Database Users

[RECOVERY][PORT][CTRv3/v3.3][CWM*Tv1.0] CARLIV TOUCH RECOVERY FOR WIKO RAINBOW

DISCLAIMER:
Rooting your phone and using custom Recoveries and ROM's have risks and may result in bricking your device, and has nothing to do with Google or the device manufacturers. In case of any mishap I am not responsible if you brick/ruin your phone in any way.
Basic computer skills are required and minimal knowledge about the phone and phone utilities also.
Make sure that whatever you do, you are doing it at your own responsibility.
NOTE: I Moved This Thread Here Because I Realized That In The Past Location of This Thread Is Not An Approapriate Place To Discuss This.
REMINDER!!!
THIS THREAD IS INTENDED TO WIKO RAINBOW USERS ONLY!!!
FOR THOSE WHO ARE NOT WIKO RAINBOW USERS, DO NOT TRY FLASHING THIS RECOVERY TO YOUR PHONE BECAUSE IT WASN'T MEANT FOR YOUR DEVICE!!!
IF YOU WANT TO PORT THIS RECOVERY TO YOUR DEVICE GO
->HERE - @carliv's main thread for ctr recovery
->HERE - @carliv's porting guide
Don't forget to give thanks to him!
It is a CWM based recovery and is compatible with any other CWM based recovery. It works with KITKAT kernels. In this version I used Napstar-xda's full touch module as base. The navigation it is posible by touching the menu item. In long display menu (as choose zip from sdcard) for scroll page down Swipe Right and for scroll page up Swipe Left. For Go Back also Swipe Left.
If the Swipe doesn't work (usually if your phone is multitouch but has only 2 points of touch), use bottom virtual navigation keys or volume buttons Down for Scroll down, Up for Scroll up, and the back button for Go Back.
Version 3.3 update (21-apr-2015):
This is the last batch of builds for porting. I won't do that anymore.
- many fixes in code;
- cleaned up the source code;
- reset battery stats option;
- wipe all - preflash option;
- removed nvram backup/restore because it can corrupt the bootloader;
-full track of changes here.
Click to expand...
Click to collapse
INSTRUCTON FOR INSTALLING IT!
OPTION 1:
Use MobileuncleTool or Rasher (Both of them can be downloaded at Google Play Store so do not bother asking for the link of this two apk's)
In MobileUncleTool:
1. Rename the "CTR_Recovery_v3.3_wiko_rainbow.img" into "recovery.img".
2. Put recovery.img in the root of your sdcard (/sdcard/recovery.img).
3. In the tool just go to recovery update then you wil automatically see the recovery.img then flash it and wait until it finished.
4. Reboot to recovery.
In Rasher:
1. Its ok if it is not renamed or in the sdcard root, just simply select recovery then locate the recovery image file and flash it.
2. Reboot to recovery.
OPTION 2:
Via SmartPhoneFlashTool(SPFT)
1. Locate MT6582_Android_scatter.txt
2. Only Tick the RECOVERY then locate the recovery image.
3. Press Download and wait till flashing finished.
4. Reboot to recovery.
SELECT VERSION OF CTR YOU WANT TO FLASH:
1. CTR RECOVERY V3
2. CTR RECOVERY V3.3
3. Carliv CWM*T Recovery v1.0 (On-going still asking permission to @carliv for porting it but as of now I was able to boot into it but the only problem is the sdcard0 path are not mounted and also the Advance Menu are not working)
To get aroma file manager to work you need to flash the zip below. -> HERE
Credits to:
-Sir @carliv for the porting guide, tools and to his helpful threads.
-Also @Kyzrael (ME) for porting this two recovery. The ctr v3 and ctr v3.3
( Hit Thanks to this thread if you find it helpful )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADD ONS: If you used this recovery and you find some problem with it don't hesitate to approach me so that I can pinpoint the problem or reprocess the whole porting process to fix the issues that you may find. Remember, I spent two days just to finish this two ctr to port and make it work to our device.
-Other Clone Phones Related to Wiko Rainbow was also get it working if you flashed Wiko Rainbow v13 firmware.
-Btw, I am using MyPhone Agua Rio and I was able to get it work because I am using Wiko Rainbow v13 firmware.

