Hey guys. Ive had a note 3 before in the past and have used the Root DelaVega to root successfully. This was early in the year. I sold my old note 3 for an HTC One. Well today i traded my HTC One back for a note 3 as i missed the Note 3. As soon as i came home i attempted to use the Root DelaVega method to foot (just like i did before) and immediately it failed.
I have been stuck on a screen saying "firmware update encountered an issue - select recovery in Kies" so i tried Kies 3.2 however it says my device is not compatible. Come to find out after doing research (talking to the original owner i traded my HTC One for) the Note 3 i have is on the latest version of KitKat 4.4.2 that is not compatible with the Root DelaVega method or any root method - so i screwed that up. I can successfully boot in and out of download mode. Ive tried to flash N900XXUDNA6 4.4.2 in Odin several times, it begins then fails almost immediately and the bar on the phone itself (in download mode) begins then freezes shortly after beginning. Ive also tried to flash N900XXUDNC1 JellyBean thru odin and get the same results - almost immediately fail and the blue status bar on the phone freezes when it barley begins. What else can i do??? am i totally screwed? Ive been researching and trying to fix this for 6 straight hours now! My gf is about to kill me for being online so long Is there anything i can do at this point? Am i stuck.
Do you know what Region the phone was originally? I had a similar issue and I had to get the Hong Kong (in my case) version of a stock ROM and flash that to get things working again. Not all partitions are the same - you might need a PIT file to match your original region and then flash the ROM.
What info do you get in DL mode?
Journyman16 said:
Do you know what Region the phone was originally? I had a similar issue and I had to get the Hong Kong (in my case) version of a stock ROM and flash that to get things working again. Not all partitions are the same - you might need a PIT file to match your original region and then flash the ROM.
What info do you get in DL mode?
Click to expand...
Click to collapse
Yes the phone is for AT&T so it's US. When I go into DL mode Knox counter is still 0x0. Is there a certain firmware I need then to match with the AT&T model? Or a pit?
jthornton71707 said:
Yes the phone is for AT&T so it's US. When I go into DL mode Knox counter is still 0x0. Is there a certain firmware I need then to match with the AT&T model? Or a pit?
Click to expand...
Click to collapse
Go to Sammobile and see if you can find the version you had, sounds like an older JB if kingo app didn't trip Knox. Reflash that using ODIN.
I don't know if there was a problem with American bootloader, see if there's an AT&T Note 3 forum. Might find answers there...
jthornton71707 said:
Hey guys. Ive had a note 3 before in the past and have used the Root DelaVega to root successfully. This was early in the year. I sold my old note 3 for an HTC One. Well today i traded my HTC One back for a note 3 as i missed the Note 3. As soon as i came home i attempted to use the Root DelaVega method to foot (just like i did before) and immediately it failed.
I have been stuck on a screen saying "firmware update encountered an issue - select recovery in Kies" so i tried Kies 3.2 however it says my device is not compatible. Come to find out after doing research (talking to the original owner i traded my HTC One for) the Note 3 i have is on the latest version of KitKat 4.4.2 that is not compatible with the Root DelaVega method or any root method - so i screwed that up. I can successfully boot in and out of download mode. Ive tried to flash N900XXUDNA6 4.4.2 in Odin several times, it begins then fails almost immediately and the bar on the phone itself (in download mode) begins then freezes shortly after beginning. Ive also tried to flash N900XXUDNC1 JellyBean thru odin and get the same results - almost immediately fail and the blue status bar on the phone freezes when it barley begins. What else can i do??? am i totally screwed? Ive been researching and trying to fix this for 6 straight hours now! My gf is about to kill me for being online so long Is there anything i can do at this point? Am i stuck.
Click to expand...
Click to collapse
Hi mate,
if you are stuck, maybe you can try this.
http://forum.xda-developers.com/show....php?t=2701062
it's a way to unbrick your software.
and if the older owner of your N3 said it's on the latest firmware of kitkat.
maybe your problem is the firmware in the sammobile were before the firmware you have install on your device via OTA update.
