This is an UNOFFICIAL port of PhilZ-Touch recovery for SM-T800 chagallwifi and SM-T805 chagalllte (Exynos version only)
NOTE: flashing this recovery will trigger the knox flag and thus likely void your warranty
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WHAT TO EXPECT:
fully functional PhilZ Touch CWM
WHAT NOT TO EXPECT:
frequent updates
individual requests, but i will listen
FEATURES:
F2FS support (NOTE: as to use F2FS, you will need a kernel that support F2FS or otherwise boot loops may occur)
native EXT2 kernel support (not treated as EXT4)
exFAT and NTFS support
CHANGELOG:
20150419 build07b SM-T800 and SM-T805
- new unified version for SM-T800 and SM-T805 philz version 6.58.7 build07a
- now detects and reports correct device model (T800/T805) for device checkings in recoveries
- no other changes made
20141222 build07a SM-T800 and SM-T805
- corrected philz version in file name
- unified version for SM-T800 and SM-T805 philz version 6.58.7 build07
- no other changes made (no need to update if you have build07 already)
20141214 build07 SM-T800 and SM-T805
- updated to philz version 6.58.7
- should fixed sudden freezes in recovery mode
20140930 build05 SM-T800
- fixed selinux contents not properly shown in shell
- fixed backup problem with exFAT fotmatted external sdcard
20140916 build04 SM-T800
- updated to philz version 6.57.8
20140826 build03a SM-T705 EARLY BETA1 (failed to boot so removed. if u wanna help to debug it, send me a pm)
- WARNING: I have NOT tested this since i do not own one, and i even dont know if it is BOOTABLE OR NOT
- make sure you are able to cope with any difficulties after flashing this beta
- by default it should be in landscape mode
- please test and pay attention to the items below:
x and y axis are correct shown and detected by touching and tapping on the screen but not flipped/swapped incorrectly
adb is accessibile under recovery
- it is suggested to look for any feedback from users before installing
- please kindly post a reply if it doesnt boot or produces serious problems so that i can removed the link asap, thank you
20140823 build03a SM-T805
- revised version for SM-T805 build03
20140821 build03 SM-T800
- fixed /internal_sd and /external_sd mount point in aroma manager (they are only mounted in /sdcard and /storage/sdcard1 respectively)
20140819 build02 SM-T800
- initial release
- philz version 6.56.2
- base on stock kenel XXU1ANF8 with minimal changes but unneeded features removed
INSTALLATION:
cwm zip version (PS if your device is with stock recovery, get the tar.md5 version and flash it via Odin)
- put the zip file in your internal sdcard or external sd
- choose install zip in the recovery (cwm recommended, not tested with others)
tar.md5 version
- flash the tar.md5 file via Odin on your pc
- in case for zipped tar.md5 file (xxx.tar.md5.zip), make sure the file name ends with .tar.md5 before flash by unzipping it once
FAQ
please refer to the official FAQ section from PhilZ Touch CWM thread
DOWNLOADS: (NO mirror please)
By downloading or using any file here you agree that I am not responsible for any loss or damage whatsoever caused to your devices. So download or use at your own risk
Latest Versions ** 20190107 links updated due to changes in pcloud
20150419 - philz version 6.58.7 (build07b) SM-T800/SM-T805
philz_touch-6.58.7-T800-T805-build07b.zip
size: 6.40MB
md5: B7BEB0E1ECA90B046AA37E4715BD4950
philz_touch-6.58.7-T800-T805-build07b.tar.md5
size: 6.25MB
md5: F63A5DFCE240020A317DE37E5ED60BC1
Archived Versions
20141222 - philz version 6.58.7 (build07a) SM-T800/SM-T805
philz_touch-6.58.7-T800-T805-build07a.zip
size: 7.44MB
md5: F1A244DD2F1D37CA95D37B035BF3B51B
philz_touch-6.58.7-T800-T805-build07a.tar.md5
size: 7.28MB
md5: FE28975C66C6F20E91205E16FBA888E1
[*] 20141214 - philz version 6.58.7 (build07) SM-T800/SM-T805
[URL="http://bit.ly/1smJADy"]philz_touch6.57.8-T800-build07.zip (wrong file name, 6.58.7 inside, for T800 only at the moment, will update to include T805 soon)
importance: high
size: 7.44MB
md5: 4E3A4B5C958A01EB84F0A28C3EC21B25
philz_touch6.57.8-T800-build07.tar.md5 (wrong file name, 6.58.7 inside, for both T800 and T805)
importance: high
size: 7.28MB
md5: 2DA7BA6F19E8D867C037F11E69AAD7BA
20140930 - philz version 6.57.8 (build05) SM-T800
philz_touch6.57.8-T800-build05.zip
size: 7.53MB
md5: 11A92347715ADCC76E8D18836D5BA3B7
philz_touch6.57.8-T800-build05.tar.md5
size: 7.38MB
md5: 7976A329957B477EE67E580F3EE54755
20140916 - philz version 6.57.8 (build04) SM-T800
philz_touch6.57.8-T800-build04.zip
size: 6.84MB
md5: B1D90FA0F6BD98902F97F37AD61F3B3D
philz_touch6.57.8-T800-build04.tar.md5
size: 6.67MB
md5: DD701F753C7478BE38879F74C32E3EA5
20140826 - philz version 6.56.2 (build03a) SM-T705 EARLY BETA1 (failed to boot, removed)
20140823 - philz version 6.56.2 (build03a) SM-T805
philz_touch6.56.2-T805-build03a.zip
size: 6.65MB
md5: 48FAF447E278B9E9E00DB8FF4A80F246
philz_touch6.56.2-T805-build03a.tar.md5
size: 6.49MB
md5: ADC077CD942C11B0E03C79D57AC16BAB
20140821 - philz version 6.56.2 (build03) SM-T800
philz_touch6.56.2-T800-build03.zip
size: 6.65MB
md5: 04AC9309A575E40D5776AACBAF4E3587
philz_touch6.56.2-T800-build03.tar.md5
size: 6.49MB
md5: 4C8EF827CAAD3A914133D123A6E4231E
20140819 - philz version 6.56.2 (build02) SM-T800
philz_touch6.56.2-T800-build02.zip
size: 6.65MB
md5: 613112B6BFF758D8C730FE8A5CF228B4
philz_touch6.56.2-T800-build02.tar.md5
size: 6.49MB
md5: FDEE33CF1BC9EC83915EB22307E46C85
If you like it please consider to make a donation to buy me a beer or coffee by clicking here. Thank you!
CREDITS:
Phil3759 (thanks for allowing me to port his works)
rootSU
Samsung (special thanks for this beautiful amoled Tab S)
CyanogenMod
SOURCES:
PhilZ-cwm6
.
reserved #1
reserved #2
reserved #3
hi ykkfive glad to see you here as well.
can you help port it for t705 and variance as well?
edan1979 said:
hi ykkfive glad to see you here as well.
can you help port it for t705 and variance as well?
Click to expand...
Click to collapse
hey, hello
exynos or snapdragon?
sadly... mostly exynos... havent see anyone with snapdragon version yet.
ykkfive said:
hey, hello
exynos or snapdragon?
Click to expand...
Click to collapse
I think T800 and another variants T805 T700 T705 are running on the same Exynos chipset.
Good stuff mate Am a TWRP fan, but will give this a go when (if) you have it working for T705 and feedback when able. Just a bit busy with current projects right now.
Cheers,
UITA
edan1979 said:
sadly... mostly exynos... havent see anyone with snapdragon version yet.
Click to expand...
Click to collapse
GOF007 said:
I think T800 and another variants T805 T700 T705 are running on the same Exynos chipset.
Click to expand...
Click to collapse
just in case he owns one with snapdragon, since some markets are selling the snapdragon variant
and, I may give it a try. but I will quit very soon this time if it fails since I don own one. as you know, it wasn't a good experience before
anyone mind to send me the stock t705 recovery image?
