Related
WELCOME TO
SAMSUNG GALAXY S3 mini VE
THREAD
Informations about VE
The new model runs Android 4.2 Jelly Bean out of the box (as opposed to Android 4.1), and has a 1.2GHz dual-core processor (an upgrade from the 1.0GHz dual-core CPU of the old model). And that’s it, the rest of its features remained unchanged, including a 4-inch display with 480 x 800 pixels, 5MP rear camera, 1GB of RAM, and 8GB of expandable internal memory.
CPU Marvell PXA986 / ARM Cortex-A9
GPU Vivante GC1000
chipset is a marvel pxa 986/pxa988 chip set
opensource code HERE
PETITIONS
BECAUSE I8200 IS A DIFFERNT MODEL FROM ORIGINAL S3 mini DOESNT EXIST MANY DEVS OR SOURCE.HERE IT IS SOME PETITIONS TO MOVAFUSION AND OTHER TO HELP AND SUPPORT US
PETITION 1 - PLEASE Click on it and sign.
PETITION 2 - PLEASE Click on it and sign.
ROOT-KERNELS-ROMS-RECOVERY-MODS & UNBRICK
BEFORE START..READ ALL CAREFULLY.IF YOU DONT UNDERSTAND DONT DO IT !!!
Samsung SIII mini Ve i8200/N/L/Q is not same with i8190/N/L
DONT TRY ANYTHING FROM I8190
ROOT METHODS
1. Vroot http://vrootdownload.info/
Instructions
1. Download the rooting application. (This app can root many other devices)
2. Install the app. This is a Chinese app so I will guide you.
3. Start VROOT and root now!
4. Now we need to install SuperSU from play store to replace the Chinese root manager called ???? 1.0.4.
5. Go to play store and install SuperSU.
6. Start SuperSU and you will be asked for permission by ???? 1.0.4, choose ??(means allow). (Should be the right side option.)
7. SuperSU will prompt to install SU binary, go ahead with OK and it will display successful.
8. Now, freeze ???? 1.0.4 in titanium backup, just in case you need it again.
Note: If you uninstall straight away from app manager, you need to make sure SuperSU updated the binary.
9. Re-run SuperSU to make sure everything is alright. You will be prompt again to install SU binary, just do what it asked.
10. After that, you are rooted with SuperSU and ???? 1.0.4 will not be there anymore.
2. Kingo root http://www.kingoapp.com/
Instructions:
Just run the app
3. Flash SuperSU
install a custom recovery and flash the zip
HERE the link
RECOVERY
TWRP recovery (SAFE)
Link here
Link Attention with TWRP-Recovery. Data-Partition restore seems to be not right. At the moment please did not use it, because it can delete your data-partition. We have to investigate it further! Other partitions seems to be ok, but its a good Idea if you copy your important data also manually to a other storage (like PC) while you trying things of this thread.[/COLOR]
Philz Touch Recovery (safe)
Link [URL="https://www.dropbox.com/s/cviev1st9d3331z/PhilzTouch_recovery.tar.md5.zip?dl=0"]Here
Infos for Philz recovery:
Philz-Recovery seems to work fine for the Backup/Restore functions and also some zip-installations (be aware that not every zip is compatible with i8200!) .No workin boot image backup
Warning about the recovery:
Nevertheless, it is absolutely recommended to go to recovery ONLY WITH THE THREE BUTTON METHOD !!! To try it with the software/adb/startmenü "Reboot to recovery" will produce at the moment a bootloop, which can produce a "not easy to solve Softbrick". The three-Button-Method is safe!
Installation Guide for recoveries:
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the recovery file mda file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
*NOW Take a backup before continue
KERNELS:
Baroni kernel (beta)
==>KERNEL THREAD<==
ROMS:
ALL IS STOCK BASED ROMS
NO CM AOSP OR OTHER CUSTOM ROMS
1 First Custom ROM for S3 Mini Value Edition [TEST BUILD][NO WARRANTY]
NOT SAFE YET
HERE
FOR THOSE WHO DOWNLOADED ROM
HERE
2. [ROM] [STOCK] Deodex ROM for goldenvess-3gxx
[ROM] [STOCK] Deodex ROM for goldenvess-3gxx
3. [ROM][STOCK] aosp themed Rom for S3 mini VE
the link
4.[VE][ROM][STOCK]GoldenS5 Style for S3 mini VE
HERE thanks to
@Leandro Lopes (LL)
@Rodney -eu kk- (RDY)
@PaulRichter
5.[VE][ROM][4.3] for Samsung Galaxy S3 mini VE
the link
MODS:
DeOdex Stock APPs:
The Thread
Tweaks for stock firmware:
http://forum.xda-developers.com/galaxy-s3-mini/general/guide-i8200-perfomance-battery-tweaks-t2889289
Center clock and Battery percentage:
Use Xposed Instaler & Gravity box
* I am not responsible for bricked devices, dead SD cards
*If you are unsure about what you do or do not know
how to revive your mobile not do anything not from the below
* Me or the other members not our responsibility
if you destroy your mobile
UNBRICK METHOD:
You can find firmwares for i8200/N at http://www.sammobile.com/firmwares/ (Just search your model. Be careful with i8200 and I8200N maybe soft brick if install wrong!!!)
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Thanks to:
@greeneyes2910 for the recovery philz
@SolarPlexus for kernel and twrp recovery
@t-shock for this tweaks
@JynAlek for this helpness and the testing and beta test rom
@drumandbassfreak for [STOCK] Deodex ROM
@PaulRichter for the stock themed rom
Our phone will never asee how is to have a custom rom -_-
I rooted my GT-I8200L using Kingo Android Root and I still working on a port of CWM. Until now, no sucess... My english is poor, I'm brazilian!