Yours firmware came throw out via OTA update and with some reason you can't see any latest firmware USA N900A in sammobile.
try the method in the link and reply if you have been successful.
cumps
Ik Knox is 0×0,then u can try samsung service centre ?
Sent from my SM-N900 using XDA Premium 4 mobile app
Related
Hi guys! I hope someone could help me. I just bought a Galaxy Note 3 (international version) yesterday. The phone's fine. It's just that I am unable to update. I am able to download it but when my phone reboots it shows a dead android with a red triangle on its chest. I read flashing the firmware via odin can fix it but problem is our internet is hella slow. I couldn't even complete downloading my brother's Note 2 firmware. Any way I can make it install the firmware successfully? By the way it's OTA. I am able to download the update, just won't let me finish installing it. Goes around 35% then the android on the black screen dies with a red triangle on its chest.
EDIT:
I have official firmware, never rooted, just got it yesterday. Still factory new.
version 4.3, build # JSS15J.N9005ZHUBMI7, baseband version N9005XXUBMI5, Kernel version 3.4.0-1626679
Have you tried reseting your phone go into recovery mode factory reset
Mygadgetgeek.com
mygadgetgeek.com said:
Have you tried reseting your phone go into recovery mode factory reset
Mygadgetgeek.com
Click to expand...
Click to collapse
not yet, but i have a lot of data now on my phone. will try that though. in case that doesn't work, any other advice?
cptnappy said:
Hi guys! I hope someone could help me. I just bought a Galaxy Note 3 (international version) yesterday. The phone's fine. It's just that I am unable to update. I am able to download it but when my phone reboots it shows a dead android with a red triangle on its chest. I read flashing the firmware via odin can fix it but problem is our internet is hella slow. I couldn't even complete downloading my brother's Note 2 firmware. Any way I can make it install the firmware successfully? By the way it's OTA. I am able to download the update, just won't let me finish installing it. Goes around 35% then the android on the black screen dies with a red triangle on its chest.
EDIT:
I have official firmware, never rooted, just got it yesterday. Still factory new.
version 4.3, build # JSS15J.N9005ZHUBMI7, baseband version N9005XXUBMI5, Kernel version 3.4.0-1626679
Click to expand...
Click to collapse
Was your phone brand new? And did you check your KNOX status? -- reason I ask, after you've rooted a phone you are unable to recieve OTA updates, unless you use Wanam to fake system status, then you can download the OTA update but it stalls on the install about 35% or so in..
Best advice, is grab the stock image from sammobile (ballache to download I know) then use ODIN to flash her back to original state.
radicalisto said:
Was your phone brand new? And did you check your KNOX status? -- reason I ask, after you've rooted a phone you are unable to recieve OTA updates, unless you use Wanam to fake system status, then you can download the OTA update but it stalls on the install about 35% or so in..
Best advice, is grab the stock image from sammobile (ballache to download I know) then use ODIN to flash her back to original state.
Click to expand...
Click to collapse
i didn't root the phone when i got it. it's fresh and on official firmware. have no idea about KNOX, that's new to me. if it helps, my device status says "official"
unfortunately the internet in my area is very slow, i couldn't download firmwares from sammobile. i tried several times
cptnappy said:
i didn't root the phone when i got it. it's fresh and on official firmware. have no idea about KNOX, that's new to me. if it helps, my device status says "official"
unfortunately the internet in my area is very slow, i couldn't download firmwares from sammobile. i tried several times
Click to expand...
Click to collapse
Ah Ok, if it says Official it should be good to go. Seems like maybe the download has gotten corrupt due to an intermittent internet connection.
cptnappy said:
i didn't root the phone when i got it. it's fresh and on official firmware. have no idea about KNOX, that's new to me. if it helps, my device status says "official"
unfortunately the internet in my area is very slow, i couldn't download firmwares from sammobile. i tried several times
Click to expand...
