Has anyone successfully connected a Verizon GN3 to an ASUS RT-AC56R router? I have been trying various settings for 3 days without any luck. If you know how to make this work (which it is supposed to do), then please post how you did it.
I am aware that I could use the GN3 as a WiFi hotpot, but I have a number of wired components throughout the house that are not WiFi capable.
Thanks
nukeboyt said:
Has anyone successfully connected a Verizon GN3 to an ASUS RT-AC56R router? I have been trying various settings for 3 days without any luck. If you know how to make this work (which it is supposed to do), then please post how you did it.
I am aware that I could use the GN3 as a WiFi hotpot, but I have a number of wired components throughout the house that are not WiFi capable.
Thanks
Click to expand...
Click to collapse
In order for you todo that you would have to set your router up as a repeater. Might be able to look up how todo that
Elokaynu said:
In order for you todo that you would have to set your router up as a repeater. Might be able to look up how todo that
Click to expand...
Click to collapse
Thanks.
The repeater mode only functions as a WiFi repeater. I'm looking to utilize a cable to connect via USB to phone. It sure seems to indicate that I *should* be able to make it work, somehow. For example:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I know that the phone itself works in USB tether mode, because USB tethering works fine when connected to a single computer.
Related
Is anybody else getting very poor tethering support from their galaxy S?
I'm on rogers using the bell GT-i9000m and it's just terrible. If i don't use a third party program like pdanet my SC2 games will time out after 20 minutes and the internet will be very slow, yet internet on my phone will be very fast (3/3.5g).
Before anybody asks why I am gaming on a tethered phone instead of having a land line it's because my barracks are old and aren't wired for cable/dsl.
So...is there any alternative like "Wired tether for root useres" for a galaxy S? It didn't work the last time i tried to launch it.
PS. I'm using the "PC Internet" button when you plug in usb, as Kies doesn't want to launch for me without internet.
You tried pdanet or easytether? both allow usb tethering and don't need root access.
update: guess I did not read your post properly. I had read that the wifi tether isn't as fast as the cell connection.
What is wrong with sticking with pdanet anyway?
Using the original tethering function present in the International Galaxy S phone and it works perfectily.
Don't you have that in the US models ?
dragonii said:
Using the original tethering function present in the International Galaxy S phone and it works perfectily.
Don't you have that in the US models ?
Click to expand...
Click to collapse
The Bell I9000m model also have the build in WiFi-AP tethering out of the box
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi
I've always had this WiFi problem that after about 5 minutes of usage the internet connection disappears on my phone but the WiFi logo stays.
This forces me to disable and reenable WiFi on my phone.
Later I discovered that this only happens with WPA secured access points.
WEP and non secured access points work fine.
I tested my phone with 3 routers. Same results for all. On my first 2 routers it wasn't a problem because I just set up WEP security.
With my new router I cannot do this because it has wireless N which doesn't support WEP...
Also this happens will all ROMs, even the stock ROM.
After Google'ing this issue I found out that I am not the only one having this issue...
Does anyone know if there's a fix for this?
No one knows what the issue is?
Wifi works fine here using WPA2 and AES, my router is an ASUS RT-N16 running Tomato USB firmware.
Alright, so I decided to run logcat to capture the moment when the connection drops.
Here's the image of the log window:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How I tested this:
1) Ran adb logcat in Windows.
2) Enabled WiFi connection.
3) Opened up YouTube, selected a 10 minute long video.
4) After about 4 minutes, the video froze, because it ran out of buffer.
LFSPovo said:
No one knows what the issue is?
Click to expand...
Click to collapse
use wifi fix from the market.almost had same problem in every custom rom.noproblem on stock.
Maybe you should try the WiFi libs from the FreeXperiaProject? Or a different ROM.
Sent from my X8 using XDA App
Ok, I've been around for a while among many of the popular android forums and I've seen many people state that they "know" someone who got a Novatel 727/760/etc working on their A500 or Xoom tablet but nothing substantial as to "how" they did it.
I know I can find plenty of threads detailing what is needed for Huawei branded modems and many of the custom roms already include support for these.
I'm hoping by starting this thread someone who "has" been able to get a Novatel dongle working might want to share how to get it done. Thanks in advance.
Bump...bump...
p.s. just to make this bump a little more signifigant I have found a temporary solution. I purchased a 3g router that works with my verizon 3g modem even though there was no supported manufacturer list prior to purchase, I made the leap and bought the WL330N3G made by ASUS. The router comes with a power supply but can also be powered of the A500's USB port making it very convenient but at the same time drains your battery.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.asus.com/Networks/Wireless_Routers/WL330N3G/
It took me about a half an hour to get it configured and connected. The USB modem list does not have any Novatel modems listed but leaving modem selection to auto seems to work. Once setup, it takes about 2-3min to boot up and be connected.
I upgraded the firmware but I think it has some heat and cpu issues as sometimes it seems to lock up and I have to reboot the unit but on most occasions I get several hours of 3G internet for my tablet and other devices.
figured I'd put a bump on this. Maybe someone can suggest a rom that has support for more than the typical Huawei branded usb modems?
Hi guys !
I'm coming here after having looked for an answer everywhere, checked the forums etc.
I actually find answers and topics with a similar problem but none helped me to fix my issue.
I have an Asus transformer T100TAF.
The wifi works well the first 30 minutes (sometimes it is an hour or two, it happens randomly) and then just stop working. Windows doesn't find any Wifi source (usually I can see the neighbours' wifi and of course mine). This logo show up :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The only way to fix it is to reboot windows (and then about 30 minutes after, or 1h/2h ... after, the wifi stop working again).
The troubleshoot tell me "''The Broadcom 802. 11abgn wireless SDIO adapter adapter is experiencing driver- or hardware-related problems"
I can connect on my network from my other devices.
I tried updating the wireless adapter drivers.
Thanks for helping guys !
Acer W4 820
I have similar problem. Sometimes it happens. Mostly with bluetooth on.
W4 820
Same here. But im on windows10.
I realized it usually happens when I try to connect to a WiFi with low signal strength. It tries than it crashes . And won't turn back on with the disable enable trick. I moved closer to the router and enabled it again and it connected instantly. What driver do u use?
Get a usb wireless card from amazon. Panda wireless is pretty good
Can anyone with an Asus router, such as the RT-N56U, tell me if the 6P will usb tether to the router?
I do this with my Note II. Gives my whole house internet using the Asus router instead of the phone hotspot, and also get the benefit of ethernet connections and a better wifi signal than the phone can provide. And only having one wifi network to deal with makes things so much better. My Note 4 just sits in a drawer because of this, since it can't be rooted. Which is a shame because it has a better radio and can get sometimes 80mbps+, when the Note 2 only gets around 50mbps.
Well in case anyone else has this question, I went ahead and bought the 6P. Can confirm it worked straight out of the box, didn't have to even change any settings on my Asus router. Just plugged it into the router USB port, and selected USB tether on the 6P.
And the speed is incredible at my house:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Good to know! Kudo's
thanks for the info... im pretty sure it will be the same for my RT-A68U
chaco81 said:
thanks for the info... im pretty sure it will be the same for my RT-A68U
Click to expand...
Click to collapse
Just to be clear, when I said I didn't need to change any settings on my router, meant because I had already set it up with a previous phone. If you've never set up the router to use a USB modem, you'll need to configure it. Very simple, at least on vzw, but not just plug and play.