[WIP][MODEM][SM-T705] **LTE BANDS IN USA**[TESTERS NEEDED][DEV ASSISTANCE req] - Galaxy Tab S Android Development

D*mnit...i just typed up this informative article to explain whats going on & then the ENTIRE thing got deleted
Please keep checking this post as i will gradually add back the info as i go...for now i will post the zips/files & steps I've taken up to this point along with any other knowledge that u need to know and thx to @sicarius128 for pointing out the release of the south american model
View attachment USALTE705_NG1_MODEM.zip
^T705M NG1 MODEM (Flashing this will enable the north american LTE frequencies...i have tested this myself & it DOES indeed work to change the bands)
View attachment STOCK705_NF7_MODEM.zip
^T705 NF7 MODEM (this will put u back on the stock radio if u need it...although it is labeled NF7 it is the same modem that is included with the newer NG2 as well)
IF ANYONE IS ACTUALLY ABLE TO CONNECT AFTER FLASHING THIS THEN PLEASE DONT JUST GET HAPPY AND RUN OFF BECAUSE I NEED ALL THE DETAILS I CAN GET...THX IN ADVANCE
if u enter the dial code *#2263# (if this doesnt work then try *#0011#...i will include a link below with navigation instructions to get to the band selection menu) then select "LTE BAND" both before & after then u will notice that those available have in fact changed from "1.3,5,7,8,20" which are the stock/rest of the world values to "1,2,4,5,7,17" which correspond to the correct USA frequencies...at this point the mod MAY very well be working for some users but unfortunately for me my device still wont connect to the lte network for whatever reason so i need testers to see if this is an exclusive issue to my tab/sim or are there other settings that need to be changed somewhere. Below i will list additional steps i have taken & document other pieces of the puzzle i have put together for those of u who are interested,,,i humblyrequest that any devs or other knowledgeable users PLEASE post with your wisdom so we can get this working
http://forum.xda-developers.com/galaxy-tab-s/help/unlock-aws-tab-s-8-4-lte-t2860001
^SERVICE MODE *#0011# NAVIGATION INSTRUCTIONS (please see post #2...there is an app called "advanced signal status" that makes this easier to access)
So...once i flashed the columbian modem & found that i still wasnt connecting to LTE even though the NA frequencies were in fact found in the aforementioned menu i tried a few more fixes. After doing some reading i ran across a file in the "system/etc" folder named "lteon_netlist.xml" which seems to contain an index of whitelisted lte networks from around the world & upon opening it i noticed that ALL of the north american companies were missing. i found the the file of the same name from the columbian rom & sure enough it included AT&T as well as t-mo & other domestic services. This almost SURELY seems to be an important part of the problem but even after replacing this file my problem persisted...i guess i should mention that i'm on straight talk with an ATT compatible sim & it may not be important but i tried my sim in a LG phone & it worked after i forced it to LTE . To further complicate things...it wouldnt work on an ATT branded note 3 & the sim card from the same note 3 wouldnt connect to lte on my device either even with proper apn settings
So with all of that said...a few more failed attempts i've made include the following
1. added various apn settings including KNOWN working values on other devices
2. deleted "persist.radio.lteon" from the location "data/property" or change its value from false to true
3. flashed the kernel from the colombian rom & even created an entire rom from the firmware in hope that some combination of the files it contained would cause it to connect...everything was fully functional after the fact but alas no LTE
4. did a REAL factory reset with the stock recovery which even erases the contents of the internal sd card
5. altered a note 2 zip which contains ATT csc files inside which interesting enough does change the device product code to T705NTSAATT according to the app "phone info" (links to zip & app below)
6. Used the band selection menu mentioned above to force lte bands only but not only does ths not work it desnt seem to survive a reboot either...i also used the app method to do the same (link below)
7. Last but not least...i have tried to flash the bootloader & YES i'm aware of how dangerous this is which is why i wont be uploading the zip here although i havent yet found a way to get it to overwrite which is one of the question i need answered below
View attachment lteon_netlist.zip
^LTEON_NETLIST.XML (this zip is NOT flashable because i was being lazy :silly:....unzip then replace the file in "system/etc" & dont forget to change permissions to 0644 or rw-r--r--)
View attachment CSC_705_ATT.zip
^ATT CSC (please be aware...this will show the csc version as N7100ATTDMB1 but doesnt seem to cause any issues)
https://play.google.com/store/apps/details?id=com.cc.signalinfo&hl=en\
^ADVANCED SIGNAL STATUS APP (used to determine your current network connection...can be used to force to a certain type or to enable/disable individual gsm/wcdma/lte bands
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en
^PHONE INFO (provides a ton of info about your device...including a list of all secret codes as well as a csc changer)
couple of quick questions for anyone who can provide answers or otherwise assist...thx in advance
1. @bentee20 @crzcraft does choosing the particular bands or lte only in fact force the mode on your devices...i'm aware when u use the app method that u will need to change the setting every boot. Just out of curiousity...could u guys post your location and device/rom details
2. @vovochka-s2 did u ever find a 705 pit file or can anyone else please provide one for us?
3. Directly related to issue 2...has anyone use hemidall to flash there tab & if so could u please list the steps as well as version u used
4. i dont expect any other users to attempt this at least until i can confirm it fixes things...CAN ANYONE PLEASE PROVIDE A PROVEN WAY OF FLASHING THE BOOTLOADER ON NEWER GALAXY DEVICES? It wont flash through odin do to security reasons (neither would the modem file file but it flashed fine using twrp)...i have tried installing it through recovery but after reboot nothing seems to have been changed according to the phone info app
the input of @UpInTheAir (particularly would like your opinion on #3 & #4 above...yeah i know bro but i'm so close & this is the level of desperation i have reached :laugh or @edan1979 would be welcome although i dont think either of u are actually in the states so im not sure how important this issue is to u if at all...to answer your question from the other thread a few weeks NO i 'm not aware of the exact location of the network selector list but i did notice that it disappears from settings after using the att csc zip so i might spend some time to track it down tonight even though i came across an easy way to change it back
@Hakams the above modem should fix your issue if u never figured it out...please report your results

Sorry, I'm not going to get involved with bootloaders, if you get that wrong, your device is in a permanent world of hurt. It is possible to flash with Odin and I remember CWM.zip from the SGS2 days. On some devices, once you upgrade, it is impossible to revert.
Kernel side:
There is option in kernel build .config file with various regions. I haven't yet looked at what it really does in any sort of depth. I think I remember some thresholds and such. Maybe also drivers specific to various regions. (incl. modem/mobile connectivity ??? )
Code:
CONFIG_TARGET_LOCALE_EUR=y
# CONFIG_TARGET_LOCALE_KOR is not set
# CONFIG_TARGET_LOCALE_USA is not set
# CONFIG_TARGET_LOCALE_DEMO is not set
I don't know if it will even compile, but will try later on if you wish ?

UpInTheAir said:
Sorry, I'm not going to get involved with bootloaders, if you get that wrong, your device is in a permanent world of hurt. It is possible to flash with Odin and I remember CWM.zip from the SGS2 days. On some devices, once you upgrade, it is impossible to revert.
Kernel side:
There is option in kernel build .config file with various regions. I haven't yet looked at what it really does in any sort of depth. I think I remember some thresholds and such. Maybe also drivers specific to various regions. (incl. modem/mobile connectivity ??? )
Code:
CONFIG_TARGET_LOCALE_EUR=y
# CONFIG_TARGET_LOCALE_KOR is not set
# CONFIG_TARGET_LOCALE_USA is not set
# CONFIG_TARGET_LOCALE_DEMO is not set
I don't know if it will even compile, but will try later on if you wish ?
Click to expand...
Click to collapse
I understand the risks & all i'm asking if u happen to know a sure-fire way then please pm me or something but i've already attempted odin, twrp & even dd with no results (of course this would be a last resort option...as more users present new info i'm sure i can find the patience to exhaust those possibilities before doing anything dumb)...as far as the kernel is concerned if its not too much trouble then PLEASE attempt to build one for us. I tried the one from the T705M but as i already stated above it flashed fine & was fully functional but didnt let me connect to LTE...one would assume those configurations would already be set since the frequencies are unlocked by default although i could see samsung using that as another way to keep those devices out of the american market so that they dont hurt domestic sales. I appreciate u chiming in & patiently await a test build of the USA enabled kernel...thx in advance

You won't know of a sure fire way until (if) it's successfully done. ...
If you want to proceed, I can't help with that as I haven't played with the BL for a long time and don't want to give wrong or outdated info. Different devices use different ways.
As I said, I won't get involved with the BL at all (publically or PM).
I will try and compile that kernel for you though.

PM sent:
kernel compiled
Code:
CONFIG_TARGET_LOCALE_USA=y
Fairly sure it won't do anytrhing, could only find threshold changes in source related to that config change.
Please be aware I haven't tested the kernel for boot. There is a CIFS patch I've implemented not in v1.5.
The "problem" could actually be on the hardware side. I've owned a I9100T and I9300T. I remember that modems on ther "T" models were optimised for 850 MHz 3G band. The only difference was (the software) modem, and some internal jumper (recalling fading memory here.....)
Ha, found a thread regarding the SGS3 jumper,......... http://forum.xda-developers.com/galaxy-s3/help/samsung-galaxy-s3-19300t-t1688836/page2
My point is, that there could be hardware changes needed as well

I cant do anything as well. its out of my league.

This would be very useful, maybe US users raise some funds to pay for a test device for a recognized developer to see if this could be implemented?
However if it's a one-shot and the phone/tablet is permanently useless, than it might not be worth it.

PIT
I created a PIT file for SM-T705 16GB through heimdall. Cannot for the life of me get firmware to flash with the PIT (re-partition enabled), checked the PIT with PIT Magic on Windows and seems OK, but then again, unfortunately I don't know a great deal about it. I tried with Odin 1.85, 3.07, 3.09. All setup is Ok because I can flash the firmware without.
There was a risk of hard brick,......... but I was "in the mood". That mood is changing again though .............

edan1979 said:
I cant do anything as well. its out of my league.
Click to expand...
Click to collapse
It's ok bro...thx for checking in
Satorikn said:
This would be very useful, maybe US users raise some funds to pay for a test device for a recognized developer to see if this could be implemented?
However if it's a one-shot and the phone/tablet is permanently useless, than it might not be worth it.
Click to expand...
Click to collapse
Although I would prefer not to I'm willing to risk a brick of my own personal device & just file an insurance claim if so...hopefully we will have a breakthrough before then
UpInTheAir said:
I created a PIT file for SM-T705 16GB through heimdall. Cannot for the life of me get firmware to flash with the PIT (re-partition enabled), checked the PIT with PIT Magic on Windows and seems OK, but then again, unfortunately I don't know a great deal about it. I tried with Odin 1.85, 3.07, 3.09. All setup is Ok because I can flash the firmware without.
There was a risk of hard brick,......... but I was "in the mood". That mood is changing again though .............
Click to expand...
Click to collapse
Could u PLEASE upload or pm me the pit file kind sir...don't know if u tried the custom kernel yourself but even though it was a no go I definitely appreciate the effort
@UpInTheAir
hate to waste a post so hopefully u will see this bat signal...which drivers/process did u use to get heimdall to even initiate the flashing process? I can get it too recognize the device fine but once I press start I have various errors depending upon which driver i choose in zdiag...starting to wonder if it's because I'm on x64 Windows 8 or what?