UpInTheAir said:
Good stuff mate Am a TWRP fan, but will give this a go when (if) you have it working for T705 and feedback when able. Just a bit busy with current projects right now.
Cheers,
UITA
Click to expand...
Click to collapse
ok, cool
thanks
Works on my t805 also!
boeser said:
Works on my t805 also!
Click to expand...
Click to collapse
thanks for reporting, mate
I wanted someone to test it since it has been trimmed and I believe it should work with t805 also, but I have not examimed the partition table yet
anyway, thank you. and pls report if you have found any bugs
btw, you must be using the Odin, right? since the zip version will check for the device model
edit oh yes, forgot to mention. since i have not check with the partition layouts on the t805 yet, backup for efs/modem, etc may NOT work
ykkfive said:
thanks for reporting, mate
I wanted someone to test it since it has been trimmed and I believe it should work with t805 also, but I have not examimed the partition table yet
anyway, thank you. and pls report if you have found any bugs
btw, you must be using the Odin, right? since the zip version will check for the device model
Click to expand...
Click to collapse
No bugs so far. Just restored a nandroid backup I made with CWM. All went well, so I think the partitions are right.
I flashed the zip with CWM recovery. It flashed, so no check for the model
boeser said:
No bugs so far. Just restored a nandroid backup I made with CWM. All went well, so I think the partitions are right.
I flashed the zip with CWM recovery. It flashed, so no check for the model
Click to expand...
Click to collapse
how come it let u passed the model checking????
which recovery u were using before? stock one?
ykkfive said:
how come it let u passed the model checking????
which recovery u were using before? stock one?
Click to expand...
Click to collapse
I used the recovery image from the cyanogen post: http://forum.xda-developers.com/gal...fficial-cyanogenmod-11-android-4-4-4-t2835170
boeser said:
I used the recovery image from the cyanogen post: http://forum.xda-developers.com/gal...fficial-cyanogenmod-11-android-4-4-4-t2835170
Click to expand...
Click to collapse
it could be, since the one for cm11 is targeted for t800, so inside the build.prop in the recovery, it declares itself as t800 instead of t805. and that's why u were allowed to continue
just my wild guess
Think so too. Well it worked for me.
the stock recovery for T705 as being requested.
EFS mmcblk0p3
recovery mmcblk0p10
system mmcblk0p18
cache mmcblk0p19
data mmcblk0p21
Tried this last night on my T800 16gb UK model and worked fine installing the blckasop_r5 release. thank you for porting it
Related
Introducing my new tool called PRFCreator. With this tool, anyone can easily create a pre-rooted firmware.
What is a pre-rooted firmware
A pre-rooted firmware is a firmware, which already includes root. This is for example important if you want to update the firmware to a version, where there is no public root exploit. To flash a pre-rooted firmware, you need a recovery menu. An unlocked bootloader is not required.
How does the tool work
The tool should be self-explanatory. SuperSU zip can be downloaded from here. [NUT]'s dualrecovery (*.flashable.zip) can be downloaded from here. Recovery is optional and if your device is not supported by dualrecovery, you can use any recovery (just has to be a flashable zip).
Depending on the firmware size and your computer speed, generating a pre-rooted firmware can take up to 7 minutes. The pre-rooted firmware will be created in the directory of the executable and called flashable-prerooted.zip.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The order for the extra files is
Extra flashable
In the order you added it initially in the GUI
APKs
TWRP is recommended for flashing!
Note: If you do not include the kernel in the pre-rooted firmware, it's recommended to flash it afterwards with flashtool (check "system" under Exclude).
Note2: I am not responsible for any damage done to your device or if you end in a bootloop.
Credits
Androxyde - some helpful information about sin files from his flashtool
[NUT] - used his flashable scripts as base
E:V:A - sgdisk utility compiled for arm
dotnetzip developers (note I'm using a slightly modifed version with a bugfix)
Requirements
Microsoft .NET 4.0
Source code
https://github.com/dosomder/PRFCreator
Changelog
v1.3
Fix a signing bug when PRFCreator was in a folder which included a space (thanks Calystos)
Allow multi select for Extra Zip / APK
Update sinflash to v0.42 (fix sha256 bug (thanks RoberM) and large zip file handling (thanks Fragmentation))
v1.2
Fix a signing bug (thanks RyTekk)
Fix bug when flashing multiple apps
Update lz4 lib and 7zip binaries (thanks tetsuo55) and dotnetzip library
Update sinflash binary to v0.4 (supports now also non-msm devices, thanks eoinkennedy for report)
.
v1.1
Allow users to add APKs
Improved sinflash to allow compression
Fix smaller bugs and improve speed
.
v1.0
New method using sinflash (sin files are flashed on the phone directly instead of extracting on the computer)
New busybox
.
v0.9
Compatible with mono
New settings file to change temp folder and choose another destination for the pre rooted firmware
Work towards new sin format introduced with Z3+
.
v0.8
Add the ability to include additional flashable zip files
Display information when clicking on version number
.
v0.7
Add zip signing option
Small fixes in code
.
v0.6 - Nuked (wrong binary uploaded)
Prefer to use gpt uuid instead of partition names
Add different modem sin names
Clean code
.
v0.5
Fixed bug with missing dualrecovery
Added check if SuperSU and recovery are flashable
Added ability to flash modem
Support for sin v2
.
v0.4
Make dualrecovery zip optional
Fix exception if file does not exist in sin
.
v0.3
Initial release
I have a question!
What should I check under 'Include' ?
Kernel: Personally I recommend to check kernel. For some firmwares it's important otherwise the phone won't boot.
FOTAKernel: This kernel is used for OTA Updates. I recommend to include it.
Modem: This is the baseband / modem. Some updates can give you slightly better battery life and signal.
LTALabel: This is a partition with regulatory informations. It should not really change the performance of your device. I recommend to include it.
Click to expand...
Click to collapse
.
Do I need to include a recovery?
No, recovery is optional. If you do not wish to include recovery you should add this flashable zip under Extra Files to be able to mount system as rw: https://github.com/dosomder/SonyRICDefeat/blob/master/RICDefeat.zip
Note: If your bootloader is unlocked, this is not needed as RIC will be disabled anyway.
Click to expand...
Click to collapse
.
Can I edit system.ext4 inside flashable zip?
Yes, you can edit it on a linux machine. You don't have to change anything else in the flashable zip. See here for more info: http://forum.xda-developers.com/showpost.php?p=55547862&postcount=246
Click to expand...
Click to collapse
.
What is zip signing?
For a proper flashable zip, zip signing is used. It generates a hashtable of all the files in the flashable zip to verify its integrity. Note that zip signing might double the process time of generating a flashable zip.
Click to expand...
Click to collapse
.
Does it wipe my user data?
No.
Click to expand...
Click to collapse
.
What is extra zip?
With this feature, you can include additional flashable zip files. An example is to include Xposed directly (you can find the flashable zip in the Xposed apk).
Click to expand...
Click to collapse
Good news... Will try later...
This is awesome tool...
Still couldn't find free time to test it but if it's working and I'm sure it is...
This is more then welcome...
Tnx mate...
Sent from my D6503 using Tapatalk
Will try this on the next FW release, thanks! :good:
Thanks for the tool. Looks great. I'll try it.
Hi,
Thank you.. Looks really good! What do the Kernel, FOTAKernel and LTALabel checkboxes do? Also, will this work with the latest .133 ftf?
Regards,
Alan
nalab1 said:
Hi,
Thank you.. Looks really good! What do the Kernel, FOTAKernel and LTALabel checkboxes do? Also, will this work with the latest .133 ftf?
Regards,
Alan
Click to expand...
Click to collapse
It will include those in the flashable zip. FOTAKernel and LTALabel are not really important but I thought why not include this feature. Kernel is more important and I recommend to always use the kernel from the firmware you're using.