Sent from my GT-I8200L using XDA Premium 4 mobile app
i hope to suceed to make a port
maybe someone will notice us and develop CM11
Does a new development custom rom ??
KwstPap said:
Hi !!!
Because no where doesnt exist a thread about Samsung s3 mini I8200/N aka VE I decided to make one!!!
A few people may have thiw specific model o s3 mini so there are no many tutorials roms cwm etc!!!
Here we will write anything we know about this smartphone.any question or anything else!!!
The new model runs Android 4.2 Jelly Bean out of the box (as opposed to Android 4.1), and has a 1.2GHz dual-core processor (an upgrade from the 1.0GHz dual-core CPU of the old model). And that’s it, the rest of its features remained unchanged, including a 4-inch display with 480 x 800 pixels, 5MP rear camera, 1GB of RAM, and 8GB of expandable internal memory.
[COLOR="Red"]ROOT[/COLOR] thanks to DanielCarbajal96 for tutorial
http://forum.xda-developers.com/showthread.php?t=2725346
ONLY WITH VROOT 1.7.6 no other apps can root s3 mini ve!!!
FIRMWARES
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
you will find the new firmwares on http://www.sammobile.com/firmwares/ (just search your model.be carefull with i8200 and I8200N maybe soft brick if install wrong!!!)
UnBrick
download a ofixiall firmware and and install it with the Odin
ROM & Recovery Mod
Not yet .maybe in future with someone make it!!!
Some Extras
Make it lighter!!1
delete Bloatware (delete useless sustem apps)
like
Not needed/redundant STOCK apps safely deleted with Titanium BackUp:
1. Chat On (Personally I use WhatsApp)
2. Chrome (I prefer Dolphin Browser)
3. E Mail (I keep G Mail instead)
4. Game Hub (Play Store is enough for me)
5. Google + (I use FaceBook only)
6. Help (Read XDA instead!!!)
7. Internet (Dolphin!!!)
8. Messenger (WhatsApp)
9. Play Movies (I don´t see movies in my phone)
10. Play Books (Same)
11. S Suggest (Google Play)
12. S Voice (Keep Voice Search of Google Now)
13. Samsung Apps (Google Play)
14. Talk (WhatsApp again)
15. Video Hub (Same as Play Movies)
16. Video Player (I choose MX Player)
Suggestions are accepted, of course.
Don´t forget 3 little things:
-Do a full BackUp first at all!!!
-Freeze the App before deleting it. And if it all keep working delete safely
-Clean up Dalvik cache
UPDATE: Also dafe to remove:
1. User manual
2. Yahoo Finances
3. Yahoo News
4. Live Wallpapers
thanks aavvaallooss
Center clock and % battery status bar
Samsung forgot to put a option about % battery on statusbar
We can put it witn Xposed framework and gravitybox
http://forum.xda-developers.com/xposed/framework-xposed-rom-modding-modifying-t1574401 thanks rovo89
I HOPE SOMEONE SOMEWHERE MAKE A CWM AND ROM FOR THIS MODEL !!!
HAVE A NICE DAY!!!
Click to expand...
Click to collapse
Hey
I'm looking for a scatter loading file i8200L VE , can you help me ?
Anyone know if someone is working on a kooked room-recovery for i8200?
Is there a timeline?
as you all know...CM development is made for free and developers decide if they want to start work on CM on a certain device.. we only hope that some developer will buy our I8200 and start work for it
georgedk said:
as you all know...CM development is made for free and developers decide if they want to start work on CM on a certain device.. we only hope that some developer will buy our I8200 and start work for it
Click to expand...
Click to collapse
That's why they need donation for new custom roms. They need to buy the specific device, so they can work with it
So we need to gather a donation and say what we want
Do we have any hope now? :victory:
Well let's hope so, I'm sick and tired of having to put up with the stock ROM. I have more problems with it than a custom ROM for God's sake.
It appears that Galaxy S III Mini G730A have updated android to 4.4.2 Maybe will se it on our phone soon.
VallNAr said:
It appears that Galaxy S III Mini G730A have updated android to 4.4.2 Maybe will se it on our phone soon.
Click to expand...
Click to collapse
Our phones with the same features. Maybe Samsung publications, maybe someone will adapt
The Samsung source code i8200n
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=i8200n
there all all sources for all devices,not only i8200N... anyway..maybe will have an official upgrade since ATT made possible KitKat
Come on .A Dev to port something.there are a lot people want a Cwm or a rom
I think us developers doesn't take it seriously
hazar1907 said:
I think us developers doesn't take it seriously
Click to expand...
Click to collapse
We must show them that we are lot of people want a recovery or a rom or port some of them
any news about the recovery
Q&A for [INDEX][AIO][Rooting,Guides,Recoveries,Roms]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Is installing a custom rom remove/improve problems in xolo q700
Well I have been using my q700 for 1 year and exactly just after 1 year (after the warranty peroid is over) the mobile has been having many problems mostly hardware related. Just like the other mobiles out there its having the misbehaving touchscreen problem and the capacitive buttons have gone dead( havent had the swollen battery issue). I highly suspect this to be more like a software issue thats been generated by xolo after a particular period of usage of the handset. Or I may be wrong but every user have been starting to have this problems after 10-11 months of usage.
and I have not used my mobile much except for few phone calls (its my secondary cell). So my question is whether it is possible to inject such problems by above mentioned method and now can I use any custom rom that will remove such problems? Or is it just a hardware issue that everyone faces?
titanx8888 said:
Well I have been using my q700 for 1 year and exactly just after 1 year (after the warranty peroid is over) the mobile has been having many problems mostly hardware related. Just like the other mobiles out there its having the misbehaving touchscreen problem and the capacitive buttons have gone dead( havent had the swollen battery issue). I highly suspect this to be more like a software issue thats been generated by xolo after a particular period of usage of the handset. Or I may be wrong but every user have been starting to have this problems after 10-11 months of usage.
and I have not used my mobile much except for few phone calls (its my secondary cell). So my question is whether it is possible to inject such problems by above mentioned method and now can I use any custom rom that will remove such problems? Or is it just a hardware issue that everyone faces?
