Related
Hello,
I started this thread as a way of keeping track of all the threads related to the HTC One Dual Sim variant (I have a 802w -M7_DUG-).
I''m not trying to get credit from the information below. If something was helpful to you, you can thank the authors in their original threads.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IMPORTANT INFORMATION REGARDING DATA WIPE by @Falseclock
GUIDES & INFORMATION:
[PHOTOS] HTC ONE 802w for China spotted with removable cover, dual SIM slots and microSD slot! by @androidindian
[GUIDE] HTC Dual Sim 802w, 802t, 802d S-Off, Recovery, Updates 4.2.2, ROOT, Google by @yahya.hamid - OP OUTDATED
[GUIDE] China Unicom 802W Dual Sim.. how to root and install Google Apps by @kiwiandy (A lot of more information & tools in this thread) - OP OUTDATED
[GUIDE] Install Google services without Rooting by @ash7474 - OP OUTDATED
[S-OFF] Moonshine S-OFF by @Fuses
Guide to S-Off 802w model by @shwetkprabhat
HTC One variants by @mike1986. (all technical details for all variants in one place)
How to install Google Play on the HTC One Dual SIM 802w by @MarrkDaviid
How to remove Chinese apps from the HTC One Dual SIM 802w by @MarrkDaviid
Return to stock firmware on the HTC One Dual SIM 802w by @MarrkDaviid
Service Mode: Enter *#*#4636#*#* on Dialer
S-OFF on HBOOT 2.26 & 2.27 (thanks to @mahesh_9j for the tip) - Read this guide: [GUIDE] Rumrunner S-Off for HTC One M7 International by @electronical
[Guide] HTC Dual Sim 802w (China Unicom Version), apply generic european RUU and OTA by @shwetkprabhat
S-OFF & Unlock with firewater (thanks to @mahesh_9j for the tip) (HBOOT 2.49 and above)
[Guide] Firewater S-Off by @alessiomoro1994 (HBOOT 2.49 and above)
Q&A
[Q] HTC One 802w Unicom - Failed RUU now black screen and no charge light
[Q] HTC One Dual Sim (802w) killing SD Cards?? FIXED
Q: I'm on HBOOT 2.26/2.27. Can I S-OFF? A: Yes you can!, check the guide above!
Q: I'm on HBOOT 2.29. Can I S-OFF? A: Try with Firewater linked above
Q: I tried to s-ff my phone with firewater but I get the following error: kernal contains anti-firewater patch ! A: Install Maximus HD and try! (see ROM section)
RUUs + OTAs:
KitKat RUU for Chinese model by @penguinus
HTC One Dual SIM (802W) RUU collection by @bgcngm - ALWAYS UPDATED
[ROM]STOCK[802d]M7C_DWG[Official 4.2.2 RUU 2.17.1401.2] by @ravinder0003
[Collection] HTC Dual Sim 802w, 802t, 802d - Official RUU and OTA by @shwetkprabhat (for all 802 models and includes some tips and info, recommended) - ALWAYS UPDATED
OTA update from 2.43 (4.2.2) to 4.21 (4.4.2) for chineese 802d (not for indian, taiwan etc) by @penguinus
NANDROID BACKUPS:
CWM Backup of 802 D dual SIM 2.37.720.1 by @sankar24
TWRP backup of stock ROM KK 4.4.2 with Sense 6 (5.17.401.6) for WWE 802W by @J_M_V_S
RADIOS:
Extracted radio's from some OTA by @criszz - OUTDATED
Latest 802w radio extracted from 2.41 Rusia (31/01/2014) by @criszz - OUTDATED
HBOOT:
HBOOT v2.49.0000 (plus CWM-Touch Recovery 6.0.3.6 & HTC WWE splash logo) by @bgcngm - Fixes the "device enumeration failed" problem under Windows 8.1 when connecting phone under fastboot mode
HTC splash logo + HBOOT 2.49 + CWM Touch recovery 6.0.4.6 by @bgcngm
RECOVERY:
CWM Touch Recovery (version 6.0.3.6) by @bgcngm - OUTDATED
HTC splash logo + HBOOT 2.49 + CWM Touch recovery 6.0.4.6 by @bgcngm - OUTDATED
TWRP for HTC One 802w (version 2.8.0.2) by @J_M_V_S - OUTDATED
[RECOVERY][M7C] HTC One Dual SIM (802W, 802D and 802T variants) OFFICIAL by @bgcngm - ALWAYS UPDATED - NEW!
Flash CWM or TWRP without unlocking bootloader (seach on 1st post for the title: Flash CWM or TWRP without unlocking bootloader: PN07IMG.zip and flash through HBOOT) by @shwetkprabhat
Go back to Stock recovery without unlocking bootloader (seach on 1st post the for title: Go back to Stock recovery without unlocking bootloader: PN07IMG.zip and flash through HBOOT) by @shwetkprabhat
HTC splash logo + HBOOT 2.49 + CWM Touch recovery 6.0.4.8 by @bgcngm
ROMS: Please note 801 ROMs are not compatible with 802 variants unless explicitly stated.
Maximus HD Rom by @LlabTooFeR - OUTDATED
Unofficial Ven*m Kang available as well (no links can be provided nor can be discussed in this thread!)
KERNELS:
[KERNEL][M7C] HTC One M7 Dual SIM (802W) by @bgcngm (based on ElementalX kernel)
Stock Kernel Source - OUTDATED
MODS / SCRIPTS / MISC:
[MOD] How to install 'Xposed' on the HTC One by @paulobrien - OUTDATED
[MOD] How to install 'Xposed' on the HTC One [UPDATED] by @J_M_V_S - OUTDATED
[SCRIPT] ROM Cleaner | Remove Bloatware | Backup Apps | Install Apps/Mods by @Patrics83
Call Recording for MaximusHD ROM flashable zip by J_M_V_S (download attached zip, flash via recovery & reboot | Recodings stored at My Documents/My Recordings on internal memory) - Mod by user700 at 4pda.ru - OUTDATED
Customize Nofication Light (blink timeout & blink while charging) *REQUIRES ROOT* by @Anonymoos
HTC Tweaker (Xposed module with specific Dual Sim options like call recording, color tweaking, etc) by @Falseclock - RECOMMENDED
Blinkfeed & sixSense Launcher for 802w by @crizzz - OUTDATED
RoamingIconFix for stock 4.4.2 Sense 6.0 Europe ROM by @geenyous
THEMES / ANIMATIONS: 801 Themes (except some dual-sim specific things) & Animations are compatible with 802 variants.
[MOD][THEME][Dual-Sim][v.01] Simple Touch of Blue For hTc 802w [Apps/TaskBar/Dialer] by @criszz
[BOOTSPLASH] Custom One Splash Screens [70+][Taking Requests] by @iElvis
[Boot Animation] Digital Rain (Matrix) by @Crackanug
[THEME] TWRP Holofied - Black / Dark / Light / Play / XDA / MultiROM by @z31s1g - FOR TWRP RECOVERY
TOOLS:
[TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer by @Snoop05
Radio files extracted from OTA for 802w here: http://forum.xda-developers.com/show...postcount=1102
criszz said:
Radio files extracted from OTA for 802w here: http://forum.xda-developers.com/show...postcount=1102
Click to expand...
Click to collapse
Thanks. Added to the OT. If anyone has any suggestions I will update the post accordingly.
24/10/2013 - Call Recording added for MaximusHD ROM (Tested on M7_DUG on ROM ver 1.0.2)
Nice collection!
Sent from my HTC 802w using xda app-developers app
Camera purple after update to 4.2.2
Hi mate,
I got problem on my camera after update to 4.2.2. It became purple at dark place. I want to downgrade back to 4.1.2, but not sure how to do that. Anyone can help Pls?
Appreciate for ur help.
Thanks
Sopheak
after update
sopheak.min said:
Hi mate,
I got problem on my camera after update to 4.2.2. It became purple at dark place. I want to downgrade back to 4.1.2, but not sure how to do that. Anyone can help Pls?
Appreciate for ur help.
Thanks
Sopheak
Click to expand...
Click to collapse
Grab the RUU from here: http://forum.xda-developers.com/showpost.php?p=43177948&postcount=369
Rename that file to PN07IMG.ZIP
Put it in the root of your External SD Card (easiest method, you can also put it in the root of the internal memory if you know how)
Turn your phone pressing VOL - & Power
The phone should automatically detect the RUU and update (it takes some time and you'll see a vertical progress bar on the top right side)
After update, turn the phone off and remove SD card
Test if it boots properly, if not, try updating one more time from step 3.
After sucessful boot, delete PN07IMG.ZIP
J_M_V_S said:
Grab the RUU from here: http://forum.xda-developers.com/showpost.php?p=43177948&postcount=369
Rename that file to PN07IMG.ZIP
Put it in the root of your External SD Card (easiest method, you can also put it in the root of the internal memory if you know how)
Turn your phone pressing VOL - & Power
The phone should automatically detect the RUU and update (it takes some time and you'll see a vertical progress bar on the top right side)
After update, turn the phone off and remove SD card
Test if it boots properly, if not, try updating one more time from step 3.
After sucessful boot, delete PN07IMG.ZIP
Click to expand...
Click to collapse
Thanks for sharing,
Let me share on my device first:
Dual Sim (802w)
Unlocked Boatloader
M7CDUG PVT SHIP S-On RH
HBoot-2.27.0000
Radio-U3.11.3507.08
OpenDSP-v31.120.274.0617
QSC-1237.25.32.0717
OS-2.36.1402.1
eMMC-boot 2048MB
Oct 9 2013
After I tried to follow your instruction. It was not success restoring the the firmware.
Message :
- Loading PN07IMG.ZIP
- Signature verification
- Just Start phasing ..., it ask me to reboot
I believe it because of the difference in the OS version. (my OS 2.36 because I already update OTA, and that's I want to downgrade back)
Correct me if I am wrong? and How could I restore it back.? any possible way?
Really feel bad about the phone when the camera became Purple at dark place.
Thanks again and appreciate for your kind help.
All the best to u.
Sopheak
---------- Post added at 12:33 PM ---------- Previous post was at 12:08 PM ----------
Thanks for sharing,
Let me share on my device first:
Dual Sim (802w)
Unlocked Boatloader
M7CDUG PVT SHIP S-On RH
HBoot-2.27.0000
Radio-U3.11.3507.08
OpenDSP-v31.120.274.0617
QSC-1237.25.32.0717
OS-2.36.1402.1
eMMC-boot 2048MB
Oct 9 2013
After I tried to follow your instruction. It was not success restoring the the firmware.
Message :
- Loading PN07IMG.ZIP
- Signature verification
- Just Start phasing ..., it ask me to reboot
I believe it because of the difference in the OS version. (my OS 2.36 because I already update OTA, and that's I want to downgrade back)
Correct me if I am wrong? and How could I restore it back.? any possible way?
Really feel bad about the phone when the camera became Purple at dark place.
Thanks again and appreciate for your kind help.
All the best to u.
Sopheak
we 802w were the first to get 4.2.2 and now are the last to get the 4.3 update
sopheak.min said:
Thanks for sharing,
Let me share on my device first:
Dual Sim (802w)
Unlocked Boatloader
M7CDUG PVT SHIP S-On RH
HBoot-2.27.0000
Radio-U3.11.3507.08
OpenDSP-v31.120.274.0617
QSC-1237.25.32.0717
OS-2.36.1402.1
eMMC-boot 2048MB
Oct 9 2013
After I tried to follow your instruction. It was not success restoring the the firmware.
Message :
- Loading PN07IMG.ZIP
- Signature verification
- Just Start phasing ..., it ask me to reboot
I believe it because of the difference in the OS version. (my OS 2.36 because I already update OTA, and that's I want to downgrade back)
Correct me if I am wrong? and How could I restore it back.? any possible way?
Really feel bad about the phone when the camera became Purple at dark place.
Thanks again and appreciate for your kind help.
All the best to u.
Sopheak
---------- Post added at 12:33 PM ---------- Previous post was at 12:08 PM ----------
Thanks for sharing,
Let me share on my device first:
Dual Sim (802w)
Unlocked Boatloader
M7CDUG PVT SHIP S-On RH
HBoot-2.27.0000
Radio-U3.11.3507.08
OpenDSP-v31.120.274.0617
QSC-1237.25.32.0717
OS-2.36.1402.1
eMMC-boot 2048MB
Oct 9 2013
After I tried to follow your instruction. It was not success restoring the the firmware.
Message :
- Loading PN07IMG.ZIP
- Signature verification
- Just Start phasing ..., it ask me to reboot
I believe it because of the difference in the OS version. (my OS 2.36 because I already update OTA, and that's I want to downgrade back)
Correct me if I am wrong? and How could I restore it back.? any possible way?
Really feel bad about the phone when the camera became Purple at dark place.
Thanks again and appreciate for your kind help.
All the best to u.
Sopheak
Click to expand...
Click to collapse
You can not downgrade to 4.1.2 because it has lower HBOOT version than you have currently.
stevendph said:
You can not downgrade to 4.1.2 because it has lower HBOOT version than you have currently.
Click to expand...
Click to collapse
Thanks You ur sharing.
I hope that 4.3 will come out and fix the camera issue ..
btw, I want to restore my phone in order to update OTA.
Any recommendation?
Detail :
Dual Sim (802w)
Unlocked Boatloader
M7CDUG PVT SHIP S-On RH
HBoot-2.27.0000
Radio-U3.11.3507.08
OpenDSP-v31.120.274.0617
QSC-1237.25.32.0717
OS-2.36.1402.1
eMMC-boot 2048MB
Oct 9 2013
Thanks again.
Sopheak
sopheak.min said:
Thanks You ur sharing.
I hope that 4.3 will come out and fix the camera issue ..
btw, I want to restore my phone in order to update OTA.
Any recommendation?
Detail :
Dual Sim (802w)
Unlocked Boatloader
M7CDUG PVT SHIP S-On RH
HBoot-2.27.0000
Radio-U3.11.3507.08
OpenDSP-v31.120.274.0617
QSC-1237.25.32.0717
OS-2.36.1402.1
eMMC-boot 2048MB
Oct 9 2013
Thanks again.
Sopheak
Click to expand...
Click to collapse
Use this - http://d-h.st/NAf ( from here - http://forum.xda-developers.com/showpost.php?p=43177948&postcount=369 )
And if you need instructions use my first part of s-off guide (in my signature) to go to stock, make sure you backup first.
shwetkprabhat said:
Use this - http://d-h.st/NAf ( from here - http://forum.xda-developers.com/showpost.php?p=43177948&postcount=369 )
And if you need instructions use my first part of s-off guide (in my signature) to go to stock, make sure you backup first.
