I've been putting it off for a while. I'm flashed to cwm and still on TouchWiz. Is there a particular method to doing this system update? I want to get on kitkat and keep my root, or at least be able to get root access again afterwards.
Goes look in development section. .unknown has a stock rooted...random has a stock unrooted that's easy to root
Sent from my SPH-L720 using Tapatalk
ibcenu said:
Goes look in development section. .unknown has a stock rooted...random has a stock unrooted that's easy to root
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
I don't know what this means, in particular. Can you link me to something? I ran cyanogenmod up to 11 when my s3 died and have been out of the community for a bit. I just want to put the OTA kitkat update onto my phone and then get root.
nickgenova said:
I've been putting it off for a while. I'm flashed to cwm and still on TouchWiz. Is there a particular method to doing this system update? I want to get on kitkat and keep my root, or at least be able to get root access again afterwards.
Click to expand...
Click to collapse
You can get on kitkat if you flash a kitkat rom or by odining stock NAE tar file (Please note that this will give you knox bootloader). If you visit Sacs Custom Rom 4.4.2 kitkat rom (link in my signature below). It will explain how to go from a previous version to his kitkat rom.
Basically, in a nutshell...you need to have the NAE modem (which is explained in the thread) and specific recoveries to use during flashing. Visit the thread to find out more
Related
I have a L720 running the MK2 4.3 Stock(ish) and the PhilZ Touch ver 6. I want to remove all of these and reinstall the stock MK2 in advance of the new kitkat release. How do I remove all of these before reloading the stock MK2?
[email protected] said:
I have a L720 running the MK2 4.3 Stock(ish) and the PhilZ Touch ver 6. I want to remove all of these and reinstall the stock MK2 in advance of the new kitkat release. How do I remove all of these before reloading the stock MK2?
Click to expand...
Click to collapse
Flash the stock MK2 file found here: http://forum.xda-developers.com/showthread.php?t=2601443 and your phone will be back to stock unrooted and ready for the OTA. Your data will still be in tact.
I'm hoping this is the right thread.
I'm fairly new to the S4 coming from an S2. I did root MK2 using SafeRoot method. I should not have tripped Knox or anything like that. I unrooted with SuperSU unroot option. Everything looks OK except the Device Status shows Custom. I haven't gotten the OTA yet, but when it comes in, is it safe to try, or am I going to have problems?
Thanks,
Dennis_H
Dennis_H2 said:
I'm hoping this is the right thread.
I'm fairly new to the S4 coming from an S2. I did root MK2 using SafeRoot method. I should not have tripped Knox or anything like that. I unrooted with SuperSU unroot option. Everything looks OK except the Device Status shows Custom. I haven't gotten the OTA yet, but when it comes in, is it safe to try, or am I going to have problems?
Thanks,
Dennis_H
Click to expand...
Click to collapse
It all depends if you modded or disabled anything in the system partition. Including the hotspot mod. If you have, the ota will fail and you need to Odin the stock mk2 tar.
Sent from my icrap 2 using Tapatalk HD
cruise350 said:
It all depends if you modded or disabled anything in the system partition. Including the hotspot mod. If you have, the ota will fail and you need to Odin the stock mk2 tar.
Sent from my icrap 2 using Tapatalk HD
Click to expand...
Click to collapse
As far as I know, nothing in the system partition got changed with saferoot, and I never got around to installing any new recoveries or adding the hotspot mod. The hotspot mod was the real reason i rooted, but got a little concerned/confused after reading about it.If the custom in device status doesn't cause issues, I'll wait to get the OTA and then start reading about the HS mod again to see how to implement in 4.4.2 without tripping knox if possible.
Thanks for the info.
Dennis_H
Hi All,
Am using an i337M S4 from Rogers here in Canada and was wondering if it was possible to use ODIN and try out the new leaked 4.4 firmware. Is rooting required to achieve this?
rsarwar said:
Hi All,
Am using an i337M S4 from Rogers here in Canada and was wondering if it was possible to use ODIN and try out the new leaked 4.4 firmware. Is rooting required to achieve this?
Click to expand...
