This is the latest firmware for HTC ONE M7 extracted from official OTA OTA_M7_UL_K44_SENSE60_MR_HTC_Europe_5.11.401.10-4.19.401.11_release_372404wj19h95c0x6oa19n.zip
You need unlocked bootloader and S-OFF
Removed Red Warning Text and flashed successfully on my phone.
This build is for
development purposes only
Do not distribute outside of HTC
without HTC's written permission.
Failure to comply may
lead to legal action.
The zip contain:
- firmware 5.11.401.10
- hboot 1.57.0000
- radio 4T.27.3218.14
Flash only if you have firmware v4.xx (download v4 from here) and hboot 1.56.000 not older or you'll get a bricked phone!!!
Download file and copy to your adb folder:
Download links in post 133
DON'T REBOOT THE PHONE UNTIL YOU GET A SUCCESS MESSAGE
1 - Reboot bootloader
Code:
adb reboot bootloader
2 - Reboot to RUU
Code:
fastboot oem rebootRUU
3 - Flash firmware
Code:
fastboot flash zip firmware_name.zip
Very important!!! One more time (press up arrow on your PC keyboard then press ENTER)
Code:
fastboot flash zip firmware_name.zip
4 - Reboot to bootloader and verify version
Code:
fastboot reboot-bootloader
5 - Reboot to system
Code:
fastboot reboot
6 - Enjoy
WARNING
Flash at your own risk, I can't be held responsible if you didn't follow all steps and brick the phone!!!
Stock unmodified firmware
MD5 3b7b13b52f75ed516c888b827710f29a
Zip contain stock kernel and recovery!!!
If your phone get bricked because you didn't follow the guide or flashed over a v3.xx firmware, go to HTC Unbricking Project thanx @dexter93
Only for M7_UL:
modelid: PN0710000
cidnum: HTC__001
cidnum: HTC__Y13
cidnum: HTC__E11
cidnum: HTC__102
cidnum: HTC__203
cidnum: HTC__405
cidnum: HTC__304
cidnum: HTC__A07
cidnum: HTC__032
cidnum: HTC__J15
cidnum: HTC__016
TeHashX said:
If case you need original firmware for:
modelid: PN0711000
modelid: PN0713000
modelid: PN0712000
modelid: PN0714000
modelid: PN0710000
modelid: PN071****
cidnum: HTC__***
cidnum: CWS__001
cidnum: H3G__***
cidnum: O2___***
cidnum: ORANG***
cidnum: TELNZ001
cidnum: OPTUS001
cidnum: T-MOB***
cidnum: TELST001
cidnum: VODAP***
cidnum: BM___001
cidnum: BS_US***
cidnum: GLOBA001
cidnum: ROGER001
cidnum: TELUS001
cidnum: TIM__***
The zip contain:
- firmware 5.11.1540.9
- hboot 1.57.0000
- radio 4T.27.3218.14
- the new splash screen "powered by android"
- stock boot
- stock recovery
http://goo.gl/V3yzDF
MD5 ef0cc76134c170e4230804ca1c9edf02
Click to expand...
Click to collapse
Dear friend:
Could you tell me if this firmware supports M7_UL with SuperCID????
This is the ORIGINAL format the "SD"???
Thank you very much and excuse my English
Yes, you can flash with super cid and will not format sdcard but always is better to save contents.
Thank you sir, everything went nice here m7ul supercid.
Is it cool to use this firmware on ViperOne 6.2.1? I know its not using the latest base. Shouldn't hurt though, right?
So I'm on AT&T with s-off and super CID. Can I flash this?
DrRyder said:
Is it cool to use this firmware on ViperOne 6.2.1? I know its not using the latest base. Shouldn't hurt though, right?
Click to expand...
Click to collapse
Yes
aceroller said:
So I'm on AT&T with s-off and super CID. Can I flash this?
Click to expand...
Click to collapse
TeHashX said:
Yes
Click to expand...
Click to collapse
Awesome. Thanks. Flashing here in a minute.
THX for firmware :highfive:
all set all done with no problem
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.1540.9
(bootloader) version-misc: PVT SHIP S-OFF
I I flash this firmware and after:
c:\HTC>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.047s]
finished. total time: 0.047s
c:\HTC>fastboot flash zip firmware_5.11.1540.9_noredwarn.
target reported max download size of 1514139648 bytes
sending 'zip' (24706 KB)...