Click to expand...
Click to collapse
It doesn't support with my version.
I got 4.2.2 with ending OS-2.36
link u share is just only OS-2.30
I tried already, but it doesn't allow me to restore.
more importantly, I got S-On RH. Not sure if this is the reason why I could not restore it.
any other way to make it work ?
Appreciate for ur help . where is the bottom for me to click Thanks ?
sopheak.min said:
It doesn't support with my version.
I got 4.2.2 with ending OS-2.36
link u share is just only OS-2.30
I tried already, but it doesn't allow me to restore.
more importantly, I got S-On RH. Not sure if this is the reason why I could not restore it.
any other way to make it work ?
Appreciate for ur help . where is the bottom for me to click Thanks ?
Click to expand...
Click to collapse
post the error, and couple of details - what rom are you using? only thing you cant do with s-on is to go downgrade the firmware.
shwetkprabhat said:
post the error, and couple of details - what rom are you using? only thing you cant do with s-on is to go downgrade the firmware.
Click to expand...
Click to collapse
Hi dear,
First here is my detail :
Dual Sim (802w)
Unlocked Boatloader
M7CDUG PVT SHIP S-On RH
HBoot-2.27.0000
Radio-U3.11.3507.08
OpenDSP-v31.120.274.0617
QSC-1237.25.32.0717
OS-2.36.1402.1
eMMC-boot 2048MB
Oct 9 2013
I download RUU 4.2.2 (2.30.1402.1) file from here http://d-h.st/NAf
It's original from this link: http://forum.xda-developers.com/showpost.php?p=43177948&postcount=369
I rename the file to be short as Ruu.Zip, keep it in the same folder with the command tool (adb and fastboot)
Then I used commend to flash this RUU as below :
1- Put Phone into boatloader mod -> connect Phone to PC (all driver already installed)
2- Look bootloader : fastboot oem lock (in command DOS from the same folder)
3- To flash : fastboot oem rebootRUU
4- To flash RUU file : fastboot flash zip ruu.zip
Message I got :
1- Sending the file size -ok
2- Check signature -ok
3- Start parsing the file -fail
4- Fail because of difference version
What I have realise is the the RUU.zip that I download about was in 4.2.2 with OS 2.30.1402.1_release where I used to restore success before.
However after I upgrade again OTA again, my version get up 4.2.2 with OS-2.36.1402.1_release (as you seen in above of my phone detail above), And I could not success restore with the RUU.zip 4.2.2 with OS 2.30.1402.1_release again.
(u can see the last OTA file here http://forum.xda-developers.com/showpost.php?p=43177948&postcount=369). The size is 78.63MB and could upgrade the OS to 2.36.1402.1_release
I hope that u got the point that I want to mention here.
Could you help me to get out on how I can simply restore my phone to be stock?
Is there any other Rom that I used to restore my phone (Maybe it would fix the camera issue with purple at dark place).
Appreciate and Thanks for your kindness to help.
Best Regards,
Sopheak
sopheak.min said:
Hi dear,
First here is my detail :
Dual Sim (802w)
Unlocked Boatloader
M7CDUG PVT SHIP S-On RH
HBoot-2.27.0000
Radio-U3.11.3507.08
OpenDSP-v31.120.274.0617
QSC-1237.25.32.0717
OS-2.36.1402.1
eMMC-boot 2048MB
Oct 9 2013
I download RUU 4.2.2 (2.30.1402.1) file from here http://d-h.st/NAf
It's original from this link: http://forum.xda-developers.com/showpost.php?p=43177948&postcount=369
I rename the file to be short as Ruu.Zip, keep it in the same folder with the command tool (adb and fastboot)
Then I used commend to flash this RUU as below :
1- Put Phone into boatloader mod -> connect Phone to PC (all driver already installed)
2- Look bootloader : fastboot oem lock (in command DOS from the same folder)
3- To flash : fastboot oem rebootRUU
4- To flash RUU file : fastboot flash zip ruu.zip
Message I got :
1- Sending the file size -ok
2- Check signature -ok
3- Start parsing the file -fail
4- Fail because of difference version
What I have realise is the the RUU.zip that I download about was in 4.2.2 with OS 2.30.1402.1_release where I used to restore success before.
However after I upgrade again OTA again, my version get up 4.2.2 with OS-2.36.1402.1_release (as you seen in above of my phone detail above), And I could not success restore with the RUU.zip 4.2.2 with OS 2.30.1402.1_release again.
(u can see the last OTA file here http://forum.xda-developers.com/showpost.php?p=43177948&postcount=369). The size is 78.63MB and could upgrade the OS to 2.36.1402.1_release
I hope that u got the point that I want to mention here.
Could you help me to get out on how I can simply restore my phone to be stock?
Is there any other Rom that I used to restore my phone (Maybe it would fix the camera issue with purple at dark place).
Appreciate and Thanks for your kindness to help.
Best Regards,
Sopheak
Click to expand...
Click to collapse
Looks like we need to wait for the 2.36 ruu zip files, I will keep searching and upload once I find it.
sopheak.min said:
Hi dear,
First here is my detail :
Dual Sim (802w)
Unlocked Boatloader
M7CDUG PVT SHIP S-On RH
HBoot-2.27.0000
Radio-U3.11.3507.08
OpenDSP-v31.120.274.0617
QSC-1237.25.32.0717
OS-2.36.1402.1
eMMC-boot 2048MB
Oct 9 2013
I download RUU 4.2.2 (2.30.1402.1) file from here http://d-h.st/NAf
It's original from this link: http://forum.xda-developers.com/showpost.php?p=43177948&postcount=369
I rename the file to be short as Ruu.Zip, keep it in the same folder with the command tool (adb and fastboot)
Then I used commend to flash this RUU as below :
1- Put Phone into boatloader mod -> connect Phone to PC (all driver already installed)
2- Look bootloader : fastboot oem lock (in command DOS from the same folder)
3- To flash : fastboot oem rebootRUU
4- To flash RUU file : fastboot flash zip ruu.zip
Message I got :
1- Sending the file size -ok
2- Check signature -ok
3- Start parsing the file -fail
4- Fail because of difference version
What I have realise is the the RUU.zip that I download about was in 4.2.2 with OS 2.30.1402.1_release where I used to restore success before.
However after I upgrade again OTA again, my version get up 4.2.2 with OS-2.36.1402.1_release (as you seen in above of my phone detail above), And I could not success restore with the RUU.zip 4.2.2 with OS 2.30.1402.1_release again.
(u can see the last OTA file here http://forum.xda-developers.com/showpost.php?p=43177948&postcount=369). The size is 78.63MB and could upgrade the OS to 2.36.1402.1_release
I hope that u got the point that I want to mention here.
Could you help me to get out on how I can simply restore my phone to be stock?
Is there any other Rom that I used to restore my phone (Maybe it would fix the camera issue with purple at dark place).
Appreciate and Thanks for your kindness to help.
Best Regards,
Sopheak
Click to expand...
Click to collapse
You can't get soff on Hboot 2.27 regardsless the firmware. - there no solution yet.
Joost39 said:
You can't get soff on Hboot 2.27 regardsless the firmware. - there no solution yet.
Click to expand...
Click to collapse
Thanks for this collection. I am still waiting for 4.3 and fixing for my camera.
Hi
Can any one advise me about the best cooked room
I have been lost in the Chinese forums
SeeYaYa said:
Hi
Can any one advise me about the best cooked room
I have been lost in the Chinese forums
Click to expand...
Click to collapse
There are only 2 available as far as I have seen - MaximusHD and Soul Rom - for dual sim models.
[Stock Rom] | Aroma | 5.11.401.10 | 4.19.401.11 | Radio | Twrp | Ota | M7_U & M7_UL
METHOD 1
Flashable Aroma Zip 5.11.401.10 with possibility to root, flash radio and stock recovery.
Download from HERE MD5: 1c6223321e398a0e34393cafa1bbf930 and flash with TWRP recovery.
Credits to @crushalot for aroma script
WARNING!!! include optional flashable radio.
If you want to update firmware, flash 4.19.401.11 and will receive official OTA (firmware v5.11.401.10 is included) after restarting the phone.
Flashable Aroma Zip 4.19.401.11 with possibility to root, flash radio and stock recovery.
Download from HERE MD5: b09d17a3f05ebf4202e35188f2338f72 and flash with TWRP recovery.
Credits to @crushalot for aroma script
WARNING!!! include optional flashable radio.
METHOD 2
I made a stock system backup with TWRP Recovery after updated from OTA_M7_UL_K44_SENSE60_MR_HTC_Europe_5.11.401.10-4.19.401.11_release_372404wj19h95c0x6oa19n.zip
It's for M7_UL (HTC ONE LTE Edition)
You need TWRP recovery I recommend v2.6.3.3
Download from here or this mirror MD5 171ade9b0b643aaee08b0976bdb5e695
Unzip, copy to your twrp folder, reboot to recovery and restore system & boot. If you don't have a TWRP folder on phone storage, make a backup of your existing rom (or just boot, it's more quickly) and will be created automatically. Should look like this: /sdcard/TWRP/BACKUPS/FAxxxxxxxxxx
TWRP will ask you to install root before rebooting to system if you need (don't root if you want to apply new OTAs).
Here you'll find how to lock / relock bootloader without htcdev (must be S-OFF)
For M7_UL:
modelid: PN0710000
CID list included in android-info.txt
cidnum: HTC__001
cidnum: HTC__Y13
cidnum: HTC__E11
cidnum: HTC__102
cidnum: HTC__203
cidnum: HTC__405
cidnum: HTC__304
cidnum: HTC__A07
cidnum: HTC__032
cidnum: HTC__J15
cidnum: HTC__016
If you receive a new OTA witch fail to update because some missing file, flash preloaded data with TWRP recovery:
Preload-data-sense6-5.11.401.10-TeHashX.zip
MD5 14a402bea4d3961620d79af529cf22e3
If you want to update with latest OTA, reboot to bootloader and flash stock recovery
MD5 ced569797714c139f5980233a98c6717
Code:
fastboot flash recovery stock_recovery_5.11.401.10.img
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
_____________________________________________
Thanx @mido.fayad for all files provided
For M7_U
mid=PN0711000
CID list included in android-info.txt
cidnum: HTC__001
cidnum: HTC__M27
cidnum: HTC__K18
cidnum: HTC__J15
cidnum: HTC__A48
TWRP BackUp 5.11.401.110
MD5 5474210678578828d9e652d1ca9a729a
Preload-Data-Sense6-stock-5.11.401.110-By-Mido.Fayad.zip
MD5 0cc1c89de80dc57526ba0f0e7155e754
TWRP BackUp 4.19.401.5
MD5 A80FE096FA2815FA080F78DE765C2C9B
Preload-Data-Sense5.5-Stock-4.19.401.5-By-Mido.Fayad.zip
MD5 0887cd259ec9706f1e24e8ac58b987f8
OTA_M7_U_K44_SENSE60_MR_HTC_Europe_5.11.401.110-4.19.401.5_release_3724106akzxaksbvcwdgds.zip
MD5 2d8eae64e7b9c555aff8cd2c5c2a8bfb
If you want to update with latest OTA, reboot to bootloader and flash stock recovery
MD5 bbffe43177017aa0ce108e4e972860dc
Code:
fastboot flash recovery stock_recovery_5.11.401.110.img
In case you want to apply OTA manually, read this guide.
Let me understand better: I'll unlock bootloader, install TWRP, go and wipe everything except sdcard and then restore system and boot in order to get this work and start with a clean system?
--anx-- said:
Let me understand better: I'll unlock bootloader, install TWRP, go and wipe everything except sdcard and then restore system and boot in order to get this work and start with a clean system?
Click to expand...
Click to collapse
Wipe only if you get some fc's after restoring system
TeHashX said:
Wipe only if you get some fc's after restoring system
Click to expand...
Click to collapse
Ok, so restore with everything in its place.
I wanted to wipe first only because I wanted a clean system after the new update.
But this is stock without any add-on or something similar? Future OTA (if will be any...) will come?
EDIT: I just forget that if I'll install this obviously it will not update my radio firmware with 5.11.401.10, since I have to be S-OFF in order to install new firmware or new radio...and I'm S-ON...so I'll have to wait the damn OTA...
will it work with cid htc_001 and clockwork recovery?
Can i restore System of this backup on an deodexed Stock ROM?
tcpma said:
will it work with cid htc_001 and clockwork recovery?
Click to expand...
Click to collapse
HTC__001 yes
CWM no
alireza_simkesh said:
Can i restore System of this backup on an deodexed Stock ROM?
Click to expand...
Click to collapse
Do a full backup and if it's not working just restore
It worked perfectly, thank you!!
EDIT
It is compiled 2 weeks later than Telus rom... And it is considerably faster
Damn S-OFF!!!!
I wanted to install that!
Kudos to @TeHashX for the work!
Thanks bud
Does It work on J15?
I cant find HTC_J15 & PN07110 nandroid backup or K44 RUU
Gunners 4ever said:
Thanks bud
Does It work on J15?
I cant find HTC_J15 & PN07110 nandroid backup or K44 RUU
Click to expand...
Click to collapse
It's for
cidnum: HTC__001
cidnum: HTC__Y13
cidnum: HTC__E11
cidnum: HTC__102
cidnum: HTC__203
cidnum: HTC__405
cidnum: HTC__304
cidnum: HTC__A07
cidnum: HTC__032
cidnum: HTC__J15
cidnum: HTC__016
TeHashX said:
It's for
cidnum: HTC__001
cidnum: HTC__Y13
cidnum: HTC__E11
cidnum: HTC__102
cidnum: HTC__203
cidnum: HTC__405
cidnum: HTC__304
cidnum: HTC__A07
cidnum: HTC__032
cidnum: HTC__J15
cidnum: HTC__016
Click to expand...
Click to collapse
which MID??
Gunners 4ever said:
which MID??
Click to expand...
Click to collapse
PN0710000 but you can try anyway
does it work with soff device with supercid?
zera89 said:
does it work with soff device with supercid?
Click to expand...
Click to collapse
Yes
Thanks, wish I was s-off, but will do for now if ever I have to send it back under warranty, could do with a UK Vodafone version of this.
Seanie280672 said:
Thanks, wish I was s-off, but will do for now if ever I have to send it back under warranty, could do with a UK Vodafone version of this.
Click to expand...
Click to collapse
Don't need s-off, only twrp recovery.
TeHashX said:
Don't need s-off, only twrp recovery.
Click to expand...
Click to collapse
You need s-off to upgrade the firmware or hboot
Gunners 4ever said:
Thanks bud
Does It work on J15?
