the code, without more explanation.
code modiy from ownhere's data2ext
create 3rd ext4 partion for loopback device.
Please note '-o sync,commit=5',This will enhance the stability.
Code:
$BUSYBOX mknod /dev/loop0 b 7 0
$BUSYBOX losetup /dev/loop0 /dev/block/mmcblk3p3
$BUSYBOX mount -t ext4 -o sync,commit=5,barrier=1,nouser_xattr,errors=continue,noatime,nodiratime,nosuid,nodev /dev/loop0 /mnt/asec/extdata
you can turn off journal for speed：
Code:
/system/bin/tune2fs -O ^has_journal /dev/block/mmcblk3p3
Code:
busybox ls -lL /dev/loop*
brw------- 1 0 0 7, 0 Jan 9 19:17 /dev/loop0
brw------- 1 0 0 7, 1 Jan 9 19:17 /dev/loop1
brw------- 1 0 0 7, 2 Jan 9 19:17 /dev/loop2
brw------- 1 0 0 7, 3 Jan 9 19:17 /dev/loop3
brw------- 1 0 0 7, 4 Jan 9 19:17 /dev/loop4
brw------- 1 0 0 7, 5 Jan 9 19:17 /dev/loop5
brw------- 1 0 0 7, 6 Jan 9 19:17 /dev/loop6
brw------- 1 0 0 7, 7 Jan 9 19:17 /dev/loop7
Scoring won't be so high, but stability will increase a lot
Hi Chenglu, I've actually already tried to modify your original data2loop script to use ext4 and run it with a kernel with ext4 built in. It actually benchmarks great on first boot, somewhat better than the original ext2 data2loop version, but the tablet won't boot again, it crashes sometime during boot and I have to wipe data and restart.
Not sure if the sync,commit=5 options will make a difference - maybe I'll give that a try and see if it helps...
EDIT: No, it still pukes out on reboot, those options don't make a difference. I've attached my inandop.sh file here. If you diff this with yours, there are only a few changes, and I'm just not sure why it doesn't work. Any ideas?
Chenglu...
Thanks... this should help... but I am still very concerned with this approach..
Even though you are performing a sync you still can not guarantee that the data has been flushed out.. Flushing will depend on what other operations are in queue within the I/O sub system. In addition, right now you have a commit of every 5 seconds which honestly again leaves room for possible corruption. Again should help as this setting is meant for removable storage...
Lastly DO NOT turn off the Journal. yes it will speed up the file system BUT at a HUUGE risk of data loss in the event of unclean shutdown. This is your only fail safe that ensures filesystem consistency even across unclean shutdown.
Generally I agree with this approach for many situations but NOT your entire system partition or critical data partitions...
These devices are too portable with unreliable power sources (not the battery but the ability for it to reboot on its own and the ability for you to accidentally power it off)..
I for one am against this performance boost...
Chenglu said:
My English is poor, so I only give the code, without more explanation.
code modiy from ownhere's data2ext
create 3rd ext4 partion for loopback device.
Please note '-o sync,commit=5',This will enhance the stability.
Code:
$BUSYBOX mknod /dev/loop0 b 7 0
$BUSYBOX losetup /dev/loop0 /dev/block/mmcblk3p3
$BUSYBOX mount -t ext4 -o sync,commit=5,barrier=1,nouser_xattr,errors=continue,noatime,nodiratime,nosuid,nodev /dev/loop0 /mnt/asec/extdata
you can turn off journal for speed：
Code:
/system/bin/tune2fs -O ^has_journal /dev/block/mmcblk3p3
Code:
busybox ls -lL /dev/loop*
brw------- 1 0 0 7, 0 Jan 9 19:17 /dev/loop0
brw------- 1 0 0 7, 1 Jan 9 19:17 /dev/loop1
brw------- 1 0 0 7, 2 Jan 9 19:17 /dev/loop2
brw------- 1 0 0 7, 3 Jan 9 19:17 /dev/loop3
brw------- 1 0 0 7, 4 Jan 9 19:17 /dev/loop4
brw------- 1 0 0 7, 5 Jan 9 19:17 /dev/loop5
brw------- 1 0 0 7, 6 Jan 9 19:17 /dev/loop6
brw------- 1 0 0 7, 7 Jan 9 19:17 /dev/loop7
Click to expand...
Click to collapse
Fast internal storage and ext4 partion is the fundamental solution.
loopback device In some respects have an advantage.
I dont dispute the performance gain... but at a risk. Everyone should be aware of this and accept the risk... If you do then thats fine...
I guess I'm more conservative when it comes to my data.
Chenglu said:
Fast internal storage and ext4 partion is the fundamental solution.
loopback device In some respects have an advantage.
Click to expand...
Click to collapse
rcgabriel said:
Hi Chenglu, I've actually already tried to modify your original data2loop script to use ext4 and run it with a kernel with ext4 built in. It actually benchmarks great on first boot, somewhat better than the original ext2 data2loop version, but the tablet won't boot again, it crashes sometime during boot and I have to wipe data and restart.
Not sure if the sync,commit=5 options will make a difference - maybe I'll give that a try and see if it helps...
EDIT: No, it still pukes out on reboot, those options don't make a difference. I've attached my inandop.sh file here. If you diff this with yours, there are only a few changes, and I'm just not sure why it doesn't work. Any ideas?
Click to expand...
Click to collapse
your busybox support ext4?
Chenglu said:
your busybox support ext4?
Click to expand...
Click to collapse
good point, that was a mistake. I am now using a statically compiled version of mkfs.ext4 that seems to work. Mount doesn't need explicit ext4 support in busybox, should just work. And I think I'm using a version of fsck that supports ext4.
EDIT: Okay, I'm using mkfs.ext4 which I've tested from the command line and it is clearly making a real ext4 filesystem. Also using a version of es2fsck that ought to work with ext4. These are both from the Desire forums, but seem to be generic ARM binaries so they seem to run on our G Tablet.
Still same result - works on first boot, not thereafter.
Maybe I need to use a version of busybox that explicitly supports ext4? Trying that next.
BTW, I got the binaries I'm using from the data2ext.zip file here: http://forum.xda-developers.com/showthread.php?t=859419
Also - ownhere's script looks pretty badass. We should consider using something based on that.
EDIT2: I am using busybox, mkfs.ext4 and e2fsck from the Desire forums, so it should support ext4 fully. Nonetheless, the exact same screen flicker followed by screen shutting off occurs with this. Attached is my updated inandop.sh. This is just baffling.
rcgabriel said:
good point, that was a mistake. I am now using a statically compiled version of mkfs.ext4 that seems to work. Mount doesn't need explicit ext4 support in busybox, should just work. And I think I'm using a version of fsck that supports ext4.
EDIT: Okay, I'm using mkfs.ext4 which I've tested from the command line and it is clearly making a real ext4 filesystem. Also using a version of es2fsck that ought to work with ext4. These are both from the Desire forums, but seem to be generic ARM binaries so they seem to run on our G Tablet.
Still same result - works on first boot, not thereafter.
Maybe I need to use a version of busybox that explicitly supports ext4? Trying that next.
BTW, I got the binaries I'm using from the data2ext.zip file here: http://forum.xda-developers.com/showthread.php?t=859419
Also - ownhere's script looks pretty badass. We should consider using something based on that.
