Hello.
Do you know a site or thread which has basic instructions about making a "hello world" app for PPC? Just to get me started.
What tools do you guys use? (doesn't matter if they are free or not)
How do you export/publish it as a .CAB?
Thanks.
PS. I searched and didn't find a thread like this and I don't want to use somebody else's thread.
Are you familiar with programming?
I use Visual Studio 2005 to create my apps. It has the ability to create a *.cab file as well
Visual Studio 2005 is not free.
You can find tons of info at the MSDN.
You can also use some library simplifying access to pocketPC by taking care of all necessary OS calls. Xflib looks good, especially if you want to code games, there are also some examples provided with lib download, and sources for most games hosted on their site are available. Might be a good place to start if you'd like to avoid learning winAPI and get right down to coding the actual app Another good thing is that it uses open source ceGCC compiler, so MS Visual C isn't needed. Also, you won't really need to make CABS to distribute programs coded this way, since they consist of one single exe file.
Go to www.xflib.net for downloads and install instructions.
And if you're a total beginner when it comes to programming, I'd try scripting out first. Have a look at mortscript (good because of it's multi-platform usage) or AutoIt (for windows desktop)
Thanks for the answears so far .
I'm not a programming noob, but not profesional. I've done some apps and games. I plan to start with easy things first as a coin toss app... it comes quite handy... or perhaps a handy stuff thing, inclusing the coin toss, unit converting (there are many), dices, chronometer, etc. All with stadistics and many options, like a random mode and a rigged mode ;D for dice and coin toss...
Then move on to something greater, who knows.
For something like that I suppose visual studio is best. I'll try both anyway. Any advise?
By the way is there an emulator like toolkit for J2me? Something a friend can download to run it without a programming software (or a phone).
Thanks again.
Edit: I believe I found an emulator, at least for XFlib (found there).
Device emulators
visual studio has its own device emulators you just have to download the proper SDK's like WM6 sdk or WM5 sdk to be more device specific, it's supports emulator debuging and device debuging but apps made with VS tend to slower and more memory hungry than apps implemented in C. But for me it's the easiest way to app development.
can you post the emulators link or better yet the whole thing itself here if its small enuff? im also working in xflib and would be much easier to use a standalone emulator rather than the one with vs2008. thanks
I'd like to develop a simple app that does this.
- It takes the paths to two or more other application (.lnk and .exe) as arguments.
- It parses the arguments and upon launch it shies a screen with buttons to the files given in the arguments.
- If one of those gets pushed, it runs that file and closes itself.
- If none gets pushed, it closes itself.
Here's my problems:
I only have experience in Java programing, and my research into windows programing with C#, c++ amd .NET hasn't really led anywhere.
I have Visual Studio 05 and the required SDKs installed and it's easy enough to parse the arguments, etc.
Questions:
- What language/framework native/managed would you suggest I do it in?
- In that environment, how can I:
- create a popup as opposed to a window that is anchored top and left
- run other files (.lnk and .exe)
- implement the timer functionality
If you could point me to what classes to use for those or even supply very short code examples, I guess I could take it from there.
Thanks in advance,
Cheers,
nc
have u had a look at MortScript, you should be able to do it with that.
mugglesquop said:
have u had a look at MortScript, you should be able to do it with that.
Click to expand...
Click to collapse
I hadn't thought of that.
Good point, thanks, I'll take a look.
No joy.
While executing files, parsing arguments and timer functions are possible,the windowing features in Mortskript are somewhat limited.
I guess it has to be C++, after all.
My suggestion would be to try and write a desktop application that does what you want first and then port it - makes testing etc loads easier and nothing sounds really WinMob specific. For this project, I'd think C# or C++ should be fine
Sounds plausible, uccellino, thanks!
Hi everyone. I am starting a new Open Source project using VB.net to allow the community to build Adventure Games ala SCUMM / SCI / AGI etc... Users will be able to create games similar to Zak McKracken, Monkey Island, Maniac Mansion, Day of the Tentacle, Space Quest, Kings Quest, Police Quest, Full Throttle, etc...