THEDEVIOUS1 said:
It's ok bro...thx for checking in
Although I would prefer not to I'm willing to risk a brick of my own original device & just file an insurance claim if so...hopefully we will have a breakthrough before then
Could u PLEASE upload or pm me the pit file kind sir...don't know if u tried the custom kernel yourself but of course it was a no go but I definitely appreciate the effort
Click to expand...
Click to collapse
This is the heimdall PIT printout:
Entry Count: 24
Unknown 1: 1598902083
Unknown 2: 844251476
Unknown 3: 21324
Unknown 4: 13641
Unknown 5: 12596
Unknown 6: 48
Unknown 7: 0
Unknown 8: 0
--- Entry #0 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 80
Attributes: 2 (STL Read-Only)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 0
Partition Block Count: 2046
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: BOOTLOADER
Flash Filename: sboot.bin
FOTA Filename:
--- Entry #1 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 70
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 34
Partition Block Count: 16
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: PIT
Flash Filename: -
FOTA Filename:
--- Entry #2 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 71
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 50
Partition Block Count: 2048
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: MD5HDR
Flash Filename: md5.img
FOTA Filename:
--- Entry #3 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 1
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 8192
Partition Block Count: 8192
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: BOTA0
Flash Filename: -
FOTA Filename:
--- Entry #4 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 2
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 16384
Partition Block Count: 8192
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: BOTA1
Flash Filename: -
FOTA Filename:
--- Entry #5 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 3
Attributes: 5 (Read/Write)
Update Attributes: 5 (FOTA)
Partition Block Size/Offset: 24576
Partition Block Count: 40960
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: EFS
Flash Filename: efs.img
FOTA Filename:
--- Entry #6 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 4
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 65536
Partition Block Count: 8192
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: m9kefs1
Flash Filename: m9kefs1.bin
FOTA Filename:
--- Entry #7 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 5
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 73728
Partition Block Count: 8192
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: m9kefs2
Flash Filename: m9kefs2.bin
FOTA Filename:
--- Entry #8 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 6
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 81920
Partition Block Count: 8192
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: m9kefs3
Flash Filename: m9kefs3.bin
FOTA Filename:
--- Entry #9 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 7
Attributes: 5 (Read/Write)
Update Attributes: 5 (FOTA)
Partition Block Size/Offset: 90112
Partition Block Count: 8192
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: CARRIER
Flash Filename: carrier.img
FOTA Filename:
--- Entry #10 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 8
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 98304
Partition Block Count: 16384
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: PARAM
Flash Filename: param.bin
FOTA Filename:
--- Entry #11 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 9
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 114688
Partition Block Count: 16384
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: BOOT
Flash Filename: boot.img
FOTA Filename:
--- Entry #12 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 10
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 131072
Partition Block Count: 20480
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: RECOVERY
Flash Filename: recovery.img
FOTA Filename:
--- Entry #13 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 11
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 151552
Partition Block Count: 20480
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: OTA
Flash Filename: -
FOTA Filename:
--- Entry #14 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 12
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 172032
Partition Block Count: 8192
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: CDMA-RADIO
Flash Filename: modem_cdma.bin
FOTA Filename:
--- Entry #15 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 13
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 180224
Partition Block Count: 98304
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: RADIO
Flash Filename: modem.bin
FOTA Filename:
--- Entry #16 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 14
Attributes: 5 (Read/Write)
Update Attributes: 5 (FOTA)
Partition Block Size/Offset: 278528
Partition Block Count: 8192
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: TOMBSTONES
Flash Filename: tombstones.img
FOTA Filename:
--- Entry #17 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 15
Attributes: 5 (Read/Write)
Update Attributes: 5 (FOTA)
Partition Block Size/Offset: 286720
Partition Block Count: 8192
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: TDATA
Flash Filename: tdata.img
FOTA Filename:
--- Entry #18 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 16
Attributes: 5 (Read/Write)
Update Attributes: 5 (FOTA)
Partition Block Size/Offset: 294912
Partition Block Count: 24576
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: PERSDATA
Flash Filename: persdata.img
FOTA Filename:
--- Entry #19 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 17
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 319488
Partition Block Count: 8192
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: RESERVED2
Flash Filename: -
FOTA Filename:
--- Entry #20 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 18
Attributes: 5 (Read/Write)
Update Attributes: 5 (FOTA)
Partition Block Size/Offset: 327680
Partition Block Count: 4894720
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: SYSTEM
Flash Filename: system.img
FOTA Filename:
--- Entry #21 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 19
Attributes: 5 (Read/Write)
Update Attributes: 5 (FOTA)
Partition Block Size/Offset: 5222400
Partition Block Count: 409600
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: CACHE
Flash Filename: cache.img
FOTA Filename:
--- Entry #22 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 20
Attributes: 5 (Read/Write)
Update Attributes: 5 (FOTA)
Partition Block Size/Offset: 5632000
Partition Block Count: 471040
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: HIDDEN
Flash Filename: hidden.img
FOTA Filename:
--- Entry #23 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 21
Attributes: 5 (Read/Write)
Update Attributes: 5 (FOTA)
Partition Block Size/Offset: 6103040
Partition Block Count: 0
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: USERDATA
Flash Filename: userdata.img
FOTA Filename: remained
I'm just going to give it one last shot..........
Edit: Failed again, stuck at "get PIT for mapping" using 3.07.
PM sent
@THEDEVIOUS1
Installed heimdall on Ubuntu 14.04 64bit ..... Just for your PIT
I didn't actually try flashing anything through heimdall though. Never have (yet).
Kept getting an error eventually download the PIT with device connected to the PC USB 3.0 port. ..
Edit2: Tried to flash PIT with heimdall, but no go. "ERROR: Failed to receive PIT file part response!" , obviuosly something wrong with the PIT. I tried via DD and managed to pull some sort of PIT (doesn't flash), because the count= & BS= no idea where to obtain this info. I'm sure it's device specific

Tester
I will test this tonight when I get home and report back.
Question: What are my chances I will have a successful flash? This may be an obvious question, but assume I will need to root my device first, right?
Device Model: SM-T705
Baseband version: T705ZHU1ANG2
Kernel version: 3.4.39-2290729 [email protected] #1
Build number: KOT49H T705ZHU1ANG2

jadid said:
I will test this tonight when I get home and report back.
Question: What are my chances I will have a successful flash? This may be an obvious question, but assume I will need to root my device first, right?
Device Model: SM-T705
Baseband version: T705ZHU1ANG2
Kernel version: 3.4.39-2290729 [email protected] #1
Build number: KOT49H T705ZHU1ANG2
Click to expand...
Click to collapse
I think the attachments do not exist (maybe taken off a while back)

mac231us said:
I think the attachments do not exist (maybe taken off a while back)
Click to expand...
Click to collapse
Oh man, that suxs! Is there anyway I can get it? I would really like to have my device work with US bands.

jadid said:
Oh man, that suxs! Is there anyway I can get it? I would really like to have my device work with US bands.
Click to expand...
Click to collapse
you might want to ask the OP..he maintains 2 roms one for tabpro and tab S..maybe more...so he is still active on these forums

mac231us said:
you might want to ask the OP..he maintains 2 roms one for tabpro and tab S..maybe more...so he is still active on these forums
Click to expand...
Click to collapse
Thanks, I will!

mac231us said:
I think the attachments do not exist (maybe taken off a while back)
Click to expand...
Click to collapse
not sure what happended...thx for making me ware they were missing
jadid said:
I will test this tonight when I get home and report back.
Question: What are my chances I will have a successful flash? This may be an obvious question, but assume I will need to root my device first, right?
Click to expand...
Click to collapse
the links have been fixed in the first post...thx for testing. i know its a lot but please be sure to read the ENTIRE op...long story short the file labeled USALTE705_NG1_MODEM.zip will in fact flash without problems and show the north american bands when u got to the network menu but still no LTE yet on my personal device (with any luck u will flash this and LTE will automagically work...proving that there is just something set up wrong on my device) The only other zip in the op that i believe to be significant is the lteon_netlist.zip which contains a whitelist of LTE carriers including the north american providers (if u check it against the stock file u will see that they are in fact missing)
while i'm posting i would like to make another plea for some help from other users/devs...can anyone PLEASE tell me a step by step definite method of geting heimdall to recogize this device read the pit/flash files on windows OR linux?!
@pinsb
i posted the band enabling info in thie op of this thread as well as another in the question section...just wanted to get your attention as we may be able to help each other out. So...i'm assuming u were able to achieve root and i was just wondering what chipset the T805W variant uses? (i'm assuming the exynos but i may be mistaken). Most people are not aware but the original samsung tab that tmobile sold could in fact be flashed with the european modem to enable voice calls ( @oldblue910 ...i was gonna bring this to your attention in the other thread but due to the locked bootloader on the ATT version the info was almost irrelevent)! So with all of that said heres what i'm thinking...u MAY be able to flash the brazillian modem which makes calls and also has the north american lte frequencies! Although it would be less impressive...the international modem MAY enable calls with the obvious caveat being that u wouldnt be getting LTE speeds
@jadid
i apologize but i assumed anyone doing this would already have done both...technically all u need to do is flash using cwm/twrp but i would go ahead and root as well

THEDEVIOUS1 said:
not sure what happended...thx for making me ware they were missing
the links have been fixed in the first post...thx for testing. i know its a lot but please be sure to read the ENTIRE op...long story short the file labeled USALTE705_NG1_MODEM.zip will in fact flash without problems and show the north american bands when u got to the network menu but still no LTE yet on my personal device (with any luck u will flash this and LTE will automagically work...proving that there is just something set up wrong on my device) The only other zip in the op that i believe to be significant is the lteon_netlist.zip which contains a whitelist of LTE carriers including the north american providers (if u check it against the stock file u will see that they are in fact missing)
while i'm posting i would like to make another plea for some help from other users/devs...can anyone PLEASE tell me a step by step definite methof of geting heimdall to recogize this device read the pit/flash files on windows OR linux?!
@pinsb
i posted the band enabling info in thie op of this thread as well as another in the question section...just wanted to get your attention as we may be able to help each other out. So...i'm assuming u were able to achieve root and i was just wondering what chipset the T805W variant uses? (i'm assuming the exynos but i may be mistaken). Most people are not aware ( @oldblue910 ...i was gonna bring this to your attention in the other thread but due to the locked bootloader on the ATT version the info was almost irrelevent) but the original samsung tab that tmobile sold could in fact be flashed with the european modem to enable voice calls! So with all of that aid heres what i'm thinking...u MAY be able to flash the brazillian modem which makes calls and also has the north american lte frequencies! Although it would be less impressive...the international modem MAY enable calls with the obvious caveat being that u wouldnt be getting LTE speeds
Click to expand...
Click to collapse
Thank you I appreciate you taking the time to fix the links I download the files. Question: I need to have my device rooted first, right? and do I flash this in odin or cw/twrp? I didn't see any of these details in op.
Thanks again!

THEDEVIOUS1 said:
@pinsb
i posted the band enabling info in thie op of this thread as well as another in the question section...just wanted to get your attention as we may be able to help each other out. So...i'm assuming u were able to achieve root and i was just wondering what chipset the T805W variant uses? (i'm assuming the exynos but i may be mistaken). Most people are not aware but the original samsung tab that tmobile sold could in fact be flashed with the european modem to enable voice calls ( @oldblue910 ...i was gonna bring this to your attention in the other thread but due to the locked bootloader on the ATT version the info was almost irrelevent)! So with all of that said heres what i'm thinking...u MAY be able to flash the brazillian modem which makes calls and also has the north american lte frequencies! Although it would be less impressive...the international modem MAY enable calls with the obvious caveat being that u wouldnt be getting LTE speeds
Click to expand...
Click to collapse
No such luck.
I was looking at buying one on E-Bay UK and was trying to gather info before deciding to purchase. However there's now crazy (IMHO) bidders who have bid it up to over £300 ($480) so not worth the effort now, although whether they'll pay and whether they understand what they're really buying is of course another issue. Auction closes tomorrow on E-Bay UK and isn't too hard to find.
Sorry I can't be more helpful.