EDIT2: I am using busybox, mkfs.ext4 and e2fsck from the Desire forums, so it should support ext4 fully. Nonetheless, the exact same screen flicker followed by screen shutting off occurs with this. Attached is my updated inandop.sh. This is just baffling.
Click to expand...
Click to collapse
I'm working on this as well...
Took a look at your script. It looks like you've put everything (including busybox) into /system/bin instead of /system/xbin? Your environment variable for busybox shows /system/bin...
Just wanted to confirm...
rcgabriel said:
EDIT2: I am using busybox, mkfs.ext4 and e2fsck from the Desire forums, so it should support ext4 fully. Nonetheless, the exact same screen flicker followed by screen shutting off occurs with this. Attached is my updated inandop.sh. This is just baffling.
Click to expand...
Click to collapse
I'm unable to get the loop file to mount as ext4 with ADB after it fails...
I'm not sure if/why it actually mounted in the first place, but I'm thinking this is a kernel issue. Are you positive that your kernel supports ext4? Also, I'm thinking ext4 might need to be compiled into the kernel instead of a module.
I could be wrong, though....
Also check which mount binary you are using. Busybox has one, but there is also a "mount" sometimes linked to the "toolbox" binary in /system/bin.
Ok so I (sort of) got it working.
After getting a kernel that is known working with ext4, the system was able to mount the partition again. I was getting the vegan "loop", so I went in with ADB and saw that the partition was mounted but all of the files were gone.
I then booted into CW and mounted USB, and at the same time on my PC I extracted my /data/data folder from a recent clockwork backup and copied it to /sdcard. I then unmounted USB and mounted /system and /sdcard from CW. Then from ADB I copied the data folder over to /mnt/asec/extdata and fixed the perms. I created empty folders for app-private and anr because they were empty on my backup (other than a traces.txt file in anr).
After bouncing the tab it booted up, but some of my settings were blown away. No big deal. Quadrant crashes at the I/O test part, but it might be because I don't have an Internet connection. The wifi is broken with the kernel I'm using.
Let me know if you still can't get things mounted. I'll test this more tomorrow when I get a fixed kernel.
I'm going to start working on the alternate approach of adding a 3rd partition...
anlog said:
Ok so I (sort of) got it working.
After getting a kernel that is known working with ext4, the system was able to mount the partition again. I was getting the vegan "loop", so I went in with ADB and saw that the partition was mounted but all of the files were gone.
I then booted into CW and mounted USB, and at the same time on my PC I extracted my /data/data folder from a recent clockwork backup and copied it to /sdcard. I then unmounted USB and mounted /system and /sdcard from CW. Then from ADB I copied the data folder over to /mnt/asec/extdata and fixed the perms. I created empty folders for app-private and anr because they were empty on my backup (other than a traces.txt file in anr).
After bouncing the tab it booted up, but some of my settings were blown away. No big deal. Quadrant crashes at the I/O test part, but it might be because I don't have an Internet connection. The wifi is broken with the kernel I'm using.
Let me know if you still can't get things mounted. I'll test this more tomorrow when I get a fixed kernel.
I'm going to start working on the alternate approach of adding a 3rd partition...
Click to expand...
Click to collapse
The kernel should support ext4, I built it myself with ext4 enabled in the config file. And yeah, I put the busybox executable in /system/bin so it wouldn't conflict with the one in /system/xbin that Vegan already has. I also dumped mkfs.ext4 in /system/bin.
What I realized is that busybox has a nasty habit of failing partially at doing things - I keep assuming that it's exactly like the stock Linux command line tools, and it's not always identical. I ended up tearing out the important stuff and running it as a standalone test script from the command line to see what was happening.
Mkfs.ext4 runs with no obvious issues (I see it creates a journal at the end, so I know it's creating an ext4 filesystem now).
But then I got an error:
Code:
mount: mounting /dev/loop0 on /mnt/asec/extdata failed: Invalid argument
followed by:
Code:
umount: can't umount /mnt/asec/extdata: Invalid argument
e2fsck 1.41.6 (30-May-2009)
ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /data/ext4 is mounted.
/system/bin/e2fsck: Superblock invalid, trying backup blocks...
/system/bin/e2fsck: Bad magic number in super-block while trying to open /data/ext4
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
mount: mounting /dev/loop0 on /mnt/asec/extdata failed: Invalid argument
So mount failed to mount the file device that was created - that would seem to be a big issue. And then e2fsck failed to fsck it that one I'm baffled by.
I don't really understand how this "partially works" when it runs from inandop.sh but seems to fail entirely when I run it from the command line, but I sense that it "works once" because something it's getting sometimes written as ext4 sometimes as ext2/3 and that's leading obviously to corruption. Will figure more out later when I have time. I may just try adapting ownhere's script directly, he's obviously put a ton of thought into filesystem stuff and I'm not an expert in that area at all.
rcgabriel said:
The kernel should support ext4, I built it myself with ext4 enabled in the config file. And yeah, I put the busybox executable in /system/bin so it wouldn't conflict with the one in /system/xbin that Vegan already has. I also dumped mkfs.ext4 in /system/bin.
What I realized is that busybox has a nasty habit of failing partially at doing things - I keep assuming that it's exactly like the stock Linux command line tools, and it's not always identical. I ended up tearing out the important stuff and running it as a standalone test script from the command line to see what was happening.
Mkfs.ext4 runs with no obvious issues (I see it creates a journal at the end, so I know it's creating an ext4 filesystem now).
But then I got an error:
Code:
mount: mounting /dev/loop0 on /mnt/asec/extdata failed: Invalid argument
followed by:
Code:
umount: can't umount /mnt/asec/extdata: Invalid argument
e2fsck 1.41.6 (30-May-2009)
ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /data/ext4 is mounted.
/system/bin/e2fsck: Superblock invalid, trying backup blocks...
/system/bin/e2fsck: Bad magic number in super-block while trying to open /data/ext4
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
mount: mounting /dev/loop0 on /mnt/asec/extdata failed: Invalid argument
So mount failed to mount the file device that was created - that would seem to be a big issue. And then e2fsck failed to fsck it that one I'm baffled by.
I don't really understand how this "partially works" when it runs from inandop.sh but seems to fail entirely when I run it from the command line, but I sense that it "works once" because something it's getting sometimes written as ext4 sometimes as ext2/3 and that's leading obviously to corruption. Will figure more out later when I have time. I may just try adapting ownhere's script directly, he's obviously put a ton of thought into filesystem stuff and I'm not an expert in that area at all.
Click to expand...
Click to collapse
I was able to reboot 5 times and it kept the settings for me. I just couldnt test all apps because wifi was broken with the kernel I was using. I can test more today.
Are you sure that your ext4 format is completing? I got an mtab error when first trying to create the journal, so I just changed the script to format it with the -O ^has_journal option and it competed.
Vegan runs fine for me with latest busybox...
modify init.rc for mount ext4 /data
you must have tune2fs mkfs.ext4 e2fsck binary file.