Click to collapse
OK, then maybe you should learn a few things before trying to update - Knox is a security system in latest Samsung phones that is supposed to be triggered/set when you root (or install any custom kernel/recovery). Your initial (old) firmware could still let you root without triggering the Knox flag, and then you can update to the latest firmware for your region using Mobile Odin Pro and still keep your root AND without triggering the Knox flag. However once you update using Samsung OTA / Odin / Kies to a firmware more recent than MJ3 you can no longer root without also triggering your Knox warrany flag - read more about this in the Universal Root De La Vega thread!
i gave up after several tries, since i'm on 4.3 i think that would do for now. maybe it's just downloading a stability update or something? everytime i do an OTA update, it tells me that the download of the new firmware is complete then reboot. when i get to 32% the droid falls flat on its back and shows the red triangle on its chest, over and over. i don't lose my phone data or anything. just won't update. i'll wait for 4.4 Kitkat instead. hope i'll be able to update to that when it comes out.
EDIT: i tried going into recovery mode, wiping cache, and factory reset.. still no dice. maybe Odin's the only way i guess. problem is my internet connection lol
@cptnappy - i also have the same problem...got my note3 n9005 a week ago and I also have the same problem as you....error at 30+%
tried update thru Kies with no luck...same error appears
Sent3 said:
@cptnappy - i also have the same problem...got my note3 n9005 a week ago and I also have the same problem as you....error at 30+%
tried update thru Kies with no luck...same error appears
Click to expand...
Click to collapse
i managed to update mine using Samsung Kies3 (not Kies, but Kies3). Hope updating OTA is fixed in the future with the update i just did
Hey guys, so I have a note 3 n9005,which i had rooted previously. This morning, I tried to flash the new touchwiz kitkat firmware via Odin and failed. Now the phone wouldn't boot up, but I an able to make it into the download mode. I have tried flashing several firmwares but neither of them works, I also had cm11 installed, so odpnt know f the bootloader has been updated or not...
So of anybody could please help me with this, that would be greatly appreciated
i have excatly the same problem tried to update s9005 via odin hong kong version to german 4.4.2 and now wont boot, odin fails only 20 seconds in read so many threads would also like to see some solutions to op.
CaptaiinCaveman said:
Hey guys, so I have a note 3 n9005,which i had rooted previously. This morning, I tried to flash the new touchwiz kitkat firmware via Odin and failed. Now the phone wouldn't boot up, but I an able to make it into the download mode. I have tried flashing several firmwares but neither of them works, I also had cm11 installed, so odpnt know f the bootloader has been updated or not...
So of anybody could please help me with this, that would be greatly appreciated
Click to expand...
Click to collapse
You also need to add some of the stuff it is written in download mode and the log in Odin when in fails. If you went to 4.4.2 on N9005 you can not return to 4.3 (which you should have read by now, there are only 200 posts in 50 threads about it). What kind of N9005 was yours (16/32/64GB), what region/CSC?
xclub_101 said:
You also need to add some of the stuff it is written in download mode and the log in Odin when in fails. If you went to 4.4.2 on N9005 you can not return to 4.3 (which you should have read by now, there are only 200 posts in 50 threads about it). What kind of N9005 was yours (16/32/64GB), what region/CSC?
Click to expand...
Click to collapse
I flashed the DBT FW again with this pit file created by HSDPilot http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77.
It worked and lash was complete now however i am stuck in SAMSUNG logo after restart.
ANy help?
solution
newapostlenew said:
I flashed the DBT FW again with this pit file created by HSDPilot http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77.
It worked and lash was complete now however i am stuck in SAMSUNG logo after restart.
ANy help?
Click to expand...
Click to collapse
hi i followed your instructions afte having the same problem.
once it was flashed and at the samsung logo
i took battery out, replaced it and started phone in recovery mode. go to wipe factory reset
then reboot
mine worked and is ok .
CaptaiinCaveman said:
Hey guys, so I have a note 3 n9005,which i had rooted previously. This morning, I tried to flash the new touchwiz kitkat firmware via Odin and failed. Now the phone wouldn't boot up, but I an able to make it into the download mode. I have tried flashing several firmwares but neither of them works, I also had cm11 installed, so odpnt know f the bootloader has been updated or not...