Click to expand...
Click to collapse
flashed baidu rom today eve; and i jst love it .. jst one issue.. while on call the volume is very low; i tried acessing mode as per xolo q700 ; bt it didnt worked... can u pls do smthng abt this .... kicakss rom tough ..... grt job:good::good:
android 4.4.2 kitkat from modded from from cyanogen mod 10.1
I m using a custom rom called project doge in my xolo q 700 since more than 4 months. It is cyanogenmod 10.1 working flawlessly.
Following r the details
Model no: Nexus 4
Android version : 4.4.2
Build no: DogeMod_v1
Developed by: back37 bgos10
other detail
shows kit kat logo
Sony walkman player installed with viper4android
xposed installer with gravity box, busy box, Xuimod
prerooted
ps: I have tried almost all the roms listed here by far i felt this as the best, without any glitch with butter smooth experience
i hav uploaded the screen shots here have a look
Flashing rom
I have a xolo q700i and I rooted it and installed cwm according to or instructions ..... I wanted somebody to tell me if the internal memory of the phone will be wiped if I flash any ROM with cwm ..... Thank u .....
recovery update not found (even after turn off wifi/mobile data)
i m new here, plz help, while using mobile uncle tools--> recovery update ---> ??
i can't find my xolo q700 recovery.img from several recovery.img( in wifi mode)
and also it shows nothing while i disconected from wifi ( no recovery.img file )
what to do ? reply soon
owner of this thread n all other user who owns xolo q700, may this will helpful to u
ROOTING, FLASHING NEW ROM, UPGRADING FIRMWARE, FLASHING RECOVERY FOR THE XOLO Q700 :
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
THE THINGS n PROCEDURES THAT ARE EXPLAINED HERE ONLY RELATED TO (MTK 6789 DEVICE) XOLO Q700 , I
DON'T SURE ABOUT OTHER DEVICE ( SO CAREFULLY TAKE THE DECISION):
Remember FOR PLAYING TRICKS WITH UR DEVICE IS NOT A FUNNY THING AT ALL, IF U HAVE PASSION FOR IT, OR U
HAVE TO EXPERIMENT WITH UR DEVICE, THEN N THEN ONLY DO THIS ALL STUFFS.
CONS : UR DEVICE CAN POSSIBLE OF GETTING BRICKED.
UR DEVICE WARRANTY IS NO MORE VALID AFTER ROOTING IT.
I AM NOT RESPONSIBLE FOR BRICKING OF UR DEVICE, IS BECAUSE MAY BE ON UR DEVICE, ON UR PC, SETTINGS
ARE NOT ALL THE SAME AS WITH MINE.
SO THERE ARE SO MANY CHANCES THAT U GOT LOST.
I TRIED TO EXPLAIN AS MUCH AS I CAN.
IF U FIND THAT THERE IS SOMETHING MISSING OR CAN'T ABLE TO UNDERSTAND THE PROCESS, THEN U SHOULD
GOOGLE UR PROBLEM FIRST.
HAVE BACKUP OF ALL NECESSARY STUFFS (CURRENT ROM , SCATTER FILE, IMEI) IS THE ONLY ADVICE I AM
GIVING TO U. HAVE FUN.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ROOTING :
USE KINGROOT.APK TO INSTALL QUICKLY
U CAN ALSO USE FRAMAROOT.APK FOR ROOTING IF THE FIRST OPTION NOT DONE SUCCESSFULLY.
OR MANUALLY ROOT Q700 VIA PC ( SEARCH IT ON YOUTUBE U WILL GET PERFECT VIDEO FOR THIS,NO WORRY AT
ALL)
u can also root it via mtkdroidtools.exe via pc.
------------------------------------------------------------------------------------------------------------------------------------------------
FLASHING CWM RECOVERY ON xolo q700 :
U NEED ;
download mobile uncle tools.apk from play store,
download cwm recovery for xolo q700 files . . .
_________________________________
put downloaded CWM RECOVERY.IMG FILE into sd card's root folder. ..
(main recovery.img file should be mandatory to be in root folder of sd card for detected by mobile uncle tools.)
after downloading, open mobile uncle, go to recovery update --> where will u find the recovery.img file from your sd card. .
.install it.
and your xolo q700 device is flashed with cwm recovery successfully.
--------------------------------------------------------------------------------------------------------------------------------------------------------
FOR UPGRADING XOLO Q700 DEVICE'S FIRMWARE TO XOLO Q700i'S FIRMWARE ::
u need;
vcom mtk 6589 drivers
mtkdroid tools.apk
sp tools.exe (use latest one, or go for version that is best suited for this device. i used is the version 3.1316.0.150)
q700i firmware
___________________________________________
make sure you logged into win 8.1/WIN 8 with "disable certificate force check" mode . .
( u will find it in "change pc setting", under "recovery and update" ---> "startup option " --> advance startup
reboot and select 7 no. for disabling the force check of certification . . .( mandatory)
pc will reboot.
then install vcom driver for mtk 6589 device manually ( mandatory)
manual process : go to my computer --> right click "manage" --> go to "device manager" --> select the main root node--> and
right click --> select add legacy driver/device --> next next --> select the drive : locate the vcom driver folder in that go to win 7
folder ---> in that select file as per ur pc bit format --> next next --> select "install it anyway " --> next next -->finish
damn u manually installed the drivers.