I cant find HTC_J15 & PN07110 nandroid backup or K44 RUU
Click to expand...
Click to collapse
I will try to upload it to you when I have some time
Your version should be 5.11.401.110 not .10
I have the kit Kat sense 6 which is 5.11.401.110
Also I have the kit Kat one with sense 5.5 which is 4.19.401.5 and then u can take ota to sense 6
And if u need the firmware only of sense 6, tell me to decide which ones to upload
And the ota file also OTA_M7_U_K44_SENSE60_MR_HTC_Europe_5.11.401.110-4.19.401.5_release_*********.zip
Note that this is for m7u with mid PN0711000
Sent from my HTC One using Tapatalk
Just the kernel?
Would I be able to restore just the kernel from this nandroid? I'm running stock T-Mobile US 5.14.531.1 with ElementalX kernel. I'd like to go back to the stock kernel but can't find it. Is the kernel in this 5.11.401.10 the same as would be in the T-Mobile US version?
Here is a guide on updating your branded/unbranded non developer edition HTC ONE M8 to the developer edition android 5.0 (lollipop) update and also converting your device to a developer edition device by modifying the MID and CID of your device.
(this will also get you new updates as soon as HTC releases them as your phone is now a developer edition phone)
REQUIRES S-OFF AND POSSIBLY UNLOCKED BOOTLOADER
GPE CONVERTED DEVICES NEED TO GO BACK TO SENSE FIRST
HTC Drivers - https://mega.co.nz/#!9cpz0Soa!rZH0H5djENbFN2xkS9S7yUlXzX_vcC5yOHhmUR55kUM
ADB + Fastboot - https://drive.google.com/file/d/0B1S0LCuXCnnmOWhnUk1ZWVdQakE/view
First thing you want to do is boot the device and enable adb then type the below lines
Code:
adb shell
su
DO NOT MESS UP THE BELOW COMMAND - COPY AND PASTE IT - ENTERING IT WRONG COUlD BRICK YOUR DEVICE
Code:
echo -ne '\x30\x00\x50\x00\x36\x00\x42\x00\x31\x00\x32\x00\x30\x00\x30\x00\x30' | dd of=/dev/block/mmcblk0p5 bs=1 seek=16384
Code:
adb reboot bootloader
fastboot oem writecid BS_US002
fastboot reboot-bootloader
Download this file RUU_M8_UL_L50_SENSE60_MR_BrightstarUS_WWE_4.16.1540.8_Radio_1.24.21331147A1.09G_20.68.4196.01_F_release_411207_signed_2.exe
(STOCK LOLLIPOP 5.0 RUU FOR UNLOCKED + DEVELOPER EDITION HTC ONE M8 [this is what you have now since you changed CID and MID])
CRC32: 665CF81E
MD5: FDB3C48A40F1D42165783D75CFF4B846
SHA-1: 0B3C785F7735133ED11852E2FFAD29949A514DB1
Once it is downloaded, type the following commands
Code:
fastboot oem rebootRUU
FLASHING RUU'S WILL WIPE YOUR INTERNAL SD (/DATA/MEDIA)
Run RUU_M8_UL_L50_SENSE60_MR_BrightstarUS_WWE_4.16.1540.8_Radio_1.24.21331147A1.09G_20.68.4196.01_F_release_411207_signed_2.exe and just press next/confirm etc. ignore the usb connection instructions, once that is done, the device will reboot and you will be on lollipop
CLICK FOR OLD METHOD
Download this file - http://dl3.htc.com/application/RUU_..._2G_20.63.4196.01_release_394319_signed_2.exe (Mirror)
(STOCK RUU FOR UNLOCKED + DEVELOPER EDITION HTC ONE M8 [this is what you have now since you changed CID and MID])
CRC32: 79E8DE54
MD5: 5040B8D54D0ADA150531C66D899ABBE9
SHA-1: A1E39A089A23417DDF5A682BB6A23C9BDE77025B
Once it is downloaded, type the following commands
Code:
fastboot oem rebootRUU
flashing the RUU will most defintely wipe your internal sd (/data/media)
Run RUU_M8_UL_K444_SENSE60_MR_BrightstarUS_WWE_3.28.1540.5_Radio_1.21.21331147A1.19_2G_20.63.4196.01_release_394319_signed_2.exe and just press next/confirm etc. ignore the usb connection instructions
once that is done, the device will reboot and you will be able to check for updates and find the lollipop update.
OPTIONAL Zip file for the OTA https://docs.google.com/uc?id=0B0lhP19GCj8fVDNCeE9WZUI5ZTQ&export=download - Boot to stock recovery, press vol+ and vol- and power when at the triangle thingy, then select the zip
This method isn't the quickest if you are already on a compatible version but if your not then this will get you sorted, i spent multiple hours getting this sorted.
Credit for the mid/cid stuff goes to this thread http://forum.xda-developers.com/htc-one-m8/general/change-wwe-m8-to-dev-edition-ota-t2826567
ROOT: Either flash TWRP and let it do it's thing when u go to exit without root or flash a SuperSU Flashable ZIP!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
great guide! will this guide if altered [or not] work for cdma [Verizon] version working. thanks
Does this work if I converted to GPe earlier?
Just wanted to get one thing clear. If I have SuperCID, I don't need to change my CID to the one provided above, right?
Stupid question ahead: Will my data be whiped during the RUU flashing? Or will it just update it, with keeping everything in place. I just don't want to reinstall everything I am already S-Off and unlocked BL
mzrdisi said:
*nevermind*
Click to expand...
Click to collapse
OK
pavankvn said:
Does this work if I converted to GPe earlier?
Click to expand...
Click to collapse
I never tested on GPE device or GPE converted device sorry.
Jamal Ahmed said:
Just wanted to get one thing clear. If I have SuperCID, I don't need to change my CID to the one provided above, right?
Click to expand...
Click to collapse
Not sure try it if you want. it's not difficult to change it though.
Tilgi said:
Stupid question ahead: Will my data be whiped during the RUU flashing? Or will it just update it, with keeping everything in place. I just don't want to reinstall everything I am already S-Off and unlocked BL
Click to expand...
Click to collapse
I believe it will wipe all data including internal sd (atleast it did for me)
Not working, the Updater complains that the ID isn't a match, i updated it to the one you provided and it does NOT work.
---------- Post added at 03:02 PM ---------- Previous post was at 02:57 PM ----------
maxupp said:
Not working, the Updater complains that the ID isn't a match, i updated it to the one you provided and it does NOT work.
Click to expand...
Click to collapse
And another thing: Why do you link a Brightstar RUU? Shouldn't this be an unbranded RUU?
OP,
Please add big warning in your post about dangers of changing MID. You must specifically warn about not messing up any character in command line. :good::good:
09Ram said:
OP,
Please add big warning in your post about dangers of changing MID. You must specifically warn about not messing up any character in command line. :good::good:
Click to expand...
Click to collapse
And he should change it to Super CID to be on the safe side.
---------- Post added at 03:52 PM ---------- Previous post was at 03:35 PM ----------
Adding to my statement above:
Using the RUU posted in the OP, it is NOT possible to install the 5.0.1 update.
I just downloaded it and was informed that i cannot update because the OS has been modified.
Please remove this entire thread or update the OP to be correct.
No problem with OP, follow instructions and everything works like a charm. Wish I had known RUU's wipe internal memory though
Many, many thanks! It worked out just perfectly! There is the OTA notification, great
Well, ill try this on a different computer because after doing "fastboot oem rebootRUU", tried to run the exe file but nothing happened (it kinda installed but it closes without any warning or any confirmation) . Now im stuck at the bootloader only saying RUU. Any tips?
maxupp said:
Not working, the Updater complains that the ID isn't a match, i updated it to the one you provided and it does NOT work.
---------- Post added at 03:02 PM ---------- Previous post was at 02:57 PM ----------
And another thing: Why do you link a Brightstar RUU? Shouldn't this be an unbranded RUU?
Click to expand...
Click to collapse
Works perfectly fine, Obviously did something wrong. Brightstar RUU is unbranded. and only 1 i could find for Developer Edition.
09Ram said:
OP,
Please add big warning in your post about dangers of changing MID. You must specifically warn about not messing up any character in command line. :good::good:
Click to expand...
Click to collapse
Done!
maxupp said:
And he should change it to Super CID to be on the safe side.
---------- Post added at 03:52 PM ---------- Previous post was at 03:35 PM ----------
Adding to my statement above:
Using the RUU posted in the OP, it is NOT possible to install the 5.0.1 update.
I just downloaded it and was informed that i cannot update because the OS has been modified.
Please remove this entire thread or update the OP to be correct.
Click to expand...
Click to collapse
Super CID didn't work for me, Using the RUU in OP it work's fine, i did it myself and others confirmed it worked. Make sure you don't have a custom recovery and haven't modified the system. the screenshots in the 2nd post is from the RUU that is linked on OP the MID and CID from the OP aswell!
bazzi12 said:
No problem with OP, follow instructions and everything works like a charm. Wish I had known RUU's wipe internal memory though
Click to expand...
Click to collapse
Thanks, glad it worked, Added to OP about wiping RUU (although i did mention it in a previous post already). leave a press on the thanks if you haven't already
Tilgi said:
Many, many thanks! It worked out just perfectly! There is the OTA notification, great
Click to expand...
Click to collapse
Thanks, Glad it worked, leave a press on the thanks if you haven't already
--------------------
maxupp said:
Please remove this entire thread or update the OP to be correct.
Click to expand...
Click to collapse
ADDITIONALLY I AM NOT SOME NOOB ON XDA SO DON'T TREAT ME LIKE ONE AND INSTEAD RESPECT OTHER MEMBERS. DO NOT TELL ME WHAT TO DO! JUST CUZ IT DIDN'T WORK FOR YOU DOESN'T MEAN IT DOESN'T WORK FOR EVERYONE ELSE
diogoribeiro said:
Well, ill try this on a different computer because after doing "fastboot oem rebootRUU", tried to run the exe file but nothing happened (it kinda installed but it closes without any warning or any confirmation) . Now im stuck at the bootloader only saying RUU. Any tips?
Click to expand...
Click to collapse
disable anti-virus and run as admin. official HTC software so no risk of virus.
It worked fine for me.
Installed easily and took 5.0.1 OTA right after setup was complete.
Only problem I'm having now is that I am unable to boot TWRP through ADB to backup recovery.
After running cmd "fastboot boot TWRP.img" It downloads fine, then command says booting, but nothing happens and phone is stuck on bootloader screen. Any suggestions?
HBoot 3.19
I tried to follow your instructions and below was my result when i tried changing the MID to developer. I was on developer edition rom already, but i had the international MID. my phone is an AT&T variant. I changed MID's so x.xx.401.x stock rom would accept OTA's without a problem. i changed my MID back when i was on either 1.12 or 1.54 base, i dont remember. Now the OTA for 4.16 does not install. installing from android, it keeps saying download is corrupt. installing from recovery simply throws an unknown error. my guess is the MID being messed up. any information is greatly appreciated. in the meantime, im on 3.28 and the phone functions correctly for now at least.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.21331147A1.19_2G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.1540.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT********** [edited for obvious reasons]
(bootloader) imei: xxxxxxxxxxxxxxx [also edited]
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000n.satn tnwo ot53
amns
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
Click to expand...
Click to collapse
chevyjohn01 said:
It worked fine for me.
Installed easily and took 5.0.1 OTA right after setup was complete.
Only problem I'm having now is that I am unable to boot TWRP through ADB to backup recovery.
After running cmd "fastboot boot TWRP.img" It downloads fine, then command says booting, but nothing happens and phone is stuck on bootloader screen. Any suggestions?
Click to expand...
Click to collapse
you can't fastboot boot twrp any more you will need to fastboot flash recovery twrp.img
fma965 said:
disable anti-virus and run as admin. official HTC software so no risk of virus.
Click to expand...
Click to collapse
Well, couldnt make it work on this computer. Used another and everything went smothly, maybe i had a bad download or something on my computer was blocking the program from even starting. Thank you for your quick reply and for your amazing job i really appreciate it.
diogoribeiro said:
Well, couldnt make it work on this computer. Used another and everything went smothly, maybe i had a bad download or something on my computer was blocking the program from even starting. Thank you for your quick reply and for your amazing job i really appreciate it.
Click to expand...
Click to collapse
Great, glad you got it working hit the thanks button if you want
HTC One (M9) ReadMe ThreadEdit from the 17.08.2018: I don't know what happened exactly but it looks like a lot of the files that were hosted on AFH by me and others aren't available, anymore. Since I don't have them backed up on my laptop, anymore, I won't be able to re-upload them if AFH isn't able to recover the files. All non-working links got removed, for now.
Welcome to the HTC One (M9) ReadMe Thread. Here, you'll find some basic information (which you should read before you start flashing) and every Stock File (e.g. RUUs, TWRP backups or OTAs) that you guys contributed, so far. Besides, you'll find instructions that are needed to flash these files. Make sure that you read them, as well. HTC changed a lot with the M9 and many things you might know from older HTC devices don't apply to the M9.
Be aware that this thread relies on your contribution or it will waste away. If no one contributes any newer OTAs, TWRP backups or RUUs then chances are high that you or others might face a situation in which you can't recover your phone without having to pay for help.
This thread is located in the forum of the [GSM] international HTC One M9 (codename: hima_uhl - MID: 0PJA10000). Therefore, most (not all) of the files you can find here can only be used with GSM versions of the M9. However, much of the information in this thread applies to the other versions, as well. There are device-specific forums for every US variant of the M9. Make sure you search through them, as well, if you own one of the following models:
[GSM] AT&T/Developer Edition/Unlocked HTC One M9 (codename: hima_ul / hima_ulatt - MID: 0PJA11000)
[GSM] T-Mobile (US) HTC One M9 (codename: hima_ul / hima_ultmus - MID: 0PJA12000)
[CDMA] Sprint HTC One M9 (codename: hima_whl - MID: 0PJA20000)
[CDMA] Verizon HTC One M9 (codename: hima_wl - MID: 0PJA30000)
If you don't know the difference between GSM and CDMA you should read this article before you continue reading my thread. The article explains why you might not be able to get LTE reception with a CDMA device while using it in other countries than the US, as well.
Disclaimer:
You are aware that you use the files and guides that get provided in this thread at your own risk.
You understand and agree that neither I nor xda nor any of the authors of linked guides are responsible for any damages that might result from using the files and/or guides.
You understand that you should not use any of the files or guides if you aren't willing to take the risk.