Lenovo K50-T5 Vibeui 3.1 1614 ST Complete tutorial how to Root and flash Gapps

This is a COMPLETE TUTORIAL How to Root and Flash Gapps on Lenovo K3 Note Official Stock Vibeui 3.1 1614 St Android 6.0
First of all Download all necessary Files :: Mirror 1# Google Drive
Alternative gapps package
Nano gapps package
Once you downloaded the files put them on your External SD card
Now Reboot to Your Custom Recovery(In This guide i use TWRP 3.0.0.3 recovery with Material theme for Example but the same steps are for all others)
Select Install
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Than Navigate to the Folder that you downloaded
Once you are there Simply flash the Three Files in This Order: 1. Flash The K3_NOTE_PATCHED_BOOT_1614 -Dont reboot 2.Go back to the Folder and flash SuperSU-v2.71-Again Dont reboot 3.Again return to the Folder and Flash Gapps Setupwizard fix for vibe 3.1 3.5 and than Reboot
Once you Boot Up Next thing You need to do is to Allow all Permissions Google related:Google playstore,Google play services and Google services framework.
If you found his Tutorial guide useful you can Click the Thanks! button​​USEFUL LINKS
Lenovo K3 Note Index thread by @hackerpower
SP FLASH TOOL Tutorial to install TWRP / Custom Recovery in Lenovo K3 Note by @stone_henge
Complete Tutorial how to flash K50-T5 Android 6.0 Marshmallow via Sp flash Tool by @emptywordsss

Hey man can i take nandroid backup of stock firmware? Im noob ???

Rockstar.garvit said:
Hey man can i take nandroid backup of stock firmware? Im noob ������
Click to expand...
Click to collapse
Of course you can mate Just flash TWRP recovery Follow this Tutorial
After u successfully Install the TWRP go to Recovery Backup/Whatever you want to backup and thats pretty much it

hi, i followed the above steps but the Google Apps all crash when I try to launch them. Any tips?

markmsc said:
hi, i followed the above steps but the Google Apps all crash when I try to launch them. Any tips?
Click to expand...
Click to collapse
Well that's weird...Try to Allow All Google Related permissions if that dont work just try this ALternative Gapps fix package and report your Progress

emptywordsss said:
Well that's weird...Try to Allow All Google Related permissions if that dont work just try this ALternative Gapps fix package and report your Progress
Click to expand...
Click to collapse
Upon boot, clicking "Try To Solve' and then enabling permissions allowed the Setup Wizard to proceed to launcher screen.
Next, going to Play Store and updating "Google Play Services" sorted the rest out.
Thanks! The automatic system update messed up GApps quite badly for me, this helped a lot!

why i cant see , google play service ? its always says stoped , and i cant clear catche since i dont see it in app list

Can someone please share a screenshot of their system/vendor/etc I am looking for some files that I'm missing. Thank you very much!

Blogis said:
why i cant see , google play service ? its always says stoped , and i cant clear catche since i dont see it in app list
Click to expand...
Click to collapse
Try this way: Backup your personal Data first with Titanium or whatever.than after you flash the gapps(btw ou can try the latest Pico package from http://opengapps.org/) and than after he phone boot than reboot to recovery and make a FACTORY RESET only and the next boot all FC will be fixed.

Hello
What about Languages Package ?
I want Arabic Language

Sir I used the above process and successfully updated my device. My device model is LENOVO K50-T5 Build number is VIBEUI_V3.1_1622_5.440.1_ST_K50-T5 . sir I don't have a PC and I can't even root this with king root or any other tools. And Im badly in need of a custom recovery. I don't have a PC so can't install a custom recovery. I don't have root access too. Now what I'm planning is to downgrade my device to lollipop and root it and flash a recovery. To do this please help me. Or please help me with rooting my phone without PC. Or installing a custom Rom. Or a custom recovery.... Please help me... Any help is greatly appreciated. Thank you.

Hi I am from Bangladesh, My device is Lenovo K3 note k50-T5 now explain something if i am going to install Lenovo k50a40 than what happening my device,
actually if possible please tell me about this
i can`t well in English

[RECOVERY][TWRP 3.0.2] for HP TouchPad, by FlintMan

TWRP 3.0.2 for HP TouchPad, by FlintMan
Hello folks! I didn’t see this easily located around here, so I figured I would repost.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mind you, I am not the developer of this. I had found it online on FlintMan’s webpage, and it’s hard as hell to get at without jumping through a lot of hoops online. I have installed and I am using it. So I’ll post it here.
FLINTMAN-TWRP-touch-data_media-SELINUX-f2fs-3.0.2.0-09-06-16.zip [9.1 MB]
https://mega.nz/#!wYNCmbDD!a6rNd_GdfT9LJ6RYhRg83ZIIQGjB3W4xJ3Q5reGV8Ws
I’ve attached a few screenshots.
Note that if you are flashing from within a slightly earlier version of TWRP that can flash recoveries, you’ll get a failure error if you try to verify the signature. There is no zip signature in this. If you turn off zip signature verification, it's fine.
I haven’t seen any problems. I’ve flashed several ROMs with it and everything seems okay.
(Mods: move or sticky this thread if you see fit.)