OKAY [ 1.981s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping for pre-update
(bootloader) start image[hboot] flushing...
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
FAILED (remote: 90 hboot pre-update! please flush image a
finished. total time: 3.604s
c:\HTC>fastboot flash zip firmware_5.11.1540.9_noredwarn.
target reported max download size of 1514139648 bytes
sending 'zip' (24706 KB)...
OKAY [ 2.044s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[rpm] unzipping & flushing...
(bootloader) [RUU]UZ,rpm,0
(bootloader) [RUU]UZ,rpm,100
(bootloader) [RUU]WP,rpm,0
(bootloader) [RUU]WP,rpm,100
(bootloader) ...... Successful
(bootloader) start image[sbl1-1] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-1,0
(bootloader) [RUU]UZ,sbl1-1,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-2] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-2,0
(bootloader) [RUU]UZ,sbl1-2,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-3] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-3,0
(bootloader) [RUU]UZ,sbl1-3,100
(bootloader) signature checking...
(bootloader) [RUU]WP,sbl1-3,0
(bootloader) [RUU]WP,sbl1-3,100
(bootloader) ...... Successful
(bootloader) start image[sp1] unzipping & flushing...
(bootloader) [RUU]UZ,sp1,0
(bootloader) [RUU]UZ,sp1,26
(bootloader) [RUU]UZ,sp1,50
(bootloader) [RUU]UZ,sp1,75
(bootloader) [RUU]UZ,sp1,100
(bootloader) [RUU]WP,sp1,0
(bootloader) [RUU]WP,sp1,100
(bootloader) ...... Successful
(bootloader) start image[radio] unzipping & flushing...
(bootloader) [RUU]UZ,radio,0
(bootloader) [RUU]UZ,radio,5
(bootloader) [RUU]UZ,radio,11
(bootloader) [RUU]UZ,radio,17
(bootloader) [RUU]UZ,radio,23
(bootloader) [RUU]UZ,radio,28
(bootloader) [RUU]UZ,radio,34
(bootloader) [RUU]UZ,radio,40
(bootloader) [RUU]UZ,radio,46
(bootloader) [RUU]UZ,radio,52
(bootloader) [RUU]UZ,radio,57
(bootloader) [RUU]UZ,radio,63
(bootloader) [RUU]UZ,radio,69
(bootloader) [RUU]UZ,radio,75
(bootloader) [RUU]UZ,radio,80
(bootloader) [RUU]UZ,radio,86
(bootloader) [RUU]UZ,radio,92
(bootloader) [RUU]UZ,radio,98
(bootloader) [RUU]UZ,radio,100
(bootloader) [RUU]WP,radio,0
(bootloader) [RUU]WP,radio,23
(bootloader) [RUU]WP,radio,46
(bootloader) [RUU]WP,radio,69
(bootloader) [RUU]WP,radio,92
(bootloader) [RUU]WP,radio,100
(bootloader) ...... Successful
(bootloader) start image[rcdata] unzipping & flushing...
(bootloader) [RUU]UZ,rcdata,0
(bootloader) [RUU]UZ,rcdata,42949671
(bootloader) [RUU]WP,rcdata,0
(bootloader) [RUU]WP,rcdata,42949671
(bootloader) ...... Successful
OKAY [ 13.915s]
finished. total time: 15.959s
c:\HTC>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.031s]
finished. total time: 0.031s
After that my phone won't boot up, black screen and nothing more :crying: no red light after plug charger...
working fine here
many thanks :good:
Just finished flashing mine. I think now it's as good as brick. It won't come up after step 4. When connecting the charger - no light. Here is all the output I got:
Code:
C:\adb>adb reboot-bootloader
C:\adb>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.106s]
finished. total time: 0.110s
C:\adb>fastboot flash zip firmware_5.11.1540.9_noredwarn.zip
sending 'zip' (24706 KB)...
OKAY [ 2.082s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping for pre-update check...
(bootloader) start image[hboot] flushing...
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
finished. total time: 4.335s
C:\adb>fastboot flash zip firmware_5.11.1540.9_noredwarn.zip
sending 'zip' (24706 KB)...
OKAY [ 2.078s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[rpm] unzipping & flushing...
