Database Users

Need help.. Bootloader Err:A5,70,70,00,1F

I need help.. I failed trying to sbf my phone and now i see a black screen with this message every time i turn on my phone.
Bootloader
D2.35
Err:A5,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to program
Tranfer Mode: USB
What do i do??

anducly said:
I need help.. I failed trying to sbf my phone and now i see a black screen with this message every time i turn on my phone.
Bootloader
D2.35
Err:A5,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to program
Tranfer Mode: USB
What do i do??
Click to expand...
Click to collapse
What phone D2 or D2 G and which SBF did you use?
I assume you used the 2.2.00 sbf when you needed the 2.3.20 SBF once you have the 2.3.20 update the bootloader is changed and won't accept the 2.2.0 sbf.
IF that's the case you need to try flashing it with the 2.3.20 SBF found HERE
Read the bottom of THIS post if you get a bootloop or stuck at the M logo screen.

it works!! Thank you so much!!

anducly said:
it works!! Thank you so much!!
Click to expand...
Click to collapse
Glad it worked but what specifically worked? I gave a bunch of information, I just want to know which pieces helped in your case.

THANK YOU SOOOOOOOOO MUCH!!!!! I know that this post is a little old but I thought that my phone was finished. Again Thank You!

Thank you sooooooo much!!!! I thought all hope was lost.

Had this problem the other night but all is good now
Sent from my Motorola Droid 2 with Fission 2.3.1

This worked to fix my phone, thx so much
i used the 2.3.20 SBF

will this work on the droid x?

myrakle said:
will this work on the droid x?
Click to expand...
Click to collapse
You probably flashed the wrong SBF. You need to find the latest DX SBF they should be found in the DX section of XDA. Off the top of my head I can't think of the latest release.
Sent from my DROID2 using XDA App

anducly said:
I need help.. I failed trying to sbf my phone and now i see a black screen with this message every time i turn on my phone.
Bootloader
D2.35
Err:A5,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to program
Tranfer Mode: USB
What do i do??
Click to expand...
Click to collapse
I have a similar problem. I just got this phone and dont know the history other than the ESN is clear with vzw. It goes str8 to the BL screen and has this...
Bootloader
D2.35
Battery OK
OK to program
Tranfer Mode: USB
I Dloaded RSD lite 4.7 an the 2.35 BL sbf as well as the orig 2.2 and 2.3 FW sbf's. RSD will communicate with the phone. I can reload the BL sbf if I open the sbf file but none of the FW sbf will load in RSD, the start button command stays grayed out. Also in RSD on line 1 of the phone status it shows connected but above that in the device properties box info for the meid/esn etc show N/A.
I can access the recovery menu and at the bottom there is an error report for accessing recovery cache in a folder path.
Can I put an update.zip on an sd card and try to revive this thing that way or maybe I am doing something wrong? I am guessing this is the result of some botched flash job.
I have done some modding on my Droid X such as backing it up, deodexing and put the Liberty ROM on it as well and changing ROMS on my android tablet so I have some of the basics down but after much searching & reading I am seeking help with this one. Thanks in advance!
Edit: Now my battery is dead, I have found in other threads that a blank software device wont charge the battery if this helps

Ronbo85 said:
I have a similar problem. I just got this phone and dont know the history other than the ESN is clear with vzw.
I Dloaded RSD lite 4.7 an the 2.35 BL sbf as well as the orig 2.2 and 2.3 FW sbf's. RSD will communicate with the phone. I can reload the BL sbf if I open the sbf file but none of the FW sbf will load in RSD.
Click to expand...
Click to collapse
Maybe try flashing in linux and make sure you have read up about flashing SBF's on a DX. I don't know which one to flash as this is the D2 section and I have a D2.
I can access the recovery menu and at the bottom there is an error report for accessing recovery cache in a folder path.
Click to expand...
Click to collapse
This error is normal disregard it.
Can I put an update.zip on an sd card and try to revive this thing that way or maybe I am doing something wrong? I am guessing this is the result of some botched flash job.
Click to expand...
Click to collapse
That would work if you can find an update.zip made by moto that will go through the bootloader. And it doesn't really matter how it got here but probably it is a bad flash or a wrong ROM. (You might try connecting it via wall charger (not USB) while it's powered down then turn it on and see if you can get into clockwork recovery.)
Edit: Now my battery is dead, I have found in other threads that a blank software device wont charge the battery if this helps
Click to expand...
Click to collapse
You need to find someone with a DX to swap/charge your battery with so you can get in and flash it or you need an external battery charger (one that will charge the battery outside of the phone).
Sent from my DROID2 using XDA App