I currently have moboot and CWM on TP. Can I flash this directly from CWM to replace it?
thanks

tsoheq said:
I currently have moboot and CWM on TP. Can I flash this directly from CWM to replace it?
thanks
Click to expand...
Click to collapse
I would also like to know this. Didn't know if I have moboot and it lists clockworkmod now, if flashing via clockwork would replace it w/ twrp? Or need to do more to get rid of clockworkmod in moboot? Thanks!

ryancell said:
I would also like to know this. Didn't know if I have moboot and it lists clockworkmod now, if flashing via clockwork would replace it w/ twrp? Or need to do more to get rid of clockworkmod in moboot? Thanks!
Click to expand...
Click to collapse
You should be able to flash this ZIP in CWM and your recovery will be overwritten with TWRP.
But, what version of Moboot and CWM are you using...that is important in figuring out the answer.

Moboot: 0.3.8
Recovery is PhilZ Touch 6.44.9 Clockworkmod: v6.0.4.9
Surely recovery is old, think moboots newer...just don't want to goof anything up. Thanks!

ryancell said:
Moboot: 0.3.8
Recovery is PhilZ Touch 6.44.9 Clockworkmod: v6.0.4.9
Surely recovery is old, think moboots newer...just don't want to goof anything up. Thanks!
Click to expand...
Click to collapse
I'd try it anyway. Worse that will likely happen is that the ZIP won't flash.

Flashed it and it replaced clockworkmod in moboot as well. No issues. Thanks! Good to have a new version of a recovery vs the old one. Now to backup and try Nougat rom soon

ryancell said:
Flashed it and it replaced clockworkmod in moboot as well. No issues. Thanks! Good to have a new version of a recovery vs the old one. Now to backup and try Nougat rom soon
Click to expand...
Click to collapse
You are in for a real treat with Nougat!

New Flintmans TWRP 3.0.3.0
Flintman has released a new version of his TWRP recovery 3.0.3.0 available <Mod Edit: Link to outside forum removed.> in his new thread @ Devs Base
7.x Required TWRP recovery
Flintmans TWRP 3.1.0.0(5/09/17)
Flintmans TWRP 3.1.0.0(3/24/17)
Flintmans TWRP 3.0.3.0(1/23/17)
Flintmans TWRP 3.0.2.0(9/11/16)

Hi
I am trying to install Android 7 on my TouchPad (previous Android version has crashed).
Have an issue when trying to use these TWRP recovery with tptoolbox: I always got the message that the .zip file is "unrecognized/unsupported zip".
Any idea how I can workaround this issue?
Thanks a lot
Nicolas

play3000 said:
Hi
I am trying to install Android 7 on my TouchPad (previous Android version has crashed).
Have an issue when trying to use these TWRP recovery with tptoolbox: I always got the message that the .zip file is "unrecognized/unsupported zip".
Any idea how I can workaround this issue?
Thanks a lot
Nicolas
Click to expand...
Click to collapse
TPTB doesn't work with the latest versions. Use this alternate method.

Hi @RolandDeschain79,
I've just been following the changes in TWRP for some of the other devices I own, and noticed we're up to TWRP 3.2.x now for most devices.
Your post below, is a BRILLIANT source of all the latest TWRP builds for our Touchpads. I was wondering, do you know if Flintman is still updating and knocking out new TWRPS for our device? To add and bring Android 8.x+ base for our recovery??
Cheers, Lister
RolandDeschain79 said:
Flintman has released a new version of his TWRP recovery 3.0.3.0 available <Mod Edit: Link to outside forum removed.> in his new thread @ Devs Base
7.x Required TWRP recovery
Flintmans TWRP 3.1.0.0(5/09/17)
Flintmans TWRP 3.1.0.0(3/24/17)
Flintmans TWRP 3.0.3.0(1/23/17)
Flintmans TWRP 3.0.2.0(9/11/16)
Click to expand...
Click to collapse