(bootloader) [RUU]UZ,rpm,0
(bootloader) [RUU]UZ,rpm,100
(bootloader) [RUU]WP,rpm,0
(bootloader) [RUU]WP,rpm,100
(bootloader) ...... Successful
(bootloader) start image[sbl1-1] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-1,0
(bootloader) [RUU]UZ,sbl1-1,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-2] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-2,0
(bootloader) [RUU]UZ,sbl1-2,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-3] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-3,0
(bootloader) [RUU]UZ,sbl1-3,100
(bootloader) signature checking...
(bootloader) [RUU]WP,sbl1-3,0
(bootloader) [RUU]WP,sbl1-3,100
(bootloader) ...... Successful
(bootloader) start image[sp1] unzipping & flushing...
(bootloader) [RUU]UZ,sp1,0
(bootloader) [RUU]UZ,sp1,26
(bootloader) [RUU]UZ,sp1,50
(bootloader) [RUU]UZ,sp1,75
(bootloader) [RUU]UZ,sp1,100
(bootloader) [RUU]WP,sp1,0
(bootloader) [RUU]WP,sp1,100
(bootloader) ...... Successful
(bootloader) start image[radio] unzipping & flushing...
(bootloader) [RUU]UZ,radio,0
(bootloader) [RUU]UZ,radio,5
(bootloader) [RUU]UZ,radio,11
(bootloader) [RUU]UZ,radio,17
(bootloader) [RUU]UZ,radio,23
(bootloader) [RUU]UZ,radio,28
(bootloader) [RUU]UZ,radio,34
(bootloader) [RUU]UZ,radio,40
(bootloader) [RUU]UZ,radio,46
(bootloader) [RUU]UZ,radio,52
(bootloader) [RUU]UZ,radio,57
(bootloader) [RUU]UZ,radio,63
(bootloader) [RUU]UZ,radio,69
(bootloader) [RUU]UZ,radio,75
(bootloader) [RUU]UZ,radio,80
(bootloader) [RUU]UZ,radio,86
(bootloader) [RUU]UZ,radio,92
(bootloader) [RUU]UZ,radio,98
(bootloader) [RUU]UZ,radio,100
(bootloader) [RUU]WP,radio,0
(bootloader) [RUU]WP,radio,23
(bootloader) [RUU]WP,radio,46
(bootloader) [RUU]WP,radio,69
(bootloader) [RUU]WP,radio,92
(bootloader) [RUU]WP,radio,100
(bootloader) ...... Successful
(bootloader) start image[rcdata] unzipping & flushing...
(bootloader) [RUU]UZ,rcdata,0
(bootloader) [RUU]UZ,rcdata,42949671
(bootloader) [RUU]WP,rcdata,0
(bootloader) [RUU]WP,rcdata,42949671
(bootloader) ...... Successful
OKAY [ 15.458s]
finished. total time: 17.544s
C:\adb>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.106s]
finished. total time: 0.109s
C:\adb>
Any ideas? Of course I had S-OFF...
simaka said:
Just finished flashing mine. I think now it's as good as brick. It won't come up after step 4. When connecting the charger - no light. Here is all the output I got:
Code:
C:\adb>adb reboot-bootloader
C:\adb>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.106s]
finished. total time: 0.110s
C:\adb>fastboot flash zip firmware_5.11.1540.9_noredwarn.zip
sending 'zip' (24706 KB)...
OKAY [ 2.082s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping for pre-update check...
(bootloader) start image[hboot] flushing...
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
finished. total time: 4.335s
C:\adb>fastboot flash zip firmware_5.11.1540.9_noredwarn.zip
sending 'zip' (24706 KB)...
OKAY [ 2.078s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[rpm] unzipping & flushing...
(bootloader) [RUU]UZ,rpm,0
(bootloader) [RUU]UZ,rpm,100
(bootloader) [RUU]WP,rpm,0
(bootloader) [RUU]WP,rpm,100
(bootloader) ...... Successful
(bootloader) start image[sbl1-1] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-1,0
(bootloader) [RUU]UZ,sbl1-1,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-2] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-2,0
(bootloader) [RUU]UZ,sbl1-2,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-3] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-3,0
(bootloader) [RUU]UZ,sbl1-3,100
(bootloader) signature checking...
