[Q] How do I unbrick my galaxy s4??? - Galaxy S 4 Q&A, Help & Troubleshooting

Ok. So here's what happened. I wanted to root my verizon galaxy s4 and put stock kitkat on it. It was on 4.3. So I rooted it. No problem. Then I tried to put on CWM so I could flash AOPK. But, once I put CWM on, I could not get it into recovery mode. It said that unauthorized software was on my device, not approved by verizon. The only way I could turn on the phone was to put it into download mode and then hit cancel. I wanted to unroot the phone at that point and try again. Also with downgrading it. So I downloaded ODIN and tried to restore my phone to samsung stock 4.2.2. So I tried it, it worked for a while and then ODIN said that it failed. Then when I turned on my phone, it gave me a message saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." So I opened Kies, connected the phone, and tried to do emergency recovery, but it did't recognize my device. So I selected firmware upgrade and instilation. It downloaded and everything but it said "this devices version cannot be updated." So now I have no idea what to do. I can only go into download mode now. Please help me! What should I do?

sounut said:
Ok. So here's what happened. I wanted to root my verizon galaxy s4 and put stock kitkat on it. It was on 4.3. So I rooted it. No problem. Then I tried to put on CWM so I could flash AOPK. But, once I put CWM on, I could not get it into recovery mode. It said that unauthorized software was on my device, not approved by verizon. The only way I could turn on the phone was to put it into download mode and then hit cancel. I wanted to unroot the phone at that point and try again. Also with downgrading it. So I downloaded ODIN and tried to restore my phone to samsung stock 4.2.2. So I tried it, it worked for a while and then ODIN said that it failed. Then when I turned on my phone, it gave me a message saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." So I opened Kies, connected the phone, and tried to do emergency recovery, but it did't recognize my device. So I selected firmware upgrade and instilation. It downloaded and everything but it said "this devices version cannot be updated." So now I have no idea what to do. I can only go into download mode now. Please help me! What should I do?
Click to expand...
Click to collapse
Ask your questions here...
http://forum.xda-developers.com/galaxy-s4-verizon?nocache=1&z=1407835153226421
It's a forum specificaly for the Verizon S4. You will find alot more users who have intimate knowledge of your device to assist you there.

sounut said:
Ok. So here's what happened. I wanted to root my verizon galaxy s4 and put stock kitkat on it. It was on 4.3. So I rooted it. No problem. Then I tried to put on CWM so I could flash AOPK. But, once I put CWM on, I could not get it into recovery mode. It said that unauthorized software was on my device, not approved by verizon. The only way I could turn on the phone was to put it into download mode and then hit cancel. I wanted to unroot the phone at that point and try again. Also with downgrading it. So I downloaded ODIN and tried to restore my phone to samsung stock 4.2.2. So I tried it, it worked for a while and then ODIN said that it failed. Then when I turned on my phone, it gave me a message saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." So I opened Kies, connected the phone, and tried to do emergency recovery, but it did't recognize my device. So I selected firmware upgrade and instilation. It downloaded and everything but it said "this devices version cannot be updated." So now I have no idea what to do. I can only go into download mode now. Please help me! What should I do?
Click to expand...
Click to collapse
Not an easy one this one, but can be solved.
First step: get the right firmware from SamMobile. (phone/operator/country).
Uninstall Kies (and USB drivers).
Reinstall Kies.
Obviously, phone removed all the time form PC!
Shut down the phone (it should be fully charged before, using the normal power adaptor).
Get phone to download mode. Still not connected
Connect phone and wait for the drivers to install.
Start Odin and flash the right firmware (watch for the blue button in Odin, it means the phone is connected OK).
IF it does not work, try another USB port (maybe even a different computer).
If it does not work the first time, in spite off all the above steps successful, don't despair. Shut down the phone (keep pressing power button) and restart in download mode. Repeat Odin procedure.

Related

[Q] AT&T Galaxy S4 will not boot into recovery! Help!

I attempted to flash a new modem into the Omega 7 ROM through Mobile Odin so that I could get working mobile data.
The flash was successful, and the phone rebooted.
However, upon rebooting I was welcomed with the "System software not authorized by AT&T has been found on your phone."
ODIN will not work. The process to reflash fails at "apnhlos" mark. I have no idea what this means.
Can anyone PLEASE help me?
UPDATE: Problem has been fixed. I was able to reboot into Download Mode, plug in to Kies on my PC, and reinstall the official AT&T update. This did unroot my phone, but putting it all back was not a problem.
My advice to those using locked bootloader phones (AT&T and Verizon) is to make sure a project can actually be done on your phone.
MaliciousBanjo said:
I attempted to flash a new modem into the Omega 7 ROM through Mobile Odin so that I could get working mobile data.
The flash was successful, and the phone rebooted.
However, upon rebooting I was welcomed with the "System software not authorized by AT&T has been found on your phone."
ODIN will not work. The process to reflash fails at "apnhlos" mark. I have no idea what this means.
Can anyone PLEASE help me?
Click to expand...
Click to collapse
My unrooted s4 phone gets stuck with the blue colour legend Recovery booting. I am unable to enter safe mode, any ideas? been surfing google for 12hrs with no proper answer. Thanks!!
JMS23 said:
My unrooted s4 phone gets stuck with the blue colour legend Recovery booting. I am unable to enter safe mode, any ideas? been surfing google for 12hrs with no proper answer. Thanks!!
Click to expand...
Click to collapse
Download Kies for your PC, boot into download mode, and reinstall the Official Firmware. It'll unroot your phone and set you back to ground zero, but the phone will safely boot and you can restart from there.

