My tablet was stuck on the blinking Lenovo logo and I took the following steps -
Shut down TPT by pressing and holding the power button
Pressed and hld the power button until the TPT vibrated
Kept pressing and releasing the volume up button until "Booting Recovery Kernel Image" appeared in the upper left corner.
A long list (in yellow) detailed E: failures to open, mount various things followed
Scrolled to wipe data/factory reset/ delete all user data.
Followed prompt to reboot system now
Tablet vibrated, static lenovo logo appeared and then nothing further happened.
I'd appreciate advice and or counselling as this is the third time I've had a similar problem!
Related
I was running Liquid, booted into clockwork and installed MIUI. When I rebooted the phone it wouldn't go past the M logo. It shows up, then the phone restarts, and goes back to the M logo. Power up/down with the power button does nothing, and pressing power+x only brings me to the Android with an exclamation point. I tried to SBF, but when I plug my phone in, as the M logo comes up windows finds it, but then it continues to reboot and won't go past the M logo. I really just need to get to Clockwork and I can put a different ROM. Any suggestions?
If I remember correctly once you get to the android guy with the exclamation point you have to hit the search button and that will bring you recovery.
Either search button or volume up + volume down together, when you're on the exclamation point screen. You'll go into recovery mode and from there you can sbf.
with d2 g I can get to CWR
with phone off pressing camera button and plug in charger
Booting into Recovery
Power down the phone.
Slide out the keyboard.
Press and hold the X button on the physical keyboard.
Press the lock/power button.
Once you see a warning sign with an android robot appear, press the Search button on your physical keyboard if you're running 2.4.x firmware. For 4.5.x firmware, press Volume Up and Down buttons.
you could try
wipe cache and or wipe data
Bootloader
Boot the phone into SBF loader:
Power down the phone.
Slide the keyboard out.
Press and hold the up arrow (↑) key.
Press the lock/power button.
Once the SBF loader screen pops up, release the up arrow key.
these work for Droid2 g
Which MIUI are you flashing? I've flashed good and bad. I got good ones from rootzwiki and the most functional so far is 1.9.23
To get into Clockwork hit the down volume button when the blue light appears in the upper right-hand corner during the M logo. Select option 3, recovery, then latest recovery and you'll be in ClockworkMod.
As said above, wipe cache and data--I wipe davlik cache as well--then select zip to install.
Dear experts,
Phone model: Karbonn A9+
Rom: Custom Rom Hyperion Skyfall
When I hold the power button, the phone turns on and off, No problems with that.
However, when I press volume Up+Power, I get a green screen saying FASTBOOT at the top left corner and that’s it. Nothing happens from that point.
when I press volume Up+Power, I get a green screen and holding the buttons past that I get a red screen saying RECOVERY at the top left corner and that’s it. Nothing happens from that point.
However, when I press volume down+Power, I get a black screen saying ENTRY QPST DOWNLOAD at the top and that’s it. Nothing happens from that point.
I have to remove the battery to turn my phone off.
Moreover, I tried a factory reset erasing internal and external storage, after erasing when the phone is rebooted and gets stuck in the start-up screen. I removed the battery and powered on the mobile ,no problem at all the phone turns on but not resettted.
What I did?
Tried to install latest CWM through recovery, updated it but I pressed something instead of restart your device.
What should I do to make everything work again? I am a noob in Android, please be extra patient and illustrative
Many thanks in advance
same issue
Paalagan said:
Dear experts,
Phone model: Karbonn A9+
Rom: Custom Rom Hyperion Skyfall
When I hold the power button, the phone turns on and off, No problems with that.
However, when I press volume Up+Power, I get a green screen saying FASTBOOT at the top left corner and that’s it. Nothing happens from that point.
when I press volume Up+Power, I get a green screen and holding the buttons past that I get a red screen saying RECOVERY at the top left corner and that’s it. Nothing happens from that point.
However, when I press volume down+Power, I get a black screen saying ENTRY QPST DOWNLOAD at the top and that’s it. Nothing happens from that point.