(bootloader) [RUU]WP,sbl1-3,0
(bootloader) [RUU]WP,sbl1-3,100
(bootloader) ...... Successful
(bootloader) start image[sp1] unzipping & flushing...
(bootloader) [RUU]UZ,sp1,0
(bootloader) [RUU]UZ,sp1,26
(bootloader) [RUU]UZ,sp1,50
(bootloader) [RUU]UZ,sp1,75
(bootloader) [RUU]UZ,sp1,100
(bootloader) [RUU]WP,sp1,0
(bootloader) [RUU]WP,sp1,100
(bootloader) ...... Successful
(bootloader) start image[radio] unzipping & flushing...
(bootloader) [RUU]UZ,radio,0
(bootloader) [RUU]UZ,radio,5
(bootloader) [RUU]UZ,radio,11
(bootloader) [RUU]UZ,radio,17
(bootloader) [RUU]UZ,radio,23
(bootloader) [RUU]UZ,radio,28
(bootloader) [RUU]UZ,radio,34
(bootloader) [RUU]UZ,radio,40
(bootloader) [RUU]UZ,radio,46
(bootloader) [RUU]UZ,radio,52
(bootloader) [RUU]UZ,radio,57
(bootloader) [RUU]UZ,radio,63
(bootloader) [RUU]UZ,radio,69
(bootloader) [RUU]UZ,radio,75
(bootloader) [RUU]UZ,radio,80
(bootloader) [RUU]UZ,radio,86
(bootloader) [RUU]UZ,radio,92
(bootloader) [RUU]UZ,radio,98
(bootloader) [RUU]UZ,radio,100
(bootloader) [RUU]WP,radio,0
(bootloader) [RUU]WP,radio,23
(bootloader) [RUU]WP,radio,46
(bootloader) [RUU]WP,radio,69
(bootloader) [RUU]WP,radio,92
(bootloader) [RUU]WP,radio,100
(bootloader) ...... Successful
(bootloader) start image[rcdata] unzipping & flushing...
(bootloader) [RUU]UZ,rcdata,0
(bootloader) [RUU]UZ,rcdata,42949671
(bootloader) [RUU]WP,rcdata,0
(bootloader) [RUU]WP,rcdata,42949671
(bootloader) ...... Successful
OKAY [ 15.458s]
finished. total time: 17.544s
C:\adb>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.106s]
finished. total time: 0.109s
C:\adb>
Any ideas? Of course I had S-OFF...
Click to expand...
Click to collapse
I have the same i also had S-off and unlocked bootloader.
Now my phone is recognized as QHSUSB_DLOAD on Win7
alien44 said:
I have the same i also had S-off and unlocked bootloader.
Now my phone is recognized as QHSUSB_DLOAD on Win7
Click to expand...
Click to collapse
I think most likely both of us didn't have superCID. I am not sure whether I set it or not after set-off (it was a while ago)... No way to check it now ....
OP, why didn't you specificially input in your thread that superCID is required for this update? It makes sense, of course, but you should have put this there...
My phone is also bricked now damn..
Super CID is definitely NOT required, I successfully flashed this firmware and no super CID
Flashed on International M7, didn't brick.
simaka said:
I think most likely both of us didn't have superCID. I am not sure whether I set it or not after set-off (it was a while ago)... No way to check it now ....
OP, why didn't you specificially input in your thread that superCID is required for this update? It makes sense, of course, but you should have put this there...
Click to expand...
Click to collapse
I had super CID, S-OFF, Unlocker bootloader. What now?
Worked
Worked fine here, I did have Super-CID though....
Related
Greetings,
I have an HTC Mytouch 4G INFO :
Code:
F:\Android Multi Tools v1.02b>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.85.2007
(bootloader) version-baseband: 26.03.02.26_M
(bootloader) version-cpld: None
(bootloader) version-microp: 0429
(bootloader) version-main: 1.17.531.2
(bootloader) serialno: SH24TRM00500
(bootloader) imei: 359176041244372
(bootloader) product: glacier
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD1510000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3767mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: ENG
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 7eafc656
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.031s
which has no partitions and i'm not able to enter recovery only bootloader and fastboot, i tried flashing boot, recovery on fast boot but with no luck as i get this error :
Code:
F:\Android Multi Tools v1.02b>fastboot flash recovery recovery-clockwork-5.0.2.0
-glacier.img
sending 'recovery' (3624 KB)...