NOTE :
IF there is more entry of drivers installation for the same mtk device. then first remove all the signs of previous installed drivers
by "usbdeview.exe" (google it if u don't understand the whole use of usbdeview.exe)
OPEN SP TOOLS
CLICK ON SCATTER LOADING --> SELECT THE MTK FILE FROM THE DOWNLOADED FIRMWARE OF Q700i
(DON'T CONNECT DEVICE DURING THIS TIME WITH PC)
THEN
REMOVE BATTERY, SIM, MEMORY CARD FROM XOLO Q700
THEN IN PC CHCK THE DL/DS CHECKSUM CHECKBOX
CLICK THE FIRMWARE-->UPGRADE BUTTON.
CONNECT UR PHONE WITH INSTALLING ONLY BATTERY WITH IT. DON'T SWITH ON IT. JUST PLUG IN WITH PC
USING DATA CABLE
THERE U GO SP TOOLS WILL FIND UR DEVICE N WILL START THE PROCESS OF UPGRADING THE FIRMWARE
BA
WAIT TILL THERE WILL BE A DIALOGUE BOX WITH GREEN CIRCLE APPEAR.
THAT SHOWS UR PROCEDURE SUCCESSFULLY FINISHED.
ENJOY THEN.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
FLASHING THE NEW ROM ON XOLO Q700 :
THIS IS NOT AT ALL BIG DEAL
U need;
-mtkdroidtools.exe
-mobileuncle.apk
-the desired rom's zip file in ur device's sd card in root folder (the top most one)
-ur device should have root permission and the recovery should be there..
REMEMBER FOR FLASHING ANY ROM U FIRST NEED TO ROOT UR DEVICE, 2ND IS THAT U HAVE TO UPGRADE THE
FIRMWARE OF Q700 TO Q700i'S FIRMWARE.
RECOMMENDED IS THAT : U SHOULD FLASH ANY RECOVERY BEFORE DOING FLASHING ANYTHING ON UR DEVICE,
AND ALSO BACKUP OF UR CURRENT ROM WITH "MTKDROIDTOOLS.EXE" SO IF ANY DISASTER HAPPEN WITH UR
DEVICE THIS WILL BE HELPFUL.
DON'T FORGET TO HAVE BACKUP OF UR IMEI AS WELL (BY USING MOBILEUNCLE.APK IS GOOD OPTION)
THIS IS SURELY NEEDED. SO HAVE BACKUP OF IT.
THEN ONLY U ARE ABLE TO FLASH ANY ROM.
THERE ARE TOO OPTION (there can be other options, but what i know is this only)
USE ROM MANAGER (BUT THIS WILL ONLY BE USEFUL IF U HAVE A PRIMEUM ROM MANAGER.APK)
2ND OPTION :
reboot ur device in recovery mode ( simple as hell, just switch off ur device, then press power button + volume up key
simultaneously . . . wait for a sec.
u will get recovery window.
select wipe data --> wipe all data --> yes
select wipe cache --> wipe cache --> yes
select zip from sd card --> select the desired zip file of other rom -->and there u go -- > process will start in some second. wait
till then.
after take neccessary steps as per ur requirement. and ur process of flashing new rom is successfully done.
after flashing new rom, restore ur imei's n all other necessory things.
may this help u guys. have a great day.
enjoy.
Xolo Q700 Flash Tools HELP!!!! phone almost bricked
Hi Everyone
I have flashed Xperia Z2 rom on and it was stuck on boot loop and had to format the phone using SP Falsh Tools, unfortunately i dont have backup of my phone and I am trying to flash stock rom downloaded from needrom.com but was highly unscuccessful as there are a lot of problems with the Scatter file and checksum file , now i am really left with a totally empty phone please help me !!
---------- Post added at 02:52 AM ---------- Previous post was at 02:47 AM ----------
dileep.betha said:
Hi Everyone
I have flashed Xperia Z2 rom on and it was stuck on boot loop and had to format the phone using SP Falsh Tools, unfortunately i dont have backup of my phone and I am trying to flash stock rom downloaded from needrom.com but was highly unscuccessful as there are a lot of problems with the Scatter file and checksum file , now i am really left with a totally empty phone please help me !!
Click to expand...
Click to collapse
If anyone knows how to revive this phone from a complete format please direct me to there or just help me with the flash files and the procedure, it would be really helpful :crying:
question
hi, m in xolo q700i now with xolo Q700, some user app icon showing shadow. any solution
hi guys i just revived my phone thanks to some help from the BLU GOOLE+ comunity
https://plus.google.com/communities/117846429749085694805
rigth so this is my first tutorial KIND since im using some compilation form other tutos!
ROM BLU_D980l_V11_GENERIC
https://mega.co.nz/#!qcY0FaQS!zXLo-MuVQY7AwxQpDIZkqU3cIyLY5D5sk0xNQ4_K_is
donwload and extract
then follow this steps
If you have any drivers installed for your BLU device uninstall them before seeing step 1.
1. turn off your PC, and turn it on pressing F8 constantly until you get a black & white menu to select "Disable driver signature enforcement"
2. Download & install BLU drivers (http://bit.ly/1GZSNV6)
3. Download & open flash_tool (http://bit.ly/1IJrTCR)
4. click scatter-loading then select the scatter file inside the ROM you downloaded (must be unzipped of course)
5. Change "Download" to "Firmware upgrade" (under scatter-loading file)
6. click download
7. take battery out of your phone and insert it again. make sure your phone does not turn on. (if phone has an internal battery then just make sure the phone is off)
8. plug in your phone to your PC
9. the green check mark means you're good to go.
enjoy
AND DONT PUSH OTA UPDATES WITH A ROOTED PHONE
jjvalor59 said:
hi guys i just revived my phone thanks to some help from the BLU GOOLE+ comunity
https://plus.google.com/communities/117846429749085694805
rigth so this is my first tutorial KIND since im using some compilation form other tutos!