Hi, thank you for the reply. I know I made comments about my DX I have as well but to be clear this is a Droid 2 I am working on. I will get the battery charged somehow and let you know what I come up with, thanks again

Ronbo85 said:
Hi, thank you for the reply. I know I made comments about my DX I have as well but to be clear this is a Droid 2 I am working on.
Click to expand...
Click to collapse
Oh. In that case you need the 2.3.20 SBF found here http://droid2files.com/tools/VRZ_A955_2.3.20_1FF_01.sbf after you can get the phone charged. (If it helps the D2 has the same size battery as the D1 so you can swap/charge a D2 battery with a D2 or a D1.)
Also try finding RSDLite 4.8 or 4.9 as they might work better for you. I'd give you a link but I Haven't flashed an SBF with RSDlite I just use linux.
Sent from my DROID2 using XDA App

Cool thank you again. I got the battery charging via a rig I have done before with other devices from a camera charger. My linux(zorin) machine lost keyboard function out of the clear blue I havent had a chance to sort it yet(another project lol) but I do have a live usb thumb drive setup to use for linux. I'll try on this windows machine for now.
I'll keep you posted as to the results

well I got the battery charged up. I still have this problem when I select either the 2.2 or 2.3 sbf files the start button for applying the flash stays grayed out as if the files are invalid. If I select a bootloader sbf the start button is ok and I can load the BL sbf. I tried switching to rsd 4.8 too. I will keep playing around with it and maybe try to get my linux pc going.

Ok well even tho I had a few copies of the sbf files I went ahead and dloaded the one you linked. It would load in the rsd app but when I hit start to apply I get.... "Failed Flashing Process (0x7100) and this happens right away

Ronbo85 said:
Ok well even tho I had a few copies of the sbf files I went ahead and dloaded the one you linked. It would load in the rsd app but when I hit start to apply I get.... "Failed Flashing Process (0x7100) and this happens right away
Click to expand...
Click to collapse
Are you still using rsdlite 4.7? I had problems with it not too long ago. Downloaded 4.8 and worked like a charm. Hope you get it sorted out.
Sent from my ultra fast Liberated Droid 2

Ronbo85 said:
Ok well even tho I had a few copies of the sbf files I went ahead and dloaded the one you linked. It would load in the rsd app but when I hit start to apply I get.... "Failed Flashing Process (0x7100) and this happens right away
Click to expand...
Click to collapse
You might need to put the file in the C: drive of your windows box. At least that's what a another forum post found from a Google search suggested.
Or try linux Check here for more info: http://forum.xda-developers.com/showthread.php?t=804088. It's an old version of Ubuntu and there are somethings I want to add to it, I'll be updating it as soon as I have some free time to put it together using the 10.10 version.

I found this link... http://androidforums.com/droid-all-...-failed-flashing-process-0x7100-rsd-lite.html check out post #32
It does make a difference where the file is located yes and I got the sbf to perform the flash but after a lengthy process looks like about 3 steps and it takes 3-5 min I end up with a fail messege. There is more info I could provide but its been a long Monday I need to give it a break and now the batt is low again.
Thank you all again for your much appreciated help. I will regroup tomorrow. I will try to log in on my phone to see any ideas I mite need to think over.