So of anybody could please help me with this, that would be greatly appreciated
Click to expand...
Click to collapse
darkman13 said:
i have excatly the same problem tried to update s9005 via odin hong kong version to german 4.4.2 and now wont boot, odin fails only 20 seconds in read so many threads would also like to see some solutions to op.
Click to expand...
Click to collapse
Do either of you have a 16 GB version?
Hi All,
My problem :
I wanted to install the official kitkat rom but I made a big mystake : I took N900 files instead of N9005...
After that I successfully installed the right bootloader and CWM.
I installed some cuustom roms but the setupwizard crash at the last step
I tried to flash the complete official 4.4.2 rom but odin failed with message on the phone : "ODIN : invalid ext4 image"
Anybody has any idea to help me ?
hi guys i manage to fix it, well mine anyway worked by flashing the pit i found on xda and selecting repartion on odin 3.7 along with german 4.4.2 to my n9005 from Hong Kong, re booted and done a factory reset via volume button also wiped cache and re started and it came back alive on the selected german rom 4.4.2. hope it hels others. ps my note 3 was from hong kong n9005 32gb
xclub_101 said:
You also need to add some of the stuff it is written in download mode and the log in Odin when in fails. If you went to 4.4.2 on N9005 you can not return to 4.3 (which you should have read by now, there are only 200 posts in 50 threads about it). What kind of N9005 was yours (16/32/64GB), what region/CSC?
Click to expand...
Click to collapse
hey, i wasnt trying to downgrade, i was going from cm11 to official 4.4.2. i've got a 32gb model from france i believe (the box has french written all over it so do the manuals)
newapostlenew said:
I flashed the DBT FW again with this pit file created by HSDPilot http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77.
It worked and lash was complete now however i am stuck in SAMSUNG logo after restart.
ANy help?
Click to expand...
Click to collapse
dude, you are god thank you so much for that, working perfect now
xclub_101 said:
You also need to add some of the stuff it is written in download mode and the log in Odin when in fails. If you went to 4.4.2 on N9005 you can not return to 4.3 (which you should have read by now, there are only 200 posts in 50 threads about it). What kind of N9005 was yours (16/32/64GB), what region/CSC?
Click to expand...
Click to collapse
After installing DBT NB4 FW ( or with Polish NB3 FW) my LTE speeds become almost 0.
I tried multiple installs.
Any guidance?
Quick tip: Uninstall KIES.
Kies is like a big brother.
Use ODIN 1.85 and tick update phone bootloader. That's how I fixed mine. The other versions of Odin wouldn't let me update bootloader.
Of course, before you do this Flash/wipe data in recovery mode.
But uninstalling KIES solved my issue.
Sent from my SM-N9005 using Tapatalk
Hello guys,
I tried to root my SM-N900 this morning. I've root my Note 2 before and i thought it would just be the same. Unfortunately as i am starting to root with Odin, i've waited for hours but Odin is still not done with the phone and the download bar progression thing didnt move an inch. So with regret i turned off the phone and now it is stuck on "firmware upgrade encountered an issue" screen. I tried to download firmwares from sammobile but failed at 99% with a message of Unknown Network Error. So with that, are there any other solution possible? I've also tried Kies, but it wouldnt recognize my phone..
@bluws just download any stock firmware for your phone and flash it later with Odin. Use Odin 3.04 or 3.07 if 3.09 failed.
tetakpatalked from Nexus 7 flo
Make sure you are using correct Ver of root, make sure kies not running in bag round when you flash threw Odin, take care of antivirus
Sent from my SM-N9005
bluws said:
Hello guys,
I tried to root my SM-N900 this morning. I've root my Note 2 before and i thought it would just be the same. Unfortunately as i am starting to root with Odin, i've waited for hours but Odin is still not done with the phone and the download bar progression thing didnt move an inch. So with regret i turned off the phone and now it is stuck on "firmware upgrade encountered an issue" screen. I tried to download firmwares from sammobile but failed at 99% with a message of Unknown Network Error. So with that, are there any other solution possible? I've also tried Kies, but it wouldnt recognize my phone..