OKAY [ 1.219s]
writing 'recovery'...
FAILED (remote: image update error)
finished. total time: 4.156s
Please help me.
Thanks in advance
Please anyone can help me??
You could try this instead http://forum.xda-developers.com/showthread.php?t=1200147 since you already have s-off.
unqualified said:
You could try this instead http://forum.xda-developers.com/showthread.php?t=1200147 since you already have s-off.
Click to expand...
Click to collapse
I can't flash anything i get Faile-PU next to each BOOT, USERDATA...etc please help!
xDiRECT said:
I can't flash anything i get Faile-PU next to each BOOT, USERDATA...etc please help!
Click to expand...
Click to collapse
Did a little searching and found someone with the same error on the Incredible. Unfortunately the outlook doesn't look good
http://forum.xda-developers.com/showthread.php?t=2202759
The good news is that if you want to replace the motherboard, you can sometimes find MyTouch 4g phones with cracked screens or broken digitizers on ebay for under $20 (just did that myself).
i have one xt1575 moto x pure in bricked state fastboot doesn't except any command
following error on fastboot
start up failed
your device didn't start up successfully
use the software repair assistant on computer to repair your device.
connect your device to your computer to get software repair assistant
here is the getvar all info
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8992-A0.1C(*)
(bootloader) product: clark
(bootloader) board: clark
(bootloader) secure: yes
(bootloader) hwrev: 0x83C0
(bootloader) radio: 0x2
(bootloader) emmc: 32GB Samsung REV=07 PRV=02 TYPE=57 PNM=BWBD3R
(bootloader) ram[0]: 3072MB Samsung S8 SDRAM DIE=6Gb M5=x1 M6=x5 M7=x0 M
(bootloader) ram[1]: 8=x3B
(bootloader) cpu: MSM8992
(bootloader) serialno: b3deb886
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0xDEAD
(bootloader) uid: 295D7A001E000000000000000000
(bootloader) unlocked: Not supported
(bootloader) securestate: Not supported
(bootloader) iswarrantyvoid: Not supported
(bootloader) mot_sst: 8
(bootloader) max-download-size: 536870912
(bootloader) reason: Failed to initialize partition table
(bootloader) imei: 000000000000000
(bootloader) meid:
(bootloader) date: 01-01-1970
(bootloader) sku: 000000000000000
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) hyp.git: hyp.git
(bootloader) sdi.git: sdi.git
(bootloader) pmic.git: pmic.git
(bootloader) aboot.git: git=MBM-NG-VA0.1C-0-ge29f91e
(bootloader) qe:
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
all: listed above
finished. total time: 0.047s
Click to expand...
Click to collapse
can anyone help with this issue bootloader was locked and get_unlock_data command also not success
mfastboot oem get_unlock_data
...
(bootloader) Failed to get unlock data, please try again!
FAILED (remote failure)
finished. total time: 0.005s
Click to expand...
Click to collapse
mfastboot oem unlock
...
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
finished. total time: 0.004s
E:\motorola\X_Pure_XT1575_CLARK_RETUS_5.1.1_LPH23.116-18_cid9_subsidy-DEFAULT_CFC.xml>mfastboot oem fb_mode_clear
...
OKAY [ 0.002s]
finished. total time: 0.003s
E:\motorola\X_Pure_XT1575_CLARK_RETUS_5.1.1_LPH23.116-18_cid9_subsidy-DEFAULT_CFC.xml>mfastboot flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (40960 KB)...
OKAY [ 1.434s]
writing 'boot'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 1.452s
E:\motorola\X_Pure_XT1575_CLARK_RETUS_5.1.1_LPH23.116-18_cid9_subsidy-DEFAULT_CFC.xml>mfastboot flash bootlaoder bootloader.img
target max-sparse-size: 256MB
sending 'bootlaoder' (2699 KB)...
OKAY [ 0.135s]
writing 'bootlaoder'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 0.190s
E:\motorola\X_Pure_XT1575_CLARK_RETUS_5.1.1_LPH23.116-18_cid9_subsidy-DEFAULT_CFC.xml>mfastboot flash modem non-hlos.bin
target max-sparse-size: 256MB
sending 'modem' (41675 KB)...