Click to collapse
First you must be certain the leak is for i337m model becuase there is the international version and the US version which are both different from the model you have (I have the same but Telus). Now as far as the files, if they are in .tar format then you can flash via Odin, if thet are .zip then you need a custom recovery to flash them. I know for certain you need to root to go the custom recovery route, I think you need to be rooted to flash they system files in Odin also (which if it is a stock rom you are flashing would loose root following the flash). Depending of the root method you choose be aware also that you may trip the Knox counter also, definately if you install a custom recovery. There a number of 4.4 roms for the i337m already that are not stock and are rooted, you may want to look at these also. Most importantly... before you attempt anything read...read ... read... there are pity falls you can end up in if you don't pay close attention......
Gage_Hero said:
First you must be certain the leak is for i337m model becuase there is the international version and the US version which are both different from the model you have (I have the same but Telus). Now as far as the files, if they are in .tar format then you can flash via Odin, if thet are .zip then you need a custom recovery to flash them. I know for certain you need to root to go the custom recovery route, I think you need to be rooted to flash they system files in Odin also (which if it is a stock rom you are flashing would loose root following the flash). Depending of the root method you choose be aware also that you may trip the Knox counter also, definately if you install a custom recovery. There a number of 4.4 roms for the i337m already that are not stock and are rooted, you may want to look at these also. Most importantly... before you attempt anything read...read ... read... there are pity falls you can end up in if you don't pay close attention......
Click to expand...
Click to collapse
Thanks for the reply .. actually I had a S2 before which was rooted and I used many different ROMs on it. I did root the S4 once as well but then lost it when I did the 4.3 update. Since then I never tried to re-root, is there an easy way too root right now for the i337M with 4.3?
If you are on stock unrooted 4.3 you should get official 4.4 update soon.
Also, questions go in the qna section not the development section
Sent from my SGH-I337 using Tapatalk
RK said:
If you are on stock unrooted 4.3 you should get official 4.4 update soon.
Also, questions go in the qna section not the development section
Sent from my SGH-I337 using Tapatalk
Click to expand...
Click to collapse
If you wait for the update you will likely be waiting longer for a root solution... if you want to root the phone, look up chainfire's CF-auto root for i337m
so upgraded to the leaked KK for my att note 3, and my wife just got the note3 as well and hers had an OTA to KK - versions are different and the bugs im experiencing are not on her version... i know i cant downgrade but how can i flash that update (official) since when i got to do an update it says im at the latest?
thanks !
amendolaro1 said:
so upgraded to the leaked KK for my att note 3, and my wife just got the note3 as well and hers had an OTA to KK - versions are different and the bugs im experiencing are not on her version... i know i cant downgrade but how can i flash that update (official) since when i got to do an update it says im at the latest?
thanks !
Click to expand...
Click to collapse
I want to upgrade from MLG to NC2 too. However, there is no direct way to do it at the moment.
However, if you are still at A2, you can use Safestrap to switch between MJ5 and NC2 (Please don't flash NC2 aboot.mbn!!!!!!)
Yes there is just do the mj5 restore that is in this section then follow one of the guides on how to install the ota
Sent from my SAMSUNG-SM-N900A using Tapatalk
As Jerrycoffman said. . . .
Restore back to MJ5 using this guide - http://forum.xda-developers.com/showthread.php?t=2559715
Don't root using the last part. It removes knox which will block you from being able to update the phone.
Next there will be a OTA to install its around 60mb. This is NB4
Lastly, just download kitkat OTA that's available. This may take sometime because it is a larger file size.
A lot of people have had issues installing the Kitkat OTA (including me). It fails at a certain percentage.
If you have this problem just follow this guide to fix it - http://forum.xda-developers.com/showthread.php?t=2701062
Make sure you back up any apps and files you need before starting this
Honestly instead of upgrading to official KK, why don't you just root and flash of of the available KK rom which is so much better than stock. Unless you don't care about the custom rom and root, you can follow what other has suggested to get the official OTA. Once you update thought, no way to get it root anymore
Sent from my SAMSUNG-SM-N900A using Tapatalk
Agree 100%!!!
mutantblack said:
Honestly instead of upgrading to official KK, why don't you just root and flash of of the available KK rom which is so much better than stock. Unless you don't care about the custom rom and root, you can follow what other has suggested to get the official OTA. Once you update thought, no way to get it root anymore
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
There is absolutely NO reason, if you follow instructions correctly, to accept the official update. Been there, done that. Glad I returned my OFFICIAL 4.4.2 phone and got another one to keep root on!!!
jreed3786 said:
There is absolutely NO reason, if you follow instructions correctly, to accept the official update. Been there, done that. Glad I returned my OFFICIAL 4.4.2 phone and got another one to keep root on!!!