I have to remove the battery to turn my phone off.
Moreover, I tried a factory reset erasing internal and external storage, after erasing when the phone is rebooted and gets stuck in the start-up screen. I removed the battery and powered on the mobile ,no problem at all the phone turns on but not resettted.
What I did?
Tried to install latest CWM through recovery, updated it but I pressed something instead of restart your device.
What should I do to make everything work again? I am a noob in Android, please be extra patient and illustrative
Many thanks in advance
Click to expand...
Click to collapse
I am facing the same issue...today i flashed "ClockWorkMod_Recovery_V6_-_Karbonn_A15.zip" . It was flashed successfully. But after that whenever I try to enter recovery mode using Power+ Volume up keys, it shows red screen... thats it....i do not see typical recovery screen menu. However the screen turns full white. Only option is to take out the battery and restart the phone.
PLEASE PLEASE PLEASE HELP
So i have no clue what i did but my phone first got stuck at the part where it shows the one plus logo in the middle and says "powered by android" at the bottom for seconds and it going black . But i figured out that if i hold the volume up button i can get to fastboot mode but i cant do anything else. Can someone please help me!!
Did you try installing any custom firmware, or android layer theme earlier? You might wanna try to boot into recovery and perform a factory reset. Press volume down, and hit the power button, after the Oneplus logo show, few seconds after, release the power button and keep pressing the volume down. The recovery menu will pop-up and then you can navigate to factory-data reset. Please not that doing this will wipe all your data and storage... so think it over. Let me know if this helps.
I purchased one of these last July and for the last month now whenever I have tried to turn the device on, I am permanently stuck on the 'Optimising system storage and applications...' page. It claims the updates will take around ten minutes but it has been several weeks now. I have tried a hard reset but holding the power button down for 40 seconds but on powering up again, just returns to the same page.
Can anyone assist please?
Did you try booting into recovery and doing a factory reset w/ cache wipe?
How do I do this please?
sspremchand said:
How do I do this please?
Click to expand...
Click to collapse
In order to execute a Cache Wipe, perform the following steps:
(1). Left hand holds both volume buttons down at the same time.
(2). While performing step 1 above, right hand holds the power-button down.
(3). Upon seeing "Amazon" logo on the screen, release right hand ONLY, while left hand still holds down both volume buttons.
(4). Upon seeing "Amazon system recovery <3e>" etc. on the screen, release left hand. Now follow the instruction on the screen to perform the "wipe cache partition".
Recently I have updated the firmware to 8.1. by using Odin successfully. However, the Internal Storage was reduced to the half only. In trying to fix this, I reflashed it with 'Nand-Erase' option checked (stupidly!). Then everything gone wrong.
- Bootloop (Struck on SAMSUNG logo)
- No recovery
I reflashed without checking 'Nand-Erase' but still not working, bootloop.
Then I installed/flashed TWRP from Odin again. It was successful, but very sadly I can't do anything:
- Unable to restore backup
- No Factory Reset/Wiping Date, Cache etc.
- No Power off
- Unable to Mount
- Internal Storage show 0MB.
Have you ever faced this problem? Can any one help me please. I am really in need of your suggestion and advice.
SOLVED!
After browsing through lots of pages, I found a solution which works for me. Even though my problem has been solved, I will just put the solution here, in case anyone may face the same problem with me. Follow the Steps below...
Reboot into Recovery (Press volume up, home and power button at same time)
Phone will reboot, leave power button but keep holding other 2 buttons.
After you see android/system update installing screen, leave these 2 buttons
Wait for few seconds and phone will show 'no command' then press volume button 3/4times and system recovery will open
with volume keys go to "wipe cache" and press power key.
after that select "wipe data/reset" and press power key.
after that select reboot phone and press power key
now phone will go to Samsung logo screen and you may think that it is again stuck in bootloop
But no, wait for some time->for me it was less than 4-5 min
and you will see the installing apps and other messages on screen
DONE!
Be Happy
Very considerate for you to post that info up for others. Thank you.