It should work with all the current ftfs (the tool is built for sin version 3).
zxz0O0 said:
It will include those in the flashable zip. FOTAKernel and LTALabel are not really important but I thought why not include this feature. Kernel is more important and I recommend to always use the kernel from the firmware you're using.
It should work with all the current ftfs (the tool is built for sin version 3).
Click to expand...
Click to collapse
Thanks for the reply... What is sin version 3? Also, what are your recommended settings? Tick all boxes or just the Kernel box? What devices/ROMs has it been tested on? Sorry for all of the questions! :laugh:
i just used the xperifirm tool to get the latest z2 .323 update, then used flashtool to create .tft, then your prfcreator tool to make the flashable zip. everything worked perfectly fine (many thanks to the dev's for all this nice and easy to use tools btw), this .zip rom should now be flashable from twrp (i got a locked and unlockable BL) no matter what i have installed on the phone right?
Thanks for your help, i'm new to sony devices and my z2 is only 20 days old, i'm trying hard not to brick it
Wow! Is this magic?
Xperia™ Z (C6602) with Tapatalk!
There was a dev who would create pre-rooted images you could flash on Galaxy S3 phones... that was something very cool!
So, I should be able to flash the zip this creates and have a "pre-rooted" phone image...
I'd half thought you were creating a root-injected FTF file... but this is actually pretty cool as well... (saves the pain that I normally go through to root the image after flashing it... thankful I have an unlocked boot loader...)
nalab1 said:
Thanks for the reply... What is sin version 3? Also, what are your recommended settings? Tick all boxes or just the Kernel box? What devices/ROMs has it been tested on? Sorry for all of the questions! :laugh:
Click to expand...
Click to collapse
The first byte of a sin file (contents of ftf file, the ftf is just a zip) is the version. Currently Sony uses version 3. Well if I would create a pre-rooted zip for myself I would tick all the boxes. I have tested the tool a handful of times on my Z1C.
ptmaniac said:
i just used the xperifirm tool to get the latest z2 .323 update, then used flashtool to create .tft, then your prfcreator tool to make the flashable zip. everything worked perfectly fine (many thanks to the dev's for all this nice and easy to use tools btw), this .zip rom should now be flashable from twrp (i got a locked and unlockable BL) no matter what i have installed on the phone right?
Thanks for your help, i'm new to sony devices and my z2 is only 20 days old, i'm trying hard not to brick it
Click to expand...
Click to collapse
Good to hear. And yes, that is correct. I still recommend to take a backup in TWRP before flashing it (just to be on the safe side).
scifan said:
There was a dev who would create pre-rooted images you could flash on Galaxy S3 phones... that was something very cool!
So, I should be able to flash the zip this creates and have a "pre-rooted" phone image...
I'd half thought you were creating a root-injected FTF file... but this is actually pretty cool as well... (saves the pain that I normally go through to root the image after flashing it... thankful I have an unlocked boot loader...)
Click to expand...
Click to collapse
It's actually not possible to create modified FTF as Sony uses RSA2048 signatures. And yeah, the tool is mainly aimed for those on locked bootloader
NICE! I was just waiting for a root method for my Xperia M2 with KitKat.. The only problem is that there's no Dual-Recovery for it... Would be possible to try the T2U Dual-recovery on my M2?
Very clever, thanks!
Make for samsung please...
linuxct said:
NICE! I was just waiting for a root method for my Xperia M2 with KitKat.. The only problem is that there's no Dual-Recovery for it... Would be possible to try the T2U Dual-recovery on my M2?
Click to expand...
Click to collapse
+1
after finish, app create zip and 2yn file. is it safe to delete 2yn file?
najar360 said:
after finish, app create zip and 2yn file. is it safe to delete 2yn file?
Click to expand...
Click to collapse
What is the filename of the second file? Are you sure it's created by PRFCreator?
Hi @zxz0O0
Thanks for your reply! This is definitely for locked bootloaders - correct?
Regards,
Alan
I wanted to start a thread with the Frequently Asked Questions regarding the CM12 port of our beloved Galaxy S3 (GT-I9300)
Download
Latest version:
JustArchi said:
Beta 1 Download
Alternate Download via Google Drive
Alternate Download via 4shared
MD5: 46dbfa5cb28e0d4927c24d4c8cb75f87
SHA1: bcfc03c36acb5d6a861e2a188422364008a32dc8
Working:
- updater-script (flashing)
- kernel (booting)
- OpenGL (CPU rendering)
- MALI blobs (GPU rendering)
- HWComposer (not updated to latest nameless release)
- Rotation
- Camera
- WiFi
- Bluetooth
- NFC (Android Beam)
- Sensors (ALL!)
- Internal / External SD Card
- Vibration
- GPS
- RIL
Changelog
- Android 5.0.2
- Updated CM Sources
- Fixed Wifi issues
- RIL completely working
- Stock Camera working
- Bootloop Issues fixed
This is NOT A STABLE BUILD.
I STRONGLY suggest to use only stock kernel bundled with the ROM and ArchiKernel V1.6+, unless you want to face other issues
If you like what you're flashing, support your fellow i9300 developers: JustArchi, Moster2, arter97
Big kudos and thanks to dhiru1602
Manifest / Sources
XDA:DevDB Information
[WIP] [Beta 1] [2014-12-22] CyanogenMod 12 for i9300, ROM for the Samsung Galaxy S III I9300
Contributors
JustArchi, Moster2, arter97
Source Code: https://github.com/ArchiDroid
ROM OS Version: 5.0.x Lollipop
Version Information
Status: Alpha
Created 2014-11-12
Last Updated 2014-12-23
Click to expand...
Click to collapse
GAPPS download
Where can I download the latest GAPPS (Google Applications)?
https://s.basketbuild.com/gapps
Use the CM12 download link
Bugs
Known bugs:
smart lock with NFC crashes settings
Mobile network is always half the signal strength
Mute not working in calls
Message while flashing in recovery
I'm getting a message: "mount failed dev/block/mmcblk0p12 at /data: Device or resource busy"
That is because of the new type of flashing. It's still flashing though and takes a while. Be patient.
Bootloop
My device bootloops! What can I do?
Before thinking your device is bootlooping, give it at the very least 5 minutes, art takes a while to optimize during the 1st boot.
If that doesn't work, try philz latetst touch recovery.
Get it here
Download the .tar file if you want to flash using Odin.
Use the .zip file if you already have a custom recovery (CWM, TWRP etc)
If that doesn't work, get usefull logs.
See here...
Keyboard isn't working
[EDIT]
SOLVED IN BETA1!!!
Whaaa, I have no keyboard, whats wrong?
Enable "Hardware" on Keyboard settings
No 3G/data
Moster2 said:
How to get working data
1. Download this small shell script here.
2. Put in on your internal storage /sdcard. Via file browser or
Code:
adb push data_on.sh /sdcard/
3. Open the terminal emulator app. Then type the following:
Code:
su
sh /sdcard/data_on.sh
Important: You need working root (supersu or superuser) and do this every time you enable 2G/3G data. Also, you have to have data enabled when executing this script.
Original Post: http://forum.xda-developers.com/showpost.php?p=56125262&postcount=17207
Also thanks to Marco Magliona who gave a hint to that.
Click to expand...
Click to collapse
No status bar
I have no status bar and no lock screen, whats wrong?
Did you flash any other kernel? Use stock embedded kernel (reflash ROM to use stock kernel)
Wifi problems
How can I get wifi working on my murata chipped S3?
Try this:
http://forum.xda-developers.com/showpost.php?p=56938378&postcount=739
SD-card problems
I'm unable to use my SD card!
EXT4 and a variety of other filesystems are not supported.
Only FAT32 is supported up till now (until CyanogenMod supports the orther filesystems)
Root
I lost root!
Flash SuperSU in recovery.
Download:
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
CM11 features
CM11 feature 'x' isn't working anymore/missing, when is it available again?
Don't ask for features or ETA's.
The devs are doing this in their spare time FOR FREE!
