Database Users

Solution for soft-bricked N9005 after flashing Hong Kong's TGY firmware

I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.

doclucas said:
I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.
Click to expand...
Click to collapse
Thanks buddy for helping me, got me up and running again :good:

You're welcome, mate!

Softbrick
Thank you thank you thank you thank you .
I always liked Hong Kong roms on note one and two and I thought I can continue the tradition .
Softbricked it , and no solution anywhere . I installed this and voila . Back in business . I also installed MJ7 on top now all is good .
Have I said thank you ?
Well thank you !

budalica said:
Thank you thank you thank you thank you .
Have I said thank you ?
Well thank you !
Click to expand...
Click to collapse
You're welcome. Did you press the "Thank you" button?

Thanks a lot. Without your post, my phone will still be bricked.

hh
That day! ! Me too

Useful info, I'm sure this will be of use in many situations.
Thankyou.
Sent from my GT-I9100 using Tapatalk 4

uscool said:
Thanks buddy for helping me, got me up and running again :good:
Click to expand...
Click to collapse
could someone please upload that firmware again on some other hoster? because hostfile isnt working anymore. couldnt find the file on any other server by myself.

lalahamid said:
could someone please upload that firmware again on some other hoster? because hostfile isnt working anymore. couldnt find the file on any other server by myself.
Click to expand...
Click to collapse
Here is the newer version from UK BTU: N9005XXUDMJ7_N9005OXADMJ4_BTU.zip
http://terafile.co/29f621508415

doclucas said:
I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.
Click to expand...
Click to collapse
my brick story in short is------ brought note 3 sm-n9005 from ebay from a Hong Kong based seller. pics of ap, cp and csc are attached. rooted with chainfire's and installed cwm6 by chenglu. A few days back, flashed bobcat rom version 2(mj7) and later 3( mk2 ) without problems. Was looking for different themes .yesterday flashed balckchrome from s4 forum that also went smooth. Unfortunatly flashed another theme for s4 which was not meant for andriod version 4.3. Pretty stupid .went into bootloop. Had nandroid backup tried to restore but couldn't.
Flashed another rom mk2 from cwm. again bootloop .took the odin route and flashed stock deodesk mj7 by Djembey from this thread.
http://forum.xda-developers.com/show....php?t=2461929
Failed again. Then downloaded latest mk2 from sammobile website. The same error (invalid ext4 img) in short failed on all ccounts. Have run out of options. The last thing in mind is to wait for some new bootloader after mk2 which might rescue me as mentioned in this thread that new bootloaders might help... Any guidance will be appreciated. Thanks

@pyarajaani
Try this:
1) Get X-Note v6 custom rom.
2) Use Odin to install CWM recovery.
3) boot the phone into CWM recovery and copy the X-NOTE rom (MK2 based) to your phone or card.
4) Do a complete wipe/factory-reset from CWM
5) Install the X-NOTE rom from CWM
And let me know how it went

doclucas said:
@pyarajaani
Try this:
1) Get X-Note v6 custom rom.
2) Use Odin to install CWM recovery.
3) boot the phone into CWM recovery and copy the X-NOTE rom (MK2 based) to your phone or card.
4) Do a complete wipe/factory-reset from CWM
5) Install the X-NOTE rom from CWM
And let me know how it went
Click to expand...
Click to collapse
Why did you suggest X-Note but not another ROM?

3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always replace a ROM later on if he wishes.

doclucas said:
3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always
replace a ROM later on if he wishes.
Click to expand...
Click to collapse
Thanks for the suggestion. ..tried twice with both stock n Civato kernels.. didn't go beyond Samsung logo screen....With Civato there appears some error above the logo...pics i m attaching. .Thanks again.

doclucas said:
3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always replace a ROM later on if he wishes.
Click to expand...
Click to collapse
Nope, I didnt mean what is the best rom to use.
The problem is that how to bypass the bootloop issue.

pyarajaani said:
Thanks for the suggestion. ..tried twice with both stock n Civato kernels.. didn't go beyond Samsung logo screen....With Civato there appears some error above the logo...pics i m attaching. .Thanks again.
Click to expand...
Click to collapse
No need to mess with kernels.
Were u able to install cwm via odin and then boot into cwm?

doclucas said:
No need to mess with kernels.
Were u able to install cwm via odin and then boot into cwm?
Click to expand...
Click to collapse
yes...I did that n installed X note rom from cwm. BUT I suspect that cwm is not fully functional. Why I m saying this is that I have a nandroid backup of bobcat mj7 rom...which cwm isn't able to detect even. ..nevertheless. .cwm is installed.