--

THEDEVIOUS1 said:
not sure what happended...thx for making me ware they were missing
the links have been fixed in the first post...thx for testing. i know its a lot but please be sure to read the ENTIRE op...long story short the file labeled USALTE705_NG1_MODEM.zip will in fact flash without problems and show the north american bands when u got to the network menu but still no LTE yet on my personal device (with any luck u will flash this and LTE will automagically work...proving that there is just something set up wrong on my device) The only other zip in the op that i believe to be significant is the lteon_netlist.zip which contains a whitelist of LTE carriers including the north american providers (if u check it against the stock file u will see that they are in fact missing)
l
Click to expand...
Click to collapse
I rooted my device and installed TWRP 2.8.1.0 I then flash the USALTE705_NG1_MODEM.zip which installed successfully. I inserted my T-Mobile SIM.
No LTE
I then accessed the Band configuration via the *#0011# code followed the instructions and selected the T-Mobile bands B4 & B17 in the LTE section. and WCDMA: 1900
No LTE
Next attempt was to copy the lteon_netlist.zip file to the system/etc folder and set the permission to 0644 or rw-r--r (note: this file did not exist prior to copying)
No LTE
What else should I try and am I missing anything else?

Related

WARNING: Remember: to stay lag-free, leave lots of free internal space!

(90% of the time the main cause of Android device lag is slow internal Flash memory!)
Lately, my Note had gotten laggy- apps were taking forever to open, Chrome was slow opening pages and things were just slow overall. Was it one of my kernel mods? Was it the DeOdexed ROM? I'd gone back to a stock kernel and switched back to a stock ROM, but it was still laggy. I'd turned on "Show CPU Usage" and sure enough, my Note was spending a LOT of time in "IOWait" (the blue bar) and the system was spending a lot of time running the process "mmcqd/0" (the kernel thread that runs the Flash memory). None of my troubleshooing worked and I couldn't figure it out 'till I did a "df" and discovered I'd made a newbie mistake- I'd had only 750MB remaining on /data (which also includes where the internal sdcard is located). Bingo!
For those who don't know, I'll give you the "TL;DR" lesson on Flash memories- the fuller they get, the slower they get.
A more-detailed explanation: the controller on a Flash device takes longer to find free space to write file data on as it gets fuller- the "erase size" is usually far bigger than the average size of a kernel write, so the Flash device's internal controller can't find enough empty flash blocks it has to do some time-consuming "Read-Erase-Write" operations, and when that happens (which can take many milliseconds and adds up quickly) no other I/O can happen on the flash device, so your Android device lags as your CPU helplessly sits there waiting for all the I/O to complete. Although we're using the "discard" option on our /data partition (which lets the Flash-memory controller know when Linux has removed a file, helping it keep more available empty blocks for later write operations), there's only so much that can be done when the percentage of free space falls below a certain point.
(OK, the following steps aren't for absolute newbies, and you have to be rooted- so the Standard XDA Disclaimer of "If you fsck this up, don't blame me!" applies here!)
So, I'd first determined where all the space was going (I used "cd /data ; du -kx | sort -rn | head"). In my case, it was a couple of cached Vudu movies, YouTube caching of my "Watch Later", a couple of movies that I hadn't moved to the SD-Card and the Samsung "Note Screensaver" and "Note Manual" apps. I also used TiBu to Integrate updates of my apps back to the ROM. All told, I'd freed up about 4GB.
Next, I ran "fstrim -v /data" to help the Flash memory controller reclaim the space internally. After a reboot (only necessary 'cause of the TiBu "Integrate to ROM"), Voila! Back to speed!
I've attached a zipped-up copy of my "fstrim" binary, and for those using my kernels (which I'll be updating soon as I've got some other goodies too) they'll now have automatic "fstrim" on bootup (BTW, the free version (at least) of "LagFree" app doesn't work on our Notes for some reason).
(TL;DR: keep your internal storage as free as possible, else everything slows down.)
Do I need root to do this?
I spent some time doing some file shuffling between my internal and external memory cards and freed about 3gb of stuff from the internal sd. Tablet is more responsive but I'd still like to be able to clear my cacbes.
Sent from my GT-N8013 using XDA Premium HD app
Temetka said:
Do I need root to do this?
Click to expand...
Click to collapse
Looks like your question was already answered.
kcrudup said:
(OK, the following steps aren't for absolute newbies, and you have to be rooted- so the Standard XDA Disclaimer of "If you fsck this up, don't blame me!" applies here!)
Click to expand...
Click to collapse
Yes it was.
In my defense I was very tired. Just chalk it to me being that guy who asked the obvious.
Sent from my GT-N8013 using XDA Premium HD app
Temetka said:
Just chalk it to me being that guy who asked the obvious
Click to expand...
Click to collapse
Ah, don't sweat it, we've all done it- "Let he of ye without sin ..." and all
But in the next few days (and against my better judgement ) I'll be putting out a series of boot.img files for the most popular ROMs out there (i.e., "the ones I've used"): the latest Samsung Official, Darkman's latest and AR HD's latest.
They'll have my latest OC and upgraded kernels, and my YouTube and "fstrim" mods and I'll update them fairly often.
Is there a non-ODIN method to install boot.img? If not can you make flashable zips?
This very reason is why i bought the 32 gb version.. Some with my nexus 7 and my phone 16 gb .... Its well worth the little bit of extra money .. But its awesome to have people here willing to help. I know on the nexus if you get it half full you will have very bad slow down and issues. This has been discussed over and over in the GOOGLE TECH FORUMS and some here on the xda nexus forum..
I think like with a windows pc . if you move around install and uninstall alot of software applications . You should once in a while wipe and re install the os .So for android devices Cloud storage is awesome.I use a ftp app that will sync to my ftp site once a week of the night time..
I can wipe my device restore from the ftp quick easy and no loss of data...
erica_renee said:
This very reason is why I bought the 32 GB version
Click to expand...
Click to collapse
Yeah, I looked everywhere for a GT-N8000 with 32GB, and apparently they don't make one.
I think like with a windows PC, if you move around, install and uninstall a lot of software applications you should once in a while wipe and re-install the os
Click to expand...
Click to collapse
Well, that's really apples-and-oranges here, though. All that matters to US is relative storage availability (and the "discard" mount flag to give the Flash device hints, which is turned on even in Stock kernels) so there's room for the device to re-arrange things. Based on the design of Android, wipes are really only necessary when an app (or an owner ...) misbehaves.
Remember, too, that most of our devices' OS is in read-only-memory and never changes, also invalidating the need to install.
Windows, on the other hand, is just a mess
kcrudup said:
Yeah, I looked everywhere for a GT-N8000 with 32GB, and apparently they don't make one.
Well, that's really apples-and-oranges here, though. All that matters to US is relative storage availability (and the "discard" mount flag to give the Flash device hints, which is turned on even in Stock kernels) so there's room for the device to re-arrange things. Based on the design of Android, wipes are really only necessary when an app (or an owner ...) misbehaves.
Remember, too, that most of our devices' OS is in read-only-memory and never changes, also invalidating the need to install.
Windows, on the other hand, is just a mess
Click to expand...
Click to collapse
That is true... OOPS and you might be right on the GT-N8000. I have n8013 wifi only tab. Could not find the 3g one within any reasonable price range i was willing to pay..
ohh Sometimes im a mess as well... but thats obvious huh?
Just sold my Galaxy Tab 10.1 and bought a note. My question is, how much space should the system and all the preinstalled apps/bloat take up? I bought a white 16GB and upon turning it on it shows I only have 11.66GB of total space and 11.09GB of free space. Applications are taking up 228MB, Audio is at 20KB, Misc is at 194MB. Does the system really take up almost 4.5GB? Seems like a whole lot.
Shouldn't the system show 16GB of total space? My SGS3 does. Why does the note show only 11.66GB os total space?
The Apostle said:
Does the system really take up almost 4.5GB?
Click to expand...
Click to collapse
Yes, it does.
Seems like a whole lot.
Click to expand...
Click to collapse
No, it isn't.
Shouldn't the system show 16GB of total space?
Click to expand...
Click to collapse
No, it shouldn't.
Regarding to memory space,
Titanium Backup shows me a 2.48 mb free out of 1.44 gb sys rom memory !!!
So, where is the 4.5 gb the rest of 16 gb ???
Sent from my GT-N8000 using xda premium
hatem 5000 said:
So, where is the 4.5 gb the rest of 16 gb
Click to expand...
Click to collapse
There are a LOT of partitions besides system/data/cache/boot/recovery you've got to consider, too:
Code:
$ adb shell cat /proc/partitions | fgrep mmcblk0
179 0 15388672 mmcblk0
179 1 4096 mmcblk0p1
179 2 4096 mmcblk0p2
179 3 20480 mmcblk0p3
179 4 8192 mmcblk0p4
179 5 8192 mmcblk0p5
179 6 8192 mmcblk0p6
179 7 32768 mmcblk0p7
179 8 819200 mmcblk0p8
179 9 1433600 mmcblk0p9
179 10 512000 mmcblk0p10
179 11 8192 mmcblk0p11
179 12 12521472 mmcblk0p12
179 32 2048 mmcblk0boot1
179 16 2048 mmcblk0boot0
$
... and here's a human-readable dump of the PIT file for the N8000:
Code:
--- Entry #0 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 80
Attributes: 2 (STL Read-Only)
Update Attributes: 1 (FOTA)
Partition Block Size: 0
Partition Block Count: 1734
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: BOOTLOADER
Flash Filename: sboot.bin
FOTA Filename:
--- Entry #1 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 81
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size: 1734
Partition Block Count: 312
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: TZSW
Flash Filename: tz.img
FOTA Filename:
--- Entry #2 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 70
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size: 34
Partition Block Count: 16
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: PIT
Flash Filename: note10.pit
FOTA Filename:
--- Entry #3 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 71
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size: 50
Partition Block Count: 2048
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: MD5HDR
Flash Filename: md5.img
FOTA Filename:
--- Entry #4 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 1
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size: 8192
Partition Block Count: 8192
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: BOTA0
Flash Filename: -
FOTA Filename:
--- Entry #5 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 2
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size: 16384
Partition Block Count: 8192
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: BOTA1
Flash Filename: -
FOTA Filename:
--- Entry #6 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 3
Attributes: 5 (Read/Write)
Update Attributes: 5 (FOTA)
Partition Block Size: 24576
Partition Block Count: 40960
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: EFS
Flash Filename: efs.img
FOTA Filename:
--- Entry #7 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 4
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size: 65536
Partition Block Count: 16384
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: PARAM
Flash Filename: param.bin
FOTA Filename:
--- Entry #8 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 5
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size: 81920
Partition Block Count: 16384
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: BOOT
Flash Filename: boot.img
FOTA Filename:
--- Entry #9 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 6
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size: 98304
Partition Block Count: 16384
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: RECOVERY
Flash Filename: recovery.img
FOTA Filename:
--- Entry #10 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 7
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size: 114688
Partition Block Count: 65536
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: RADIO
Flash Filename: modem.bin
FOTA Filename:
--- Entry #11 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 8
Attributes: 5 (Read/Write)
Update Attributes: 5 (FOTA)
Partition Block Size: 180224
Partition Block Count: 1638400
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: CACHE
Flash Filename: cache.img
FOTA Filename:
--- Entry #12 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 9
Attributes: 5 (Read/Write)
Update Attributes: 5 (FOTA)
Partition Block Size: 1818624
Partition Block Count: 2867200
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: SYSTEM
Flash Filename: system.img
FOTA Filename:
--- Entry #13 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 10
Attributes: 5 (Read/Write)
Update Attributes: 5 (FOTA)
Partition Block Size: 4685824
Partition Block Count: 1024000
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: HIDDEN
Flash Filename: hidden.img
FOTA Filename:
--- Entry #14 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 11
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size: 5709824
Partition Block Count: 16384
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: OTA
Flash Filename: -
FOTA Filename:
--- Entry #15 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 12
Attributes: 5 (Read/Write)
Update Attributes: 5 (FOTA)
Partition Block Size: 5726208
Partition Block Count: 0
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: USERDATA
Flash Filename: userdata.img
FOTA Filename: remained
kcrudup said:
Yes, it does.
No, it isn't.
No, it shouldn't.
Click to expand...
Click to collapse
Thsnk you but can anyone provide insight on why the 16GB note would show 11.66GB of total space and the GSIII would show 16GB of total space?
Sent From a far away Galaxy, in Missouri.
The Apostle said:
Thsnk you but can anyone provide insight on why the 16GB note would show 11.66GB of total space and the GSIII would show 16GB of total space?
Sent From a far away Galaxy, in Missouri.
Click to expand...
Click to collapse
My s3 shows 11.95 gb disk space available by the way! So its the same.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
The Apostle said:
Thsnk you but can anyone provide insight on why the 16GB note would show 11.66GB of total space and the GSIII would show 16GB of total space?
Sent From a far away Galaxy, in Missouri.
Click to expand...
Click to collapse
Every storage device has less than the advertised amount of space available. For example 1tb drives only have 965mb available.
Sent from the mighty Note II
dr.m0x said:
Every storage device has less than the advertised amount of space available. For example 1tb drives only have 965mb available
Click to expand...
Click to collapse
Actually, that particular difference is only due to difference in the definition of sizes; computer people like to think in terms of powers of 2, so a "Terabyte" to computer people is 2^30, or 1073741824 bytes. However, disk-drive manufacturers started using powers-of-10 "Terabytes" (1000000000) so they could legally claim a "Terabyte" (or "Megabyte", as the case may be) but short-change us by not meeting the computer-referenced version of same, so that same "1TiB" drive is really only 954 of the Megabytes that really count.
In the case of our Flash drives, the reason it's smaller than the 16GB (and it's a real "computer 16GB", 16777216 bytes) is because of what I'd stated above, partitioning of the drive into partitions we can't consider available for data storage.
kcrudup said:
Actually, that particular difference is only due to difference in the definition of sizes; computer people like to think in terms of powers of 2, so a "Terabyte" to computer people is 2^30, or 1073741824 bytes. However, disk-drive manufacturers started using powers-of-10 "Terabytes" (1000000000) so they could legally claim a "Terabyte" (or "Megabyte", as the case may be) but short-change us by not meeting the computer-referenced version of same, so that same "1TiB" drive is really only 954 of the Megabytes that really count.
In the case of our Flash drives, the reason it's smaller than the 16GB (and it's a real "computer 16GB", 16777216 bytes) is because of what I'd stated above, partitioning of the drive into partitions we can't consider available for data storage.
Click to expand...
Click to collapse
Well I'm still awake, but barely.
Sent from the mighty Note II