[Defy] Stuck at Bootloader 09.10 - Err:A5,69,4E,00,41

I think the title kinda explains for itself!
From what I started and where I got?
Well, firstly, I tried to install 3.4.3-11 Motorola SBF with fixed Blur provided this link:
"Here you are, buddy
Fixed.SBF plus Nandroid of 3.4.3-11
http://www.multiupload.com/PB10JC9NQV"
(http://forum.xda-developers.com/showthread.php?t=966537&page=7)
I moved to the older PC still running Windows XP to manage RSD Lite 4.9 to work and recognize my Defy. (it apparently worked)
After wiping all data and cache, I started the phone in boot loader mode and tried to use RSD to load the SBF.
Everything seemed to be fine. But.....After RSD finished the update, it said for me to "turn on my Device". Well, it was already on and stuck at Motorola Logo.
I waited for quite some time, took a shower, smoke a cigar.... And, when I came back, nothing, phone was still on moto logo.
I force restarted the phone removing the battery. Still got stuck at moto logo for quite some time.
Sooooo, I decided to wipe everything again and try to install the SBF again, this time with the one provided by "Pays Rom" thread.
That was when stuff got bad.
After that, I got stuck at Bootloader with a "error code" indication.
Alright, it was time to read some more cause I realized I fked something up! Then, I find out I could load a Devtree SBF and that would unbrick the phone being able to install another SBF.
No succecs, eventhoug I tried to load those previous SBF, I still got problems either with RSD Lite or got stuck at bootloader with a that "error code" problem.
As I didnt know what else to do, I loadead back the devtree and got that different error code on the phone. (one mentioned on the thread title).
And, this is pretty much my whole problem! lol
Any Ideas what should I do?
My Defy is from Brazil - Claro and was running 2.1 android at the beggining!
Tyvm!

it seems like we get the similar Err,my defy also stuck at bootloader Err,my Err code is a5 69 35 00 27,if you have solved the problem,please tell me something about it.

oct307 said:
it seems like we get the similar Err,my defy also stuck at bootloader Err,my Err code is a5 69 35 00 27,if you have solved the problem,please tell me something about it.
Click to expand...
Click to collapse
Nothing yet.
Still trying to boot anything in it. If I ever find something, I'll let you know!
I'm getting this error now on RSD Lite when trying to load the SBF 3.4.3-11
Failed Flashing process. Phone[0000]: Error flashing subscriber unit. Device API Error: 0xE003003F Adress: 0xB2383000 Command: ADDR (0xE023203F), phone conected
New error code prompted on Bootloarder:
Err:A5,70,39,00,27
Now it shows Motorola logo for a few seccconds.
Stuck at code 39 or smthing while trying to install another SBF (the one with PAys Rom)
Ok, it unstucked, now RSD shows "restarting" and the motorola logo is on screen.
Finally, it loaded.
I used Pays Rom after a few tries with the first fixed SBF and jumping to the Pays Rom SBF.
After sometime, it installed!!!!!
The phone just started!!!!!
How about your problem mate, wich point are u at?

To solve both of your problems:
download and install the original 3.4.3-11 sbf, no nandroid or anything else.
You should allways be able to get into the original motorola boot loader and from there install any of their SBF, but some of the sbf versions with android do not allow downgrader, therefore you should be sure to use the same version and not a lower one.

pomah said:
To solve both of your problems:
download and install the original 3.4.3-11 sbf, no nandroid or anything else.
You should allways be able to get into the original motorola boot loader and from there install any of their SBF, but some of the sbf versions with android do not allow downgrader, therefore you should be sure to use the same version and not a lower one.
Click to expand...
Click to collapse
Thank you!
I managed to find that out by myself, but thanks for the help!!
I noticed it was a not downgradable version, but I don't really care as it fits what I was aiming and I don't have any intetions of going back to 2.1!

pomah said:
To solve both of your problems:
download and install the original 3.4.3-11 sbf, no nandroid or anything else.
You should allways be able to get into the original motorola boot loader and from there install any of their SBF, but some of the sbf versions with android do not allow downgrader, therefore you should be sure to use the same version and not a lower one.
Click to expand...
Click to collapse
thank you very much!
i have used 3.4.3_11-Stock._BLUR.sbf，but it doesn't work!it's still be stuck at bootloader 09.10 Err:a5,69,35,00,27.
i don't know what's the meaning of the errcode

hello,
I also have a similar problem, stuck on the bootloader but I have the "low battery cannot program" error. When I try to charge the battery, the battery appears with a "?" inside...
Does anyone already get this problem ? Battery out of order ? software problem ?