Click to expand...
Click to collapse
i was under the impression that i cannot root once i am on KK? also i use ISIS on a daily basis... do the new custom KK roms support ISIS?
amendolaro1 said:
i was under the impression that i cannot root once i am on KK? also i use ISIS on a daily basis... do the new custom KK roms support ISIS?
Click to expand...
Click to collapse
As far as I know, that's a NO.
amendolaro1 said:
i was under the impression that i cannot root once i am on KK? also i use ISIS on a daily basis... do the new custom KK roms support ISIS?
Click to expand...
Click to collapse
Isis can work on kit kat. I had it working but changed to wallet out of principal
Sent from my SM-N9005 using xda app-developers app
Best solution:
Go to Best Buy and ask one of the Samsung people to get you to stock, in less than 10 to 15 minutes you'll be in OTA Kit Kat.
No reason to have OTA kitkat when you lose root.
I use ISIS daily with the following mod
http://forum.xda-developers.com/showthread.php?t=2425346
I am new to flashing so sorry if I have asked some stupid questions.
I have SGH-I337 (ATT) and would like to root and then maybe install Cyanogenmod or any other custom ROM.
Device Details:
Baseband - NC1
Build No. - NC1
Android Version - 4.4.2
I tried to root NC1 directly using motochopper. Then I read and I am now trying to downgrade.
I have got ODIN 3.09 but it does not say support to I337. I have gone through Noob Helper
I have downloaded all zips from Downgrade
After reading the article of Modems; I got confused about my bootloader.
I also have gone through the thread but after that confusion, I did not proceed ahead.
Could anyone please help me?
How to identify boot-loader?
Which ODIN to use or do I need to use SAFETRAP (not sure if bootloader is MF3) ?
mayurd said:
I am new to flashing so sorry if I have asked some stupid questions.
I have SGH-I337 (ATT) and would like to root and then maybe install Cyanogenmod or any other custom ROM.
Device Details:
Baseband - NC1
Build No. - NC1
Android Version - 4.4.2
I tried to root NC1 directly using motochopper. Then I read and I am now trying to downgrade.
I have got ODIN 3.09 but it does not say support to I337. I have gone through Noob Helper
I have downloaded all zips from Downgrade
After reading the article of Modems; I got confused about my bootloader.
I also have gone through the thread but after that confusion, I did not proceed ahead.
Could anyone please help me?
How to identify boot-loader?
Which ODIN to use or do I need to use SAFETRAP (not sure if bootloader is MF3) ?
Click to expand...
Click to collapse
Dont worry about Odin saying the device is i9505 or so. The flash will work.
For samsung phones running full stock firmware, all the components have the same version. Since your build is NC1, your bootloader is also NC1.
You are in the right track. Follow the downgrade thread to partial downgrade to MK2. Then use saferoot to root. Then install safestrap v3.72. Then use the deadly venom kitkat magic tool to install any kitkat rom of your choice from this list (post 3).
You cannot install any AOSP based rom. So, no CM. Even google play edition roms dont work.
You can install AOSP themed roms (like BlackBox3.0)
jmjoyas said:
Dont worry about Odin saying the device is i9505 or so. The flash will work.
For samsung phones running full stock firmware, all the components have the same version. Since your build is NC1, your bootloader is also NC1.
You are in the right track. Follow the downgrade thread to partial downgrade to MK2. Then use saferoot to root. Then install safestrap v3.72. Then use the deadly venom kitkat magic tool to install any kitkat rom of your choice from this list (post 3).
You cannot install any AOSP based rom. So, no CM. Even google play edition roms dont work.
You can install AOSP themed roms (like BlackBox3.0)
Click to expand...
Click to collapse
Thank you for the response. I have downgraded to MK2 and have done the root.