https://dirtyunicorns.com/forum/tenderloin/

[RECOVERY] TWRP 3.x for Cube Talk 9X(U65GT)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 3.x
for Cube Talk 9X (U65GT)​
Disclaimer
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this
* recovery before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Always backup your device before flashing any rom/recovery/whatever
*/
​
Introduction
TWRP 3 built from Omnirom 5.1 sources
+ Omnirom 6.0 sources (TWRP 3.0.2)
+ Omnirom 7.1 (TWRP 3.0.3 and 3.1.x)
+ Omnirom 8.0 (TWRP 3.2.1)
+ Omnirom 8.1 (TWRP 3.2.3)
+ Omnirom 9.0 (TWRP 3.3.1)
+ Omnirom 9.0 (TWRP 3.4.0, 3.5.2)
Prebuilt stock kernel
Features
TWRP functions (flash zip, flash img, backup, restore...)
USB OTG, Internal and external SD cards
NTFS support
Know issues
graphics performance is not optimal (swipe gesture is a little slow)
touchscreen response is bad when plugged to AC
?
Changelog
Because of recovery partition size, these features are disabled :
SD Card partitioning
NTFS-3G
screnshots
logcat
Because of these regressions, 3.4.0 is still to be prefered
3.6.0 (2021/12/05) :
Updated TWRP sources from Teamwin 9.0 branch (2021/12/05)
3.5.2 (2021/04/24) :
Updated TWRP sources from Teamwin 9.0 branch (2021/04/20)
Allows flashing Magisk apk
3.4.0 (2020/08/11) :
Updated TWRP sources from Teamwin 9.0 branch (2020/07/30)
Allows flashing Magisk zip
Older versions
3.3.1 (2019/07/07) : updated TWRP sources from Omnirom 90 branch
3.2.3 (2018/08/12) : updated TWRP sources from Omnirom 8.1 branch (2018/08/09)
v0.97 : updated TWRP 3.2.1 sources from Omnirom 8.0 branch (2017/12/08)
v0.68 : updated TWRP 3.1.1 sources from Omnirom 7.1 branch (2017/05/20). Wipes should be faster
v0.25 : updated omnirom sources (2016/06/19). sd-ext is not "storage" anymore
v0.24 : initial TWRP 3.0.2 release - removed
Downloads
latest file from androidfilehost
Installation instructions
3 ways to install this recovery
Using SP Flash Tool
Prerequisites
Install MTK USB Drivers (windows xp/vista/7 - Windows 8/8.1/10 - other windows 10)
SP Flash Tool (howto)
In SP Flash Tool, always use "Download Only" mode when not explicitly asked to do otherwise (you could lose your IMEI/WIFI/BT) or if you don't know what you are doing.
Please do NOT ask about any problem with USB drivers or SP Flash Tool here in this thread, this is not the right place for it as these problems are not related to THIS particular recovery but to YOUR computer setup. There are other threads and/or sites about such problems.
Installation
power off the tablet
launch SP Flash Tool, click on "Download" tab
click "scatter-loading" button and choose the downloaded scatter file (MT6592_Android_scatter-recovery_only.txt is based on KK stock rom)
on the "RECOVERY" line, click the empty "Location", and choose the downloaded recovery img file
click "Download"
plug your tablet on USB
Using previous already installed TWRP
reboot to recovery
"Install"
"Install Image"
choose the recovery img to flash
choose "Recovery" partition
"swipe to confirm Flash"
Using an application (root needed)
such as Rashr
Boot to recovery
Turn your tablet off
Push Power button + Volume- + Volume+ buttons
Keep the buttons pushed untils boot logo appears
Thanks to/Credits
TeamWin
Omnirom
How to compile TWRP touch recovery (Dees_Troy)
TWRP Flags for BoardConfig.mk (MSF Jarvis)
Contributors
pix106
Source Code: https://github.com/pix106/android_device_twrp

Reserved

Cool, thanks! Do you have plans for porting lineage os?

6opo9a said:
Cool, thanks! Do you have plans for porting lineage os?
Click to expand...
Click to collapse
Nope, I only built recovery for this tablet.
FYI, there is already a ported CM13 on 4pda

Hello everybody. could someone give the link of the ported CM13 (on 4pda) for our device?

AGBOHOU said:
Hello everybody. could someone give the link of the ported CM13 (on 4pda) for our device?
Click to expand...
Click to collapse
Search 4pda instead of spamming a TWRP thread...

Many thanks for this, pix106.
........
P34c3
.....
...

TWRP 3.2.3 update is available in "Downloads" tab

AGBOHOU said:
Hello everybody. could someone give the link of the ported CM13 (on 4pda) for our device?
Click to expand...
Click to collapse
There are CM13 but also RROS v5.7.4 (both Android 6.0.1), see:
https://www.getdroidtips.com/resurrection-remix-cube-talk-9x/
http://freaktab.com/forum/mtk-based...s-recoverys-mods-etc-list?p=748059#post748059

zgfg said:
There are CM13 but also RROS v5.7.4 (both Android 6.0.1), see:
https://www.getdroidtips.com/resurrection-remix-cube-talk-9x/
http://freaktab.com/forum/mtk-based...s-recoverys-mods-etc-list?p=748059#post748059
Click to expand...
Click to collapse
Guys, this a twrp thread, not a general thread, please behave, or create a general thread if you want general talk.