Important Note:
You should do yourself a favour and check the MD5 sum of the files you downloaded before you flash them. This way you can make sure that the files you're using didn't get broken during the download. You can use WinMD5 (for Win 7/8.0/8.1) or File Hasher (for Win 10) for that purpose. The desired value can be found on the download site of the dedicated files. Unfortunately neither Google Drive nor Mega.nz nor MediaFire provide MD5 sums for their downloads. Therefore, you can only hope that everything went well if you downloaded a file from one of these three file hosters.
Overview
Post #3: Setting up ADB/Fastboot/HTC_Fastboot correctly
Post #4: Unlocking the Bootloader and Rooting/Installing a Custom Rom
Post #5: How to convert your M9 to a different version
Post #6: Basics about RUUs, Download Links and Instructions how to flash them
Post #7: Common RUU errors
Post #8: Basics about TWRP Backups and Instructions how to create them
Post #9: Flashing/Restoring Instructions for TWRP Backups and Download Links
Post #10: Stock Recoveries and Instructions how to flash/restore them
Post #11: Basics about OTAs, Download Links and Instructions how to install them with TWRP
Post #12: Useful links for further reading
Post #13: FAQ
Post #14: Credits
Take me back to the Overview
Setting up ADB/Fastboot/HTC_Fastboot correctlyPrerequesits:
You need Windows 7/8/8.1/10.
You need this archive. (Those files got extracted manually from HTC's RUUs.)
You need the latest 7-zip version or any other program that can handle *.zip archives.
You should've installed all needed Runtimes.
An all-in-one Installer can be found e.g. here. (The website and the installer are using the German language. Send me a link if you know an English alternative.)
The HTC USB Driver Installer is needed.
Install the HTC Sync Manager and uninstall it immediately. The Manager is known to cause problems with ADB and Fastboot. The drivers won't get affected by uninstalling the Manager.
Instructions:
Create a new folder on your desktop called "android".
Unzip the ADB/Fastboot archive into that folder. There musn't be any subfolders!
Troubleshooting:
Make sure that the HTC USB drivers are installed.
If the HTC Sync Manager is installed on your PC you should uninstall it.
Make sure that all needed Runtimes are installed.
If you aren't using the cable that came with your phone you should try the original one.
If you're using a USB 3.0 port you should try a USB 2.0 port.
If you're using a Windows 8/8.1/10 PC you should try a Windows 7 PC.
Make sure that you only try to use Fastboot/HTC_Fastboot while your phone is booted to Bootloader or Download Mode. You can't use them while the phone is booted to the normal system.
Make sure that you only try to use ADB while your phone is booted to TWRP (if installed) or to the system. You can't use ADB while the phone is booted to Bootloader or Download Mode.
Take me back to the Overview
Take me back to the Overview
Unlocking the Bootloader and Rooting the M9/Installing a Custom RomPrerequisites and important infos:
You'll need an external SD card with a size of at least 8 GB.
This guide assumes that you're using the latest 4.x firmware.
You're going to verify that with step 1 of the instructions.
You can't follow step 4 (which is optional) if you don't use at least firmware 3.x!
Check Q4 and Q5 of the FAQ section if you skip step 2 while using firmware 1.x, 2.x or 3.x since these require older TWRP and SuperSU versions than firmware 4.x. Your phone will not be able to boot to recovery mode or end in a bootloop if you don't use the correct files.
You need a working ADB/Fastboot/HTC_Fastboot environment.
You need the official TWRP 3.2.2-0.
(Optional) Read the RUU section or TWRP section II if you want to restore an untouched system image and the stock recovery after following this guide.
The instructions aren't usable with a Verizon M9 due to the bootloader unlock being blocked by Verizon. You need S-OFF for being able to unlock it. Sunshine S-OFF only works on firmware 3.x or below (Android Marshmallow and older). Alternatively, you can look for someone who owns a Java card or an XTC clip. I recomend you taking a look at the Verizon M9 forum. Chances are higher that you'll find what you need over there.
Instructions:
Boot to download mode and look at the line with "OS" at the beginning for finding out your current firmware version.
That means: Power off the device, wait some seconds and turn it on again while you keep volume down pressed until you see a black screen with red, blue and yellow text. If you see a white screen with multicoloured text then you're facing the Bootloader mode. In that case you can navigate to "Boot to Download Mode" with the volume keys and select the option with the power button.
(Optional) Install all available OTAs (via the software update function of the system settings) if you aren't using the latest 4.x firmware
Unlock your phone's bootloader via HTCdev.
Your internal storage will get wiped by doing so!
Since you already have a working ADB/Fastboot/HTC_Fastboot environment you don't need to download the android SDK from HTCdev.
(Optional) I highly recommend to follow the instructions in the TWRP section I.
Even if you don't want to share your backup with us you should at least keep it on your PC so that you're prepared if you need to revocer your phone.
Boot Download Mode, again.
Open the folder that contains your ADB/fastboot/HTC_fastboot files on your PC.
Press and hold Shift on your keyboard.
Right-click into the folder.
Choose "open command window here".
If you're using the Win 10 Creator's update or any newer version then you need to choose "open powershell window here".
Type "start cmd" without the quotation marks and execute the command with pressing Enter on your keyboard.
Use the command
Code:
fastboot flash recovery twrp-3.2.2-0-hima.img
(execute it with Enter).
Wait a bit. TWRP should get flashed on your phone.
Reboot to Bootloader Mode.
Choose "Boot to Recovery Mode".
If you want to keep the stock rom and only gain root you need to follow instruction A. If you want to install a custom rom you need to follow instruction B. (Be aware that most custom roms come pre-rooted.)
Get either SuperSU 2.79 SR3 or the latest Magisk version and copy the *.zip you chose into the download folder of your external sd card. Choose "Install" and navigate to your external sd card's download folder. Select the SuperSU/Magisk file and install it by swiping. Reboot your phone after the flash got finished. It's rooted, now.
Get the latest version of the rom you want to flash from either the android development section or the original android development section (make sure that you read all important information that got posted in the first posts of the rom thread) and copy the *.zip you chose into the download folder of your external sd card. Choose "Wipe" and wipe everything except for "Micro SDcard", "USB-OTG" and "SD-Ext" via the advanced wipe. Get back to the main menu and choose "Install" and navigate to your external sd card's download folder. Select the rom and install it by swiping. (Be aware that roms that aren't based on HTC's stock rom (e.g. LineageOS or Resurection Remix) may lack all google apps. You can download them from here. Choose the ARM64 version that corresponds to the android version of your custom rom. It doesn't matter which variant you use so choose the one that suits you best and install it via the install option after you flashed the rom. This is not needed for roms like Android Revolution, ICE, MaximusHD, Viper or Leedroid.) Reboot your phone after the flash got finished. The first boot may take a while.
(Optional) If you want you can set your phone S-OFF with the Sunshine app, now. Be aware that this is only possible on roms that are based on HTC's stock rom or the stock rom itself. More information about S-OFF can be found here.
Take me back to the Overview
Take me back to the Overview
How to convert your M9 to a different version
This guide is based on clsA's conversion guides (older one/newer one). I only updated some of the information so most of the credits go to him.
Prerequisites and important infos:
This is only possible with S-OFF and only owners of a GSM version should follow these instructions.
[*]Owners of a CDMA device may damage their phone unrecoverably by using these instructions. Read the RUU section if you want to know why.
A working ADB/Fastboot/HTC_Fastboot environment is mandatory.
Instructions:
Boot to download mode and look at the line with "OS" at the beginning for finding out your current firmware version.
That means: Power off the device, wait some seconds and turn it on again while you keep volume down pressed until you see a black screen with red, blue and yellow text. If you see a white screen with multicoloured text then you're facing the Bootloader mode. In that case you can navigate to "Boot to Download Mode" with the volume keys and select the option with the power button.
Download the RUU for the firmware you want to convert to from the RUU section.
For minimizing headaches, you should only use RUUs whose major version (1.x, 2.x, 3.x or 4.x) matches the one your phone is using.
Connect your phone via USB with your PC.
Open the folder that contains your ADB/fastboot/HTC_fastboot files on your PC.
Press and hold Shift on your keyboard.
Right-click into the folder that contains your ADB/fastboot/HTC_fastboot files.
Choose "open command window here".
If you're using the Win 10 Creator's update or any newer version then you need to choose "open powershell window here".
Type "start cmd" without the quotation marks and execute the command with pressing Enter on your keyboard.
Copy'n'paste the command
Code:
fastboot getvar all
and execute it with Enter on your keyboard.
Write down your CID and your MID on a piece of paper so that you know them in case you want to revert to the original firmware of your phone.
Change your MID using the command
Code:
fastboot oem writemid <enter MID of the RUU you want to flash>
and executing it with Enter. This might not be needed if your original MID already matches the one of the RUU you want to flash, later on.
Example for the Dev Edition RUU 3.35.617.12:
Code:
fastboot oem writemid 0PJA11000
Change your CID by using the command
Code:
fastboot oem writecid <enter CID of the RUU you want to flash>
and executing it with Enter.
Example for the Dev Edition RUU 3.35.617.12:
Code:
fastboot oem writecid BS_US002
Choose the option "reboot to download mode" on your phone.
Verify whether CID and MID got changed correctly by using the command
Code:
fastboot getvar all
and executing it with Enter.
Flash the RUU you downloaded before with one of the methods from the RUU section.
It doesn't matter which method you use.
Congrats! You sucessfully converted your M9 to a different version.
Take me back to the Overview
Take me back to the Overview
RUU SectionGeneral infos:
Rom Update Utilities (RUUs) are *.exe or *.zip files with which you can reflash the stock system and the whole firmware of your phone quite easily.
Strictly speaking only the *.exe files are RUUs (which are nothing more than a *.zip file combined with a fancy installer and HTC_Fastboot files). However, people got used to call them both RUUs and since most of the files here are *.zip files I don't want to start nitpicking.
The catch is that HTC only provides RUU.exe files for their US customers. All other RUUs which you can find in this post got leaked somehow and no one knows if or when new non-US RUUs are going to be available. That's why it might happen that non-US users can't find a publicly available RUU they could use with their phone.
S-ON Users can (in most cases) only use RUUs which have at least the same firmware version as their phone.
That means a downgrade is (in most cases) not possible with S-ON.
S-OFF Users on the other hand can use almost every RUU they want. Be aware that flashing a CDMA RUU on a GSM device and vice versa will probably lead to unrecoverable damages due to differences in their partition layout. It's not even safe to flash a CDMA RUU on your phone if the SKU of your current firmware and the one of the RUU don't match. The partition layout of the different CDMA versions differs in many cases, as well.
In addition to that, there are some RUUs on the internet which contain "combined_signed" in their naming. These RUUs are not officially signed by HTC although the files inside these archives are signed correctly. You can compare this kind of RUUs with Sneakyghost's firmware packs. The content is official but the archive itself isn't.
Due to signature checks of the M9 you probably won't be able to flash combined_signed RUUs without S-OFF if you're using firmware 1.x or 2.x.
Since HTC seems to have changed the signature check you might be able to flash 4.x combined_signed RUUs on a 4.x device even with S-ON.
I haven't found any reports (neither positive nor negative ones) about 3.x combined_signed RUUs, yet. It would be nice if a user with firmware 3.x and S-ON could confirm whether combined_signed RUUs are working on that firmware already.
All combined_signed RUUs that are linked in this post are confirmed to be working with S-ON.
S-OFF users should be aware that the phone's CID and MID need to correspond to the SKU of the RUU you want to flash. The SCID (11111111) won't make your phone ignore mismatches between those ID numbers as it did on older HTC devices.
In addition to that, you can't flash RUU.zip files with fastboot, anymore. The RUUs for the M9 are too big so that fastboot can't handle them.
A special version which got developed by HTC (HTC_Fastboot) is needed for that purpose.
In contrast to RUUs of older HTC devices M9 RUUs can get flashed with an unlocked bootloader even if the phone is S-ON.
I highly discourage everyone from (re-)locking the bootloader unless you have a working RUU at hand and know that you're able to flash it (via HTC_fastboot or an SD card if it's a *.zip). Security features of the M9 prevent the phone from booting if anything is modified and the bootloader is (re-)locked. You can't even enter TWRP, anymore, in this situation. In addition, you can't re-unlock if "OEM Unlock" (introduced with firmware 2.x) isn't activated in the developer options. You've been warned about the risks.
Important Notes:
There are several reports about downgrades being possible with S-ON in some specific cases and without the need of any additional tricks (e.g. during this conversation: Link #1, Link #2). It looks like you're able to downgrade whenever the firmware version you're currently using and the one of the RUU only differ in the numbers behind the SKU. In other words the part marked with y of x.xx.xxx.yy is allowed to differ whereas x needs to be the same for your current firmware version and the RUU (e.g. downgrades from 1.32.401.15 to 1.32.401.8 or from 3.35.401.32 to 3.35.401.12 are possible but from 1.40.401.8 to 1.32.401.15 or from 3.35.401.12 to 2.10.401.1 aren't). I've tested it myself before I set my phone S-OFF and I can confirm that it is working.
In addition it's possible to downgrade anytime if you delete the main version of your phone via dd commands, beforehand. Be aware that the tiniest mistake while using dd commands can lead to unrecoverable damages because of the nature of these commands. Due to its risks I won't be supporting that method in this thread. However, you might be able to find a thread that deals with this method if you use the forum search.
It doesn't matter which method you use but the SD card method is the recommended one since it's the most fail-safe method.
If you have a RUU.exe at hand but want to use a different flashing method you can extract the *.zip file using these instructions. Although they're a bit older they can still be used with M9 RUUs. Alternatively, you can use the Universal Decryption Tool.
HTC changed the M9's encryption keys several times:
Firmware 1.x is unencrypted
Firmware 2.x and 3.x use the "first" encryption key
Firmware 4.x uses the "second" encryption key
The consequences are that you cant flash 2.x, 3.x or 4.x RUUs if your phone is currently using a 1.x firmware and that you cant flash 4.x RUUs if your phone is currently using a 2.x or a 3.x firmware. Both, OTAs and Sneakyghost's custom firmware packs, are unencrypted. In other words, for updating your M9 you either need to flash a NoWipe/Full-Wipe Firmware Pack that contains the new encryption key beforehand (only possible with S-OFF) or you need to use the latest RUU for your SKU that uses the same encryption key as your phone. If you choose the latter you need to install the available OTAs, afterwards.
Another consequence is that downgrades from 4.x to firmware 2.x or 3.x aren't that easy, either. You need to flash a NoWipe or a Full-Wipe Firmware Pack for either firmware 2.x or 3.x before you're able to use 2.x or 3.x RUUs, again.
Downgrading to firmware 1.x should be possible without any extra steps since that firmware isn't encrypted at all.