Click to expand...
Click to collapse
Try to connect your phone from the KIES program in a mode of emergency restoration of firmware by Model phone type and Serial Number of the phone. This may take several hours. To do this, you need a good internet.
bluws said:
Hello guys,
I tried to root my SM-N900 this morning. I've root my Note 2 before and i thought it would just be the same. Unfortunately as i am starting to root with Odin, i've waited for hours but Odin is still not done with the phone and the download bar progression thing didnt move an inch. So with regret i turned off the phone and now it is stuck on "firmware upgrade encountered an issue" screen. I tried to download firmwares from sammobile but failed at 99% with a message of Unknown Network Error. So with that, are there any other solution possible? I've also tried Kies, but it wouldnt recognize my phone..
Click to expand...
Click to collapse
Did you previously disable Knox? If you didn't, that can cause random problems, read about it in the newest Chainfire's thread in recent post:
http://forum.xda-developers.com/showthread.php?p=55325329
What kind of root process did you use Odin for?
tetakpatalked from Nexus 7 flo
Ty guys i got it working just by flashing a new stock rom. Tho now i am unable to call (no mobile services). Apparently it says that there are no sim card or something like that, does the region of the firmware i downloaded have something to do with it. Im living in indonesia (xse) but downloaded the russian stock i think.
bluws said:
Ty guys i got it working just by flashing a new stock rom. Tho now i am unable to call (no mobile services). Apparently it says that there are no sim card or something like that, does the region of the firmware i downloaded have something to do with it. Im living in indonesia (xse) but downloaded the russian stock i think.
Click to expand...
Click to collapse
Good it works again now!
Maybe it is just a baseband problem? I'm sure you will find an asian baseband only and be able to flash it.
Is your IMEI number still there? If yes, make sure to create backup of it now.
tetakpatalked from Nexus 7 flo
Hi everyone,
This is my first post and I hope that I am in the right section.
As per info in the thread title, I have a Malaysian Samsung Galaxy Note 3 updated to the last available firmware 4.4.2
I am trying to flash Lollipop with Odin (i followed all the instructions in the guide, literally step by step).
I have tried with the italian Lollipop update branded Vodafone, but Odin always failed and the phone was soft bricked.
I have reinstalled the original malaysian firmware 4.4.2 that i had prior this attempt. phone booted ok and worked perfectly fine.
Then i downloaded the lollipop firmware from poland, this thime odin completed the process and gives me a pass. but the phone goes in boot loop (samsung logo at booting never goes away). I have tried to reboot in recovery mode and wipe the cache. but still boot loop.
Would anyone be so kind to explain what i am doing wrong and how i could install lollipop on my malaysian galaxy note 3?
Any help would be much appreciated.
Luc81
Wipe all before flash lollipop.
Joku1981 said:
Wipe all before flash lollipop.
Click to expand...
Click to collapse
Thanks,
actually I have just managed to flash it correctly about 1 hour ago. i didn't need to wipe my data. Now it works properly.
Thanks anyway for your help!
hows your experience ?
just let us know what was the mistek, so others wont have to ask the same question again ...hehehe
all the best!
note 3 lolipop(Malaysia) N9005
Guys good news because this morning when I was checking my software update ... Thru Ota is about 860mb and thru keis 3 is about 1.3gb. Took me couple hours to download and about 1hour ++ to install. Booting up took some time and luckily everything is working fine for the time being.
Anyone updated and how's the battery draining issue.
i try update my note3 using kies3, it confirmed lollipop 5.0 available to update, but unfortunately my note3 repeatedly crash during upgrade and window on kies top up said "PC cant recognized my phone". Maybe cause of my knox warranty void 0x1 (trip). i hack on local C:\Users\YOUR NAME\AppData\Local\Temp and get copy of *.zip files (N9005DXUGBOD1_N9005OLBGBOD1_HOME.zip). It was lollipop firmware version for malaysia. Upgrade it using Odin and succesfull installed.