If you can, you can try to help by learning how to build and code the features (see Building your own CM12 build for the i9300 below)
Changelog
Mainly only new CM12 commits.
Best and easiest what you can do is check this site: http://www.cmxlog.com/12
Dual boot
Can I dual boot this ROM?
Yes:
Extended tutorial with screenshots here
well you can only dualboot LolliPop if it is 1st ROM, i.e you can not use multiboot.zip to flash the alpha CM12 to 2nd ROM directly
you have to backup current apps on the ROM,
wipe data/factory reset from Philz Recovery provided by arter97,
install the Alpha CM12 zip,
then flash arter97 kernel (4.0-beta1),
then flash multiboot.zip followed by the ROM you want and restore your apps when booting in the 2nd ROM
BUT...
- You can't do phone calls (IMEI and Baseband was OK)
- You can't pull down the notification bar, I tried, tried, one finger, two, staring it... but don't... T_T
Because of arter97 kernel
Nameless 2.0 commits
I found the commits of Nameless, can we use it to get 3G working?
No, those commits aren't complete yet.
See here
Building your own CM12 build for the i9300
Start learning by following this tutorial here:
http://wiki.cyanogenmod.org/w/Build_for_i9300
Donate
Awesome ROM, where can I donate to help the devs buy some beer?
You can donate on all dev on their profiles, all have option "Donate to me". Also You can see this option below my avatar on ledt this post. But don't forget I'm not developer.
Why FAQ thread here? And our i9300 is not Galaxy S2
Its Galaxy S3 Not S2
Sent from my GT-I9300
dmukhin said:
Why FAQ thread here? And our i9300 is not Galaxy S2
Click to expand...
Click to collapse
Could have posted it in General, I agree.
GT-I9300 = Samsung Galaxy S3
RoadXY said:
Could have posted it in General, I agree.
GT-I9300 = Samsung Galaxy S3
Click to expand...
Click to collapse
look at 1st post, you wrote wrong device name
I wanted to start a thread with the Frequently Asked Questions regarding the CM12 port of our beloved Galaxy S2 (GT-I9300)
Click to expand...
Click to collapse
I wanted to start a thread with the Frequently Asked Questions regarding the CM12 port of our beloved Galaxy S2 (GT-I9300)
Click to expand...
Click to collapse
first line of thread
this is not about development and should be in General forum!
SignalX said:
this is not about development and should be in General forum!
Click to expand...
Click to collapse
Already asked a mod for a move
jackq said:
look at 1st post, you wrote wrong device name
Click to expand...
Click to collapse
Thanks, got it, sorry.
Lil Geeky said:
first line of thread
Click to expand...
Click to collapse
Got it, thanks.
@RoadXY
I have installed cm12 alpha 2 (now update to 3) with multiboot zip as second Rom.... My first Rom is stock 4.3 and second Rom cm12 with working call.... I use the arter kernel In all the two Rom and I have last twrp
I do this:
-Have first Rom with arter kernel (beta2)
-go to recovery (last twrp) flash multiboot zip and, WITHOUT restart recovery flash cm12,gapps,arter kernel.... Than restart to first Rom and use aSwitch to go to second Rom.... Now you see cm12 bootanimation and WAIT a lot (I don't care how much time) first time I think is bootloop but after try again I'm waiting and is start.... After start i go again in recovery and after flash multiboot zip I flash the last beta of super Su to have full working root....
Hope this can helpful and add to faq
Added screens of cm+kernel version and aswitch to see I'm on second rom
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bjtmosfet said:
@RoadXY
I have installed cm12 alpha 2 (now update to 3) with multiboot zip as second Rom.... My first Rom is stock 4.3 and second Rom cm12 with working call.... I use the arter kernel In all the two Rom and I have last twrp
Click to expand...
Click to collapse
Thanks! Editted the OP
Anybody replying here? @RoadXY Just as we force disable back light can i Disable battery LED?
Umh I don't if you can use any led control app as light flow but you can try
bjtmosfet said:
Umh I don't if you can use any led control app as light flow but you can try
Click to expand...
Click to collapse
Okay
Does arter97 dual boot work only with cwm? Is it possible using twrp recovery?
Sent from my GT-I9300 using Tapatalk
@RoadXY Still no luck with YouTube video colour glitch. Turned on / off nu player. Same some video have glitch some don't. Any fix?
fosskevin said:
Does arter97 dual boot work only with cwm? Is it possible using twrp recovery?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Don't know, I dont dual boot, sorry.
This also occur if i stream YouTube from chrome browser
mjp93 said:
@RoadXY Still no luck with YouTube video colour glitch. Turned on / off nu player. Same some video have glitch some don't. Any fix?
Click to expand...
Click to collapse
No, not currently. But I'm no dev.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ok guys if you have had a Note 1, 2, 3 or 4 you may be familiar with my Sweet ROM series. Sweet ROM was the very first Note 4 custom rom released on either platform.
Those of you that know my Sweet ROM's from the Galaxy Notes will know I generally build a full ROM. I like to keep all the Samsung apps etc in though I do a light de-bloat of some apps available on Play Store. Users can delete what they want to lighten the ROM if they wish and know what they are doing.
ENJOY
Introducing Sweet ROM V3 based on the latest 5.0.2 Lollipop BOG1 Firmware for Tab S 10.5 T805/Y
SCREENSHOTS
CHANGELIST
[*]Samsung T805YDOU1BOG1 5.0.2
[*]Firmware release date Mon Jul 6 17:17:09 KST 2015
[*]Stock Kernel BOG1 T805Y
[*]Deodexed & zipaligned (Can be used with Xposed)
[*]latest SuperSU v2.49 (thanks @chainfire)
[*]busybox 1.22.1
[*]Enabled All Apps in Multi Window
[*]Multi Window quad view enabled plus ability to open popup apps at same time
[*]Tab S2 Accuweather widget
[*]Tab S2 Music Player
[*]Loud Volume warning removed
[*]Build prop tweaks
[*]init.d enabled without need for custom kernel (big thanks to @JustArchi)
[*]5 way reboot
[*]sub symbols in keyboard
[*]Brightness slider can be removed / added. Checkbox in settings/notifications
[*]Private mode working
[*]Call record
[*]External SD card r/w fix
[*]Knox removed
[*]Amaze File Manager
[*]Droid Over wifi
[*]Light de-bloat
[*]Screen mirror fix
[*]Extra languages enabled
[*]CSC features
[*]Extra toggles enabled
[*]Enable camera during call
[*]Enabled Edit After Screenshot. Set in settings/display
[*]Show total call time
[*]Enabled call button in Call log
[*]Extend speed dial to 100
[*]Removed screen capture sound
[*]Enabled sms call back number
[*]Enabled sms Folder View
[*]Enabled Call and Message block in Settings
[*]Enable save message
[*]Enable register to calendar
[*]SMS to MMS threshold increase to 999
[*]Enable message scheduling
[*]There's heaps more but I can't remember it all right now
REMOVED APPS
DOWNLOAD
Mega link - HERE
Md5 checksum 00255EA0D8872C23D060A7AEC9F2BD61
INSTALL
[*]You may want to do a backup of your data apps etc. I have made a quick guide HERE on how I backup and restore my apps in under 10 minutes after a data wipe
[*]Make sure you have backed up your imei (efs). There are a number of apps that do this. Or backup in twrp recovery. Keep in a safe place. (If done on previous version no need to do it again if kept in safe place)
[*]Download & place Sweet Rom V3 zip on internal or external SD Card
[*]I used twrp recovery from HERE. The TWRP-2.8.6.2-T805/T807 version worked fine on the T805Y when flashed in pc odin.
[*]Do a nandroid backup of your current rom
[*]If you are coming from 4.4 you must flash the lollipop bootloader or the rom will not boot. I have made a .md5.tar file that you can flash in PC Odin. Download it HERE. For a quick guide of how to install it see HERE (the guide is for Note 4 but it’s the same principle)
[*]Wipe data / factory reset
[*]Flash Sweet ROM V3
[*]Reboot & do a little dance, pat your head and rub your tummy at the same time while you're waiting for it to boot. Be patient as it takes a lot longer due to ART than 4.4.4 did
[*]Enjoy
MODS
ALL MODS TO BE FLASHED IN TWRP (OR CWM) RECOVERY. No wipes needed.