Instructions for the SD card method:
Be aware that you need an external SD card for your phone that is not bigger than 32 gb.
The size limit doesn't apply to phones with firmware version 3.x or higher.
According to the Download Mode of firmware 4.x you should be able to use USB-OTG instead of an SD card on firmware 4.x and higher. However, I haven't tried this alternative, yet. (If someone is willing to try it I would be happy if that person could report back whether it worked or not.)
Flashing a RUU will erase all personal data on your phone! Make a backup of everything you don't want to lose before you start flashing.
Boot to download mode and look at the line with "OS" at the beginning for finding out your current firmware version.
The "firmware version" in "settings>about>software information>more" is only the base of the (custom) rom you are running and might therefore differ from the real one in the download mode.
Remember that you can always flash newer RUUs as long as they use the same encryption key as your current firmware. (c.f. the important notes in this post)
Download or extract the correct RUU.zip for your phone.
Rename the file to "0PJAIMG.zip". (Make sure that file extensions are visible so that you don't rename the file to "0PJAIMG.zip.zip"!)
Copy the file to the root directory of a SD card which is formatted to fat32. (If you're on firmware version 3.x or higher you can use an exfat formatted SD card, too.)
It looks like this is only possible if the SD card is directly connected to your PC and not put into your phone.
However, it got reported that you can copy the file while the card is put into your phone if the RUU lacks its file extension (".zip"). Don't forget to re-add the extension if you choose to delete it.
Put the card into your phone and boot to Download Mode.
You will be asked whether you want to flash the file. Confirm with the volume up button.
Your phone will reboot at least one time.
Depending on your current firmware version it may reboot to Android or the Bootloader instead of rebooting to Download Mode. If this happens you just need to manually boot it to Download Mode.
Flashing may take some time.
At the end you will be asked to push the power button. You phone will shut down if you do so.
Wait some seconds and then turn your phone on, again.
First boot may take a while.
Congrats! Your system is now stock and able to receive and install official OTAs, again.
Instructions for RUU.exe files:
Windows 7/8/8.1/10 is required.
Flashing a RUU will erase all personal data on your phone! Make a backup of everything you don't want to lose before you start flashing.
Boot to download mode and look at the line with "OS" at the beginning for finding out your current firmware version.
The "firmware version" in "settings>about>software information>more" is only the base of the (custom) rom you are running and might therefore differ from the real one in the download mode.
Remember that you can always flash newer RUUs as long as they use the same encryption key as your current firmware. (c.f. the important notes in this post)
Download the correct RUU.exe for your phone from HTC's website.
Boot your M9 to Download Mode.
Connect your phone with your PC via a USB cable.
Run the RUU.exe and follow the on-screen Instructions.
Flashing may take some time. Your phone will power off at the end.
Wait some seconds and then turn your phone on, again.
First boot may take a while.
Congrats! Your system is now stock and able to receive and install official OTAs, again.
Instructions for the ARUWizard method:
Basically, you're creating your own RUU.exe for non-US RUUs with this method.
The credits for this method go to Golv and Nikolay82.
Windows 7/8/8.1/10 is required.
Flashing a RUU will erase all personal data on your phone! Make a backup of everything you don't want to lose before you start flashing.
Boot to download mode and look at the line with "OS" at the beginning for finding out your current firmware version.
The "firmware version" in "settings>about>software information>more" is only the base of the (custom) rom you are running and might therefore differ from the real one in the download mode.
Remember that you can always flash newer RUUs as long as they use the same encryption key as your current firmware. (c.f. the important notes in this post)
Download the correct RUU.zip for your phone.
Rename the file to "rom.zip". (Make sure that file extensions are visible so that you don't rename the file to "rom.zip.zip"!)
Download and unpack this archive.
Copy the RUU into the "Wizard_RUU" folder.
Boot to Download Mode.
Connect your phone with your PC via a USB cable.
Run the ARUWizard.exe and follow the on-screen Instructions.
Flashing may take some time. Your phone will power off at the end.
Wait some seconds and then turn your phone on, again.
First boot may take a while.
Congrats! Your system is now stock and able to receive and install official OTAs, again.
Troubleshooting for RUU.exe files and the ARUWizard method:
Make sure that the HTC USB drivers are installed. Install the HTC Sync Manager if they aren't.
If the HTC Sync Manager is installed on your PC you should uninstall it. This won't affect the USB drivers.
Make sure that all needed Runtimes are installed.
If you aren't using the cable that came with your phone you should try the original one.
If you're using a USB 3.0 port you should try a USB 2.0 port.
If you're using a Windows 8/8.1/10 PC you should try a Windows 7 PC.
Try to run the RUU.exe/ARUWizard.exe as an admin if you didn't do so before.
Deactivate your PCs internet connection (this is only meant for your own safety) and disable your firewall and you antivirus program, afterwards. In some cases these programs block a RUU.exe/ARUWizard.exe.
Instructions for the HTC_Fastboot method:
Basically, you're doing manually with this method what a RUU.exe/ARUWizard is doing automatically.
A working ADB/Fastboot/HTC_Fastboot environment is mandatory.
Flashing a RUU will erase all personal data on your phone! Make a backup of everything you don't want to lose before you start flashing.
Boot to download mode and look at the line with "OS" at the beginning for finding out your current firmware version.
The "firmware version" in "settings>about>software information>more" is only the base of the (custom) rom you are running and might therefore differ from the real one in the download mode.
Remember that you can always flash newer RUUs as long as they use the same encryption key as your current firmware. (c.f. the important notes in this post)
Download the correct RUU.zip for your phone.
Copy the RUU into the folder that contains your ADB/fastboot/HTC_fastboot files on your PC.
Boot to Download Mode.
That means: Power off the phone, wait some seconds and turn it on again while you keep volume down pressed until you see a black screen with red, blue and yellow text. If you see a white screen with multicoloured text then you're facing the Bootloader mode. In that case you can navigate to "Boot to Download Mode" with the volume keys and select the option with the power button.
Connect your phone with your PC via a USB cable.
Press and hold Shift on your keyboard.
Right-click into the folder that contains your ADB/fastboot/HTC_fastboot files.
Choose "open command window here".
If you're using the Win 10 Creator's update or any newer version then you need to choose "open powershell window here".
Type "start cmd" without the quotation marks and execute the command with pressing Enter on your keyboard.
Copy'n'paste the command
Code:
htc_fastboot flash zip <enter name of the RUU.zip here>
and execute it with Enter on your keyboard.
Example for the European RUU 3.35.401.12:
Code:
htc_fastboot flash zip 0PJAIMG_HIMA_UHL_M60_SENSE70_HTC_Europe_3.35.401.12_Radio_01.01_U11440792_97.00.51203G_F_release_signed.zip
Some firmware files will get flashed and you'll face error 90. Don't panic! This is completely normal and has already been like this for several older HTC devices.
Execute the flashing command a second time.
Flashing may take some time. Your phone will power off at the end.
Wait some seconds and then turn your phone on, again.
First boot may take a while.
Congrats! Your system is now stock and able to receive and install official OTAs, again.
Download Links:
Sidenote: The SKU is part of your firmware version and located between the second and the third dot. Example: If 3.35.401.12 is your current firmware then you need to look for RUUs with SKU 401.
GSM RUUs
codename: hima_uhl - MID: 0PJA10000
SKU: 401 - CID: HTC__001, HTC__J15, HTC__102, HTC__Y13, HTC__A07, HTC__032, HTC__016, HTC__M27, HTC__002 or HTC__031
1.32.401.8
1.32.401.15
1.40.401.8
2.10.401.1
3.35.401.12
4.14.401.7 (MD5: 148A8AF99EBDC7B26B4B14C09179D6E0)
4.28.401.3
SKU: 708 - CID: HTC__622 or HTC__044
1.32.708.15
SKU: 709 - CID: HTC__621
1.36.709.3
1.40.709.8
2.10.709.1
3.36.709.3
4.16.709.3
4.30.709.12
SKU: 710 - CID: HTC__039, TELNZ001, OPTUS001 or VODAP021
2.9.710.2
2.9.710.5
3.50.710.1
4.23.710.1
SKU: 111 - CID: T-MOB101
1.32.111.6
1.40.111.8
2.10.111.6
3.35.111.14
SKU: 118 - CID: T-MOB009
3.35.118.12
SKU: 161 - CID: VODAP001, VODAP102, VODAP304, VODAP405, VODAPE17 or VODAPD18
1.32.161.7
1.40.161.8
2.10.161.7
3.35.161.12
4.17.161.11
SKU: 206 - CID: O2___001 or O2___102
1.32.206.6
1.32.206.15
1.40.206.8
3.35.206.13
SKU: 771 - CID: H3G__001, H3G__106, H3G__402 or H3G__G04
1.32.771.15
3.35.771.12
SKU: 61 - CID: ORANG001
4.19.61.1
SKU: 73 - CID: ORANG202
3.35.73.14 (MD5: 1d829788af3fa566a4aab70cc547707b)
SKU: 841 - CID: TELST001
2.9.841.5
4.23.841.1
codename: hima_ul / hima_ulatt - MID: 0PJA11000
SKU: 617 - CID: BS_US001 or BS_US002
1.32.617.6
1.32.617.30
2.11.617.15
3.35.617.12
3.35.617.16
3.35.617.21
3.35.617.31
4.16.617.6
4.19.617.1
4.23.617.1
4.27.617.2
4.30.617.2
4.30.617.12
SKU: 502 - CID: CWS__001
1.32.502.9
1.32.502.31
2.6.502.16
2.11.502.18
3.38.502.41
4.27.502.7
SKU: 599 - CID: HTC__332
2.11.599.21
SKU: 600 - CID: HTC__332
1.27.600.1
SKU: 631 - CID: ROGER001
3.38.631.2
SKU: 661 - CID: TELUS001
2.11.661.2
3.40.661.2
SKU: 1500 - CID: GLOBA001
3.38.1500.2
SKU: 1530 - CID: VIDEO001
2.11.1530.180
codename: hima_ul / hima_ultmus - MID: 0PJA12000
SKU: 531 - CID: TMOB010
3.39.531.12
3.39.531.41
4.27.531.6
codename: hima_uhl - MID: 0PJA13000
SKU: 425 - CID: HTC__058 or HTC__059
2.11.425.6
CDMA RUUs
codename: hima_whl - MID: 0PJA20000
SKU: 651 - CID: SPCS_001
2.11.651.19
3.41.651.41
4.27.651.4
SKU: 510 - CID: ACG__001
2.11.510.16
codename: hima_wl - MID: 0PJA30000
SKU: 605 - CID: VZW__001
3.10.605.7
SKU: 512 - CID: LRA__001
2.6.512.14
Other RUU Collections
Some more (but older) RUUs can be found on AndroidRUU
Take me back to the Overview
Take me back to the Overview
Common RUU Errors
This List is based on 5m4r7ph0n36uru's list in his HTC 10 De-branding guide. I only changed some phrasings so most credits go to him.
07 RU_CID_FAIL: Your phone’s CID doesn't match the one that the RUU expects (c.f. its android-info.txt).
10 RU_MODELID_FAIL: Your phone’s MID doesn't match the one that the RUU expects (c.f. its android-info.txt). You might be trying to flash a RUU for a completely different device if you face this problem.
12 SIGNATURE FAIL: The phone expects an HTC signature and can't find one or found a wrong one. This error occurs if you try to flash a RUU that uses a different encryption key than the one your phone is using (e.g. firmware 3.x and older vs. 4.x).
22 RU_HEADER_ERROR: Something is wrong with your *.zip. Check the MD5 sum of the downloaded file.
23 PARSING IMAGE FAIL: Something is wrong with the image(s) within the *.zip.
24 ANDROID-INFO FAIL: Something is wrong with android-info.txt within the *.zip.
32 HEADER ERROR: The *.zip couldn't be read and unzipped properly. This seems to be the same as error 22.
33 NOT KNOWN YET: This might indicate a hardware failure.
35 FAILED (remote: 35 RU_PARTITION_NOT_SUPPORT <PartitionName>): This means you can’t flash an image in Download Mode as it has to be done in Bootloader Mode.
41 WRONG MODEL ID: Seems to be the same as error 10.
42 WRONG CUSTOMER ID: Seems to be the same as error 07.
90 PRE-UPDATE FAIL: The RUU only flashed the aboot and you have to re-run the process immediately to flash all other partitions. HTC_fastboot auto-reboots on error 90.
99 RU_UNKOWN_FAIL terrible mishap: This error often occurs if you're using a broken SD card for the SD card method.
130 WRONG MODEL ID: Seems to be the same as error 10.
132 SIGNATURE ERROR: Seems to be the same as error 12.
155 INDICATES DIFFERENT THINGS:
You need to relock the bootloader on a device with S-ON. (This only applies to devices that are older than the M9!)
The RUU cannot be executed because your phone is S-ON and its Rom and/or Firmware version is newer than the one of the RUU.
170 CHECK USB: The RUU won’t run because ADB isn't working properly.
171 USB ERROR: This can happen when a RUU reboots the phone to Download Mode. For some reasons the device is losing its connection making a RUU flash virtually impossible. There is an incompatibility between USB 3/3.1 and Fastboot/ADB, as well as an issue with the Windows Device Detection on some Windows 10 builds. (According to Sneakyghost, there seems to be a fix for this, though.)
255: This error often occurs if you're using a broken SD card for the SD card method.
Take me back to the Overview
Take me back to the Overview
TWRP Backup Section IGeneral Infos:
TWRP Backups can be used for getting back to stock if there is no RUU availabe you could use for the same purpose.
However, the TWRP Backup needs to contain the Boot Image, the Stock Recovery and a System Image that has never been mounted as read/write. If a backup only contains the needed Boot Image and the System Image you'll need to reflash the Stock Recovery manually, afterwards.
You should always check whether a RUU or a TWRP backup for your current firmware version is available before you start flashing.
If neither is available you need to create your own backup using the instructions in this post. (And hopefully you're going to upload it afterwards so that it can be shared with us. )
Important Notes:
Check whether we already have a backup for your current firmware in TWRP section II before you start uploading your own. Otherwise, you might waste your time since there is no need for more than one publicly available backup per firmware version.
Instructions:
Windows 7/8.0/8.1/10 is required.
You need an unlocked bootloader. Aside from that the M9 needs to be completely stock.
The instructions only work on firmware version 3.x or 4.x. Older firmware versions aren't able to boot to TWRP without flashing it in Download Mode.
The latest 7-zip version is needed.
The offical TWRP 3.2.2-0 version is needed.
An exfat-formatted SD card for your phone (at least 8 GB) is needed, as well. Use your PC for formatting.