[INDEX][SGH-T599x][FIRMWARE]

UPDATED WITH SAMSUNG ORIGINAL FIRMWARE​
Hi SGH-T599 users!
I don't have this device myself, but a S3mini which is pretty much the same device.
Since no official firmwares is to be found yet, and @Unjustified Dev made CM10.1 and CWM I thought it would be good to make something for odin as an option to get back to stock.
These are reworked images taken from devices with dd-method.
Each tar contains boot.img, cache.img, system.img and recovery.img.
Boot and recovery repacked to be accual size. System and cache totaly repacked to sparse ext4-img files.
I also added supersu, su binary and busybox so these are pre-rooted
If you for some reason want to unroot, go to supersu settings and tick full unroot.
T599-Pre-rooted.zip - 600.17 MB
T599N-Pre-rooted.zip - 572.45 MB
T599V-Pre-rooted.zip - 579.90 MB
Included is also a zipped "modem.bin" If you messed up your modem you can get it flashed to device with Terminal Emulator.
Put "modem.bin" on your sdcard. In TM, type:
Code:
su
dd if=/sdcard/modem.bin of= dev/block/mmcblk0p16
OFFICIAL FIRMWARE​SGH-T599 HOME_T599UVAOH1_T599TMBAOH1_969628_REV00_user_low_ship<- Strange name. Home usually means no reset and REV00_user_low_ship is usually seen on full flash files with factory reset on flash. This one have both. Don't know if it resets or not.
SGH-T599V T599V_T599VYVLAME4_T599VVLAME4
SGH-T599N T599NUVAOH1_T599NTMBAOH1_T599NUVAOH1_HOME
"one-click-root" (works on s3mini so I think it works here as well)
Enable USB debug. View attachment VRoot_1.6.0.3689_english.zip
Otherwise cydiaimpactor is known to work.
Links to related threads which together made everything possible:
[ROM] [4.3.1] [OFFICIAL][Nightlies][Codinaxx Galaxy Exhibit T599X Variants]PAC-Man
[ROM][4.2.2.][UNOFFICIAL] CyanogenMod 10.1 for Galaxy Exhibits
[Recovery][CWM] SGH-T599- Working
[System, Boot & Recovery Dump][8-27-13] SGH-T599 (4.1.2) JZO54K.T599UVAMB5
If coming from CM or other custom rom, FIRST GO TO RECOVERY AND MAKE A FACTORY RESET
HOW TO FLASH:
Download Odin 3.04 and install samsung drivers.
Unzip downloaded firmware.
Open Odin, put phone in download mode (vol-/home/power).
Connect phone to computer, and place the *tar.md5 in PDA-box.
Make sure F-reset time and auto reboot is ticked. Press START.
Attached to this post you'll find a zipped wipe.tar for odin. Unzip and load as pda.
It's just empty cache and should work to break bootloops if you can't get to recovery.
Thanks to @Unjustified Dev @goldfingerfif @exothermic @DJVargas (sorry if I forgot someone) Just let me know and I'll add it.:good:
Reserved for flashable zips
SGH-T599V-deodex.zip - 337.80 MB Replace T599V system-apps and framework to de-odexed. Link to updater script
SGH-T599V GoogleBoot logo mod & back to stock zip's Thx to @Exothermic for testing!
Test for bootlogo mod - all SGH-T599 models.
Partitions & pit-files
Additional info.
Partition-table and file names.
Code:
SGH-T599:
/proc/partitions
major minor #blocks name
7 0 5229 loop0
179 0 3866624 mmcblk0
179 1 128 mmcblk0p1 - MBR,GPT
179 2 384 mmcblk0p2 - MasterTOC - STE_boot.bin
179 3 1024 mmcblk0p3 - codinavid.pit / codinatmo.pit
179 4 1024 mmcblk0p4 - md5.img
179 5 512 mmcblk0p5 - STE_boot1.img
179 6 512 mmcblk0p6 - STE_boot2.img
179 7 512 mmcblk0p7 - dnt.ssw
179 8 512 mmcblk0p8 - reserved
179 9 1024 mmcblk0p9 - cspsa.img
179 10 1024 mmcblk0p10 - cspsa2.img
179 11 16384 mmcblk0p11 - EFS.img
179 12 16384 mmcblk0p12 - modemfs.img
179 13 16384 mmcblk0p13 - modemfs2.img
179 14 51200 mmcblk0p14 - ssgtest.img
179 15 64 mmcblk0p15 - ipl.bin
179 16 14336 mmcblk0p16 - modem.bin
179 17 2048 mmcblk0p17 - normal.bin
179 18 2048 mmcblk0p18 - normal2.bin
179 19 16384 mmcblk0p19 - param.lfs
179 20 16384 mmcblk0p20 - boot.img
179 21 16384 mmcblk0p21 - recovery.img
179 22 1228800 mmcblk0p22 - system.img
179 23 737280 mmcblk0p23 - cache.img
179 24 102400 mmcblk0p24 - hidden.img
179 25 1535983 mmcblk0p25 - userdata.img
179 64 2048 mmcblk0boot1
179 32 2048 mmcblk0boot0
179 96 15637504 mmcblk1
179 97 15633408 mmcblk1p1
254 0 5229 dm-0
Analysis of codinavid.pit:
Code:
----------------------------------------------------------
PIT Magic v1.3.10 Copyright © Gaz 2012.
----------------------------------------------------------
Analysis for: codinavid.pit
----------------------------------------------------------
----------------------------------------------------------
<<< Pit File Start >>>
----------------------------------------------------------
----------------------------------------------------------
<<< PIT File Header Information >>>
----------------------------------------------------------
Header Magic: 0x12349876 (4 Bytes)
Entry Count: 25 (4 Bytes)
----------------------------------------------------------
Dummy Data #1 (In String and Hexadecimal Format):
----------------------------------------------------------
String: COM_
Hexadecimal: 434F4D5F
----------------------------------------------------------
Dummy Data #2 (In String and Hexadecimal Format):
----------------------------------------------------------
String: TAR2
Hexadecimal: 54415232
----------------------------------------------------------
Dummy Data #3 (In String and Hexadecimal Format):
----------------------------------------------------------
String: codi
Hexadecimal: 636F6469
----------------------------------------------------------
Dummy Data #4 (In String and Hexadecimal Format):
----------------------------------------------------------
String: na
Hexadecimal: 6E610000
----------------------------------------------------------
Dummy Data #5 (In String and Hexadecimal Format):
----------------------------------------------------------
String:
Hexadecimal: 00000000
----------------------------------------------------------
Dummy Data Length: (4 Bytes Per Block, 20 Bytes In Total.)
----------------------------------------------------------
Header Size: (28 Bytes)
----------------------------------------------------------
<<< PIT File Entries >>>
----------------------------------------------------------
----------------------------------------------------------
Entry Memory Address: 0x1C
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 1
Attribute: 2 (STL)
Update Attribute: 1 (FOTA)
Block Size:
Block Count: 256
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: MBR,GPT
Flash FileName:
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xA0
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 2
Attribute: 2 (STL)
Update Attribute: 1 (FOTA)
Block Size: 256
Block Count: 768
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: MasterTOC
Flash FileName: STE_boot.bin
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x124
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 70
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 1*024
Block Count: 2*048
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: PIT
Flash FileName: codinavid.pit
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x1A8
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 71
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 6*144
Block Count: 2*048
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: MD5HDR
Flash FileName: md5.img
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x22C
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 3
Attribute: 2 (STL)
Update Attribute: 1 (FOTA)
Block Size: 8*192
Block Count: 1*024
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: STEboot1
Flash FileName: STE_boot1.img
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x2B0
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 4
Attribute: 2 (STL)
Update Attribute: 1 (FOTA)
Block Size: 9*216
Block Count: 1*024
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: STEboot2
Flash FileName: STE_boot2.img
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x334
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 5
Attribute: 2 (STL)
Update Attribute: 1 (FOTA)
Block Size: 10*240
Block Count: 1*024
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: Dnt
Flash FileName: dnt.ssw
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x3B8
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 6
Attribute: 2 (STL)
Update Attribute: 1 (FOTA)
Block Size: 11*264
Block Count: 1*024
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: reserved
Flash FileName:
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x43C
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 7
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 16*384
Block Count: 2*048
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: CSPSAFS
Flash FileName: cspsa.img
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x4C0
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 8
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 18*432
Block Count: 2*048
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: CSPSAFS2
Flash FileName: cspsa2.img
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x544
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 9
Attribute: 5 (READ / WRITE)
Update Attribute: 5 (FOTA)
Block Size: 20*480
Block Count: 32*768
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: EFS
Flash FileName: EFS.img
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x5C8
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 10
Attribute: 5 (READ / WRITE)
Update Attribute: 5 (FOTA)
Block Size: 53*248
Block Count: 32*768
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: ModemFS