OKAY [ 1.369s]
writing 'modem'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 1.383s
Click to expand...
Click to collapse
device start up failed
What Android version did you have before the trouble occurred? It looks like you are trying to downgrade, which isn't possible with a locked bootloader. When your bootloader is locked you must flash the same or newer Android version, all others will fail.
Thanks For Your Reply.
I returned this phone to customer but I receive one more moto x pure xt1575 with imei 0 issue i tried all modem but still imei 0
I also erased the modemst1 and modemst2 and then flash the correct fsg then still imei 0. In this phone bootloader status is engineering. How to solve this issue?
Shabby The Dev said:
Thanks For Your Reply.
I returned this phone to customer but I receive one more moto x pure xt1575 with imei 0 issue i tried all modem but still imei 0
I also erased the modemst1 and modemst2 and then flash the correct fsg then still imei 0. In this phone bootloader status is engineering. How to solve this issue?
Click to expand...
Click to collapse
Any phone with bootloader status "Engineering" should be returned to Motorola... It is not in a fully unlocked state and it is not intended for normal use (and no, it is not some "special" unlock above a regular bootloader unlock as some people say)
https://forums.lenovo.com/t5/MOTORO...g-and-Unlocked-bootloader-status/td-p/3420219
How to fix this please!!! Impossible to istall rom
This what I got, the version-main has disappeared!!!
Thank you for help
C:\adb> fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.101.111011.20.0123
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: SH4AXWW00591
(bootloader) imei: 11222222222222225
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: a5_ul
(bootloader) platform: hTCBmsm8226
(bootloader) modelid: 0P9C20000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 2a1d6660
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.073s
Starting flash process...
sending 'zip'... (51059 KB) OKAY
writing 'zip'... (bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
Execution time is 3449(ms)
FAILED (status read failed (Too many links))
Checking if phone will restart...
Edit: SOLVED. Flashed 8.1.0 October update before rebooting and everything went fine
First I unlocked the bootloader using this guide.
Then I immediately flashed TWRP using this guide from the TWRP site. After rebooting, I was unable to access "Recovery" in the bootloader as I was shown an error message, "Moto G5 Plus is unlocked and can't be trusted, bad key error", as seen in this post. A user on the post said to flash the stock ROM and then reflash TWRP.
I rebooted into bootloader and flashed the Android 7.1 stock rom. While still in the bootloader, I then realized that I messed up and should've flashed the the 8.1.0 stock ROM as that is what the device initially had. I then download the 8.1.0 ROM from here and flash it in fastboot using this guide.
However, while flashing 8.1.0, the following errors were output (I removed the successful outputs):
HTML:
fastboot oem fb_mode_set
OKAY [ 0.002s]
Finished. Total time: 0.003s
PS C:\Users\subha\Downloads\POTTER_RETAIL_8.1.0_OPS28.85-17_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml> fastboot f
lash partition gpt.bin
Sending 'partition' (45 KB) OKAY [ 0.006s]
Writing 'partition' (bootloader) Validating 'gpt.default.xml'
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote failure)
Finished. Total time: 0.079s
PS C:\Users\subha\Downloads\POTTER_RETAIL_8.1.0_OPS28.85-17_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml> fastboot f
lash boot boot.img
Sending 'boot' (16384 KB) OKAY [ 0.383s]
Writing 'boot' (bootloader) Image signed with key bad key
OKAY [ 0.258s]
Finished. Total time: 0.645s
PS C:\Users\subha\Downloads\POTTER_RETAIL_8.1.0_OPS28.85-17_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml> fastboot f
lash recovery recovery.img
Sending 'recovery' (20580 KB) OKAY [ 0.467s]
Writing 'recovery' (bootloader) Image signed with key bad key
OKAY [ 0.350s]
Finished. Total time: 0.823s
PS C:\Users\subha\Downloads\POTTER_RETAIL_8.1.0_OPS28.85-17_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml> fastboot e
rase customize
Erasing 'customize' (bootloader) Permission denied
FAILED (remote failure)
Finished. Total time: 0.007s
PS C:\Users\subha\Downloads\POTTER_RETAIL_8.1.0_OPS28.85-17_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml> fastboot e
rase clogo
Erasing 'clogo' (bootloader) Permission denied
FAILED (remote failure)
Finished. Total time: 0.120s
I'm still sitting in the bootloader as I'm afraid of rebooting in fear of potentially hardbricking the device. The
HTML:
image_primary gpt
error in particular seems kind of scary - Googling it, it seems people only encountered it when hardbricking the device.