Use the macgyver method with usb cables. Search the forum and be brave. I had the same problem
Sent from my MB525 using Tapatalk

lanfearxt said:
Use the macgyver method with usb cables. Search the forum and be brave. I had the same problem
Sent from my MB525 using Tapatalk
Click to expand...
Click to collapse
this is the post: http://forum.xda-developers.com/showthread.php?t=892026&highlight=battery+charge

thanks for the link
it will help me saving my defy....

oct307 said:
thank you very much!
i have used 3.4.3_11-Stock._BLUR.sbf，but it doesn't work!it's still be stuck at bootloader 09.10 Err:a5,69,35,00,27.
i don't know what's the meaning of the errcode
Click to expand...
Click to collapse
I'm having this same problem.. anyone successfully fixed this?

try this
try apply this Full SBF 2.3 orange http://forum.xda-developers.com/showthread.php?t=1106375
or
2.1 SBF http://and-developers.com/sbf:defy
this is is a sign error in someone codegroup.

slayps said:
try apply this Full SBF 2.3 orange http://forum.xda-developers.com/showthread.php?t=1106375
or
2.1 SBF http://and-developers.com/sbf:defy
this is is a sign error in someone codegroup.
Click to expand...
Click to collapse
I tried a 2.1 SBF and it gave me a black screen.. the phone turns on, but keeps black.. so I re-flashed with a 2.2 sbf and got back to the same error..
Now I'm downloading the Orange 2.3 sbf file.. I dunno if it will work because I already tried 8 different sbf files

renatojf said:
I tried a 2.1 SBF and it gave me a black screen.. the phone turns on, but keeps black.. so I re-flashed with a 2.2 sbf and got back to the same error..
Now I'm downloading the Orange 2.3 sbf file.. I dunno if it will work because I already tried 8 different sbf files
Click to expand...
Click to collapse
I'm having this same problem.. anyone successfully fixed this?

neozhu said:
I'm having this same problem.. anyone successfully fixed this?
Click to expand...
Click to collapse
1) Try flashing on different PC to start fresh.
2) If you'd flashed so many sbf. You might not be able to remember them all. My guess is that you might be at froyo state(corrupted/failed system code), thus flashing another Eclair 2.1 sbf would not solve your issue. You must try on Froyo sbf only starting from bootloader mode and rsdlite 4.9 or 5.0.
3) Take note of your battery level as it might draining down while you attempting to put some resuraction on the device.
4) Try relax and take a bath and smoke a bigger cigar just like the OP of this thread did...

i too have this same problem, exept i dont know what ver i had and i flashed so many sbf. ive found some sbf that work but i get no signal.

JDM-Bb said:
i too have this same problem, exept i dont know what ver i had and i flashed so many sbf. ive found some sbf that work but i get no signal.
Click to expand...
Click to collapse
no signal..? have you try baseband switcher application..?

yes ive try that with no luck.

hELLO
Please, tell me how to solve that problem with bootloader error A5, 70, 39,00 27 in my defy?? You have said you solved it. please help

you need to be calm and cool with lot of patience. It takes upto 10 - 15 Minutes...
the flashing happens at the speed of your computer.
try to use original cables and use USB ports of your desktop motherboard or laptop without any extension cables.
keep your pc in NO SLEEP mode. Batter should be almost full before flashing ...these are some tips...

[Need help]

guys i flashed to gb2.3.4. It went smooth. But due to the bugs i wanted to go back to 1.8.3. so i tried to flash back using 1.5.7(because i have this built full) but while flashing it failed. now if i want to go back to 2.3.4 again it wont start and writes modem start failed on startup red moto screen.please guys guide me.

amrutpritam said:
guys i flashed to gb2.3.4. It went smooth. But due to the bugs i wanted to go back to 1.8.3. so i tried to flash back using 1.5.7(because i have this built full) but while flashing it failed. now if i want to go back to 2.3.4 again it wont start and writes modem start failed on startup red moto screen.please guys guide me.
Click to expand...
Click to collapse
Did you unlock the bootloader again? Afaik, it relocks the bootloader once you do sbf flash.
Sent from rooted Atrix on 2.3.4 with unlocked bootloader using xda premium app.