Flash FileName: modemfs.img
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x64C
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 11
Attribute: 5 (READ / WRITE)
Update Attribute: 5 (FOTA)
Block Size: 86*016
Block Count: 32*768
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: ModemFS2
Flash FileName: modemfs2.img
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x6D0
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 12
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 118*784
Block Count: 102*400
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: Fota
Flash FileName: ssgtest.img
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x754
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 13
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 380*928
Block Count: 128
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: IPL Modem
Flash FileName: ipl.bin
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x7D8
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 14
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 385*024
Block Count: 28*672
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: Modem
Flash FileName: modem.bin
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x85C
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 15
Attribute: 2 (STL)
Update Attribute: 1 (FOTA)
Block Size: 417*792
Block Count: 4*096
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: Loke4
Flash FileName: normal.bin
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x8E0
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 16
Attribute: 2 (STL)
Update Attribute: 1 (FOTA)
Block Size: 421*888
Block Count: 4*096
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: 2ndLoke4
Flash FileName: normal2.bin
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x964
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 17
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 425*984
Block Count: 32*768
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: PARAM
Flash FileName: param.lfs
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x9E8
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 18
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 458*752
Block Count: 32*768
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: Kernel
Flash FileName: boot.img
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xA6C
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 19
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 491*520
Block Count: 32*768
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: Kernel2
Flash FileName: recovery.img
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xAF0
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 20
Attribute: 5 (READ / WRITE)
Update Attribute: 5 (FOTA)
Block Size: 524*288
Block Count: 2*457*600
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: SYSTEM
Flash FileName: system.img
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xB74
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 21
Attribute: 5 (READ / WRITE)
Update Attribute: 5 (FOTA)
Block Size: 2*981*888
Block Count: 1*474*560
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: CACHEFS
Flash FileName: cache.img
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xBF8
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 22
Attribute: 5 (READ / WRITE)
Update Attribute: 5 (FOTA)
Block Size: 4*456*448
Block Count: 204*800
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: HIDDEN
Flash FileName: hidden.img
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xC7C
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 23
Attribute: 5 (READ / WRITE)
Update Attribute: 5 (FOTA)
Block Size: 4*661*248
Block Count:
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: DATAFS
Flash FileName: userdata.img
FOTA FileName: remained
----------------------------------------------------------
<<< Pit File End >>>
----------------------------------------------------------
Unzip and load in Odin [Pit]
Awesome Job! Thank you as well to @tys0n @Unjustified Dev @goldfingerfif @Exothermic and anyone else who made this possible. Glad you got your thread up.
Sent from my SGH-T599N using Tapatalk
I can also use the recovery to the original rom from s3mini?
Gesendet von meinem GT-I8190 mit Tapatalk
jony1512 said:
I can also use the recovery to the original rom from s3mini?
Gesendet von meinem GT-I8190 mit Tapatalk
Click to expand...
Click to collapse
No you can't. They are very much alike and share same partition layout but s3mini recovery will give you nothing but bootloop. Thats also one of the reason I started this "odin-project" for T599 in the first place.
What's wrong with T599 recovery?
tys0n said:
No you can't. They are very much alike and share same partition layout but s3mini recovery will give you nothing but bootloop. Thats also one of the reason I started this "odin-project" for T599 in the first place.
What's wrong with T599 recovery?
Click to expand...
Click to collapse
ok thanks in advance for the answer. I wanted to have the recovery system as I have read that the recovery system and the menu has rwecovery of the Phil3759. or because I've now read something wrong? sorry my english is not so good. I had to make in order to use the recovery system?
thanks
Sent from my SGH-T599N using xda app-developers app
Can we flash it too? (GT-I8190)
Sent from my GT-I8190 using xda app-developers app
jony1512 said:
ok thanks in advance for the answer. I wanted to have the recovery system as I have read that the recovery system and the menu has rwecovery of the Phil3759. or because I've now read something wrong? sorry my english is not so good. I had to make in order to use the recovery system?
Click to expand...
Click to collapse
klopp-o-mat said:
Can we flash it too? (GT-I8190)
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
I wish we had phils recovery too, but these files are for T-599 only.
tys0n said:
I wish we had phils recovery too, but these files are for T-599 only.
Click to expand...
Click to collapse
if that is not for the mini s3, I do not understand why this will be posted in s3 mini forum. I'm now even after everything had asked because I like the recovery system of Phils.
Gesendet von meinem GT-I8190 mit Tapatalk
jony1512 said:
if that is not for the mini s3, I do not understand why this will be posted in s3 mini forum. I'm now even after everything had asked because I like the recovery system of Phils.
Gesendet von meinem GT-I8190 mit Tapatalk
Click to expand...
Click to collapse
It's in s3 mini forum because it's built on the same board and got same partition layout. It doesn't have it's own forum..at least not yet, and because it's the US version of s3mini with only a few differences.
tys0n said:
It's in s3 mini forum because it's built on the same board and got same partition layout. It doesn't have it's own forum..at least not yet, and because it's the US version of s3mini with only a few differences.
Click to expand...
Click to collapse
okay now I understand all that thank you for your help. wiessen they might ask if you could do the mini for the s3 can build the recovery system of Phils. I would try it myself but I have no stable internet connection and I am not familiar with Ubuntu.
Gesendet von meinem GT-I8190 mit Tapatalk
jony1512 said:
okay now I understand all that thank you for your help. wiessen they might ask if you could do the mini for the s3 can build the recovery system of Phils. I would try it myself but I have no stable internet connection and I am not familiar with Ubuntu.
Gesendet von meinem GT-I8190 mit Tapatalk
Click to expand...
Click to collapse
I'm not the one to do it, but instructions on how to get it done is in Phil's main thread for his recovery. Scroll down to post#2. [18.10.2013]CWM 6.0.4.4 Advanced Edition / PhilZ Touch 5.18.5 + exFAT + NTFS
Thank you so much! This is exactly what I needed.
iAmWillJ91 said:
Thank you so much! This is exactly what I needed.
Click to expand...
Click to collapse
You're welcome Glad you found it.
tys0n said:
I'm not the one to do it, but instructions on how to get it done is in Phil's main thread for his recovery. Scroll down to post#2. [18.10.2013]CWM 6.0.4.4 Advanced Edition / PhilZ Touch 5.18.5 + exFAT + NTFS
Click to expand...
Click to collapse
I try my luck've just seen this applies also for Windows. I've just looked at the time of Phil's git I've got to ask a times I think of the mini s3 DEVICE_CONFIG out or where to get something to read?
Gesendet von meinem GT-I8190 mit Tapatalk
jony1512 said:
okay now I understand all that thank you for your help. wiessen they might ask if you could do the mini for the s3 can build the recovery system of Phils. I would try it myself but I have no stable internet connection and I am not familiar with Ubuntu.
Gesendet von meinem GT-I8190 mit Tapatalk
Click to expand...
Click to collapse
I'll try to port it
Sent from my SCH-I535 using Tapatalk
@tys0n I need a stock recovery image. Good thing is our ramdisk is exactly the same. All I need to do is change kernel.
Sent from my SCH-I535 using Tapatalk
Unjustified Dev said:
@tys0n I need a stock recovery image. Good thing is our ramdisk is exactly the same. All I need to do is change kernel.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Here's i8190_Stock_recovery.img
I'll be happy to test it, and thanks in advance