ROM BLU_D980l_V11_GENERIC
https://mega.co.nz/#!qcY0FaQS!zXLo-MuVQY7AwxQpDIZkqU3cIyLY5D5sk0xNQ4_K_is
donwload and extract
then follow this steps
If you have any drivers installed for your BLU device uninstall them before seeing step 1.
1. turn off your PC, and turn it on pressing F8 constantly until you get a black & white menu to select "Disable driver signature enforcement"
2. Download & install BLU drivers (http://bit.ly/1GZSNV6)
3. Download & open flash_tool (http://bit.ly/1IJrTCR)
4. click scatter-loading then select the scatter file inside the ROM you downloaded (must be unzipped of course)
5. Change "Download" to "Firmware upgrade" (under scatter-loading file)
6. click download
7. take battery out of your phone and insert it again. make sure your phone does not turn on. (if phone has an internal battery then just make sure the phone is off)
8. plug in your phone to your PC
9. the green check mark means you're good to go.
enjoy
AND DONT PUSH OTA UPDATES WITH A ROOTED PHONE
Click to expand...
Click to collapse
Yes. Please don't I learned the hardware
Fantastic writeup!
Sent from my Z970 using XDA Free mobile app
bmxerkid954 said:
Yes. Please don't I learned the hardware
Fantastic writeup!
Sent from my Z970 using XDA Free mobile app
Click to expand...
Click to collapse
hello,can you send new link for the rom please,it s not anymore available,thanks
How to Flash Stock Firmware On your Blu Vivo Air
Hi Guys Today I'm gonna show you how to unbrick or flash stock rom
the drivers are same for all and procedure as well
here is video : https://www.youtube.com/watch?v=6T_YEXhW2qg
on your (fly tornado Kazam/Fly IQ4516 Tornado Slim/Gionee Elif S5.1 & Qmobile Noir Z7) & Blu Vivo Air
THESE 4 DEVICES are same and can be flashed with this official Firmware.
1)Download usb drivers for your device : http://www11.zippyshare.com/v/49JiXYy2/file.html
2)Download Sp Flashtool : http://www.needrom.com/wp-content/uploads/2014/06/SP_Flash_Tool_v5.1408.00.rar
3}Download Official Firmwares For
Blu Vivo Air : https://mega.co.nz/#!pwkSwSQb!SKa09MUl7enJjuj3YQa3Ay9E97DwryhbUiO-ux8QXb0
Fly Tornado Kazam : http://www.needrom.com/wp-content/uploads/2014/12/SW08_KAZAM_Tornado_348_2014_11_20.zip
Gionee Elif S5.1 : http://www.androot.org/gionee-stock-rom/gionee-s5-1-official-firmware.html
Fly IQ4516 Tornado Slim : https://cloud.mail.ru/public/d288ccc05db4/Fly_IQ4516_SW08.zip
4)Install Drivers.
5)Open Sp Flashtool as Administrator.
6)In upper Left Hand corner select options then option click on download and select check on "DA DL Allwith Checksum"
7)Select Scatter file from firmware folder and hit download (be carefull dont connect your device before clicking download)
8)Now turn off your device and volume down and connect your device throw usb cable Flashing should start.
9)After successfully Flashing disconnect your device and boot with power key that all.
IF THIS TUTORIAL IS HELP FULL THEN PLEASE SUBSCRIBE LIKE AND SHARE MY VIDEO THENKYOU.
coolsongs95 said:
Hi Guys Today I'm gonna show you how to unbrick or flash stock rom
the drivers are same for all and procedure as well
here is video : https://www.youtube.com/watch?v=6T_YEXhW2qg
on your (fly tornado Kazam/Fly IQ4516 Tornado Slim/Gionee Elif S5.1 & Qmobile Noir Z7) & Blu Vivo Air
THESE 4 DEVICES are same and can be flashed with this official Firmware.
1)Download usb drivers for your device : http://www11.zippyshare.com/v/49JiXYy2/file.html
2)Download Sp Flashtool : http://www.needrom.com/wp-content/uploads/2014/06/SP_Flash_Tool_v5.1408.00.rar
3}Download Official Firmwares For
Blu Vivo Air : https://mega.co.nz/#!pwkSwSQb!SKa09MUl7enJjuj3YQa3Ay9E97DwryhbUiO-ux8QXb0
Fly Tornado Kazam : http://www.needrom.com/wp-content/uploads/2014/12/SW08_KAZAM_Tornado_348_2014_11_20.zip
Gionee Elif S5.1 : http://www.androot.org/gionee-stock-rom/gionee-s5-1-official-firmware.html
Fly IQ4516 Tornado Slim : https://cloud.mail.ru/public/d288ccc05db4/Fly_IQ4516_SW08.zip
4)Install Drivers.
5)Open Sp Flashtool as Administrator.
6)In upper Left Hand corner select options then option click on download and select check on "DA DL Allwith Checksum"
7)Select Scatter file from firmware folder and hit download (be carefull dont connect your device before clicking download)
8)Now turn off your device and volume down and connect your device throw usb cable Flashing should start.
9)After successfully Flashing disconnect your device and boot with power key that all.
IF THIS TUTORIAL IS HELP FULL THEN PLEASE SUBSCRIBE LIKE AND SHARE MY VIDEO THENKYOU.
Click to expand...