I'm pretty sure the bootloader can't relock. Unlocking physically blows a fuse.
Sent from my MAtrix

amrutpritam said:
guys i flashed to gb2.3.4. It went smooth. But due to the bugs i wanted to go back to 1.8.3. so i tried to flash back using 1.5.7(because i have this built full) but while flashing it failed. now if i want to go back to 2.3.4 again it wont start and writes modem start failed on startup red moto screen.please guys guide me.
Click to expand...
Click to collapse
Download 1.87 and try to flash that.

JayRolla said:
Download 1.87 and try to flash that.
Click to expand...
Click to collapse
is there a new version 1.87?

is there any other link to download the full version of 1.8.3?The m3 superthread gives mega upload links and i am unable to download it from that site
thanks in advance

ceo.mtcl said:
Did you unlock the bootloader again? Afaik, it relocks the bootloader once you do sbf flash.
Click to expand...
Click to collapse
At this time you CANT RELOCK the bootloader. Flashing another SBF only removes the "Unlocked" at the top left. But the phone is still unlocked.

amrutpritam said:
is there any other link to download the full version of 1.8.3?The m3 superthread gives mega upload links and i am unable to download it from that site
thanks in advance
Click to expand...
Click to collapse
They have both megaupload and filesonic.
http://forum.xda-developers.com/showthread.php?t=1125944

oops i missed the filesonic link.recently i noticed my phone always fails to flash at the point where STARTING BP INTERFACE is written in rsd lite progress coloumn.after that if i try to start the phone it says modem failed to start(0) starting rsd lite protocol. Is it a hard brick? I had read in this forum somewhere that hard brick is possible after boot loader unlock. i like this phone very much. so worrying so much.

amrutpritam said:
oops i missed the filesonic link.recently i noticed my phone always fails to flash at the point where STARTING BP INTERFACE is written in rsd lite progress coloumn.after that if i try to start the phone it says modem failed to start(0) starting rsd lite protocol. Is it a hard brick? I had read in this forum somewhere that hard brick is possible after boot loader unlock. i like this phone very much. so worrying so much.
Click to expand...
Click to collapse
I would redownload the SBF. And try again. Try a new USB Cable. Try a diffirent USB Port. And leave the computer alone while it running.

donniesd said:
I would redownload the SBF. And try again. Try a new USB Cable. Try a diffirent USB Port. And leave the computer alone while it running.
Click to expand...
Click to collapse
Thanks i will definitely do that

Gitbrew has all the files you need.
Sent from my MB860 using XDA Premium App

no success
i redownloaded the firmware
used another usb cable
another usb port(this time the back of pc)
but it again failed in switching device to BP pass through mode.Pc actually searches for a driver for QHSUSB_DLOAD and doesnot find it. then fails to switch the device
i tried by formatting my computer and doing it again but without success.
please guys help me

[Q] Proplem With Motorola Flipside (Froyo)

I recently got a Flipside abroad from ebay and its an AT&T One, I don't have warranty
It was Working nice with some proplems like the touch freezes and apps stop working frequently but it was OK
my cell don't read arabic so i searched how to add the arabic reading and found one, i had to input framework.jar and another root file, run an cmd, and then copy the produced .zip to sd to flash it after renaming it update.zip
The Flash failed and then i had to use the manual way they mentioned about copying outputed files into framework and lib folders
My Device is rooted and I used adbd insecure to give Android Commander permission to access root from PC
i exchanged files and rebooted as mentioned, and That's The Proplem, The Phone Skips At The MOTO LOGO and that is always followed by an AT&T animation then it starts, but the phone is freezed at the Moto Logo, and i tried removing/placing battery, let it to empty charge then charge it
And to restore factory settings through the Recovery mode but the same problem occurs
PLEASE HELP QUICKLY! as i Cannot Use my phone, Its Android 2.2.2 Froyo