Code:
#!/system/bin/sh
##get highest priority
/system/bin/renice -20 -r -g $$
ECHO_TARGET=/misc/inandop.log
BUSYBOX="/system/bin/busybox"
#data2loop by xiaolu
echo "try data2loop" >> $ECHO_TARGET
if [ "`$BUSYBOX df /dev/loop0 | grep loop`" != "" } ; then
exit 0
fi
$BUSYBOX ln -s /dev/block/loop0 /dev/loop0
$BUSYBOX ln -s /dev/block/loop1 /dev/loop1
$BUSYBOX ln -s /dev/block/loop2 /dev/loop2
$BUSYBOX ln -s /dev/block/loop3 /dev/loop3
$BUSYBOX ln -s /dev/block/loop4 /dev/loop4
$BUSYBOX ln -s /dev/block/loop5 /dev/loop5
$BUSYBOX ln -s /dev/block/loop6 /dev/loop6
$BUSYBOX ln -s /dev/block/loop7 /dev/loop7
if [ ! -e /data/system.firstrun.finish ];
then
# first run data not create do nothing, data2loop after reboot
#/system/bin/mkfs.ext4 -b 4096 -m 0 -F -L userdata /dev/block/mmcblk3p2
#/system/bin/tune2fs -o journal_data_writeback /dev/block/mmcblk3p2
#/system/bin/e2fsck /dev/block/mmcblk3p2
#/system/bin/tune2fs -O ^has_journal /dev/block/mmcblk3p2
$BUSYBOX mkdir /data/anr
$BUSYBOX touch /data/system.firstrun.finish
exit 0;
fi
$BUSYBOX umount /cache
echo "0" > /data/misc/screen_lock_status
$BUSYBOX chown 1000.1000 /data/misc/screen_lock_status
$BUSYBOX chmod 644 /data/misc/screen_lock_status
$BUSYBOX mkdir /mnt/asec/extdata
/system/bin/tune2fs -o journal_data_writeback /dev/block/mmcblk3p2
$BUSYBOX mount -t ext4 -o remount,barrier=0,nobh,nouser_xattr,errors=continue,noatime,nodiratime,nosuid,nodev /dev/block/mmcblk3p2 /data
result=$?
echo "mount mmcblk3p2:$result" >> $ECHO_TARGET
$BUSYBOX chown 1000.1000 /data
$BUSYBOX chmod 771 /data
echo "+++Need create loopback device for data, please wait... " >> $ECHO_TARGET
if [ ! -e /data/data2loop.finish ];
then
if [ -e /dev/block/mmcblk3p3 ];
then
echo "+++Found mmcblk3p3, will use it for /data/data, create ext4 fs on it now..." >> $ECHO_TARGET
/system/bin/mkfs.ext4 -b 4096 -m 0 -F -L extdata /dev/block/mmcblk3p3
/system/bin/tune2fs -o journal_data_ordered /dev/block/mmcblk3p3
/system/bin/e2fsck -y -v -f /dev/block/mmcblk3p3
#/system/bin/tune2fs -O has_journal /dev/block/mmcblk3p3
/system/bin/tune2fs -O ^has_journal /dev/block/mmcblk3p3
$BUSYBOX mount -t ext4 -o loop,commit=5,barrier=1,nouser_xattr,errors=continue,noatime,nodiratime,nosuid,nodev /dev/block/mmcblk3p3 /mnt/asec/extdata
result=$?
echo "mount /dev/block/mmcblk3p3:$result" >> $ECHO_TARGET
else
echo "+++Need create 512M ext2 loopback device for data, please wait... " >> $ECHO_TARGET
$BUSYBOX dd if=/dev/zero of=/data/ext2 bs=1048576 count=512
$BUSYBOX mke2fs -m 0 -F -L datadata /data/ext2
echo "+++Loopback device create done... " >> $ECHO_TARGET
$BUSYBOX mount -o loop,errors=continue,noatime,nodiratime,nosuid,nodev /data/ext2 /mnt/asec/extdata
fi
$BUSYBOX chown 1000.1000 /mnt/asec/extdata
$BUSYBOX chmod 771 /mnt/asec/extdata
for i in data app-private anr ; do
if [ ! -d /mnt/asec/extdata/$i ] ; then
$BUSYBOX mkdir /mnt/asec/extdata/$i;
fi
$BUSYBOX chown 1000.1000 /mnt/asec/extdata/$i;
$BUSYBOX chmod 771 /mnt/asec/extdata/$i;
#if [ ! -h /data/$i ] ; then
$BUSYBOX cp -a /data/$i /mnt/asec/extdata/;
$BUSYBOX rm -rf /data/$i;
$BUSYBOX ln -s /mnt/asec/extdata/$i /data/$i;
result=$?
echo "ln -s:$result" >> $ECHO_TARGET
#fi
done
$BUSYBOX umount /mnt/asec/extdata
$BUSYBOX touch /data/data2loop.finish
fi
if [ -e /dev/block/mmcblk3p3 ];
then
/system/bin/e2fsck -y -v -f /dev/block/mmcblk3p3
#/system/bin/tune2fs -O ^has_journal /dev/block/mmcblk3p3
/system/bin/tune2fs -o journal_data_writeback /dev/block/mmcblk3p3
$BUSYBOX mknod /dev/loop0 b 7 0
$BUSYBOX losetup /dev/loop0 /dev/block/mmcblk3p3
#$BUSYBOX mount -t ext4 -o sync,commit=5,barrier=1,nouser_xattr,errors=continue,noatime,nodiratime,nosuid,nodev /dev/loop0 /mnt/asec/extdata
$BUSYBOX mount -t ext4 -o barrier=1,nouser_xattr,errors=continue,noatime,nodiratime,nosuid,nodev /dev/loop0 /mnt/asec/extdata
result=$?
echo "mount /dev/loop1:$result" >> $ECHO_TARGET
else
/system/bin/e2fsck -y -v -f /data/ext2
$BUSYBOX mount -o loop,errors=continue,noatime,nodiratime,nosuid,nodev /data/ext2 /mnt/asec/extdata
fi
$BUSYBOX chown 1000.1000 /mnt/asec/extdata
$BUSYBOX chmod 771 /mnt/asec/extdata
$BUSYBOX mkdir /data/cache
$BUSYBOX mount -o bind /data/cache /cache
$BUSYBOX chmod 777 /cache
sync;
exit 0;
Code:
rootfs / rootfs rw,relatime 0 0
tmpfs /dev tmpfs rw,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/dev/block/mtdblock3 /system yaffs2 ro,relatime 0 0
/dev/block/mtdblock6 /logodata yaffs2 rw,nosuid,nodev,relatime 0 0
/dev/block/mmcblk3p2 /data ext4 rw,nosuid,nodev,noatime,nodiratime,barrier=0,nobh,data=writeback 0 0
/dev/block/mtdblock0 /misc yaffs2 rw,nosuid,nodev,relatime 0 0
/dev/loop0 /mnt/asec/extdata ext4 rw,nosuid,nodev,noatime,nodiratime,barrier=0,data=writeback 0 0
/dev/block/mmcblk3p2 /cache ext4 rw,nosuid,nodev,noatime,nodiratime,barrier=0,nobh,data=writeback 0 0
/dev/block/vold/179:17 /mnt/sdcard2 vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=07
02,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/vold/179:17 /mnt/secure/asec vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmas
k=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
tmpfs /mnt/sdcard2/.android_secure tmpfs ro,relatime,size=0k,mode=000 0 0
/dev/block/vold/179:25 /mnt/sdcard vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=070
2,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/vold/179:25 /mnt/secure/asec vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmas
k=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
tmpfs /mnt/sdcard/.android_secure tmpfs ro,relatime,size=0k,mode=000 0 0
chenglu can you post the instructions on how to create a third partition and mount that instead of creating a loop file? I want to test that today.