1) Which CWM version do you have installed?
2) Did you do a full wipe/factory-reset?
3) Did you try also advanced formatting (of system partition together with the full wipe) and then install the ROM?
4) Did you try all the above with the latest TWRP recovery instead of CWM?
http://forum.xda-developers.com/showthread.php?t=2467255

Try to flash this file by cwm first and then flash any rom after you want
https://www.dropbox.com/s/bibytggk2m8npw8/Brick_Loop_FIX_Fix.zip
Sent from my SM-N9005 using Tapatalk

[Q] updating problem GT-I9500

hey guyz my gf is using s4 from past year now, and it is still on android 4.2.2 (screen shot attached for details)
:crying:
shes having problem of updating it to next versions of androids 4.3.x, 4.4.x
when we try to update from samsung update (setting-->about-->software updates) it shows up to date
when we try to install via kies it shows latest firmware installed.
what should we do now ,thanks in advance.

Itsakash said:
hey guyz my gf is using s4 from past year now, and it is still on android 4.2.2 (screen shot attached for details)
:crying:
shes having problem of updating it to next versions of androids 4.3.x, 4.4.x
when we try to update from samsung update (setting-->about-->software updates) it shows up to date
when we try to install via kies it shows latest firmware installed.
what should we do now ,thanks in advance.
Click to expand...
Click to collapse
You have some options:
1. Flash a custom firmware through custom recovery.
2. Download the latest firmware and flash it through ODIN. For know what firmware is the best for you, conect it to Kies and tell me the 3 letters close to ur CSC

Joku1981 said:
You have some options:
1. Flash a custom firmware through custom recovery.
2. Download the latest firmware and flash it through ODIN. For know what firmware is the best for you, conect it to Kies and tell me the 3 letters close to ur CSC
Click to expand...
Click to collapse
Thanks for quick reply.
I already attached image showing csc characters.( MJ5(INU))
Does flashing firmware through odin void warrenty?
there is no way to get official update via software update or kies?

its just the update didt arrived for your country and there is 2 solutions :
1- wait till the update arrive
2- download & falsh the Update VIA Odin
if you flash it with odin nothing wrong will happen i just recommend you to backup everything :good:

RubbaBand said:
its just the update didt arrived for your country and there is 2 solutions :
1- wait till the update arrive
2- download & falsh the Update VIA Odin
if you flash it with odin nothing wrong will happen i just recommend you to backup everything :good:
Click to expand...
Click to collapse
one question, can i flash android 4.4.2 firmware over 4.2.2 via odin directly?

Itsakash said:
one question, can i flash android 4.4.2 firmware over 4.2.2 via odin directly?
Click to expand...
Click to collapse
you need to flash 4.3 then 4.4.2 Because of the bootloader

RubbaBand said:
you need to flash 4.3 then 4.4.2 Because of the bootloader
Click to expand...
Click to collapse
ok,so do i need to flash all updates that are passed over 4.2.2 up untill now to get the latest 4.4.2 or any one 4.3 firmware will work, and then 4.4.2 firmware ?
Where can i download all these firmwares?

Download 4.3 Here
You Want to download 4.4.2 you will need to signup to www.sammobile.com
then enter firmware section then search for your device in search bar "GT-I9500" then choose country and download
PS: if you dont know how to flash VIA Odin Search XDA or Google it

Galaxy S4 I9505 fresh KitKat

Hellou,
Recently I bought Samsung Galaxy S4 I9505. Unlocked and updated to KitKat 4.4.2. It was used i CH for a very short time, but now, it will be used in BiH. Somewhere I read that KitKat was distributed for different regions, so as phone is moved from CH to BiH, I want to do fresh install of KitKat.
From where should I download appropriate KitKat and what is the easiest way to install fresh KitKat, and also root my phone?
Informations can be seen in attachment.