yosry93 said:
I recently got a Flipside abroad from ebay and its an AT&T One, I don't have warranty
It was Working nice with some proplems like the touch freezes and apps stop working frequently but it was OK
my cell don't read arabic so i searched how to add the arabic reading and found one, i had to input framework.jar and another root file, run an cmd, and then copy the produced .zip to sd to flash it after renaming it update.zip
The Flash failed and then i had to use the manual way they mentioned about copying outputed files into framework and lib folders
My Device is rooted and I used adbd insecure to give Android Commander permission to access root from PC
i exchanged files and rebooted as mentioned, and That's The Proplem, The Phone Skips At The MOTO LOGO and that is always followed by an AT&T animation then it starts, but the phone is freezed at the Moto Logo, and i tried removing/placing battery, let it to empty charge then charge it
And to restore factory settings through the Recovery mode but the same problem occurs
PLEASE HELP QUICKLY! as i Cannot Use my phone, Its Android 2.2.2 Froyo
Click to expand...
Click to collapse
Reflash stock sbf with rsd is my only suggestion. Here's the stock sbf
http://db.tt/H2RuCD8h

What?
pre4speed said:
Reflash stock sbf with rsd is my only suggestion. Here's the stock sbf
Click to expand...
Click to collapse
Sorry it may look like i'm a noob, but what is "Stock Sbf with rsd" ??

I done it with another sbf and success but now i'm stuch in that stupid bootloader , can you tell me how to get into the stock recovery from my flipside to wipe/data? as i cannot get of that bootloader

yosry93 said:
I done it with another sbf and success but now i'm stuch in that stupid bootloader , can you tell me how to get into the stock recovery from my flipside to wipe/data? as i cannot get of that bootloader
Click to expand...
Click to collapse
after flashing sbf file, no need to wipe data, if you stuck at some where, reflash the sbf file.

phapsubongtoi said:
after flashing sbf file, no need to wipe data, if you stuck at some where, reflash the sbf file.
Click to expand...
Click to collapse
I reflashed it 3 times , Still stucked on that Bootloader !!

yosry93 said:
I reflashed it 3 times , Still stucked on that Bootloader !!
Click to expand...
Click to collapse
Prolly need the bootloader for froyo as well. Sorry shoulda gave you that too.
Flash bootloader first then the sbf. All done via rsd
Froyo bootloader http://db.tt/FuXac7kG

Seems to be my falt
pre4speed said:
Prolly need the bootloader for froyo as well. Sorry shoulda gave you that too.
Flash bootloader first then the sbf. All done via rsd
Froyo bootloader
Click to expand...
Click to collapse
Ok i flashed it . and flashed the sbf i'm using agian
SAGE_U3_10.23.20_SIGNATT_USASAGE02B25ND0ATTNA02E.0R_PDS001_SAGEATT_P033_HWp4_1FF.sbf
but the same problem, should i use the SBF u told me about or any other??
The SBF i used is also for Flipside, the rsd says successful, and PASS is the result but still stacked in that Bootloader whatever i rebooted using power button or replaced the battery, known that i cannot open Recovery (X+Power Button) to wipe data

Thank You
Thank You very much body, i used the SBF you gave me and it worked well, my phine is now working again
Thank Youuu

yosry93 said:
Thank You very much body, i used the SBF you gave me and it worked well, my phine is now working again
Thank Youuu
Click to expand...
Click to collapse
You are quite welcome. Been so long since I've used or looked at my flopside (no typo lol) that I had forgotten froyo needed the updated bootloader first. Glad its working again.

[Q] Fastboot Reason: Flash Failure

I'm in over my head and hoping the kindness of a stranger can bail me out! It all started when I attempted to root my wife's Razr M from Verizon. I used a utility (the DROID_RAZR_Utility_Jellybean_XT912_WinMacLin.zip) to attempt an update and then a root. Well the update failed and now I see this when the phone starts up.
AP Fastboot Flash Mode (S)
Device is LOCKED. Status Code: 0
Battery OK
Transfer Mode:
USB Connected
Fastboot Reason: Flash Failure
usb connected
So I figured out that I can get to BP Tools and this somehow bypasses the problem and boots the phone normally. So as long as my wife doesn't turn the phone off, she'll be fine but I cannot leave it this way. I am open to suggestions and at your mercy. Thanks in advance!
-Chad

So did you ever root?
Sent from my Galaxy Nexus using xda premium

skippid said:
So did you ever root?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
No. I'd like to eventually but right now, I need to make that fastboot lock screen go away. Please treat me like a noob if it's not already apparent.
Thanks