Thanks,
anlog said:
chenglu can you post the instructions on how to create a third partition and mount that instead of creating a loop file? I want to test that today.
Thanks,
Click to expand...
Click to collapse
Code:
busybox fdisk /dev/block/mmcblk3 -l
Disk /dev/block/mmcblk3: 16.0 GB, 16097738752 bytes
4 heads, 16 sectors/track, 491264 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Device Boot Start End Blocks Id System
/dev/block/mmcblk3p1 1 397087 12706776 83 Linux
/dev/block/mmcblk3p2 397088 458497 1965120 83 Linux
/dev/block/mmcblk3p3 458498 491264 1048544 83 Linux
reboot into recovery mode
Code:
busybox fdisk /dev/block/mmcblk3
The number of cylinders for this disk is set to 491264.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): m
m
Command Action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
"d" delete a partition 1 and 2
"n" create primary partition 1 2 3
busybox mkdosfs /dev/block/mmcblk3p1
mkfs.ext4 -b 4096 -m 0 -F -L userdata /dev/block/mmcblk3p2
In your instructions it looks like partition 3 isn't referenced, but instead you're formatting /data as ext4 instead of ext3? Or am I missing something???
Add the -O ^huge_file file option to your mkfs.ext4 when formating the partition. (it won't work with this feature since it requires special kernel option that brakes compatibility with existing modules)
mkfs.ext4 -O ^huge_file ........
Report back...
anlog said:
I was able to reboot 5 times and it kept the settings for me. I just couldnt test all apps because wifi was broken with the kernel I was using. I can test more today.
Are you sure that your ext4 format is completing? I got an mtab error when first trying to create the journal, so I just changed the script to format it with the -O ^has_journal option and it competed.
Vegan runs fine for me with latest busybox...
Click to expand...
Click to collapse
I've seen a lot of threads detailing how to create an Ext4 partition using Gparted but if you don't want to download the image and would rather do it all on your phone, here's how:
This entire procedure should take less than 5min so you can go back to messing with your phone in other ways.
REQUIRES:
CLOCKWORK MOD RECOVERY
ADB
FINGERS
I am not responsible for any damage done to your phone doing this process. =.=
1. Download the zip file provided.
2. Extract the zip file to the same folder you have ADB in. (You should now have a folder named ext4 in the same folder you have ADB)
3. Reboot the phone into MAGDLR. Then select the option to boot into the recovery.
4. Make sure that /system/ is mounted using the option to mount partition in Clockwork Recovery.
5. Open a command (cmd) prompt and cd into your folder with ADB.
6. Run these commands in the command prompt. (Commands are in BOLD)
adb push ext4 /system/etc/
adb shell
parted /dev/block/mmcblk0
print (make note of the total size of your partition here)
resize 1 0 xxxx (where xxxx is the size you want for your FAT32 partition. It should equal total size of your partition that you gleaned from print minus 1024 for the ext4 partition you're about to set up)
mkpartfs primary ext2 xxxx yyyy (where xxxx is where your previous partition ended and yyyy is the total size of your sdcard)
.... (Let it do its thing. Shouldn't take more than a minute)
print (Make sure that everything is correct: You have a fat32 partition running from 0 to xxxx and an ext2 partition running from xxxx to the total size of your partition)
quit
Now to utilize the two files we previously pushed to /system/etc/
chmod 777 /system/etc/tune2fs
chmod 777 /system/etc/e2fsck
/system/etc/tune2fs -j /dev/block/mmcblk0p2 <- You now have ext3
/system/etc/tune2fs -O extents,uninit_bg,dir_index /dev/block/mmcblk0p2 (Note: CAsE SEnSitiVE)
/system/etc/e2fsck -fpDC0 /dev/block/mmcblk0p2 (Note: CAsE SEnSitiVE) <- You now have ext4
7. You can check that it's truly ext4 by:
parted /dev/block/mmcblk0
print (It should now read that you have a FAT32 and an ext4 partition.)
quit
You're all done! Now you have a 1GB ext4 partition for all your data and apps. If you know what you're doing, these same steps can be modified so that you have two ext4 partitions if you'd like. You can also alter the size of your ext4 partition to something smaller if you don't have that many apps to install or have a smaller SDcard (512MB should be sufficient in most cases, 1GB is slightly overkill IMO)
i will try with my HD2. I need more space to install app on sd not on phone. Thanks so much
Hi, I follow your instruction but when I get a "Permision deined" error when I type in the following commond
/system/etc/tune2fs -j /dev/block/mmcblk0p2
Can you please help?
Many many thanks!!
justj said:
Hi, I follow your instruction but when I get a "Permision deined" error when I type in the following commond
/system/etc/tune2fs -j /dev/block/mmcblk0p2
Can you please help?
Many many thanks!!
Click to expand...
Click to collapse
Crap. I forgot a step. You have to type
chmod 777 /system/etc/tune2fs
chmod 777 /system/etc/e2fsck
prior to using those files. That should fix the permission denied error.
I've edited the OP to reflect the changes, thanks for pointing that out.
Thanks man
Thanks Bro I have successfully make ext4 and I am enjoying my new Rom
Using HTC Desire runnymede 5.0
Amazing. I will keep it for future reference, although I partitioned my SD with CWM recovery and Gparted.
What kind of partition is made when using CWM? I made a 1GB partition on my card that way, and it works great. But I've heard good things about having it as ext4. How does this guide reflect the fact that I already have an SD-EXT on my card that's not necessarily ext4?
Thanks!
please help
please help me i cant get it to work... its same with /system mounted and unmounted...not even one 3rd app is working for me on my win 7 64x when i want to create ext4 this is my last hope. card is brand new 8gb ultra speed its working fine so cant be problem there. it seems like chmod 777 will delete that file..
Code:
C:\Users\OgziR\Desktop\adt-bundle-windows-x86_64-20130522\sdk\platform-tools>adb
push ext4 /system/etc/
push: ext4/tune2fs -> /system/etc/tune2fs
push: ext4/e2fsck -> /system/etc/e2fsck
2 files pushed. 0 files skipped.
1573 KB/s (603400 bytes in 0.374s)
C:\Users\OgziR\Desktop\adt-bundle-windows-x86_64-20130522\sdk\platform-tools>adb
shell
~ # /system/etc/tune2fs -j /dev/block/mmcblk0p2
/system/etc/tune2fs -j /dev/block/mmcblk0p2
/sbin/sh: /system/etc/tune2fs: Permission denied
~ # chmod 777 /system/etc/tune2fs
chmod 777 /system/etc/tune2fs
~ # /system/etc/tune2fs -j /dev/block/mmcblk0p2
/system/etc/tune2fs -j /dev/block/mmcblk0p2
/sbin/sh: /system/etc/tune2fs: not found
~ #
Hye... I have 2 question...
My phone is a HTC HD2 running an NexusHD2.ICS.CM9.HWA.V2.3 ROM... The cmd prompt cant seem so fine my device. Do have any advice on this???
Secondly, what do i do with the ext4.zip file??? I mean, do it extract it, or put in same folder with ADB??