GS4 Softbrick only boots into odin mode help!

Hello guys i was trying out the new Kangabean 4.3. ROM for my AT&T and after flashing it in TWRP it appears I has softbricked my device. I can only boot into download (odin) mode and it stays on "downloading now".. Anyhow i cannot boot into recovery it just vibrates to confirm my input and just revibrates and revibrates... Looked all over for guides and tried to return it to factory settings on Kies but it does not detect my phone... Any help would be great i need this phone for work everyday!!!
Karbooo said:
Hello guys i was trying out the new Kangabean 4.3. ROM for my AT&T and after flashing it in TWRP it appears I has softbricked my device. I can only boot into download (odin) mode and it stays on "downloading now".. Anyhow i cannot boot into recovery it just vibrates to confirm my input and just revibrates and revibrates... Looked all over for guides and tried to return it to factory settings on Kies but it does not detect my phone... Any help would be great i need this phone for work everyday!!!
Click to expand...
Click to collapse
Please search for similar threads. This same issue is being posted over and over and over again. When you were making this post, what "similar threads" or "similar topics" showed up? Did you check them for a solution?
yes sorry i looked at all of them and they all involved well just flashing the stock rom but i cant get my computer to see my gs4 on download mode...i got the drivers and odin installed.
Well, this thread has a couple of ideas...
http://forum.xda-developers.com/showthread.php?t=2405991
or maybe here...
http://forum.xda-developers.com/showthread.php?t=2405127
You might also want to look at the TWRP thread in the development section.
Try again to get into recovery, the key sequence can be tricky, make sure you are doing it just right. "Doing it just right" has been discussed many times.
Also, look at this thread, maybe it will help...
http://forum.xda-developers.com/showthread.php?t=2398336
Yea, I realize that thread is about MF3, but it still has ideas that might help you.
There are also a ton of threads about how to get your PC to recognize ODIN.....search.......good luck.
yeah ive been at it for hours man those links can all access the recovery i cant... i tried everything got the drivers up tried all the odins and its just stuck on "downloading do not turn off target" and my pc doesnt see it...
Odin finally recognized it on the pc in download mode and i was able to flash the stock rom but it seems it wasnts successful...it still just vibrates and vibrates when i press the power...
Try flashing the open recovery.
Sent from a jedi extacy note II
If you mean the CWM recovery I tried it on Odin and it failed.... :""(
Sent from my Nexus 7 using xda premium
Take battery out, back in, power+volumedown, download mode, Install Samsung Kies, do Kies update, connect to PC, Tools-> firmware initialization, take battery out and type model/serial Number, wait patiently until it finishes.
Try different USB port or different PC. Use stock USB cable comes with original box.
If Kies screen get stuck at model number section, you did flash MF3 triangle thingy -> unsolveable brick. Have to go thorugh warranty replacement.
Sent from my SGH-I337 using Tapatalk 4
the Kies Emergency firmware utility worked it put my phone like the day i bought it...also rooted it successfully and installed TWRP on it thanks guys

HELP: I bricked my Note 3 (N900). Forget to enable USB debugging before flashing!

