Gionee smartphone secrect code - GiONEE Elife E7

These codes is copied from a chinese forum and I had tested all codes. Some work but some not work. Sorry about my English.
Working code
"* # 8702 #" - Phone hardware testing (with Chinese language. Can anyone translate them??)
"* # 837500 #" - detect mobile version number, date, and phone system
"* # 7552 #" - to check whether the phone is ROOT
"* # * # 4636 # * # *" - check the phone information and battery information
* # * # 8255 # * # * Start GTalk Service Monitor display phone software version
* # 06 # phone original factory serial number (International Mobile Identity)
Not work on my phone
* # * # 34971539 # * # * Display Camera Camera firmware version or update the camera firmware
* # * # 7594 # * # * When long press the shutdown button, there will be a window to switch phone models, including: silent mode , flight mode and shut down, you can use the above code directly into the off button.
* # * # 273283 * 255 * 663282 * # * # * to open a place you can make backup media files, such as photos, sounds and videos
* # * # * # * # 197328640 start the service mode, you can test the phone part of the set and change the setting WLAN, GPS and Bluetooth Test code
* # * # 232338 # * # * Display WiFi MAC address
* # * # 1472365 # * # * GPS test
* # * # 1575 # * # * Other GPS test
* # * # 232331 # * # * Bluetooth test
* # * # 232337 # * # Display the Bluetooth device address
* # * # 0 * # * # * LCD test
* # * # 0842 # * # * device testing, such as vibration, brightness
* # * # 2663 # * # * Touch screen version
* # * # 2664 # * # * Touch screen test
* # * # 0588 # * # * proximity sensor test
* # * # 3264 # * # * memory version
Have fun all.

Gionee secrets
Hello,
Thanks for these codes, I am trying to disable H/H+ switch on my Gionee Dream D1. I have a lot of connection drops.
The chinese menu is:
- automatic test
- hardware test
- test report
- restore factory settings
------------------------------- exit
You can use Google Image Translate to further translate this, but you need another phone obviously.
I am trying to find the 3G settings, can someone tell me where to look?
Is there another code for the "real" hidden service menu?
Cheers.
UPDATE:
Haven't found anything useful in this chinese menu, only hardware-specific tests (lcd, sensors, wifi), no settings for 3G or network/broadband selection.

How to root my gionee s plus

Meid invelid code

Thanks for secret codes man! I must appreciate it. They work too!

Related

GSM to SD Backup

before upgrading I'll backup the original radio stack. I had used following Hardware, Software and Procedure
Serial Cable Sub9 to Qtek 1010
Tera Term V 2.3 ( 115200/8/n/1)
Flowcontrol serial Port: Hardware, Xon/Xoff tested
same results -1 hour an nothing happens - no finished Backup
Enter Bootloader ...
SDBackup ....
GSM to SD
Output from Tera Term:
******************************************************
InitDebugSerial using SERIAL PORT 2
******************************************************
HTC Bootloader for [Wallaby] Version:5.15
Copyright (c) 1998-2001 High Tech Computer Corporation
Built at: Jun 6 2002 20:29:17
CPU speed = 206 MHz
DRAM speed = 103 MHz
Hardware platform = 2; (0VT, 1re-PV, 2V, 3anasonic LCD, 4:Reserved)
Get resp timeout err, status is 42
Receive Response error, cmd = 41, arg = FFC000
comd1 No Response
Block size = 512 BYTES
Total blocks in Card: 243328 = 121664k bytes
No legal identify flag in SD Card
Wait for turn on GSM...
GSM Turn on time = 1780 ms
FW 0:10:22>HTC UTILITIES PROGRAM FOR WALLABY
Save GSM ROM to SD
Get resp timeout err, status is 42
Receive Response error, cmd = 41, arg = FFC000
comd1 No Response
GSM flash backup start...
Got request time out!!
.
.
.Got request time out!!
******************************************************
who has an idea where the error could be
CE Backup works
The same setting in Tera Term are used by backup CE to SD with following output:
*****************************************************
InitDebugSerial using SERIAL PORT 2
******************************************************
HTC Bootloader for [Wallaby] Version:5.15
Copyright (c) 1998-2001 High Tech Computer Corporation
Built at: Jun 6 2002 20:29:17
CPU speed = 206 MHz
DRAM speed = 103 MHz
Hardware platform = 2; (0VT, 1re-PV, 2V, 3anasonic LCD, 4:Reserved)
Get resp timeout err, status is 42
Receive Response error, cmd = 41, arg = FFC000
comd1 No Response
Block size = 512 BYTES
Total blocks in Card: 243328 = 121664k bytes
No legal identify flag in SD Card
Wait for turn on GSM...
GSM Turn on time = 1780 ms
FW 0:10:22>HTC UTILITIES PROGRAM FOR WALLABY
CE ROM image backup to SD
Get resp timeout err, status is 42
Receive Response error, cmd = 41, arg = FFC000
comd1 No Response
Block size = 512 BYTES
Total blocks in Card: 243328 = 121664k bytes
ImageStartAddress = A0040000
ImageEnd = A2000000
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * END
CheckSum = 0xD4DE987E
Store image to CF card successful
Unless you need to upgrade your radio stack or have problems with it, I would leave it alone.
Radio Version T313
My Prob is that GPRS Connection on other Devices (Samsung, Ericsson, Nokia) work more stable (every GPRS Connection is successful and faster as on the Qtek 1010).
The Radio Upgrade from t-mobile and O2 should increase the Speed up to 33%.
I can't find anywhere on the net my Radio Version T313 nor a Documentation about it.
I'll also will test MMS and other new features.
GSM backup to SD
I have the same problem what you. I it can not make backup original radio stack. Did this be successful Ci to make ? Maybe different way on spare? I look for such RSU T313 or RSU 3.19