Click to collapse
MAN! the owner of this video flashed the KAZAM STOCK SW on GIONEE ELIFE S5.1?
and THANKS about share the process with video to everyone with problems with this phone can try recuperate that ;D
and thanks too to show us more 1 Rebranded name of this Phone -> Qmobile Noir Z7
and we need try contact ours forums moderators to PUT all this Phones on unique Thread Menu to All people around world can found theirs phones on XDA :highfive:
DvDwx. said:
MAN! the owner of this video flashed the KAZAM STOCK SW on GIONEE ELIFE S5.1?
and THANKS about share the process with video to everyone with problems with this phone can try recuperate that ;D
and thanks too to show us more 1 Rebranded name of this Phone -> Qmobile Noir Z7
and we need try contact ours forums moderators to PUT all this Phones on unique Thread Menu to All people around world can found theirs phones on XDA :highfive:
Click to expand...
Click to collapse
bro actually i'm the owner of the video and aim of this video is to show you guy that you can flash any of these firmwares on your device by the way thanks bro:good:
coolsongs95 said:
bro actually i'm the owner of the video and aim of this video is to show you guy that you can flash any of these firmwares on your device by the way thanks bro:good:
Click to expand...
Click to collapse
thanks to share that INFO! ... i have this doubt at almost one month because russians already do that and inside stock rom the system apps have GIONEE.***.*** on description name...
because you say and show that we now can force the moderators to fuse the BLU Vivo Air and KAZAM Tornado 348 on same MENU.. an include the other names of that same phone and have a lot more developers talking and developing to this phone... :highfive:
Thanks for the wonderful info fellas! Do I need to unroot before flashing with this method? Or if I do factory reset? Does root work for the firmware in the op?
Tia!
jonup said:
Thanks for the wonderful info fellas! Do I need to unroot before flashing with this method? Or if I do factory reset? Does root work for the firmware in the op?
Tia!
Click to expand...
Click to collapse
i don't use the method yet but what i can tell is Unroot your phone by precaution... than use SP flash tool (before the tool flash the new SW/ROM he format everything i think... to not happens the incompatibility with old ROM binaries running on new ROM)
DvDwx. said:
i don't use the method yet but what i can tell is Unroot your phone by precaution... than use SP flash tool (before the tool flash the new SW/ROM he format everything i think... to not happens the incompatibility with old ROM binaries running on new ROM)
Click to expand...
Click to collapse
yes you can flash your devise without unrooting but when you flashing any of these firmwares select (Download Only) don't select
(Formate + Download) because if you select download only then it should be fine it will only flash firmware and restore your devise to fectory settings or if you select formate + download then it will also clear your imei number. i already did the second one cleared imei but how ever i menage to repair my imei i will make a video soon on how to repair your imei because it is little hard to repair on these devises and btw you can flash miui rom on any of these devises
coolsongs95 said:
yes you can flash your devise without unrooting but when you flashing any of these firmwares select (Download Only) don't select
(Formate + Download) because if you select download only then it should be fine it will only flash firmware and restore your devise to fectory settings or if you select formate + download then it will also clear your imei number. i already did the second one cleared imei but how ever i menage to repair my imei i will make a video soon on how to repair your imei because it is little hard to repair on these devises and btw you can flash miui rom on any of these devises
Click to expand...
Click to collapse
Yehp... i already read something about that on 4PDA... about Lost IMEI... and NVRAM Problem too... now what you can tell me about that NVRAM Problem.. what is that? on My "Developer Adventures" on Sony/Qualcomm SoC phones i don't remember about something like that... i really lost about some Developer Configurations on this phone like what we can modify on Kernel Source and what we don't can modify... some binaries can't be touch and compatibility with some ROM sources like AOSPA and similar OS to compile from scratch... CyanogenMOD 11/12/12.1 we need some custom drivers to can work with like Bluetooth, Wifi, GPU... and some modded Default configurations/Binaries from someone already make it work on other phone with Same SoC to we can have it working on our phone...
if you need help to create any Guide or Tutorial please contact me ;D i'm noob about MediaTek SoC Developing but i already have some experience with sony/qualcomm phones(Kernel and ROM from source developing)... i'm in contact with Spanish TeamForce to get some modded defaults from their Custom Kernel like undervolting table... :highfive:
Plz help my s5.1 says android billing error
Robin1812 said:
Plz help my s5.1 says android billing error
Click to expand...
Click to collapse
Pay dem bills man!!! Lol
Na but where is it giving that error?
I have read somewhere that russians have ported a miui rom for gionee s5.1, u guys have tested that miui ?
Robin1812 said:
Plz help my s5.1 says android billing error
Click to expand...
Click to collapse
Try install Lucky Patcher... than see what you can do do about it on youtube...
---
tedulus said:
I have read somewhere that russians have ported a miui rom for gionee s5.1, u guys have tested that miui ?
Click to expand...
Click to collapse
Yehp, Full Working.. is the MiUi v6 5.3.4 ... use Carliv CWM to flash :highfive:
Guys plz tell if i delete google +, hangouts, drive, playbooks, play neesstand what will happen to my phone i have root access
Robin1812 said:
Guys plz tell if i delete google +, hangouts, drive, playbooks, play neesstand what will happen to my phone i have root access
Click to expand...
Click to collapse
The apps will disappear. You won't be able to OTA.
do you have some links for that MIUI ?
Guys... if someone want to share the way you flash the Custom Recovery to me have an idea to create a tutorial explain that and more than one way to do it ;D
--
MiUi Have Update -> 5.5.29 -> LINK | Forum Link
Thanks, you saved my life
Hello and welcome everyone to my Noob-Friendly guide Feel free to press 'Thanks' and 'Subscribe' on the Youtube if you have enjoyed.
Video tutorial:
Written tutorial:
1. Root:
Its is too easy to root LG G3
- Go to Settings/ General/ About device/ Software info/ and then you need to press 'Build number' 7 times so you became 'Developer'
- Go to Settings/ General and there you will see new menu called 'Developer options', click on it, and check 'USB Debugging' click on 'OK' and you are ready to Root
- Navigate to 'Lg One click root' which you downloaded here: http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951 previously
- Install drivers on your pc (if you are using windows 8, 10, you will need to disable driver signature, check this video: https://www.youtube.com/watch?v=YafV2zlGA38)
- Drivers: http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425 , for MAC: http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00320110909
- Connect you phone to microUSB and then USB to pc, click 'Start' and after a few seconds you should press 'Ok' on your phone.