See post #2 in this thread for more mods
NOTES
The modem is not included in this rom. You will keep your current modem. To change modem flash with cwm. Modems available in Post #3
This is a T805Y Exynos ROM. It should work on T805 but you will need to flash a T805 kernel for everything to work.
This rom is built for standard dpi. If you wish to change it that is fine but I don’t take requests to fix dpi issues
I cooked this ROM for my own personal enjoyment and it works for me. *What works for me may not work for you. I merely put together what I like and use. If you don't like it then please don't flash it or even download it as it costs me personally for file hosting.
I AM NOT RESPONSIBLE FOR YOUR DEVICE. IF YOU CHOOSE TO FLASH THIS ROM OR ANY OF THE ATTACHED MODS THEN THAT IS ENTIRELY YOUR CHOICE IF SOMETHING GOES WRONG.
Thanks to those who have helped either directly or indirectly; chainfire, criskelo, kalangas, eybee1970, phil3759, goddamnit, bangsti, dsixda, kennyboyismr47, sdvsf, anoopva, routey, zylor, maskerwsk, xperiacle, majdinj, wanam, lindroid, mythtrandyr, kmokhtar79, Arsaw, Rovo89, FemBlack, jackyaway, tkari4, parkhyb, gharrington, CNexus, Unknownforce, crash1976, JustArchi, KindaJackedForANerd, namfat, kadiremrah, JoelDroid & any one I have forgotten (sorry).
Also massive thanks to those that have donated to this project. All donations help with my uploading and file hosting costs which I otherwise could not afford
V3 DISCUSSION STARTS POST # 88 - HERE
PREVIOUS VERSIONS
Introducing Sweet ROM V2 based on the latest 5.0.2 Lollipop BOE2 Firmware for Tab S 10.5 T805/Y
SCREENSHOTS
CHANGELIST
[*]Samsung T805YZTU1BOE2 5.0.2
[*]Firmware release date Mon May 18 21:18:38 KST 2015
[*]Stock Kernel BOE2 T805Y
[*]Deodexed & zipaligned (Can be used with new lollipop Xposed)
[*]latest SuperSU v2.49 (thanks @chainfire)
[*]busybox 1.22.1
[*]Enabled All Apps in Multi Window
[*]Multi Window quad view enabled plus ability to open popup apps at same time
[*]S6 Accuweather widget
[*]S6 fonts
[*]Loud Volume warning removed
[*]Build prop tweaks
[*]init.d enabled without need for custom kernel (big thanks to @JustArchi)
[*]5 way reboot
[*]sub symbols in keyboard
[*]Brightness slider can be removed / added. Checkbox in settings/notifications
[*]Private mode working
[*]Call record
[*]External SD card r/w fix
[*]Knox removed
[*]Amaze File Manager
[*]Light de-bloat
[*]Screen mirror fix
[*]Extra languages enabled
[*]CSC features
[*]Extra toggles enabled
[*]Enable camera during call
[*]Enabled Edit After Screenshot. Set in settings/display
[*]Show total call time
[*]Enabled call button in Call log
[*]Extend speed dial to 100
[*]Removed screen capture sound
[*]Enabled sms call back number
[*]Enabled sms Folder View
[*]Enabled Call and Message block in Settings
[*]Enable save message
[*]Enable register to calendar
[*]SMS to MMS threshold increase to 999
[*]Enable message scheduling
[*]There's heaps more but I can't remember it all right now
REMOVED APPS
DOWNLOAD
Mega link - HERE
Md5 checksum 77004FC0472B8969BCE6CA41DFAA8688
INSTALL
[*]You may want to do a backup of your data apps etc. I have made a quick guide HERE on how I backup and restore my apps in under 10 minutes after a data wipe
[*]Make sure you have backed up your imei (efs). There are a number of apps that do this. Or backup in twrp recovery. Keep in a safe place. (If done on previous version no need to do it again if kept in safe place)
[*]Download & place Sweet Rom V2 zip on internal or external SD Card
[*]I used twrp recovery from HERE. The TWRP-2.8.6.2-T805/T807 version worked fine on the T805Y when flashed in pc odin.
[*]Do a nandroid backup of your current rom
[*]If you are coming from 4.4 you must flash the lollipop bootloader or the rom will not boot. I have made a .md5.tar file that you can flash in PC Odin. Download it HERE. For a quick guide of how to install it see HERE (the guide is for Note 4 but it’s the same principle)
[*]Wipe data / factory reset
[*]Flash Sweet ROM V2
[*]Reboot & do a little dance, pat your head and rub your tummy at the same time while you're waiting for it to boot. Be patient as it takes a lot longer due to ART than 4.4.4 did
[*]Enjoy
MODS
ALL MODS TO BE FLASHED IN TWRP (OR CWM) RECOVERY. No wipes needed.
See post #2 in this thread for more mods
NOTES
The modem is not included in this rom. You will keep your current modem. To change modem flash with cwm. Modems available in Post #3
This is a T805Y Exynos ROM. I am not sure if it will work on other variants. Please let me know how it goes if you try
This rom is built for standard dpi. If you wish to change it that is fine but I don’t take requests to fix dpi issues
I cooked this ROM for my own personal enjoyment and it works for me. *What works for me may not work for you. I merely put together what I like and use. If you don't like it then please don't flash it or even download it as it costs me personally for file hosting.
I AM NOT RESPONSIBLE FOR YOUR DEVICE. IF YOU CHOOSE TO FLASH THIS ROM OR ANY OF THE ATTACHED MODS THEN THAT IS ENTIRELY YOUR CHOICE IF SOMETHING GOES WRONG.
Thanks to those who have helped either directly or indirectly; chainfire, criskelo, kalangas, eybee1970, phil3759, goddamnit, bangsti, dsixda, kennyboyismr47, sdvsf, anoopva, routey, zylor, maskerwsk, xperiacle, majdinj, wanam, lindroid, mythtrandyr, kmokhtar79, Arsaw, Rovo89, FemBlack, jackyaway, tkari4, parkhyb, gharrington, CNexus, Unknownforce, crash1976, JustArchi, KindaJackedForANerd, namfat, kadiremrah, JoelDroid & any one I have forgotten (sorry).
Also massive thanks to those that have donated to this project. All donations help with my uploading and file hosting costs which I otherwise could not afford
XDA:DevDB Information
[ROM][T805/Y] Sweet ROM Tab S 10.5 LTE, ROM for the Samsung Galaxy Tab S
Contributors
not-i
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Current Stable Version: V3 BOG1
Stable Release Date: 2015-08-08
Created 2015-06-04
Last Updated 2015-08-08
Sweet ROM Mods
MODS FOR SWEET ROM T805Y
Sweet ROM 5.0.2 Mods
INSTALL
All mods are installed by flashing in cwm/twrp recovery unless otherwise stated
3Minit Battery (for V2 BOE2) - HERE (mod thanks to @gharrington from his thread)
Stock systemUI for V2 BOE2 (TO REMOVE 3MINIT BATTERY) - HERE
T805/Y Modems
MODEMS FOR Tab S 10.5 T805Y
*LIST IS IN ORDER OF OLDEST TO NEWEST*
BOE2 Lollipop Modem for T805Y Tab S exynos only - HERE
BOG1 Lollipop Modem for T805Y Tab S exynos only - HERE
MODEMS FOR Tab S 10.5 T805
BOCC Lollipop Modem for T805 Tab S exynos only - HERE
INSTALL - Flash in twrp or cwm recovery. No wipes needed
PLEASE ENSURE YOU USE THE VERSION FOR YOUR DEVICE. CHECK YOUR DEVICE IN SETTINGS/ABOUT DEVICE BEFORE FLASHING CUSTOM ROM
T805/Y Kernels
KERNELS for T805Y Exynos
*LIST IS IN ORDER OF OLDEST TO NEWEST*
BOE2 Lollipop 5.0.2 Kernel for T805Y Tab S 10.5 exynos only - HERE
BOG1 Lollipop 5.0.2 Kernel for T805Y Tab S 10.5 exynos only - HERE
KERNELS for T805 Exynos
BOCC Lollipop 5.0.2 Kernel for T805 Tab S 10.5 exynos only - HERE
INSTALL - Flash in twrp or cwm recovery. No wipes needed
PLEASE ENSURE YOU USE THE VERSION FOR YOUR DEVICE. CHECK YOUR DEVICE IN SETTINGS/ABOUT DEVICE BEFORE FLASHING CUSTOM ROM
Either there is not much interest in the Tab S development or it seems I have a variant (T805Y) that not many people have. Anyway its just a little something I cooked up for myself and thought I'd share in case there was any 805Y users out there, apparently not, ha ha
not-i said:
Either there is not much interest in the Tab S development or it seems I have a variant (T805Y) that not many people have. Anyway its just a little something I cooked up for myself and thought I'd share in case there was any 805Y users out there, apparently not, ha ha
Click to expand...