Problem: Logcat Eclipse

Hello guys, please help me? I'm trying to use the logcat in eclipse, but it occurs the error:
Unable to open log device '/ dev / log / main': No such file or directory
I have a Galaxy S i9000 with custom ROM: GINGERBREAD.CHRISTHIANC.V6-JVQ.
I've done some procedures, but got nothing:
- The files / etc/init.d/S01Logger there!
- Type in the phone number * # * # 2846579 # * # * but did not fix!
What to do?
kyointruder said:
Hello guys, please help me? I'm trying to use the logcat in eclipse, but it occurs the error:
Unable to open log device '/ dev / log / main': No such file or directory
I have a Galaxy S i9000 with custom ROM: GINGERBREAD.CHRISTHIANC.V6-JVQ.
I've done some procedures, but got nothing:
- The files / etc/init.d/S01Logger there!
- Type in the phone number * # * # 2846579 # * # * but did not fix!
What to do?
Click to expand...
Click to collapse
Somebody?http://forum.xda-developers.com/images/smilies/confused.gif

[WIP]AOSP GB (compiling)

Hi to all
I'm trying to compile AOSP GB but always fail, the first "error" was this
Code:
build/core/base_rules.mk:78: *** Module name: gps.es209ra
build/core/base_rules.mk:79: *** Makefile location: hardware/qcom/gps/loc_api/libloc_api
build/core/base_rules.mk:80: *
build/core/base_rules.mk:81: * Each module must use a LOCAL_MODULE_TAGS in its
build/core/base_rules.mk:82: * Android.mk. Possible tags declared by a module:
build/core/base_rules.mk:83: *
build/core/base_rules.mk:84: * optional, debug, eng, tests, samples
build/core/base_rules.mk:85: *
build/core/base_rules.mk:86: * If the module is expected to be in all builds
build/core/base_rules.mk:87: * of a product, then it should use the
build/core/base_rules.mk:88: * "optional" tag:
build/core/base_rules.mk:89: *
build/core/base_rules.mk:90: * Add "LOCAL_MODULE_TAGS := optional" in the
build/core/base_rules.mk:91: * Android.mk for the affected module, and add
build/core/base_rules.mk:92: * the LOCAL_MODULE value for that component
build/core/base_rules.mk:93: * into the PRODUCT_PACKAGES section of product
build/core/base_rules.mk:94: * makefile(s) where it's necessary, if
build/core/base_rules.mk:95: * appropriate.
build/core/base_rules.mk:96: *
build/core/base_rules.mk:97: * If the component should be in EVERY build of ALL
build/core/base_rules.mk:98: * products, then add its LOCAL_MODULE value to the
build/core/base_rules.mk:99: * PRODUCT_PACKAGES section of
build/core/base_rules.mk:100: * build/target/product/core.mk
build/core/base_rules.mk:101: *
build/core/base_rules.mk:102: *** user tag detected on new module - user tags are only supported on legacy modules. Alto.
This is fixed but now I get this:
Code:
build/core/base_rules.mk:162: *** device/semc/es209ra/hciattach: MODULE.TARGET.EXECUTABLES.hciattach already defined by external/bluetooth/bluez/tools. Alto.
and idk how to fix it.
If anyone know how to do please help me.

Lenovo A6000 IMEI REPAIR

please help me to recover my IMEI Lenovo A6000 I try all solutions found on google but nothing more walking * # * # 8899 # * # * or # 8899 #### gave nothing; please please please
Nanix86 said:
please help me to recover my IMEI Lenovo A6000 I try all solutions found on google but nothing more walking * # * # 8899 # * # * or # 8899 #### gave nothing; please please please
Click to expand...
Click to collapse
Go through this thread
http://forum.xda-developers.com/lenovo-a6000/help/hellllllllp-please-imei-unknown-null-t3296735

j320f test menu *#0*#

Hello! Installed the custom firmware LineageOS 14.1 (Android 7.1.2). How to enter the test menu in it * # 0 * # ?? or how to add? For example * # 06 # works, but diagnostics * # 0 * # does not work. Thank you!

Categories

Resources