I was wondering if you could tell me if it is possible to install Liquid Smooth ROM. I have seen the video and I have downloaded from here which says S4 unified. Also, there are some videos claiming CM on S4.
Could anyone please help on the same?
mayurd said:
Thank you for the response. I have downgraded to MK2 and have done the root.
I was wondering if you could tell me if it is possible to install Liquid Smooth ROM. I have seen the video and I have downloaded from here which says S4 unified. Also, there are some videos claiming CM on S4.
Could anyone please help on the same?
Click to expand...
Click to collapse
As already stated, no AOSP based roms will work (ROMs that are built by compiling AOSP code). Only TouchWiz based roms will work. If you need AOSP look and feel, you can install an AOSP themed rom.
CM/AOSP on ATT S4 is only possible if you have the MDB/MDL bootloader. Anything above that, it wont work.
jmjoyas said:
As already stated, no AOSP based roms will work (ROMs that are built by compiling AOSP code). Only TouchWiz based roms will work. If you need AOSP look and feel, you can install an AOSP themed rom.
CM/AOSP on ATT S4 is only possible if you have the MDB/MDL bootloader. Anything above that, it wont work.
Click to expand...
Click to collapse
Sorry for the repeated questions.
I tried to update through Safestrap with BlackBox. But I got stuck on the boot screen where it shows Samsung Logo. I might have done something wrong. I just clicked next on BlackBox 3.0. Could anyone please help me !
Edit:
When I tried to reboot into recovery mood (Vol Up + Home + Power) it says:
" Secure Fail Kernel
(Warning Sign) System Software not authorised by ATT has been found on your phone"
Don't select the reboot now option in the aroma installer at the end. Then, after the ROM flash is complete and before you reboot the phone, you need to put the phone back in download mode and flash the MLD ap/bl/cp files from the tool
Sent from my GT-I9505 using Tapatalk
jmjoyas said:
Don't select the reboot now option in the aroma installer at the end. Then, after the ROM flash is complete and before you reboot the phone, you need to put the phone back in download mode and flash the MLD ap/bl/cp files from the tool
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
I flashed the NB1 using ODIN but it still stays on Samsung Logo with custom logo. I am not able to navigate any where else from that screen.
Edit:
I was able to go into system recovery. Please let me know if I can fix the error somehow.
Thanks a lot !
Get into stock recovery and factory reset. I am not sure why you flashed NB1 though, as there is no direct root method for it yet
Sent from my GT-I9505 using Tapatalk
jmjoyas said:
Get into stock recovery and factory reset. I am not sure why you flashed NB1 though, as there is no direct root method for it yet
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
He probably was following the steps that were provided elsewhere here that had you go from nc1 to nb1 then back to the M (I can't remember which M) one.
jmjoyas said:
Get into stock recovery and factory reset. I am not sure why you flashed NB1 though, as there is no direct root method for it yet
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
I had rooted MK2 and the installed the custom ROM (Blackbox) and then was suppose to flash NB1.
So, if I just did a factory reset it would solve my error?
Thanks for the help!
Edit:
I tried doing the factory reset. It just wipes all the user data. And I am still stuck on the same screen with Samsung and the custom logo.
mayurd said:
I had rooted MK2 and the installed the custom ROM (Blackbox) and then was suppose to flash NB1.
So, if I just did a factory reset it would solve my error?
Thanks for the help!
Edit:
I tried doing the factory reset. It just wipes all the user data. And I am still stuck on the same screen with Samsung and the custom logo.
Click to expand...
Click to collapse
I have sent you a PM. Probably I can assist better on hangout.
Note: Relevant device info will be provided below.
Dear techwizards,
I've been trying to root my phone for a while, I've done it before: both my S II and S III were international variants, and rooting those devices was very simple. But after getting an S IV from America and consensually downloading a samsung issued update -- I had yet to read up on the disadvantages of knox -- my rooting and android experience took a turn for the worse.
Long story short -- I know developers are a proud bunch who value their time -- I tried rooting my phone yesterday after almost smashing my phone on a coffee table. They say it's a well known side effect of Touchwiz, but I'll leave that to you.