Click to collapse
Well I have a Galaxy Tab S 10.5 T800. Not sure if this would work or not on mine. I may get brave and try it someday.
I installed it last night. Thank you not-i, all working well so far but wont have much chance to play with it until next week now. Also installed your modem and kernel but not 3Minit battery yet.
If it possible please cook sweet rom for SM-T705, too. Thanks very much in advance for your kindness
Matticus_Finch said:
I installed it last night. Thank you not-i, all working well so far but wont have much chance to play with it until next week now. Also installed your modem and kernel but not 3Minit battery yet.
Click to expand...
Click to collapse
Glad to hear it mate. It's working well for me too
naigigg said:
If it possible please cook sweet rom for SM-T705, too. Thanks very much in advance for your kindness
Click to expand...
Click to collapse
I can but I would need a tester as I don't have the device. I might give it a go on my days off if there is further interest in it as I support 2 variants of Note 4 that I don't own too.
The testers would need to be willing to test pretty quickly after I upload though so if that's you or someone else can let me know
not-i said:
I can but I would need a tester as I don't have the device. I might give it a go on my days off if there is further interest in it as I support 2 variants of Note 4 that I don't own too.
The testers would need to be willing to test pretty quickly after I upload though so if that's you or someone else can let me know
Click to expand...
Click to collapse
That's sound interesting.
naigigg said:
That's sound interesting.
Click to expand...
Click to collapse
Ok I'm cooking a T705 lollipop rom. Same specs as this one but with T705 BOE6 firmware
not-i said:
Ok I'm cooking a T705 lollipop rom. Same specs as this one but with T705 BOE6 firmware
Click to expand...
Click to collapse
That's Great!!
So, could you please include the flashable modem for T705 like your sweet rom v.14 on note 4, too.
And let I inform about some bug on the lastest sweet rom 910C/H as I found which it may occur on T705. I installed the rom for 4 days I found sometimes screen error. The screen displayed wierd icon on touch whiz. It haven't offen occured. Sometimes while turn on my device from stand by. Sometimes while I closed app and back to home screen. So, Please check this issued. Thank you very much.
Hey Boss, can this be installed on SM-T805 ? Would really love to, by the way your note series were really the bomb.
Aluyi said:
Hey Boss, can this be installed on SM-T805 ? Would really love to, by the way your note series were really the bomb.
Click to expand...
Click to collapse
If you are already on lollipop it should install and I don't include modem so you will keep your 805 modem.
Do a nandroid backup first then try and let me know how you go. I have heard some people with T805Y have flashed T805 roms with no issues
not-i said:
If you are already on lollipop it should install and I don't include modem so you will keep your 805 modem.
Do a nandroid backup first then try and let me know how you go. I have heard some people with T805Y have flashed T805 roms with no issues
Click to expand...
Click to collapse
Thanks Boss
naigigg said:
That's Great!!
So, could you please include the flashable modem for T705 like your sweet rom v.14 on note 4, too.
And let I inform about some bug on the lastest sweet rom 910C/H as I found which it may occur on T705. I installed the rom for 4 days I found sometimes screen error. The screen displayed wierd icon on touch whiz. It haven't offen occured. Sometimes while turn on my device from stand by. Sometimes while I closed app and back to home screen. So, Please check this issued. Thank you very much.
Click to expand...
Click to collapse
If you have an issue with one of my Note 4 roms please ask in its own thread please.
I have cooked a rom for the T705 though if anyone wants to try it let me know
not-i said:
If you have an issue with one of my Note 4 roms please ask in its own thread please.
I have cooked a rom for the T705 though if anyone wants to try it let me know
Click to expand...
Click to collapse
If you have time can you make one for the T700
Lollipop xposed is working on this rom
not-i said:
Lollipop xposed is working on this rom
Click to expand...
Click to collapse
Could you please send me where did you get your working version of xposed???
Supported builds:
AICP by k2wl for i9192
CM12.1 by F4K for i9190, i9192, i9195
CM12 by F4K for i9190, i9195
CM12 by k2wl for i9192
RESURRECTION by lsdty for i9190, i9192, i9195
SOKP by lsdty for i9190, i9192, i9195
FlexOS by lsdty for i9190, i9192, i9195
Team-UB by tioguda for i9190, i9192
Blisspop by tioguda for i9190, i9192, i9195
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you enjoy nightly builds but find all the steps necessary to flash a burden like me, you would be glad that I have achieved OTA updates for UNOFFICIAL builds. I have put together an OTA script that checks every hour for latest build and passes that download link as JSON response to CM Updater OTA app in settings. Example response:
Code:
{"id":null,"result":[{"incremental":null,"api_level":"23","url":"https:\\...\cm-12.1-20150603-UNOFFICIAL serranodsxx.zip","timestamp":"1433289600","mdsum":"23dcbc0c2ba6474f64566adde9d1f6d5","changes":null,"channel":"nightly","filename":"cm-12.1-20150603-UNOFFICIAL-serranodsxx.zip"}],"error":null}
The server :
Supports basketbuild and androidfilehost hosted builds.
Is a free host, with 87% uptime.
Does not host builds
Does not build deltas
Builds flashable zip for every ota supported
You must have TWRP recovery for ota's to work. If you don't have it, you can get it from HERE.
If you don't want TWRP on your device, you can manual flash updates from sdcard0/cmupdater with CWM or Philz.
Flash OTA zip for your device and build from http://ota.heliohost.org/zips/, you don't need to flash the zip again after an ota update as it is included in addon.d so it is restored after flash.
*files with _launcher add Updater to appdrawer (useful for non CM builds that don't have Updates in settings>About)
*files with _settings are CM stock
Server changelog:
new script. Once every 2 hours, generates response and zip for 10 builds in less than 30 seconds.
removed ota limit.
changed host.
set androidfilehost.com link limit to 5. [1/5 used]
added androidfilehost.com support.
changed build limit from 2 to 30. [7/30 used]
more optimization.
initial release.
If you want to host your own server [only one build supported], you can find the lite script for basketbuild and androidfilehost in attachments. Just add at first line $raw_url="your build's folder url" . I've added all functions in one file to be easy to set up. Just upload index.php to a folder in your host and set the link to that folder with the options bellow.
There are two ways to route OTA app to your server.
Open CMupdater.apk with hexeditor, search for https://download.cyanogenmod.org/api and replace it with the link to your server(Use Paste-Replace not Paste-Insert), then add that apk to OTA_template.zip from attachments in system/priv-app/CMUpdater.
Add cm.updater.uri= 'your server link' on your own build.prop file.
Thank you:
CyanogenMod for their work on OTA app.
k2wl for integrating my server link in your source.