What caused the update to fail? Also, you're lucky btw - Normally a failed update == a brick.
If you didn't root, you can probably take it to Verizon. If you were flashing the OTA and it went bad, that shouldn't be a problem at all...

sloosecannon said:
What caused the update to fail? Also, you're lucky btw - Normally a failed update == a brick.
If you didn't root, you can probably take it to Verizon. If you were flashing the OTA and it went bad, that shouldn't be a problem at all...
Click to expand...
Click to collapse
I followed this video on youtube: youtube.com/watch?v=oDzMQykQ2fA How to Upgrade To And Root Jelly Bean on Droid Razr!
I watched the script run and it kept saying "fail" on several line items and I knew I was in trouble. Unfortunately this was self-induced and I have no desire to go to Verizon for help. I'm not that much of a noob. Anyhow, I'd just like to get back to square one and start over. What I did to get to BP Tools is to hold down volume up, volume down, and power button. Screen shuts off..let those buttons up and press them again which brings me to a second menu. From there I can choose recovery, fastboot, BP Tools, factory reset. The only one that helped was BP Tools which basically sent the phone to a regular boot and it acts normal. If I choose recovery, I get the android dude on his back with a explanantion or question mark, don't recall. If I press volume down, volume up and then release volume up, I can get to the menus where it allows you to run install from disk or something like that. I can't get to the point where I can see my phone on the computer so that I could place a flash file on the phone and re-flash it or something. If any of this sounds remotely familiar to anyone out there, please feel free to add your 2 cents. Thanks!

Try to wipe all user data after you get to the screen where you can install zips in recovery. See if that works. Pm me if you get stuck and we can possibly fix it through adb
Sent from my Galaxy Nexus using xda premium

skippid said:
Try to wipe all user data after you get to the screen where you can install zips in recovery. See if that works. Pm me if you get stuck and we can possibly fix it through adb
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I did try that..sorry should have mentioned it. No dice. Same screen and I got the pleasure of setting the wife's phone up again.
I'm open to suggestions. adb?

ce_lloyd said:
I'm in over my head and hoping the kindness of a stranger can bail me out! It all started when I attempted to root my wife's Razr M from Verizon. I used a utility (the DROID_RAZR_Utility_Jellybean_XT912_WinMacLin.zip) to attempt an update and then a root. Well the update failed and now I see this when the phone starts up.
Click to expand...
Click to collapse
I see your problem...
DROID_RAZR_Utility_Jellybean_XT912_WinMacLin.zip
The M is an XT907...
Use this one: http://forum.xda-developers.com/showthread.php?t=2207419 and do a fastboot restore...

Thank you sloosecannon. Had some logging in troubles so I appreciate it!

TMYINC said:
Thank you sloosecannon. Had some logging in troubles so I appreciate it!
Click to expand...
Click to collapse
No problem

sloosecannon said:
I see your problem...
DROID_RAZR_Utility_Jellybean_XT912_WinMacLin.zip
The M is an XT907...
Use this one: http://forum.xda-developers.com/showthread.php?t=2207419 and do a fastboot restore...
Click to expand...
Click to collapse
This looks really straightforward. I think I can handle it. Are you certain it will work? Just plug in the phone and run the bat file? Right now the phone works so I guess will give it a shot and hopefully I'm on my way. Thanks everyone for the assist.

ce_lloyd said:
This looks really straightforward. I think I can handle it. Are you certain it will work? Just plug in the phone and run the bat file? Right now the phone works so I guess will give it a shot and hopefully I'm on my way. Thanks everyone for the assist.
Click to expand...
Click to collapse
Okay, this worked flawlessly. Thanks so much for the help. Truly amazing pointing this dunce in the right direction! Gnite.

