Database Users

How to cardflash with hareld?

Hi
does anyone know how in need to call the "ARTEIMG.nbh" with the hareld when I am using this manual:?
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Empty (erase the contents) of your microSD card from the Windows Mobile file explorer or format it from your computer using a card reader (in some cases format doesn't work).(not necessary, do it only if 1st attemt fails)
Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract.
Rename the .NBH file to ARTEIMG.nbh and copy it to the root folder of your microSD card.
With microSD card inserted on the phone, start the bootloader (The bootloader is invoked by pressing down the Record button and using the stylus at the same time to press the RESET button at the left side).
You should see the screen pictured on the left, confirm flashing on screen by pressing the volume slider down.
Flashing might hang after some time but this is normal. Just wait. Complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts.
SuperCID devices are able to flash any NBH image using this method.
Click to expand...
Click to collapse

some few more question
witch of these files do I need to give the name???
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

does nobody has experience with this???
I really need to do this so I can send it to repair...

haha problem solved.
In someway my phone was able to connect with my pc with a broken usb. haha
In bootloader mode it just worked

Why do you want to update your rom this way?
It is much easilier with the HARD-SPL or USPL.
Look a bit around the herald forum and you will find these methods!!!

Yes I know but my usb connection in my phone broke down, so i need to send it to repair.
But i had the touchit rom on it, so with that rom I didnt had any garantee

Official Firmware Stock T525XXUANAF - Android 4.4.2 - Galaxy TabPRO 10.1 LTE SM-T525

Official Firmware Stock T525XXUANAF
Samsung Galaxy TabPRO 10.1 LTE (SM-T525) - Android 4.4.2 KitKat​
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Download Link : T525XXUANAF - Mirror
Features:
Model : SM-T525
Android Version : 4.4.2
Firmware : T525XXUANAF
Country / region code : Italy / ITV
Release Date : 22/01/2014
REQUIREMENT :
• Have the USB drivers installed on your computer.
• Having Odin307.zip software. Extract this file to obtain the Odin3 v3.07.exe file.
• Unzip the downloaded firmware.
• Cut antivirus protections and close Samsung Kies process.
• Having a charged battery more than 70%.
• Reminder : make a backup of your data as a precaution !
INSTALLATION :
Turn off your tablet.
Launch the Odin3_v3.07.exe file in the unzipped folder.
Make sure you have only Auto Reboot and F. Reset Time ticked.
Select the files in the rom unzipped as follows :
- Code in PDA
- Csc in CSC
- Modem in PHONE
In the case of a single file .tar ou .tar.md5, select it in PDA.
On your tablet, press both buttons Volume Down + Home + Power and Volume UP to restart your tablet download.
Connect the tablet to the computer using the original USB cable. The box below ID: COM should be colored.
You should find the Odin window like this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click Start to begin the installation.
Wait for the setup and do not touch anything. Your tablet will reboot.

Great Job man!! :laugh:
I'm looking for the firmware of LTE 12.2" version, do you know where can I get it?
Thank you very much!

Hi
U can find on sammobile
Envoyé de mon GT-I9305 en utilisant Tapatalk

New Guide to go back to stock KDZ based

Ok. guys follow these steps and do not miss any
Download the files 1. here & 2. here
Credits to hyelton and somboons
1. Install R&D tool B2CAppSetup.exe (close it if it opens) also install the LG mobile drivers.
2. Delete the existing files and folders in C:\ProgramData\LGMOBILEAX
Copy over the files from downloaded LGMOBILEAX to same directory in C:\ProgramData\LGMOBILEAX
(It is hidden so make sure to enable hidden items in windows)
3. Take ownership of hosts file located in C:\Windows\System32\drivers\etc\
Google it if you don't know.
4. Run http file in shttps folder (As Administrator)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Run this
6. Click Ok
7. Click Ok again
8. Take a look at system tray
9. Click the three window icon and turn it on
10. Click ok
11. Accept UAC prompt to run the flashtool as administrator.
12. Your small server should look like the one in the window to left and follow the steps in picture after selecting the appropriate kdz file
13. Great success.
14. If you had not wiped data to "clean install a new rom" on Philz touch recovery, you have to factory reset your phone after flashing stock firmware or else it will go in bootloop.
Important:
1. You need to take control of hosts file (Google the steps if you are noob)
2. Copy over files and folders from downloaded LGMOBILEAX folder. It is hidden so make sure to enable hidden items in windows.
3. Follow the above guide step by step. You miss 1 step and it will not work.
4. Hosts file will revert back to default after the flash tool is closed.

