Database Users

HD2's data cable.. is it micro USB?

I can't seem to find a usb to "whatever it is" wire selling..
is it a standard micro USB port?

leobox1 said:
I can't seem to find a usb to "whatever it is" wire selling..
is it a standard micro USB port?
Click to expand...
Click to collapse
yes... u r rite... itz a MICRO USB...

But it can't supply power to a USB device, so it can't be used like a PC USB port. It's only good for recharging and syncing.

so if i want to buy an additional wire, i look for a USB to MICRO USB wire right? no need to buy from HTC right?
cause i saw one usb that is smaller but it doesn't fit.. is there a MINI USB port too?
am confused

Stephen Selby said:
But it can't supply power to a USB device, so it can't be used like a PC USB port. It's only good for recharging and syncing.
Click to expand...
Click to collapse
Erm yes it can,

Actually better take the device with you. Sellers here told me there is like 7 different very similar connectors. However this one should be the standard micro USB, which is supposed to be universal charger/sync cable in the future (at least in EU).
And yes, of course, there is mini USB. And there even are more versions of mini USB, for example HTC used their own.

You had better use HTC cables. HD2 is microusb, but not all microusb cables are good for HD2. Like iPhone, it takes a large charging current, and many no brand cables cannot do it. I've got a third party cable that syncs only, but if charged from the PC, the HD2 will say that the charging current is too small. Battery actually drops when I connect HD2 to PC using this cable (because my options set it that backlight is always on when HD2 is connected). Other combinations are OK:
original cable + AC plug: charging OK
original cable + PC: charging OK
third party cable + AC plug: charging OK
third party cable + PC: "insufficient charging current"

Be careful with cables- you'd be better to buy the genuine HTC version.
Many USB/MicroUSB cables are for charging only, and don't have the data pins connected. Thats OK if you just want to charge it while you are away from your main PC or power supply.
You can also buy a miniUSB/MicroUSB adapter for charging using and older miniSUB charger, but again these don't have the data pins connected.

I bought a number of 3rd party USB to microUSB cables a month ago for sync and charging (office, PC, bedside charging), so far so good... no issues (maybe I'm lucky). The OmniaII uses the same connector, so I'm using the HTC car charger to charge both.

I bought Nokia's cable (for E71,N97,etc.) and it work just fine with charging from laptop. much cheaper than HTC in here.

if you are going for the cheapo option...
http://shop.ebay.co.uk/?_from=R40&_trksid=m38&_nkw=MICRO+USB+SYNC%26+CHARGE+CABLE+for+HTC+HD2+HD+2+Leo+T8585
i got a couple from ebay - arrived the next day. - charge/sync fine.

charger from iPhone
The iPhone charger coud be used for charging HD2. Just plug the microUSB cord instead of iPhones and ... voila. The same outputs

N86-8megapixel cable doesnt work..
So I managed to leave my HTC cable at work (2 days after getting the Telstra HD2 in OZ) and now I am on 4-5 days leave from work and really want to tinker with my phone. I think I may end up having to go back to work to collect the HTC cable - as below... challenge to get non-HTC cable to work.
I found that my wife's N86-8megapixel nokia has a similar micro-usb cable.
When connected to the PC the phone starts charging and the PC does the "doo-doop" sound a "appears" to connect to the phone, but active sync cannot detect the phone \ sync.
I see others have had success with nokia cables - I am wondering if there is something wierd going on.

USB cable

Probably a daft question!
Is there any reason I cannot use a "stock" non HTC usb cable for syncing / charging. Is the HTC cable any different to any others e.g. Nokia?
Surely one cable is the same as another!?!

You can use ANY USB/microUSB Data/Charge Cable ;-)
I also do so :-D

no, charging doesn't really works, not for most cables. Unless it is explicitly marked for HD2 or iPhone. It seems they follow a new specifications. Older cables do not carry as much current. With connected to PC via a third party cable, my HD2 pops up a screen saying that the charging current is insufficient.

You can use any USB 2.0 A Male to Micro 5pin Male. Basically the typical USB to micro USB cable. I'm using a Blackberry micro usb cable (plugged into laptop) to charge my HD2 at work.
Usually sells for $2-3, or less, for 1-2 feet cable. Overpriced if you pay more. I bought the BB cable from Amazon, though I usually buy cables from monoprice.com.

i have a cable that comes with the car charger that charges the device when connected to the pc but cannot be used to sync files. when connected through this cable, the pc does not recognize it at all as an external device as it recognizes a dvd, cd, etc. in its driver.