Btw, i am Super Noob on this, so i apologize if my question offends anyone... 1000 apologizes...
OK, first of all, do you have adb installed correctly? If cmd prompt can't find your device that is the most likely problem.
As for what to do with ext4.zip, you need to extract it to your adb folder.
Sent from my Vivid 4G using xda app-developers app
>>> Please note that Vashiru reworked this guide for reliability and alternate values, so I recommend you check his various posts in this thread starting with this one. <<<
Click to expand...
Click to collapse
THE PROBLEM
As many of us have noticed, it is fairly easy to get an "Out of space" message when installing apps on our phones because, for some weird reason, Oppo decided that the storage part of the device should linger in the dark ages, when /userdata and /sdcard were separate partitions and you only had 2GB of data storage, even if your phone was a 32GB model.
Now, imagine that you are running KitKat and would like to try ART. This may be a bad idea as, if your data partition is more than 30% full, you will find that while converting your apps to this new format, Android will run out of space.
At OppoForums, a few bright people started looking into the issue and, of course, there is a way to improve the situation.
WARNING!
If you follow the steps below correctly, you should not run in any trouble. If you do not, however, you may end up spending much more time fixing your phone.
FIRST, THE THANKS SECTION
Anders tinkered with his device’s partition table until he got to where he had grown the /userdata partition to something useable. Yes, it’s some people’s definition of “play”
Jousa11 is the first person trying to put a guide together explaining the steps to reproduce Anders’ work. WARNING: I did no get to see said guide as Jousa quickly deleted it due to the risks involved. So, take that in account!
Rockman for providing the last resort rescue tools in case you brick your phone
Lucky for providing the WiFi fix
Please let me know if you are not on this list and I forgot to give you credit!
YOU WILL NEED
The hardware:
An Oppo Find5 phone(!)
A computer (Windows/Linux/Mac) with adb installed and working
A USB cable
On your computer:
adb
[Optional] fastboot
On your phone (SDCard):
parted + mke2fs + tune2fs
mmcblk0p21_persist_ext4.img
openrecovery-twrp-2.6.3.0-find5-TP-patch.img
[Optional] gdisk
You will use parted to work on your partition table; mke2fs and tune2fs to create ext4 filesystems on some of these partitions (parted does not know how to create ext4 partitions)
mmcblk0p21_persist_ext4.img is an image that you need to restore your /persist partition and avoid issues such as non-working WiFi.
openrecovery-twrp-2.6.3.0-find5-TP-patch.img is a patched recovery image. I know: you already have a recovery image if you are going through these steps. However, we are going to wipe it so you want to install this guy before rebooting. Note that if you forget, you can always flash it later using fastboot.
On your computer:
adb to access your phone recovery, push files to SDCard, reboot...
[Optional] fastboot. You will only need fastboot if you mess up your recovery partition.
WHAT IF SOMETHING GOES AWFULLY WRONG?
You may “brick” your phone. Apparently it’s near impossible to hard brick your Find5, though. See below.
First, Anders recommends making a backup of your partition table. I didn’t because I felt that if I messed something up, it would be a partitions’ content rather than the partition table but that’s not the wisest approach.
Furthermore, if you are really worried about what stilly error your fat fingers will cause (I know I should be!) you can also backup your partitions.
Backing up your partition table:
On your phone:
Code:
gdisk -b /sdcard/gpt.bin /dev/block/mmcblk0
Backing up a single partition:
On your phone:
Code:
dd if=/dev/block/mmcblk0p<partition id> of=/sdcard/backup-<partition id>.bin
On your computer:
Code:
adb pull /sdcard/gpt.bin
adb pull /sdcard/backup-<partition id>.bin
LAST RESORT
OK. So, you've bricked your phone. Now what?
First, you will need Windows. So if you're on a Mac or Linux and have no access to a Windows machine/VM, er..don't brick your phone.
- Download drivers and tools
- Download and follow the instructions
READY ? LET'S GET STARTED
>>>>>>>>>>>> First, Download The Files <<<<<<<<<<<<
Then...
On your computer:
UPDATE As dixxa pointed out, mke2fs and tune2fs may already be present on your device. It was not the case for me but you should check first; it seems like a good idea to use existing binaries.
Code:
adb reboot recovery
adb push parted /sbin
adb push mke2fs /sbin
adb push tune2fs /sbin
On your phone:
Code:
chmod 755 /sbin/parted /sbin/mke2fs /sbin/tune2fs
umount /cache
umount /sdcard
umount /emmc
umount /data
parted /dev/block/mmcblk0
You are now in the parted shell.
CAREFUL! Do not delete any partition below 20 or you will enter "Big Oops" territory. I recommend typing carefully and, yes, staying away from copy/paste operations that may swallow a character like, say, the '2' in '20'
Note that the size value I am using here is '4GB' for /userdata (rather than 2GB). I guess you could make /userdata bigger than 4GB, in which case you would have to recompute all the offsets in the commands below(!)
Code:
# rm sdcard
rm 29
# 28 thru 23 are reserved
rm 28
rm 27
rm 26
rm 25
# rm recovery
rm 24
# rm misc
rm 23
# rm cache
rm 22
# rm persist
rm 21
# rm data/emmc
rm 20
# now, re-create partitions but data is bigger
mkpart primary 1325 5421
name 20 userdata
mkpart primary 5421 5430
name 21 persist
mkpart primary 5430 5967
name 22 cache
mkpart primary 5967 5968
name 23 misc
mkpart primary 5968 5979
name 24 recovery
mkpart primary 5979 6012
name 25 reserve1
mkpart primary 6012 6019
name 26 reserve2
mkpart primary 6019 6028
name 27 reserve3
mkpart primary 6028 6062
name 28 reserve4
mkpart primary 6062MB 100%
name 29 sdcard
# exit parted shell
q
Let's create a file system on the partitions that require one. Note that I am formatting the SDCard using VFAT as, yes, EXT4 is a better FS, but it is also incompatible with Oppo's ROM and some apps may not require the proper permissions etc.
Code:
# Notes:
# -m 0: no reserved blocks
# -c 0: no max mount count
# -C -1: no mount count
# -i -1: max_int interval between checks
mke2fs -t ext4 -m 0 -L userdata /dev/block/mmcblk0p20
tune2fs -c 0 -i -1 -C -1 /dev/block/mmcblk0p20
mke2fs -t ext4 -m 0 -L persist /dev/block/mmcblk0p21
tune2fs -c 0 -i -1 -C -1 /dev/block/mmcblk0p21
mke2fs -t ext4 -m 0 -L cache /dev/block/mmcblk0p22
tune2fs -c 0 -i -1 -C -1 /dev/block/mmcblk0p22
# Hey look it’s an ext4 SDCard!
mke2fs -t ext4 -m 0 -L sdcard /dev/block/mmcblk0p29
tune2fs -c 0 -i -1 -C -1 /dev/block/mmcblk0p29
# Actually to avoid errors like unable to write to root of sdcard:
mkdosfs -n sdcard -F 32 /dev/block/mmcblk0p29
mount -t vfat /dev/block/mmcblk0p29 /sdcard
At this point, we have clobbered the /persist partition and this could cause issues as mentioned earlier. Let's restore it.