1. Install Kies 3. Look for the 3 letters btw parenthesis close CSC. It will give u the code for know what firmware you have to download.
2. Go to Sammobile.com, log and sig in (pic 1)
3. Look for your firmware and download it
4. Flash it through ODIN like in the pic attached 2
5. Enjoy it

Joku1981 said:
1. Install Kies 3. Look for the 3 letters btw parenthesis close CSC. It will give u the code for know what firmware you have to download.
2. Go to Sammobile.com, log and sig in (pic 1)
3. Look for your firmware and download it
4. Flash it through ODIN like in the pic attached 2
5. Enjoy it
Click to expand...
Click to collapse
delete post

sonnyblack100 said:
Now I have a problem. My Galaxy S4 I9505 is updated to KitKat 4.4.2 and I need to insert SIM card from BH Telecom (Bosnia and Herzegovina).
And KitKat 4.4.2 is not yet available for BH Telecom. Assume I should downgrade my phone to 4.3, as it is last version available for BHT.
But I read about many problems with downgrading from 4.4.2 to 4.3
What should I do?
Click to expand...
Click to collapse
1. Unlock ur phone thorugh IMEI. You can find a lot of pages in Internet that do this cheap.
2. You cant downgrade ur phone without millions of problems (signal lost, no sound, no wifi, random reboots....). Dont do it :highfive:

Joku1981 said:
1. Unlock ur phone thorugh IMEI. You can find a lot of pages in Internet that do this cheap.
2. You cant downgrade ur phone without millions of problems (signal lost, no sound, no wifi, random reboots....). Dont do it :highfive:
Click to expand...
Click to collapse
I messed up updates related to regions and operators. My phone is unlocked as I mentioned above, so I can use my BHT card, so you can ignore my previous post. But what about updates? I must wait every time those updates for CH region?
Can someone give detailed explanation what these distributions according to region mean? Why there is not ONE OFFICIAL ANDROID DISTRIBUTION for specific phone model?

Important Notes Regarding 6.x upgrade - Please read

Hi guys this thread is regarding Updating your mobile Firmware to 6.0[especially for N9208, although is applicable for other models as well]
First, lets observe two scenarios in which you might be
CASE- 1
You are rooted
To upgrade you'll need to first download the latest firmware or atleast the same firmware as the one in which you currently are [Ex. You have APC1 you can download APC1 or higher(APC3) however at this point you cannot install any firmware lower than what you already have (Ex.AOK8)]
After you've downloaded the firmware compatible with your phone,I would recommend you to make a nandroid backup and then Flash it through odin
Instructions [From Sammobile]
Extract (unzip) the firmware file
Download Odin v3.10.7
Extract Odin ZIP file
Open Odin v3.10.7
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Now go to software updates and update to android 6.x
CASE-2
You are not rooted and have not tripped Knox
Now this case is important especially for N9208 users. To upgrade you'll have to simply wait for the firmware to be available for your device and region specifically. If you try to flash a Firmware other than your region [Ex.Taiwan that has 6.x ota] you'll not only be highly likely to trip knox but also take an attempt to downgrade your firmware (Taiwan 5.1.1 is still not APC3).