I'm using a Blackberry cable in the office and works like a charm; I have the original at Home.

please i neeeeeeed help

i try to connect a usb flash memory to my tab 2 and i follow a trick
i get female-to-female usb adapter and connected it to the galaxy tab 2 usb adapter (that comes with it in the box)
then connect to it a usb flash memory , but my tab didn't read any thing
so after searching,using my avometer and making tests between my tab and my lab i concluded that:
-the female-to-female usb adapter is working probably
-there is no 5v output on the usb male adapter so i think because that the terminal device can't be read
please help me, any one can explain that?
is the manufacture close that property or my android is crushed or must be a microcontroller in otg to work,.... or what??

hey ever body , where is the developers
where is the genius people
i need help

My guess is they sell an official USB reader for a reason...
Sent from my SGH-T679 using xda app-developers app

mon3esh said:
i follow a trick
Click to expand...
Click to collapse
Here is the trick I used:
http://www.ebay.com/itm/300701358749#ht_891wt_1037
Open wallet, buy fix
:silly:

The following link shows how to make your own OTG cable (for another device). http://tech2.in.com/how-to/accessor...sb-otg-cable-for-an-android-smartphone/319982. So there is some additional connection b/w pin 4 & 5 that makes it works as OTG cable.
Is it worth the hassle? I am not sure. I got OTG cable for $0.99 in ebay. Before buying it I tried female USB cable like OP and failed.

thanks for every one tries to help
i found the reason
the secret in the 30 pin connector
which its pins are grouped each group is serves another connector in the another side of cable
so the group of usb has a pin named otg responsible for turning your cable to otg cable
so in the usb male connector it is not connected
so i think that is why samsung didn't built in its tabs a micro usb port and built this port instead it "to can market its accessories"

[Q] Aftermarket USB 3.0 cables only charge, no data transfer/access in 3.0 mode

I was wondering if anyone is having similar issues with aftermarket cables.
I bought 2 cables that work fine in 2.0 for charging/data transfer.
When I put them into a 3.0 ports nothing happens, there is no prompt to access the phone, and the USB options do not appear on the phone.
I have downloaded the Samsung drivers, and tried 2 different PCs.
I have no issues using the provided Samsung cable.
Any ideas?

I haven't experienced this. Actually, I think the Samsung USB 3.0 cable that came with my phone was bad. When I used it, USB 3.0 would stay grayed out. I had another one for a portable hard drive and that one works fine with the phone. Maybe just try a different brand. These cables seem rather fragile.

LocoBaZuka said:
I was wondering if anyone is having similar issues with aftermarket cables.
I bought 2 cables that work fine in 2.0 for charging/data transfer.
When I put them into a 3.0 ports nothing happens, there is no prompt to access the phone, and the USB options do not appear on the phone.
I have downloaded the Samsung drivers, and tried 2 different PCs.
I have no issues using the provided Samsung cable.
Any ideas?
Click to expand...
Click to collapse
I purchased a 9ft Amazon Basics USB 3.0 cable and all is well. Connecting through a USB 3.0 port, my device was immediately recognized, and I had no problem transferring data files to and from the device.
My only guess would have been to ensure that your PC's USB 3.0 drivers are installed in order for the ports to work properly. Since you're not having any issues with the stock cable, I'm not really sure.
I don't know if it'll make a difference in this case, but I have USB Debugging enabled.

I have all of the drivers update and USB debugging. Think I just got some shoddy cables.
Sent from my SM-N900V using xda app-developers app

I have the same issue. When i use my Samsung cable nothing Happens, But when I use the one from Extenal HD it works Perfect

jncokilla said:
I have the same issue. When i use my Samsung cable nothing Happens, But when I use the one from Extenal HD it works Perfect
Click to expand...
Click to collapse
I called Samsung and eventually after explaining what a micro USB 3.0 cable is and how it is supposed to work, and how it is not working, they finally gave me a place to send the cable and they will supposedly send me a replacement. I'm not holding my breath though. I think I would have had better luck addressing the envelope to "The Twilight Zone."
Sent from my SM-N900V using xda app-developers app

If your 3.0 charger charges fine but is not recognized when plugged into a port I'd check the the port drivers and make sure they are up to date. But first plug into all of your ports. It could be that not all of the ports on your lap/desk top are usb 3.0 friendly. And I've seen instances where if the device has not yet been recognized it will not pick up the device theough a usb 3.0 link. So maybe first get your note recognized by using a 2.0 connector then backdoor with the 3.0 and see what happens.
samsung test all of their cords before they leave manufacturing so getting a dud is very unlikely yet not impossible.
As for the aftermarket cords I normally stick to belkin. Best build quality for a fair price.