Lolipop
I was having the same issue while updating thru keis. So I downloaded it thru OTA. Battery sucks after lolipop. If you are facing any issue just send me a mail
So this is a bit of an odd situation my friend is having. He bought his Note 4 off eBay over a year ago, and it was (and still is) a rooted mess. And I mean a big mess. Now I'm trying to help him fix it, because he can't update his phone at all whatsoever from 5.1.1. So I send him 6.0.1 firmware for O2U and have him go into Download mode, odin, all that fun stuff. Download mode says SM-N910T. Settings says SM-N910F. Anyway, he tries flashing the firmware via odin, fails, I have him try multiple things (I'm pretty tech savvy when it comes to this type of stuff) but it always failed. Also, "Current Binary" and "System Status" are both custom, and the KNOX counter is 0x1.
So what I'm asking is, how to fix this problem for him? What steps should he take (or should I help him take)? Is this actually a T-Mobile phone from the USA, but rooted to work with O2 sim cards? The hell is going on here?
Thanks for any replies, and all suggestions will be taken seriously and addressed.
Install the Phone INFO Samsung APK by vndnguyen and see what it's written there.
Get the serial number - example: mine is a 910C with serial RF8H70D.... and so on (obviously I can't write it all here)
With this serial number try with Samsung Smart Switch on the PC and see what info you get. Also you have the possibility to get the latest original firmware installed on the phone.
Good luck.
Gunshots911 said:
So this is a bit of an odd situation my friend is having. He bought his Note 4 off eBay over a year ago, and it was (and still is) a rooted mess. And I mean a big mess. Now I'm trying to help him fix it, because he can't update his phone at all whatsoever from 5.1.1. So I send him 6.0.1 firmware for O2U and have him go into Download mode, odin, all that fun stuff. Download mode says SM-N910T. Settings says SM-N910F. Anyway, he tries flashing the firmware via odin, fails, I have him try multiple things (I'm pretty tech savvy when it comes to this type of stuff) but it always failed. Also, "Current Binary" and "System Status" are both custom, and the KNOX counter is 0x1.
So what I'm asking is, how to fix this problem for him? What steps should he take (or should I help him take)? Is this actually a T-Mobile phone from the USA, but rooted to work with O2 sim cards? The hell is going on here?
Thanks for any replies, and all suggestions will be taken seriously and addressed.
Click to expand...
Click to collapse
Looks like its an refurbished note 4 original motherboard is N910T and faked with N910F software cuz N910F has more value in Market.
So the bottom line is you have N910T Tmobile note 4 and you have to flash N910T firmware but after flash firmware from odin you have to immediately boot into stock recovery by pressing 3 button combo and do factory reset to get clean fresh opreating system otherwise it will get stuck in a bootloop at samsung logo.
First boot after flash and factory reset can take upto 10 minutes.
You can get firmware from www.sammobiles.com/firmwares
Or from link below for faster download.
https://androidfilehost.com/?fid=890129502657581810
Remember once you flash this latest marshmalow firmware there is no way you can ever downgrade to 5.1.1 again.
Good luck
Trex888 said:
Looks like its an refurbished note 4 original motherboard is N910T and faked with N910F software cuz N910F has more value in Market.
So the bottom line is you have N910T Tmobile note 4 and you have to flash N910T firmware but after flash firmware from odin you have to immediately boot into stock recovery by pressing 3 button combo and do factory reset to get clean fresh opreating system otherwise it will get stuck in a bootloop at samsung logo.
First boot after flash and factory reset can take upto 10 minutes.
You can get firmware from www.sammobiles.com/firmwares
Or from link below for faster download.
https://androidfilehost.com/?fid=890129502657581810
Remember once you flash this latest marshmalow firmware there is no way you can ever downgrade to 5.1.1 again.
Good luck
Click to expand...
Click to collapse
Thanks so much! Everything is flashing on his phone right now like it should be. Appreciate it a bunch!
I also used samsung-firmware.org. I would use sammobile but I only had enough on my card for a 48 hour upgrade.