A working ADB/Fastboot/HTC_Fastboot environment is mandatory.
Connect your M9 with your PC using a USB cable.
Boot to Bootloader Mode. NOT Download Mode.
That means: Power off the device, wait some seconds and turn it on again while you keep both volume buttons pressed until you see a white screen with multicoloured text. If you see a black screen with red, blue and yellow text then you're facing the download mode. In that case you can navigate to "reboot to bootloader" with the volume keys and select the option with the power button.
Open the folder that contains your ADB/fastboot/HTC_fastboot files on your PC.
Press and hold Shift on your keyboard.
Right-click into the folder.
Choose "open command window here".
If you're using the Win 10 Creator's update or any newer version then you need to choose "open powershell window here".
Type "start cmd" without the quotation marks and execute the command with pressing Enter on your keyboard.
Use the command
Code:
fastboot boot twrp-3.2.2-0-hima.img
(execute it with Enter on your keyboard).
Wait a bit. TWRP should boot on your M9 after some minutes.
DO NOT SWIPE! Choose "keep system mount read-only".
Open the Backup menu.
Backup "Boot", "System Image" and "Recovery" on the external SD card.
Copy the Backup (the whole folder - not only the files inside of the folder) to your PC.
Rename the Backup folder according to the firmware version of your phone. Example: Stock_Backup_4.14.401.7
Righ-click onto the Backup folder.
Choose "7-zip>add to an archive".
Choose "ok".
Upload the archive to a free filehoster like AFH.
AFH is recommended since it's free and states the MD5 sum of the uploaded files. This way you can check whether the file got damaged during the upload or not. In addition, others can verify whether the file got damaged during their download.
Post the download link here in this thread.
Take me back to the Overview
Take me back to the Overview
TWRP Backup Section II
Important Notes:
These Instructions got originally written for my Google sheet and my own backups. However, they can be used with every TWRP Backup that contains a System Image that has never been mounted as read/write, the corresponding Boot Image and the corresponding Stock Recovery.
If a backup lacks the corresponding Stock Recovery you might need to flash it manually.
On the other hand, if you want to keep TWRP you mustn't restore "Recovery".
Be aware that it's possible to flash OTAs with TWRP if you are at least on firmware 3.x and using at least the official TWRP version 3.1.0-0. For more information read the OTA section.
If you can't fulfill these two requirements you need to restore the Stock Recovery and an untouched System Image (e.g. with the instructions in this post) for being able to receive/install OTAs. Otherwise any Update will fail since Google introduced Block-based OTAs with android 5.
Instructions:
Be aware that you need an external SD card for your phone. In contrast to the RUU method, there is no size limit for the card if you want to restore a Backup.
There is no need to lock or re-lock the bootloader if you use this method.
If you follow my instructions all your personal data will be erased so backup everything that is important (e.g. contacts, messages, pictures, etc.)!
Format your SD card with a PC to exfat and put it back into your phone.
Boot to TWRP.
Create a backup on your external SD card.
Backing up "Boot" is more than enough. We only want TWRP to create the needed directories on your SD card.
Download the correct backup for your firmware version.
Boot to Download Mode. It is stated in the line with "OS" at the beginning. The "firmware version" in "settings>about>software information>more" is only the base of the (custom) rom you are running.
In contrast to RUUs, you mustn't use TWRP backups that are newer than your current firmware.
Unzip the downloaded backup.
Copy the unzipped backup folder to "TWRP/BACKUPS/<YourSerialnumber>/"on your SD card.
Sometimes this is only possible if the SD card is directly connected to your PC and not put into your phone. I don't know why some M9s refuse the copy process.
I recommend wiping everything except "Micro SDcard", "USB-OTG" and "SD-Ext".
Check the "Mount system as read-only" box in the Mount menu.
Restore the backup.
Boot to system (ignore the warning that no OS is installed). This process may actually take a while!
Congrats! Your system is now stock and able to receive and install official OTAs, again.
Download Links:
Sidenote: The SKU is part of your firmware version and located between the second and the third dot. Example: If 3.35.401.12 is your current firmware then you need to look for Backups with SKU 401.
GSM Backups
codename: hima_uhl - MID: 0PJA10000
SKU: 401 - CID: HTC__001, HTC__J15, HTC__102, HTC__Y13, HTC__A07, HTC__032, HTC__016, HTC__M27, HTC__002 or HTC__031
1.32.401.8
1.32.401.15
1.32.401.17
1.40.401.8 (Alternative Backup)
2.10.401.1 (Alternative Backup #1)
2.10.401.180
3.35.401.12 (Alternative Backup #1)
4.14.401.7
4.28.401.3
SKU: 708 - CID: HTC__622 or HTC__044
1.32.708.15
2.11.708.27 (Alternative Backup #1)
3.42.708.3
SKU: 709 - CID: HTC__621
2.10.709.1
3.36.709.3
4.16.709.3
SKU: 710 - CID: HTC__039, TELNZ001, OPTUS001 or VODAP021
4.23.710.1
SKU: 111 - CID: T-MOB101
1.32.111.15
2.10.111.6
3.35.111.14
SKU: 161 - CID: VODAP001, VODAP102, VODAP304, VODAP405, VODAPE17 or VODAPD18
1.32.161.7
2.10.161.7
2.10.161.180
3.35.161.12
4.17.161.11
SKU: 206 - CID: O2___001 or O2___102
2.10.206.2
2.10.206.180
3.35.206.13
SKU: 771 - CID: H3G__001, H3G__106, H3G__402 or H3G__G04
3.35.771.12
SKU: 73 - CID: ORANG202
1.40.73.3
2.10.73.3
3.35.73.14
SKU: 75 - CID: ORANG309
1.32.75.15
2.10.75.2
3.35.75.14
SKU: 1020 - CID: HTC__247
1.32.1020.15
1.40.1020.8
2.10.1020.2
3.35.1020.12
codename: hima_ul / hima_ulatt - MID: 0PJA11000
SKU: 617 - CID: BS_US001 or BS_US002
2.11.617.15
3.35.617.12
4.27.617.2
SKU: 502 - CID: CWS__001
2.6.502.18
codename: hima_ul / hima_ultmus - MID: 0PJA12000
SKU: 531 - CID: TMOB010
4.27.531.6
codename: hima_uhl - MID: 0PJA13000
none contributed to this thread, so far
CDMA Backups
codename: hima_whl - MID: 0PJA20000
none contributed to this thread, so far
codename: hima_wl - MID: 0PJA30000
none contributed to this thread, so far
Other Backup Collections
Back to Stock Files for Canadian Users
Take me back to the Overview
Take me back to the Overview
Stock Recovery SectionImportant Notes:
Things you might know from older HTC devices don't apply to the M9 since google introduced Block-based OTAs with android 5.
In other words: You can't install OTAs if you simply un-root and re-flash the Stock Recovery of your current firmware. Further information can be found in the OTA section.
Many of the TWRP Backups in this thread already contain the corresponding Stock Recovery.
However, if you need to restore a Backup that lacks the Stock Recovery you can use the instructions in this post for restoring/flashing it. It doesn't matter which method you choose.
Use the Universal Decryption Tool if you want to extract a Stock Recovery from a RUU.zip or a RUU.exe file.
Instructions for flashing the Stock Recovery via TWRP:
You'll need an external SD card. There is no size limit and it doesn't matter whether the card is formatted to fat32 or exfat.
Boot to TWRP.
Download the correct Stock Recovery for your firmware version.
Boot to Download Mode. The firmware version is stated in the line with "OS" at the beginning. The "firmware version" in "settings>about>software information>more" is only the base of the (custom) rom you are running.
Copy the Stock Recovery to the root/main directory on your SD card.
Sometimes this is only possible if the SD card is directly connected to your PC and not put into your phone. I don't know why some M9s refuse the copy process.
Choose "Install" in the TWRP main menu.
Choose "Install Image" at the bottom of the screen.
Choose the Stock Recovery and install it by swiping the slider.
Congrats! TWRP will be replaced with the Stock Recovery as soon as you reboot your device.
Instructions for restoring the Stock Recovery via TWRP:
You'll need an external SD card. There is no size limit and it doesn't matter whether the card is formatted to fat32 or exfat.
Step 2 can be skipped if the directories already exist on your SD card.
Boot to TWRP.
Create a backup on your external SD card.
Backing up "Boot" is more than enough. We only want TWRP to create the needed directories on your SD card.
Create a folder on your desktop and rename it to "Stock Recovery".
Download the correct Stock Recovery for your firmware version and copy it into the "Stock Recovery" folder.
Boot to Download Mode. The firmware version is stated in the line with "OS" at the beginning. The "firmware version" in "settings>about>software information>more" is only the base of the (custom) rom you are running.
Rename the Stock Recovery to "recovery.emmc.win". (Make sure that file extensions are visible so that you don't rename the file to "recovery.emmc.win.img"!)
Copy the "Stock Recovery" folder to "TWRP/BACKUPS/<YourSerialnumber>/" on your SD card.
Sometimes this is only possible if the SD card is directly connected to your PC and not put into your phone. I don't know why some M9s refuse the copy process.
Restore the Stock Recovery.
Congrats! TWRP will be replaced with the Stock Recovery as soon as you reboot your device.
Instructions for flashing the Stock Recovery via Fastboot:
A working ADB/Fastboot/HTC_Fastboot environment is mandatory.
Download the correct Stock Recovery for your firmware version.
Boot to Download Mode. The firmware version is stated in the line with "OS" at the beginning. The "firmware version" in "settings>about>software information>more" is only the base of the (custom) rom you are running.
Copy the Stock Recovery into the folder that contains your ADB/fastboot/HTC_fastboot files on your PC.
Boot to Download Mode.
That means: Power off the phone, wait some seconds and turn it on again while you keep volume down pressed until you see a black screen with red, blue and yellow text. If you see a white screen with multicoloured text then you're facing the Bootloader mode. In that case you can navigate to "Boot to Download Mode" with the volume keys and select the option with the power button.
Connect your phone with your PC via a USB cable.
Press and hold Shift on your keyboard.
Right-click into the folder that contains your ADB/fastboot/HTC_fastboot files.
Choose "open command window here".
If you're using the Win 10 Creator's update or any newer version then you need to choose "open powershell window here".
Type "start cmd" without the quotation marks and execute the command with pressing Enter on your keyboard.
Copy'n'paste the command
Code:
fastboot flash recovery <enter name of the Stock Recovery here>
and execute it with Enter on your keyboard.
Example for the European 3.35.401.12 Recovery:
Code:
fastboot flash recovery 3.35.401.12-recovery-signed.img
Congrats! TWRP got replaced with the Stock Recovery.
Download Links:
Sidenote: The SKU is part of your firmware version and located between the second and the third dot. Example: If 3.35.401.12 is your current firmware then you need to look for Recoveries with SKU 401.
GSM Stock Recoveries
codename: hima_uhl - MID: 0PJA10000
SKU: 401 - CID: HTC__001, HTC__J15, HTC__102, HTC__Y13, HTC__A07, HTC__032, HTC__016, HTC__M27, HTC__002 or HTC__031
1.32.401.8
1.32.401.15
1.32.401.17
2.10.401.1
3.35.401.12
3.35.401.32
4.14.401.7
4.28.401.3 (MD5: 7673341F17568DDA0810C1CA68D580CB)
SKU: 708 - CID: HTC__622 or HTC__044
2.11.708.27
3.42.708.2
SKU: 709 - CID: HTC__621
3.36.709.3
SKU: 710 - CID: HTC__039, TELNZ001, OPTUS001 or VODAP021
4.23.710.1
SKU: 111 - CID: T-MOB101
1.32.111.6
1.32.111.15
3.35.111.14
SKU: 161 - CID: VODAP001, VODAP102, VODAP304, VODAP405, VODAPE17 or VODAPD18
1.32.161.7
1.32.161.15
2.10.161.7
3.35.161.12
4.17.161.11
SKU: 206 - CID: O2___001 or O2___102
1.32.206.6
2.10.206.2
3.35.206.13
SKU: 73 - CID: ORANG202
3.35.73.14 (MD5: 1c141f3d906ea535b9682cc73889615c)
4.23.73.1 (MD5: 819514486aca4101725ccedf1c501908)
codename: hima_ul / hima_ulatt - MID: 0PJA11000
SKU: 617 - CID: BS_US001 or BS_US002
1.32.617.6
1.32.617.30
2.8.617.4
3.35.617.12
4.14.617.6
4.19.617.1 (MD5: 49B8AA1F027E32B3615B44E492E94F9B)
4.23.617.1 (MD5: E1AFEA5C70BA0C7B5FC3C15F860BE0C6)
4.27.617.2 (MD5: 06750D1CD2F17ADE1567DCA9AB5DFD8C)
SKU: 502 - CID: CWS__001
1.32.502.31
3.38.502.17
codename: hima_ul / hima_ultmus - MID: 0PJA12000
none contributed to this thread, so far
codename: hima_uhl - MID: 0PJA13000
none contributed to this thread, so far
CDMA Stock Recoveries
codename: hima_whl - MID: 0PJA20000
none contributed to this thread, so far
codename: hima_wl - MID: 0PJA30000
none contributed to this thread, so far
Take me back to the Overview
Take me back to the Overview
OTA SectionGeneral Infos:
The OTAs (Over The Air Updates) in this section are *.zip archives provided by HTC which are needed for updating the stock rom and the firmware of your HTC One M9. Normally you would download them via "settings>about>software updates".
OTAs are incremental. That means you can't directly update to the latest firmware if your phone is two or more versions older than the latest version. You'll need to install each update that ever got distributed.
Prerequisites for being able to install them (if you're using firmware 1.x or 2.x) are a completely unmodified System partition which has never been mounted as read/write and the corresponding Stock Recovery.
In other words: You aren't able to install an OTA if you simply un-root your phone and re-flash the Stock Recovery.
You can either restore one of the TWRP Backups or flash a RUU for restoring your System partition. Make sure that you follow the instructions in the dedicated sections.
Thanks to @nkk71 and @Captain_Throwback you can install OTAs with TWRP if you're at least using firmware 3.x and the official TWRP version 3.2.2-0.
The needed information/instructions can be found here and here.
Be aware that even on firmware 3.x and newer a completely unmodified System partition is a must-have if you want to install an OTA.
Important Notes:
It's always safer to update via "settings>about>software updates".
The worst thing that might happen in that case is that the OTA aborts. If you manually flash an OTA with S-ON and the flash fails you might end up with a non-booting phone. In addition you won't be able to use RUUs for the firmware version that has been installed on your phone before you started flashing the OTA. If you're unlucky there might not be a RUU for the newer firmware version and you can't recover your phone without having to pay for help.