Code:
# Restore /persist partition
mount -t ext4 /dev/block/mmcblk0p29 /sdcard
# On computer
adb push mmcblk0p21_persist_ext4.img /sdcard/
# On phone
dd if=mmcblk0p21_persist_ext4.img of=/dev/block/mmcblk0p21
IMPORTANT! Flash your recovery partition now. If you wait until after rebooting, you will need to use fastboot instead.
Code:
# Recovery partition: on computer
adb push openrecovery-twrp-2.6.3.0-find5-TP-patch.img /sdcard/
# On phone
dd if=openrecovery-twrp-2.6.3.0-find5-TP-patch.img of=/dev/block/mmcblk0p24
Admire your work
Code:
parted /dev/block/mmcblk0 print
Reboot into your new recovery and install your favorite ROM
FAQ
Q: Is this dangerous?
A: Yes. Yes, it is.
Q: Any tip?
A: Yes. Follow these instructions carefully and if something wrong happens, unless you know what you are doing, leave your device alone and come here to ask for help.
Q: Can I hold you responsible for any damage to my phone/etc?
A: As usual, the answer is 'No'
Q: I found an error in your write-up!
A: Please let me know immediately.
-Chris.
You should probably use the latest TWRP 2.6.3.1 found here: http://techerrata.com/file/twrp2/find5/openrecovery-twrp-2.6.3.1-find5.img
Looks good to me. Just be very carefully doing this.
Sent from my Find 5 using xda app-developers app
gdisk -b /sdcard/gpt.bin /dev/block/mmcblk0
those commands need to be typed in recovery even that one ?
Yes although I imagine this particular command should also work when booting system.
Sent from my Find 5 using Tapatalk
This thread is fine the only problem here is with those 2 binaries: mke2fs and tune2fs
You don't need to push them or chmod them since they are already in the recovery
Except that that thread is perfect.
Since we're at toying with partition, can't we merge the partitions in some way ?
Just wondering is there any way to build a script to do this in an automated way thus avoiding user errors and typos?
There is a thread on the oppo forums
http://www.oppoforums.com/threads/guide-resizing-internal-storage-on-find-5-32gb.8361/
Hello everyone,
is the guide for the 32 or 16 gb model?
I have 16 gb Oppo find 5.
Thanks.
PS: what "on your phone" is supposed to mean"?
Click to expand...
Click to collapse
If you don't know what does that mean don't do it you'll screw your phone.
hi
Please would you make something like this for oppo find 7a x9006?
thanks
Anyone willing to recompute all the offsets dor just one 16gb partition?
Scribed henceforth from thy G pad.
Hi all, I am trying to do this mod and I am half way through it with a problem
I am stuck on the new file system, I cannot use mke2fs or tune2fs, i get
Code:
mke2fs: not found
like it doesn't even exist, but it does I can see it. I get the same error for tune2fs. but parted and gdisk work fine.
Yes I did push them and chmod 755 them.. and I have tried running it from the /sbin directory.
Help!
Hello!
I'm getting the same error over and over again creating /dev/block/mmcblk0p21 to /dev/block/mmcblk0p22:
tune2fs -c 0 -i -1 -C -1 /dev/block/mmcblk0p21
"Bad magic number in super-block while trying to open /dev/block/mmcblk0p21"
"Couldn't find valid filesystem superblock"
So i can't create a file system on the created partitions. I have been looking everywhere for an answer. Somebody have an idea?
U should just wait. Andrew dodd found a way to make find7a have unified partition and he claims he can make it work on find5 as well. Let's give him a bit to figure it out tho.
Scribed henceforth from thy G pad.
Gdisk not working...
Ok guys sort of a noob here... Firstly, totally appreciate what you guys are doing here... I wants it bad, thass why i'm here.
So far... I have i have done...
"adb reboot recovery"
"adb push gdisk /sbin"
I figured that's how you are supposed to install it ... hope i'm not wrong, but i guess it pushed through fine
But after rebooting to system in TWRP , i opened terminal emulator and when i use the command
"gdisk -b /sdcard/gpt.bin /dev/block/mmcblk0"
I get ...
"/system/bin/sh: gdisk: not found"
now i'm too scared to proceed without backing up the partition tables... so please help...
edit - FYI , i'm running the last build of Asylum Carbon... should i just go back to latest oopo stable stock rom and then root my device again and then try all this again... would that help... ???
Directly from Andrew Dodds g+ " IT HAS BEGUN.
The first phase of Find 7a/7s LVM testing is here.* See linked post for details.* (Sorry to disappoint, but the first phase is "make sure we don't break existing configurations")
Once this phase is complete, the remaining list is:
Fix up the remaining TWRP issues (make RECOVERY_SDCARD_ON_DATA runtime instead of compile-time)
Make user-friendly conversion processes
Once things are solid on Find 7, I'll work on Find 5 and N1."
Stay thirsty my friends. Good things ahead
Sent from my A0001 using Tapatalk
Does this work for the 16gb model?
Can someone help please?
I'm trying to do this, but after enter in parted [parted /dev/block/mmcblk0] when i try to do "rm 29", i get "can't remove 29: no such file or directory
I'm doing the "on your phone" commands in TWRP command line., is that correct?
I'm running stable colorOS 1.0.9i
Finally I finish the process.
My notes:
Goal:
Keep my current system intact (stable colorOS 1.0.9i , because i have no patience to format, install a new ROM and reinstall/recofigure everything
So I backup everything on phone with TWRP and I push sdcard content (wich include the system backup i made) with ADB
1 - If I push mke2fs and tune2fs IT WILL NOT WORK. I flash the last find 5 recovery (openrecovery-twrp-2.8.1.0-find5.img) and I dont push or chmod anyting, parted, mke2fs, tune2fs are all already in the recover and that's the only way I could run mke2fs and tune2fs
edit: 1.5 - The phone commands had to be enter via ADB shell. In TWRP command line, after you enter in parted it will not accept commands.
2 - To "rm 29", i had to "umount /dev/block/mmcblk0", otherwise "rm 29" fail due to partition in use
3 - after this instruction:
mount -t vfat /dev/block/mmcblk0p29 /sdcard
(the last one on the 4 block of code)
We have this:
# Restore /persist partition
mount -t ext4 /dev/block/mmcblk0p29 /sdcard
This instruction was the only one that give me a error, so I move to the next ones.
The error was that the partition was busy, what makes senses because in the last instruction we mount the same partition on the same folder but with different file system!!??
So I move to the next instruction. I have no idea if it's a instructions mistake but it looks like, because it says "# Restore /persist partition" but the command has nothing to do with /persist
4 - FINISH
5 - Reboot in recovery. Push sdcard backup to /sdcard. restore system backup with TWRP restore
Voila, my phone exactly as before but with 3,76GB for APPS. Finally!!! The "running out of space" message on a flagship quad-core 2GB RAM phone!!!!!!?????? Was driving me CRAZYYYYY
Thanks Fickx for the up to date information, I just did my re-partition successfully, here's what I did:
- Use Rashr update the recovery to twrp-2.8.1.0
- reboot into recovery
- connect to PC (Make sure adb works, "adb devices")
- on PC:
> adb shell
> umount /cache
> umount /sdcard
> umount /emmc
> umount /data
> umount /dev/block/mmcblk0p29
> parted /dev/block/mmcblk0
> rm 29
>...
> rm 20
> mkpart primary 1325 5421
> name 20 userdata
> ...