- Phone will boot into Download mode and flash necessary files.
- You do have successfully rooted you LG G3! Congratz
2. Installing recovery (TWRP)
This is one more easy step
- Go to Google Play store (after you rooted device)
- Search for 'Autorec' and choose the app for your device model (mine phone is d855 so i choosed d855 app)
- Download Autorec, open it, and after it loads press 'Flash TWRP'
- Your phone will boot into TWRP and you are ready for Android M
3. Navigating throught TWRP and flashing Rom:
- Before flashing any mod, rom or whatever you need to download it DD You can download whatever rom you want and you can find Lg G3 roms here:
http://forum.xda-developers.com/lg-g3/development
- I flashed CandySix for exemple. If you want working Google Play store you will need to download Gapps also.
- Go to 'Wipe' , then check 'data' 'cashe' 'dalvik cashe' 'system' , now swipe and you are ready to flash your rom
- Navigate to 'Install' and press the 'Romsname.zip' , swipe and you are done
- Now flash gapps the same way
- Reboot , and now you will need to wait about 10 minutes so the system can boot up.
YOU ARE DONE
Any thoughts?
Good idea. As I never rooted/installed any custom recovery on this phone, is really nice to get a fast tutorial, for when and if i will need it.
skate4life said:
Good idea. As I never rooted/installed any custom recovery on this phone, is really nice to get a fast tutorial, for when and if i will need it.
Click to expand...
Click to collapse
Glad i helped someone
Thanks Its a good informative post, however don't forget to mention you're helping the user to install a custom rom which isn't stock, just in case a few go thinking this is lg release.
This is for not stock rom i guess? Only aosp based 6.0 ?
AOSP / CM based. I think XenonHD is AOSP based, CM is well, cyanogen
So no. We shoud have stock marshmallow in the next days hopefully. You'll easily know when it happens by the ammount of hysteria around and posts
If you read the OP first post it mentions "flashed CandySix for exemple". CandySix is CM based
Still a good bet and a wonderful way to get into, CM13 (marshmallow version of cyanogen) is surprisingly fast and bugs are being ironed out everyday. Pretty much a daily driver for many users.
thanks OP for your work, but (because there's always a but) the title of the thread is a bit misleading. It should mention that this is not for LG's MM update...
donjamal said:
thanks OP for your work, but (because there's always a but) the title of the thread is a bit misleading. It should mention that this is not for LG's MM update...
Click to expand...
Click to collapse
It says it is unofficial sooo it is not mislending
KiaTheKing said:
It says it is unofficial sooo it is not mislending
Click to expand...
Click to collapse
It sounds like you know an unofficial way to update to mm. But it's ypur topic...
i am in tention guyz.. i have lg g3 d858hk variant . as described above i rooted it and by autorec tried to install the recovery and when i restarted it..it just show a lg icon and at top left corner gave an error of ''SECURE BOOTING ERROR'' its not going in safe mode nor in recovary ..when tried to put in download mode it show the download mode and the error at top corner and them after a few second shut downs to restart again ..please tell me how to unbrick it .... it was on offical lollipop
bravo2526 said:
i am in tention guyz.. i have lg g3 d858hk variant . as described above i rooted it and by autorec tried to install the recovery and when i restarted it..it just show a lg icon and at top left corner gave an error of ''SECURE BOOTING ERROR'' its not going in safe mode nor in recovary ..when tried to put in download mode it show the download mode and the error at top corner and them after a few second shut downs to restart again ..please tell me how to unbrick it .... it was on offical lollipop
Click to expand...
Click to collapse
Did you installed autorec for your phone version? Probably not. So now you will need to reinstall whole system using this guide:
http://forum.xda-developers.com/showthread.php?t=2785089
Can i get some links about Lg g3 D858HK
I don't want to be rude but I am starting to get a little annoyed with same questions repeating over and over on all threads so i decided to post some answers here where they could be easily accessed.
1. Q:""Can i flash this Marshmallow/Lollipop/Nougat rom over my stock KitKat?"
A:The answer in most cases is that you cant (except in ED300 CM12.1 Rom but its still preferred that you flash stock Lollipop firmware separately).For those who don't want to waste their time flashing Stock rom there is an alternative flash-able zip could be found here
- http://forum.xda-developers.com/len...itkat-lolipop-firmware-base-switcher-t3249046 - for A6000
- http://forum.xda-developers.com/lenovo-a6000/how-to/firmware-base-switcher-a6000-plus-t3411914 - for A6000 Plus.
2.Q:"Where can i find TWRP recovery for my firmware?"
A:Here you go
- http://forum.xda-developers.com/lenovo-a6000/how-to/twrp-development-wt86518-t3498524 - Lollipop/Marshmallow/Nougat recovery developed by TingyiChen
- https://drive.google.com/drive/folders/0B2xkkOmw_M2NNXlVYnFYZnRIZHc?usp=sharing - made by SevenMaxs
TWRP 2.8.6.1 Is KitKat only compatible recovery
TWRP 2.8.7.7 Is Lollipop only compatible recovery
TWRP 3.0.2.0 Is Lollipop/Marshmallow/Nougat compatible recovery
*I couldn't find official links so i uploaded files to my google drive if any developer has a problem with this he can DM me and i will update the links *
3.Q:"Does this rom support VoLTE?"
A:So long there isnt a rom that supports VoLTE (As far as i know).There is some lib or source code problem with VoLTE (idk i am not a developer).There is a thread about this topic here - http://forum.xda-developers.com/lenovo-a6000/help/lenovo-a6000-plus-volte-support-t3418004 -
4.Q:"Does this rom/kernel support OTG?"
