Lg e-610 l5 bricked after chainfire 3d - Optimus L3, L5, L7 Q&A, Help & Troubleshooting

Hey guys. I rooted this phone with no problem, but when i installed Chainfire 3d and installed its' drivers, phone should reboot but didnt. So i turned it on but its BRICKED ;/ Cant enter to emergency mode / download mode / cant wipe. I didnt install CWM. Its stuck at LG logo. Is there any hope for saving this phone? Please help
edit
I can unter download mode by pressing vol down + plugging usb without battery
edit2
YEEES i unbricked it using LGMobileUpgrade, it did OVER 1 h but its worth it

Try hard reset
Sent from my LG P705 using XDA Software

Related

[Q] LG Optimus p700 L7 stuck in recovery mode

Hello guys.. I try to update something (I really don't know what), after updating phone was stuck in recovery mode.. When I turn on phone shows LG logo, then yellow backgroud "EMERGENCY MODE".. I try to repair with LG Support Mobile Tool but program can't recognize phone, when using Volume + and power program recognize phone, but after 3-5 sec stop.. I try reinstall lg drivers but nothing.. How to fix this does someone know ? Sorry for my bad english
Thanks

[Q] Update to 4.4.2 and since the device is bootloop and no recovery

I bought a LG g2 D802 32G with root a few days ago , I tried to upgrade to 4.4.2 stock from this guide. The upgrade was completed
Then the device turns on ,frist LG logo ,then the Attached image and after a second shuts down and back on, with stuck LG logo with led change colors.
I can't get into the recovery mode with any method, only download mode. I tried to flash another versions, it completed but the same problem ...
Also, when i enter into download mode written down in a frame rooted in red, but i flash a stock ROM in "Flash CSE" mode... can be recovery mode screwed? And that's why the device does not work?
I tried also via LG Support Tool same problem ....
Reset my strength
How do I fix this?
please try to help?
ohad123 said:
I bought a LG g2 D802 32G with root a few days ago , I tried to upgrade to 4.4.2 stock from this guide. The upgrade was completed
Then the device turns on ,frist LG logo ,then the Attached image and after a second shuts down and back on, with stuck LG logo with led change colors.
I can't get into the recovery mode with any method, only download mode. I tried to flash another versions, it completed but the same problem ...
Also, when i enter into download mode written down in a frame rooted in red, but i flash a stock ROM in "Flash CSE" mode... can be recovery mode screwed? And that's why the device does not work?
I tried also via LG Support Tool same problem ....
Reset my strength
How do I fix this?
Click to expand...
Click to collapse
Using the flash tool will take your phone completely back to it's original factory state and that includes the recovery. If you get stuck in a bootloop after using this method, you should be able to fix it by performing a hard factory reset.
When the device is powered down hold the volume down button. While pressing volume down press the power button. After the device kicks on release both buttons. As soon as the LG logo appears press the power button a second time. It's a little tricky at first but if you have done it correctly it should go into a white screen asking you if you would like to perform a factory reset. Go ahead and reset the phone.
This should fix your problem and boot you up into a fresh install.
I tried this but it dose not work, I can't get into the recovery mode. the g2 stuck LG logo....

[Q] LG G2 Bricked during updation

Hi my LG G2 D802 is bricked during updation through LG PC suite.
I tried to recover using LG PC SUITE AND LG Mobile upgrade tool, But it is HELPLESS.
I tried Factory reset by using Vol- + power button combination., But it is also HELP LESS.
I am getting LG LOGO if the phone was switched on.
I am able to enter into DOWNLOAD MODE and it is coming into fast boot mode.
Please anyone help me

Help is there no out for this!?

HI, i need help, I have Lg G2 D802. It Hangs on LG logo screen with a blinking led. i can go to download mode but the pc just does not recognize the phone (drivers are installed)... if i connected and turn on the phone by normal way it gets stuck at lg logo but the pc recognize it, but if i connected in download mode does not recognized ! ( i need the pc recognized the g2 in download mode for using lg flash tool in order to flash .tot stock firmware) any fix??
what brought me to this is that i was on kitkat and i upgraded to lollipop everything went fine but when booted up the touch screen was crazy all over the place so i tried to go back to stock used the kdz method thats when i got the stuck logo i tried to factory reset but after clicking yes the phone reboots immediately
please help i never faced these problems with other companies i think this is my first soft brick?

d802 hard bricked, cant enter recovery, download mode, any advice appreciated

Hiya I managed to brick my d802 after wipng from twrp I believe.
It seems hard bricked and nothing is working, all the happens when I boot is that i gets stuck in the LG logo. If I try download mode its not working, and impossible to boot into recovery mode, when I hit the power button all it shows is "charging! ??/100" in a yellow font in download mode
Its not showing up in windows device manager as anything but "charging" also tried the guide on short circuiting the connections on the processor and its not responding to that also.
Ive attracted a link to a screenshot of the charging error. any advice is appreciated.
https://drive.google.com/file/d/1OO6...ew?usp=sharing
If it's stuck in LG logo, it's possible to turn it off completely, put it in download mode with a computer and flash a stock kdz. No need to fry the transistors.

Categories

Resources