Thank you very much ¡¡

TWRP 3.3.1 build is up

Thank you

TWRP 3.4.0 build is up

TWRP 3.5.2 build is up

TWRP 3.6.0 build is up

[RECOVERY][3.6.2-12][TOCO][UNOFFICIAL] Stable TWRP - Team Win Recovery Project

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch-driven user interface, with no more volume rocker or power buttons to mash. The GUI is also fully XML-driven and completely theme-able. You can change just about every aspect of the look and feel.
Key Features:​
Touchscreen-driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout and true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
Onscreen keyboard
Easy selection of internal/external storage
In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe, and run a backup.
Source Code:​GitHub: https://github.com/TeamWin/android_bootable_recovery
Gerrit Instance: http://gerrit.twrp.me
Hello, this is TWRP, for Xiaomi Mi Note 10 Lite (toco)​
Touch and ADB work
Sideload
Fastbootd
MTP
USB OTG is working
Decryption IS NOT yet supported for A12
Send me a beer: PayPal​
Kernel source: https://bigota.d.miui.com/V13.0.1.0.SFNMIXM/miui_TOCOGlobal_V13.0.1.0.SFNMIXM_b856dc7481_12.0.zip
Telegram group: https://t.me/ahq254chat
Download​https://bit.ly/3t197EP
Installation​Prerequisites: ADB & Fastboot platform-tools
1. Download the recovery from the link above
2. Boot your device into bootloader mode (Power + Volume Up)
3. Open a command window in the folder containing the downloaded recovery
4. Type the following command and hit Enter
fastboot flash recovery TWRP-3.6.2-12-0530-toco-DennisMurimi.img
Click to expand...
Click to collapse
5. Type this command and hit Enter to boot into recovery
fastboot reboot recovery
Click to expand...
Click to collapse
6. Confirm successful installation when you boot into the new TWRP

Reserved

Download links please . . .

cyned said:
Download links please . . .
Click to expand...
Click to collapse
The link is literally right there in the post. Take your time and read through

AndroidHQ254 said:
The link is literally right there in the post. Take your time and read through
Click to expand...
Click to collapse
At time of post all links reverted to a blog, I don't even remember it. Maybe browser issue, my bad.

cyned said:
At time of post all links reverted to a blog, I don't even remember it. Maybe browser issue, my bad.
Click to expand...
Click to collapse
Could have been a derp

hi, after flashing this update the data became encrypted. i was in twrp 3.5.0 before flashing this.

ZeA_Quin said:
hi, after flashing this update the data became encrypted. i was in twrp 3.5.0 before flashing this.
Click to expand...
Click to collapse
A12 data decrytion is not yet supported. Wait for TWRP team to implement that

Great Work Thank you for keeping this Device up to date almost singlehandedly. Really appreciate the work !

Hi, can you suggest me please a video tutorial? (It has not to be toco, but with the same steps). i tried lots of tutorials and nothing worked. I booted to your twrp, but could not flash it.

Any plans to port TWRP 3.7.0 (Android 12.1 branch)?
This new version finally supports Android 12 decryption.

Chris7375 said:
Great Work Thank you for keeping this Device up to date almost singlehandedly. Really appreciate the work !
Click to expand...
Click to collapse
This is possible because of the users coming in to support the work. So if you can join the supporters team, it will help the work continue even for longer

Gloter125 said:
Hi, can you suggest me please a video tutorial? (It has not to be toco, but with the same steps). i tried lots of tutorials and nothing worked. I booted to your twrp, but could not flash it.
Click to expand...
Click to collapse
A video will come on my youtube channel so ensure that you are subscribed

Hello, is it possible to flash SuperSU with this on MIUI 13.0.2.0 even tough the (de-/)encryption is not supported on A12?

ROOT_Neko said:
Hello, is it possible to flash SuperSU with this on MIUI 13.0.2.0 even tough the (de-/)encryption is not supported on A12?
Click to expand...
Click to collapse
Im sorry but im really nervous since i have bad experiences with the sm-a750fn that also had unofficial TWRP and i just want to root my phone but as far as i noticed i cannot access adb in the stock recovery, thus unable to sideload SuperSU.