I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.
boycam said:
I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.
Click to expand...
Click to collapse
make sure kies is not running then try odin again
jaythenut said:
make sure kies is not running then try odin again
Click to expand...
Click to collapse
I tried many time already, but still fail. I think because the usb debugging mode was not enable at the first place.
Thank anyway.
boycam said:
I tried many time already, but still fail. I think because the usb debugging mode was not enable at the first place.
Thank anyway.
Click to expand...
Click to collapse
Usb debugging has nothing to do with it failing when you're using odin. Try a different version of odin.
A simple reflash via Odin 1.85 or 3.07/3.04 will fix it.
boycam said:
I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.
Click to expand...
Click to collapse
USB Debugging has nothing to do with odin flash, make sure while flashing below steps.
1. Update boot loader is selected in odin.(Edit:for single file not required)
2. Disable antivirus.
3. make sure note 3 drivers are installed.
4. kies not running in bag round.
5.Clear Factory Data & Catch before flash.
if all of those step fail..
try to flash ur rom on other computer or laptop
Sent from my SM-N900 using XDA Premium 4 mobile app
radicalisto said:
A simple reflash via Odin 1.85 or 3.07/3.04 will fix it.
Click to expand...
Click to collapse
Thankx man itis worked:good::good:
jdomadia said:
USB Debugging has nothing to do with odin flash, make sure while flashing below steps.
1. Update boot loader is selected in odin.(Edit:for single file not required)
2. Disable antivirus.
3. make sure note 3 drivers are installed.
4. kies not running in bag round.
5.Clear Factory Data & Catch before flash.
Click to expand...
Click to collapse
tried flashin with diff odin versions, was not working, tried ver 1.85, cause it lets you select update boot loader.......and BAM,,it worked on my tmobile tab 4, now i c.an wipe the tears off the key board, thanks, didnt do # 5 tho, was rooting the tab with cf auto.
markap99 said:
tried flashin with diff odin versions, was not working, tried ver 1.85, cause it lets you select update boot loader.......and BAM,,it worked on my tmobile tab 4, now i c.an wipe the tears off the key board, thanks, didnt do # 5 tho, was rooting the tab with cf auto.
Click to expand...
Click to collapse
You've indeed saved my day... I've been searching high and low, installing various versions of Odin3, downloading tonnes of tar, tarmd5, zip, etc.!
Pardon me for my ignorance, but I never intended to root my cell phone in the first place. I was merely following what Kies suggested, "A New Firmware, Wanna Upgrade?" Oh, truly? Gee, thanks! And **** it, it screwed up my GT-N7000, saying "Firmware upgrade encountered an issue..." and my cell phone never saw the daylight again, regardless how I started it, factory-reset mode wasn't possible at all, only download mode could be started up. Tried with various methods of Odin3 on multiple ROMS, to no avail, until I read your short reply. BAM! (As you put it...)
Thanks a bunch, mate!
I have a similar issue with my sm n900. Lost my imei and baseband, i needed to flash a custom rom to get my baseband before working on the imei, after flashing via odin phone boots to samsung logo then goes blank. And recovery says E failed to mount efs . But i need to use adb on my pc. So how can i possibly enabe usb debugging in order for adb to find my device?
Flashing a stock ROM from sammobile.com via Odin does not require USB debugging. Flashing a stock ROM will flash everything, including modem, bootloader, and recovery.
My N900 Bricked
I am unable to Go to download mode not even the charging symbol too
no Luck at all phone is not starting need a Unbrick or help me how to get it sorted
galaxy Note 3 Sm N900
Tried to open the phone to short the wire but the shorting mentioned in all the imagees doesnt match the design of the phone internal
can some one tell me which points to short to start the phoen in Ext sd mode
or any help would help

[Q] GS5 Failed to Root Using Odin & Stuck

I attempted to root my phone using Chainfire's method. Evidently, before I started I failed to check for two things, one to make sure usb debugging was properly set. The second thing that I failed to do was insure that I unchecked block reactivation in security options. Now I can't do anything with the phone. It will go into the flash rom mode (down vol. home and power). When I run Odin I get a message saying that the process failed (using cf-autoroot). Then if I try to reboot my phone with the power button, or with (vol.up, home and power) I get a message stating "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Of course the phone won't connect to Kies. I am hoping this doesn't mean I have bricked my phone!
Can anyone offer a suggestion please? I am desperate.
Thanks for any and all help!!
Ignoring instructions can have consequences. You've probably got some messed system files now. But you can recover with Odin.
Backup your photos and anything else of importance. Then do a factory data reset (in the Settings menu), followed by using Odin to flash the full stock firmware image for your device /carrier.
That will take you back to a stable, stock system. To make rooting easier you would do well to choose a S5 4.4.2 firmware image with a build date before June 3rd.
.

Samsung Galaxy A3 SMA300FU Odin /Bricked? Help

I rooted my mobile which worked perfectly, after the initial reboot after rooting. the mobile will not boot since the battery died tho it just goes to a pink static screen after the logo.
It wont let me boot into recovery but i can still boot into download, however now Odin will not see my mobile and i have tried all the drivers uninstalling and re installing to no avail.
Tried several Pc's and new USB cables!
Bump
bump
Update
So after brute force restarting into download mode several times i was able to get Odin to detect my mobile, however the sm-a310 failed, i then used the old root file which let me back into my phone, but again after 1 restart im back at square one so all is not lost ... its defo soft bricked and i can gain access very rarely but i don't know where to go from here.
Suxers said:
So after brute force restarting into download mode several times i was able to get Odin to detect my mobile, however the sm-a310 failed, i then used the old root file which let me back into my phone, but again after 1 restart im back at square one so all is not lost ... its defo soft bricked and i can gain access very rarely but i don't know where to go from here.
Click to expand...
Click to collapse
You`ve to flash the Stock firmware through Odin, then do a Factory Reset.
After successful booting , then you try to root it again.
Got to Sammobile website and download any unbranded Firmware perfect for your device and flash through Odin in Download Mode.
BTW, how you rooted your device ?
And Make sure to check your device`s Battery level before doing any thing.

Categories

Resources