I know the instructions seem pretty straight forward and general. However I received 3 PMs regarding the above concern so I thought to share with you guys.
I'll add a few more info soon

Lucas Eugene said:
Hi guys this thread is regarding Updating your mobile Firmware to 6.0[especially for N9208, although is applicable for other models as well]
First, lets observe two scenarios in which you might be
CASE- 1
You are rooted
To upgrade you'll need to first download the latest firmware or atleast the same firmware as the one in which you currently are [Ex. You have APC1 you can download APC1 or higher(APC3) however at this point you cannot install any firmware lower than what you already have (Ex.AOK8)]
After you've downloaded the firmware compatible with your phone,I would recommend you to make a nandroid backup and then Flash it through odin
Instructions [From Sammobile]
Extract (unzip) the firmware file
Download Odin v3.10.7
Extract Odin ZIP file
Open Odin v3.10.7
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Now go to software updates and update to android 6.x
CASE-2
You are not rooted and have not tripped Knox
Now this case is important especially for N9208 users. To upgrade you'll have to simply wait for the firmware to be available for your device and region specifically. If you try to flash a Firmware other than your region [Ex.Taiwan that has 6.x ota] you'll not only be highly likely to trip knox but also take an attempt to downgrade your firmware (Taiwan 5.1.1 is still not APC3).
Click to expand...
Click to collapse
can i flash this mm rom into malaysia XME version note 5?

Lucas Eugene said:
I know the instructions seem pretty straight forward and general. However I received 3 PMs regarding the above concern so I thought to share with you guys.
I'll add a few more info soon
Click to expand...
Click to collapse
Hi Lucas. How about flashing from APC3 straight to Taiwan MM ROM. Without downgrading to Taiwan 5.1.1 ROM. Would that trip KNOX?
Thanks in advance

chinghao said:
can i flash this mm rom into malaysia XME version note 5?
Click to expand...
Click to collapse
mtsingson said:
Hi Lucas. How about flashing from APC3 straight to Taiwan MM ROM. Without downgrading to Taiwan 5.1.1 ROM. Would that trip KNOX?
Thanks in advance
Click to expand...
Click to collapse
No Guys you cannot flash Taiwan Rom into different region phones. They have different bootloaders and would simply fail to work. You'll end up with knox tripped devices with the same firmware as you had. Don't try it!

Lucas Eugene said:
No Guys you cannot flash Taiwan Rom into different region phones. They have different bootloaders and would simply fail to work. You'll end up with knox tripped devices with the same firmware as you had. Don't try it!
Click to expand...
Click to collapse
+1
Happened to me already
But Samsung seem to have fixed the Deep Sleep issue with MM.

Does this mean that following this CASE-1 will not trip the power drain issue for previously rooted device?

Hi there ! Will it restore or clear data if we update as mention above ?

Dead Phone :/

I have samsung Galaxy S4 ( I9500 )
i have installed cm-12.1-20160918-NIGHTLY-i9500.zip With philz_touch_6.48.4-i9500 and it worked Well but there was a problem i call I can't here or the other here me unless open speaker and close it again it works well .. then i got OTA update i started to download it with CMUpdater and download speed wasn't well i canceled the download and Downloaded ( cm-12.1-20161002-NIGHTLY-i9500.zip ) manually and Flash it with the same Recovery after this flash process my phone started normally but when i Lock the screen and try to wake it up again it won't wake up but the device still working :/ .. and other problem is Back, menu Keys didn't work any more After this flash .. and Recovery Won't Boot :/ tried to change ( CWM - Phliz ) it and nothing happen .. TWRP is the only recovery Work But other problem still .. and i flash Stock Rom With ODIN and Problems Still i flash Kit kat and Lolipop .. nothing help :"3 ..
any help ??

ahmed44251 said:
I have samsung Galaxy S4 ( I9500 )
i have installed cm-12.1-20160918-NIGHTLY-i9500.zip With philz_touch_6.48.4-i9500 and it worked Well but there was a problem i call I can't here or the other here me unless open speaker and close it again it works well .. then i got OTA update i started to download it with CMUpdater and download speed wasn't well i canceled the download and Downloaded ( cm-12.1-20161002-NIGHTLY-i9500.zip ) manually and Flash it with the same Recovery after this flash process my phone started normally but when i Lock the screen and try to wake it up again it won't wake up but the device still working :/ .. and other problem is Back, menu Keys didn't work any more After this flash .. and Recovery Won't Boot :/ tried to change ( CWM - Phliz ) it and nothing happen .. TWRP is the only recovery Work But other problem still .. and i flash Stock Rom With ODIN and Problems Still i flash Kit kat and Lolipop .. nothing help :"3 ..
any help ??
Click to expand...
Click to collapse
Get the i9500 lollipop firmware from the sammobile and flash it via odin. Please get the firmware which is the same or newer then your bootloader.