[FIRMWARE] AT&T Galaxy Note 3 N900A UNEXE STOCK + Analysis PIT + EFS BACKUP

Hi guys!
As you know, flashing of the older firmware is not possible because of the boot secure into bootloader.
But there is a way to downgrade the firmware without flashing bootloader that can't be to downgrade. But unfortunately it will increase the value KNOX WARRANTY BIT 0x1.
So I extracted parts of the firmware for your convenience and an opportunity to downgrade or flashing individual parts of stock firmware..
AP = Android Platform
BL = Bootloader
CP = Modem (radio)
CSC = Region & mobile operator
pit = Partition table
Download:
N900AUCUBMI1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
***​
N900AUCUBMI9
N900AUCUBMJ5 - without system
Special tnx designgears for OneClick.exe
How to flash:
----------------------------------------------------------
PIT Magic - Analysis for: HLTE_USA_ATT_32G.pit
----------------------------------------------------------
Code:
<<< Pit File Start >>>
----------------------------------------------------------
<<< Unknown PIT File Properties >>>
----------------------------------------------------------
Entry Count: 29
Unknown 1: 1598902083
Unknown 2: 844251476
Unknown 3: 21325
Unknown 4: 14413
Unknown 5: 14137
Unknown 6: 52
Unknown 7: 0
Unknown 8: 0
----------------------------------------------------------
<<< PIT File Entries >>>
----------------------------------------------------------
----------------------------------------------------------
Entry Memory Address: 0x1C
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 1
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 8*192
Block Count: 30*720
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: APNHLOS
Flash FileName: NON-HLOS.bin
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xA0
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 2
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 38*912
Block Count: 117*632
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: MODEM
Flash FileName: modem.bin
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x124
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 3
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 156*544
Block Count: 1*024
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: SBL1
Flash FileName: sbl1.mbn
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x1A8
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 4
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 157*568
Block Count: 64
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: DBI
Flash FileName: sdi.mbn
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x22C
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 5
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 157*632
Block Count: 64
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: DDR
Flash FileName:
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x2B0
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 6
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 157*696
Block Count: 4*096
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: ABOOT
Flash FileName: aboot.mbn
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x334
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 7
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 161*792
Block Count: 1*024
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: RPM
Flash FileName: rpm.mbn
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x3B8
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 8
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 162*816
Block Count: 1*024
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: TZ
Flash FileName: tz.mbn
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x43C
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 9
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 163*840
Block Count: 20*480
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: PAD
Flash FileName:
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x4C0
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 10
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 184*320
Block Count: 20*480
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: PARAM
Flash FileName: param.bin
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x544
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 11
Attribute: 5 (READ / WRITE)
Update Attribute: 5 (FOTA)
Block Size: 204*800
Block Count: 28*672
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: EFS
Flash FileName: efs.img.ext4
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x5C8
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 12
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 233*472
Block Count: 6*144
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: MODEMST1
Flash FileName: nvrebuild1.bin
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x64C
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 13
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 239*616
Block Count: 6*144
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: MODEMST2
Flash FileName: nvrebuild2.bin
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x6D0
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 14
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 245*760
Block Count: 22*528
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: BOOT
Flash FileName: boot.img
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x754
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 15
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 268*288
Block Count: 26*624
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: RECOVERY
Flash FileName: recovery.img
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x7D8
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 16
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 294*912
Block Count: 26*624
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: FOTA
Flash FileName:
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x85C
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 17
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 321*536
Block Count: 14*318
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: BACKUP
Flash FileName:
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x8E0
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 18
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 335*854
Block Count: 6*144
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: FSG
Flash FileName:
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x964
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 19
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 341*998
Block Count: 2
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: FSC
Flash FileName:
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x9E8
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 20
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 342*000
Block Count: 16
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: SSD
Flash FileName:
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xA6C
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 21
Attribute: 5 (READ / WRITE)
Update Attribute: 5 (FOTA)
Block Size: 342*016
Block Count: 16*384
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: PERSIST
Flash FileName: persist.img.ext4
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xAF0
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 22
Attribute: 5 (READ / WRITE)
Update Attribute: 5 (FOTA)
Block Size: 358*400
Block Count: 18*432
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: PERSDATA
Flash FileName: persdata.img.ext4
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xB74
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 23
Attribute: 5 (READ / WRITE)
Update Attribute: 5 (FOTA)
Block Size: 376*832
Block Count: 5*122*048
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: SYSTEM
Flash FileName: system.img.ext4
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xBF8
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 24
Attribute: 5 (READ / WRITE)
Update Attribute: 5 (FOTA)
Block Size: 5*498*880
Block Count: 1*024*000
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: CACHE
Flash FileName: cache.img.ext4
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xC7C
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 25
Attribute: 5 (READ / WRITE)
Update Attribute: 5 (FOTA)
Block Size: 6*522*880
Block Count:
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: USERDATA
Flash FileName: userdata.img.ext4
FOTA FileName: remained
----------------------------------------------------------
Entry Memory Address: 0xD00
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 70
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size:
Block Count: 34
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: PGPT
Flash FileName: pgpt.img
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xD84
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 71
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 34
Block Count: 16
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: PIT
Flash FileName: MSM8974.pit
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xE08
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 72
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 50
Block Count: 32
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: MD5
Flash FileName: md5.img
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xE8C
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 73
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 61*071*327
Block Count: 33
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: SGPT
Flash FileName: sgpt.img
FOTA FileName:
----------------------------------------------------------
<<< Pit File End >>>
----------------------------------------------------------
A.S._id said:
Added N900AUCUBMI9
Click to expand...
Click to collapse
I can used this in odin ????
SAMSUNG AT&T Galaxy Note 3 N900A EFS BACKUP/RESTORE
Instructions:
! Need for backup Root access and debugging USB
1. Extract from the zip and run .bat file
2. Is okay to your PC and follow the menu
Automatically create a text file of all the parameters of the device at the time of the copy
Automatic backup of efs:
* Odin flash file -. tar.md5,
* dd copy - raw.img
* tar.gz archive (need busybox)
Automatic naming of files and backup archive version of the firmware
Restore to choose from archives and backup images
Automatic start of Odin and the transition to the flashing mode when selecting Odin Restore
A.S._id said:
Of course
Click to expand...
Click to collapse
Bootloader is not been unlocked yet?
fern1221 said:
Bootloader is not been unlocked yet?
Click to expand...
Click to collapse
it's impossible - downgrade bootloader, only flash without it..
So does this mean we can now get a recovery and thus flash away. Maybe I'm not understanding what's happening here. Please go easy on me fellas.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
androidmechanic said:
So does this mean we can now get a recovery and thus flash away. Maybe I'm not understanding what's happening here. Please go easy on me fellas.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Now you can all...
You can extract any part to package into tar and flash it... but not bootloader
You can extract recovery.img, change stock recovery on cwm
You can extract system.img via dsixda kitchen and build custom zip...
You can analysis pit file and will know partition table for backup efs...
And more different things...
May be this thread better to move into development part
there she probably would have been more useful
A.S._id said:
Now you can all...
You can extract any part to package into tar and flash it... but not bootloader
You can extract recovery.img, change stock recovery on cwm
You can extract system.img via dsixda kitchen and build custom zip...
You can analysis pit file and will know partition table for backup efs...
And more different things...
May be this thread better to move into development part
there she probably would have been more useful
Click to expand...
Click to collapse
A.S., it sounds to me as you started an era of possible custom ROMs development for our N900A. Am I right?
The question I have since the first day with my phone is if it would be possible to flash the stock ROM of the N9005 (international version of the Note3) in this N900A variant. I do not use the phone in the AT&T network and would love to get rid of all AT&T stuff.
Even having the booloader locket, would this method let us able to do that?
Thanks!
cabtouch said:
A.S., it sounds to me as you started an era of possible custom ROMs development for our N900A. Am I right?
The question I have since the first day with my phone is if it would be possible to flash the stock ROM of the N9005 (international version of the Note3) in this N900A variant. I do not use the phone in the AT&T network and would love to get rid of all AT&T stuff.
Even having the booloader locket, would this method let us able to do that?
Thanks!
Click to expand...
Click to collapse
No, I'm hasn't n900a, but has n900 (exinos octa) and don't wanna to experiment with n900a...
To me was interesting to see firmware n900a, but don't find it.
So I extracted this from oneclickbin.exe and uploaded for users...
Would totally like to see what Designgears thinks of all this!
Can someone please extract the following files for me please
System/lib:
libaudio-ril.so
libreference-ril.so
libril.so
libril-qcril-hook-oem.so
librilutils.so
libsec-ril.so
libsecril-client.so
Need these files to make a flashable ril for tmob note 3 device for use in att.
More info http://forum.xda-developers.com/showthread.php?p=46995808#post46995808
Thanks
Pikezer1337 said:
Would totally like to see what Designgears thinks of all this!
Click to expand...
Click to collapse
But what hi can to say?
I'm extract this OneClick.exe without any scripts or bats on my UBUNTU 13.04 via Okteta hex editor...
p.s. I asked his, how to extract firmware from .exe before relise his .bat, but he don't answer me, so I myself had to think how to do it...
aalupatti said:
Can someone please extract the following files for me please
System/lib:
libaudio-ril.so
libreference-ril.so
libril.so
libril-qcril-hook-oem.so
librilutils.so
libsec-ril.so
libsecril-client.so
Need these files to make a flashable ril for tmob note 3 device for use in att.
More info http://forum.xda-developers.com/showthread.php?p=46995808#post46995808
Thanks
Click to expand...
Click to collapse
HERE
A.S._id said:
But what hi can to say?
I'm extract this OneClick.exe without any scripts or bats on my UBUNTU 13.04 via Okteta hex editor...
p.s. I asked his, how to extract firmware from .exe before relise his .bat, but he don't answer me, so I myself had to think how to do it...
Click to expand...
Click to collapse
No sorry I phrased that wrong. I didnt mean that you stole his work I meant I wanted to see if maybe he could get something with the bootloader going from this. You have done great work and hopefully some roms can come from this.
A.S._id said:
HERE
Click to expand...
Click to collapse
Thank yo so much for the files.
A.S._id said:
HERE
Click to expand...
Click to collapse
Is it safe to flash the modem files onto a tmobile device or am i goingn to end up with a brick ?
so can I use this to completely return to factory without triggering anything?
can anyone confirm the backup in post 3 works ok?
Thanks.
Hardcore!
Hehe, I use a hex editor on windows to do the same. However, there is a tool I use to do it now, its called exodin.
I have also downgraded with the older firmware exe and never tripped knox. As did many others with the original root method.