ManOfBusiness said:
If your 3.0 charger charges fine but is not recognized when plugged into a port I'd check the the port drivers and make sure they are up to date. But first plug into all of your ports. It could be that not all of the ports on your lap/desk top are usb 3.0 friendly. And I've seen instances where if the device has not yet been recognized it will not pick up the device theough a usb 3.0 link. So maybe first get your note recognized by using a 2.0 connector then backdoor with the 3.0 and see what happens.
samsung test all of their cords before they leave manufacturing so getting a dud is very unlikely yet not impossible.
As for the aftermarket cords I normally stick to belkin. Best build quality for a fair price.
Click to expand...
Click to collapse
I have tried everything.
I plugged into 2.0 and the 3 options pop up to select a mode where 3.0 is grayed out. That menu closes when you unplug.
If you lock your phone while in this menu, you can change the port, unlock the phone and the menu is still there, but it will not allow me to select 3.0.
I have 2 3.0 ports on my laptop, 1 on the docking station, and 1 on my standalone.
None of them work with the aftermarket cable. I will take it as a loss as I really only need them for charging away from home.

LocoBaZuka said:
I have tried everything.
I plugged into 2.0 and the 3 options pop up to select a mode where 3.0 is grayed out. That menu closes when you unplug.
If you lock your phone while in this menu, you can change the port, unlock the phone and the menu is still there, but it will not allow me to select 3.0.
I have 2 3.0 ports on my laptop, 1 on the docking station, and 1 on my standalone.
None of them work with the aftermarket cable. I will take it as a loss as I really only need them for charging away from home.
Click to expand...
Click to collapse
That is indeed odd. Im not sure what to tell you. Hopefully someone will chime in and be of more assistance.

Try changing your network connections. Using usb3.0 puts on airplane mode. If u have wifi on or something it'll show greyed out. It might not be wifi but it's something similar. Saw the greyed out 3.0 the other day and changed a setting on my phone and it came back. Hope it helps.
Sent from my SM-N900V using Tapatalk

I am having the same issue. I have 2 white usb 3.0 cables that I bought online from china via ebay. They were supposed to be USB 3.0 compatible and they look similar to the original stock cable.
When I use the stock cable w/ my usb3.0 port in rear of motherboard, the phone prompts me to enable USB 3.0 mode. When I use either generic cable, it will only function in USB 2.0 mode (I get no prompt for 3.0).
I am running DarthStalker Note 3 Version 6 and 3.4.0_Compulsion Kernel_7.0 on Tmobile version Note 3
I am willing to sacrifice (cut open) one of my generic cables if anyone thinks they can help diagnose the exact cause

I am having issues finding an extra USB 3.0 cable that performs to the level of the one that came with my phone. (My OEM cable works great)
I think the issue is that the 3rd party cables use cheap, thin wire. They can put a micro USB 3.0 tip on it... but the thin wires can't carry the bandwidth.
This is most plainly noticeable by downloading an app that shows the current flow while charging. Try downloading "Galaxy Charging Current *Lite*" and charge your phone through various combinations of
cable (USB2, USB3, OEM, 3rd party)
receptacle (1A, 2A, OEM, 3rd Party),
USB port (USB2, USB3, motherboard, adaptor card)
...etc. Even wireless charging, if you're equipped.
(It should also be noted that the phone will throttle the current flow as it gets closer to full. You'll get higher flow at 30% than 76% or 96%... so keep this in mind as you try different configurations.)
I've found that I got the best current flow (1800mA) using the Samsung USB3 cable, connected to a powered USB3 hub's charging port (no data, just power). This would charge our 3200 mAH battery from 0 - 100% in about 2 hours. When I swapped in a cheap Amazon cable (CableMatters brand)... the current flow dropped to about 800mA... or 4 hours. I emailed CableMatters, and they confirmed that it's a design issue, and that the wires are thin. They were pretty plain about admitting it... and then told me to return the cables to Amazon.
I'm posting all of this useful information not only to be helpful... but also to ask for help. Has anyone found a suitable replacement for the OEM cable? I'm looking for a charging cable... I'm looking for thicker-gauge wires capable of sustaining high current flow.
Any help here? Thanks!

If you are not getting 3.0 speeds then it's not a 3.0 cable. There are many fakes on ebay and amazon.
Only buy Amazon Basics or Samsung branded cables sold by Amazon OR Samsung.
Sent from my SM-N900V using XDA Premium 4 mobile app

What's with the charging cable?

Anybody figure out why the both charging port and charging cable that the phone comes with, have what looks like a double plug? One is a common micro USB port, and it seems that I can charge the phone with any old Android charger, as it will fit in this port. The other kind of looks like a USB port that you'd see on a digital camera. Just wondering what this is for, and why the provided cable has both.
Thanks in advance!