I used a towelroot.com root -- a wonderful tool, if I may say so. After that, I visited the CM website and picked out the compatible CM11. I never got to flashing it though, as my problems arose while installing a recovery.
I had downloaded an app, a something recovery or another. They had an option to flash recoveries on there--it would download your recovery for you and do all the work, which seemed plausible as most video tutorials demonstrated. To my astonishment, doing so bricked my phone.
I tracked back, looked for the samsung stock rom, downloaded all 2.2 gb's of it and flashed it. It worked. My phone was functional but I suspect something within it stinks. My device, apparently for security reasons, wont let my wifi or 4g to establish a connection. It's making it impossible for me to fix this problem as I can't root my device or flash a custom rom.
About Device:
Pre problem I was running a:
SGH-I337UCUFNC1 baseband. Build Number ending with: NC1.
Android version: 4.2.2
Post problem:
Baseband: I337UCUFNC1
Build Number: JSS15J.I337UCUEMK2
Android version 4.3.
If I could find my original stock 4.2.2 NC1 version and get simple instructions on how to re-install it back to stock version, I'd be very grateful.
If you know how I could fix the internet issue on the MK2 one, and provide some simple instructions of how to root it, I'd be grateful too.
If you think neither would work, and have something else in mind, Im open to your suggestions.
Much Regards,
Y
You can only use safestrap for the recovery. See in the general forum index, all things at&t....
You can't flash cm, only touch wiz based roms
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
You can only use safestrap for the recovery. See in the general forum index, all things at&t....
You can't flash cm, only touch wiz based roms
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I never got to installing or attempting to install CM.
Things took a turn for the unexpected after I tried installing CMW recovery.
Please reread my post
I've read it. You can't install cwm. That's what had messed up your device. The only recovery you can use is safestrap
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
jd1639 said:
I've read it. You can't install cwm. That's what had messed up your device. The only recovery you can use is safestrap
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
Click to expand...
Click to collapse
I see. Thanks for the info. Do you know what could be done to restore my device to stock? As of now I'm running a MK2 Android 4.3 on a NC1 4.2.2 device and the wifi/4g connection aren't working.
androidshmandroid said:
I see. Thanks for the info. Do you know what could be done to restore my device to stock? As of now I'm running a MK2 Android 4.3 on a NC1 4.2.2 device and the wifi/4g connection aren't working.
Click to expand...
Click to collapse
Did you look for the thread I pointed you to? In the general forum index, all things at&t... You're going to want to start there. That'll link you to this
http://forum.xda-developers.com/showthread.php?p=49687770
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
Since your bootloader is already locked, you might as well Odin to stock. Odin to NB1 then use stock recovery to flash the NC1 update from a zip file on a microSD.
Part of the problem is that the NC1 is not 4.2.2 like you listed, but 4.4.2. That's the update you applied that started the sordid tale. When you were on 4.2.2, with bootloader MD<something>, you could have flashed CM or whatever, because you would be able to have TWRP or CWM recovery. When Samsung pushed out a 4.3 update (MK2 I believe) all the unlocked bootloader fun was over, probably permanently for this phone.
When you flashed MK2 firmware (4.3) onto the phone, parts of it don't work with the NC1 baseband, causing the problems you've seen. If you Odin NB1, then do the quick zip update from stock recovery to get all the way to NC1, you'll be back to stock and everything should work.
Once that's done, you can go through this process:
1. Root with Towelroot.
2. Install SuperSU to manage root access. (You might have to reboot, it's a 50%/50% shot... sometimes it hangs trying to disable Knox... no worries just reboot)
3. Install SafeStrap... it will create the safestrap recovery. You might need to install SELinux Mode Changer app (from play store) and set to permissive, to get Safestrap installed.
4. Boot to the SafeStrap recovery. Install any touchwiz rom. Only touchwiz compatible roms will work. I liked GoldenEye.
When installing touchwiz ROMs, typically one flashes the ROM, then SuperSU, then the NC1 modules, then the ATT BuildProp/APN file. Sounds complex but goes quickly. Some roms have some of these things built in.
Good luck! I eventually decided I didn't like the ATT Samsung restrictions of the locked boot loader, and bought a T-Mobile M919 variant of the S4. Unlocked boot loader. Woo hoo. And works fine on ATT.
Marc