sway8966 said:
Get the i9500 lollipop firmware from the sammobile and flash it via odin. Please get the firmware which is the same or newer then your bootloader.
Click to expand...
Click to collapse
i flashed it several times before and worked well .. but now i don't know what's happening

sway8966 said:
Get the i9500 lollipop firmware from the sammobile and flash it via odin. Please get the firmware which is the same or newer then your bootloader.
Click to expand...
Click to collapse
tell me how to know My Device Bootloader

ahmed44251 said:
tell me how to know My Device Bootloader
Click to expand...
Click to collapse
Just install phone info app from play store

Arpit Aggarwal said:
Just install phone info app from play store
Click to expand...
Click to collapse
it said the same bootloader in version i flash .. can i know the original or some thing like this ?

ahmed44251 said:
it said the same bootloader in version i flash .. can i know the original or some thing like this ?
Click to expand...
Click to collapse
When I was in kitkat I did not check the bootloader version and flashed older version which tripped the knox counter. That was why I I asked you to check the bootloader .
If you flashed the correct firmware via odin, believe that the firmware download has no problem, and flashing odin did not give any errors and yet you still have some problem, then your problem likely to be a hardware failure rather than software.
check the checksum of the downloaded firmware, flashing from different usb port or different computer, flashing with different version of odin, etc.. are the tries you can do.

sway8966 said:
When I was in kitkat I did not check the bootloader version and flashed older version which tripped the knox counter. That was why I I asked you to check the bootloader .
If you flashed the correct firmware via odin, believe that the firmware download has no problem, and flashing odin did not give any errors and yet you still have some problem, then your problem likely to be a hardware failure rather than software.
check the checksum of the downloaded firmware, flashing from different usb port or different computer, flashing with different version of odin, etc.. are the tries you can do.
Click to expand...
Click to collapse
i'll try
i downloaded Jelly bean, Kitkat and i'll flash each

Nothing Worked it still same things

ahmed44251 said:
i'll try
i downloaded Jelly bean, Kitkat and i'll flash each
Click to expand...
Click to collapse
Could you tell me your bootloader version of your phone and also give me the link of the lollipop firmware that you downloaded from the sammobile.
if it is possible could you tell me what message you have when you flash that lollipop firmware via odin.
If your phone is on lollipop, flashing kit-kat or jelly beam wont help and it could harm your phone.

sway8966 said:
Could you tell me your bootloader version of your phone and also give me the link of the lollipop firmware that you downloaded from the sammobile.
if it is possible could you tell me what message you have when you flash that lollipop firmware via odin.
If your phone is on lollipop, flashing kit-kat or jelly beam wont help and it could harm your phone.
Click to expand...
Click to collapse
bootloader Version : I9500XXUHPH3
Frimware link : http://www.sammobile.com/firmwares/download/93065/I9500XXUHPH3_I9500SERHPH1_SER/
Odin didn't Gave me any Error Messages .. it work Like charm
Kitkat Solve Original Recovery Problem .. and two other problems still ...but lollipop all 3 still

Could 4Files Firmware Help ??

ahmed44251 said:
bootloader Version : I9500XXUHPH3
Frimware link : http://www.sammobile.com/firmwares/download/93065/I9500XXUHPH3_I9500SERHPH1_SER/
Odin didn't Gave me any Error Messages .. it work Like charm
Kitkat Solve Original Recovery Problem .. and two other problems still ...but lollipop all 3 still
Click to expand...
Click to collapse
Well ph1/ph3 is the latest firmware for i9500 . It was released a week ago. It is for Russia. I am using the firmware released in 2015. Try to download it again and flash it.

4 files Frimware and I9500XXUHPH3 Didn't help :/
this maybe Hardware problem (board .. )