Things you might know from older HTC devices don't apply to the M9 since google introduced Block-based OTAs with android 5.
If you want to contribute OTAs and don't know how to extract them you might want to check out this guide.
Although it's written for the HTC 10 its instructions can be used with the M9, as well.
Re-uploading OTA files isn't needed. Just post HTC's download link in this thread.
Be aware that there have been several reports that it's not possible to receive/install OTAs while using the SuperCID (11111111). So make sure you use a CID that corresponds to the OTA you want to install.
There is no need for (re-)locking the bootloader if you want to install OTAs. I actually discourage everyone from getting back to a (re-)locked state.
Read the warning I posted in the RUU section for further information.
Download Links:
Sidenote: The SKU is part of your firmware version and located between the second and the third dot. Example: If 3.35.401.12 is your current firmware then you need to look for OTAs with SKU 401.
GSM OTAs
codename: hima_uhl - MID: 0PJA10000
SKU: 401 - CID: HTC__001, HTC__J15, HTC__102, HTC__Y13, HTC__A07, HTC__032, HTC__016, HTC__M27, HTC__002 or HTC__031
1.32.401.6 -> 1.32.401.15
1.32.401.8 -> 1.32.401.15
1.32.401.15 -> 1.32.401.17
1.32.401.15 -> 1.40.401.8
1.40.401.8 -> 2.10.401.1
2.10.401.1 -> 2.10.401.180
2.10.401.180 -> 3.35.401.12
3.35.401.12 -> 3.35.401.32
3.35.401.32 -> 4.14.401.7
4.14.401.7 -> 4.28.401.3 (Alternative Download #1)
SKU: 708 - CID: HTC__622 or HTC__044
1.32.708.15 -> 1.40.708.9
1.40.708.9 -> 2.11.708.27
2.11.708.30 -> 2.11.708.180
2.11.708.180 -> 3.42.708.3
3.42.708.3 -> 4.27.708.3
SKU: 709 - CID: HTC__621
1.36.709.3 -> 1.40.709.4
1.40.709.4 -> 1.40.709.8
1.40.709.8 -> 2.10.709.1
2.10.709.180 -> 3.35.709.3
3.35.709.3 -> 4.16.709.3
4.16.709.3 -> 4.30.709.12
SKU: 710 - CID: HTC__039, TELNZ001, OPTUS001 or VODAP021
1.32.710.7 -> 1.32.710.16
SKU: 111 - CID: T-MOB101
3.35.111.14 -> 4.18.111.2
SKU: 161 - CID: VODAP001, VODAP102, VODAP304, VODAP405, VODAPE17 or VODAPD18
1.32.161.7 -> 1.32.161.15
1.40.161.8 -> 2.10.161.7
2.10.161.180 -> 3.35.161.12
3.35.161.12 -> 4.17.161.11
SKU: 206 - CID: O2___001 or O2___102
1.32.206.6 -> 1.32.206.15
1.40.206.8 -> 2.10.206.2
SKU: 771 - CID: H3G__001, H3G__106, H3G__402 or H3G__G04
3.35.771.12 -> 4.30.771.2
SKU: 73 - CID: ORANG202
1.32.73.6 -> 1.32.73.15
1.32.73.15 -> 1.40.73.8
1.40.73.8 -> 2.10.73.3
2.10.73.180 -> 3.35.73.14
3.35.73.14 -> 4.23.73.1 (MD5: 69636c632a5d1fa9ecc03e9f22e64e93)
SKU: 75 - CID: ORANG309
1.32.75.15 -> 1.40.75.8
1.40.75.8 -> 2.10.75.2
12.10.75.180 -> 3.35.75.14
SKU: 1020 - CID: HTC__247
1.32.1020.15 -> 1.40.1020.8
1.40.1020.8 -> 2.10.1020.2
2.10.1020.180 -> 3.35.1020.12
SKU: 841 - CID: TELST001
2.9.841.5 -> 2.10.841.200
2.10.841.200 -> 3.38.841.6
3.38.841.6 -> 4.23.841.1
codename: hima_ul /hima_ulatt - MID: 0PJA11000
SKU: 617 - CID: BS_US001 or BS_US002
1.32.617.6 -> 1.32.617.30
1.32.617.30 -> 2.8.617.4
2.8.617.4 -> 2.11.617.15
2.11.617.15 -> 2.11.617.180
3.35.617.21 -> 3.35.617.31
3.35.617.31 -> 4.14.617.6
4.14.617.6 -> 4.19.617.1
4.23.617.1 -> 4.27.617.2
SKU: 669 - CID: SASKT001
3.38.669.2 -> 4.19.669.1
codename: hima_ul / hima_ultmus - MID: 0PJA12000
none contributed to this thread, so far
codename: hima_uhl - MID: 0PJA13000
none contributed to this thread, so far
CDMA OTAs
codename: hima_whl - MID: 0PJA20000
none contributed to this thread, so far
codename: hima_wl - MID: 0PJA30000
none contributed to this thread, so far
Take me back to the Overview
Take me back to the Overview
Useful Links/Further Reading
Basics about Block-based OTAs
How to "read" Firmware versions
SKU-, CID- and MID-List by Sneakyghost and Behold_this
How to "read" Serialnumbers
The Difference between Rom and Firmware
(this is an archive.org link - the original article isn't available anymore due to the Team Venom website being shut down)
Sneakyghost's Firmware Thread
This thread actually contains a lot of useful information about the firmware, CIDs, MIDs and S-OFF - you can find Full Wipe and NoWipe firmware packs in this thread, as well
Captain_Throwback's TWRP Thread
How to recover the 3 GB internal storage that get lost while getting S-OFF
Instructions are not needed if you choose to flash a RUU after getting S-OFF
My "famous" Google sheet
Recovery Flashable Radio Files
Sunshine S-OFF
If you don't own a Java Card or an XTC Clip, this is the only method for getting S-OFF at the moment!
Llabtoofer's RUU Service
The last hope if there is no publicly available RUU you could use!
Universal HTC RUU/Rom Decryption Tool
Country-/Continent-specific threads
Australia
Canada
India
Take me back to the Overview
Take me back to the Overview
FAQ Section
Q1: Everytime I flash a custom rom/restore a TWRP backup I lose my IMEI and my mobile reception and my phone stops recognizing my sim card. What's the reason for this?
A: You probably flashed a custom rom that is based on firmware 3.35.x although the firmware of your phone is 3.y (with y being any other number than 35). The boot image of 3.35.x based roms is not compatible with your firmware version. The solution of the problem depends on the question whether you are trying to install a Sense-based rom (like ICE or ViperOneM9) or a non-Sense-based rom (like CM): For Sense-based roms you just need to re-flash the stock boot image of your current firmware version. For non-Sense-based roms you need to flash thicklizard's custom kernel. There have been some reports, that this boot.img "trick" for Sense-based roms doesn't work with firmware 4.x, anymore. In addition, you might face this problem, as well, if you flash a 3.x based rom/restore a 3.x based backup and your phone is currently using a 4.x firmware.
Q2: You mentioned the term SKU several times. What is that?
A: The SKU contains between two and four digits and is part of the firmware version (x.xx.SKU.xx). It indicates which variant of the firmware you're using. Read Sneakyghost's and Behold_this' SKU-, CID- and MID-List if you want to know the meaning of a specific SKU.
Q3: I've always been looking at the CID and the MID of my HTC phones if I wanted to know which RUU I should use. Wouldn't that be easier than booting to Download Mode and looking at the line with "OS" at the beginning?
A: No, it wouldn't. If you only know the CID and the MID you still need to guess the correct RUU. If you boot to Download Mode and look at your current firmware version you know exactly which RUU you're looking for. Just look at the naming of the RUUs and you'll find out that it contains the firmware version a RUU corresponds to.
Q4: Which versions of TWRP and SuperSU are the recommended ones?
A: The answer depends on your current firmware version. If you're using firmware 4.x then you'll find your answer here in the FAQ of the TWRP thread. (Click here, if you can't find SuperSU 2.79 SR3. Version 2.79 SR1 doesn't seem to be available, anymore.) For firmware 1.x and 2.x the recommended versions are Captain_Throwback's Beta 1 of TWRP 2.8.7.1 and SuperSU 2.49. For firmware 3.x the recommended versions are TWRP 3.2.2-0 (official) and SuperSU 2.65. Using different versions than the recommended ones will probably lead to a bootloop. The M9 isn't compatible with the ramdisk changes that get executed by many flashable system-less SuperSU versions. However, updating the SuperSU app and its binaries via the Play Store after flashing one of the older versions is safe.
Q5: Are there alternative methods for gaining root?
A: Yes, you can use Magisk if you're using firmware 4.x. (Maybe a user with a lower firmware version can test whether Magisk is usable on firmware 1.x to 3.x, as well?)
Q6: I ignored Q4 and now my phone is bootlooping. How can I fix it?
A: You need to reflash the stock boot.img of your current firmware. If a backup for your version is available in this thread or if you made your own backup before flashing SuperSU you can use the instructions in TWRP section II for that purpose. Be aware that you don't need to wipe anything and that restoring "Boot" is sufficent. If this thread lacks a backup for your version and you didn't backup your stock system, either, you'll need to flash a RUU. If neither a backup nor a RUU are available you'll need to contact Llabtoofer's RUU Service.
Q7: I tried to unzip the RUU.zip files that you linked here and got an error! Looks like they're broken! Re-upload them!
A: Strictly speaking, this is not a question. However, such a situation happened that often that I have to add this point to the FAQ, as well. The RUUs are not broken. They are encrypted and not meant to get unzipped. Most unzipping programs can't open them due to the encryption. Use the Decryption Tool if you want to get one of the firmware files that are located in a specific RUU.
Q8: My Dowloand Mode is broken. How can I fix it?
A: The answer is a bit tricky. There seem to be two different states of a broken Download Mode: a Bluescreen and a black one with the red failed to boot to download mode. In addition to the black error screen, the bootloader shows a security warning and that the software status is modified if you boot to the Bootloader. According to this post you can recover the Bluescreen if you have S-OFF. However, users reported that they could flash the files with S-ON, as well. Nevertheless, I've never faced such a situation with my own M9 and therefore can't say who's right and who isn't. On the other hand, the black screen seems to be caused by a broken EMMC. (Remember that the M9 uses the SD810 processor which runs quite hot depending on your usage. All models from all OEMs that use this processor suffer from the hardware damages that result from the heat.) I therefore doubt that this variant of the broken Download Mode can get recovered without HTC's help. In other words: If you face this so called "dead nand issue" you need to send your phone to HTC's repair service if you want to keep it.
Q9: Whenever I connect my phone via USB with my PC it gets recognised as HS-USB QDLoader. How can I fix that?
A: Looks like you hardbricked your phone. This state already existed on older HTC phones. You need a JTAG device (like a RIFF Box) and the knowledge for using it if you want to recover your phone. I have neither. However, you can find further information in the fifth post of Sneakyghost's firmware thread.
Q10: I flashed a custom rom. TWRP stated the flash was successful but the rom doesn't boot. What's wrong?
A: This can happen if your phone's firmware is outdated. Get back to stock and install all available OTAs. You can flash a newer RUU (if one with a newer firmware version of your phone's SKU is available) for saving some time that would otherwise be needed for installing OTAs. Further information can be found in the RUU section.
Q11: I bought a M9 and I have no clue which variant it is. Is there a way for finding out the (original) MID whithout having to use a PC?
A: Yes, there is. Look at the bottom of the backside of your M9. There is a small engraving: Model 0PJA***. The part with the *** differs according to the variant you own. The explanation for the MIDs can be found in the opening post of this thread. Be aware that the MIDs from fastboot getvar (which I used in the opening post) have two additional zeros in comparison with the engraving. In addition, the MID from fastboot getvar may differ completeley from the engraving if the phone got converted to a different version.
Unfortunately, more and more people tend to replace the housing of their phone since the original one got damaged. The problem is that those people don't care whether the replacement housing got made for the variant they own or not. This leads to so called frankenphones which consist of parts that originally belonged to more than one variant of the One M9 (e.g. a hima_whl phone in a housing with the 0PJA100 engraving of the hima_uhl variant).
Q12: I try to enter the Stock Recovery but all I see is a red triangle and then my phone reboots. Is my phone broken?
A: No it isn't. That triangle is the Stock Recovery. HTC added this auto-reboot as a security feature so that you don't accidently factory-reset your phone. As soon as you choose "Reboot to Recovery Mode" you need to press and hold the power button. When you see the triangle you need to shortly press volume up while the power button is still pressed. The recovery's menu should appear now.
Q13: Your opening post states that the Verizon and the Sprint variants are CDMA devices. However, mine is using a SIM card so it must be a GSM device, correct?
A: No, it's still a CDMA device and as mentioned before, flashing a GSM RUU/firmware on a CDMA device may lead to unrecoverable damages. You need to be aware of the fact, that LTE is a GSM technology. Therefore, CDMA devices/carriers need to support some LTE-GSM frequencies and SIM cards if they want support LTE connections. Nevertheless, most slower connections are still based on the CDMA network of Verizon/Sprint.
Since CDMA networks are only available in the US, many people who need(ed) to travel to other countries preferred to buy GSM devices so that they are/were still able to use their phones abroad. To circumvent this loss of customers CDMA carriers started to support some GSM frequencies for G and 3G connections with their phones. That's why you might be able to use a CDMA M9 on some GSM networks but that neither means that it can be used on any GSM network nor that you can get LTE on any other network than the one that belongs to the branding of the phone.
Q14: I'm trying to install an OTA via the software update function but after ca. 25 % I see a read triangle with an exclamation mark and the update aborts. Why is this happening and what can I do?
A: That's the stock recovery and normally you shouldn't see that triangle during an update. If you do then your system partition isn't passing the security checks of the update. In other words your system partition isn't untouched but modified. You need to restore an untouched system partition for solving this problem. This can either be achieved by flashing a RUU or restoring a TWRP backup. If you never modified your phone and didn't buy it second-hand then this problem might be a precursor of the NAND death (c.f. the black download mode error screen in Q8).
Q15: My phone is modified and started bootlooping during normal usage. When I enter TWRP and try to wipe the phone or to re-flash the rom I'm currently using I face a lot of mounting errors. How can I fix this problem?
A: This seems to be another symptom of the NAND death (c.f. the black download mode error screen in Q8) even if you might still be able to access the Download Mode in this case. So far, it's not fixable without HTC's help. In other words: You need to send your phone to HTC's repair service if you want to keep it.
Q16: My phone is completely stock and during normal usage many/all apps started crashing (often but not always) followed by a bootloop. Now I can only enter the Bootloader since I face booting errors as soon as I try to enter the Download Mode or the Stock Recovery. How can I fix this problem?