LG Leon LTE Root Method EASY! [MetroPCS Only]

[Read before proceeding]
This root method will only work on MetroPCS version of the LG Leon! Do test other devices at your own risk[not held liable]
Requirements:
Android Version: 5.1.1 *not so sure for eairler versions of Lollipop*
Software Version: MS34510f and Under
Enough space for app extraction [About 50MB]
Like always, before modifying the system MAKE A BACKUP!
I WILL NOT BE HELD RESPONSIBLE IF ANYTHING GOES WRONG WITH YOUR DEVICE! PROCEED WITH CAUTION!
Hello guys,
By far, for me this is one of the most simplest ways of rooting this phone. Lets get started
BTW All Downloads Below
1. Download KingRoot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Extract ZIP package with app desired or use a desktop, then place files onto phone
3. install the APK, and ignore any warning pop-ups
4.Open the app upon completion of app
5. You will be presented with the main screen saying no root avaliable, CLICK ON TRY TO ROOT
6. App will now start executing root
*May be slow so give it time
*Make sure to allow blocked apps if presented with a pop-up
7.If all went well you will be presented with a ROOT SUCCESSFUL screen OR phone will restart and you will have root
***At this point DO NOT request or run any apps that require root until the device is restarted.
8. Enjoy Root!
-If root is not accessible upon restarting, go into KingUser Su and click on REPAIR ROOT
-I do not know how to replace KingUser with SuperSU Sorry!
Goodluck!
Proof:
KingRoot APK: https://drive.google.com/file/d/0B9y1pDvJBE4nVk4wYlhCNjc4UkE/view?usp=sharing
KDZ Firmware MS34510f(METROPCS ONLY) : https://drive.google.com/file/d/0B9y1pDvJBE4nTEFFLXFraDgxOTg/view?usp=sharing
Firmware can be used for recovery purposes, a backup, and here for convinience!

Please help me for apgrade or root 8227L_demo

Hello my friends. I have an android hand unit like the one on the link.
https://www.aliexpress.com/item/33035372080.html?spm=a2g0s.9042311.0.0.25a64c4dPPWPHj
I need to do firmware update οr to rout this HU.
Here's a difference in the model's name... The factory information is different from the CPU-Z information.
The seller of course does not help. He forcefully responds to messages and does not understand.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I only ask you 2 things.....Do a firmware upgrade or root the device.
The main problem is the radio application. While I have English as my primary language, the radio only holds Polish and does not have a good signal.
Please Help me

any help?

Look for this instruction in 4pda.ru forum https://4pda.ru/forum/index.php?showtopic=936535&st=11880
Easy! For some reason, it is not described in detail and simply here.
I will try:
- download our scatter file to the computer (laptop);
- Download FlashTool with SP_Driver_v2.0 (firewood) and install on the computer (laptop);
- Download SuperSU.zip and throw in the root of the body;
- Download Android Terminal and install on the body;
- Download also TWRP, this one came up to me, the rest mirrors;
- rename TWRP to recovery.img - this is important!
- we throw recovery.img next to our scatter file;
- open FlashTool, load our scatter file, see that the checkmark is only on recovery! ;
- further according to the scheme as described on the forum - click Download, connect the switched off body and wait for success!
Success will be, of course, if the firewood is already standing and the dad-dad cord is whole.
- Now you need to reboot into recovery. to do this, turn on the body, launch Android Terminal, give the reboot recovery command;
- from TWRP we put zip SuperSU;
- ALL! We reboot and rejoice.
I hope it turned out simple and clear. Good luck!
Click to expand...
Click to collapse

Can I switch to a different luacher or operating system?