Airman1947 said:
Anybody figure out why the both charging port and charging cable that the phone comes with, have what looks like a double plug? One is a common micro USB port, and it seems that I can charge the phone with any old Android charger, as it will fit in this port. The other kind of looks like a USB port that you'd see on a digital camera. Just wondering what this is for, and why the provided cable has both.
Thanks in advance!
Click to expand...
Click to collapse
It's a USB 3.0 port and cable. It allows for faster data transfer speeds when connected to a USB 3.0 port on a computer.
It's backwards compatible with USB 2.0, which is why you can also use the other cables with the phone.

bsweetness said:
It's a USB 3.0 port and cable. It allows for faster data transfer speeds when connected to a USB 3.0 port on a computer.
It's backwards compatible with USB 2.0, which is why you can also use the other cables with the phone.
Click to expand...
Click to collapse
Oooooohhhh!! So that's what a micro USB 3.0 looks like! Cool, good to know. Thanks for the help.

bsweetness said:
It's a USB 3.0 port and cable. It allows for faster data transfer speeds when connected to a USB 3.0 port on a computer.
It's backwards compatible with USB 2.0, which is why you can also use the other cables with the phone.
Click to expand...
Click to collapse
Great post. I did used USB 2.0 in past. But after read your post i am appreciate for using USB 3.0 port and cable.. How can i get it from ?

bsweetness said:
It's a USB 3.0 port and cable. It allows for faster data transfer speeds when connected to a USB 3.0 port on a computer.
It's backwards compatible with USB 2.0, which is why you can also use the other cables with the phone.
Click to expand...
Click to collapse
You are half correct.... The right side is the micro usb port the left side is MHL 2.0, another version of HDMI out. You need a $13 adapter for this to work. Why Samsung put both on the same cable beats me.
Reference:
http://www.engadget.com/2014/04/11/samsung-galaxy-s5-review/

rwideman said:
You are half correct.... The right side is the micro usb port the left side is MHL 2.0, another version of HDMI out. You need a $13 adapter for this to work. Why Samsung put both on the same cable beats me.
Reference:
http://www.engadget.com/2014/04/11/samsung-galaxy-s5-review/
Click to expand...
Click to collapse
Not true.
MHL works through the standard microUSB portion of the plug, just like it does on many other devices. The additional thinner side is to accommodate the changes for USB 3.0. The Note 3 was the first phone to use a USB 3.0 cable and have a USB 3.0 Micro-B port on the device, and Samsung is following suit with the S5. Samsung has been supporting MHL 2.0 since the S4, which only had a standard microUSB port, so there was no need to switch to a new port design just for that. And if you look at the MHL adapter you mentioned, it has a standard microUSB plug. The HTC One, HTC One Max, and HTC One (M8) (among other devices) also have MHL 2.0, and do so through a standard microUSB port. The extended port on the S5 (and Note 3) is for USB 3.0. It's not there for MHL.
And the Engadget review that you linked doesn't support your post, rather it just notes that the port supports MHL (which it supports it through the standard microUSB portion of the port).

Interesting. I got my $12 adapter in today and sure nuff, it is usb port only. Thanks, now I find this out I think that is stupid of Samsung to put the USB 3.0 extension as another port. Not that I use it that often....

rwideman said:
Interesting. I got my $12 adapter in today and sure nuff, it is usb port only. Thanks, now I find this out I think that is stupid of Samsung to put the USB 3.0 extension as another port. Not that I use it that often....
Click to expand...
Click to collapse
There was no other way for them to add USB 3.0 functionality to the device while allowing backwards compatibility with microUSB 2.0. They wanted everyone to have the option of still being able to use their old microUSB 2.0 cables along with a different USB 3.0. I think it was definitely the right move instead of introducing a completely new plug that's not backwards compatible.
That said, a new USB 3.0 plug is coming that's not backwards compatible with USB 2.0 microUSB cables. It's been recently approved, but I'm not sure when we'll start seeing it on the devices.

rwideman said:
You are half correct.... The right side is the micro usb port the left side is MHL 2.0, another version of HDMI out. You need a $13 adapter for this to work. Why Samsung put both on the same cable beats me.
Reference:
http://www.engadget.com/2014/04/11/samsung-galaxy-s5-review/
Click to expand...
Click to collapse
Where can i buy the $13 adapter?

http://www.amazon.com/gp/product/B00ESM3Q7K/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1

Check out the USB plug. See the blue plastic insert? Denotes SS super drives. Huge transfer speeds
Follow Me @Bash_array