Problem in changing the partition layout of the internal MMC SD card

I have a Nexus S 9023 fresh of bootloader unlocking becasue I want to solve a limitation due to the storage available for the installable apps (i.e. the /data partion). I know there are apps like App2SD or Link2SD but I want to follow another cleaner solution.
So I unlocked the bootloader and ran the cyanogenrecovery.20140922.crespo.img recovery to try repartitioning the SD card. On the host system connected to the Nexus S with an USB cable:
Code:
adb reboot bootloader
fastboot boot cyanogenrecovery.20140922.crespo.img
As you probably know the internal SD card (i.e. MMC flash) has three partitions with the following layout:
Code:
~ # parted /dev/block/mmcblk0
GNU Parted 1.8.8.1.179-aef3
Using /dev/block/mmcblk0
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) p
p
Model: MMC SEM16G (sd/mmc)
Disk /dev/block/mmcblk0: 15.9GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 538MB 537MB ext4 system
2 538MB 1612MB 1074MB ext4 userdata
3 1612MB 15.9GB 14.3GB fat32 media
After a few commands using the parted utility
Code:
~ # parted /dev/block/mmcblk0
GNU Parted 1.8.8.1.179-aef3
Using /dev/block/mmcblk0
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted)
(parted) rm 2
rm 2
(parted) rm 3
rm 3
(parted) mkpart primary ext4 538MB 3098MB
mkpart primary ext4 538MB 3098MB
(parted) name 2 userdata
name 2 userdata
(parted) mkpart primary fat32 3098MB 100%
mkpart primary fat32 3098MB 100%
(parted) name 3 media
name 3 media
(parted) p
p
Model: MMC SEM16G (sd/mmc)
Disk /dev/block/mmcblk0: 15.9GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 538MB 537MB ext4 system
2 538MB 3098MB 2560MB ext4 userdata
3 3098MB 15.9GB 12.8GB fat32 media msftres
I successfully managed to change the layout of the disk:
Code:
~ # cd /dev/block/platform/s3c-sdhci.0/
/dev/block/platform/s3c-sdhci.0/by-name # ln -s /dev/block/mmcblk0p1 system
/dev/block/platform/s3c-sdhci.0/by-name # ln -s /dev/block/mmcblk0p2 userdata
/dev/block/platform/s3c-sdhci.0/by-name # ln -s /dev/block/mmcblk0p3 media
/dev/block/platform/s3c-sdhci.0/by-name # df -h
Filesystem Size Used Available Use% Mounted on
tmpfs 193.1M 136.0K 193.0M 0% /dev
tmpfs 193.1M 12.0K 193.1M 0% /tmp
tmpfs 193.1M 0 193.1M 0% /storage
tmpfs 193.1M 0 193.1M 0% /mnt/secure
tmpfs 193.1M 0 193.1M 0% /mnt/fuse
/dev/block/mtdblock4 469.5M 2.3M 467.2M 0% /cache
/dev/block/vold/179:3
11.9G 1.0G 10.9G 8% /storage/sdcard0
/dev/block/platform/s3c-sdhci.0/by-name/userdata
2.3G 132.0M 2.1G 6% /data
Up to here everthing looks fine.... So where it he problem? As soon as I reboot the partition layout is lost :crying: (this already happens in the recovery boot without booting the system regularly).
What am I doing wrong? Is the bootloader a supervisor of the partition layout correcting any difference comparing to a predefined value? If I try to boot the system I am asked about a password to decrypt the data partition, I guess Android doesn't find any useful file in the data partition so it thinks the partition is crypted
shouldnt you flash the custom recovery for that type of partitioning?
Sent from my Nexus S using XDA Premium 4 mobile app
g33k0 b3lk0w said:
shouldnt you flash the custom recovery for that type of partitioning?
Click to expand...
Click to collapse
First of all the procedure with Clockworkmod recovery doesn't work. Nevertheless that procedure is not what I want to obtain. because the partitioning done with CWM would divide the original FAT32 partition in two parts, the first will be dedicated to Link2SD or similar apps (so it will be an ext4) and the second to the FAT32 partition. In this way the partition layout would be:
Code:
/dev/block/mmcblk0 -> system partiotion
/dev/block/mmcblk1 -> userdata partition
/dev/block/mmcblk2 -> additional userdata partition for Link2SD or similar apps
/dev/block/mmcblk3 -> FAT32 partition
I don't see the reason in using 2 userdata partions + LinkSD when it's clearly easier to just enlarge the /dev/block/mmcblk1 partition. Moreover this solution preserves the size of the system partition but eventually I want to increase also that (for instance CM11 + gapps need more space).
I even tried chaning only the original FAT32 partition mimicking the 4 partition layout described above but as soon as I reboot I loose the changes. I suspect the problem is due to the bootloader which checks the partion layout during boot and restores the PIT
@efferre
Have you seen this? I have managed to manipulate succesfully around the nexus s storage. I am going to upload the latest cm11 m12 rom in the next couple of days.
KreAch3R said:
Have you seen this? I have managed to manipulate succesfully around the nexus s storage. I am going to upload the latest cm11 m12 rom in the next couple of days.
Click to expand...
Click to collapse
Yes, I have seen your post but I haven't tried yet that solution up to now. I prefer keeping the things simple
As the partition layout on the eMMC is using the new GPT standard (besides the MBR), I have also tried with gdisk (after having crosscompiled for ARM), a tool which is GPT-aware. Same result
Last step, I want to play with the PIT data. I have found heimdall which is capable to dump PIT data and later write back a modified version as done here using PITMagic.
Here is the PIT dump I get after putting the phone in download mode:
Code:
heimdall print-pit --file i9023.pit.orig
Heimdall v1.4.1
Copyright (c) 2010-2014 Benjamin Dobell, Glass Echidna
http://www.glassechidna.com.au/
This software is provided free of charge. Copying and redistribution is
encouraged.
If you appreciate this software and you would like to support future
development please consider donating:
http://www.glassechidna.com.au/donate/
Entry Count: 16
Unknown 1: 0
Unknown 2: 0
Unknown 3: 0
Unknown 4: 0
Unknown 5: 0
Unknown 6: 0
Unknown 7: 0
Unknown 8: 0
--- Entry #0 ---
Binary Type: 0 (AP)
Device Type: 0 (OneNAND)
Identifier: 0
Attributes: 0 (Read-Only)
Update Attributes: 0
Partition Block Size/Offset: 256
Partition Block Count: 1
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: IPBL
Flash Filename: bootloader.img
FOTA Filename:
--- Entry #1 ---
Binary Type: 0 (AP)
Device Type: 0 (OneNAND)
Identifier: 1
Attributes: 0 (Read-Only)
Update Attributes: 0
Partition Block Size/Offset: 256
Partition Block Count: 7
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: SBL
Flash Filename:
FOTA Filename:
--- Entry #2 ---
Binary Type: 0 (AP)
Device Type: 0 (OneNAND)
Identifier: 2
Attributes: 0 (Read-Only)
Update Attributes: 0
Partition Block Size/Offset: 256
Partition Block Count: 7
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: SBL2
Flash Filename:
FOTA Filename:
--- Entry #3 ---
Binary Type: 0 (AP)
Device Type: 0 (OneNAND)
Identifier: 3
Attributes: 0 (Read-Only)
Update Attributes: 0
Partition Block Size/Offset: 256
Partition Block Count: 4
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: PARAM
Flash Filename:
FOTA Filename:
--- Entry #4 ---
Binary Type: 0 (AP)
Device Type: 0 (OneNAND)
Identifier: 4
Attributes: 0 (Read-Only)
Update Attributes: 0
Partition Block Size/Offset: 256
Partition Block Count: 5
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: MISC
Flash Filename:
FOTA Filename:
--- Entry #5 ---
Binary Type: 0 (AP)
Device Type: 0 (OneNAND)
Identifier: 5
Attributes: 0 (Read-Only)
Update Attributes: 0
Partition Block Size/Offset: 256
Partition Block Count: 32
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: BOOT
Flash Filename: boot.img
FOTA Filename:
--- Entry #6 ---
Binary Type: 0 (AP)
Device Type: 0 (OneNAND)
Identifier: 6
Attributes: 0 (Read-Only)
Update Attributes: 0
Partition Block Size/Offset: 256
Partition Block Count: 32
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: RECOVERY
Flash Filename: recovery.img
FOTA Filename:
--- Entry #7 ---
Binary Type: 0 (AP)
Device Type: 0 (OneNAND)
Identifier: 7
Attributes: 1 (Read/Write)
Update Attributes: 0
Partition Block Size/Offset: 256
Partition Block Count: 1878
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: CACHE
Flash Filename: cache.img
FOTA Filename:
--- Entry #8 ---
Binary Type: 1 (CP)
Device Type: 0 (OneNAND)
Identifier: 8
Attributes: 0 (Read-Only)
Update Attributes: 0
Partition Block Size/Offset: 256
Partition Block Count: 54
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: RADIO
Flash Filename: radio.img
FOTA Filename:
--- Entry #9 ---
Binary Type: 0 (AP)
Device Type: 0 (OneNAND)
Identifier: 9
Attributes: 1 (Read/Write)
Update Attributes: 0
Partition Block Size/Offset: 256
Partition Block Count: 27
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: EFS
Flash Filename:
FOTA Filename:
--- Entry #10 ---
Binary Type: 0 (AP)
Device Type: 0 (OneNAND)
Identifier: 10
Attributes: 0 (Read-Only)
Update Attributes: 0
Partition Block Size/Offset: 256
Partition Block Count: 1
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: DGS
Flash Filename: dgs.img
FOTA Filename:
--- Entry #11 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 0
Attributes: 2 (STL Read-Only)
Update Attributes: 0
Partition Block Size/Offset: 512
Partition Block Count: 2048
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: PGPT
Flash Filename: emmc.img
FOTA Filename:
--- Entry #12 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 1
Attributes: 2 (STL Read-Only)
Update Attributes: 0
Partition Block Size/Offset: 512
Partition Block Count: 1048576
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: SYSTEM
Flash Filename: system.img
FOTA Filename:
--- Entry #13 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 2
Attributes: 2 (STL Read-Only)
Update Attributes: 0
Partition Block Size/Offset: 512
Partition Block Count: 2097152
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: USERDATA
Flash Filename: userdata.img
FOTA Filename:
--- Entry #14 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 3
Attributes: 2 (STL Read-Only)
Update Attributes: 0
Partition Block Size/Offset: 512
Partition Block Count: 33554432
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: MEDIA
Flash Filename: media.img
FOTA Filename:
--- Entry #15 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 4
Attributes: 2 (STL Read-Only)
Update Attributes: 0
Partition Block Size/Offset: 512
Partition Block Count: 33
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: SGPT
Flash Filename:
FOTA Filename:
but I have a few doubts:
can I write back the modified PIT (on the eMMC part) without having to flash back the OneNand parts (i.e. the repartitioning is touching only the modified parts of the PIT, in my case only the eMMC)?
after looking at the PIT sections, in particular at #14, I see a discrepancy because it says that the size of the MEDIA partition is more than 17GB which is of course not possible because the whole eMMC is only 16GB (I have opened a ticket for @benjamin)
This is exactly what I wanted to do on my phone, but I don't have too much spare time at the moment to experiment with it.
It's a bad news that it doesn't seem to work (my original idea was to follow this approach: http://forum.xda-developers.com/xperia-s/s-development/tutorial-increase-data-partition-t2821058 ). That tutorial says that "you have to re-flash your rom", did you re-flash it after re-partitioning the drive?
@efferre
Unfortunately, this is too low level for me. I have never messed around with partitions besides the normal PC formatting stuff. I just wanted to let you know that you can re-partition your Nexus S however you want using lvm. I have a very functional Nexus S with a combined 16GB storage (just like the newer smartphones) without any loss of performance (at least with my usage).
Good luck with your endeavors!
ekerazha said:
That tutorial says that "you have to re-flash your rom", did you re-flash it after re-partitioning the drive?
Click to expand...
Click to collapse
I don't think the flashing of the ROM changes the PIT and that procedure you pointed is for a Sony Xperia S device (i.e. not Samsung so I don't know if it has even a PIT), I think the reflashing is mandatory only when you change the /system partition.
Out of curiosity I have retested again the procedure changing the partition table with gdisk in recovery mode and, during the same session, uploading cm-10.2.1-crespo.zip with adb sideload. After the reboot the old partition table is recovered to the original values. The data in the media partition have not been touched, only the partition layout is changed by the bootloader.
Looking at the R880 source, the SBL is playing with the partition table so I'm pretty convinced that I need to upgrade the PIT, probably it's only necessary to change the PIT itself and the bootloader will change the partition layout for me
The next step would be to use heimdall to change the PIT but, as written above, I have a doubt of the data it reports dumping the current PIT so I want to wait for Benjamin's comment about the correctness of the dumped PIT data (do you know if it's possible to get the PIT with Odin for a comparison?) and some details the procedure heimdall follows.
For completeness, from the PIT acquired with heimdall, here is the calculated layout of the eMMC memory:
Code:
entry start stop size
11 0 1048575 1048576 (1 MiB)
12 1048576 537919487 536870912 (512 MiB)
13 537919488 1611661311 1073741824 (1 GiB)
14 1611661312 18791530495 17179869184 (16 GiB) ?????
15 18791530496 18791547391 16896 (16.5 kiB)
while this is the layout returned by gdisk:
Code:
~ # sgdisk -p /dev/block/mmcblk0
Disk /dev/block/mmcblk0: 31105024 sectors, 14.8 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 52444E41-494F-2044-4D4D-43204449534B
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 31104990
Partitions will be aligned on 2048-sector boundaries
Total free space is 2014 sectors (1007.0 KiB)
Number Start (sector) End (sector) Size Code Name
1 2048 1050623 512.0 MiB 0700 system
2 1050624 3147775 1024.0 MiB 0700 userdata
3 3147776 31104990 13.3 GiB 0700 media
As you can see there is a discrepancy in the media partition size (14th entry of the PIT).
I thought the same approach used for the Xperia S would also work on the Nexus S. Unfortunately, I don't have any experience with this "PIT" and I never really used Odin as I always flashed everything through fastboot (the Nexus way).
ekerazha said:
I thought the same approach used for the Xperia S would also work on the Nexus S. Unfortunately, I don't have any experience with this "PIT" and I never really used Odin as I always flashed everything through fastboot (the Nexus way).
Click to expand...
Click to collapse
Yes, me too, up to now I have always used fastboot to flash images. I'm afraid of screwing up the device following other procedure so I want to be 100% before trying anything with heimdall.
PIT is the acronym of Partition Information Table, it's something typical of Samsung devices and it is somewhere hidden in the flash (more information in this thread). For instance for the Galaxy Nexus I have found some code here which references to its structure and location but nothing specific for the Nexus S.
Let me know if you can manage to change the partition layout without using LVM