All devs for keeping our devices updated.
julianxhokaxhiu for the insight on how the CMUpdater works.
Internet for php knowledge.
If you like my work, please consider donating.
Cheers !
To do:
Will update zip with addon.d to backup CMUpdater.apk at ota flash so that there will be no need to flash updater again. DONE!
If you want more features, post.
For security and performance concern, I decided not to add control panel for users to freely add builds to server. Just ask and if possible I will add the requested build to server.
Info:
This method can be used by any device or android version. Current zip builder makes zip only for lollipop, but if requested, I can add support for KitKat as well.
BioGenX said:
To do:
Will update zip with addon.d to backup CMUpdater.apk at ota flash so that there will be no need to flash updater again.
Click to expand...
Click to collapse
+1
big day has come for unofficial duos variant!!!
thanks !!!
Can I use the K2WL for the AICP 9.0 builds?
BioGenX said:
To do:
Will update zip with addon.d to backup CMUpdater.apk at ota flash so that there will be no need to flash updater again.
Click to expand...
Click to collapse
will you try to add basketbuild links to OTA script???
that way we can add aicp /cm to this script
Hey @BioGenX Thanks for your effort. I have few queries.
I am on F4K latest 12.1 CM for DUOS(9192) version with F4K kernel and I have flashed your OTA ZIP and now updates menu on setting options work, though no updates are shown as there is no update now.
What is the script for for? Is it of any interest of normal use or only for Devs?
Secondly on updates being available will the entire ROM get downloaded or it will only be an incremental update.
Lastly for CWM recovery users, since you have told that only TWRP us supported, please tell is where the update zip will be stored so that we may manually flash it through C also.
Lastly thanks again.
Pangadaywalker said:
Can I use the K2WL for the AICP 9.0 builds?
Click to expand...
Click to collapse
!This acts as official but is not official. The builds are downloaded from basketbuild.
This will work only if builds are uploaded to basketbuild.com.
The way the script works:
1. You give it basketbuild link ('https://basketbuild.com/devs/k2wl/cm12.1_i9192')
2. Searches .html for latest build ('https://basketbuild.com/filedl/devs?dev=k2wl&dl=k2wl/cm12.1_i9192/cm-12.1-20150601-UNOFFICIAL-serranodsdd.zip')
3. Provides direct download link (''https://basketbuild.com/dl/devs?dev=k2wl&dl=k2wl/cm12.1_i9192/cm-12.1-20150601-UNOFFICIAL-serranodsdd.zip) (replaces 'filedl' in link with 'dl')
3. Searches MD5 from .html
4. Passes MD5
5. Converts date from filename to unix time to get build time (This is what tells the OTA app if it's a new update)
To get any build you like you just change first link in script.
If you upload AICP to basketbuild I can add a script for it as well and make apk for it
parthabhatta said:
Hey @BioGenX Thanks for your effort. I have few queries.
I am on F4K latest 12.1 CM for DUOS(9192) version with F4K kernel and I have flashed your OTA ZIP and now updates menu on setting options work, though no updates are shown as there is no update now.
What is the script for for? Is it of any interest of normal use or only for Devs?
Secondly on updates being available will the entire ROM get downloaded or it will only be an incremental update.
Lastly for CWM recovery users, since you have told that only TWRP us supported, please tell is where the update zip will be stored so that we may manually flash it through C also.
Lastly thanks again.
Click to expand...
Click to collapse
The server script can be used for personal use. First time I used it was on my OPENWRT router. After 2-3 week test I decided to share as it is stable.
The OTA app download entire rom. For incremental it's more complicated and and you need builds on server.
For this you need to implement a REST server. Can find more details here: http://forum.xda-developers.com/showthread.php?t=2636334
The files downloaded by CMUpdated are stored in Internal Storage/cmupdater/
Pangadaywalker said:
Can I use the K2WL for the AICP 9.0 builds?
Click to expand...
Click to collapse
This script only works with basketbuild.com. But if K2WL uploads AICP on basketbuild in the future, i can make a script for it too.
Also please don't ask to implement it for Androidfilehost.com as it doesn't provide MD5. Without MD5 you can't flash OTA.
In development:
Mod update app to flash latest f4k kernel for f4k build when flashing ota.
BioGenX said:
In development:
Mod update app to flash latest f4k kernel for f4k build when flashing ota.
Click to expand...
Click to collapse
Just installed TWRP and your 1.1 mod.
Using i9195 (s4 mini LTE).
If I'll manually check for updates, Will it show the update that is specifically to my rom (F4k cm12.1) ?
Although my rom is based on latest june 3rd 2015, I see there's an update cm-12.1-20150603-unofficial , And I don't know if I should flash it because it's same date of rom i'm currently using....
fish72 said:
Just installed TWRP and your 1.1 mod.
Using i9195 (s4 mini LTE).
If I'll manually check for updates, Will it show the update that is specifically to my rom (F4k cm12.1) ?
Although my rom is based on latest june 3rd 2015, I see there's an update cm-12.1-20150603-unofficial , And I don't know if I should flash it because it's same date of rom i'm currently using....
Click to expand...
Click to collapse
Did you flash v1.1_OTA_CM12.1_F4k_serranotexx.zip ?
It shows that you have connection with the server. If there is a check mark next to the available update you can't/ don't need to download/flash as you already have the latest version. If you have something like a rectangle with an arrow, I think you flashed the zip for DUOS version.
BioGenX said:
Did you flash v1.1_OTA_CM12.1_F4k_serranotexx.zip ?
It shows that you have connection with the server. If there is a check mark next to the available update you can't/ don't need to download/flash as you already have the latest version. If you have something like a rectangle with an arrow, I think you flashed the zip for DUOS version.
Click to expand...
Click to collapse
oops....I prob. did Thank you for the explanantion.
I think I'll need to go back to an earlier rom, Since I see some functionality problems are still in Cm12.1 (Suddenly back and options front led key does not respond.....Happend to me before on cm 12/12.1 roms......
If devs would add their name in ro.cm.version in build.prop (ex. from: 12.1-20150603-UNOFFICIAL-serranodsxx to 12.1-20150603-UNOFFICIAL-serranodsxx-BioGenX) there will only be one zip needed for all devices and builds as the server would identify your device and build when you request a check for updates.
fish72 said:
oops....I prob. did Thank you for the explanantion.
I think I'll need to go back to an earlier rom, Since I see some functionality problems are still in Cm12.1 (Suddenly back and options front led key does not respond.....Happend to me before on cm 12/12.1 roms......
Click to expand...
Click to collapse
I had this problem a wile back. The way I clean install is by cleaning /system, /cache, /data and internal storage. This did fix it for me. Also if you flash an older version and use OTA to update, please post if it worked for you as maybe all the users that used this already have the latest version and I only checked it for DUOS, but there is no reason for it not to work. all i did was change the link to server and add basketbuild links for your device in to the server
I freshly installed about 20 times different roms for the past 2 weeks and even clean installed as you did,But it didn't solve it (I did most installed because of some shut down battery issues i have - But it's prob. the battery itself....)
It's ok, I'll use 10.2 for a while until cm12.1 will get some of the bugs gone.
Thank you very much Bio-G for the help you provided
fish72 said:
I freshly installed about 20 times different roms for the past 2 weeks and even clean installed as you did,But it didn't solve it (I did most installed because of some shut down battery issues i have - But it's prob. the battery itself....)
It's ok, I'll use 10.2 for a while until cm12.1 will get some of the bugs gone.
Thank you very much Bio-G for the help you provided
Click to expand...
Click to collapse
Can you try to disable led illuminate in buttons in settings app ? I see this is a fix for S6 might also work for you. I also have button led illumintion disabled
BioGenX said:
Can you try to disable led illuminate in buttons in settings app ? I see this is a fix for S6 might also work for you. I also have button led illumintion disabled
Click to expand...
Click to collapse
Thank you very much for the tip. I will make a note to myself about it next time I'll install cm12.1
OTA for androidfilehost.com
Good news!