A: This seems to be another symptom of the NAND death (c.f. the black download mode error screen in Q8). You might face a security warning while being booted to the Bootloader and the Software Status might be modified although you never tinkered with your phone in regard to rooting and/or custom roms. So far, it's not fixable without HTC's help. In other words: You need to send your phone to HTC's repair service if you want to keep it.
Q17: So I'm facing that dead nand issue and don't want to believe that there's nothing I can do in regard to a DIY repair. What are you hiding from us? There must be something I can do.
A: Believe it or not, there's nothing you can do, so far. Some users already said that they're going to buy spare parts and to repair the phone on their own. None of them reported back that they were successful. You have to accept that (at this moment) only HTC's repair service can fix your phone or that you need to buy a new one. If there was a working guide then it would be linked in this thread.
Q18: The ADB/Fastboot/HTC_Fastboot files you linked aren't working. Every time I try to "open" them via double-clicking on them they immediately close after some seconds. Fix them!
A: Strictly speaking, this is not a question, either. However, some seem to be not aware that not every *.exe file can be "opened" via double-clicking on it. You need to use ADB/Fastboot/HTC_Fastboot via a command window (c.f. the instructions in the sections on page 1).
Q19: I couldn't find a RUU or a TWRP backup in this thread that are flashable on my phone. What shall I do now?
A: You have two choices (none of them is for free). If you choose the second one you could help the community a lot by re-uploading the RUU on AFH.
Use Llabtoofer's RUU Service
Try to find a suitable RUU on websites that leak them (e.g. easy-firmware)
Q20: I urgently need the hosd.img for my phone. Where can I find it?
A: Download the correct RUU for your phone (c.f. step 1 of the guides in the RUU section). The hosd.img can get extracted from the RUU with the help of the Universal RUU Decryption Tool.
Q21: My phone is bootlooping and keeping the power button pressed for 10 seconds doesn't fix the situation. Am I lost?
A: No, HTC changed the button combo on one of the devices that are older than the M9. (Most probably due to the outrage of users that accidently rebooted their phone with the old key combo while simply carrying their phone in their pocket.) You need to keep the power button and the volume up button pressed for about 30 seconds.
Feel free to post a question in this thread if anything is still unclear after you read the all posts from the OP to this one.
Feel free to write a post as well if you know a common problem (and its solution) that should be added to this FAQ, too.
Take me back to the Overview
Take me back to the Overview
Credits (in alphabetical order)
Contributors - many thanks to all of you
alfredomorenoperez
Alternate_DM
Artume
Asselalf
Baalzaman
barashe
BiOMeX
Black-FR
buttie
Charwinger21
clsA
computerslayer
coolberry
cporeaux
Fain11
Golv
Handy-FAQ.de
h3ct0rx
hyperair
ivendor
jamieunit
k1ll3r8e
Krocko
lama81
lazyguyMC
mattlovell90
MegaGalan
migascalp
Mutasek24
Nima78600
nkk71
osiedacz
RikuXander
sardroid
sblonci65
stjepa90
SoLdieR9312
stifilz
Team Renovate
TechnicianX
warci
xunus
YANGHY
ziand_
Special Thanks to
aestivalisakito - for providing the Recovery flashable Radio files and the guide for recovering the whole internal storage after getting S-OFF
Asselalf, Krocko & warci - for the short but fun time we've been working together and all their little tips and advices
Behold_this - for the SKU, CID and MID list
beaups & jcase - for bringing some "Sunshine" into our lives
buko_s - for reminding me of the correct key combination that's needed for entering the stock recovery
Captain_Throwback - for his informative TWRP Thread, the RUU extraction tool and the instructions for installing OTAs with TWRP
Chainfire - for SuperSU
clsA - for his conversion guides
exocetdj - for starting the original Stock File Collection thread
fhartane - for confirming that downgrading with S-ON is still possible on firmware 3.x
Golv - for the ARUWizard method
Google - for ADB and Fastboot
HTC - for their USB drivers, HTC_Fastboot and HTCdev
Inside 4ndroid - for the RUU.zip extraction Guide
lizard2k5 - for the solution for the Blue Screen error
Llabtoofer - for his informative article about serialnumbers and his RUU Service
mike1986 - for his informative article about firmware versions
Nikolay82 - for the ARUWizard method
nkk71 - for the RUU extraction tool and making it possible to install OTAs with TWRP - Rest in Peace, mate!
nleitao - for confirming that the instructions in the TWRP section I can still be used with firmware 4.x
SaHiLzZ - for maintaining the Canadian Back to Stock thread
5m4r7ph0n36uru - for the RUU error list
Sneakyghost - for his informative firmware thread, his articles and the SKU, CID and MID list
The Open GApps Project - for Open GApps
thicklizard - for his custom kernel
topjohnwu - for his OTA extraction Guide and Magisk
Take me back to the Overview
recoveries, nands and otas for worldwide cids, O2 uk and germany cids, tmobile and vodafone CIDS added to first few posts thanks to @Asselalf and the dudes mentioned above again!!
Brilliant - thanks for bringing this to the m9.
The Great Dane said:
Brilliant - thanks for bringing this to the m9.
Click to expand...
Click to collapse
Cheers mate!
OTA 1.32.401.15 --> 1.40.401.8
modelid: 0PJA10000
cidnum: HTC__001
cidnum: HTC__J15
cidnum: HTC__031
cidnum: HTC__102
cidnum: HTC__A07
cidnum: HTC__032
cidnum: HTC__M27
cidnum: HTC__016
cidnum: HTC__002
cidnum: HTC__Y13
mainver: 1.40.401.8
Click to expand...
Click to collapse
Great Work ...
Awesome ...
Reminding me of my M8 ...
Mutasek24 said:
OTA 1.32.401.15 --> 1.40.401.8
Click to expand...
Click to collapse
Bit of a noob question can I flash this zip in twrp?
This is version on at moment.
C:\adb>fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_himauhl
(bootloader) version: 1.0
(bootloader) imei: ****
(bootloader) version-main: 1.32.401.15
(bootloader) boot-mode: download
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: HTC__001
all:
finished. total time: 0.016s
Sent from my HTC One M9 using XDA Free mobile app
Hi,
I am looking for free RUU 2.18.401.10 for the HTC M9 HIMAR UHL.
My CID is HTC__034 currently running 2.18.401.10 Firmware but modified system not being able to use OTA files Backup of system and boot before rooting didn't help as restoring still shows modified being unable to flash OTA manually - suckz badly...
Searching the internet for days only returns files for
1. Asian Version
h t t p s : / / w w w . androidfilehost.com/?fid=24459283995312106
h t t p s : / / w w w . androidfilehost.com/?fid=24459283995312105
2. TWRP 3.0.0.1
h t t p s : / / w w w . androidfilehost.com/?fid=24421527759889622
3. PAID Versions on e.g. ir-file host...;-(
h t t p : / / forum.a2phone.ir/download-center-new-firmware-files/574-htc-himar_ml_uhl_m60_sense70gp_htc_europe_2-18-401-10-firmware.html
h t t p s : / / w w w . ir-file.com/portal/index.php?dir=Firmware/HTC/HTC_Android/HIAUR_ML_TUHL/ (2.18.401.8)
I could offer for now for anyone who needs it
1. Full OTA 2.18.401.8 --> 2.18.401.10
2. Signed Firmware 2.18.401.8 --> 2.18.401.10 (out of OTA above)
Any help highly appreciated.
Thanks!
Michael
Huh. Can you provide a little more by the way of identifying information on your phone? I can't find anything about the CID you've mentioned. Can you provide your MID or your SKU?
Hi,
corrected some typos in above post especially regarding the Firmwareversion
Corrected Data:
M9 Prime Camera Edition - Released in Germany end of April 2016 --> I am not sure about the correct abbreviation as everyojne in this forum refers to this mobile differently. Product ID is htc_himaruhl - with an "R" in it
Firmware: 2.18.401.10 --> came with buggy 2.18.401.8 originally
Cidnum: HTC__034 --> unbranded "Europe" Version
In particular I am looking for the following
1. RUU "2PRGIMG_HIMAR_ML_UHL_M60_SENSE70GP_HTC_Europe_2.18 .401.10..."
2. Alternatively a unmodified System and Boot Dump of Version 2.18.401.8 OR 2.18.401.10 would be sufficient as well
If other data needed I will be able to provide it 2nite - I am currently at work.
Thanks for your help,
Michael
Any one here
1. with access to the above mentioned RUU?
2. or could provide me with a clean and unmodified System + Boot Backup 2.18.401.8 or 2.18.401.10 for M9 Prime Camera Edition --> Product ID HIMAR
*bump*
Still no one? ;-(
kernel: lk
product: htc_himaruhl
version: 1.0
imei: XXXXXXXXXXXX
version-main: 2.18.401.10
boot-mode: download
version-baseband: READ version-baseband ERROR
version-bootloader: 1.01.0000
mid: 2PRG10000
cid: HTC__034
Sadly, you're stuck. Pay for S-OFF (fairly surefire) or for access to the RUU collection sites (a bit iffy).
Same problem here... tried to root and always stuck at starting twrp.
Did'nt found RUU or even the stock recovery.
So I have to wait until anyone is helping because I have no idea about restore or root that crab phone....
Edit:
After I flashed TWRP my DATA-partition is cleaned and could not mount anymore. So my System is totally damaged ... now I formated the data and it could mount again. But I have no RUU to rebuild system again.
micha279 said:
*bump*
Still no one? ;-(
kernel: lk
product: htc_himaruhl
version: 1.0
imei: XXXXXXXXXXXX
version-main: 2.18.401.10
boot-mode: download
version-baseband: READ version-baseband ERROR
version-bootloader: 1.01.0000
mid: 2PRG10000
cid: HTC__034
Click to expand...
Click to collapse
Rooting is no problem with stock firmware for that phone. Just flash supersu systemless 2.71 BETA, works like a charm
My Problem is More related to a modified system partition after xposed install - which also works flawlessly! I have performed backups right after unpacking as I am not doing that the first time, had a m7 before which broke after dropping it the 30th time - RIP my m7 (
Restoring the initial backups does not help to get back to unmodified state, therefore I need a clean backup or RUU...
So far: No luck...;-(
micha279 said:
Rooting is no problem with stock firmware for that phone. Just flash supersu systemless 2.71 BETA, works like a charm
My Problem is More related to a modified system partition after xposed install - which also works flawlessly! I have performed backups right after unpacking as I am not doing that the first time, had a m7 before which broke after dropping it the 30th time - RIP my m7 (
Restoring the initial backups does not help to get back to unmodified state, therefore I need a clean backup or RUU...
So far: No luck...;-(
Click to expand...
Click to collapse
Still looking...anyone?
Sensajcon was so kind and shared his files with me, unfortunately the 2PRGIMG_HIMAR... is broken...grrr
@sensajcon can u share this file?
2PRGIMG_HIMAR_ML_UHL_M60_SENSE70GP_HTC_Europe_2.18 .401.10
Riski3Run said:
@sensajcon can u share this file?
2PRGIMG_HIMAR_ML_UHL_M60_SENSE70GP_HTC_Europe_2.18 .401.10
Click to expand...
Click to collapse
Sorry, but I tried to upload the files several times. Don't know why, but its broken anytime.
You cout got it from here:
h t t p : / / forum.a2phone.ir/download-center-new-firmware-files/574-htc-himar_ml_uhl_m60_sense70gp_htc_europe_2-18-401-10-firmware.html
Any news here? Can somebody share the related file please?
Yes.
Here u go:
https://rapidu.net/5015736911/2PRGI...U-W.T-_release_477006_combined_signed_2_4.zip
Great job. Thanks a lot.
Let me know how it works.
Having spent HOURS over HOURS now to flash RUU correctly, I thought I may share what resulted with success for me:
1. Download RUU: https://rapidu.net/5015736911/2PRGI...U-W.T-_release_477006_combined_signed_2_4.zip
2. Download HTC fastboot: https://www.androidfilehost.com/?fid=96042739161891970
3. Reboot to Download Mode
4. Optional: Set Phone to "Relocked" if you like with "fastboot oem lock"
5. fastboot oem rebootRUU
6. Flash RUU.zip with "htc_fastboot flash zip RUUZIPName.zip"
7. Enjoy
Placing ruu.zip on my SDcard having it name "2PRGIMG.zip", trying to install in Stock Recovery by selecting it from a FAT32 formatted External SDcard, etc. pp - ALL did NOT work!
Have fun
How To: Restore to Official ROM
Device: HIMAR_ML_UHL
Main Version: 2.18.401.10
MID: 2PRG10000 | CID: HTC__001, HTC__J15, HTC__034
Prepare
adb & fastboot for HTC devices
HIMAR_ML_UHL_M60_SENSE70GP_HTC_Europe_2.18.401.10_Images.zip (boot, recovery, system)
Firmware 2.18.401.10 (decrypted, S-OFF required)
Instruction
Unlock Bootloader
Reboot device to download mode
adb reboot download
fastboot oem reboot-download
Flash boot, recovery, system images
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
Flash firmware (S-OFF required)
fastboot oem rebootRUU
fastboot flash zip <firmware.zip>
fastboot oem reboot-download
Reboot
fastboot reboot
Other
RUU:
2PRGIMG_HIMAR_ML_UHL_M60_SENSE70GP_HTC_Europe_2.18.401.10_Radio_1.1550V70.2508.0304_HU[W.T]_release_477006_combined_signed_2_4.zip (thanks @Riski3Run)
TWRP: https://github.com/sabpprook/android_device_htc_himar
twrp-3.0.0-1-himar.img
twrp-3.0.2-0-himar.img
Thanks @sabpprook - but why so complicated restoring partition by partition if you link the signed RUU as well? I mean ok: You won't wipe the userdata partition - fair point. But in the end all you will get is a "dirty flashed" ROM. If you want to do so you should also consider wiping cache partition.
But in my case for example the above did not work as my partition layout seemed to be "corrupt" and also security partitions were messed up. After lock, flashing full RUU and new unlock everything worked like a charm again Most important thing I noted was that I had to use htc_fastboot for M9 which I couldn't find on HTCs official site as they only offer a very old version to download Standard fastboot from mini-sdk in latest version also will fail as it is not able to get pass HTCs size limitation for RUU...
PS: If you like I could provide you with signed firmware 2.18.401.10 as well so that S-OFF is not needed anymore. Or just extract it from the OTA I have sent you earlier - no decrypt required there
Update 2.32.401.1 is available now
HIMAR_ML_UHL it is HTC One M9 Prime Camera Edition ?