Hi, I'm not sure if I posted in good thread category, since I couldn't find a thread for my tablet, maybe I should explain why I posted in here:
It's a Generic tablet 703H I suppose, but I'm not sure if that's the model, it is running "Full AOSP on Rk29sdk" I suppose, (at least that's what AnTuTu benchmark told me before) I rooted the device using this and it WORKED, but when I decided to go into a recovery mode (I wanted to install CWM from here) but when I run my tablet with POWER and VOL+ (so I could enter STOCK recovery IF THERE IS ANY) all I got was an android lying on his back with opened chest, since that I can't do anything on it, I turn it off and on but nothing happens, I tried every keys and nothing helped. And when I plug the tablet so it will charge, I do not get battery animation, but yet again the same screen. But later I spotted that before that shows up it flashes with standing android with something blue spinning in his chest (Is it download mode maybe?) So I decided to plug the tablet to my laptop and see what happens. Before it was recignized as "Full" (ADB Drivers which I used to root) but now it showed up for a while as something about Nexus (not sure it google or galaxy) tablet. I am confused because now it again shows as Full. I wanted to flash it because it lags terribly (Android 4.0.4, kernel 3.0.8) and it bugs a lot (like "return" key was staying as "down" key)
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If it's not the correct thread category please move it, I didn't find correct place for it by myself
I understand this is not Nexus tablet but still this is what USB drivers installed on my Win7 flashed me about
If it helps - I can use Ubuntu (most of things about computer I do through Ubuntu, yet never about any external devise)
Problem Solved
Fixed tablet with a bootable SD card, if it's needed I can post how I managed to fix it.
[HELP] AOSP on RK29SDK FULL BRICK
...
Related
Heres my problem, i have the basic **** 1.5 rom that comes with the G2 Touch (HTC Hero) and T-Mobile being pathetic have cocked things up with the 2.1 update. again.
Im Trying to Flash an old Rom from the HTC website (still better than the default i have), to entice the download of part 1 of 2.1 but it refuses to connect Via USB as soon as i run the program. I got it to work once and it keeled over and Died within seconds.
This is the Rom im trying to Flash:
http://www.htc.com/europe/SupportDownload.aspx?p_id=283&cat=2&dl_id=775
I use Windows 7 32Bit
I just upgraded to:
HTC Sync 2.0.33
The Rom downloads as:
RUU_Hero_T-Mobile_UK_2.73.110.26_R_release_signed_NoDriver.exe
Windows recognises the device fine, it shows up "green" in HTC Sync, Its recognised in "Devices and Printing" as Android Phone.
but as soon as I run the above .exe to upgrade the rom, it disconnects the android from windows, and then tells me that its not connected via USB. retard developers!
Now im really coming to an end with this phone, its doing my nut in.
I managed to get it to run the update somehow, i cant remember how i did it, pulling the usb out and adding it at different stages, somehow lol, and it only started, then died giving me this mess:
Comes up in "Devices and Printing" as an unspecified device called "android 1.0" with the hardware name HTC Bootloader, type ADB Interface
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Closer
I did what it said in the Readme and took the battery out and rebooted, and im back to square one.
Its just physically impossible for me to get off this bloody default ROM!
please help me!
Wait, i think i cracked it. I created a Goldcard and after 2 attempts running the RUU_Hero_T-Mobile_UK_2.73.110.26_R_release_signed_NoDriver it worked!
and as soon as the phone started the "update" popped up for the 2.1 part 1!
yeah boy!
Make sure you have the correct drivers for windows 7
http://forum.xda-developers.com/showthread.php?t=647353
Do not use this to install an Over-The-Air update from EVGA/Nvidia. Use the stock recovery for that.
Do not use this on any Tegra Note 7 besides the one by EVGA. Other variants are untested.
Download: CWM for Tegra Note 7
Instructions:
--- MUST BE UNLOCKED!--- (fastboot oem unlock) Note, that will wipe data.
Code:
fastboot flash recovery tegranote-cwm.img
Bugs:
Upside down graphics (PS: The recovery isn't upside down, you're just holding it wrong :-$)
No external SD-card or USB OTG support.
Does NOT backup BOOT.IMG, RECOVERY.IMG, or STAGING.
Source (Device Tree): Device Tree for Tegra Note 7 CWM
Source (CWM): Github for CM11 Android_bootable_recovery
Source (Kernel): Ask NVIDIA! It's a stock kernel from the 4.3 firmware.
Changes I made into CWM are included as attachments if you want them (rename recovery.c.txt to recovery.c and place in /bootable/recovery/) (copy icon_clockwork.png into /bootable/recovery/res/images/). I swapped the Volume Keys Up and Down because this one is still upside down. Doesn't seem to be a good way to go about flipping it without breaking things. If you can fix it, please do.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Confused, why is there 2 recoverys?? You have more issues than me
You didn't open source your device tree.
Sent from my XT1053 using Tapatalk
(╯°□°）╯︵ ┻━┻
table flip time (sorry I don't know an emoji for flipping a display round..)
tested on Advent Vega Note 7
There are some slight issues, like the log is still upsidedown, and the font is massively small (can be customised in the boardconfig), but other than that, should be fine
Whats required to make SDcard1 mount point to fully work?
I have also pestered Nvidia for Kernel OpenSource but as of yet still waiting to get a reply.
I can get a full Partition read out if that is required though.