A:No there is not.OTG support is a kernel feature that isnt available for our device.Maybe devharsh1998 is working on this maybe he isnt who knows be patient.
5.Q"Which rom is the best?"
A:Answer for this question is subjective you can always easily try couple of them.I like mshoaib7 ports i am currently on Nexus Experience ROM but i plan on switching to nougat soon.
6.Q"ED300 links aren't working?"
A:ED300 isn't developing for our device anymore and his thread links are not working but you can try some of the files that are on his androidfilehost folder
https://www.androidfilehost.com/?w=files&flid=96089
This isn't tested by me and since the development stopped they are not recommended since bugs can't be fixed anymore.
7.Q"My phone is bricked heeeellllppppp?!?!"
A:If you are stuck on a splash screen/bootlogo
Can you enter recovery by restarting your phone and holding vol+ and vol-.If answer is yes just reflash the rom or try different one.If you cant enter recovery mode but can enter fastboot mod by holding vol - when restarting the device then follow this quide :
https://forum.xda-developers.com/lenovo-a6000/how-to/how-to-bring-phone-to-life-fastboot-t3561070
If your phone is showing only black screen or isnt booting at all you can try QFIL unbricking method
Disclaimer:
Nothing of this is my work all credits go to the developers i am just trying to make it easier for the developers and to try and answer noobier questions that are flooding the development threads.If you think some answers need further explanations or you have some more questions feel free to PM me.Enjoy roms and happy flashing
Click to expand...
Click to collapse
Reserved
8.Q:How to change cache and data to f2fs
A:You need to have a recovery that supports f2fs thats burgexx and tingychan 3.0.3.0 and 3.0.2.0 twrp
Be ware all your data will be wiped!
Step 1: go to wipe format data type yes and wipe all
Step 2: Comeback slide the option "Slide to do factory Reset"
Step 3: Go to Advanced Wipe Section Select all Partitions "Expect SD-Card/External Storage"
Step 4: Wipe them all
Step 5: after wipe is complete select cache "Click on change file system type" and you will find f2fs option there hit it
Step 6: Do same for data that is Select "data " click "Change File System type" hit f2fs
Step 7: Flash Latest Rom & Gapps Reboot enjoy
Thanks to @somnath pal for his short but clear tutorial
Also you need to be sure that rom that you plan on using suports f2fs (dev harsh roms and some of the mshoaib ports)
And also kernel (for now only Phantom-Reborn)
9.Q:My IMEI is lost what should i do??!
A:Follow this guide
https://forum.xda-developers.com/lenovo-a6000/how-to/fix-signal-imei-lenovo-a6000-a6000-via-t3421021
10.Q:How to flash official firmware/rom?
A: Go to this thread,https://forum.xda-developers.com/lenovo-a6000/how-to/lenovo-a6010-plus-stock-rom-t3407963
find ROM for your device download it.Unpack zip transfer system.zip and yourregion.zip (yourregion.zip is optional and if you live in india its probably india.zip) and flash it in TWRP recovery.Go to wipe, swipe to factory reset then go to install and select system.zip ,swipe to install it then select yourregion.zip and swipe again,reboot.If you are having problems with TWRP flash stock recovery via fastboot or flashify etc..
Thanks for this thread but there are still a lot of noobs asking for volte
Hi, phone water damaged 2 days ago..
I tried and saved it. But now Camera and flash not working.
Whenever I open camera it says "stopped working".
Is there still water inside out? Camera?
What I can do?? I tried clean flashing latest RR ROM.
But it says the same thing.
Anything hardware related repair can be done from home?
How much it will cost for camera and flash repair? For a6000+
Thank you.
Can anyone pls make a latest miui rom for lenovo a6000 plus???pls,pls
When will you Create Android OREO 8.0 Based Custom ROM
For Lenovo a6000, Im very Excited about Android OREO ???
Im facing this network dropping issue in my lenovo a6000+. whenever i call someone network drops or sometimes when i try to load insta video.and its also effects second slot sim.pleasss help me im sick of this problem.any solution? Im using miui 8.2 stable custom rom .
amit.tiger12 said:
Hi, phone water damaged 2 days ago..
I tried and saved it. But now Camera and flash not working.
Whenever I open camera it says "stopped working".
Is there still water inside out? Camera?
What I can do?? I tried clean flashing latest RR ROM.
But it says the same thing.
Anything hardware related repair can be done from home?
How much it will cost for camera and flash repair? For a6000+
Thank you.
Click to expand...
Click to collapse
Its probably hardware problem.Camera or flat cable died from water.
Muzzamil Zamil said:
When will you Create Android OREO 8.0 Based Custom ROM
For Lenovo a6000, Im very Excited about Android OREO ???
Click to expand...
Click to collapse
I am not a developer i am just helping them.Dont spam threads with this question.Developers have life outside xda and when they manage to get it working they will share it with us
JovanSijacki said:
Its probably hardware problem.Camera or flat cable died from water.
Click to expand...
Click to collapse
I tried replacing other device camera..
I tried replacing it with Lenovo vibe p1m camera.
When opened camera application it shows front camera without any problem but does not show back camera.
How can I root my phone?
pampiii21 said:
How can I root my phone?
Click to expand...
Click to collapse
Install a custom recovery and flash a root solution from the recovery like magisk.
What is the safe overclocking value in lenovo a6000 1 GB variant (GPU..CPU)
Dennyave1
How do I install without the Android 9 PC and everything related to this process on the Lenovo A6000 with Android 5.0.2? Is this possibility of installation at all real (possible) ??? ... I am technical since birth technical antitalent, if possible I ask for a description of how to process to be successful answere !!! ?