> name 29 sdcard
> q
> mke2fs ...
> ...
> mount -t -vfat /dev/block/mmcblk0p29 /sdcard
Open another PC command terminal
> adb push mmcblk0p21_persist_ext4.img /sdcard/
> adb push openrecovery-twrp-2.8.1.0-find5.img /sdcard/
Back to original terminal in "adb shell".
> dd if=/sdcard/mmcblk0p21_persist_ext4.img of=/dev/block/mmcblk0p21
> dd if=/sdcard/openrecovery-twrp-2.8.1.0-find5.img of=/dev/block/mmcblk0p24
> exit
> adb reboot recovery
Flash the rom.
Since the gapps for 4.4 need very much space wee need bigger system partitions.
I've created a script which automates this process and increases them both to 840MB.
the space is taken from the userdata partition.
You should backup your whole phone before doing this(storage will not be touched but you shouldn't take the risk)
I tested it with 32GB version only so if you want to know if it will work for 16gb, too give me the output of this command:
parted -s /dev/block/mmcblk0 print
Download:
http://d-h.st/FWz
Instructions:
1) boot into CWM
2) adb push repartition.sh /tmp
3) adb shell chmod 0777 /tmp/repartition.sh
4) adb shell /tmp/repartition.sh
5) adb reboot recovery
6) now you can do all the usual stuff like enabling TDB and installing ROM's
Sounds great but I cannot test it, since I dont have any parted binaries (at least in my 4.1.1 Wajk Wiui ROM) ? Can you please tell me where I can get them.
Second Question:
Im currently running TDB:
System 1 latest WIUI 4.1.1 v5 ROM
System 2 MIUI v6 1.9.19
Both system partitions are completely full (usage 98 %) and the same with the data partitions ( usage 97 % )!
Would it be possible to decrease /sdcard space and repartition it like the following with TDB enabled:
system 800 mb
system1 800 mb
data 1500 mb
data1 1500 mb
sdcard *the rest*
thanks in advance
sounds like you tried to repartition from Android
You need to boot to CWM - you have parted there.
Sorry I hate people who just ask stupid questions before reading the instructions carefully ...silly me sorry for that...
What about the second question, is it possible to either increase the data partitions for less space on /sdcard ?
there isn't sth. like a data1 partition. we have one data partition only that's why we need the TDB hack.
other than that it's possible but you should backup all your data and restore it afterwards.
m11kkaa said:
there isn't sth. like a data1 partition. we have one data partition only that's why we need the TDB hack.
other than that it's possible but you should backup all your data and restore it afterwards.
Click to expand...
Click to collapse
Ok got it.
So following your instructions and editing script like the following should work ?
Code:
change_table() {
ui_print "parted: delete"
parted -s /dev/block/mmcblk0 rm 23 || return 1 # system
parted -s /dev/block/mmcblk0 rm 24 || return 1 # system1
parted -s /dev/block/mmcblk0 rm 25 || return 1 # cache
parted -s /dev/block/mmcblk0 rm 26 || return 1 # userdata
parted -s /dev/block/mmcblk0 rm 27 || return 1 # storage
ui_print "parted: create"
parted -s /dev/block/mmcblk0 mkpartfs primary ext2 336MB 1176MB || return 1
parted -s /dev/block/mmcblk0 mkpartfs primary ext2 1176MB 2016MB || return 1
parted -s /dev/block/mmcblk0 mkpartfs primary ext2 2016MB 2419MB || return 1
parted -s /dev/block/mmcblk0 mkpartfs primary ext2 2419MB 6515MB || return 1
parted -s /dev/block/mmcblk0 mkpartfs primary ext2 6515MB 31.3GB || return 1
ui_print "parted: name"
parted -s /dev/block/mmcblk0 name 23 system || return 1
parted -s /dev/block/mmcblk0 name 24 system1 || return 1
parted -s /dev/block/mmcblk0 name 25 cache || return 1
parted -s /dev/block/mmcblk0 name 26 userdata || return 1
parted -s /dev/block/mmcblk0 name 27 storage || return 1
return 0
}
Code:
ui_print "format partitions"
for NUM in 23 24 25 26 27
do
if ! format_partition "$NUM"; then
ui_print "Failed format partition $NUM"
exit 1
fi
done
already did full backup of sdcard, i just dont know if i should disable TDB before i stat repartitioning ... I dont know how TDB works to split the data partition thats my problem :/
yes that should work.
You don't need to disable TDB because your whole data partition will be wiped and it stores the TDB configuration(that means that TDB automatically gets disabled).
Had some errors but now its working fine ..thanks
unmount sdcard in CWM. It's a bug of this script.
Nice to hear it works now.
7 days ago Phone not start because partition corrupt
Hello
First do not panic is not the fault of your script but for you experience with mi2s and partitions are the few people in the world that can save my phone.
I'm playing a game phone(Xiaomi m2s 16GB) hang and one or more partitions are corrupt (I think this is the problem). But all de documentation than i find to delete o edit partition not work. Fastboot rom installation all ok but always only start with white logo. Mirecovery works perfectly and CWM by ivan works but temporally with this command sudo fastboot boot recovery.img
This is the result of your script
check environment
/sbin/mount
/sbin/umount
/sbin/parted
/sbin/tune2fs
/sbin/e2fsck
dump old table
unmount partitions
umount: can't umount /system: Invalid argument
umount: can't umount /system1: No such file or directory
umount: can't umount /data: Invalid argument
umount: can't umount /data_root: Invalid argument
umount: can't umount /sdcard: Invalid argument
change partition table
parted: delete
parted: create
Error: Unable to satisfy all constraints on the partition.
Failed changing table
OTHER TEST
/dev/block # e2fsck -fDp /dev/block/mmcblk0p24
e2fsck: Bad magic number in super-block while trying to open /dev/block/mmcblk0p24
/dev/block/mmcblk0p24:
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
/dev/block # tune2fs -O extents,uninit_bg,dir_index /dev/block/mmcblk0p24
tune2fs 1.41.14 (22-Dec-2010)
tune2fs: Bad magic number in super-block while trying to open /dev/block/mmcblk0p24
Couldn't find valid filesystem superblock.
I try to delete partition and create a new one but fail.
(parted) rm 24
rm 24
(parted) mkpartfs primary ext2 872 1409
mkpartfs primary ext2 872 1409
Error: Unable to satisfy all constraints on the partition.