Here is an output of my
HTML:
fastboot gervar all
:
HTML:
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8953-C0.92
(bootloader) product: potter
(bootloader) board: potter
(bootloader) secure: yes
(bootloader) hwrev: P3B
(bootloader) radio: 1
(bootloader) storage-type: emmc
(bootloader) emmc: 64GB SAMSUNG RC14MB RV=08 PV=07 FV=0000000000000007
(bootloader) ram: 4GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=5F
(bootloader) cpu: MSM8953
(bootloader) serialno: removed
(bootloader) cid: 0x0032
(bootloader) channelid: 0x8d
(bootloader) uid: removed
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 534773760
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: removed
(bootloader) meid:
(bootloader) date: 03-12-2017
(bootloader) sku: XT1687
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Fri Jan 16 3:38:17 UTC 1970"
(bootloader) ro.build.fingerprint[0]: motorola/potter/potter:8.1.0/OPSS2
(bootloader) ro.build.fingerprint[1]: 8.85-17-2/945e:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.28.211.2.potter.reta
(bootloader) ro.build.version.full[1]: il.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-08600-89xx.0
(bootloader) version-baseband: M8953_41.50.07.85R POTTER_NA_CUST
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-gea366bb-0000
(bootloader) kernel.version[1]: 4-g7402761 ([email protected]) (gcc ver
(bootloader) kernel.version[2]: sion 4.9.x 20150123 (prerelease) (GCC) )
(bootloader) kernel.version[3]: #1 SMP PREEMPT Wed Oct 10 09:19:54 CDT
(bootloader) kernel.version[4]: 2018
(bootloader) sbl1.git: git=MBM-NG-VC0.92-0-gd009c3b
(bootloader) rpm.git: git=MBM-NG-VC0.91-0-g92e5e21-dirty
(bootloader) tz.git: git=MBM-NG-VC0.91-2-g26cc248-dirty
(bootloader) devcfg.git: git=MBM-NG-VC0.91-2-g26cc248-dirty
(bootloader) keymaster.git: git=MBM-NG-VC0.91-2-g26cc248-dirty
(bootloader) cmnlib.git: git=MBM-NG-VC0.91-2-g26cc248-dirty
(bootloader) cmnlib64.git: git=MBM-NG-VC0.91-2-g26cc248-dirty
(bootloader) prov.git: git=MBM-NG-VC0.91-2-g26cc248-dirty
(bootloader) aboot.git: git=MBM-NG-VC0.92-0-g3ea8df0
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: retus
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
Finished. Total time: 0.273s
Is my device okay, and am I okay to reboot? If something is wrong, is there anything I can do to fix it? Thanks!
Hello
any one can help please, I relocked my bootloader. Since that day, I can only access : fastboot.
It seems I can flash recovery with fastboot, but the phone never boots into recovery (loop on ZTE logo B2017G ).
I've tried to put my device in EDL mode with DeepFlash cable but without success.
-------------
fastboot getvar all
(bootloader) version:0.5
(bootloader) battery-soc-ok:yes
(bootloader) battery-voltage:3447000
(bootloader) variant:TULIP eMMC
(bootloader) secure:yes
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) display-panel:
(bootloader) off-mode-charge:0
(bootloader) charger-screen-enabled:0
(bootloader) max-download-size: 0x20000000
(bootloader) partition-type:cache:ext4
(bootloader) partition-size:cache: 0x12c00000
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0x5ebb79e00
(bootloader) partition-type:system:ext4
(bootloader) partition-size:system: 0x100000000
(bootloader) serialno:bc13c89a
(bootloader) kernel:lk
(bootloader) product:TULIP
all:
finished. total time: 0.022s
------
fastboot oem device-info
...
(bootloader) Device tampered: false
(bootloader) Device unlocked: false
(bootloader) Device critical unlocked: false
(bootloader) Charger screen enabled: false
(bootloader) Display panel:
OKAY [ 0.007s]
finished. total time: 0.007s
-------
Thanks