Some Key Engine features:
*Point and Click game play
*GUI's
*Inventories
*Control of Multiple game characters
*NPC's
*Cutscenes
*Sounds
*Pathfinding
*Hotspots and Masks
*Lighting effects
*Z-Buffering
*Saving/Loading game states.
*And more
Game editing will be done eventually through an editor. But the files will consist of editing:
*Directory structure to contain images and sound and scripts
*XML Scripts
*Engine- Game Player
The game engine is open source. Although with every release, the compilation code will be modified as to make sure noone can get into the game contents.
The project is in design stage currently. So its fresh. What I need is a few experienced VB.NET developers. Not necessarily in .NET CF or Mobile development. But just in VB.NET. In particular I need help writing pathfinding functions.
I am also in search for a mobile VB.NET programmer who can help with the development of reading XML files more efficiently than I know how to write and also for someone to help with game compilation functions and Z-buffering. If you are interested, post here and let me know your sourceforge account and what your applying for. The site is here:
https://sourceforge.net/projects/mobilemage/
cool~looking forward to it!!!
Thank you. In a few days I should have basic Room loading done. That will probably be the first release for it.
If you don't understand what ssh or vnc is, please don't attempt this.
I am able to run Kali Linux armhf on the 13.3.1 by following this guide. It can run other distros too.
I can confirm it is working 100% and runs very smooth. Here is a link to the Linux Deploy app. You need a vnc app or a ssh app to interface with it. I recommend Real VNC Viewer. Instead of connecting to your private ip, just connect using your loopback 127.0.0.1 It is faster.
I hope this could be of some use towards cracking the bootloader. Comments, questions, discussion wanted.
Nice idea but what can you really do on Kali that you can't do via adb shell?
PS putty ftw!
Sent from my Nexus 4 using Tapatalk
Spec-Chum said:
Nice idea but what can you really do on Kali that you can't do via adb shell?
PS putty ftw!
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Install linux native applications, light server, supports many linux distros like gentoo arch debian ubuntu fedora. Aircrack-ng, reaver, sslstrip, metasploit. The fun stuff.
Faznx92 said:
Install linux native applications, light server, supports many linux distros like gentoo arch debian ubuntu fedora. Aircrack-ng, reaver, sslstrip, metasploit. The fun stuff.
Click to expand...
Click to collapse
Nice, I'm sold
Repurpose a device
I would really like to get a different OS on my device or even do a GRUB bootloader kind of thing which will allow Android or another OS. I want to repurpose a tablet for my car project and I don't want to use Android.
I have done the VNC thing in the past with Ubuntu and it was horribly slow. Anything emulating on top of an OS will be less than optimal. I have used VMPlayer and VirtualBox before on a regular desktop and they seem ok. But still I'd like another OS that will be fast on boot up and ready to go in the shortest amount of time.
chris
This is very interesting. Has anyone managed to get Mer working through Linux Deploy? Having Plasma Active running like that would be pretty awesome. Other DEs aren't really optimised for touch the way Plasma Active is.
EDIT: Actually, it might be possible to get Plasma Active running via Gentoo, as they have an overlay for it. Still experimental, but then what isn't experimental at this point
GreatEmerald said:
This is very interesting. Has anyone managed to get Mer working through Linux Deploy? Having Plasma Active running like that would be pretty awesome. Other DEs aren't really optimised for touch the way Plasma Active is.
EDIT: Actually, it might be possible to get Plasma Active running via Gentoo, as they have an overlay for it. Still experimental, but then what isn't experimental at this point
Click to expand...
Click to collapse
You use a vnc app on loobback address(127.0.0.1) to connect. It is the fastest emulation I ever had running on any device. This is perfect for me if i can get a keyboard working. If you lower the resolution of the linux guest with a ui like lxde it is very easy to use it as a touch interface.
Mr_Ada said:
I would really like to get a different OS on my device or even do a GRUB bootloader kind of thing which will allow Android or another OS. I want to repurpose a tablet for my car project and I don't want to use Android.
I have done the VNC thing in the past with Ubuntu and it was horribly slow. Anything emulating on top of an OS will be less than optimal. I have used VMPlayer and VirtualBox before on a regular desktop and they seem ok. But still I'd like another OS that will be fast on boot up and ready to go in the shortest amount of time.
chris
Click to expand...