Bricked A500FU after reboot nvbackup

Hi.
So stupidly I used an adb command that wasn't supposed to be used on my device.
While trying to make a backup of the IMEI I used adb reboot nvbackup.
After that the phone is in endless bootloops.
Already tried to restores software with kies and nothing.
If someone could help me about fixing it with Odin I would be grateful.
rmrbpt said:
Hi.
So stupidly I used an adb command that wasn't supposed to be used on my device.
While trying to make a backup of the IMEI I used adb reboot nvbackup.
After that the phone is in endless bootloops.
Already tried to restores software with kies and nothing.
If someone could help me about fixing it with Odin I would be grateful.
Click to expand...
Click to collapse
Just download latest firmware and flash with odin. If it won't work, then try with 4-file firmware.
I'm going to try flashing stock with ODIN. I already found the correct version for my phone.
About the emergency firmware.
The 4 file recovery software that I finf is only 4.4.4 and my phone already had 6.0.1.
Can flashing this older software brick it?
rmrbpt said:
I'm going to try flashing stock with ODIN. I already found the correct version for my phone.
About the emergency firmware.
The 4 file recovery software that I finf is only 4.4.4 and my phone already had 6.0.1.
Can flashing this older software brick it?
Click to expand...
Click to collapse
Have you tried odin yet?
For the 4-file you'll have to get a 6..0.1. Any specific country/carrier you need? I can try to find it.
Unfortunately I can only try it tomorrow.
I tried to find the 4 file firmware for 6.0.1 but still nothing...
My phone is an SM-500FU with no carrier from Portugal so TPH is the firmware I need.
Thanks for your help.
rmrbpt said:
Unfortunately I can only try it tomorrow.
I tried to find the 4 file firmware for 6.0.1 but still nothing...
My phone is an SM-500FU with no carrier from Portugal so TPH is the firmware I need.
Thanks for your help.
Click to expand...
Click to collapse
I got the 4-file for 6.0.1 TPH in case you'll need it.
A500FUXXS1CQC4_FUXXU1CPH3A_FUOXX1CPH1-6.0.1- [4-File].zip
I'm trying this this afternoon.
Big thanks for the file! Searched the whole web and couldn't find it.
So I tried it with only 1 file and after that with the 4 files and still nothing.
To try the "repartition" option on ODIN I need a PIT file right?
rmrbpt said:
So I tried it with only 1 file and after that with the 4 files and still nothing.
To try the "repartition" option on ODIN I need a PIT file right?
Click to expand...
Click to collapse
Oh that's a bummer! 4-files usually fixes all types of bootloops.
I'm not familiar with that "adb reboot nvbackup" command and what it is supposed to do. Makes me wonder why it still bootloops.
Hers the pit-file in case you dont have it. Just unzip.
View attachment A5ULTE_EUR_OPEN.zip
From what I could read this is a specific command to SIII. In other phones it corrupts FSG and backup partitions.
"I started looking at "FSG" and "backup" partitions since "reboot nvbackup" writes partitions modemst1 and modemst2 to Backup and FSG. In other phones this makes a backup copy. "reboot nvrestore" would restore bad modemst's mounts. In Note 3's FSG partition is a system partition. Reboot nvbackup overwrote FSG. My blocks were obviously corrupted."
https://forum.xda-developers.com/showthread.php?t=2657519
I should leave
Auto Reboot, Repartition and F. Reset Time with the tick
and
Nand Erase All, Flash Lock and T Flash deselected right?
After I try this I'm gonna send to Samsung tomorrow.
Thanks for your help.
rmrbpt said:
From what I could read this is a specific command to SIII. In other phones it corrupts FSG and backup partitions.
"I started looking at "FSG" and "backup" partitions since "reboot nvbackup" writes partitions modemst1 and modemst2 to Backup and FSG. In other phones this makes a backup copy. "reboot nvrestore" would restore bad modemst's mounts. In Note 3's FSG partition is a system partition. Reboot nvbackup overwrote FSG. My blocks were obviously corrupted."
https://forum.xda-developers.com/showthread.php?t=2657519
I should leave
Auto Reboot, Repartition and F. Reset Time with the tick
and
Nand Erase All, Flash Lock and T Flash deselected right?
After I try this I'm gonna send to Samsung tomorrow.
Thanks for your help.
Click to expand...
Click to collapse
Yes, that's correct.
I just read that link and, yeah..probably same for you. You need backup of "FSG" & "BACKUP" partitions and copy to phone.
---------- Post added at 08:26 PM ---------- Previous post was at 08:18 PM ----------
Could someone make this command in Terminal emu or adb shell to get all partitions, then post it here?
.
ls -al /dev/block/platform/soc.0/7824900.sdhci/by-name
---------- Post added at 08:41 PM ---------- Previous post was at 08:26 PM ----------
tys0n said:
Yes, that's correct.
I just read that link and, yeah..probably same for you. You need backup of "FSG" & "BACKUP" partitions and copy to phone.
---------- Post added at 08:26 PM ---------- Previous post was at 08:18 PM ----------
Could someone make this command in Terminal emu or adb shell to get all partitions, then post it here?
.
ls -al /dev/block/platform/soc.0/7824900.sdhci/by-name
Click to expand...
Click to collapse
Nvm. I got it from the pit file.
FSG is mmcblk0p9 & BACKUP is mmcblk0p19
----------------------------------------------------------
PIT Magic v1.3.10 Copyright © Gaz 2012.
----------------------------------------------------------
Analysis for: A5ULTE_EUR_OPEN.pit
----------------------------------------------------------
----------------------------------------------------------
<<< Pit File Start >>>
----------------------------------------------------------
----------------------------------------------------------
<<< PIT File Header Information >>>
----------------------------------------------------------
Header Magic: 0x12349876 (4 Bytes)
Entry Count: 31 (4 Bytes)
----------------------------------------------------------
Dummy Data #1 (In String and Hexadecimal Format):
----------------------------------------------------------
String: COM_
Hexadecimal: 434F4D5F
----------------------------------------------------------
Dummy Data #2 (In String and Hexadecimal Format):
----------------------------------------------------------
String: TAR2
Hexadecimal: 54415232
----------------------------------------------------------
Dummy Data #3 (In String and Hexadecimal Format):
----------------------------------------------------------
String: MSM8
Hexadecimal: 4D534D38
----------------------------------------------------------
Dummy Data #4 (In String and Hexadecimal Format):
----------------------------------------------------------
String: 916
Hexadecimal: 39313600
----------------------------------------------------------
Dummy Data #5 (In String and Hexadecimal Format):
----------------------------------------------------------
String:
Hexadecimal: 00000000
----------------------------------------------------------
Dummy Data Length: (4 Bytes Per Block, 20 Bytes In Total.)
----------------------------------------------------------
Header Size: (28 Bytes)
----------------------------------------------------------
<<< PIT File Entries >>>
----------------------------------------------------------
----------------------------------------------------------
Entry Memory Address: 0x1C
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 1
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 8*192
Block Count: 30*720
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: APNHLOS
Flash FileName: NON-HLOS.bin
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xA0
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 2
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 38*912
Block Count: 117*632
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: MODEM
Flash FileName: modem.bin
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x124
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 3
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 156*544
Block Count: 1*024
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: SBL1
Flash FileName: sbl1.mbn
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x1A8
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 4
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 157*568
Block Count: 64
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: DDR
Flash FileName:
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x22C
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 5
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 157*632
Block Count: 4*096
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: ABOOT
Flash FileName: aboot.mbn
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x2B0
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 6
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 161*728
Block Count: 1*024
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: RPM
Flash FileName: rpm.mbn
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x334
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 7
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 162*752
Block Count: 1*024
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: QSEE
Flash FileName: tz.mbn
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x3B8
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 8
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 163*776
Block Count: 1*024
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: QHEE
Flash FileName: hyp.mbn
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x43C
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 9
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 164*800
Block Count: 6*144
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: FSG
Flash FileName:
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x4C0
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 10
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 170*944
Block Count: 32
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: sec
Flash FileName: sec.dat
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x544
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 11
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 170*976
Block Count: 21*536
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: PAD
Flash FileName:
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x5C8
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 12
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 192*512
Block Count: 20*480
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: PARAM
Flash FileName: param.bin
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x64C
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 13
Attribute: 5 (READ / WRITE)
Update Attribute: 5 (FOTA)
Block Size: 212*992
Block Count: 28*672
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: EFS
Flash FileName: efs.img.ext4
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x6D0
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 14
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 241*664
Block Count: 6*144
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: MODEMST1
Flash FileName: nvrebuild1.bin
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x754
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 15
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 247*808
Block Count: 6*144
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: MODEMST2
Flash FileName: nvrebuild2.bin
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x7D8
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 16
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 253*952
Block Count: 26*624
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: BOOT
Flash FileName: boot.img
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x85C
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 17
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 280*576
Block Count: 30*720
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: RECOVERY
Flash FileName: recovery.img
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x8E0
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 18
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 311*296
Block Count: 10*242
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: FOTA
Flash FileName:
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x964
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 19
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 321*538
Block Count: 14*318
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: BACKUP
Flash FileName:
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0x9E8
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 20
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 335*856
Block Count: 6*144
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: FSC
Flash FileName:
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xA6C
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 21
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 342*000
Block Count: 16
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: SSD
Flash FileName:
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xAF0
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 22
Attribute: 5 (READ / WRITE)
Update Attribute: 5 (FOTA)
Block Size: 342*016
Block Count: 16*384
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: PERSIST
Flash FileName: persist.img.ext4
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xB74
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 23
Attribute: 5 (READ / WRITE)
Update Attribute: 5 (FOTA)
Block Size: 358*400
Block Count: 18*432
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: PERSDATA
Flash FileName: persdata.img.ext4
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xBF8
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 24
Attribute: 5 (READ / WRITE)
Update Attribute: 5 (FOTA)
Block Size: 376*832
Block Count: 4*915*200
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: SYSTEM
Flash FileName: system.img.ext4
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xC7C
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 25
Attribute: 5 (READ / WRITE)
Update Attribute: 5 (FOTA)
Block Size: 5*292*032
Block Count: 409*600
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: CACHE
Flash FileName: cache.img.ext4
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xD00
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 26
Attribute: 5 (READ / WRITE)
Update Attribute: 5 (FOTA)
Block Size: 5*701*632
Block Count: 122*880
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: HIDDEN
Flash FileName: hidden.img.ext4
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xD84
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 27
Attribute: 5 (READ / WRITE)
Update Attribute: 5 (FOTA)
Block Size: 5*824*512
Block Count:
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: USERDATA
Flash FileName: userdata.img.ext4
FOTA FileName: remained
----------------------------------------------------------
Entry Memory Address: 0xE08
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 70
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size:
Block Count: 34
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: PGPT
Flash FileName: pgpt.img
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xE8C
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 71
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 34
Block Count: 16
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: PIT
Flash FileName: MSM8974.pit
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xF10
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 72
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 50
Block Count: 32
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: MD5
Flash FileName: md5.img
FOTA FileName:
----------------------------------------------------------
Entry Memory Address: 0xF94
----------------------------------------------------------
Binary Type: 0 (UNKNOWN)
Device Type: 2 (MMC)
Identifier: 73
Attribute: 5 (READ / WRITE)
Update Attribute: 1 (FOTA)
Block Size: 15*269*855
Block Count: 33
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: SGPT
Flash FileName: sgpt.img
FOTA FileName:
----------------------------------------------------------
<<< Pit File End >>>
----------------------------------------------------------
Tried it with the PIT file also.
Still nothing.
As I still have knox 0x0 I'm leaving it in Samsung tomorrow.
If they fix it fine. If they don't then I'm gonna really mess with it. Custom recovery, dump the partitions Hex edit them and try to reupload them to the phone.
Thanks for your help anyway.
Ok good Hope they fix it.
Otherwise you'll have to count on someone making backups of those partitions for you.
I'd do it for you if I had the device.
Good luck at samsung!
Skickat från min SM-A310F via Tapatalk
Samsung support fixed it
Thank you @tys0n
Thread can be closed.

Categories

Resources