I FOUND THIS IN XDA FORUM BUT I HAVEN'T IMAGE TO TEST
adb push mmcblk0p19_repaired.img /tmp/
adb shell dd if=/tmp/mmcblk0p19_repaired.img of=/dev/block/mmcblk0p19
adb reboot bootloader
MY PARTITION TABLE SYSTEM1 NOT HAVE FILESYSTEM EXT4
[email protected]:~/Escritorio/recovery$ sudo adb shell parted -s /dev/block/mmcblk0 print
Model: MMC SEM16G (sd/mmc)
Disk /dev/block/mmcblk0: 15.8GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 17.4kB 89.1MB 89.1MB fat16 modem
2 89.1MB 178MB 89.1MB fat16 modem1
3 178MB 179MB 524kB sbl1
4 179MB 179MB 524kB sbl2
5 179MB 180MB 1049kB sbl3
6 180MB 181MB 1049kB rpm
7 181MB 182MB 1049kB tz
8 182MB 183MB 524kB DDR
9 183MB 187MB 4194kB aboot
10 187MB 188MB 1049kB misc
11 188MB 191MB 2990kB logo
12 191MB 192MB 799kB m9kefs1
13 192MB 193MB 799kB m9kefs2
14 193MB 193MB 1024B m9kefsc
15 193MB 201MB 8501kB bk1
16 201MB 202MB 799kB m9kefs3
17 202MB 268MB 66.3MB bk2
18 268MB 284MB 15.7MB boot
19 284MB 300MB 15.7MB boot1
20 300MB 316MB 15.7MB recovery
21 316MB 327MB 11.5MB bk3
22 327MB 336MB 8389kB ext4 persist
23 336MB 872MB 537MB ext4 system
24 872MB 1409MB 537MB system1
25 1409MB 1812MB 403MB ext4 cache
26 1812MB 5570MB 3758MB ext4 userdata
27 5570MB 15.8GB 10.2GB ext4 storage
Xiaomi Mi2 32GB
XIAOMI MI2 32GB ONLY
For those using a single MIUI ROM I've made a partition table with system1 set to 1024Mb.
Run the attached from CWM (in /tmp).
Aternus said:
XIAOMI MI2 32GB ONLY
For those using a single MIUI ROM I've made a partition table with system1 set to 1024Mb.
Run the attached from CWM (in /tmp).
Click to expand...
Click to collapse
Can you explain a little more? Does it only leave 1 system partition? Can I flash it like a regular zip?
Enviado desde mi MI 2S mediante Tapatalk
any step by step manual how to change partition? with all necessary downloads etc...
or.... is it possible to delete system2 with all its parts? - for me I'd to use system1 only
Why can not I change the size of the system partition?
Already tried several times, with disabled TDB and with enabled TDB.
Full wipe did and still no result.
P.S. I have already been able to do any repartitioning.
Code:
PS C:\Android> adb push repartition.sh /tmp
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
21 KB/s (3797 bytes in 0.169s)
PS C:\Android> adb shell chmod 0777 /tmp/repartition.sh
PS C:\Android> adb shell /tmp/repartition.sh
check environment
/sbin/mount
/sbin/umount
/sbin/parted
/sbin/tune2fs
/sbin/e2fsck
dump old table
__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
unmount partitions
umount: can't umount /system: Invalid argument
umount: can't umount /system1: No such file or directory
umount: can't umount /data: Invalid argument
umount: can't umount /sdcard: Invalid argument
change partition table
parted: delete
parted: create
parted: name
format partitions
format: /dev/block/mmcblk0p23
tune2fs 1.41.14 (22-Dec-2010)
tune2fs: No such file or directory while trying to open /dev/block/mmcblk0p23
Couldn't find valid filesystem superblock.
e2fsck 1.41.14 (22-Dec-2010)
e2fsck: No such file or directory while trying to open /dev/block/mmcblk0p23
Possibly non-existent device?
tune2fs 1.41.14 (22-Dec-2010)
e2fsck 1.41.14 (22-Dec-2010)
Adding dirhash hint to filesystem.
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 3A: Optimizing directories
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/block/mmcblk0p23: ***** FILE SYSTEM WAS MODIFIED *****
/dev/block/mmcblk0p23: 11/500856 files (0.0% non-contiguous), 62917/1000445 blocks
format: /dev/block/mmcblk0p24
tune2fs 1.41.14 (22-Dec-2010)
Creating journal inode: done
This filesystem will be automatically checked every 30 mounts or
0 days, whichever comes first. Use tune2fs -c or -i to override.
e2fsck 1.41.14 (22-Dec-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 3A: Optimizing directories
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/block/mmcblk0p24: ***** FILE SYSTEM WAS MODIFIED *****
/dev/block/mmcblk0p24: 11/262144 files (0.0% non-contiguous), 49386/524289 blocks
tune2fs 1.41.14 (22-Dec-2010)
e2fsck 1.41.14 (22-Dec-2010)
Adding dirhash hint to filesystem.
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 3A: Optimizing directories
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/block/mmcblk0p24: ***** FILE SYSTEM WAS MODIFIED *****
/dev/block/mmcblk0p24: 11/262144 files (0.0% non-contiguous), 49386/524289 blocks
format: /dev/block/mmcblk0p25
tune2fs 1.41.14 (22-Dec-2010)
Creating journal inode: done
This filesystem will be automatically checked every 30 mounts or
0 days, whichever comes first. Use tune2fs -c or -i to override.
e2fsck 1.41.14 (22-Dec-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 3A: Optimizing directories
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/block/mmcblk0p25: ***** FILE SYSTEM WAS MODIFIED *****
/dev/block/mmcblk0p25: 11/196608 files (0.0% non-contiguous), 32935/393217 blocks
tune2fs 1.41.14 (22-Dec-2010)
e2fsck 1.41.14 (22-Dec-2010)
Adding dirhash hint to filesystem.
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 3A: Optimizing directories
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/block/mmcblk0p25: ***** FILE SYSTEM WAS MODIFIED *****
/dev/block/mmcblk0p25: 11/196608 files (0.0% non-contiguous), 32935/393217 blocks
format: /dev/block/mmcblk0p26
tune2fs 1.41.14 (22-Dec-2010)
Creating journal inode: done
This filesystem will be automatically checked every 30 mounts or
0 days, whichever comes first. Use tune2fs -c or -i to override.
e2fsck 1.41.14 (22-Dec-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 3A: Optimizing directories
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/block/mmcblk0p26: ***** FILE SYSTEM WAS MODIFIED *****
/dev/block/mmcblk0p26: 11/399200 files (9.1% non-contiguous), 28951/798348 blocks
tune2fs 1.41.14 (22-Dec-2010)
e2fsck 1.41.14 (22-Dec-2010)
Adding dirhash hint to filesystem.
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 3A: Optimizing directories
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/block/mmcblk0p26: ***** FILE SYSTEM WAS MODIFIED *****
/dev/block/mmcblk0p26: 11/399200 files (9.1% non-contiguous), 28951/798348 blocks
Done.
PS C:\Android> adb reboot recovery
PS C:\Android>
UPD. The problem was that I was using Windows Povershell
Run the script from the command line and everything turned out.
Thanks!
I have to format first system and system1 in recovery to apply this script, because I have and error :
tmp/repartition.sh lin 115 can´t create /sdcard/parted_12_06_2014_FDFD6F4CB043F4956D9CAD053C3738AA.
DO MOUNT your SDCARD
then Follow the instruction
duhh...
I modified the script a little bit for 1 ROM usage. System1 is 840MB as in the original and System2 is 5MB. The rest goes into userdata. This is for the 16GB version.
Ok! I did again and umount the sdcard abd it worked fine.
Thanks
I found a better way
If u reboot into dload mode, u can change the partition table from your computer
The problem is that most partition managers don't support changing the GPT Partition names and that's why I added support for that to GParted.
GParted supports booting from Live CD/USB so Windows/Mac users aren't left out.
http://i.imgur.com/3SwSXs2.png
I pushed the patch to GParted repo's and I'll inform u once there're any news.
from my point of view the best way for use is:
- system (system1) - let 1024 MB
- system1 (system2) - let 10 MB
- userdata (apps) - let 4096 MB (take it from sdcard) - but maybe more