I did some research on androidfilehost.com. It seems they provide an api for direct download and they do generate MD5.
At the time of my post the site is offline, but once it's online I can begin work on my script to support androidfilehost.com as well.
Will update until today/tomorrow OTA's all the UNOFFICIAL lollipop builds for our device if all goes well.
Cheers !
Server may be buggy/offline for today as I am working to optimize the code even more and try to implement androidfilehost.ro in the script
Cheers!
LineageOS is a free, community built, aftermarket firmware distribution of Android 6.0.1 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS / CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS / CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Important information:
This thread is for Unofficial LineageOS 13.0 builds for chagalllte (SM-T805). The following will not be supported here:
Custom kernels
Mods
Xposed
I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Installation
First time flashing LineageOS 13.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Make sure you are on the latest bootloader
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Install the Google Apps addon package (Optional)
Reboot
Known issues
SElinux set to permissive
No fingerprint (removed because of wakelock issue)
Other issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs! You can use this: https://play.google.com/store/apps/details?id=com.tortel.syslog
Downloads
LineageOS:
1/30
Addon SU
su binary is is not included anymore in the ROM, you have to flash it manually after
addon-su (choose (arm))
Google Apps:
http://opengapps.org/- thanks to the OpenGapps team!
The LineageOS / CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Source:
Kernel: https://github.com/CM-Tab-S/android_kernel_samsung_klimtwifi
Device Tree: https://github.com/CM-Tab-S/android_device_samsung_chagalllte
Credits:
@Barracuda77777 (For helping along the way)
@UpInTheAir for his kernel magic and misc fixes
@crpalmer (for picassowifi device and kernel gits - the base @Barracuda77777 and @nvertigo67 started of from)
@eousphoros (for his device git)
@nvertigo67 (for his work on chagallwifi)
@Nexorrr (for his work on chagalllte)
XDA:DevDB Information
[ROM][6.0.1][UNOFFICIAL][WIP] LineageOS 13.0 - SM-T805, ROM for the Samsung Galaxy Tab S
Contributors
deadman96385, Orphee
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Created 2016-11-17
Last Updated 2017-02-06
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Fingerprint does not work
Other issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs! You can use this: https://play.google.com/store/apps/details?id=com.tortel.syslog
I will not be compiling builds for chagalllte as often as i do for klimtwifi and klimtlte because i do not own it. I have shared this build so others can use it if they want to. I will only release a build that have been tested and confirmed working by my testers so that may slow down builds even more. This is because i do not want to release builds that do not boot or have serious issues to the public.
The ROM doesn't recognize my SIM card. I intalled 2 times and used factory reset both times. The only thing I installed is the ROM + Open GApps. I need a ROM with a working SIM Card. I tried several ROMs in this forum but none of them (the ones that are not based on official Samsung bloat!) seem to recognize the SIM. Is this a known issue with custom ROMs? Or am I missing something?
Thanks in advance for your replies.
alirezanoori said:
The ROM doesn't recognize my SIM card. I intalled 2 times and used factory reset both times. The only thing I installed is the ROM + Open GApps. I need a ROM with a working SIM Card. I tried several ROMs in this forum but none of them (the ones that are not based on official Samsung bloat!) seem to recognize the SIM. Is this a known issue with custom ROMs? Or am I missing something?
Thanks in advance for your replies.
Click to expand...
Click to collapse
I have no way of testing but @Nexorrr has working ril on this build.
My best guess would be is that you are using an older modem.
I guess there is something wrong in your T805 because I have fully work sim with CM 12.1 and ACIP 11 and PAC-MAN and all of them is non TW rom!
Try another firmware from another country ( for me I used Germany last firmware BOL1 and Baseband BOD3)
Still didn't try CM 13 !
My question is
What's kernel are using in this rom?
Sent from my SM-T805 using Tapatalk
So @NeWONEx,
you are using latest AICP11 and you can make calls? And data is working also?
T.
NeWONEx said:
I guess there is something wrong in your T805 because I have fully work sim with CM 12.1 and ACIP 11 and PAC-MAN and all of them is non TW rom!
Try another firmware from another country ( for me I used Germany last firmware BOL1 and Baseband BOD3)
Still didn't try CM 13 !
My question is
What's kernel are using in this rom?
Sent from my SM-T805 using Tapatalk
Click to expand...
Click to collapse
NeWONEx said:
I guess there is something wrong in your T805 because I have fully work sim with CM 12.1 and ACIP 11 and PAC-MAN and all of them is non TW rom!
Try another firmware from another country ( for me I used Germany last firmware BOL1 and Baseband BOD3)
Still didn't try CM 13 !
My question is
What's kernel are using in this rom?
Sent from my SM-T805 using Tapatalk
Click to expand...
Click to collapse
Currently just my stock CM kernel, but i will be moving it over to deathly for the next build now that i updated it for M.
Data is work with me .............. Good work
thermskin said:
So @NeWONEx,
you are using latest AICP11 and you can make calls? And data is working also?
T.
Click to expand...
Click to collapse
Sorry man! I meant AICP 10 [emoji26] your rom
Sent from my SM-T805 using Tapatalk
Ok then
T.
NeWONEx said:
Sorry man! I meant AICP 10 [emoji26] your rom
Sent from my SM-T805 using Tapatalk
Click to expand...
Click to collapse
mdda7 said:
Data is work with me .............. Good work
Click to expand...
Click to collapse
When you use titanium Backup , did you find menus or no ?
As well in Firefox !
Sent from my SM-T805 using Tapatalk
I used to install T805 roms on my T800. Any hope of doing this on this rom? Just tried on TWRP 3.0 and didn't have success.
I know is too early on the development but are planning to support t800 on this rom??
Sent from my SAMSUNG-SM-G920A using Tapatalk
Any idea if this will work on a T807T if flashed with the stock modem?
EDIT: It doesn't
deadman96385 said:
I have no way of testing but @Nexorrr has working ril on this build.
My best guess would be is that you are using an older modem.
Click to expand...
Click to collapse
Could you please help me? How can I update the modem? Should I install another official firmware before installing this? It's really confusing because I tried a lot of ROMs but none of them seem to recognize my SIM. It used to work before I switch to Lollipop CM ROM. Thanks.
---------- Post added at 11:42 AM ---------- Previous post was at 11:29 AM ----------
NeWONEx said:
I guess there is something wrong in your T805 because I have fully work sim with CM 12.1 and ACIP 11 and PAC-MAN and all of them is non TW rom!
Try another firmware from another country ( for me I used Germany last firmware BOL1 and Baseband BOD3)
Still didn't try CM 13 !
My question is
What's kernel are using in this rom?
Sent from my SM-T805 using Tapatalk
Click to expand...
Click to collapse
Thanks. Could you give me a link to the firmware you installed? So I should install that firmware before this and the data will work?
alirezanoori said:
Thanks. Could you give me a link to the firmware you installed? So I should install that firmware before this and the data will work?
Click to expand...
Click to collapse
Here http://samsung-updates.com/details/58969/Galaxy_Tab_S_10.5_LTE/SM-T805/DBT/T805XXU1BOL1.html
But you can use SamFirm to download it
Sent from my SM-T805 using Tapatalk
Waiting for the camera issue being fixed
NeWONEx said:
Here http://samsung-updates.com/details/58969/Galaxy_Tab_S_10.5_LTE/SM-T805/DBT/T805XXU1BOL1.html
But you can use SamFirm to download it
Sent from my SM-T805 using Tapatalk
Click to expand...
Click to collapse
Thanksss. I downloaded and flashed it. Everything's working now. Awesome. Thanks again.
---------- Post added at 10:34 AM ---------- Previous post was at 10:34 AM ----------
shepliu said:
Waiting for the camera issue being fixed
Click to expand...
Click to collapse
Same here
Did you include fingerprint fix already merged and rolled out in S5 branch? It should work also for tab S because they use the same sensor.