Hi all!
I've XT926/Razr HD (Which I've rooted with towelroot)
First I tried to root it with the help of geohot (for razr M), but my phone stuck on the reboot, what I saw on the screen was:
AP Fasboot Flash Mode (S)
10.9B(*) (sha-61146a2, 2014-05-02 03:15:48)
eMC Info: Size 16GB
Device is LOCKED. Status Code: 0
Battery OK
Connect USB
Data Cable
Fasboot reason: Flash Falure
Whenever I reboot my phone I see this screen, what I want is just to get rid of this issue.
My system version is 183
If anyone can help me to fix this issue I will be very thankfull.
Thanks in advance!
---------- Post added at 01:11 AM ---------- Previous post was at 01:04 AM ----------
One thing more which I forgot to mention that my phone is running on KitKat 4.4.2

aichauhan said:
Hi all!
I've XT926/Razr HD (Which I've rooted with towelroot)
First I tried to root it with the help of geohot (for razr M), but my phone stuck on the reboot, what I saw on the screen was:
AP Fasboot Flash Mode (S)
10.9B(*) (sha-61146a2, 2014-05-02 03:15:48)
eMC Info: Size 16GB
Device is LOCKED. Status Code: 0
Battery OK
Connect USB
Data Cable
Fasboot reason: Flash Falure
Whenever I reboot my phone I see this screen, what I want is just to get rid of this issue.
My system version is 183
If anyone can help me to fix this issue I will be very thankfull.
Thanks in advance!
---------- Post added at 01:11 AM ---------- Previous post was at 01:04 AM ----------
One thing more which I forgot to mention that my phone is running on KitKat 4.4.2
Click to expand...
Click to collapse
You need to flash the stock firmware using RSD or House of Moto. This should be posted over at the HD forums, but the process is essentially the same for any Moto device. There's tons of threads about it. Download the software, download the firmware, connect the phone and flash.
Sent from my Blissful RAZR M 5.0.2 from Tapatalk

Flash Failure xt907 droid razr m verizon 4.4.2
Hello there!
i have the same proble with my xt907 droid razr m verizon 4.4.2.
Did you fix this problem?
can you help mw to fix it,i dont know how
thank you so much!!
ce_lloyd said:
I'm in over my head and hoping the kindness of a stranger can bail me out! It all started when I attempted to root my wife's Razr M from Verizon. I used a utility (the DROID_RAZR_Utility_Jellybean_XT912_WinMacLin.zip) to attempt an update and then a root. Well the update failed and now I see this when the phone starts up.
AP Fastboot Flash Mode (S)
Device is LOCKED. Status Code: 0
Battery OK
Transfer Mode:
USB Connected
Fastboot Reason: Flash Failure
usb connected
So I figured out that I can get to BP Tools and this somehow bypasses the problem and boots the phone normally. So as long as my wife doesn't turn the phone off, she'll be fine but I cannot leave it this way. I am open to suggestions and at your mercy. Thanks in advance!
-Chad
Click to expand...
Click to collapse

http://forum.xda-developers.com/showthread.php?t=2207419
osk4rin said:
Hello there!
i have the same proble with my xt907 droid razr m verizon 4.4.2.
Did you fix this problem?
can you help mw to fix it,i dont know how
thank you so much!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2207419

zip folder link is not available anymore
zip folder link is not available anymore
do you have the zip available?
many thanks!
ce_lloyd said:
http://forum.xda-developers.com/showthread.php?t=2207419
Click to expand...
Click to collapse

osk4rin said:
zip folder link is not available anymore
do you have the zip available?
many thanks!
Click to expand...
Click to collapse
that hasn't been updated in a long time, likely wouldn't work with the bootloader on your device
what bootloader version is on the device (A P Fastboot version)?
Sent from my KFFOWI using XDA Labs

Flash Failure xt907 droid razr m verizon 4.4.2
I got this flash failure.
sd_shadow said:
that hasn't been updated in a long time, likely wouldn't work with the bootloader on your device
what bootloader version is on the device (A P Fastboot version)?
Sent from my KFFOWI using XDA Labs
Click to expand...
Click to collapse

osk4rin said:
I got this flash failure.
Click to expand...
Click to collapse
there is no error on the screen
that is normal fastboot screen for the xt907
device has the latest bootloader only 183.46.15 firmware will work
use the firmware in my RSD lite thread
http://forum.xda-developers.com/showthread.php?t=3184005
[How To][XT907] Flash Firmware with RSD Lite to restore stock firmware/Unbrick (2015)
Sent from my KFFOWI using XDA Labs
---------- Post added at 04:20 AM ---------- Previous post was at 04:17 AM ----------
if there was an error, it would be lower on the part of screen, that's not showing
Sent from my KFFOWI using XDA Labs