Click to collapse
Try it out on the loopback address 127.0.0.1 It is blazing fast with ui like lxde or xfce. Fastest I ever seen on a tablet/android.
Faznx92 said:
You use a vnc app on loobback address(127.0.0.1) to connect. It is the fastest emulation I ever had running on any device. This is perfect for me if i can get a keyboard working. If you lower the resolution of the linux guest with a ui like lxde it is very easy to use it as a touch interface.
Click to expand...
Click to collapse
Yea, thanks. I'll read a bit more on Linux Deploy to see how it works. And I'm very familiar with Gentoo (have three Gentoo devices here), so setting it up shouldn't be a problem. I also asked on their IRC, and they said Plasma Active should theoretically compile on Gentoo ARM, but nobody ever tested it. Sounds like a good opportunity to do just that!
Got to run Gentoo, although it required a bit of effort. Since I want Plasma Active, I didn't choose any GUI (I need to set it up manually). However, the problem is that SSH wouldn't run, either, citing that OpenRC wasn't started itself, and that I had to execute touch /run/openrc/softlevel in order to get it to start. Which is nice and all, but it's a circular dependency: to create the file, I need to log in through ssh, and to log in through ssh I need to create the file. So I ended up doing this:
Create a bash script file with that line
Upload it to the device (I put it in the downloads directory)
Do a "chmod 777 /datamedia/media/0/Download/<myscriptfilename>.sh"
In Linux Deploy:
Enable Custom mount (leave the path default)
Enable Custom startup
Set Script file to "/mnt/0/Download/<myscriptfilename>.sh"
That allowed me to create that file and start sshd correctly. So now I can log in via ssh, yay!
It makes me wonder, though – is there a support forum for Linux Deploy in English? Their main forum seems to be Russian...
GreatEmerald said:
Got to run Gentoo, although it required a bit of effort. Since I want Plasma Active, I didn't choose any GUI (I need to set it up manually). However, the problem is that SSH wouldn't run, either, citing that OpenRC wasn't started itself, and that I had to execute touch /run/openrc/softlevel in order to get it to start. Which is nice and all, but it's a circular dependency: to create the file, I need to log in through ssh, and to log in through ssh I need to create the file. So I ended up doing this:
Create a bash script file with that line
Upload it to the device (I put it in the downloads directory)
Do a "chmod 777 /datamedia/media/0/Download/<myscriptfilename>.sh"
In Linux Deploy:
Enable Custom mount (leave the path default)
Enable Custom startup
Set Script file to "/mnt/0/Download/<myscriptfilename>.sh"
That allowed me to create that file and start sshd correctly. So now I can log in via ssh, yay!
It makes me wonder, though – is there a support forum for Linux Deploy in English? Their main forum seems to be Russian...
Click to expand...
Click to collapse
Great job! It looks like the original dev was russian and their github is in russian but use google translate. Hope this helps.
Android Terminal Emulator
Faznx92 said:
Great job! It looks like the original dev was russian and their github is in russian but use google translate. Hope this helps.
Click to expand...
Click to collapse
I actually took concepts from Linux Deploy and Complete(??) Linux Installer, and built a set of scripts to do all the chroot work without needing an Android app. Since I primarily use the terminal, running everything from the shell is much easier than using an app.
Using something like Android Terminal Emulator, you do not need ssh on the android side at all. You simply su to root and run a chroot command:
chroot <linux-mnt-pt> /bin/bash -i
or
chroot <linux-mnt-pt> /bin/su <user>
or
chroot <linux-mnt-pt> /bin/login <user>
The last option requires typing a password, but since it's a login, it sets up your environment correctly. The other two inherit your Android PATH (among other things), so you have to set PATH by hand or use an rc file which sets it from scratch.
Personally, I find even LXDE much too slow for regular use over vnc. Most of my interest revolves around emacs and gcc, which both work great in Android Terminal Emulator.
-Pie
Faznx92 said:
Great job! It looks like the original dev was russian and their github is in russian but use google translate. Hope this helps.
Click to expand...
Click to collapse
Ah, thanks for pointing that out. His issue list is in English, and that's exactly what I need!