Info
+ Clean install of Windows 10
+ Motorola USB drivers installed
+ Installed the latest Motoactv firmware (MA 1.7.10 N8) and rooted
+ Installed TCX exporter since Motoactv site is unreliable/dying.
Boast
+ This device is still amazing. Its battery life on marathon mode actually lasted as I finished a marathon. There is no competitor out there that has 8GB storage for music, decent battery life and doesn't cost over $200, even the upcoming TomTom Spark.
Problems
- Motoactv doesn't charge when plugged into a wall charger. Will only charge using a USB port.
- Cannot make the device show up as a USB storage device so I can sync with Doubletwist
- Cannot sync with iTunes due to problems with Motocast, Nero/Motorola Media Link software
-- Despite updating to the latest Java 32 and 64 bit, I'm still greeted with this message:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Question
How can I enable usb storage on the fly without having to run the MotoACTV Root Tool and "stop adb and enable USB"?
Why does the Motoactv not charge when using a wall charger?
Bump.
adb shell am start -a com.android.settings.APPLICATION_DEVELOPMENT_SETTINGS: Gives option on Actv screen to disable USB Debugging (turn off ADB permanently). Note, you can only access this option WITH ADB, so once you turn it off, you can only gain ADB back by reflashing the boot image (generally the 1.6.0 boot image).
Found this from: http://motoactv.wikispaces.com/useful_adb_fastboot_command
Worked great on my motoactv and my friends. If I remember correctly you want to make sure the screen not asleep on the motoactv when you run the command. Hope this helps! Still loving my motoactv.
Quintman said:
adb shell am start -a com.android.settings.APPLICATION_DEVELOPMENT_SETTINGS
Click to expand...
Click to collapse
That worked.
Still loving my motoactv.
Click to expand...
Click to collapse
Amen.
Hi,
I've hard bricked my Pro 5. No recovery access, no boot to rom, locked bootloader. After many search i see this : https://forum.xda-developers.com/meizu-pro-5/how-to/meizu-customer-service-flash-tools-save-t3447678, but this is bull-****.
I test many manipulations to get something on my phone other than "Bootloader, Locked".
So i dicovered this : Press and holp Vol + and Vol - and press one time power button. We get this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After research about this, we get this :
http://forum.gsmhosting.com/vbb/f777/galexy-s6-exynos-7420-dead-1975230/#post12369382
And this :
http://www.mediafire.com/file/9qmezaezy1fyzrr/Galaxy_S6_Boot_recovery.pptx
Possible way to unlock hardbricked Pro 5 ?
Same way exist for Qualcomm Processor : http://www.androidbrick.com/unbrick...-have-the-right-kind-of-rom-qhsusb_dload_edl/
Subscribed, i do also have a spare "bricked" device
same problem here bro.tried everything..only mode available is fastboot and locked bootloader.in pc device manager i get unknown android 1.going to investigate the problem futher more.pls keep us in touch.tnx
barbonee said:
same problem here bro.tried everything..only mode available is fastboot and locked bootloader.in pc device manager i get unknown android 1.going to investigate the problem futher more.pls keep us in touch.tnx
Click to expand...
Click to collapse
Hey there. Got the same problem. Tried everything. Nothing happens. Have you got your problem solved yet?
The same problem
Sent from my PRO 5 using Tapatalk
Only way to solve this is taking the phone to technical service. Done it myself. Be careful tought, they will try to make you change the entire mother board (280€), but if you insist they will "find a way" to install the correct software in your phone and leave it as if it was new
it is possible to recovery via dongle ... but sn and imei can be lost
Try this thread.
https://forum.xda-developers.com/me...hard-bricked-lost-t3838461/page2#post79752427
Try this thread; it worked perfectly for me.
Hey guys,
I'm posting here as a last resort before a factory reset.
By the way, let me first say that I'm sorry to post this here, as I know it's SO stupid, what's happening.
I had the same lock pattern for 2 years now, never had a problem.
Last week, it just fell out my mind completely. I've been trying for 4 days straight to remember it.
It's quite a complicated one, with the pattern tracing deactivated so I can't remember the shape and my thumb tried with its motor memory but to no avail :x
The thing is, I extensively use the notepad stock app (Samsung Notes ? Android Notes ?) and I have a **** TON of info I REALLY don't want to lose. And it's not on the SD card, ofc.
I don't care much about the rest, to be honest.
Fun fact, I only synced contacts via the android sync function.
So how can I either remove the lock pattern or access my phone files with an explorer on my computer (I guess I can find a memory file for the notepad somewhere), knowing that :
- Not rooted
- USB debugging not activated
- Not registered with Samsung account
- Android version is the latest available in France for an SM-A510F as I do all updates
I can provide as much as I can to prove my ownership of the phone if needed.
Thank you for reading and maybe for helping.
You have absolutely every right to laugh to my (dumb) face.
EDIT :
Just tried something else. Booted in recovery to try an ADB command.
Since Windows didn't recognize the phone in recovery mode, I selected the option "Load package with ADB" or something like that.
Now the phone was listed in devices on ADB and I tried this : adb shell rm /data/system/gesture.key
Result : error.
Great.
So since the phone was unresponsive to any button, I waited and there was a timeout on the package load.
BUT NOW...
I have a blue screen that says "Error!" and it's completely unresponsive.
GREAT.
I'm off to work, read you soon.
XOXO
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
<Mod Edit>
Thread closed by OP request.