gapps help - General Paranoid Android Discussion

hello ben samsung galaxy ace 2 gapps I encountered this problem when installing on phone
unmounting system..
aborting ...
e. error in / storage /sd card 1 / pa gapps stock 4.4.4n 20140620 sinned (status) installation aborted
lütfen yardım edin

Ask in the gapps thread....
#stayparanoid

Related

Wildfire rom install prb.

Hi All. about 3 days trying to install to wildfire rom. gold card I did. I've downloaded too many RUU says all incorrect or customer ID error.
Old Sd card in the phone have an OTA file named OTA_Buzz_Froyo_HTC_TUR_2.34.468.31.28.468.3_releas e_166222nd4emyz0b4lcl3nv.zip
I try to install this file gives error (Status 7)
trying to install custom roms e: can not open / sdcard / update.zip (No such file or directory) error. Before i install custom roms, replace the device's 512 MB card to with 4 GB card its a real problem. Applanet installed. i downloaded rom manager to try with it, package installer says the problem occurred while parsing package device asking adjust time after every boot, When I try to install anything from memory card, with clockwork recovery gives error (Status 0), Pls help.

[Q] problems with lestatious via CWM

hi, im new to clockworkmod and need a few pointers sorry,
so i open up cwm and hit install ROM from SD card,
i browse to the "update.zip" for lestatious 1.9 and select it
i then tick backup existing ROM and Wipe dalvik cache
then click okay to reboot and install
now the problems start, the phone reboots to the screen with the "!" in a triangle with the android man, So i took out the battery,replace it and start up the phone.
The phone shows the bootloader and then
" "Waiting for sd card to mount (8s)
E:Can't mount /dev/block/mmcblk0pl
(orNULL)""
""Waiting for sd card to mount (7s)
E:Can't mount /dev/block/mmcblk0pl
(orNULL)""
""Waiting for sd card to mount (6s)
E:Can't mount /dev/block/mmcblk0pl
(orNULL)""
[/COLOR]
etc...
What can i do??
ive successfully flashed 1.8.5 btw
Anyone know?
You have to make a update.zip from his updater.bat
then by choosing the option in the terminal itself! transfer the update.zip to sd card
go to cwm recov and just apply update.zip thats it! dont choose this and that option!
Do this n temme!
Happened to me....u should ve waited in that android + exclamation screen....
Sent from my GT-I5800 using Tapatalk
vijacdblz said:
Happened to me....u should ve waited in that android + exclamation screen....
Sent from my GT-I5800 using Tapatalk
Click to expand...
Click to collapse
Hi, I tried this and CWM says
Finding update package
Opening update package
Verifying update package
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted
I found no problem....
How you flash it ?
Do you use STOCK JPM >> Lestat 1.8.5 >> Lestat 1.9 with CMW update.zip ??
Just copy file to sd card
In cwm press install update.zip
It will install and than press reboot system
If you have invalid file copy new valid one on sd card
Sent from my GT-I5800 using Tapatalk

[Q] Plz Help Me!Plz

I am install merruk karnel in creed 3.5 rom .
it install but now when i am open link 2 sd it say mount script invaild
and when i try to restore my back it show error
Plz help
Imtiaz369 said:
I am install merruk karnel in creed 3.5 rom .
it install but now when i am open link 2 sd it say mount script invaild
and when i try to restore my back it show error
Plz help
Click to expand...
Click to collapse
Did you install as well the ext.4 zip of merruek's kernel? if you did and you have already partition your sd card with sd/ext 4,,just choose ext 4 as your mount location then you can run link2sd..

[Q] CWM can't mount sd card

hi
I rooted my galaxy s3 GT-I9300 about two days from now (4.1.2)
and I downloaded MOD from this forum
so I went to recovery CWM to install this MOD
I pressed install ZIP then choose ZIP from sd card
but nothing happens only I saw below
E: can't mount /sd card/
so what's the problem ??
There's a section dedicated to troubleshooting, and it's not General

Shendu OS For Lava iris 504Q port by naeem210

Shendu OS For Lava iris 504Q port by naeem210​
Pre-rooted
Only 244 mb
Better ram management
Better battery backup
Otg Working
Flipcaver Lock Working
And Many More​
Installation :
Copy zip file Sd Card
Reboot into recovery
Wipe data/factory reset
Wipe cache partition
Wipe dalvike cache
Wipe system
Select zip from SD card and install​
Caution:
I am NOT responsible for any damage caused to your device. Flash at your own Risk!​
Download Link Full Rom:-​
https://docs.google.com/uc?id=0B2Ddi-DetFSLLS1qdlhPNHBUbnc&export=download​
​
Credits:
anatoli621
4pda
mee porting and testing 504q
HIT THANKS IF YOU LIKE THE ROM.....................​
around 600 mb ram free
sounds really goood
great sir
Great Work Naeem Sir..

Categories

Resources