I talked to people over at #systemd to see if it would be possible to have systemd launching things in a chroot, and unfortunately it seems to be impossible for the Kindle Fire HDX 7, because its kernel is not compiled with PID namespaces that systemd requires to function, and we don't have any means to compile custom kernels as far as I know. It's too bad, but I guess I can cope with OpenRC for now.
EatingPie said:
I actually took concepts from Linux Deploy and Complete(??) Linux Installer, and built a set of scripts to do all the chroot work without needing an Android app. Since I primarily use the terminal, running everything from the shell is much easier than using an app.
Using something like Android Terminal Emulator, you do not need ssh on the android side at all. You simply su to root and run a chroot command:
Click to expand...
Click to collapse
Interesting, although I do prefer an app (it's really quite convenient). Also, as far as ssh goes, I do prefer having that running over typing things into the terminal using the touchscreen.
Overall the experience of running Gentoo on ARM is interesting. The Snapdragon 800 is really quite a beast, but rather peculiar. There are often delays before my input starts to be processed, but once it does, it runs very fast, until it goes idle again. And the speed at which it compiles things is amazing. It's also nice that I can use all of those nice optimisations (I'm using -march=native and -mfpu=neon-vfpv4, with the neon USE flag enabled; I'd like to set -mcpu to something specific, but it doesn't seem to have Snapdragon as an option).
Ubuntu os
Maybe sometime we would be able to get Ubuntu os on our tabs.
zhable said:
Maybe sometime we would be able to get Ubuntu os on our tabs.
Click to expand...
Click to collapse
You already can, although it's limited to the desktop version (which isn't any good when it comes to touchscreens). Not sure if Ubuntu Touch will be available at some point. But eventually Ubuntu will ship Unity 8, which will be more touch-friendly.
This is all great news!
GreatEmerald said:
Overall the experience of running Gentoo on ARM is interesting. The Snapdragon 800 is really quite a beast, but rather peculiar. There are often delays before my input starts to be processed, but once it does, it runs very fast, until it goes idle again. And the speed at which it compiles things is amazing. It's also nice that I can use all of those nice optimisations (I'm using -march=native and -mfpu=neon-vfpv4, with the neon USE flag enabled; I'd like to set -mcpu to something specific, but it doesn't seem to have Snapdragon as an option).
Click to expand...
Click to collapse
I don't think -march=native is doing anything there buddy.
GCC doesn't officially "support" Krait (yet), nearest I can see would be Cortex-A9 which uses the same scheduling model (albeit with 3 less pipeline stages) as a Krait. Interestingly, LLVM/Clang has just patched in a krait -mcpu target, if you can use that. To be honest you'll not be gaining too much as, IIRC, the main difference between a Krait and an A9, in compiler specific terms, is vfp4, but you're setting that with the -mfpu option anyway.
My point after spouting that gibberish is to not sweat it, lose -march, change -mcpu to cortex-a9 and you're golden. At least until a krait mcpu target for GCC...
Spec-Chum said:
I don't think -march=native is doing anything there buddy.
GCC doesn't officially "support" Krait (yet), nearest I can see would be Cortex-A9 which uses the same scheduling model (albeit with 3 less pipeline stages) as a Krait. Interestingly, LLVM/Clang has just patched in a krait -mcpu target, if you can use that. To be honest you'll not be gaining too much as, IIRC, the main difference between a Krait and an A9, in compiler specific terms, is vfp4, but you're setting that with the -mfpu option anyway.
My point after spouting that gibberish is to not sweat it, lose -march, change -mcpu to cortex-a9 and you're golden. At least until a krait mcpu target for GCC...
Click to expand...
Click to collapse
Nope, -march=native sets -march to armv7-a, which is close enough. The point in using it is that as soon as GCC gets better optimisations, -march=native will use the more optimised choice, without manual intervention.
too slow download
very slow retrieving of files from server i have a 2 mb/s line
any idea how should i retrive it offline
---------- Post added at 06:24 PM ---------- Previous post was at 06:00 PM ----------
suit urself and paste any one link in mirror url in linux depoly settings for kali and other deployments
http://http.kali.org/README.mirrorlist
remove the readme when adding the url ... press thanks nd make me feel aprreciated